Last login: Mon Mar 7 13:30:25 2022 ifx@ifxhost:~$ lspci 00:02.0 PCI bridge: NVIDIA Corporation Device 0faf (rev a1) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) ifx@ifxhost:~$ dmesg Booting Linux on physical CPU 0x0 Linux version 4.9.253-tegra (root@testpc-Latitude-E7440) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #1 SMP PREEMPT Fri Feb 25 15:54:12 IST 2022 Boot CPU: AArch64 Processor [411fd071] OF: fdt:memory scan node memory@80000000, reg size 32, OF: fdt: - 80000000 , 7ee00000 OF: fdt: - 100000000 , 7f200000 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') bootconsole [uart8250] enabled OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops cma: Reserved 64 MiB at 0x00000000fac00000 On node 0 totalpages: 1039872 DMA zone: 8192 pages used for memmap DMA zone: 0 pages reserved DMA zone: 519168 pages, LIFO batch:31 Normal zone: 8136 pages used for memmap Normal zone: 520704 pages, LIFO batch:31 psci: probing for conduit method from DT. psci: PSCIv1.0 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. psci: SMC Calling Convention v1.1 percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 CPU features: enabling workaround for ARM erratum 832075 Speculative Store Bypass Disable mitigation not required Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 log_buf_len individual max cpu contribution: 32768 bytes log_buf_len total cpu_extra contributions: 98304 bytes log_buf_len min size: 32768 bytes log_buf_len: 131072 bytes early log buf free: 29940(91%) PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3568080K/4159488K available (15358K kernel code, 2960K rwdata, 7060K rodata, 8640K init, 612K bss, 116272K reserved, 475136K cma-reserved) Virtual kernel memory layout: modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) .rodata : 0xffffff8008f80000 - 0xffffff8009670000 ( 7104 KB) .init : 0xffffff8009670000 - 0xffffff8009ee0000 ( 8640 KB) .data : 0xffffff8009ee0000 - 0xffffff800a1c4008 ( 2961 KB) .bss : 0xffffff800a1c4008 - 0xffffff800a25d0b4 ( 613 KB) fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 NR_IRQS:64 nr_irqs:64 0 /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller t210 clock and reset probe tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 clk_cbus_recalc_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [uart8250] disabled kmemleak: Kernel memory leak detector disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) ftrace: allocating 47150 entries in 185 pages sched-energy: CPU device node has no sched-energy-costs ASID allocator initialised with 65536 entries tegra-id: chipid=22117. tegra-id: opt_subrevision=0. Tegra Speedo/IDDQ fuse revision 4 Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 Tegra: CPU Speedo Value 2072, SoC Speedo Value 1970, GPU Speedo Value 2070 Tegra: CPU IDDQ Value 2012, SoC IDDQ Value 2124, GPU IDDQ Value 2695 Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 DTS File Name: /home/test-pc/Desktop/nano_tc6_feb25/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts DTB Build time: Feb 25 2022 15:25:24 CPU1: Booted secondary processor [411fd071] CPU2: Booted secondary processor [411fd071] CPU3: Booted secondary processor [411fd071] Brought up 4 CPUs SMP: Total of 4 processors activated. CPU features: detected feature: 32-bit EL0 Support CPU: All CPU(s) started at EL2 alternatives: patching kernel code devtmpfs: initialized Initilizing CustomIPI irq domain clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) pinctrl core: initialized pinctrl subsystem OS set in device tree is not L4T. regulator-dummy: no parameters Initializing plugin-manager Plugin module not found node /plugin-manager/fragement@0 match with board >=3448-0000-100 node /plugin-manager/fragment@1 match with board >=3448-0000-101 node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt node /plugin-manager/fragement@13 match with board >=3448-0000-300 NET: Registered protocol family 16 pstore: using zlib compression console [pstore-1] enabled pstore: Registered ramoops as persistent store backend ramoops: attached 0x200000@0xb0000000, ecc: 0/0 cpuidle: using governor menu tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ee4000) hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations Serial: AMBA PL011 UART driver tegra_powergate_init: DONE DTS File Name: /home/test-pc/Desktop/nano_tc6_feb25/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts DTB Build time: Feb 25 2022 15:25:24 Tegra reboot handler registered. iommu: Adding device tegra-carveouts to group 0 platform tegra-carveouts: domain=ffffffc0f943c3d8 allocates as[0]=ffffffc0f94240a8 iommu: Adding device smmu_test to group 1 platform smmu_test: domain=ffffffc0f943c618 allocates as[0]=ffffffc0f9424110 mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 nv-tegra-mc 70019000.mc: No mssnvlink node mc-err: mcerr ops are set to t21x iommu: Adding device 70090000.xusb to group 2 iommu: Adding device 70006000.serial to group 3 platform 70006000.serial: domain=ffffffc0f94bf558 allocates as[0]=ffffffc0f9424178 iommu: Adding device 70006040.serial to group 4 iommu: Adding device 70006200.serial to group 5 iommu: Adding device sound to group 6 platform sound: domain=ffffffc0f94bfa98 allocates as[0]=ffffffc0f94241e0 iommu: Adding device 7000d400.spi to group 7 iommu: Adding device 7000d600.spi to group 8 iommu: Adding device 70410000.spi to group 9 iommu: Adding device 50000000.host1x to group 10 iommu: Adding device 54080000.vi to group 11 iommu: Adding device 54600000.isp to group 12 iommu: Adding device 54680000.isp to group 13 iommu: Adding device tegradc.0 to group 14 platform tegradc.0: domain=ffffffc0f94ca9d8 allocates as[0]=ffffffc0f9424248 platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) iommu: Adding device tegradc.1 to group 15 platform tegradc.1: domain=ffffffc0f94cac18 allocates as[0]=ffffffc0f94242b0 platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) iommu: Adding device 54340000.vic to group 16 iommu: Adding device 544c0000.nvenc to group 17 iommu: Adding device 54500000.tsec to group 18 iommu: Adding device 54100000.tsecb to group 19 iommu: Adding device 54480000.nvdec to group 20 iommu: Adding device 54380000.nvjpg to group 21 iommu: Adding device 546c0000.i2c to group 22 iommu: Adding device 57000000.gpu to group 23 platform 57000000.gpu: domain=ffffffc0f94d6c18 allocates as[0]=ffffffc0f9424318 platform 57000000.gpu: domain=ffffffc0f94d6c18 allocates as[1]=ffffffc0f9424380 platform 57000000.gpu: domain=ffffffc0f94d6c18 allocates as[2]=ffffffc0f94243e8 platform 57000000.gpu: domain=ffffffc0f94d6c18 allocates as[3]=ffffffc0f9424450 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. tegra-pmc 7000e400.pmc: scratch reg offset dts data not present tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM tegra-pmc: ### PMC reset status reg: 0x3 padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered tegra-pmc: Clear bootloader IO dpd settings tegra-pmc 7000e400.pmc: IO padctrl driver initialized tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands iommu: Adding device 70012000.se to group 24 iommu: Adding device 7000c000.i2c to group 25 iommu: Adding device 7000c400.i2c to group 26 iommu: Adding device 7000c500.i2c to group 27 iommu: Adding device 7000c700.i2c to group 28 iommu: Adding device 7000d000.i2c to group 29 iommu: Adding device 7000d100.i2c to group 30 iommu: Adding device sdhci-tegra.0 to group 31 platform sdhci-tegra.0: domain=ffffffc0f955ee58 allocates as[0]=ffffffc0f94244b8 iommu: Adding device 700d0000.xudc to group 32 vdd-ac-bat: 5000 mV vdd-5v0-sys: 5000 mV vdd-5v0-hdmi: 5000 mV vdd-5v0-hdmi: supplied by vdd-5v0-sys vdd-1v8-sys: 1800 mV vdd-fan: 5000 mV vdd-fan: supplied by vdd-5v0-sys vdd-usb-vbus: 5000 mV vdd-usb-vbus: supplied by vdd-5v0-sys vdd-usb-vbus2: 5000 mV HugeTLB registered 2 MB page size, pre-allocated 0 pages gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip GPIO line 27 (uart3-rts) hogged as output/high GPIO line 66 (w-disable2) hogged as output/low GPIO line 6 (system-suspend-gpio) hogged as output/high GPIO line 151 (camera-control-output-low) hogged as output/low GPIO line 152 (camera-control-output-low) hogged as output/low gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) eventlib_kernel: keventlib is initialized, test id: 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 vdd-core: 600 <--> 1162 mV at 1075 mV vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV random: fast init done vdd-ddr-1v1: 1150 mV vdd-pre-reg-1v35: 1350 mV vdd-1v8: 1800 mV avdd-sys-1v2: 1200 mV vdd-pex-1v0: 1050 mV vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV max77620-ldo3: at 3100 mV vdd-rtc: 850 <--> 1100 mV at 1000 mV max77620-ldo5: at 3100 mV vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV avdd-1v05-pll: 1050 mV avdd-io-hdmi-dp: 1050 mV GPIO line 505 (spmic-default-output-high) hogged as output/high gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) max77620 4-003c: max77620 probe successful media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized tegra210_dvfs: no clock found for sdmmc2_ddr tegra210_dvfs: no clock found for sdmmc4_ddr tegra210_dvfs: no clock found for sdmmc1_ddr tegra210_dvfs: no clock found for sdmmc3_ddr tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe vdd-3v3-sys: 3300 mV vdd-3v3-sys: supplied by vdd-5v0-sys vdd-1v8-sys: supplied by vdd-3v3-sys vdd-usb-vbus2: supplied by vdd-3v3-sys vdd-3v3-sd: 3300 mV vdd-3v3-sd: supplied by vdd-3v3-sys avdd-io-edp-1v05: 1050 mV avdd-io-edp-1v05: supplied by avdd-1v05-pll vdd-usb-hub-en: 5000 mV vdd-usb-hub-en: supplied by vdd-1v8-sys camchar: rtcpu character device driver loaded extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) nvmap_heap_init: nvmap_heap_init: created heap block cache dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) cma: enabled page replacement for spfn=d7000, epfn=f0000 dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways nvmap_page_pool_init: Total RAM pages: 1010804 nvmap_page_pool_init: nvmap page pool size: 126350 pages (493 MB) nvmap_background_zero_thread: PP zeroing thread starting. misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz pre_t19x_iso_plat_init(): max_iso_bw=11520000KB NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6992K host1x 50000000.host1x: initialized hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.831:1): initialized workingset: timestamp_bits=46 max_order=20 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher ntfs: driver 2.1.32 [Flags: R/W]. 9p: Installing v9fs 9p2000 file system support Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) io scheduler noop registered io scheduler cfq registered (default) gic 702f9000.agic: GIC IRQ controller registered iommu: Adding device 702ef000.adsp to group 33 iommu: Adding device aconnect@702c0000:adsp_audio to group 34 tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7a07c0e tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 tegra-pcie 1003000.pcie: 4x1, 1x1 configuration tegra-pcie 1003000.pcie: PCIE: Enable power rails tegra-pcie 1003000.pcie: probing port 0, using 4 lanes tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 Adding domain tsec-pd to PM domain host1x-pd tegra-pcie 1003000.pcie: probing port 1, using 1 lanes tsec 54500000.tsec: initialized tsec 54100000.tsecb: initialized Adding domain nvdec-pd to PM domain host1x-pd nvdec 54480000.nvdec: initialized Adding domain vic03-pd to PM domain host1x-pd Adding domain msenc-pd to PM domain host1x-pd Adding domain nvjpg-pd to PM domain host1x-pd falcon 54340000.vic: initialized falcon 544c0000.nvenc: initialized falcon 54380000.nvjpg: initialized tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 tegra_cec 70015000.tegra_cec: Enable clock result: 0. tegra_cec 70015000.tegra_cec: tegra_cec_init started tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 display board info: id 0x0, fab 0x0 generic_infoframe_type: 0x87 tegradc tegradc.0: DT parsed successfully tegradc tegradc.0: Display dc.ffffff800ac00000 registered with id=0 tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 tegra_cec 70015000.tegra_cec: probed tegradc tegradc.0: probed Console: switching to colour frame buffer device 80x30 tegradc tegradc.0: fb registered tegradc tegradc.1: disp1 connected to head1->/host1x/sor tegradc tegradc.1: No lt-data, using default setting tegradc tegradc.1: No hpd-gpio in DT tegradc tegradc.1: DT parsed successfully tegradc tegradc.1: Display dc.ffffff800ad80000 registered with id=1 tegradc tegradc.1: dpd enable lookup fail:-19 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels Host read timeout at address 545c00c4 tegradc tegradc.1: probed tegradc tegradc.1: fb registered tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized kfuse 7000fc00.kfuse: initialized hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 tegradc tegradc.1: blank - powerdown extcon-disp-state extcon:disp-state: cable 44 state 0 already set. Extcon DP: HPD disabled hpd: hpd_switch 0 hpd: switching from state 0 (Reset) to state 1 (Check Plug) hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 hpd: switching from state 1 (Check Plug) to state 3 (Disabled) tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now vdd-cpu: 708 <--> 1322 mV at 708 mV pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed vdd-gpu: applied init 1000000uV constraint vdd-gpu: 708 <--> 1323 mV at 997 mV pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled No Device Node present for smmu client: serial8250 !! platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) iommu: Adding device serial8250 to group 35 console [ttyS0] disabled 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra console [ttyS0] enabled 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART serial-tegra 70006200.serial: RX in PIO mode 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [drm] Initialized brd: module loaded loop: module loaded tegra_profiler: version: 1.145, samples/io: 49/28 tegra_profiler: auth: init THERMAL EST: found 2 subdevs THERMAL EST num_resources: 0 [THERMAL EST subdev 0] [THERMAL EST subdev 1] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est THERMAL EST: thz register success. THERMAL EST: end of probe, return err: 0 sd: No Scsi addr parsed to reserve index hisi_sas: driver version v1.6 tegra-qspi 70410000.spi: Prod settings list not found qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k igbvf: Copyright (c) 2009 - 2012 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k ixgbe: Copyright (c) 1999-2016 Intel Corporation. PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 usbcore: registered new interface driver r8152 usbcore: registered new interface driver asix usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_ncm VFIO - User Level meta-driver version: 0.3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9044800 id usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release tegra-xusb 70090000.xusb: xHCI Host Controller tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd usb usb1: SerialNumber: 70090000.xusb hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected tegra-xusb 70090000.xusb: xHCI Host Controller tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd usb usb2: SerialNumber: 70090000.xusb hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected tegra-xudc-new 700d0000.xudc: device count: 1 tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 tegra-xudc-new 700d0000.xudc: USB charger detection disabled tegra-xudc-new 700d0000.xudc: vbus state: 0 tegra-xudc-new 700d0000.xudc: entering ELPG tegra-xudc-new 700d0000.xudc: entering ELPG done mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver xpad tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 usb usb2: usb_suspend_both: status 0 max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 rtc rtc1: alarm rtc device tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock i2c /dev entries driver i2c i2c-6: Added multiplexed i2c bus 7 i2c i2c-6: Added multiplexed i2c bus 8 i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) imx219 7-0010: board setup failed imx219: probe of 7-0010 failed with error -121 imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) imx219 8-0010: board setup failed imx219: probe of 8-0010 failed with error -121 max77620-power max77620-power: Event recorder REG_NVERC : 0x0 tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 tegra_aotag tegra-aotag: Registering sensor 0 tegra_aotag tegra-aotag: Invalid temp readout tegra_aotag tegra-aotag: Invalid temp readout tegra_aotag tegra-aotag: Bound to TZ : ID 0 tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered tegra_aotag tegra-aotag: Invalid temp readout tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered parse_throttle_dt_data: Num cap clks = 6 parse_throttle_dt_data: clk=cclk_g type=2 parse_throttle_dt_data: clk=gpu type=4 parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 parse_throttle_dt_data: clk=cap.throttle.sclk type=0 parse_throttle_dt_data: clk=emc type=3 tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_throttle_probe: probe successful. #cdevs=4 FAN dev name: pwm-fan FAN:gpio request success. pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal pwm_fan_driver pwm-fan: fan tach request irq success pwm_fan_driver pwm-fan: tach period: 1000 pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com tegra210-cpufreq cpufreq: probe()...completed sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-tegra sdhci-tegra.0: Got CD GPIO sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 tegra-se 70012000.se: tegra_se_probe: complete hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver tegra21x_actmon 6000c800.actmon: in actmon_register()... tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all nvpmodel: initialized successfully usbcore: registered new interface driver snd-usb-audio No Device Node present for smmu client: snd-soc-dummy !! platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) iommu: Adding device snd-soc-dummy to group 36 input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 OPE platform probe OPE platform probe successful OPE platform probe OPE platform probe successful tegra-pcie 1003000.pcie: link 0 down, retrying mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok u32 classifier Actions configured Initializing XFRM netlink socket NET: Registered protocol family 10 NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized 9pnet: Installing 9P2000 support Key type dns_resolver registered Registered cp15_barrier emulation handler Registered setend emulation handler registered taskstats version 1 Adding domain ve2-pd to PM domain host1x-pd Adding domain ve-pd to PM domain host1x-pd isp 54600000.isp: initialized isp 54680000.isp: initialized last reset is due to software reset KERNEL: PMC reset status reg: 0x3 BL: PMC reset status reg: 0x3 BL: PMIC poweroff Event Recorder: 0x0 clk_cbus_recalc_rate: no gbus parent clk_cbus_round_rate: no gbus parent clk_cbus_round_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent clk_cbus_round_rate: no gbus parent clk_cbus_round_rate: no gbus parent clk_cbus_recalc_rate: no gbus parent tegra_dvfs: GPU-cap: registered tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled tegra_dvfs: vdd-gpu-vts: registered usb 1-2: new high-speed USB device number 2 using tegra-xusb tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered input: gpio-keys as /devices/gpio-keys/input/input1 usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: 4-Port USB 2.1 Hub usb 1-2: Manufacturer: Generic hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected tegra_rtc 7000e000.rtc: setting system clock to 2022-03-07 13:30:16 UTC (1646659816) vi 54080000.vi: vi_probe: ++ vi 54080000.vi: initialized vi 54080000.vi: subdev nvcsi--2 bound vi 54080000.vi: subdev nvcsi--1 bound Disable partitions left on by BL disb bwmgr: missing cdev-type property tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 DRAM derating cdev registered. ALSA device list: #0: tegra-hda at 0x70038000 irq 83 #1: tegra-snd-t210ref-mobile-rt565x Freeing unused kernel memory: 8640K tegra_cec 70015000.tegra_cec: Can't find physical addresse. tegra_cec 70015000.tegra_cec: tegra_cec_init Done. Root device found: mmcblk0p1 usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb mmc0: hw tuning done ... mmc0: new ultra high speed SDR104 SDXC card at address 59b4 mmcblk0: mmc0:59b4 LX64G 58.9 GiB tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: 4-Port USB 3.1 Hub usb 2-1: Manufacturer: Generic hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 1-2: usb_suspend_both: status 0 usb usb1: usb_suspend_both: status 0 Found dev node: /dev/mmcblk0p1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) Rootfs mounted over mmcblk0p1 usb 2-1: usb_suspend_both: status 0 usb usb2: usb_suspend_both: status 0 Switching from initrd to actual rootfs tegra-pcie 1003000.pcie: link 0 down, retrying ip_tables: (C) 2000-2006 Netfilter Core Team cgroup: cgroup2: unknown option "nsdelegate" systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture arm64. systemd[1]: Set hostname to . systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) tegra-pcie 1003000.pcie: link 0 down, retrying tegra-pcie 1003000.pcie: link 0 down, ignoring random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Created slice System Slice. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Started Forward Password Requests to Wall Directory Watch. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on Journal Audit Socket. systemd[1]: Listening on Syslog Socket. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded aer 0000:00:02.0:pcie002: service driver aer loaded r8168 0000:01:00.0: enabling device (0000 -> 0003) r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:3c:c2:1a from device tree r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . compat: loading out-of-tree module taints kernel. compat: no symbol version for hash_algo_name Loading modules backported from Linux version v5.10.9-drogon-6-0-ga0971bc0b123 Backport generated by backports.git v5.10.42-1-0-gbee5c545 systemd-journald[2020]: Received request to flush runtime journal from PID 1 cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: loaded regulatory.db is malformed or signature is missing/invalid tegra-xusb 70090000.xusb: entering ELPG tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 tegra-xusb 70090000.xusb: entering ELPG done random: crng init done random: 7 urandom warning(s) missed due to ratelimiting tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 cpu-throttle-alert cooling device registered. tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 gpu-throttle-alert cooling device registered. tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 hot-surface-alert cooling device registered. nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) using random self ethernet address using random host ethernet address Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) using random self ethernet address using random host ethernet address rndis0: HOST MAC 1a:9b:aa:16:64:b0 rndis0: MAC 1a:9b:aa:16:64:b1 usb0: HOST MAC 1a:9b:aa:16:64:b2 usb0: MAC 1a:9b:aa:16:64:b3 tegra-xudc-new 700d0000.xudc: exiting ELPG tegra-xudc-new 700d0000.xudc: exiting ELPG done tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled tegra-xudc-new 700d0000.xudc: entering ELPG tegra-xudc-new 700d0000.xudc: entering ELPG done tegra-xudc-new 700d0000.xudc: exiting ELPG tegra-xudc-new 700d0000.xudc: exiting ELPG done tegra-xudc-new 700d0000.xudc: entering ELPG tegra-xudc-new 700d0000.xudc: entering ELPG done l4tbr0: port 1(rndis0) entered blocking state l4tbr0: port 1(rndis0) entered disabled state device rndis0 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready l4tbr0: port 2(usb0) entered blocking state l4tbr0: port 2(usb0) entered disabled state device usb0 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: 0xffffff800abd7000, 48:b0:2d:3c:c2:1a, IRQ 407 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Bridge firewalling registered nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Netfilter messages via NETLINK v0.30. ctnetlink v0.93: registering with nfnetlink. zram: Added device: zram0 zram: Added device: zram1 zram: Added device: zram2 zram: Added device: zram3 IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready zram0: detected capacity change from 0 to 519532544 Adding 507352k swap on /dev/zram0. Priority:5 extents:1 across:507352k SS zram1: detected capacity change from 0 to 519532544 Adding 507352k swap on /dev/zram1. Priority:5 extents:1 across:507352k SS zram2: detected capacity change from 0 to 519532544 Adding 507352k swap on /dev/zram2. Priority:5 extents:1 across:507352k SS zram3: detected capacity change from 0 to 519532544 Adding 507352k swap on /dev/zram3. Priority:5 extents:1 across:507352k SS r8168: eth0: link up IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready tegradc tegradc.0: blank - powerdown tegradc tegradc.1: blank - powerdown fuse init (API version 7.26) Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP socket layer initialized ifx@ifxhost:~$ Network error: Software caused connection abort