[ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001644] Console: colour dummy device 80x25 [ 0.001656] console [tty0] enabled [ 0.001662] bootconsole [uart8250] disabled [ 0.001683] kmemleak: Kernel memory leak detector disabled [ 0.001702] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001715] pid_max: default: 32768 minimum: 301 [ 0.002160] Security Framework initialized [ 0.002383] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002393] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003543] ftrace: allocating 47077 entries in 184 pages [ 0.172985] sched-energy: CPU device node has no sched-energy-costs [ 0.173020] ASID allocator initialised with 65536 entries [ 0.211875] tegra-id: chipid=22117. [ 0.211888] tegra-id: opt_subrevision=0. [ 0.211905] Tegra Speedo/IDDQ fuse revision 4 [ 0.211911] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211916] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.211922] Tegra: CPU Speedo Value 2072, SoC Speedo Value 1972, GPU Speedo Value 2071 [ 0.211927] Tegra: CPU IDDQ Value 2212, SoC IDDQ Value 2396, GPU IDDQ Value 2955 [ 0.211946] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.211962] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.211970] DTB Build time: Feb 19 2022 09:01:46 [ 0.261094] CPU1: Booted secondary processor [411fd071] [ 0.293012] CPU2: Booted secondary processor [411fd071] [ 0.324977] CPU3: Booted secondary processor [411fd071] [ 0.325063] Brought up 4 CPUs [ 0.325069] SMP: Total of 4 processors activated. [ 0.325078] CPU features: detected feature: 32-bit EL0 Support [ 0.325343] CPU: All CPU(s) started at EL2 [ 0.325360] alternatives: patching kernel code [ 0.333820] devtmpfs: initialized [ 0.372511] Initilizing CustomIPI irq domain [ 0.372835] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372854] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384432] pinctrl core: initialized pinctrl subsystem [ 0.385039] OS set in device tree is not L4T. [ 0.385560] regulator-dummy: no parameters [ 0.385838] Initializing plugin-manager [ 0.386006] Plugin module not found [ 0.386200] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.386717] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.387698] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387905] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.388532] node /plugin-manager/fragement@13 match with board >=3448-0000-300 [ 0.392281] NET: Registered protocol family 16 [ 0.393675] pstore: using zlib compression [ 0.393718] console [pstore-1] enabled [ 0.393723] pstore: Registered ramoops as persistent store backend [ 0.393728] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409103] cpuidle: using governor menu [ 0.413183] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.414849] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.414872] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417692] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.420002] Serial: AMBA PL011 UART driver [ 0.420522] tegra_powergate_init: DONE [ 0.420536] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.420542] DTB Build time: Feb 19 2022 09:01:46 [ 0.422447] Tegra reboot handler registered. [ 0.427007] iommu: Adding device tegra-carveouts to group 0 [ 0.427151] platform tegra-carveouts: domain=ffffffc0f9bd63d8 allocates as[0]=ffffffc0f9bd80a8 [ 0.427514] iommu: Adding device smmu_test to group 1 [ 0.427572] platform smmu_test: domain=ffffffc0f9bd6618 allocates as[0]=ffffffc0f9bd8110 [ 0.428394] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.428451] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.428510] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.428519] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428540] mc-err: mcerr ops are set to t21x [ 0.439232] iommu: Adding device 70090000.xusb to group 2 [ 0.439506] iommu: Adding device 70006000.serial to group 3 [ 0.439585] platform 70006000.serial: domain=ffffffc0f94c6558 allocates as[0]=ffffffc0f9bd8178 [ 0.440023] iommu: Adding device 70006040.serial to group 4 [ 0.440296] iommu: Adding device 70006200.serial to group 5 [ 0.440523] iommu: Adding device sound to group 6 [ 0.440570] platform sound: domain=ffffffc0f94c6a98 allocates as[0]=ffffffc0f9bd81e0 [ 0.441285] iommu: Adding device 7000d400.spi to group 7 [ 0.441545] iommu: Adding device 7000d600.spi to group 8 [ 0.441821] iommu: Adding device 70410000.spi to group 9 [ 0.442130] iommu: Adding device 50000000.host1x to group 10 [ 0.442401] iommu: Adding device 54080000.vi to group 11 [ 0.442788] iommu: Adding device 54600000.isp to group 12 [ 0.443082] iommu: Adding device 54680000.isp to group 13 [ 0.443359] iommu: Adding device tegradc.0 to group 14 [ 0.443412] platform tegradc.0: domain=ffffffc0f94d19d8 allocates as[0]=ffffffc0f9bd8248 [ 0.447604] platform tegradc.0: IOVA linear map 0x0000000092ca9000(800000) [ 0.447993] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.448337] iommu: Adding device tegradc.1 to group 15 [ 0.448384] platform tegradc.1: domain=ffffffc0f94d1c18 allocates as[0]=ffffffc0f9bd82b0 [ 0.452578] platform tegradc.1: IOVA linear map 0x0000000092ca9000(800000) [ 0.452965] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.453225] iommu: Adding device 54340000.vic to group 16 [ 0.453429] iommu: Adding device 544c0000.nvenc to group 17 [ 0.453634] iommu: Adding device 54500000.tsec to group 18 [ 0.453830] iommu: Adding device 54100000.tsecb to group 19 [ 0.454051] iommu: Adding device 54480000.nvdec to group 20 [ 0.454255] iommu: Adding device 54380000.nvjpg to group 21 [ 0.455290] iommu: Adding device 546c0000.i2c to group 22 [ 0.455615] iommu: Adding device 57000000.gpu to group 23 [ 0.455667] platform 57000000.gpu: domain=ffffffc0f9501c18 allocates as[0]=ffffffc0f9bd8318 [ 0.455705] platform 57000000.gpu: domain=ffffffc0f9501c18 allocates as[1]=ffffffc0f9bd8380 [ 0.455747] platform 57000000.gpu: domain=ffffffc0f9501c18 allocates as[2]=ffffffc0f9bd83e8 [ 0.455806] platform 57000000.gpu: domain=ffffffc0f9501c18 allocates as[3]=ffffffc0f9bd8450 [ 0.456675] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.456687] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.456701] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.456704] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.456708] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.509186] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.509196] tegra-pmc: Clear bootloader IO dpd settings [ 0.509216] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.509279] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.509583] iommu: Adding device 70012000.se to group 24 [ 0.510145] iommu: Adding device 1003000.pcie to group 25 [ 0.510199] platform 1003000.pcie: domain=ffffffc0f956a498 allocates as[0]=ffffffc0f9bd84b8 [ 0.510666] iommu: Adding device 7000c000.i2c to group 26 [ 0.510924] iommu: Adding device 7000c400.i2c to group 27 [ 0.511173] iommu: Adding device 7000c500.i2c to group 28 [ 0.511422] iommu: Adding device 7000c700.i2c to group 29 [ 0.511676] iommu: Adding device 7000d000.i2c to group 30 [ 0.511927] iommu: Adding device 7000d100.i2c to group 31 [ 0.512219] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.512277] platform sdhci-tegra.0: domain=ffffffc0f9501f18 allocates as[0]=ffffffc0f9bd8520 [ 0.513180] iommu: Adding device 700d0000.xudc to group 33 [ 0.516464] vdd-ac-bat: 5000 mV [ 0.516843] vdd-5v0-sys: 5000 mV [ 0.517530] vdd-5v0-hdmi: 5000 mV [ 0.517979] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.518236] vdd-1v8-sys: 1800 mV [ 0.518685] vdd-fan: 5000 mV [ 0.518909] vdd-fan: supplied by vdd-5v0-sys [ 0.519118] vdd-usb-vbus: 5000 mV [ 0.519336] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.519666] vdd-usb-vbus2: 5000 mV [ 0.549904] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552179] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.553356] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.553387] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.553407] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.553752] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.562361] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.562723] SCSI subsystem initialized [ 0.562917] libata version 3.00 loaded. [ 0.563187] usbcore: registered new interface driver usbfs [ 0.563237] usbcore: registered new interface driver hub [ 0.563277] usbcore: registered new device driver usb [ 0.567412] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.572356] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.572513] random: fast init done [ 0.573441] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.576251] vdd-ddr-1v1: 1150 mV [ 0.580258] vdd-pre-reg-1v35: 1350 mV [ 0.584247] vdd-1v8: 1800 mV [ 0.588239] avdd-sys-1v2: 1200 mV [ 0.592245] vdd-pex-1v0: 1050 mV [ 0.592911] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.593447] max77620-ldo3: at 3100 mV [ 0.596247] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.596785] max77620-ldo5: at 3100 mV [ 0.600245] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.604240] avdd-1v05-pll: 1050 mV [ 0.608244] avdd-io-hdmi-dp: 1050 mV [ 0.610933] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.611252] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.611558] max77620 4-003c: max77620 probe successful [ 0.614390] media: Linux media interface: v0.10 [ 0.614451] Linux video capture interface: v2.00 [ 0.615440] pps_core: LinuxPPS API ver. 1 registered [ 0.615447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.615476] PTP clock support registered [ 0.618664] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.619465] Advanced Linux Sound Architecture Driver Initialized. [ 0.620133] Bluetooth: Core ver 2.22 [ 0.620189] NET: Registered protocol family 31 [ 0.620194] Bluetooth: HCI device and connection manager initialized [ 0.620210] Bluetooth: HCI socket layer initialized [ 0.620280] Bluetooth: L2CAP socket layer initialized [ 0.620334] Bluetooth: SCO socket layer initialized [ 0.622150] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.622167] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.622216] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.622231] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.625786] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.626899] vdd-3v3-sys: 3300 mV [ 0.627278] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.627329] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.629099] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.629548] vdd-3v3-sd: 3300 mV [ 0.629933] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.630730] avdd-io-edp-1v05: 1050 mV [ 0.631083] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.631222] vdd-usb-hub-en: 5000 mV [ 0.631568] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.632711] camchar: rtcpu character device driver loaded [ 0.633719] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.635105] clocksource: Switched to clocksource arch_sys_counter [ 0.675854] VFS: Disk quotas dquot_6.6.0 [ 0.675982] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.676466] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676948] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.676968] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.677188] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.677194] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.677206] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.677245] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.677252] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.677265] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.677274] nvmap_page_pool_init: Total RAM pages: 1008854 [ 0.677280] nvmap_page_pool_init: nvmap page pool size: 126106 pages (492 MB) [ 0.677375] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677880] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.678941] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.687183] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.687624] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.687988] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.688260] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.688442] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.688732] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.688738] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.689167] NET: Registered protocol family 2 [ 0.690205] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.690423] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.690963] TCP: Hash tables configured (established 32768 bind 32768) [ 0.691223] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691305] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691736] NET: Registered protocol family 1 [ 0.692355] RPC: Registered named UNIX socket transport module. [ 0.692359] RPC: Registered udp transport module. [ 0.692363] RPC: Registered tcp transport module. [ 0.692367] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.692381] PCI: CLS 0 bytes, default 64 [ 0.692614] Trying to unpack rootfs image as initramfs... [ 0.999292] Freeing initrd memory: 6992K [ 1.009293] host1x 50000000.host1x: initialized [ 1.011312] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.014553] audit: initializing netlink subsys (disabled) [ 1.014626] audit: type=2000 audit(0.859:1): initialized [ 1.015361] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.025221] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.026673] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.027515] 9p: Installing v9fs 9p2000 file system support [ 1.030803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.030921] io scheduler noop registered [ 1.031257] io scheduler cfq registered (default) [ 1.034057] gic 702f9000.agic: GIC IRQ controller registered [ 1.037224] iommu: Adding device 702ef000.adsp to group 34 [ 1.046483] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 1.046635] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.047314] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0xaacb418 [ 1.047323] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.048979] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.049089] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.049185] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.049374] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.049467] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.049552] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.049643] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.049733] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.049824] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.049910] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.056136] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.057797] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.059799] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.061096] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.061455] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.062712] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.062938] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.063333] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.063369] Adding domain tsec-pd to PM domain host1x-pd [ 1.066544] tsec 54500000.tsec: initialized [ 1.068037] tsec 54100000.tsecb: initialized [ 1.068785] Adding domain nvdec-pd to PM domain host1x-pd [ 1.072170] nvdec 54480000.nvdec: initialized [ 1.073242] Adding domain vic03-pd to PM domain host1x-pd [ 1.073431] Adding domain msenc-pd to PM domain host1x-pd [ 1.073589] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.077592] falcon 54340000.vic: initialized [ 1.078895] falcon 544c0000.nvenc: initialized [ 1.080317] falcon 54380000.nvjpg: initialized [ 1.084651] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.084701] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.084733] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.084777] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.084876] display board info: id 0x0, fab 0x0 [ 1.084936] generic_infoframe_type: 0x87 [ 1.085006] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.085011] tegra_cec 70015000.tegra_cec: probed [ 1.085094] tegradc tegradc.0: DT parsed successfully [ 1.085143] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.085684] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.092787] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.097646] tegradc tegradc.0: probed [ 1.098462] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.100200] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.100216] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.100902] kfuse 7000fc00.kfuse: initialized [ 1.102521] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.103653] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.105201] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.105217] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.105697] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.107493] vdd-gpu: applied init 1000000uV constraint [ 1.107509] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.107973] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.113208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.113376] No Device Node present for smmu client: serial8250 !! [ 1.113392] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.113455] iommu: Adding device serial8250 to group 36 [ 1.117223] console [ttyS0] disabled [ 1.117409] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.117574] console [ttyS0] enabled [ 1.118855] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.119398] serial-tegra 70006200.serial: RX in PIO mode [ 1.119533] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.120905] [drm] Initialized [ 1.130346] Console: switching to colour frame buffer device 240x67 [ 1.130476] tegradc tegradc.0: fb registered [ 1.133575] brd: module loaded [ 1.137880] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.137939] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.138519] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.138531] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.139371] loop: module loaded [ 1.139470] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.139610] tegra_profiler: auth: init [ 1.140901] THERMAL EST: found 2 subdevs [ 1.140913] THERMAL EST num_resources: 0 [ 1.140920] [THERMAL EST subdev 0] [ 1.140927] [THERMAL EST subdev 1] [ 1.141392] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.141396] THERMAL EST: thz register success. [ 1.141560] THERMAL EST: end of probe, return err: 0 [ 1.142837] sd: No Scsi addr parsed to reserve index [ 1.142882] hisi_sas: driver version v1.6 [ 1.148274] tegra-qspi 70410000.spi: Prod settings list not found [ 1.149504] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.149515] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.152598] libphy: Fixed MDIO Bus: probed [ 1.153559] tun: Universal TUN/TAP device driver, 1.6 [ 1.153564] tun: (C) 1999-2004 Max Krasnyansky [ 1.154645] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.154650] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.154703] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.154707] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.154756] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.154760] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.154808] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.154811] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.156153] PPP generic driver version 2.4.2 [ 1.156362] PPP BSD Compression module registered [ 1.156369] PPP Deflate Compression module registered [ 1.156412] PPP MPPE Compression module registered [ 1.156420] NET: Registered protocol family 24 [ 1.156500] usbcore: registered new interface driver r8152 [ 1.156549] usbcore: registered new interface driver asix [ 1.156598] usbcore: registered new interface driver ax88179_178a [ 1.156638] usbcore: registered new interface driver cdc_ether [ 1.156676] usbcore: registered new interface driver net1080 [ 1.156721] usbcore: registered new interface driver cdc_subset [ 1.156762] usbcore: registered new interface driver zaurus [ 1.156821] usbcore: registered new interface driver cdc_ncm [ 1.156997] VFIO - User Level meta-driver version: 0.3 [ 1.158303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.158329] ehci-pci: EHCI PCI platform driver [ 1.158376] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.158389] ohci-pci: OHCI PCI platform driver [ 1.158437] ohci-platform: OHCI generic platform driver [ 1.161355] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.161986] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.163238] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9719c00 id [ 1.165241] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.165250] Extcon AUX1(HDMI) enable [ 1.165749] usbcore: registered new interface driver uas [ 1.165826] usbcore: registered new interface driver usb-storage [ 1.165970] usbcore: registered new interface driver usbserial [ 1.166234] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.166294] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.166332] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.166366] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.166393] tegradc tegradc.1: No lt-data, using default setting [ 1.166432] tegradc tegradc.1: No hpd-gpio in DT [ 1.166486] tegradc tegradc.1: DT parsed successfully [ 1.166540] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1 [ 1.167250] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.167321] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.167724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.167732] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.167738] usb usb1: Product: xHCI Host Controller [ 1.167743] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.167748] usb usb1: SerialNumber: 70090000.xusb [ 1.168374] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.168444] hub 1-0:1.0: USB hub found [ 1.168551] hub 1-0:1.0: 5 ports detected [ 1.169265] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.169278] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.169371] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.169477] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.169483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.169487] usb usb2: Product: xHCI Host Controller [ 1.169491] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.169495] usb usb2: SerialNumber: 70090000.xusb [ 1.169992] hub 2-0:1.0: USB hub found [ 1.170029] hub 2-0:1.0: 4 ports detected [ 1.170847] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.170852] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.170941] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.172969] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.172982] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.173017] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.173315] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.174100] mousedev: PS/2 mouse device common for all mice [ 1.174220] usbcore: registered new interface driver xpad [ 1.181933] tegradc tegradc.1: probed [ 1.185279] tegradc tegradc.1: fb registered [ 1.188476] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.188482] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.188492] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.188506] tegradc tegradc.1: blank - powerdown [ 1.188523] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.188528] Extcon DP: HPD disabled [ 1.188532] hpd: hpd_switch 0 [ 1.188536] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.188544] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.188552] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.203532] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.271213] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.271510] usb usb2: usb_suspend_both: status 0 [ 1.298630] tegradc tegradc.0: blank - powerdown [ 1.303979] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.306135] rtc rtc1: alarm rtc device [ 1.306148] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.306176] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.306547] i2c /dev entries driver [ 1.308142] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.308499] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.308504] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.309072] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.332367] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.332449] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.332517] imx219 7-0010: board setup failed [ 1.332569] imx219: probe of 7-0010 failed with error -121 [ 1.333003] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.338548] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.338550] Extcon AUX1(HDMI) disable [ 1.356278] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.356354] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.356411] imx219 8-0010: board setup failed [ 1.356458] imx219: probe of 8-0010 failed with error -121 [ 1.357424] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.359556] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.359561] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.360133] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.360153] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.360163] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.360315] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.360327] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.360335] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.360483] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.360494] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.360500] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.360685] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.361821] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.361891] tegra_aotag tegra-aotag: Invalid temp readout [ 1.361919] tegra_aotag tegra-aotag: Invalid temp readout [ 1.361936] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.361944] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.363179] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.363198] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.363424] tegra_aotag tegra-aotag: Invalid temp readout [ 1.363456] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.364019] parse_throttle_dt_data: Num cap clks = 6 [ 1.364024] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.364040] parse_throttle_dt_data: clk=gpu type=4 [ 1.364069] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.364089] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.364109] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.364112] parse_throttle_dt_data: clk=emc type=3 [ 1.364593] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.364750] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.364971] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.365953] FAN dev name: pwm-fan [ 1.366043] FAN:gpio request success. [ 1.366117] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.366535] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.366737] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.366744] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.366849] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.366854] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.366859] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.366863] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.366867] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.366871] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.366875] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.366879] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.366884] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.366889] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.370022] device-mapper: uevent: version 1.0.3 [ 1.370492] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.370797] tegradc tegradc.0: unblank [ 1.375012] tegra210-cpufreq cpufreq: probe()...completed [ 1.376052] sdhci: Secure Digital Host Controller Interface driver [ 1.376053] sdhci: Copyright(c) Pierre Ossman [ 1.376054] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.376600] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.377042] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.377173] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.381934] tegra-se 70012000.se: tegra_se_probe: complete [ 1.382624] hidraw: raw HID events driver (C) Jiri Kosina [ 1.383913] usbcore: registered new interface driver usbhid [ 1.383915] usbhid: USB HID core driver [ 1.386144] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.386310] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.388301] nvpmodel: initialized successfully [ 1.389355] usbcore: registered new interface driver snd-usb-audio [ 1.389411] No Device Node present for smmu client: snd-soc-dummy !! [ 1.389415] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.389433] iommu: Adding device snd-soc-dummy to group 37 [ 1.394719] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.414353] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.414405] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.415186] OPE platform probe [ 1.415267] OPE platform probe successful [ 1.415532] OPE platform probe [ 1.415560] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.415617] OPE platform probe successful [ 1.423420] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.440666] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.440799] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.440926] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.441060] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.441208] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.441339] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.441465] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.441592] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.441714] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.441842] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.450349] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.450351] Extcon AUX1(HDMI) enable [ 1.453857] u32 classifier [ 1.453858] Actions configured [ 1.453935] Initializing XFRM netlink socket [ 1.454630] NET: Registered protocol family 10 [ 1.455298] NET: Registered protocol family 17 [ 1.455307] NET: Registered protocol family 15 [ 1.455380] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.455425] Bluetooth: RFCOMM socket layer initialized [ 1.455434] Bluetooth: RFCOMM ver 1.11 [ 1.455439] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.455443] Bluetooth: HIDP socket layer initialized [ 1.455460] 9pnet: Installing 9P2000 support [ 1.455495] Key type dns_resolver registered [ 1.455877] Registered cp15_barrier emulation handler [ 1.455883] Registered setend emulation handler [ 1.456945] registered taskstats version 1 [ 1.457214] snd_hda_codec_hdmi hdaudioC0D3: HDMI: audio coding type 0 not expected [ 1.457217] snd_hda_codec_hdmi hdaudioC0D3: HDMI: audio coding type 0 not expected [ 1.457219] snd_hda_codec_hdmi hdaudioC0D3: HDMI: audio coding type 0 not expected [ 1.457449] Adding domain ve2-pd to PM domain host1x-pd [ 1.457706] Adding domain ve-pd to PM domain host1x-pd [ 1.459727] isp 54600000.isp: initialized [ 1.460683] isp 54680000.isp: initialized [ 1.465753] tegradc tegradc.0: sync windows ret = 246 [ 1.471051] last reset is due to power on reset [ 1.471054] KERNEL: PMC reset status reg: 0x0 [ 1.471150] BL: PMC reset status reg: 0x0 [ 1.471151] BL: PMIC poweroff Event Recorder: 0x40 [ 1.472601] clk_cbus_recalc_rate: no gbus parent [ 1.472605] clk_cbus_round_rate: no gbus parent [ 1.472607] clk_cbus_round_rate: no gbus parent [ 1.472613] clk_cbus_recalc_rate: no gbus parent [ 1.472712] clk_cbus_recalc_rate: no gbus parent [ 1.472714] clk_cbus_round_rate: no gbus parent [ 1.472716] clk_cbus_round_rate: no gbus parent [ 1.472719] clk_cbus_recalc_rate: no gbus parent [ 1.473412] tegra_dvfs: GPU-cap: registered [ 1.473467] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.473469] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.473470] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.474856] tegra_dvfs: vdd-gpu-vts: registered [ 1.476714] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.477313] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.477899] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.493216] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.503150] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.514088] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:12 UTC (946688412) [ 1.514144] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.514146] Extcon HDMI: HPD enabled [ 1.514161] tegradc tegradc.0: hdmi: plugged [ 1.515150] vi 54080000.vi: vi_probe: ++ [ 1.518027] vi 54080000.vi: initialized [ 1.520075] vi 54080000.vi: subdev nvcsi--2 bound [ 1.520175] vi 54080000.vi: subdev nvcsi--1 bound [ 1.521549] Disable partitions left on by BL [ 1.521552] disb [ 1.521609] bwmgr: missing cdev-type property [ 1.521707] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.521713] DRAM derating cdev registered. [ 1.522573] ALSA device list: [ 1.522576] #0: tegra-hda at 0x70038000 irq 83 [ 1.522578] #1: tegra-snd-t210ref-mobile-rt565x [ 1.525755] Freeing unused kernel memory: 8640K [ 1.546733] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.546738] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.546741] usb 1-2: Product: 4-Port USB 2.0 Hub [ 1.546744] usb 1-2: Manufacturer: Generic [ 1.549267] hub 1-2:1.0: USB hub found [ 1.550637] Root device found: mmcblk0p1 [ 1.551422] hub 1-2:1.0: 4 ports detected [ 1.647847] mmc0: hw tuning done ... [ 1.647892] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 1.648229] mmcblk0: mmc0:aaaa SN64G 59.5 GiB [ 1.653090] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.656079] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.693441] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.693446] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.693448] usb 2-1: Product: 2-Port USB 3.0 Hub [ 1.693451] usb 2-1: Manufacturer: Generic [ 1.698969] hub 2-1:1.0: USB hub found [ 1.700641] hub 2-1:1.0: 4 ports detected [ 1.755763] Found dev node: /dev/mmcblk0p1 [ 1.797090] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.798955] Rootfs mounted over mmcblk0p1 [ 1.828806] Switching from initrd to actual rootfs [ 1.855185] usb 1-2.1: new low-speed USB device number 3 using tegra-xusb [ 1.859115] usb 2-1: usb_suspend_both: status 0 [ 1.859268] usb usb2: usb_suspend_both: status 0 [ 1.881281] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c31c [ 1.881286] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.881289] usb 1-2.1: Product: USB Keyboard [ 1.881291] usb 1-2.1: Manufacturer: Logitech [ 1.887492] input: Logitech USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C31C.0001/input/input2 [ 1.899151] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.947571] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-70090000.xusb-2.1/input0 [ 1.955118] input: Logitech USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C31C.0002/input/input3 [ 2.015419] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-70090000.xusb-2.1/input1 [ 2.062270] systemd[1]: System time before build time, advancing clock. [ 2.084457] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.095122] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 2.097041] cgroup: cgroup2: unknown option "nsdelegate" [ 2.103173] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.117953] usb 1-2.2: New USB device found, idVendor=04b3, idProduct=310d [ 2.117957] usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.119828] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.120645] systemd[1]: Detected architecture arm64. [ 2.121011] input: HID 04b3:310d as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.0/0003:04B3:310D.0003/input/input4 [ 2.121365] hid-generic 0003:04B3:310D.0003: input,hidraw2: USB HID v1.11 Mouse [HID 04b3:310d] on usb-70090000.xusb-2.2/input0 [ 2.143080] systemd[1]: Set hostname to . [ 2.167749] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.167754] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.270322] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.270332] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.307164] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.309231] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.382814] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored [ 2.413603] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.413608] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.413612] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.413615] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.413619] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.413639] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.413708] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.413839] iommu: Adding device 0000:00:02.0 to group 38 [ 2.413905] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.414013] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.414036] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.414066] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.414086] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.414227] pci 0000:01:00.0: supports D1 D2 [ 2.414230] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.414376] iommu: Adding device 0000:01:00.0 to group 39 [ 2.423229] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.423254] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.423258] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.423263] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.423280] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.423295] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.423303] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.423307] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.423311] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.423566] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.423569] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.423574] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.423657] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.423832] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.423849] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.438241] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.438309] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ec:7c:e7 from device tree [ 2.438725] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.438739] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.449223] random: systemd: uninitialized urandom read (16 bytes read) [ 2.449470] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.449582] random: systemd: uninitialized urandom read (16 bytes read) [ 2.451074] systemd[1]: Created slice User and Session Slice. [ 2.451268] random: systemd: uninitialized urandom read (16 bytes read) [ 2.453069] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.453143] systemd[1]: Reached target Swap. [ 2.524654] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.665761] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.763444] systemd-journald[2062]: Received request to flush runtime journal from PID 1 [ 3.816786] random: crng init done [ 3.820217] random: 7 urandom warning(s) missed due to ratelimiting [ 4.821871] using random self ethernet address [ 4.833909] using random host ethernet address [ 4.994607] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.994629] cpu-throttle-alert cooling device registered. [ 4.994819] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.994834] gpu-throttle-alert cooling device registered. [ 4.995024] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.995037] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.995050] hot-surface-alert cooling device registered. [ 5.333298] FAT-fs (loop0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.121239] Mass Storage Function, version: 2009/09/11 [ 6.121246] LUN: removable file: (no medium) [ 6.126643] using random self ethernet address [ 6.136337] using random host ethernet address [ 6.347663] rndis0: HOST MAC 3a:8e:f1:57:91:54 [ 6.348592] rndis0: MAC 3a:8e:f1:57:91:55 [ 6.350157] usb0: HOST MAC 3a:8e:f1:57:91:56 [ 6.350193] usb0: MAC 3a:8e:f1:57:91:57 [ 6.350219] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 6.350854] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 6.350871] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.350917] tegra-xudc-new 700d0000.xudc: entering ELPG [ 6.351191] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 6.352319] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.354529] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 6.355133] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 6.355147] tegra-xudc-new 700d0000.xudc: entering ELPG [ 6.355376] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 6.363636] eth0: 0xffffff800d52d000, 00:04:4b:ec:7c:e7, IRQ 407 [ 6.426139] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.430878] l4tbr0: port 1(rndis0) entered blocking state [ 6.430884] l4tbr0: port 1(rndis0) entered disabled state [ 6.431053] device rndis0 entered promiscuous mode [ 6.451491] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.462850] l4tbr0: port 2(usb0) entered blocking state [ 6.462855] l4tbr0: port 2(usb0) entered disabled state [ 6.470714] device usb0 entered promiscuous mode [ 6.476891] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.569233] zram: Added device: zram0 [ 6.569651] zram: Added device: zram1 [ 6.570309] zram: Added device: zram2 [ 6.570822] zram: Added device: zram3 [ 6.625360] zram0: detected capacity change from 0 to 518537216 [ 6.764366] Adding 506380k swap on /dev/zram0. Priority:5 extents:1 across:506380k SS [ 6.769105] zram1: detected capacity change from 0 to 518537216 [ 6.830056] Adding 506380k swap on /dev/zram1. Priority:5 extents:1 across:506380k SS [ 6.833871] zram2: detected capacity change from 0 to 518537216 [ 6.846879] Adding 506380k swap on /dev/zram2. Priority:5 extents:1 across:506380k SS [ 6.869765] zram3: detected capacity change from 0 to 518537216 [ 6.888196] Adding 506380k swap on /dev/zram3. Priority:5 extents:1 across:506380k SS [ 8.353957] Bridge firewalling registered [ 8.396759] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.740186] Netfilter messages via NETLINK v0.30. [ 8.743312] ctnetlink v0.93: registering with nfnetlink. [ 8.833459] tegradc tegradc.0: unblank [ 8.833469] tegradc tegradc.1: blank - powerdown [ 8.939001] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 13.057388] fuse init (API version 7.26) [ 14.792112] snd_hda_codec_hdmi hdaudioC0D3: HDMI: audio coding type 0 not expected [ 14.792118] snd_hda_codec_hdmi hdaudioC0D3: HDMI: audio coding type 0 not expected [ 14.792122] snd_hda_codec_hdmi hdaudioC0D3: HDMI: audio coding type 0 not expected [ 15.821225] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.821236] Bluetooth: BNEP socket layer initialized [ 31.865580] vdd-fan: disabling [ 31.865622] vdd-usb-vbus: disabling [ 31.865653] vdd-usb-vbus2: disabling [ 31.865742] vddio-sdmmc3-ap: disabling [ 31.866632] avdd-io-edp-1v05: disabling [ 31.866667] vdd-usb-hub-en: disabling