[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2988) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:30:11 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607b000 [ 0.000000] Found lut_mem2: 00002008@96078000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1f6776000 s53400 r8192 d32616 u94208 [ 0.000000] pcpu-alloc: s53400 r8192 d32616 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607b000 lut_mem2=0x2008@0x96078000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29492(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7966544K/8212468K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 180388K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB) [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009971] Console: colour dummy device 80x25 [ 0.014633] console [tty0] enabled [ 0.018189] bootconsole [uart8250] disabled [ 0.022563] kmemleak: Kernel memory leak detector disabled [ 0.022579] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022592] pid_max: default: 32768 minimum: 301 [ 0.022904] Security Framework initialized [ 0.023063] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023075] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023690] ftrace: allocating 46802 entries in 183 pages [ 0.146439] sched-energy: Sched-energy-costs installed from DT [ 0.146458] ASID allocator initialised with 65536 entries [ 0.184050] tegra-id: chipid=21817. [ 0.184065] tegra-id: opt_subrevision=1. [ 0.184086] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.184100] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.184117] DTB Build time: Mar 13 2019 00:34:41 [ 0.229903] CPU1: Booted secondary processor [4e0f0030] [ 0.261564] CPU2: Booted secondary processor [4e0f0030] [ 0.293403] CPU3: Booted secondary processor [411fd073] [ 0.325400] CPU4: Booted secondary processor [411fd073] [ 0.357394] CPU5: Booted secondary processor [411fd073] [ 0.357447] Brought up 6 CPUs [ 0.357489] SMP: Total of 6 processors activated. [ 0.357500] CPU features: detected feature: 32-bit EL0 Support [ 0.358277] CPU: All CPU(s) started at EL2 [ 0.358329] alternatives: patching kernel code [ 0.367516] devtmpfs: initialized [ 0.404059] Initilizing CustomIPI irq domain [ 0.404268] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.404293] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.405128] pinctrl core: initialized pinctrl subsystem [ 0.405342] OS set in device tree is not L4T. [ 0.405511] regulator-dummy: no parameters [ 0.405651] Initializing plugin-manager [ 0.405715] Plugin module not found [ 0.405759] Plugin-manager status disabled [ 0.407565] NET: Registered protocol family 16 [ 0.408275] pstore: using zlib compression [ 0.408653] console [pstore-1] enabled [ 0.408665] pstore: Registered ramoops as persistent store backend [ 0.408677] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.425036] cpuidle: using governor menu [ 0.426485] bpmp: waiting for handshake [ 0.426503] bpmp: handshake completed [ 0.426525] bpmp: synchronizing channels [ 0.426543] bpmp: channels synchronized [ 0.426555] bpmp: mail init ok [ 0.428592] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.428611] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.428624] arm-smmu 12000000.iommu: stage 1 translation [ 0.428636] arm-smmu 12000000.iommu: stage 2 translation [ 0.428648] arm-smmu 12000000.iommu: nested translation [ 0.428662] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.428682] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.428700] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.428714] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.428727] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.430863] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000) [ 0.430893] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.433221] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.435083] Registering BPMP clocks... [ 0.435189] tegra_bpmp_clk_init: clock init ok (636 clks) [ 0.435900] tegra_bpmp_of_clk_init: EMC proxy not found. [ 0.437385] tegra_powergate_init: DONE [ 0.437405] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.437433] DTB Build time: Mar 13 2019 00:34:41 [ 0.439394] Tegra reboot handler registered. [ 0.440901] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.440981] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.441004] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.441046] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.441058] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.441224] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.441251] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.441588] iommu: Adding device 3460000.sdhci to group 0 [ 0.442280] iommu: Adding device 3400000.sdhci to group 1 [ 0.443356] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.443382] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.443835] iommu: Adding device 3160000.i2c to group 3 [ 0.444273] iommu: Adding device c240000.i2c to group 4 [ 0.444629] iommu: Adding device 3180000.i2c to group 5 [ 0.444973] iommu: Adding device 3190000.i2c to group 6 [ 0.445452] iommu: Adding device 31b0000.i2c to group 7 [ 0.445798] iommu: Adding device 31c0000.i2c to group 8 [ 0.446137] iommu: Adding device c250000.i2c to group 9 [ 0.446485] iommu: Adding device 31e0000.i2c to group 10 [ 0.447991] iommu: Adding device 3210000.spi to group 11 [ 0.448342] iommu: Adding device c260000.spi to group 12 [ 0.448685] iommu: Adding device 3240000.spi to group 13 [ 0.449408] iommu: Adding device 3100000.serial to group 14 [ 0.449768] iommu: Adding device 3110000.serial to group 15 [ 0.450109] iommu: Adding device c280000.serial to group 16 [ 0.450448] iommu: Adding device 3130000.serial to group 17 [ 0.451792] iommu: Adding device 2490000.ether_qos to group 18 [ 0.451815] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.452415] iommu: Adding device b000000.rtcpu to group 19 [ 0.454666] iommu: Adding device 13e10000.host1x to group 20 [ 0.454983] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.455294] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.455617] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.455922] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.456234] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.456540] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.456871] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.457225] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.457694] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.458356] iommu: Adding device 15700000.vi to group 30 [ 0.458719] iommu: Adding device 15600000.isp to group 31 [ 0.459185] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.459303] platform 15210000.nvdisplay: OF IOVA linear map 0x9607b000 size (0x800000) [ 0.459352] platform 15210000.nvdisplay: OF IOVA linear map 0x96078000 size (0x2008) [ 0.459870] iommu: Adding device 15340000.vic to group 33 [ 0.460098] iommu: Adding device 154c0000.nvenc to group 34 [ 0.460324] iommu: Adding device 15480000.nvdec to group 35 [ 0.460675] iommu: Adding device 15380000.nvjpg to group 36 [ 0.460916] iommu: Adding device 15500000.tsec to group 37 [ 0.461164] iommu: Adding device 15100000.tsecb to group 38 [ 0.461845] iommu: Adding device 15810000.se to group 39 [ 0.462078] iommu: Adding device 15820000.se to group 40 [ 0.462304] iommu: Adding device 15830000.se to group 41 [ 0.462534] iommu: Adding device 15840000.se to group 42 [ 0.463416] iommu: Adding device smmu_test to group 43 [ 0.464030] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c10000 [ 0.464055] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c20000 [ 0.464075] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c30000 [ 0.464096] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c40000 [ 0.464116] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c50000 [ 0.464134] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.464155] mc-err: mcerr ops are set to t18x [ 0.464391] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.465508] iommu: Adding device 3530000.xhci to group 44 [ 0.465532] arm-smmu: forcing sodev map for 3530000.xhci [ 0.465976] iommu: Adding device 3550000.xudc to group 45 [ 0.465999] arm-smmu: forcing sodev map for 3550000.xudc [ 0.466723] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.466743] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.467312] iommu: Adding device 17000000.gp10b to group 46 [ 0.468346] tegra-reset 5000000.clock: registered 193 resets. [ 0.470575] iommu: Adding device d000000.bpmp to group 47 [ 0.470795] bpmp: ping status is 0 [ 0.470896] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c [ 0.473333] bpmp d000000.bpmp: probe ok [ 0.476451] iommu: Adding device 2600000.dma to group 48 [ 0.477734] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.477772] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.477805] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.477837] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.477871] GPIO line 424 (wifi-enable) hogged as output/high [ 0.477901] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.477933] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.478141] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.481847] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.482030] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.483613] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.483639] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.483973] iommu: Adding device sound to group 50 [ 0.484340] iommu: Adding device 3510000.hda to group 51 [ 0.491932] iommu: Adding device c1a0000.aon to group 52 [ 0.492381] vdd-ac-bat: 5000 mV [ 0.494113] vdd-1v8-ap: 1800 mV [ 0.517591] random: fast init done [ 0.534603] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540910] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.541448] SCSI subsystem initialized [ 0.541751] libata version 3.00 loaded. [ 0.541950] usbcore: registered new interface driver usbfs [ 0.542028] usbcore: registered new interface driver hub [ 0.542168] usbcore: registered new device driver usb [ 0.546001] GPIO line 241 (touch-rails) hogged as output/high [ 0.546323] GPIO line 242 (touch-rails) hogged as output/high [ 0.546698] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.547907] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.548261] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.561259] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.565761] vddio-ddr: at 1125 mV [ 0.569595] avdd_dsi_csi: 1200 mV [ 0.573605] vdd-1v8: 1800 mV [ 0.577596] vdd-3v3-sys: 3300 mV [ 0.579029] spmic-ldo0: at 1800 mV [ 0.580103] spmic-ldo1: at 800 mV [ 0.585594] vddio-3v3: 3300 mV [ 0.586386] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.589602] vdd-rtc: at 800 mV [ 0.590534] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.593599] spmic-ldo6: at 1500 mV [ 0.597596] vdd-pex-1v00: 1000 mV [ 0.598455] dvdd-pex: 1000 mV [ 0.599119] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.599351] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.599704] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.602216] max77620 4-003c: max77620 probe successful [ 0.602753] media: Linux media interface: v0.10 [ 0.602914] Linux video capture interface: v2.00 [ 0.606261] pps_core: LinuxPPS API ver. 1 registered [ 0.606300] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.606361] PTP clock support registered [ 0.607058] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.607127] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.611156] tegra_fiq_debugger_init: found FIQ source (IRQ 386) [ 0.615736] Advanced Linux Sound Architecture Driver Initialized. [ 0.616455] Bluetooth: Core ver 2.22 [ 0.616581] NET: Registered protocol family 31 [ 0.616612] Bluetooth: HCI device and connection manager initialized [ 0.616650] Bluetooth: HCI socket layer initialized [ 0.616682] Bluetooth: L2CAP socket layer initialized [ 0.616729] Bluetooth: SCO socket layer initialized [ 0.617852] en-vdd-sd: 3300 mV [ 0.618524] en-vdd-cam: 1800 mV [ 0.621600] vdd-hdmi: 5000 mV [ 0.622101] vdd-usb0-5v: 5000 mV [ 0.622556] vdd-usb1-5v: 5000 mV [ 0.625600] en-vdd-ts-1v8: 1800 mV [ 0.629597] en-vdd-ts-hv-3v3: 3300 mV [ 0.630216] en-vdd-disp-3v3: 3300 mV [ 0.630812] en-mdm-pwr-3v7: 3700 mV [ 0.631418] en-vdd-disp-1v8: 1800 mV [ 0.632048] en-vdd-cam-hv-2v8: 2800 mV [ 0.632674] en-vdd-cam-1v2: 1200 mV [ 0.633272] vdd-fan: 5000 mV [ 0.633615] vdd-3v3: 3300 mV [ 0.634353] dis-vdd-1v2: 1200 mV [ 0.634694] en-vdd-vcm-2v8: 2800 mV [ 0.635307] vdd-usb2-5v: 5000 mV [ 0.635643] vdd-sys-bl: 3300 mV [ 0.636253] en-vdd-sys: 1200 mV [ 0.639446] camchar: rtcpu character device driver loaded [ 0.640409] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.642446] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.644037] clocksource: Switched to clocksource arch_sys_counter [ 0.685344] VFS: Disk quotas dquot_6.6.0 [ 0.685588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.686231] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.687209] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.687253] nvmap_page_pool_init: Total RAM pages: 2008020 [ 0.687287] nvmap_page_pool_init: nvmap page pool size: 251002 pages (980 MB) [ 0.687534] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.691570] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.703839] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.704167] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.704626] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.704767] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.704943] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.705143] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.705471] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.705753] la/ptsa driver initialized. [ 0.705788] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.705821] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.706997] NET: Registered protocol family 2 [ 0.709037] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.709801] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.710685] TCP: Hash tables configured (established 65536 bind 65536) [ 0.710770] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.710925] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.711795] NET: Registered protocol family 1 [ 0.713014] RPC: Registered named UNIX socket transport module. [ 0.713053] RPC: Registered udp transport module. [ 0.713082] RPC: Registered tcp transport module. [ 0.713110] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.713147] PCI: CLS 0 bytes, default 64 [ 0.713417] Trying to unpack rootfs image as initramfs... [ 0.736157] host1x 13e10000.host1x: initialized [ 0.738226] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.743054] audit: initializing netlink subsys (disabled) [ 0.743139] audit: type=2000 audit(0.624:1): initialized [ 0.743801] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.755774] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.758471] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.760127] 9p: Installing v9fs 9p2000 file system support [ 0.766192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.770424] io scheduler noop registered [ 0.771092] io scheduler cfq registered (default) [ 0.776161] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.838471] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 0.877908] iommu: Adding device 2993000.adsp to group 54 [ 0.879149] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.882035] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.886278] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.887896] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.889425] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.890848] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.894046] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.895202] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.895652] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.896198] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.896392] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.896444] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 0.899526] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.900852] tsec 15500000.tsec: initialized [ 0.901917] tsec 15100000.tsecb: initialized [ 0.905300] nvdec 15480000.nvdec: initialized [ 0.911346] falcon 15340000.vic: initialized [ 0.912774] falcon 154c0000.nvenc: initialized [ 0.914550] falcon 15380000.nvjpg: initialized [ 0.918644] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.920410] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.922173] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.923902] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.925588] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.927207] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.928873] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.930423] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.935138] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.935186] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.935270] tegradccommon 15200000.dc_common: dma mapping done [ 0.937177] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.937336] generic_infoframe_type: 0x87 [ 0.937621] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.937717] tegradc 15210000.nvdisplay: Display dc.ffffff800b610000 registered with id=0 [ 0.947009] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 10 channels [ 0.948119] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.948167] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.948207] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.948262] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.948454] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.948478] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.948801] kfuse 3830000.kfuse: initialized [ 0.949764] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.951603] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.952452] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.952477] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.955123] tegradc 15210000.nvdisplay: probed [ 0.957490] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.960830] console [ttyS0] disabled [ 0.960951] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.330043] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.738000] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.145857] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.147888] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.554112] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.961635] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.285779] console [ttyS0] enabled [ 3.286563] Console: switching to colour frame buffer device 240x67 [ 3.292198] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.293403] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.293677] serial-tegra 3130000.serial: RX in PIO mode [ 3.294672] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.295783] [drm] Initialized [ 3.326226] brd: module loaded [ 3.334407] tegradc 15210000.nvdisplay: fb registered [ 3.339856] gpio tegra-gpio wake21 for gpio=121(P:1) [ 3.345587] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.349959] loop: module loaded [ 3.350034] tegra_profiler: version: 1.132, samples/io: 46/26 [ 3.350171] tegra_profiler: auth: init [ 3.350515] nct1008_nct72 7-004c: starting parse dt [ 3.350614] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.350620] nct1008_nct72 7-004c: success parsing dt [ 3.350716] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.351005] THERMAL EST: found 3 subdevs [ 3.351009] THERMAL EST num_resources: 0 [ 3.351018] [THERMAL EST subdev 0] [ 3.351023] [THERMAL EST subdev 1] [ 3.351026] [THERMAL EST subdev 2] [ 3.351326] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.351328] THERMAL EST: thz register success. [ 3.351601] THERMAL EST: end of probe, return err: 0 [ 3.352965] hisi_sas: driver version v1.6 [ 3.357291] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.357303] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.362646] scsi host0: tegra_ahci [ 3.363597] scsi host1: tegra_ahci [ 3.363759] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.363765] ata2: DUMMY [ 3.371665] libphy: Fixed MDIO Bus: probed [ 3.374411] tun: Universal TUN/TAP device driver, 1.6 [ 3.374414] tun: (C) 1999-2004 Max Krasnyansky [ 3.375358] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.375360] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.375448] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.375450] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.375533] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.375536] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.375625] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.375627] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.377093] eqos 2490000.ether_qos: no PHY interrupt found [ 3.377285] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.381072] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b a7 c4 c4 [ 3.381257] libphy: dwc_phy: probed [ 3.381689] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.382987] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.383487] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.384708] PPP generic driver version 2.4.2 [ 3.384979] PPP BSD Compression module registered [ 3.384982] PPP Deflate Compression module registered [ 3.384999] PPP MPPE Compression module registered [ 3.385003] NET: Registered protocol family 24 [ 3.385098] usbcore: registered new interface driver r8152 [ 3.385180] usbcore: registered new interface driver asix [ 3.385260] usbcore: registered new interface driver ax88179_178a [ 3.385340] usbcore: registered new interface driver cdc_ether [ 3.385417] usbcore: registered new interface driver net1080 [ 3.385493] usbcore: registered new interface driver cdc_subset [ 3.385568] usbcore: registered new interface driver zaurus [ 3.385660] usbcore: registered new interface driver cdc_ncm [ 3.386252] VFIO - User Level meta-driver version: 0.3 [ 3.388219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.388243] ehci-pci: EHCI PCI platform driver [ 3.388333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.388340] ohci-pci: OHCI PCI platform driver [ 3.388422] ohci-platform: OHCI generic platform driver [ 3.394762] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.396705] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eae06c00 id [ 3.396832] tegra-xusb 3530000.xhci: Direct firmware load for tegra18x_xusb_firmware failed with error -2 [ 3.396836] tegra-xusb 3530000.xhci: Falling back to user helper [ 3.397435] usbcore: registered new interface driver uas [ 3.397528] usbcore: registered new interface driver usb-storage [ 3.397739] usbcore: registered new interface driver usbserial [ 3.403325] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.404063] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.404604] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 3.404627] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.405962] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.406098] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.406108] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.406396] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.406785] mousedev: PS/2 mouse device common for all mice [ 3.406849] usbcore: registered new interface driver xpad [ 3.416195] nct1008_nct72 7-004c: initial LOC temp: 34000 [ 3.416501] nct1008_nct72 7-004c: initial EXT temp: 47500 [ 3.417105] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.417395] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.417581] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.538246] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.539549] Wake73 for irq=42 [ 3.541357] rtc rtc1: alarm rtc device [ 3.541372] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.541394] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.541558] i2c /dev entries driver [ 3.543702] pca954x 2-0070: pca954x_probe: forcing device bus number, start 30. [ 3.543707] pca954x 2-0070: device detect skipped. [ 3.544894] i2c i2c-2: Added multiplexed i2c bus 30 [ 3.545167] i2c i2c-2: Added multiplexed i2c bus 31 [ 3.545424] i2c i2c-2: Added multiplexed i2c bus 32 [ 3.545687] i2c i2c-2: Added multiplexed i2c bus 33 [ 3.545694] pca954x 2-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 3.547717] max9295 30-0062: [MAX9295]: probing GMSL IO Expander [ 3.547771] max9295 30-0062: max9295_probe: success [ 3.547795] max9295 30-0040: [MAX9295]: probing GMSL IO Expander [ 3.547831] max9295 30-0040: max9295_probe: success [ 3.547851] max9295 30-0060: [MAX9295]: probing GMSL IO Expander [ 3.547895] max9295 30-0060: max9295_probe: success [ 3.548056] max9296 30-0048: [MAX9296]: probing GMSL IO expander [ 3.548269] max9296 30-0048: max9296_probe: success [ 3.548413] imx390 30-001b: probing v4l2 sensor. [ 3.580285] tegra-i2c 3180000.i2c: no acknowledge from address 0x48 [ 3.580453] max9296 30-0048: max9296_write_reg:i2c write failed, 0x10 = 1 [ 3.580792] tegra-i2c 3180000.i2c: no acknowledge from address 0x48 [ 3.580953] max9296 30-0048: max9296_write_reg:i2c write failed, 0x10 = 21 [ 3.678960] ata1: SATA link down (SStatus 0 SControl 300) [ 3.688300] tegra-i2c 3180000.i2c: no acknowledge from address 0x62 [ 3.688467] max9295 30-0062: max9295_write_reg:i2c write failed, 0x0 = 80 [ 3.688815] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.688975] max9295 30-0040: max9295_write_reg:i2c write failed, 0x10 = 21 [ 3.748276] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.748438] max9295 30-0040: max9295_write_reg:i2c write failed, 0x6b = 10 [ 3.748804] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.748962] max9295 30-0040: max9295_write_reg:i2c write failed, 0x73 = 11 [ 3.749299] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.749457] max9295 30-0040: max9295_write_reg:i2c write failed, 0x7b = 30 [ 3.749794] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.749952] max9295 30-0040: max9295_write_reg:i2c write failed, 0x83 = 30 [ 3.750288] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.750446] max9295 30-0040: max9295_write_reg:i2c write failed, 0x93 = 30 [ 3.750804] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.750964] max9295 30-0040: max9295_write_reg:i2c write failed, 0x9b = 30 [ 3.751318] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.751480] max9295 30-0040: max9295_write_reg:i2c write failed, 0xa3 = 30 [ 3.751837] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.751999] max9295 30-0040: max9295_write_reg:i2c write failed, 0xab = 30 [ 3.752383] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.752560] max9295 30-0040: max9295_write_reg:i2c write failed, 0x8b = 30 [ 3.752917] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.753076] max9295 30-0040: max9295_write_reg:i2c write failed, 0x44 = 36 [ 3.753431] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.753597] max9295 30-0040: max9295_write_reg:i2c write failed, 0x45 = 34 [ 3.753961] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.754125] max9295 30-0040: max9295_write_reg:i2c write failed, 0x2be = 90 [ 3.754493] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.754652] max9295 30-0040: max9295_write_reg:i2c write failed, 0x2bf = 60 [ 3.755002] tegra-i2c 3180000.i2c: no acknowledge from address 0x40 [ 3.755164] max9295 30-0040: max9295_write_reg:i2c write failed, 0x3f1 = 89 [ 3.755522] tegra-i2c 3180000.i2c: no acknowledge from address 0x48 [ 3.755684] max9296 30-0048: max9296_write_reg:i2c write failed, 0x10 = 3 [ 3.756044] tegra-i2c 3180000.i2c: no acknowledge from address 0x48 [ 3.756235] max9296 30-0048: max9296_write_reg:i2c write failed, 0x10 = 23 [ 3.816280] tegra-i2c 3180000.i2c: no acknowledge from address 0x48 [ 3.816442] max9296 30-0048: max9296_write_reg:i2c write failed, 0x332 = f0 [ 3.816712] imx390 30-001b: Detected IMX390 sensor [ 3.816772] imx390 30-001c: probing v4l2 sensor. [ 3.817201] tegra-i2c 3180000.i2c: no acknowledge from address 0x62 [ 3.817366] max9295 30-0062: max9295_write_reg:i2c write failed, 0x0 = c0 [ 3.817724] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.817884] max9295 30-0060: max9295_write_reg:i2c write failed, 0x10 = 22 [ 3.876292] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.876454] max9295 30-0060: max9295_write_reg:i2c write failed, 0x6b = 12 [ 3.876815] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.876976] max9295 30-0060: max9295_write_reg:i2c write failed, 0x73 = 13 [ 3.877333] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.877494] max9295 30-0060: max9295_write_reg:i2c write failed, 0x7b = 32 [ 3.877851] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.878012] max9295 30-0060: max9295_write_reg:i2c write failed, 0x83 = 32 [ 3.878389] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.878549] max9295 30-0060: max9295_write_reg:i2c write failed, 0x93 = 32 [ 3.878883] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.879066] max9295 30-0060: max9295_write_reg:i2c write failed, 0x9b = 32 [ 3.879428] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.879588] max9295 30-0060: max9295_write_reg:i2c write failed, 0xa3 = 32 [ 3.879970] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.880173] max9295 30-0060: max9295_write_reg:i2c write failed, 0xab = 32 [ 3.880526] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.880687] max9295 30-0060: max9295_write_reg:i2c write failed, 0x44 = 38 [ 3.881047] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.881229] max9295 30-0060: max9295_write_reg:i2c write failed, 0x45 = 34 [ 3.881571] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.881727] max9295 30-0060: max9295_write_reg:i2c write failed, 0x2be = 90 [ 3.882083] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.882245] max9295 30-0060: max9295_write_reg:i2c write failed, 0x2bf = 60 [ 3.882611] tegra-i2c 3180000.i2c: no acknowledge from address 0x60 [ 3.882770] max9295 30-0060: max9295_write_reg:i2c write failed, 0x3f1 = 89 [ 3.882984] imx390 30-001c: couldn't create debugfs [ 3.883005] imx390 30-001c: Detected IMX390 sensor [ 3.883600] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.888257] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.888887] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supported [ 3.890388] parse_throttle_dt_data: Num cap clks = 4 [ 3.890392] parse_throttle_dt_data: clk=mcpu type=1 [ 3.890395] parse_throttle_dt_data: clk=bcpu type=2 [ 3.890401] parse_throttle_dt_data: clk=gpu type=4 [ 3.890404] parse_throttle_dt_data: clk=emc type=3 [ 3.891593] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.892251] FAN dev name: pwm-fan [ 3.892309] FAN:gpio request success. [ 3.892317] FAN: can't find tach_gpio [ 3.892361] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.892675] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 3.892681] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.893060] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.893065] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.893070] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.893073] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.893077] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.893108] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.893112] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.893116] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.893121] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.893125] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.894984] device-mapper: uevent: version 1.0.3 [ 3.896482] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.903755] cpufreq: platform driver Initialization: pass [ 3.908564] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.908692] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.914418] sdhci: Secure Digital Host Controller Interface driver [ 3.914420] sdhci: Copyright(c) Pierre Ossman [ 3.914422] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.915964] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.917927] CMDQ: cmdq_platfm_init successful [ 3.919131] CQE: CMD_TIMING bit set for R1B DCMD [ 3.921729] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.929286] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.929333] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.929991] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.931688] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 3.936464] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.972068] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.972130] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.980110] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.980171] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.065553] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.078977] mmc0: periodic cache flush enabled [ 4.078990] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.079648] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 4.079857] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 4.080163] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 4.080362] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 4.083081] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 4.227316] mmc1: hw tuning done ... [ 4.234213] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.770332] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.776426] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.784144] Parent Clock set for DC plld2 [ 4.850782] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 4.860322] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 4.868304] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 4.876878] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.884122] Extcon AUX1(HDMI) enable [ 4.888948] tegra-se-nvhost 15810000.se: initialized [ 4.895165] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.902262] tegra-se-nvhost 15820000.se: initialized [ 4.908548] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.915638] tegra-se-nvhost 15830000.se: initialized [ 4.921281] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.928362] tegra-se-nvhost 15840000.se: initialized [ 4.934360] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.940776] hidraw: raw HID events driver (C) Jiri Kosina [ 4.947453] usbcore: registered new interface driver usbhid [ 4.953105] usbhid: USB HID core driver [ 4.963397] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.974374] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.983460] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.993981] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 5.004686] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 5.017465] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 5.027960] tegradc 15210000.nvdisplay: blank - powerdown [ 5.027983] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 5.028098] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 5.028165] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 5.032106] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 5.032740] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 5.032743] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 5.033580] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 5.035024] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 5.035552] tegra186-aondbg aondbg: aondbg driver probe() OK [ 5.035731] register_ari_mca_banks: Registered MCA ROC:IOB [ 5.035814] register_ari_mca_banks: Registered MCA ROC:CCE [ 5.036165] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036168] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 5.036170] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 5.036230] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036232] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 5.036234] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 5.036287] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036289] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 5.036291] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 5.036349] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036351] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 5.036353] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 5.036405] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036407] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 5.036409] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 5.036471] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036476] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 5.036478] tegra18-bridge 2100000.axip2p: bridge probed OK [ 5.036531] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036536] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 5.036538] tegra18-bridge 2110000.axip2p: bridge probed OK [ 5.036592] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036597] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 5.036599] tegra18-bridge 2120000.axip2p: bridge probed OK [ 5.036653] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036658] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 5.036660] tegra18-bridge 2130000.axip2p: bridge probed OK [ 5.036720] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036723] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 5.036725] tegra18-bridge 2140000.axip2p: bridge probed OK [ 5.036777] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036782] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 5.036784] tegra18-bridge 2150000.axip2p: bridge probed OK [ 5.036835] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036840] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 5.036842] tegra18-bridge 2160000.axip2p: bridge probed OK [ 5.036894] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036899] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 5.036901] tegra18-bridge 2170000.axip2p: bridge probed OK [ 5.036955] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.036961] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 5.036963] tegra18-bridge 2180000.axip2p: bridge probed OK [ 5.037019] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.037024] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 5.037026] tegra18-bridge 2190000.axip2p: bridge probed OK [ 5.037078] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 5.037140] tegra18x_actmon d230000.actmon: in actmon_register()... [ 5.037762] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.038199] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 5.038314] denver_knobs_init:MTS_VERSION:43068234 [ 5.040131] nvpmodel: initialized successfully [ 5.041858] usbcore: registered new interface driver snd-usb-audio [ 5.060268] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 5.060528] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 5.067799] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.067801] Extcon AUX1(HDMI) disable [ 5.071270] OPE platform probe [ 5.071378] OPE platform probe successful [ 5.073624] tegra-asoc: sound: This is a dummy codec [ 5.090083] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 5.090178] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.090642] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.151847] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.151930] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.152009] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.152119] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.152199] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.152300] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.152387] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.152466] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.152540] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.152617] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.152695] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 5.152774] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 5.152853] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 5.152930] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 5.153010] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 5.153095] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 5.153173] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 5.153250] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 5.153349] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 5.153425] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 5.185518] tegradc 15210000.nvdisplay: unblank [ 5.186202] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.186301] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.186397] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 5.187864] Parent Clock set for DC plld2 [ 5.195312] tegradc 15210000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 5.196961] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 5.196970] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.197230] u32 classifier [ 5.197232] Actions configured [ 5.197320] Initializing XFRM netlink socket [ 5.199409] NET: Registered protocol family 10 [ 5.201285] NET: Registered protocol family 17 [ 5.201297] NET: Registered protocol family 15 [ 5.201505] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.201608] Bluetooth: RFCOMM socket layer initialized [ 5.201620] Bluetooth: RFCOMM ver 1.11 [ 5.201625] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.201629] Bluetooth: HIDP socket layer initialized [ 5.201648] 9pnet: Installing 9P2000 support [ 5.201695] Key type dns_resolver registered [ 5.201964] Registered cp15_barrier emulation handler [ 5.201975] Registered setend emulation handler [ 5.203372] registered taskstats version 1 [ 5.207835] isp 15600000.isp: initialized [ 5.212958] nvcsi 150c0000.nvcsi: initialized [ 5.218380] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 5.218468] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 5.218582] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 5.218753] input: gpio-keys as /devices/gpio-keys/input/input2 [ 5.220231] tegra-vi4 15700000.vi: initialized [ 5.221163] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 5.221173] tegra-vi4 15700000.vi: subdev imx390 30-001b bound [ 5.221600] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 5.221603] tegra-vi4 15700000.vi: subdev imx390 30-001c bound [ 5.236286] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.236288] Extcon AUX1(HDMI) enable [ 5.242876] random: crng init done [ 5.248818] tegra_rtc c2a0000.rtc: setting system clock to 2019-07-02 06:30:35 UTC (1562049035) [ 5.250400] mmcblk mmc0:0001: Card claimed for testing. [ 5.288450] bpmp: mounted debugfs mirror [ 5.290402] bwmgr: missing cdev-type property [ 5.296312] spmic-ldo0: disabling [ 5.296490] spmic-ldo1: disabling [ 5.296645] en-vdd-sd: disabling [ 5.296648] vdd-usb0-5v: disabling [ 5.296650] vdd-usb1-5v: disabling [ 5.296652] en-vdd-disp-3v3: disabling [ 5.296654] en-mdm-pwr-3v7: disabling [ 5.296678] en-vdd-disp-1v8: disabling [ 5.296680] en-vdd-cam-hv-2v8: disabling [ 5.296682] vdd-fan: disabling [ 5.296684] vdd-3v3: disabling [ 5.296686] en-vdd-vcm-2v8: disabling [ 5.296688] vdd-usb2-5v: disabling [ 5.296689] vdd-sys-bl: disabling [ 5.296691] en-vdd-sys: disabling [ 5.296693] ALSA device list: [ 5.296697] #0: tegra-hda at 0x3518000 irq 383 [ 5.296699] #1: tegra-snd-t186ref-mobile-rt565x [ 8.428510] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 8.438040] Extcon HDMI: HPD enabled [ 8.447298] tegradc 15210000.nvdisplay: hdmi: plugged [ 8.596757] EXT4-fs (mmcblk0p1): 10 orphan inodes deleted [ 8.604687] EXT4-fs (mmcblk0p1): recovery complete [ 8.619601] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.630235] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 8.643577] devtmpfs: mounted [ 8.651252] Freeing unused kernel memory: 8512K [ 8.839502] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.893191] cgroup: cgroup2: unknown option "nsdelegate" [ 8.923754] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.950983] systemd[1]: Detected architecture arm64. [ 9.054519] systemd[1]: Set hostname to . [ 9.203567] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 9.223431] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 9.430321] systemd[1]: Reached target User and Group Name Lookups. [ 9.446644] systemd[1]: Created slice System Slice. [ 9.457694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.470666] systemd[1]: Listening on Journal Socket. [ 9.481492] systemd[1]: Listening on RPCbind Server Activation Socket. [ 9.610538] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 9.648518] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 10.072743] systemd-journald[2306]: Received request to flush runtime journal from PID 1 [ 10.534842] tegra-xusb 3530000.xhci: cannot find firmware....retry after 1 second [ 10.699504] dhd_module_init in [ 10.699581] found wifi platform device bcmdhd_wlan [ 10.707757] wifi_platform_get_country_code_map: could not get country_code_map [ 10.707761] wifi_plat_dev_drv_probe:platform country code map is not available [ 10.707785] Power-up adapter 'DHD generic adapter' [ 10.707793] wifi_platform_set_power = 1 [ 10.804361] tegra-i2c c240000.i2c: no acknowledge from address 0x69 [ 10.817219] bmi160 1-0069: bmi_i2c_rd ERR: 0x00 [ 10.827690] bmi160 1-0069: bmi_init _id_i2c ERR [ 10.836322] bmi160 1-0069: bmi_remove [ 10.836325] bmi160 1-0069: bmi_probe done [ 10.941906] wifi_platform_bus_enumerate device present 1 [ 10.975811] wifi_platform_bus_enumerate device present 0 [ 10.983400] F1 signature read @0x18000000=0x17214354 [ 10.996297] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 10.997200] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 10.997282] wifi_platform_get_mac_addr [ 11.008155] ids dhd_log_netlink_init [ 11.008495] wl_create_event_handler(): thread:wl_event_handler:12ac started [ 11.008643] wl_event_handler : [ 11.008653] tsk Enter, tsk = 0xffffffc1d6841a90 [ 11.011059] dhd_attach(): thread:dhd_watchdog_thread:12ae started [ 11.011110] dhd_attach(): thread:dhd_dpc:12b1 started [ 11.011201] dhd_attach(): thread:dhd_rxf:12b2 started [ 11.011215] dhd_deferred_work_init: work queue initialized [ 11.012076] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 11.012886] Register interface [wlan0] MAC: 00:04:4b:a7:c4:c2 [ 11.012891] dhd_prot_ioctl : bus is down. we have nothing to do [ 11.013024] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 102 [ 11.015311] wifi_platform_set_power = 0 [ 11.020297] using random self ethernet address [ 11.036148] using random host ethernet address [ 11.127040] Mass Storage Function, version: 2009/09/11 [ 11.127045] LUN: removable file: (no medium) [ 11.139301] using random self ethernet address [ 11.160134] using random host ethernet address [ 11.171268] rndis0: HOST MAC 12:19:87:40:2b:1c [ 11.171444] rndis0: MAC 12:19:87:40:2b:1d [ 11.173522] usb0: HOST MAC 12:19:87:40:2b:1e [ 11.174468] usb0: MAC 12:19:87:40:2b:1f [ 11.174498] tegra-xudc-new 3550000.xudc: exiting ELPG [ 11.180129] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 11.180152] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 11.180190] tegra-xudc-new 3550000.xudc: entering ELPG [ 11.182239] tegra-xudc-new 3550000.xudc: entering ELPG done [ 11.182601] tegra-xudc-new 3550000.xudc: exiting ELPG [ 11.189751] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 11.189782] tegra-xudc-new 3550000.xudc: entering ELPG [ 11.191122] tegra-xudc-new 3550000.xudc: entering ELPG done [ 11.219926] l4tbr0: port 1(rndis0) entered blocking state [ 11.219930] l4tbr0: port 1(rndis0) entered disabled state [ 11.220151] device rndis0 entered promiscuous mode [ 11.255613] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 11.270608] l4tbr0: port 2(usb0) entered blocking state [ 11.270614] l4tbr0: port 2(usb0) entered disabled state [ 11.276805] device usb0 entered promiscuous mode [ 11.294080] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 11.294084] l4tbr0: port 2(usb0) entered blocking state [ 11.294086] l4tbr0: port 2(usb0) entered forwarding state [ 11.549429] tegra-xusb 3530000.xhci: Firmware timestamp: 2018-12-26 10:30:04 UTC, Version: 55.12 release [ 11.576102] tegra-xusb 3530000.xhci: xHCI Host Controller [ 11.576127] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 11.576974] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 11.577013] tegra-xusb 3530000.xhci: irq 70, io mem 0x03530000 [ 11.577195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.577199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.577203] usb usb1: Product: xHCI Host Controller [ 11.577206] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 11.577208] usb usb1: SerialNumber: 3530000.xhci [ 11.577580] hub 1-0:1.0: USB hub found [ 11.577606] hub 1-0:1.0: 4 ports detected [ 11.577886] tegra-xusb 3530000.xhci: xHCI Host Controller [ 11.577894] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 11.578019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.578024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.578027] usb usb2: Product: xHCI Host Controller [ 11.578029] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 11.578032] usb usb2: SerialNumber: 3530000.xhci [ 11.578320] hub 2-0:1.0: USB hub found [ 11.578342] hub 2-0:1.0: 3 ports detected [ 11.584468] Wake76 for irq=199 [ 11.584474] Wake77 for irq=199 [ 11.584475] Wake78 for irq=199 [ 11.584477] Wake79 for irq=199 [ 11.584478] Wake80 for irq=199 [ 11.584480] Wake81 for irq=199 [ 11.584481] Wake82 for irq=199 [ 11.625213] nvgpu: 17000000.gp10b railgate_enable_store:343 [INFO] railgate is disabled. [ 11.680353] usb usb1: usb_suspend_both: status 0 [ 11.680437] usb usb2: usb_suspend_both: status 0 [ 12.180204] l4tbr0: port 2(usb0) entered disabled state [ 14.164411] tegra-xusb 3530000.xhci: entering ELPG [ 14.168641] tegra-xusb 3530000.xhci: entering ELPG done [ 16.422725] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.500908] gpio tegra-gpio wake18 for gpio=101(M:5) [ 16.509277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.549624] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.549738] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 16.549746] wl_android_wifi_on in [ 16.549751] wifi_platform_set_power = 1 [ 16.762345] vdd-1v8: voltage operation not allowed [ 16.769956] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.800238] vdd-1v8: voltage operation not allowed [ 16.808467] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.837046] vdd-1v8: voltage operation not allowed [ 16.845799] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.859823] vdd-1v8: voltage operation not allowed [ 16.868040] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.984143] vdd-1v8: voltage operation not allowed [ 16.993460] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 17.003986] vdd-1v8: voltage operation not allowed [ 17.014143] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 17.025218] vdd-1v8: voltage operation not allowed [ 17.032889] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 17.042357] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 102 [ 17.042853] F1 signature read @0x18000000=0x17214354 [ 17.047136] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 17.047732] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 17.142362] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 17.185007] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 17.185322] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 17.185388] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 17.185391] Enabling wake69 [ 17.186266] wifi_platform_get_mac_addr [ 17.188593] Firmware up: op_mode=0x0005, MAC=00:04:4b:a7:c4:c2 [ 17.193464] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 17.193505] Skipping the clm download. len:0 memblk: (null) [ 17.196080] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 17.201281] Firmware version = wl0: Oct 31 2018 11:34:03 version 7.35.349.66 (r708495 CY) FWID 01-ade683bb [ 17.203732] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 17.306634] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 17.306638] P2P interface registered [ 17.315951] WLC_E_IF: NO_IF set, event Ignored [ 17.323618] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.510060] tegradc 15210000.nvdisplay: blank - powerdown [ 17.563925] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 17.563928] Extcon AUX1(HDMI) disable [ 17.587362] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 17.587645] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 17.588428] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 17.588632] tegradc 15210000.nvdisplay: unblank [ 17.589293] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 17.589390] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 17.589481] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 17.591065] Parent Clock set for DC plld2 [ 17.598547] tegradc 15210000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 17.600196] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 17.600222] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 17.636536] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 17.636539] Extcon AUX1(HDMI) enable [ 17.636652] tegradc 15210000.nvdisplay: unblank [ 19.437373] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 19.437985] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.443785] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.443800] Bluetooth: BNEP socket layer initialized [ 22.741449] fuse init (API version 7.26) [ 23.109495] tegradc 15210000.nvdisplay: unblank