[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (vijai@) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro 0 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb1000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 to1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29448(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570340K/4159488K available (15294K kernel code, 2934K rwdata, 6584K rodata, 8576K init, 609K bss, 114012K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff80095f0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095f0000 - 0xffffff8009e50000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e50000 - 0xffffff800a12d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a12d808 - 0xffffff800a1c5f3c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001705] Console: colour dummy device 80x25 [ 0.002556] console [tty0] enabled [ 0.002583] kmemleak: Kernel memory leak detector disabled [ 0.002614] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002642] pid_max: default: 32768 minimum: 301 [ 0.003102] Security Framework initialized [ 0.003336] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003357] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004574] ftrace: allocating 47094 entries in 184 pages [ 0.174650] sched-energy: CPU device node has no sched-energy-costs [ 0.174685] ASID allocator initialised with 65536 entries [ 0.211923] tegra-id: chipid=22117. [ 0.211964] tegra-id: opt_subrevision=0. [ 0.211992] Tegra Speedo/IDDQ fuse revision 4 [ 0.212007] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212025] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212042] Tegra: CPU Speedo Value 1994, SoC Speedo Value 1885, GPU Speedo Value 1985 [ 0.212063] Tegra: CPU IDDQ Value 1376, SoC IDDQ Value 1556, GPU IDDQ Value 1825 [ 0.212097] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212122] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-mstl-neuron-a01.dts [ 0.212149] DTB Build time: Sep 26 2020 22:29:52 [ 0.261049] CPU1: Booted secondary processor [411fd071] [ 0.292963] CPU2: Booted secondary processor [411fd071] [ 0.324930] CPU3: Booted secondary processor [411fd071] [ 0.325018] Brought up 4 CPUs [ 0.325080] SMP: Total of 4 processors activated. [ 0.325098] CPU features: detected feature: 32-bit EL0 Support [ 0.325374] CPU: All CPU(s) started at EL2 [ 0.325405] alternatives: patching kernel code [ 0.333483] devtmpfs: initialized [ 0.370547] Initilizing CustomIPI irq domain [ 0.370973] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371021] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.381486] pinctrl core: initialized pinctrl subsystem [ 0.382145] OS set in device tree is not L4T. [ 0.382581] regulator-dummy: no parameters [ 0.382870] Initializing plugin-manager [ 0.382996] Plugin module not found [ 0.383244] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.383793] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.384319] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.385029] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.385539] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.386181] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.388296] node /plugin-manager/fragement@11 match with board >=3448-0002-300 [ 0.391582] NET: Registered protocol family 16 [ 0.392910] pstore: using zlib compression [ 0.393630] console [pstore-1] enabled [ 0.393648] pstore: Registered ramoops as persistent store backend [ 0.393666] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409067] cpuidle: using governor menu [ 0.413153] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.414946] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e54000) [ 0.414993] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417526] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.419738] Serial: AMBA PL011 UART driver [ 0.420263] tegra_powergate_init: DONE [ 0.420297] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-mstl-neuron-a01.dts [ 0.420326] DTB Build time: Sep 26 2020 22:29:52 [ 0.422223] Tegra reboot handler registered. [ 0.426800] iommu: Adding device tegra-carveouts to group 0 [ 0.426970] platform tegra-carveouts: domain=ffffffc0f9b5f3d8 allocates as[0]=ffffffc0f94440a8 [ 0.427333] iommu: Adding device smmu_test to group 1 [ 0.427400] platform smmu_test: domain=ffffffc0f9b5f618 allocates as[0]=ffffffc0f9444110 [ 0.428242] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.428316] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.428387] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.428412] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428451] mc-err: mcerr ops are set to t21x [ 0.438078] iommu: Adding device 70090000.xusb to group 2 [ 0.438398] iommu: Adding device 70006000.serial to group 3 [ 0.438500] platform 70006000.serial: domain=ffffffc0f94bc618 allocates as[0]=ffffffc0f9444178 [ 0.438942] iommu: Adding device 70006040.serial to group 4 [ 0.439225] iommu: Adding device 70006200.serial to group 5 [ 0.439467] iommu: Adding device sound to group 6 [ 0.439527] platform sound: domain=ffffffc0f94bcb58 allocates as[0]=ffffffc0f94441e0 [ 0.440095] iommu: Adding device 7000d400.spi to group 7 [ 0.440375] iommu: Adding device 7000d600.spi to group 8 [ 0.440730] iommu: Adding device 50000000.host1x to group 9 [ 0.441064] iommu: Adding device 54080000.vi to group 10 [ 0.441473] iommu: Adding device 54600000.isp to group 11 [ 0.441745] iommu: Adding device 54680000.isp to group 12 [ 0.442036] iommu: Adding device tegradc.0 to group 13 [ 0.442129] platform tegradc.0: domain=ffffffc0f94c9918 allocates as[0]=ffffffc0f9444248 [ 0.442667] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.443005] iommu: Adding device tegradc.1 to group 14 [ 0.443077] platform tegradc.1: domain=ffffffc0f94c9b58 allocates as[0]=ffffffc0f94442b0 [ 0.443604] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.443860] iommu: Adding device 54340000.vic to group 15 [ 0.444078] iommu: Adding device 544c0000.nvenc to group 16 [ 0.444290] iommu: Adding device 54500000.tsec to group 17 [ 0.444508] iommu: Adding device 54100000.tsecb to group 18 [ 0.444728] iommu: Adding device 54480000.nvdec to group 19 [ 0.444928] iommu: Adding device 54380000.nvjpg to group 20 [ 0.446056] iommu: Adding device 546c0000.i2c to group 21 [ 0.446414] iommu: Adding device 57000000.gpu to group 22 [ 0.446489] platform 57000000.gpu: domain=ffffffc0f94d3b58 allocates as[0]=ffffffc0f9444318 [ 0.446549] platform 57000000.gpu: domain=ffffffc0f94d3b58 allocates as[1]=ffffffc0f9444380 [ 0.446609] platform 57000000.gpu: domain=ffffffc0f94d3b58 allocates as[2]=ffffffc0f94443e8 [ 0.446671] platform 57000000.gpu: domain=ffffffc0f94d3b58 allocates as[3]=ffffffc0f9444450 [ 0.447592] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.447632] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.447659] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.447679] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.447696] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.497131] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497166] tegra-pmc: Clear bootloader IO dpd settings [ 0.497202] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497285] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497603] iommu: Adding device 70012000.se to group 23 [ 0.498381] iommu: Adding device 7000c000.i2c to group 24 [ 0.498658] iommu: Adding device 7000c400.i2c to group 25 [ 0.498920] iommu: Adding device 7000c500.i2c to group 26 [ 0.499191] iommu: Adding device 7000c700.i2c to group 27 [ 0.499460] iommu: Adding device 7000d000.i2c to group 28 [ 0.499754] iommu: Adding device 7000d100.i2c to group 29 [ 0.500027] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.500094] platform sdhci-tegra.3: domain=ffffffc0f9564cd8 allocates as[0]=ffffffc0f94444b8 [ 0.500539] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.500617] platform sdhci-tegra.2: domain=ffffffc0f9564f18 allocates as[0]=ffffffc0f9444520 [ 0.501508] iommu: Adding device 700d0000.xudc to group 32 [ 0.504854] vdd-ac-bat: 5000 mV [ 0.505264] vdd-5v0-sys: 5000 mV [ 0.506254] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.506318] vdd-5v0-hdmi: 5000 mV [ 0.506717] vdd-1v8-sys: 1800 mV [ 0.507120] vdd-fan: supplied by vdd-5v0-sys [ 0.507167] vdd-fan: 5000 mV [ 0.507609] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.507661] vdd-usb-vbus: 5000 mV [ 0.508198] vdd-usb-vbus2: 5000 mV [ 0.538738] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.541257] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.542459] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.542497] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.542551] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.542893] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.550801] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.551160] SCSI subsystem initialized [ 0.551399] libata version 3.00 loaded. [ 0.551686] usbcore: registered new interface driver usbfs [ 0.551760] usbcore: registered new interface driver hub [ 0.551855] usbcore: registered new device driver usb [ 0.555758] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.561060] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.561839] random: fast init done [ 0.562046] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564962] vdd-ddr-1v1: 1150 mV [ 0.568951] vdd-pre-reg-1v35: 1350 mV [ 0.572948] vdd-1v8: 1800 mV [ 0.576946] avdd-sys-1v2: 1200 mV [ 0.580952] vdd-pex-1v0: 1050 mV [ 0.581593] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.582160] max77620-ldo3: at 3100 mV [ 0.584952] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.585557] max77620-ldo5: at 3100 mV [ 0.588957] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592948] avdd-1v05-pll: 1050 mV [ 0.596950] avdd-io-hdmi-dp: 1050 mV [ 0.599558] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599871] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.600174] max77620 4-003c: max77620 probe successful [ 0.602840] media: Linux media interface: v0.10 [ 0.602912] Linux video capture interface: v2.00 [ 0.603964] pps_core: LinuxPPS API ver. 1 registered [ 0.603989] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.604032] PTP clock support registered [ 0.607276] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.608161] Advanced Linux Sound Architecture Driver Initialized. [ 0.608809] Bluetooth: Core ver 2.22 [ 0.608881] NET: Registered protocol family 31 [ 0.608899] Bluetooth: HCI device and connection manager initialized [ 0.608964] Bluetooth: HCI socket layer initialized [ 0.608987] Bluetooth: L2CAP socket layer initialized [ 0.609028] Bluetooth: SCO socket layer initialized [ 0.610772] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.610809] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.610868] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.610896] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.614393] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.615580] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.615665] vdd-3v3-sys: 3300 mV [ 0.615938] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.621026] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.621513] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.621573] vdd-3v3-sd: 3300 mV [ 0.622644] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.622699] avdd-io-edp-1v05: 1050 mV [ 0.623187] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.623238] vdd-usb-hub-en: 5000 mV [ 0.624808] camchar: rtcpu character device driver loaded [ 0.625647] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.626985] clocksource: Switched to clocksource arch_sys_counter [ 0.666776] VFS: Disk quotas dquot_6.6.0 [ 0.666943] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.667497] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.667921] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.667969] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.668184] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.668210] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.668238] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.668291] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.668317] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.668350] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.668373] nvmap_page_pool_init: Total RAM pages: 1011369 [ 0.668391] nvmap_page_pool_init: nvmap page pool size: 126421 pages (493 MB) [ 0.668508] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.668985] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.669884] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.678145] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.678592] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.678882] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.679157] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.679369] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.679655] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.679677] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.680120] NET: Registered protocol family 2 [ 0.681098] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.681334] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.681845] TCP: Hash tables configured (established 32768 bind 32768) [ 0.682005] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.682100] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.682540] NET: Registered protocol family 1 [ 0.683394] RPC: Registered named UNIX socket transport module. [ 0.683424] RPC: Registered udp transport module. [ 0.683441] RPC: Registered tcp transport module. [ 0.683458] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.683486] PCI: CLS 0 bytes, default 64 [ 0.683710] Trying to unpack rootfs image as initramfs... [ 0.916205] Freeing initrd memory: 5356K [ 0.926140] host1x 50000000.host1x: initialized [ 0.928070] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.931337] audit: initializing netlink subsys (disabled) [ 0.931433] audit: type=2000 audit(0.783:1): initialized [ 0.932197] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.942048] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.943584] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.944392] 9p: Installing v9fs 9p2000 file system support [ 0.947719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.947880] io scheduler noop registered [ 0.948182] io scheduler cfq registered (default) [ 0.950850] gic 702f9000.agic: GIC IRQ controller registered [ 0.953932] iommu: Adding device 702ef000.adsp to group 33 [ 0.963398] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.963576] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.964211] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x79c7c0f [ 0.964243] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.965829] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.965963] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.966075] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.966283] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.966397] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.966500] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.966626] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.966731] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.966839] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.966941] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.973046] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.974776] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.976753] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.978015] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.978386] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.979698] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.979943] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.980217] Adding domain tsec-pd to PM domain host1x-pd [ 0.982566] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.983543] tsec 54500000.tsec: initialized [ 0.985154] tsec 54100000.tsecb: initialized [ 0.985874] Adding domain nvdec-pd to PM domain host1x-pd [ 0.989466] nvdec 54480000.nvdec: initialized [ 0.990580] Adding domain vic03-pd to PM domain host1x-pd [ 0.990788] Adding domain msenc-pd to PM domain host1x-pd [ 0.990996] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.995012] falcon 54340000.vic: initialized [ 0.996298] falcon 544c0000.nvenc: initialized [ 0.997726] falcon 54380000.nvjpg: initialized [ 1.002157] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.002235] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.002289] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.002336] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.002471] display board info: id 0x0, fab 0x0 [ 1.002554] generic_infoframe_type: 0x87 [ 1.002585] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.002610] tegra_cec 70015000.tegra_cec: probed [ 1.002738] tegradc tegradc.0: DT parsed successfully [ 1.002807] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.006491] tegradc tegradc.0: probed [ 1.007308] Console: switching to colour frame buffer device 80x30 [ 1.007370] tegradc tegradc.0: fb registered [ 1.008567] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.008688] tegradc tegradc.1: No lt-data, using default setting [ 1.008733] tegradc tegradc.1: No hpd-gpio in DT [ 1.008779] tegradc tegradc.1: DT parsed successfully [ 1.008843] tegradc tegradc.1: Display dc.ffffff800ad00000 registered with id=1 [ 1.010313] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.010941] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.516491] Host read timeout at address 545c00c4 [ 1.517931] tegradc tegradc.1: probed [ 1.518365] tegradc tegradc.1: fb registered [ 1.519252] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.520027] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.520051] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.520349] kfuse 7000fc00.kfuse: initialized [ 1.521261] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.521604] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.521629] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.521651] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.521677] tegradc tegradc.1: blank - powerdown [ 1.521710] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.521728] Extcon DP: HPD disabled [ 1.521740] hpd: hpd_switch 0 [ 1.521753] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.521772] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.521789] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.522126] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.523113] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.523141] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.523535] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.524868] vdd-gpu: applied init 1000000uV constraint [ 1.524891] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.525252] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.528641] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.528773] No Device Node present for smmu client: serial8250 !! [ 1.528795] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.528853] iommu: Adding device serial8250 to group 35 [ 1.531356] console [ttyS0] disabled [ 1.531474] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 2.008240] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.008246] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.020294] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.440853] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.845237] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.847255] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.953440] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.953450] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.953455] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.953460] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.953465] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.953505] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.953614] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.953845] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.954001] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.954032] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.954065] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.954087] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.954229] pci 0000:01:00.0: supports D1 D2 [ 2.954233] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.963053] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.963103] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.963109] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.963118] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.963139] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.963157] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.963168] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.963174] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.963182] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.963516] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.963520] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.963527] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.963669] aer 0000:00:02.0:pcie002: service driver aer loaded [ 4.085371] console [ttyS0] enabled [ 4.090145] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 4.099353] serial-tegra 70006200.serial: RX in PIO mode [ 4.104774] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 4.114750] [drm] Initialized [ 4.127880] brd: module loaded [ 4.136432] loop: module loaded [ 4.139727] tegra_profiler: version: 1.141, samples/io: 48/28 [ 4.145608] tegra_profiler: auth: init [ 4.150733] THERMAL EST: found 2 subdevs [ 4.154774] THERMAL EST num_resources: 0 [ 4.158716] [THERMAL EST subdev 0] [ 4.162132] [THERMAL EST subdev 1] [ 4.166005] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 4.174983] THERMAL EST: thz register success. [ 4.179584] THERMAL EST: end of probe, return err: 0 [ 4.185715] sd: No Scsi addr parsed to reserve index [ 4.190751] hisi_sas: driver version v1.6 [ 4.201245] libphy: Fixed MDIO Bus: probed [ 4.206167] tun: Universal TUN/TAP device driver, 1.6 [ 4.211264] tun: (C) 1999-2004 Max Krasnyansky [ 4.218536] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.224400] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.230423] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.237396] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.243030] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.250871] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.256853] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 4.263851] Copyright(c) 1999 - 2017 Intel Corporation. [ 4.270101] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 4.275993] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 4.303395] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 4.315827] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ea:47:10 from device tree [ 4.328329] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.339781] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.371173] PPP generic driver version 2.4.2 [ 4.375661] PPP BSD Compression module registered [ 4.380380] PPP Deflate Compression module registered [ 4.385478] PPP MPPE Compression module registered [ 4.390278] NET: Registered protocol family 24 [ 4.394803] usbcore: registered new interface driver r8152 [ 4.400342] usbcore: registered new interface driver asix [ 4.405815] usbcore: registered new interface driver ax88179_178a [ 4.411952] usbcore: registered new interface driver cdc_ether [ 4.417831] usbcore: registered new interface driver net1080 [ 4.423536] usbcore: registered new interface driver cdc_subset [ 4.429501] usbcore: registered new interface driver zaurus [ 4.435132] usbcore: registered new interface driver cdc_ncm [ 4.440968] VFIO - User Level meta-driver version: 0.3 [ 4.447356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.453924] ehci-pci: EHCI PCI platform driver [ 4.458428] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.464622] ohci-pci: OHCI PCI platform driver [ 4.469117] ohci-platform: OHCI generic platform driver [ 4.476941] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 4.483320] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 4.491662] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90dd800 id [ 4.500282] usbcore: registered new interface driver uas [ 4.505652] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 4.505701] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.505722] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 4.506476] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 4.506539] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 4.506750] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.506756] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.506760] usb usb1: Product: xHCI Host Controller [ 4.506764] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 4.506767] usb usb1: SerialNumber: 70090000.xusb [ 4.507378] hub 1-0:1.0: USB hub found [ 4.507419] hub 1-0:1.0: 5 ports detected [ 4.507961] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.507972] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 4.508047] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.508145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.508150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.508154] usb usb2: Product: xHCI Host Controller [ 4.508157] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 4.508160] usb usb2: SerialNumber: 70090000.xusb [ 4.508581] hub 2-0:1.0: USB hub found [ 4.508611] hub 2-0:1.0: 4 ports detected [ 4.611151] usb usb1: usb_suspend_both: status 0 [ 4.645106] usbcore: registered new interface driver usb-storage [ 4.651258] usbcore: registered new interface driver usbserial [ 4.660582] tegra-xudc-new 700d0000.xudc: device count: 1 [ 4.667292] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 4.674022] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 4.679309] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.684789] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.687639] mousedev: PS/2 mouse device common for all mice [ 4.687741] usbcore: registered new interface driver xpad [ 4.831227] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.841031] rtc rtc1: alarm rtc device [ 4.844824] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 4.852000] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 4.858717] i2c /dev entries driver [ 4.864075] i2c i2c-6: Added multiplexed i2c bus 7 [ 4.869267] i2c i2c-6: Added multiplexed i2c bus 8 [ 4.874079] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 4.881889] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.911169] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 4.917804] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.925320] imx219 7-0010: board setup failed [ 4.929782] imx219: probe of 7-0010 failed with error -121 [ 4.935809] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.965029] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 4.971645] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.979183] imx219 8-0010: board setup failed [ 4.983609] imx219: probe of 8-0010 failed with error -121 [ 4.990372] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.999727] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 5.006816] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 5.014226] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.023557] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 5.032533] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 5.041550] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.050873] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 5.059840] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 5.068869] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.078187] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 5.087156] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 5.095166] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 5.103027] tegra_aotag tegra-aotag: Registering sensor 0 [ 5.108533] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 5.113784] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 5.120280] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.129622] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 5.137851] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 5.146623] parse_throttle_dt_data: Num cap clks = 6 [ 5.151603] parse_throttle_dt_data: clk=cclk_g type=2 [ 5.156677] parse_throttle_dt_data: clk=gpu type=4 [ 5.161497] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 5.167618] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 5.173737] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 5.179752] parse_throttle_dt_data: clk=emc type=3 [ 5.184921] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.194342] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.203804] tegra_throttle_probe: probe successful. #cdevs=4 [ 5.210244] FAN dev name: pwm-fan [ 5.213654] FAN:gpio request success. [ 5.217395] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 5.223376] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 5.230159] pwm_fan_driver pwm-fan: fan tach request irq success [ 5.236184] pwm_fan_driver pwm-fan: tach period: 1000 [ 5.241340] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 5.248919] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 5.256671] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 5.264504] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 5.272341] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 5.280174] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 5.288012] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 5.295847] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 5.303690] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 5.311613] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 5.320311] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 5.329024] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 5.337844] device-mapper: uevent: version 1.0.3 [ 5.342953] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 5.356685] tegra210-cpufreq cpufreq: probe()...completed [ 5.362876] sdhci: Secure Digital Host Controller Interface driver [ 5.369057] sdhci: Copyright(c) Pierre Ossman [ 5.373415] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.383110] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 5.398590] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 5.410051] tegra-se 70012000.se: tegra_se_probe: complete [ 5.416070] hidraw: raw HID events driver (C) Jiri Kosina [ 5.422662] usbcore: registered new interface driver usbhid [ 5.428251] usbhid: USB HID core driver [ 5.434181] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 5.440801] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 5.443005] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 5.450983] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 5.469527] nvpmodel: initialized successfully [ 5.475157] usbcore: registered new interface driver snd-usb-audio [ 5.481416] No Device Node present for smmu client: snd-soc-dummy !! [ 5.487783] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 5.497973] iommu: Adding device snd-soc-dummy to group 36 [ 5.504827] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.511781] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 5.526634] OPE platform probe [ 5.527296] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.531483] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.531608] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.535785] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 5.536883] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 5.559422] OPE platform probe successful [ 5.563730] OPE platform probe [ 5.566860] OPE platform probe successful [ 5.595559] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.601462] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.607335] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.613202] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.619077] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.624960] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.630821] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.636687] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.642569] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.648429] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.666316] u32 classifier [ 5.669042] Actions configured [ 5.672515] Initializing XFRM netlink socket [ 5.677489] NET: Registered protocol family 10 [ 5.682640] NET: Registered protocol family 17 [ 5.687100] NET: Registered protocol family 15 [ 5.691618] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.704610] Bluetooth: RFCOMM socket layer initialized [ 5.709756] Bluetooth: RFCOMM ver 1.11 [ 5.713508] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.719427] Bluetooth: HIDP socket layer initialized [ 5.724407] 9pnet: Installing 9P2000 support [ 5.728710] Key type dns_resolver registered [ 5.733404] Registered cp15_barrier emulation handler [ 5.738510] Registered setend emulation handler [ 5.744644] registered taskstats version 1 [ 5.749320] Adding domain ve2-pd to PM domain host1x-pd [ 5.754799] Adding domain ve-pd to PM domain host1x-pd [ 5.761997] isp 54600000.isp: initialized [ 5.766959] isp 54680000.isp: initialized [ 5.780884] last reset is due to power on reset [ 5.785436] KERNEL: PMC reset status reg: 0x0 [ 5.789866] BL: PMC reset status reg: 0x0 [ 5.793877] BL: PMIC poweroff Event Recorder: 0x40 [ 5.800145] clk_cbus_recalc_rate: no gbus parent [ 5.804777] clk_cbus_round_rate: no gbus parent [ 5.809311] clk_cbus_round_rate: no gbus parent [ 5.813846] clk_cbus_recalc_rate: no gbus parent [ 5.818553] clk_cbus_recalc_rate: no gbus parent [ 5.823185] clk_cbus_round_rate: no gbus parent [ 5.827716] clk_cbus_round_rate: no gbus parent [ 5.832245] clk_cbus_recalc_rate: no gbus parent [ 5.836873] tegra_dvfs: GPU-cap: registered [ 5.841107] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 5.849800] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 5.858581] tegra dvfs: vdd-gpu: nominal 1088mV, offset 708000uV, step 10000uV, scaling enabled [ 5.868645] tegra_dvfs: vdd-gpu-vts: registered [ 5.873877] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 5.883727] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 5.893137] input: gpio-keys as /devices/gpio-keys/input/input1 [ 5.931943] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 5.941625] vi 54080000.vi: vi_probe: ++ [ 5.948447] vi 54080000.vi: initialized [ 5.954333] vi 54080000.vi: subdev nvcsi--2 bound [ 5.959152] vi 54080000.vi: subdev nvcsi--1 bound [ 5.964089] mmcblk mmc0:0001: Card claimed for testing. [ 5.970602] Disable partitions left on by BL [ 5.974895] disb [ 5.976956] bwmgr: missing cdev-type property [ 5.981409] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.990756] DRAM derating cdev registered. [ 5.995861] vdd-fan: disabling [ 5.998913] vdd-usb-vbus: disabling [ 6.002414] vdd-usb-vbus2: disabling [ 6.005999] vddio-sdmmc-ap: disabling [ 6.009741] vdd-3v3-sd: disabling [ 6.013064] avdd-io-edp-1v05: disabling [ 6.016900] vdd-usb-hub-en: disabling [ 6.020650] ALSA device list: [ 6.023620] #0: tegra-hda at 0x70038000 irq 82 [ 6.028238] #1: tegra-snd-t210ref-mobile-rt565x [ 6.036062] Freeing unused kernel memory: 8576K [ 6.061080] Root device found: mmcblk0p1 [ 6.066073] Found dev node: /dev/mmcblk0p1 [ 6.219007] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 6.224332] EXT4-fs (mmcblk0p1): recovery complete [ 6.242709] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.251611] Rootfs mounted over mmcblk0p1 [ 6.269802] Switching from initrd to actual rootfs [ 6.359839] systemd[1]: System time before build time, advancing clock. [ 6.391392] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.408102] cgroup: cgroup2: unknown option "nsdelegate" [ 6.420339] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ) [ 6.442438] systemd[1]: Detected architecture arm64. [ 6.472431] systemd[1]: No hostname configured. [ 6.477029] systemd[1]: Set hostname to . [ 6.562260] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support B. [ 6.579328] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.687421] random: systemd: uninitialized urandom read (16 bytes read) [ 6.694319] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.702108] random: systemd: uninitialized urandom read (16 bytes read) [ 6.710302] systemd[1]: Created slice User and Session Slice. [ 6.716188] random: systemd: uninitialized urandom read (16 bytes read) [ 6.722829] systemd[1]: Reached target User and Group Name Lookups. [ 6.730010] systemd[1]: Created slice System Slice. [ 6.797909] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.945138] systemd-journald[1973]: Received request to flush runtime journal from PID 1 [ 7.395602] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 7.984720] using random self ethernet address [ 8.004475] using random host ethernet address [ 8.060990] random: crng init done [ 8.064398] random: 7 urandom warning(s) missed due to ratelimiting [ 8.676344] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 8.676350] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 8.775207] usb usb2: usb_suspend_both: status 0 [ 11.123032] tegra-xusb 70090000.xusb: entering ELPG [ 11.124061] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 11.124260] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 11.125880] tegra-xusb 70090000.xusb: entering ELPG done [ 11.176785] zram: Added device: zram0 [ 11.179535] zram: Added device: zram1 [ 11.183603] zram: Added device: zram2 [ 11.186206] zram: Added device: zram3 [ 11.220760] zram0: detected capacity change from 0 to 519606272 [ 11.289812] Adding 507424k swap on /dev/zram0. Priority:5 extents:1 across:507424k SS [ 11.293205] zram1: detected capacity change from 0 to 519606272 [ 11.305358] Adding 507424k swap on /dev/zram1. Priority:5 extents:1 across:507424k SS [ 11.309509] zram2: detected capacity change from 0 to 519606272 [ 11.324445] Adding 507424k swap on /dev/zram2. Priority:5 extents:1 across:507424k SS [ 11.328295] zram3: detected capacity change from 0 to 519606272 [ 11.349956] Adding 507424k swap on /dev/zram3. Priority:5 extents:1 across:507424k SS [ 11.557978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.559629] eth0: 0xffffff800a38c000, 00:04:4b:ea:47:10, IRQ 406 [ 11.695408] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.747772] r8168: eth0: link up [ 13.747800] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.542874] tegradc tegradc.0: blank - powerdown [ 14.542884] tegradc tegradc.1: blank - powerdown [ 15.029652] fuse init (API version 7.26)