[BEGIN] 21/3/23 13:42:43 Ubuntu 18.04.3 LTS opt-desktop ttyS0 opt-desktop login: Ubuntu 18.04.3 LTS opt-desktop ttyS0 opt-desktop login: Ubuntu 18.04.3 LTS opt-desktop ttyS0 opt-desktop login: opt Password: Last login: 二 3月 23 12:25:10 CST 2021 on ttyS0 Welcome to Ubuntu 18.04.3 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 479 packages can be updated. 354 updates are security updates. opt@opt-desktop:~$ dmesg -wH [3月23 13:13] Booting Linux on physical CPU 0x100 [ +0.000000] Linux version 4.9.140-tegra (opt@opt-desktop) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #3 SMP PREEMPT Fri Oct 23 15:02:38 CST 2020 [ +0.000000] Boot CPU: AArch64 Processor [411fd073] [ +0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ +0.000000] OF: fdt: - 80000000 , 70000000 [ +0.000000] OF: fdt: - f0200000 , 185600000 [ +0.000000] OF: fdt: - 275e00000 , 200000 [ +0.000000] OF: fdt: - 276600000 , 200000 [ +0.000000] OF: fdt: - 277000000 , 200000 [ +0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ +0.000000] bootconsole [uart8250] enabled [ +0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ +0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ +0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ +0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ +0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ +0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ +0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ +0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ +0.000000] On node 0 totalpages: 2055168 [ +0.000000] DMA zone: 8192 pages used for memmap [ +0.000000] DMA zone: 0 pages reserved [ +0.000000] DMA zone: 523776 pages, LIFO batch:31 [ +0.000000] Normal zone: 24008 pages used for memmap [ +0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ +0.000000] psci: probing for conduit method from DT. [ +0.000000] psci: PSCIv1.0 detected in firmware. [ +0.000000] psci: Using standard PSCI v0.2 function IDs [ +0.000000] psci: MIGRATE_INFO_TYPE not supported. [ +0.000000] psci: SMC Calling Convention v1.1 [ +0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61592 r8192 d32616 u102400 [ +0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ +0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ +0.000000] Speculative Store Bypass Disable mitigation not required [ +0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ +0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet [ +0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ +0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ +0.000000] log_buf_len min size: 32768 bytes [ +0.000000] log_buf_len: 262144 bytes [ +0.000000] early log buf free: 29504(90%) [ +0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ +0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ +0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ +0.000000] Memory: 7968692K/8220672K available (15230K kernel code, 2926K rwdata, 6956K rodata, 8576K init, 609K bss, 186444K reserved, 65536K cma-reserved) [ +0.000000] Virtual kernel memory layout: [ +0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ +0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ +0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ +0.000000] .rodata : 0xffffff8008f60000 - 0xffffff8009630000 ( 6976 KB) [ +0.000000] .init : 0xffffff8009630000 - 0xffffff8009e90000 ( 8576 KB) [ +0.000000] .data : 0xffffff8009e90000 - 0xffffff800a16b808 ( 2927 KB) [ +0.000000] .bss : 0xffffff800a16b808 - 0xffffff800a203dbc ( 610 KB) [ +0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ +0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ +0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ +0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ +0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ +0.000000] Preemptible hierarchical RCU implementation. [ +0.000000] Build-time adjustment of leaf fanout to 64. [ +0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ +0.000000] NR_IRQS:64 nr_irqs:64 0 [ +0.000000] GIC: Using split EOI/Deactivate mode [ +0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ +0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ +0.000000] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ +0.001623] Console: colour dummy device 80x25 [ +0.000006] console [tty0] enabled [ +0.000003] bootconsole [uart8250] disabled [ +0.000007] kmemleak: Kernel memory leak detector disabled [ +0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ +0.000007] pid_max: default: 32768 minimum: 301 [ +0.000315] Security Framework initialized [ +0.000157] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ +0.000005] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ +0.000594] ftrace: allocating 47001 entries in 184 pages [ +0.124800] sched-energy: Sched-energy-costs installed from DT [ +0.000010] ASID allocator initialised with 65536 entries [ +0.036764] tegra-id: chipid=21817. [ +0.000007] tegra-id: opt_subrevision=1. [ +0.000017] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ +0.000008] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-dsi-hdmi-dp.dts [ +0.000005] DTB Build time: Dec 9 2019 22:56:05 [ +0.049316] CPU1: Booted secondary processor [4e0f0030] [ +0.031638] CPU2: Booted secondary processor [4e0f0030] [ +0.031789] CPU3: Booted secondary processor [411fd073] [ +0.031980] CPU4: Booted secondary processor [411fd073] [ +0.032009] CPU5: Booted secondary processor [411fd073] [ +0.000054] Brought up 6 CPUs [ +0.000004] SMP: Total of 6 processors activated. [ +0.000005] CPU features: detected feature: 32-bit EL0 Support [ +0.000796] CPU: All CPU(s) started at EL2 [ +0.000050] alternatives: patching kernel code [ +0.009513] devtmpfs: initialized [ +0.038176] Initilizing CustomIPI irq domain [ +0.000195] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ +0.000009] futex hash table entries: 2048 (order: 5, 131072 bytes) [ +0.000830] pinctrl core: initialized pinctrl subsystem [ +0.000203] OS set in device tree is not L4T. [ +0.000162] regulator-dummy: no parameters [ +0.000136] Initializing plugin-manager [ +0.000050] Plugin module not found [ +0.000037] Plugin-manager status disabled [ +0.001848] NET: Registered protocol family 16 [ +0.000647] pstore: using zlib compression [ +0.000013] console [pstore-1] enabled [ +0.000003] pstore: Registered ramoops as persistent store backend [ +0.000003] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ +0.018875] cpuidle: using governor menu [ +0.001508] bpmp: waiting for handshake [ +0.000004] bpmp: handshake completed [ +0.000014] bpmp: synchronizing channels [ +0.000016] bpmp: channels synchronized [ +0.000004] bpmp: mail init ok [ +0.002060] arm-smmu 12000000.iommu: probing hardware configuration... [ +0.000004] arm-smmu 12000000.iommu: SMMUv2 with: [ +0.000005] arm-smmu 12000000.iommu: stage 1 translation [ +0.000003] arm-smmu 12000000.iommu: stage 2 translation [ +0.000002] arm-smmu 12000000.iommu: nested translation [ +0.000006] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ +0.000006] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ +0.000003] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ +0.000005] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ +0.000003] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ +0.002086] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e94000) [ +0.000011] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ +0.002436] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ +0.001955] Registering BPMP clocks... [ +0.000094] tegra_bpmp_clk_init: clock init ok (638 clks) [ +0.002270] tegra_powergate_init: DONE [ +0.000008] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-dsi-hdmi-dp.dts [ +0.000005] DTB Build time: Dec 9 2019 22:56:05 [ +0.002070] Tegra reboot handler registered. [ +0.001525] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ +0.000066] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ +0.000012] tegra-pmc: ### PMC reset source: TEGRA_BCCPLEX_WATCHDOG [ +0.000002] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ +0.000003] tegra-pmc: ### PMC reset status reg: 0x9 [ +0.000154] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ +0.000011] tegra-pmc c360000.pmc: IO padctrl driver initialized [ +0.000329] iommu: Adding device 3460000.sdhci to group 0 [ +0.000674] iommu: Adding device 3400000.sdhci to group 1 [ +0.001029] iommu: Adding device 3507000.ahci-sata to group 2 [ +0.000011] arm-smmu: forcing sodev map for 3507000.ahci-sata [ +0.000433] iommu: Adding device 3160000.i2c to group 3 [ +0.000429] iommu: Adding device c240000.i2c to group 4 [ +0.000334] iommu: Adding device 3180000.i2c to group 5 [ +0.000328] iommu: Adding device 3190000.i2c to group 6 [ +0.000460] iommu: Adding device 31b0000.i2c to group 7 [ +0.000328] iommu: Adding device 31c0000.i2c to group 8 [ +0.000327] iommu: Adding device c250000.i2c to group 9 [ +0.000324] iommu: Adding device 31e0000.i2c to group 10 [ +0.001483] iommu: Adding device 3210000.spi to group 11 [ +0.000330] iommu: Adding device c260000.spi to group 12 [ +0.000327] iommu: Adding device 3240000.spi to group 13 [ +0.000711] iommu: Adding device 3100000.serial to group 14 [ +0.000339] iommu: Adding device 3110000.serial to group 15 [ +0.000323] iommu: Adding device c280000.serial to group 16 [ +0.000324] iommu: Adding device 3130000.serial to group 17 [ +0.001319] iommu: Adding device 2490000.ether_qos to group 18 [ +0.000011] arm-smmu: forcing sodev map for 2490000.ether_qos [ +0.000660] iommu: Adding device b000000.rtcpu to group 19 [ +0.002199] iommu: Adding device 13e10000.host1x to group 20 [ +0.000315] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ +0.000291] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ +0.000305] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ +0.000291] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ +0.000302] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ +0.000299] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ +0.000308] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ +0.000294] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ +0.000486] iommu: Adding device 150c0000.nvcsi to group 29 [ +0.000640] iommu: Adding device 15700000.vi to group 30 [ +0.000349] iommu: Adding device 15600000.isp to group 31 [ +0.000456] iommu: Adding device 15210000.nvdisplay to group 32 [ +0.000595] iommu: Adding device 15220000.nvdisplay to group 33 [ +0.000579] iommu: Adding device 15340000.vic to group 34 [ +0.000218] iommu: Adding device 154c0000.nvenc to group 35 [ +0.000207] iommu: Adding device 15480000.nvdec to group 36 [ +0.000350] iommu: Adding device 15380000.nvjpg to group 37 [ +0.000214] iommu: Adding device 15500000.tsec to group 38 [ +0.000229] iommu: Adding device 15100000.tsecb to group 39 [ +0.000987] iommu: Adding device 15810000.se to group 40 [ +0.000208] iommu: Adding device 15820000.se to group 41 [ +0.000210] iommu: Adding device 15830000.se to group 42 [ +0.000206] iommu: Adding device 15840000.se to group 43 [ +0.000875] iommu: Adding device smmu_test to group 44 [ +0.000574] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ +0.000010] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ +0.000010] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ +0.000010] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ +0.000010] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ +0.000009] nv-tegra-mc 2c10000.mc: No mssnvlink node [ +0.000008] mc-err: mcerr ops are set to t18x [ +0.000138] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ +0.001113] iommu: Adding device 3530000.xhci to group 45 [ +0.000011] arm-smmu: forcing sodev map for 3530000.xhci [ +0.000436] iommu: Adding device 3550000.xudc to group 46 [ +0.000010] arm-smmu: forcing sodev map for 3550000.xudc [ +0.000698] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ +0.000006] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ +0.000553] iommu: Adding device 17000000.gp10b to group 47 [ +0.001014] tegra-reset 5000000.clock: registered 193 resets. [ +0.002204] iommu: Adding device d000000.bpmp to group 48 [ +0.000202] bpmp: ping status is 0 [ +0.000098] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ +0.002362] bpmp d000000.bpmp: probe ok [ +0.003074] iommu: Adding device 2600000.dma to group 49 [ +0.001265] GPIO line 461 (camera-control-output-low) hogged as output/low [ +0.000027] GPIO line 456 (camera-control-output-low) hogged as output/low [ +0.000025] GPIO line 457 (camera-control-output-low) hogged as output/low [ +0.000023] GPIO line 426 (camera-control-output-low) hogged as output/low [ +0.000027] GPIO line 424 (wifi-enable) hogged as output/high [ +0.000024] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ +0.000024] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ +0.000191] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ +0.003731] GPIO line 315 (wifi-wake-ap) hogged as input [ +0.000166] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ +0.001588] iommu: Adding device 10003000.pcie-controller to group 50 [ +0.000015] arm-smmu: forcing sodev map for 10003000.pcie-controller [ +0.000318] iommu: Adding device sound to group 51 [ +0.000360] iommu: Adding device 3510000.hda to group 52 [ +0.007610] iommu: Adding device c1a0000.aon to group 53 [ +0.000429] vdd-ac-bat: 5000 mV [ +0.001752] vdd-1v8-ap: 1800 mV [ +0.019915] random: fast init done [ +0.013302] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ +0.006325] eventlib_kernel: keventlib is initialized, test id: 0 [ +0.000532] SCSI subsystem initialized [ +0.000293] libata version 3.00 loaded. [ +0.000441] usbcore: registered new interface driver usbfs [ +0.000057] usbcore: registered new interface driver hub [ +0.000119] usbcore: registered new device driver usb [ +0.003744] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ +0.000064] pca953x 0-0074: failed reading register [ +0.000103] pca953x: probe of 0-0074 failed with error -121 [ +0.000597] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ +0.000037] pca953x 0-0077: failed reading register [ +0.000120] pca953x: probe of 0-0077 failed with error -121 [ +0.013448] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ +0.005453] vddio-ddr: at 1125 mV [ +0.003736] avdd_dsi_csi: 1200 mV [ +0.004001] vdd-1v8: 1800 mV [ +0.003995] vdd-3v3-sys: 3300 mV [ +0.001081] spmic-ldo0: at 1800 mV [ +0.000888] spmic-ldo1: at 800 mV [ +0.001690] vddio-3v3: 3300 mV [ +0.000920] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ +0.003069] vdd-rtc: at 800 mV [ +0.000800] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ +0.003241] spmic-ldo6: at 1500 mV [ +0.003959] vdd-pex-1v00: 1000 mV [ +0.000795] dvdd-pex: 1000 mV [ +0.002954] GPIO line 253 (spmic_gpio_input) hogged as input [ +0.000182] GPIO line 254 (spmic_gpio_input) hogged as input [ +0.000310] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ +0.000311] max77620 4-003c: max77620 probe successful [ +0.000653] media: Linux media interface: v0.10 [ +0.000053] Linux video capture interface: v2.00 [ +0.004400] pps_core: LinuxPPS API ver. 1 registered [ +0.000017] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ +0.000028] PTP clock support registered [ +0.000681] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ +0.000034] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ +0.004272] tegra_fiq_debugger_init: found FIQ source (IRQ 388) [ +0.005694] trusty trusty: trusty version: Built: 22:43:54 Dec 9 2019 [ +0.000042] trusty trusty: selected api version: 3 (requested 3) [ +0.001190] Advanced Linux Sound Architecture Driver Initialized. [ +0.000521] Bluetooth: Core ver 2.22 [ +0.000050] NET: Registered protocol family 31 [ +0.000012] Bluetooth: HCI device and connection manager initialized [ +0.000017] Bluetooth: HCI socket layer initialized [ +0.000016] Bluetooth: L2CAP socket layer initialized [ +0.000030] Bluetooth: SCO socket layer initialized [ +0.001570] en-vdd-sd: 3300 mV [ +0.000552] vdd-usb0-5v: 5000 mV [ +0.000403] vdd-usb1-5v: 5000 mV [ +0.000597] vdd-3v3: 3300 mV [ +0.000332] en-vdd-vcm-2v8: 2800 mV [ +0.000292] vdd-sys-bl: 3300 mV [ +0.003310] camchar: rtcpu character device driver loaded [ +0.000726] gpio tegra-gpio wake53 for gpio=159(X:7) [ +0.002052] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ +0.001414] clocksource: Switched to clocksource arch_sys_counter [ +0.041012] VFS: Disk quotas dquot_6.6.0 [ +0.000235] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ +0.000592] nvmap_heap_init: nvmap_heap_init: created heap block cache [ +0.000977] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ +0.000010] nvmap_page_pool_init: Total RAM pages: 2008557 [ +0.000008] nvmap_page_pool_init: nvmap page pool size: 251069 pages (980 MB) [ +0.000122] nvmap_background_zero_thread: PP zeroing thread starting. [ +0.004052] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ +0.012318] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ +0.000191] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ +0.000520] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ +0.000114] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ +0.000212] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ +0.000140] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ +0.000199] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ +0.000249] la/ptsa driver initialized. [ +0.000012] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ +0.000005] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ +0.001123] NET: Registered protocol family 2 [ +0.002033] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ +0.000654] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ +0.000768] TCP: Hash tables configured (established 65536 bind 65536) [ +0.000056] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ +0.000182] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ +0.000862] NET: Registered protocol family 1 [ +0.001100] RPC: Registered named UNIX socket transport module. [ +0.000007] RPC: Registered udp transport module. [ +0.000005] RPC: Registered tcp transport module. [ +0.000004] RPC: Registered tcp NFSv4.1 backchannel transport module. [ +0.000023] PCI: CLS 0 bytes, default 64 [ +0.000272] Trying to unpack rootfs image as initramfs... [ +0.195762] Freeing initrd memory: 5432K [ +0.023172] host1x 13e10000.host1x: initialized [ +0.002291] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ +0.005042] audit: initializing netlink subsys (disabled) [ +0.000039] audit: type=2000 audit(0.792:1): initialized [ +0.000731] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ +0.013455] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ +0.002559] ntfs: driver 2.1.32 [Flags: R/W]. [ +0.001548] 9p: Installing v9fs 9p2000 file system support [ +0.006081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ +0.000172] io scheduler noop registered [ +0.000618] io scheduler cfq registered (default) [ +0.005020] gic 2a41000.agic-controller: GIC IRQ controller registered [ +0.123302] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ +0.040211] iommu: Adding device 2993000.adsp to group 55 [ +0.001188] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ +0.003441] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ +0.003867] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ +0.001540] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ +0.001455] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ +0.001309] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ +0.002776] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ +0.001120] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ +0.000412] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ +0.000182] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ +0.000242] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ +0.000010] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ +0.003296] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ +0.001547] tsec 15500000.tsec: initialized [ +0.001296] tsec 15100000.tsecb: initialized [ +0.004626] nvdec 15480000.nvdec: initialized [ +0.008299] falcon 15340000.vic: initialized [ +0.001584] falcon 154c0000.nvenc: initialized [ +0.001438] falcon 15380000.nvjpg: initialized [ +0.003517] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ +0.001756] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ +0.001894] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ +0.001667] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ +0.001534] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ +0.001599] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ +0.001594] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ +0.001535] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ +0.003857] tegradccommon 15200000.dc_common: host1x channel mapped [ +0.000016] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ +0.000051] tegradccommon 15200000.dc_common: dma mapping done [ +0.001689] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=392 [ +0.000230] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ +0.000050] generic_infoframe_type: 0x87 [ +0.000085] tegradc 15210000.nvdisplay: DT parsed successfully [ +0.000027] tegradc 15210000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ +0.000354] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ +0.001053] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ +0.000027] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ +0.001006] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ +0.000007] tegra_cec 3960000.tegra_cec: probed [ +0.005265] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ +0.000010] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ +0.000005] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ +0.000412] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ +0.000010] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ +0.001027] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ +0.007956] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ +0.000011] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ +0.004020] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ +0.000824] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ +0.000506] kfuse 3830000.kfuse: initialized [ +0.001672] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ +0.005182] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ +0.003147] console [ttyS0] disabled [ +0.000087] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ +0.019753] console [ttyS0] enabled [ +0.002269] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ +0.000552] tegradc 15210000.nvdisplay: probed [ +0.000944] Console: switching to colour frame buffer device 160x50 [ +0.000101] tegradc 15210000.nvdisplay: fb registered [ +0.000223] gpio tegra-gpio wake21 for gpio=121(P:1) [ +0.000294] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ +0.000367] serial-tegra 3130000.serial: RX in PIO mode [ +0.000665] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ +0.000208] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ +0.000134] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ +0.002788] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ +0.001511] [drm] Initialized [ +0.004098] Parent Clock set for DC plld2 [ +0.003540] tegradc 15210000.nvdisplay: hdmi: tmds rate:71107K prod-setting:prod_c_hdmi_54m_111m [ +0.001259] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ +0.000007] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ +0.002068] brd: module loaded [ +0.005157] loop: module loaded [ +0.000091] tegra_profiler: version: 1.139, samples/io: 47/27 [ +0.000130] tegra_profiler: auth: init [ +0.000556] nct1008_nct72 7-004c: starting parse dt [ +0.000139] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ +0.000014] nct1008_nct72 7-004c: success parsing dt [ +0.000129] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ +0.000285] THERMAL EST: found 3 subdevs [ +0.000007] THERMAL EST num_resources: 0 [ +0.000006] [THERMAL EST subdev 0] [ +0.000007] [THERMAL EST subdev 1] [ +0.000006] [THERMAL EST subdev 2] [ +0.000337] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ +0.000005] THERMAL EST: thz register success. [ +0.000145] THERMAL EST: end of probe, return err: 0 [ +0.001056] hisi_sas: driver version v1.6 [ +0.004332] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ +0.000014] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ +0.000985] scsi host0: tegra_ahci [ +0.000994] scsi host1: tegra_ahci [ +0.000194] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ +0.000006] ata2: DUMMY [ +0.006596] libphy: Fixed MDIO Bus: probed [ +0.000490] tun: Universal TUN/TAP device driver, 1.6 [ +0.000006] tun: (C) 1999-2004 Max Krasnyansky [ +0.000782] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ +0.000006] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ +0.000040] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ +0.000004] igb: Copyright (c) 2007-2014 Intel Corporation. [ +0.000034] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ +0.000004] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ +0.000066] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ +0.000005] Copyright(c) 1999 - 2017 Intel Corporation. [ +0.007525] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ +0.003598] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ +0.000007] Extcon AUX1(HDMI) enable [ +0.000488] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d f 92 7 [ +0.000149] libphy: dwc_phy: probed [ +0.000459] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ +0.000563] tegradc 15220000.nvdisplay: disp1 connected to head2->/host1x/sor [ +0.000216] tegradc 15220000.nvdisplay: DT parsed successfully [ +0.000033] tegradc 15220000.nvdisplay: Display dc.ffffff800ba90000 registered with id=1 [ +0.001083] tegradc 15220000.nvdisplay: vblank syncpt # 11 for dc 2 [ +0.000011] tegradc 15220000.nvdisplay: vpulse3 syncpt # 12 for dc 2 [ +0.001230] PPP generic driver version 2.4.2 [ +0.000029] nct1008_nct72 7-004c: LOC shutdown limit 107 [ +0.000145] PPP BSD Compression module registered [ +0.000007] PPP Deflate Compression module registered [ +0.000050] PPP MPPE Compression module registered [ +0.000007] NET: Registered protocol family 24 [ +0.000105] usbcore: registered new interface driver r8152 [ +0.000055] usbcore: registered new interface driver asix [ +0.000050] usbcore: registered new interface driver ax88179_178a [ +0.000026] usbcore: registered new interface driver cdc_ether [ +0.000023] usbcore: registered new interface driver net1080 [ +0.000026] usbcore: registered new interface driver cdc_subset [ +0.000022] nct1008_nct72 7-004c: EXT shutdown limit 107 [ +0.000002] usbcore: registered new interface driver zaurus [ +0.000037] usbcore: registered new interface driver cdc_ncm [ +0.000176] VFIO - User Level meta-driver version: 0.3 [ +0.005856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ +0.000017] ehci-pci: EHCI PCI platform driver [ +0.000036] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ +0.000009] ohci-pci: OHCI PCI platform driver [ +0.000034] ohci-platform: OHCI generic platform driver [ +0.007292] tegra-xusb 3530000.xhci: No USB port has OTG_CAP [ +0.000018] tegradc 15220000.nvdisplay: probed [ +0.000280] tegradc 15220000.nvdisplay: fb registered [ +0.002058] usbcore: registered new interface driver uas [ +0.000055] usbcore: registered new interface driver usb-storage [ +0.000078] usbcore: registered new interface driver usbserial [ +0.001636] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ +0.000005] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ +0.000007] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ +0.000010] tegradc 15220000.nvdisplay: blank - powerdown [ +0.000011] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ +0.000003] Extcon DP: HPD disabled [ +0.000002] hpd: hpd_switch 0 [ +0.000003] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ +0.000007] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ +0.000007] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ +0.003360] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-07-08 19:32:42 UTC, Version: 55.15 release [ +0.000954] tegra-xudc-new 3550000.xudc: device count: 1 [ +0.001329] tegra-xudc-new 3550000.xudc: vbus state: 0 [ +0.000096] tegra-xudc-new 3550000.xudc: entering ELPG [ +0.001814] tegra-xudc-new 3550000.xudc: entering ELPG done [ +0.000406] mousedev: PS/2 mouse device common for all mice [ +0.000067] usbcore: registered new interface driver xpad [ +0.007108] nct1008_nct72 7-004c: initial LOC temp: 29000 [ +0.000310] nct1008_nct72 7-004c: initial EXT temp: 30750 [ +0.000607] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ +0.000295] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ +0.000186] nct1008_nct72 7-004c: nct1008_probe: initialized [ +0.041226] tegra-xusb 3530000.xhci: xHCI Host Controller [ +0.000023] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ +0.000865] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ +0.000044] tegra-xusb 3530000.xhci: irq 72, io mem 0x03530000 [ +0.000232] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ +0.000008] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000007] usb usb1: Product: xHCI Host Controller [ +0.000005] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ +0.000005] usb usb1: SerialNumber: 3530000.xhci [ +0.000428] hub 1-0:1.0: USB hub found [ +0.000045] hub 1-0:1.0: 4 ports detected [ +0.000423] tegra-xusb 3530000.xhci: xHCI Host Controller [ +0.000046] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ +0.000234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ +0.000008] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0.000005] usb usb2: Product: xHCI Host Controller [ +0.000005] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ +0.000006] usb usb2: SerialNumber: 3530000.xhci [ +0.000528] hub 2-0:1.0: USB hub found [ +0.000056] hub 2-0:1.0: 3 ports detected [ +0.038268] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ +0.001367] Wake73 for irq=42 [ +0.001349] rtc rtc1: alarm rtc device [ +0.000018] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ +0.000026] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ +0.000235] i2c /dev entries driver [ +0.003105] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ +0.007126] parse_throttle_dt_data: Num cap clks = 4 [ +0.000009] parse_throttle_dt_data: clk=mcpu type=1 [ +0.000005] parse_throttle_dt_data: clk=bcpu type=2 [ +0.000010] parse_throttle_dt_data: clk=gpu type=4 [ +0.000005] parse_throttle_dt_data: clk=emc type=3 [ +0.001248] tegra_throttle_probe: probe successful. #cdevs=4 [ +0.000476] tegradc 15210000.nvdisplay: blank - powerdown [ +0.000332] FAN: coudln't get the regulator [ +0.001895] device-mapper: uevent: version 1.0.3 [ +0.000925] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ +0.000326] CPU EMC frequency mapping table: default setting [ +0.004664] cpufreq: platform driver Initialization: pass [ +0.000726] cpuidle: Initializing cpuidle driver init for Denver cluster [ +0.000100] cpuidle: Initializing cpuidle driver init for A57 cluster [ +0.000933] sdhci: Secure Digital Host Controller Interface driver [ +0.000002] sdhci: Copyright(c) Pierre Ossman [ +0.000001] sdhci-pltfm: SDHCI platform and OF driver helper [ +0.001383] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ +0.001857] CMDQ: cmdq_platfm_init successful [ +0.001091] CQE: CMD_TIMING bit set for R1B DCMD [ +0.001765] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ +0.002654] sdhci-tegra 3400000.sdhci: Got CD GPIO [ +0.000046] sdhci-tegra 3400000.sdhci: Got WP GPIO [ +0.003185] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ +0.001683] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 259 [ +0.004375] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ +0.000905] tegra-se-nvhost 15810000.se: initialized [ +0.001027] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ +0.000655] tegra-se-nvhost 15820000.se: initialized [ +0.000823] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ +0.000625] tegra-se-nvhost 15830000.se: initialized [ +0.000686] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ +0.000579] tegra-se-nvhost 15840000.se: initialized [ +0.000780] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ +0.000238] hidraw: raw HID events driver (C) Jiri Kosina [ +0.000765] usbcore: registered new interface driver usbhid [ +0.000002] usbhid: USB HID core driver [ +0.001919] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ +0.000028] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ +0.000082] ina3221x: probe of 0-0042 failed with error -121 [ +0.000219] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ +0.000027] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ +0.000065] ina3221x: probe of 0-0043 failed with error -121 [ +0.002354] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ +0.002231] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ +0.000214] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ +0.000100] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ +0.000176] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ +0.000601] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ +0.000058] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ +0.000043] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ +0.000038] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ +0.000079] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ +0.000276] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ +0.000001] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ +0.000921] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ +0.000207] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ +0.000002] Extcon AUX1(HDMI) disable [ +0.001236] tegra_aon c1a0000.aon: tegra aon driver probe OK [ +0.000374] tegra186-aondbg aondbg: aondbg driver probe() OK [ +0.000138] register_ari_mca_banks: Registered MCA ROC:IOB [ +0.000064] register_ari_mca_banks: Registered MCA ROC:CCE [ +0.000276] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000002] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2390000.axi2apb: bridge probed OK [ +0.000049] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000002] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ +0.000039] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000002] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ +0.000040] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000002] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ +0.000038] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000001] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ +0.000002] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ +0.000039] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000003] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2100000.axip2p: bridge probed OK [ +0.000040] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000004] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2110000.axip2p: bridge probed OK [ +0.000037] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000004] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2120000.axip2p: bridge probed OK [ +0.000040] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000004] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2130000.axip2p: bridge probed OK [ +0.000037] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000002] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2140000.axip2p: bridge probed OK [ +0.000037] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000004] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2150000.axip2p: bridge probed OK [ +0.000038] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000005] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2160000.axip2p: bridge probed OK [ +0.000039] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000004] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2170000.axip2p: bridge probed OK [ +0.000037] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000005] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2180000.axip2p: bridge probed OK [ +0.000037] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ +0.000004] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ +0.000001] tegra18-bridge 2190000.axip2p: bridge probed OK [ +0.000051] **** A57 ECC: Enabled [ +0.000001] tegra18_a57_serr_init: on CPU 3 a A57 Core [ +0.000055] tegra18x_actmon d230000.actmon: in actmon_register()... [ +0.000434] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ +0.000397] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ +0.000103] denver_knobs_init:MTS_VERSION:47926945 [ +0.001543] nvpmodel: initialized successfully [ +0.000768] trusty-virtio trusty:virtio: initializing [ +0.000089] trusty_ipc virtio0: vring0: va(pa) ffffffc1e7d3c000(0) qsz 32 notifyid 1 [ +0.000005] trusty_ipc virtio0: vring1: va(pa) ffffffc1e7d3e000(0) qsz 32 notifyid 2 [ +0.000054] trusty-virtio trusty:virtio: initializing done [ +0.000091] trusty_ipc virtio0: is online [ +0.001305] usbcore: registered new interface driver snd-usb-audio [ +0.003461] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ +0.004449] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ +0.001721] snd_hda_codec_hdmi hdaudioC0D4: HDMI: invalid ELD data byte 35 [ +0.000157] snd_hda_codec_hdmi hdaudioC0D4: HDMI: invalid ELD data byte 0 [ +0.000002] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ +0.000520] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ +0.000123] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ +0.004193] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ +0.000099] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ +0.000665] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ +0.004121] gpio tegra-gpio wake71 for gpio=125(P:5) [ +0.000052] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ +0.007150] tegradc 15210000.nvdisplay: unblank [ +0.001221] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ +0.000124] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ +0.000463] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ +0.002967] Parent Clock set for DC plld2 [ +0.004901] tegradc 15210000.nvdisplay: hdmi: tmds rate:71000K prod-setting:prod_c_hdmi_54m_111m [ +0.001551] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ +0.000007] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ +0.016344] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ +0.015681] mmc0: periodic cache flush enabled [ +0.000015] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ +0.000514] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ +0.000158] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ +0.000219] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ +0.001938] OPE platform probe [ +0.000074] OPE platform probe successful [ +0.000653] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ +0.000528] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ +0.000002] Extcon AUX1(HDMI) enable [ +0.002934] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ +0.030464] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ +0.027229] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ +0.000079] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ +0.000071] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ +0.000064] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ +0.000067] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ +0.000073] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ +0.000085] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ +0.000070] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ +0.000066] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ +0.000067] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ +0.000098] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ +0.000073] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ +0.000069] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ +0.000067] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ +0.000064] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ +0.000091] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ +0.000068] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ +0.000068] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ +0.000068] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ +0.000070] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ +0.029989] u32 classifier [ +0.000003] Actions configured [ +0.000068] Initializing XFRM netlink socket [ +0.001970] NET: Registered protocol family 10 [ +0.001103] NET: Registered protocol family 17 [ +0.000011] NET: Registered protocol family 15 [ +0.000177] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ +0.000078] Bluetooth: RFCOMM socket layer initialized [ +0.000012] Bluetooth: RFCOMM ver 1.11 [ +0.000004] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ +0.000005] Bluetooth: HIDP socket layer initialized [ +0.000017] 9pnet: Installing 9P2000 support [ +0.000043] Key type dns_resolver registered [ +0.001042] Registered cp15_barrier emulation handler [ +0.001022] Registered setend emulation handler [ +0.008669] registered taskstats version 1 [ +0.004193] isp 15600000.isp: initialized [ +0.004858] nvcsi 150c0000.nvcsi: initialized [ +0.007058] tegra-vi4 15700000.vi: initialized [ +0.000312] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ +0.000080] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ +0.000061] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ +0.000103] input: gpio-keys as /devices/gpio-keys/input/input2 [ +0.000482] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ +0.000010] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ +0.022073] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ +0.009246] tegra_rtc c2a0000.rtc: setting system clock to 2021-03-23 05:13:54 UTC (1616476434) [ +0.001516] mmcblk mmc0:0001: Card claimed for testing. [ +0.022476] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ +0.000004] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 1-2: Product: USB2.0 Hub [ +0.000002] usb 1-2: Manufacturer: GenesysLogic [ +0.003536] hub 1-2:1.0: USB hub found [ +0.001046] hub 1-2:1.0: 4 ports detected [ +0.010674] bpmp: mounted debugfs mirror [ +0.002435] bwmgr: missing cdev-type property [ +0.000847] mmc1: Applying tuning correction [ +0.000028] mmc1: Tap value after applying correction 65 [ +0.000008] mmc1: hw tuning done ... [ +0.000110] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ +0.000636] ata1.00: ATA-11: WDC WDS100T2G0A-00JH30, 411040WD, max UDMA/133 [ +0.000003] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ +0.002700] ata1.00: configured for UDMA/133 [ +0.001136] spmic-ldo0: disabling [ +0.000186] spmic-ldo1: disabling [ +0.000220] en-vdd-sd: disabling [ +0.000002] vdd-usb0-5v: disabling [ +0.000002] vdd-usb1-5v: disabling [ +0.000002] vdd-3v3: disabling [ +0.000002] en-vdd-vcm-2v8: disabling [ +0.000002] vdd-sys-bl: disabling [ +0.000002] ALSA device list: [ +0.000003] #0: tegra-hda at 0x3518000 irq 385 [ +0.000002] #1: tegra-snd-t186ref-mobile-rt565x [ +0.002376] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ +0.006511] scsi 0:0:0:0: Direct-Access ATA WDC WDS100T2G0A- 40WD PQ: 0 ANSI: 5 [ +0.042663] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ +0.000134] sd 0:0:0:0: [sda] Write Protect is off [ +0.000003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ +0.000035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0.001680] sda: sda1 [ +0.000445] sd 0:0:0:0: [sda] Attached SCSI disk [ +0.183001] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ +0.046266] usb 1-2.4: new high-speed USB device number 3 using tegra-xusb [ +0.032492] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0610 [ +0.000004] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 1-2.4: Product: USB2.0 Hub [ +0.000002] usb 1-2.4: Manufacturer: GenesysLogic [ +0.001352] hub 1-2.4:1.0: USB hub found [ +0.001310] hub 1-2.4:1.0: 4 ports detected [ +0.140858] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ +0.064547] tegra_cec 3960000.tegra_cec: Sent res: -113. [ +0.000005] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ +0.095419] usb 1-2.4.2: new full-speed USB device number 4 using tegra-xusb [ +0.020898] usb 1-2.4.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 [ +0.000695] usb 1-2.4.2: New USB device found, idVendor=26ae, idProduct=8506 [ +0.000007] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000005] usb 1-2.4.2: Product: ChipOne Hid DFU Tool [ +0.000003] usb 1-2.4.2: Manufacturer: wch.cn [ +0.000420] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ +0.002028] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ +0.003184] input: wch.cn ChipOne Hid DFU Tool as /devices/3530000.xhci/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/0003:26AE:8506.0001/input/input3 [ +0.000273] hid-multitouch 0003:26AE:8506.0001: input,hidraw0: USB HID v1.01 Device [wch.cn ChipOne Hid DFU Tool] on usb-3530000.xhci-2.4.2/input0 [ +0.103312] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ +0.000006] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ +0.000004] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ +0.000003] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ +0.000006] pci_bus 0000:00: root bus resource [bus 00-ff] [ +0.000029] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400 [ +0.000103] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ +0.000126] iommu: Adding device 0000:00:01.0 to group 56 [ +0.000008] arm-smmu: forcing sodev map for 0000:00:01.0 [ +0.000072] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ +0.000178] pci 0000:01:00.0: [10ee:7024] type 00 class 0x070001 [ +0.000055] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ +0.000020] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ +0.000233] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot [ +0.000152] iommu: Adding device 0000:01:00.0 to group 57 [ +0.000004] arm-smmu: forcing sodev map for 0000:01:00.0 [ +0.008248] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ +0.000036] pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x402fffff] [ +0.000005] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x401fffff] [ +0.000011] pci 0000:01:00.0: BAR 1: assigned [mem 0x40200000-0x4020ffff] [ +0.000010] pci 0000:00:01.0: PCI bridge to [bus 01] [ +0.000008] pci 0000:00:01.0: bridge window [mem 0x40100000-0x402fffff] [ +0.000196] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ +0.000002] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ +0.000007] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ +0.000088] aer 0000:00:01.0:pcie002: service driver aer loaded [ +0.000214] serial 0000:01:00.0: enabling device (0000 -> 0002) [ +1.057791] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ +0.000003] Extcon HDMI: HPD enabled [ +0.000061] tegradc 15210000.nvdisplay: hdmi: plugged [ +0.001418] Freeing unused kernel memory: 8576K [ +0.033344] Root device found: mmcblk0p1 [ +0.001644] Found dev node: /dev/mmcblk0p1 [ +0.095440] EXT4-fs (mmcblk0p1): 14 orphan inodes deleted [ +0.000006] EXT4-fs (mmcblk0p1): recovery complete [ +0.005829] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ +0.001370] Rootfs mounted over mmcblk0p1 [ +0.025570] Switching from initrd to actual rootfs [ +0.125392] ip_tables: (C) 2000-2006 Netfilter Core Team [ +0.037573] cgroup: cgroup2: unknown option "nsdelegate" [ +0.022555] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ +0.002644] systemd[1]: Detected architecture arm64. [ +0.076477] systemd[1]: Set hostname to . [ +0.107971] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ +0.000021] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ +0.007492] systemd[1]: /lib/systemd/system/systemd-udevd.service:31: Unknown lvalue 'RestrictSUIDSGID' in section 'Service' [ +0.175205] random: systemd: uninitialized urandom read (16 bytes read) [ +0.000053] systemd[1]: Reached target Swap. [ +0.000371] random: systemd: uninitialized urandom read (16 bytes read) [ +0.000035] systemd[1]: Reached target User and Group Name Lookups. [ +0.000037] random: systemd: uninitialized urandom read (16 bytes read) [ +0.002915] systemd[1]: Created slice User and Session Slice. [ +0.006806] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ +0.052244] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ +0.020164] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ +0.117930] Wake76 for irq=199 [ +0.000006] Wake77 for irq=199 [ +0.000002] Wake78 for irq=199 [ +0.000002] Wake79 for irq=199 [ +0.000002] Wake80 for irq=199 [ +0.000002] Wake81 for irq=199 [ +0.000002] Wake82 for irq=199 [ +0.000034] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ +0.000006] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ +0.180560] systemd-journald[2385]: Received request to flush runtime journal from PID 1 [ +0.145032] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ +0.023791] usb 2-1: New USB device found, idVendor=05e3, idProduct=0616 [ +0.000009] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 2-1: Product: USB3.0 Hub [ +0.000003] usb 2-1: Manufacturer: GenesysLogic [ +0.001526] hub 2-1:1.0: USB hub found [ +0.000435] hub 2-1:1.0: 4 ports detected [ +0.272437] dhd_module_init in [ +0.000069] found wifi platform device bcmdhd_wlan [ +0.001689] wifi_platform_get_country_code_map: could not get country_code_map [ +0.000005] wifi_plat_dev_drv_probe:platform country code map is not available [ +0.000013] Power-up adapter 'DHD generic adapter' [ +0.000007] wifi_platform_set_power = 1 [ +0.015869] usb 2-1.1: new SuperSpeed USB device number 3 using tegra-xusb [ +0.020157] usb 2-1.1: LPM exit latency is zeroed, disabling LPM. [ +0.000694] usb 2-1.1: New USB device found, idVendor=2bdf, idProduct=0001 [ +0.000005] usb 2-1.1: New USB device strings: Mfr=5, Product=3, SerialNumber=6 [ +0.000004] usb 2-1.1: Product: MV-CA023-10UC [ +0.000003] usb 2-1.1: Manufacturer: Hikrobot [ +0.000003] usb 2-1.1: SerialNumber: 00E60476520 [ +0.002609] random: crng init done [ +0.003428] random: 7 urandom warning(s) missed due to ratelimiting [ +0.089049] usb 2-1.2: new SuperSpeed USB device number 4 using tegra-xusb [ +0.021732] usb 2-1.2: LPM exit latency is zeroed, disabling LPM. [ +0.003951] usb 2-1.2: New USB device found, idVendor=2bdf, idProduct=0001 [ +0.000006] usb 2-1.2: New USB device strings: Mfr=5, Product=3, SerialNumber=6 [ +0.000004] usb 2-1.2: Product: MV-CB060-10UC-C [ +0.000002] usb 2-1.2: Manufacturer: Hikvision [ +0.000003] usb 2-1.2: SerialNumber: 00D31338088 [ +0.049840] wifi_platform_bus_enumerate device present 1 [ +0.025359] wifi_platform_bus_enumerate device present 0 [ +0.000569] F1 signature read @0x18000000=0x17214354 [ +0.006958] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ +0.000727] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ +0.000088] wifi_platform_get_mac_addr [ +0.003016] usb 2-1.4: new SuperSpeed USB device number 5 using tegra-xusb [ +0.000583] ids dhd_log_netlink_init [ +0.003026] wl_create_event_handler(): thread:wl_event_handler:10b5 started [ +0.002351] dhd_attach(): thread:dhd_watchdog_thread:10bb started [ +0.000271] wl_event_handler : [ +0.000009] tsk Enter, tsk = 0xffffffc1d9441a90 [ +0.004087] dhd_attach(): thread:dhd_dpc:10bc started [ +0.000104] dhd_attach(): thread:dhd_rxf:10be started [ +0.000012] dhd_deferred_work_init: work queue initialized [ +0.000322] Dongle Host Driver, version 1.201.82 (r) Compiled from [ +0.000318] Register interface [wlan0] MAC: 48:b0:2d:0f:92:05 [ +0.000005] dhd_prot_ioctl : bus is down. we have nothing to do [ +0.000146] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ +0.002038] wifi_platform_set_power = 0 [ +0.010320] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0616 [ +0.000009] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 2-1.4: Product: USB3.0 Hub [ +0.000003] usb 2-1.4: Manufacturer: GenesysLogic [ +0.001571] hub 2-1.4:1.0: USB hub found [ +0.000434] hub 2-1.4:1.0: 4 ports detected [ +0.129692] usb 2-1.4: usb_suspend_both: status 0 [ +0.368970] EXT4-fs (sda1): recovery complete [ +0.000545] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ +0.741350] using random self ethernet address [ +0.000004] using random host ethernet address [ +0.007649] xdma: loading out-of-tree module taints kernel. [ +0.003315] xdma:xdma_mod_init: Xilinx XDMA Reference Driver xdma v2017.1.47 [ +0.000003] xdma:xdma_mod_init: desc_blen_max: 0xfffffff/268435455, sgdma_timeout: 10 sec. [ +0.000237] xdma:xdma_device_open: xdma device 0000:01:00.0, 0xffffffc1e51e9000. [ +0.000039] xdma:pci_check_extended_tag: 0xffffffc1e51e9000 EXT_TAG disabled. [ +0.000001] xdma:pci_check_extended_tag: pdev 0xffffffc1e51e9000, xdev 0xffffffc1e17e8000, config bar UNKNOWN. [ +0.000041] xdma:map_single_bar: BAR0: 1048576 bytes to be mapped----------------------->. [ +0.000098] xdma:is_config_bar: irq_id:0x0 [ +0.000002] xdma:is_config_bar: cfg_id:0x0 [ +0.000000] xdma:is_config_bar: BAR 0 is NOT the XDMA config BAR: 0x0, 0x0. [ +0.000001] xdma:map_single_bar: BAR1: 65536 bytes to be mapped----------------------->. [ +0.000020] xdma:is_config_bar: irq_id:0x1fc20000 [ +0.000001] xdma:is_config_bar: cfg_id:0x1fc30000 [ +0.000000] xdma:is_config_bar: BAR 1 is the XDMA config BAR [ +0.000002] xdma:map_bars: map_bars 2362 [ +0.000001] xdma:identify_bars: xdev 0xffffffc1e17e8000, bars 2, config at 1. [ +0.000002] xdma:identify_bars: identify_bars 2248 id:0 [ +0.000001] xdma:identify_bars: 2 BARs: config 1, user 0, bypass -1. [ +0.000011] xdma:probe_for_engine: found AXI H2C 0 engine, reg. off 0x0, id 0x1fc0,0x0. [ +0.000039] xdma:probe_for_engine: H2C 1 engine, reg off 0x100, id mismatch 0x0,0x0,exp 0x1fc0,0x1, SKIP. [ +0.000004] xdma:probe_for_engine: found AXI C2H 0 engine, reg. off 0x1000, id 0x1fc1,0x0. [ +0.000028] xdma:engine_alloc_resource: i:0 desc:ffffff800fdf0000 desc_bus_h:0 desc_bus_l:ffffb000 ret:ffffff800fdf2000 ret_h:0 ret_l:ffffa000 [ +0.000001] xdma:probe_for_engine: C2H 1 engine, reg off 0x1100, id mismatch 0x0,0x0,exp 0x1fc1,0x1, SKIP. [ +0.000019] xdma:enable_msi_msix: interrupt_mode:0 [ +0.000005] xdma:enable_msi_msix: PCI_CAP_ID_MSIX msiOffset:156 [ +0.000007] xdma:enable_msi_msix: next PCI_CAP_ID_MSIX ctrl:0x1e0011 [ +0.000005] xdma:enable_msi_msix: next PCI_CAP_ID_MSIX ctrl:0x1e0011 [ +0.000004] xdma:enable_msi_msix: next PCI_CAP_ID_MSIX table:0x8001 [ +0.000005] xdma:enable_msi_msix: next PCI_CAP_ID_MSIX pba:0x8fe1 [ +0.000018] xdma:enable_msi_msix: next PCI_CAP_ID_MSIX msiOffset:0 [ +0.000004] xdma:enable_msi_msix: PCI_CAP_ID_MSI msiOffset:0 [ +0.000004] xdma:enable_msi_msix: next PCI_CAP_ID_MSI ctrl:0x702410ee [ +0.000005] xdma:enable_msi_msix: next PCI_CAP_ID_MSIX table:0x100006 [ +0.000004] xdma:enable_msi_msix: next PCI_CAP_ID_MSI pba:0x7000100 [ +0.000018] xdma:enable_msi_msix: PCI_CAP_ID_MSI msiOffset:0 [ +0.000000] xdma:enable_msi_msix: Enabling MSI-X [ +0.000376] xdma:pci_keep_intx_enabled: 0000:01:00.0: clear INTX_DISABLE, 0x406 -> 0x6. [ +0.000023] xdma:irq_msix_channel_setup: engine 0-H2C0-ST, id[0]--->irq#460. [ +0.000012] xdma:irq_msix_channel_setup: engine 0-C2H0-ST, id[1]--->irq#461. [ +0.000012] xdma:irq_msix_user_setup: 0-USR-0, id[2]--->IRQ#462 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-1, id[3]--->IRQ#463 [ +0.000010] xdma:irq_msix_user_setup: 0-USR-2, id[4]--->IRQ#464 [ +0.000012] xdma:irq_msix_user_setup: 0-USR-3, id[5]--->IRQ#465 [ +0.000024] xdma:irq_msix_user_setup: 0-USR-4, id[6]--->IRQ#466 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-5, id[7]--->IRQ#467 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-6, id[8]--->IRQ#468 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-7, id[9]--->IRQ#469 [ +0.000010] xdma:irq_msix_user_setup: 0-USR-8, id[10]--->IRQ#470 [ +0.000012] xdma:irq_msix_user_setup: 0-USR-9, id[11]--->IRQ#471 [ +0.000010] xdma:irq_msix_user_setup: 0-USR-10, id[12]--->IRQ#472 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-11, id[13]--->IRQ#473 [ +0.000010] xdma:irq_msix_user_setup: 0-USR-12, id[14]--->IRQ#474 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-13, id[15]--->IRQ#475 [ +0.000010] xdma:irq_msix_user_setup: 0-USR-14, id[16]--->IRQ#476 [ +0.000011] xdma:irq_msix_user_setup: 0-USR-15, id[17]--->IRQ#477 [ +0.000005] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[0] = 0x00000000 [ +0.000003] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[1] = 0x00000000 [ +0.000004] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[2] = 0x00000000 [ +0.000004] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[3] = 0x00000000 [ +0.000003] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[4] = 0x00000000 [ +0.000004] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[5] = 0x00000000 [ +0.000003] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[6] = 0x00000000 [ +0.000004] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[7] = 0x00000000 [ +0.000001] xdma:prog_irq_msix_channel: prog_irq_msix_channel vector 0, 0x100. [ +0.000003] xdma:prog_irq_msix_channel: 0000:01:00.0 xdma0 channel_msi_vector[0] = 0x01000100 [ +0.000008] xdma:prog_irq_msix_user: prog_irq_msix_user vector 0, 0x5040302. [ +0.000001] xdma:prog_irq_msix_user: prog_irq_msix_user vector 1, 0x9080706. [ +0.000002] xdma:prog_irq_msix_user: prog_irq_msix_user vector 2, 0xd0c0b0a. [ +0.000001] xdma:prog_irq_msix_user: prog_irq_msix_user vector 3, 0x11100f0e. [ +0.000011] xdma:xdma_device_open: xdma_device_open, 4551 [ +0.000003] xdma:check_nonzero_interrupt_status: -------------------interrupt_regs----------------------------- [ +0.000000] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 identifier = 0x1fc20006 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_int_enable = 0x0000ffff [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_int_enable = 0x00000003 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_int_request = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_int_request = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_int_pending = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_int_pending = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[0] = 0x05040302 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[1] = 0x09080706 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[2] = 0x0d0c0b0a [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[3] = 0x11100f0e [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[4] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[5] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[6] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 user_msi_vector[7] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[0] = 0x01000100 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[1] = 0x01000100 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[2] = 0x01000100 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[3] = 0x01000100 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[4] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[5] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[6] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 channel_msi_vector[7] = 0x00000000 [ +0.000004] xdma:check_nonzero_interrupt_status: -------------------cfg_regs----------------------------- [ +0.000000] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 identifier = 0x1fc30006 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 BusDev = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 Max_Payload_Size = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 Max_Read_Request_Size = 0x00000002 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 System_ID = 0x00001234 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 MSI_Enable = 0x00000002 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 Data_Width = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 Control = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 AXI_User_Max_Payload_Size = 0x00000055 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 AXI_User_Max_Read_Request_Size = 0x00000055 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 Write_Flush_Timeout = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: -------------------common_regs----------------------------- [ +0.000000] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 identifier = 0x1fc60006 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 SGDMA_Descriptor_Control_Register = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 credit_mode_enable = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: -------------------vec_reg----------------------------- [ +0.000001] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[0] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[0] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[0] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[0] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[1] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[1] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[1] = 0x00000001 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[1] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[2] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[2] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[2] = 0x00000002 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[2] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[3] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[3] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[3] = 0x00000003 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[3] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[4] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[4] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[4] = 0x00000004 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[4] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[5] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[5] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[5] = 0x00000005 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[5] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[6] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[6] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[6] = 0x00000006 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[6] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[7] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[7] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[7] = 0x00000007 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[7] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[8] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[8] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[8] = 0x00000008 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[8] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[9] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[9] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[9] = 0x00000009 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[9] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[10] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[10] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[10] = 0x0000000a [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[10] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[11] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[11] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[11] = 0x0000000b [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[11] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[12] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[12] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[12] = 0x0000000c [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[12] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[13] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[13] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[13] = 0x0000000d [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[13] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[14] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[14] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[14] = 0x0000000e [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[14] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[15] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[15] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[15] = 0x0000000f [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[15] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[16] = 0xfffff000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[16] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[16] = 0x00000010 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[16] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[17] = 0xfffff000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[17] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[17] = 0x00000011 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[17] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[18] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[18] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[18] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[18] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[19] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[19] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[19] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[19] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[20] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[20] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[20] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[20] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[21] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[21] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[21] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[21] = 0x00000001 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[22] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[22] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[22] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[22] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[23] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[23] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[23] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[23] = 0x00000001 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[24] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[24] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[24] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[24] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[25] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[25] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[25] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[25] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[26] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[26] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[26] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[26] = 0x00000001 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[27] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[27] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[27] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[27] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[28] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[28] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[28] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[28] = 0x00000001 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[29] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[29] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[29] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[29] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[30] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[30] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[30] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[30] = 0x00000001 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_lo[31] = 0x00000000 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_addr_hi[31] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 msi_vec_data[31] = 0x00000000 [ +0.000003] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 ctrl[31] = 0x00000001 [ +0.000002] xdma:check_nonzero_interrupt_status: 0000:01:00.0 xdma0 Pending_Bit_Array = 0x00000000 [ +0.000007] xdma:probe_one: 0000:01:00.0 xdma0, pdev 0xffffffc1e51e9000, xdev 0xffffffc1d943e000, 0xffffffc1e17e8000, usr 16, ch 1,1. [ +0.014517] xdma:cdev_xvc_init: xcdev 0xffffffc1d943fa70, bar 0, offset 0x40000. [ +0.380038] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ +0.078793] gpio tegra-gpio wake18 for gpio=101(M:5) [ +0.005958] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ +0.008181] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ +0.000091] Dongle Host Driver, version 1.201.82 (r) Compiled from [ +0.000007] wl_android_wifi_on in [ +0.000004] wifi_platform_set_power = 1 [ +0.038944] Mass Storage Function, version: 2009/09/11 [ +0.000003] LUN: removable file: (no medium) [ +0.008619] using random self ethernet address [ +0.000002] using random host ethernet address [ +0.084089] zram: Added device: zram0 [ +0.000954] zram: Added device: zram1 [ +0.000520] zram: Added device: zram2 [ +0.000348] zram: Added device: zram3 [ +0.000332] zram: Added device: zram4 [ +0.000382] zram: Added device: zram5 [ +0.051324] zram0: detected capacity change from 0 to 686784512 [ +0.016989] Adding 670684k swap on /dev/zram0. Priority:5 extents:1 across:670684k SS [ +0.005964] vdd-1v8: voltage operation not allowed [ +0.000011] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.001725] zram1: detected capacity change from 0 to 686784512 [ +0.010545] Adding 670684k swap on /dev/zram1. Priority:5 extents:1 across:670684k SS [ +0.008395] vdd-1v8: voltage operation not allowed [ +0.000009] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.000108] zram2: detected capacity change from 0 to 686784512 [ +0.017316] Adding 670684k swap on /dev/zram2. Priority:5 extents:1 across:670684k SS [ +0.002586] zram3: detected capacity change from 0 to 686784512 [ +0.000649] vdd-1v8: voltage operation not allowed [ +0.000009] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.002392] vdd-1v8: voltage operation not allowed [ +0.000007] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.015471] Adding 670684k swap on /dev/zram3. Priority:5 extents:1 across:670684k SS [ +0.002645] zram4: detected capacity change from 0 to 686784512 [ +0.008290] Adding 670684k swap on /dev/zram4. Priority:5 extents:1 across:670684k SS [ +0.002584] zram5: detected capacity change from 0 to 686784512 [ +0.008709] Adding 670684k swap on /dev/zram5. Priority:5 extents:1 across:670684k SS [ +0.062089] vdd-1v8: voltage operation not allowed [ +0.000016] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.001068] vdd-1v8: voltage operation not allowed [ +0.000011] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.001523] vdd-1v8: voltage operation not allowed [ +0.000009] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.000024] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ +0.000939] F1 signature read @0x18000000=0x17214354 [ +0.007093] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ +0.000713] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ +0.103802] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ +0.062668] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ +0.000514] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ +0.000070] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ +0.000002] Enabling wake69 [ +0.001565] wifi_platform_get_mac_addr [ +0.002050] Firmware up: op_mode=0x0005, MAC=48:b0:2d:0f:92:05 [ +0.005241] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ +0.000071] Skipping the clm download. len:0 memblk: (null) [ +0.002826] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ +0.005882] Firmware version = wl0: May 17 2019 16:59:40 version 7.35.349.79 (r714996 CY) FWID 01-e527e2ad [ +0.002852] dhd_interworking_enable: failed to set WNM info, ret=-23 [ +0.051385] rndis0: HOST MAC 16:55:be:3e:5d:78 [ +0.002520] rndis0: MAC 16:55:be:3e:5d:79 [ +0.000445] usb0: HOST MAC 16:55:be:3e:5d:7a [ +0.000023] usb0: MAC 16:55:be:3e:5d:7b [ +0.000017] tegra-xudc-new 3550000.xudc: exiting ELPG [ +0.001728] tegra-xudc-new 3550000.xudc: exiting ELPG done [ +0.000017] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ +0.000026] tegra-xudc-new 3550000.xudc: entering ELPG [ +0.001179] tegra-xudc-new 3550000.xudc: entering ELPG done [ +0.000018] tegra-xudc-new 3550000.xudc: exiting ELPG [ +0.001752] tegra-xudc-new 3550000.xudc: exiting ELPG done [ +0.000020] tegra-xudc-new 3550000.xudc: entering ELPG [ +0.001101] tegra-xudc-new 3550000.xudc: entering ELPG done [ +0.021634] wl_android_wifi_off in [ +0.000973] dhd_wlfc_deinit():3472, maintain HOST RXRERODER flag in tvl [ +0.000374] dhdsdio_isr : bus is down. we have nothing to do [ +0.000024] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ +0.000002] Disabling wake69 [ +0.000072] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ +0.001038] wifi_platform_set_power = 0 [ +0.208082] l4tbr0: port 1(rndis0) entered blocking state [ +0.000003] l4tbr0: port 1(rndis0) entered disabled state [ +0.000178] device rndis0 entered promiscuous mode [ +0.009604] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ +0.007305] l4tbr0: port 2(usb0) entered blocking state [ +0.000002] l4tbr0: port 2(usb0) entered disabled state [ +0.000179] device usb0 entered promiscuous mode [ +0.008365] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [3月23 13:14] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ +0.045281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ +0.000107] Dongle Host Driver, version 1.201.82 (r) Compiled from [ +0.000008] wl_android_wifi_on in [ +0.000004] wifi_platform_set_power = 1 [ +0.215260] vdd-1v8: voltage operation not allowed [ +0.000010] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.020531] vdd-1v8: voltage operation not allowed [ +0.000010] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.020825] vdd-1v8: voltage operation not allowed [ +0.000010] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.002397] vdd-1v8: voltage operation not allowed [ +0.000008] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.117117] vdd-1v8: voltage operation not allowed [ +0.000027] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.001151] vdd-1v8: voltage operation not allowed [ +0.000023] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.001866] vdd-1v8: voltage operation not allowed [ +0.000018] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ +0.000098] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ +0.001942] F1 signature read @0x18000000=0x17214354 [ +0.014720] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ +0.002141] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ +0.213289] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ +0.063640] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ +0.000790] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ +0.000050] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ +0.000006] Enabling wake69 [ +0.002473] wifi_platform_get_mac_addr [ +0.002678] Firmware up: op_mode=0x0005, MAC=48:b0:2d:0f:92:05 [ +0.007183] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ +0.000053] Skipping the clm download. len:0 memblk: (null) [ +0.003442] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ +0.007497] Firmware version = wl0: May 17 2019 16:59:40 version 7.35.349.79 (r714996 CY) FWID 01-e527e2ad [ +0.004526] dhd_interworking_enable: failed to set WNM info, ret=-23 [ +0.128529] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ +0.000000] P2P interface registered [ +0.016408] WLC_E_IF: NO_IF set, event Ignored [ +0.018237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ +1.900719] tegradc 15210000.nvdisplay: blank - powerdown [ +0.062567] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ +0.000003] Extcon AUX1(HDMI) disable [ +0.022651] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ +0.000349] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ +0.000768] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ +0.000220] tegradc 15210000.nvdisplay: unblank [ +0.001435] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ +0.000368] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ +0.000098] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ +0.001474] Parent Clock set for DC plld2 [ +0.004219] tegradc 15210000.nvdisplay: hdmi: tmds rate:71000K prod-setting:prod_c_hdmi_54m_111m [ +0.001367] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ +0.000022] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ +0.035705] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ +0.000004] Extcon AUX1(HDMI) enable [ +0.000073] tegradc 15210000.nvdisplay: unblank [ +0.000014] tegradc 15220000.nvdisplay: blank - powerdown [ +1.107249] fuse init (API version 7.26) [ +7.735287] nvgpu: 17000000.gp10b railgate_enable_store:297 [INFO] railgate is disabled. [ +1.247793] xdma:xdma_H2C_transfer_source_init: transfer addr: ffffffc1e14ab018 &transfer->wq:ffffffc1e14ab048 [ +0.000006] xdma:engine_start: H2C SGDMA REG iowrite32(0xffffe000 to 0xffffff8010814080) (first_desc_lo) [ +0.000002] xdma:engine_start: H2C SGDMA REG iowrite32(0x00000000 to 0xffffff8010814084) (first_desc_hi) [ +0.000002] xdma:engine_start: H2C SGDMA REG iowrite32(0x0000000f to 0xffffff8010814088) (first_desc_adjacent) [ +0.000002] xdma:engine_start: ioread32(0xffffff8010810040) (dummy read flushes writes). [ +0.000003] xdma:engine_start: 0-H2C0-ST engine 0xffffffc1e17e8540 now running [ +0.260741] usb 2-1.2: usbfs: process 7397 (MedicalScanner) did not claim interface 2 before use [ +0.517577] usb 2-1.1: usbfs: process 7397 (MedicalScanner) did not claim interface 2 before use [0000.173] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-7d3edb9d) [0000.182] I> bit @ 0xd480000 [0000.185] I> Boot-device: eMMC [0000.192] I> sdmmc bdev is already initialized [0000.197] I> pmic: reset reason (nverc) : 0x0 [0000.228] I> Found 18 partitions in SDMMC_BOOT (instance 3) [0000.247] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.253] W> No valid slot number is found in scratch register [0000.259] W> Return default slot: _a [0000.262] I> A/B: bin_type (16) slot 0 [0000.266] I> Loading partition bpmp-fw at 0xd7800000 [0000.271] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.276] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.301] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.306] W> No valid slot number is found in scratch register [0000.312] W> Return default slot: _a [0000.315] I> A/B: bin_type (17) slot 0 [0000.319] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.324] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.330] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.353] I> Binary(17) of size 466112 is loaded @ 0xd798e000 [0000.532] I> Loading SCE-FW ... [0000.535] W> No valid slot number is found in scratch register [0000.541] W> Return default slot: _a [0000.544] I> A/B: bin_type (12) slot 0 [0000.548] I> Loading partition sce-fw at 0xd7300000 [0000.553] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.558] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.577] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.583] I> Init SCE [0000.585] I> Loading APE-FW ... [0000.588] W> No valid slot number is found in scratch register [0000.594] W> Return default slot: _a [0000.597] I> A/B: bin_type (11) slot 0 [0000.601] I> Loading partition adsp-fw at 0xd7400000 [0000.606] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.611] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.630] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.636] I> Copy BTCM section [0000.639] W> No valid slot number is found in scratch register [0000.645] W> Return default slot: _a [0000.648] I> A/B: bin_type (13) slot 0 [0000.652] I> Loading partition cpu-bootloader at 0x96000000 [0000.658] I> Reading two headers - addr:0x96000000 blocks:1 [0000.663] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.684] I> Binary(13) of size 283728 is loaded @ 0x96000000 [0000.690] W> No valid slot number is found in scratch register [0000.695] W> Return default slot: _a [0000.699] I> A/B: bin_type (20) slot 0 [0000.702] I> Loading partition bootloader-dtb at 0x8520f400 [0000.708] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.713] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.735] I> Binary(20) of size 371248 is loaded @ 0x8520f400 [0000.741] W> No valid slot number is found in scratch register [0000.746] W> Return default slot: _a [0000.750] I> A/B: bin_type (14) slot 0 [0000.753] I> Loading partition secure-os at 0x8530f600 [0000.758] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.764] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.785] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.793] I> TOS boot-params @ 0x85000000 [0000.797] I> TOS params prepared [0000.800] I> Loading EKS ... [0000.802] I> A/B: bin_type (15) slot 0 [0000.806] I> Loading partition eks at 0x8590f800 [0000.811] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.816] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.835] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.840] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.845] I> Copied encrypted keys [0000.849] I> boot profiler @ 0x275844000 [0000.853] I> boot profiler for TOS @ 0x275844000 [0000.858] I> Unhalting SCE [0000.860] I> Primary Memory Start:80000000 Size:70000000 [0000.866] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.872] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):23b153a63 NOTICE: BL31: Built : 22:43:09, Dec 9 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.233] I> Welcome to Cboot [0001.236] I> Cboot Version: t186-c3c778fb [0001.240] I> CPU-BL Params @ 0x275800000 [0001.244] I> 0) Base:0x00000000 Size:0x00000000 [0001.248] I> 1) Base:0x277f00000 Size:0x00100000 [0001.253] I> 2) Base:0x277e00000 Size:0x00100000 [0001.257] I> 3) Base:0x277d00000 Size:0x00100000 [0001.262] I> 4) Base:0x277c00000 Size:0x00100000 [0001.266] I> 5) Base:0x277b00000 Size:0x00100000 [0001.271] I> 6) Base:0x277800000 Size:0x00200000 [0001.275] I> 7) Base:0x277400000 Size:0x00400000 [0001.280] I> 8) Base:0x277a00000 Size:0x00100000 [0001.284] I> 9) Base:0x277300000 Size:0x00100000 [0001.289] I> 10) Base:0x276800000 Size:0x00800000 [0001.293] I> 11) Base:0x30000000 Size:0x00040000 [0001.298] I> 12) Base:0xf0000000 Size:0x00100000 [0001.302] I> 13) Base:0x30040000 Size:0x00001000 [0001.307] I> 14) Base:0x30048000 Size:0x00001000 [0001.311] I> 15) Base:0x30049000 Size:0x00001000 [0001.315] I> 16) Base:0x3004a000 Size:0x00001000 [0001.320] I> 17) Base:0x3004b000 Size:0x00001000 [0001.324] I> 18) Base:0x3004c000 Size:0x00001000 [0001.329] I> 19) Base:0x3004d000 Size:0x00001000 [0001.333] I> 20) Base:0x3004e000 Size:0x00001000 [0001.338] I> 21) Base:0x3004f000 Size:0x00001000 [0001.342] I> 22) Base:0x00000000 Size:0x00000000 [0001.346] I> 23) Base:0xf0100000 Size:0x00010000 [0001.351] I> 24) Base:0x00000000 Size:0x00000000 [0001.355] I> 25) Base:0x00000000 Size:0x00000000 [0001.360] I> 26) Base:0x00000000 Size:0x00000000 [0001.364] I> 27) Base:0x00000000 Size:0x00000000 [0001.369] I> 28) Base:0x84400000 Size:0x00400000 [0001.373] I> 29) Base:0x30000000 Size:0x00010000 [0001.378] I> 30) Base:0x278000000 Size:0x08000000 [0001.382] I> 31) Base:0x00000000 Size:0x00000000 [0001.386] I> 32) Base:0x276000000 Size:0x00600000 [0001.391] I> 33) Base:0x80000000 Size:0x70000000 [0001.395] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.400] I> 35) Base:0x00000000 Size:0x00000000 [0001.404] I> 36) Base:0x00000000 Size:0x00000000 [0001.409] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.413] I> 38) Base:0x84000000 Size:0x00400000 [0001.418] I> 39) Base:0x96000000 Size:0x02000000 [0001.422] I> 40) Base:0x85000000 Size:0x01200000 [0001.427] I> 41) Base:0x275800000 Size:0x00500000 [0001.431] I> 42) Base:0x00000000 Size:0x00000000 [0001.436] I> 43) Base:0x00000000 Size:0x00000000 [0001.440] GIC-SPI Target CPU: 4 [0001.443] Interrupts Init done [0001.446] calling constructors [0001.450] initializing heap [0001.452] initializing threads [0001.456] initializing timers [0001.459] creating bootstrap completion thread [0001.463] top of bootstrap2() [0001.466] CPU: ARM Cortex A57 [0001.470] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.475] initializing platform [0001.478] I> Bl_dtb @0x8520f400 [0001.481] I> gpio framework initialized [0001.487] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.497] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.505] I> GPIO framework and drivers are initialized. [0001.510] I> Boot-device: eMMC [0001.517] I> sdmmc bdev is already initialized [0001.548] I> Found 18 partitions in SDMMC_BOOT (instance 3) [0001.565] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.571] W> opt-in fuse is not set, skip fuse_burning [0001.576] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.582] W> No valid slot number is found in scratch register [0001.587] W> Return default slot: _a [0001.591] I> A/B: bin_type (21) slot 0 [0001.594] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.611] I> Kernel_dtb @0x80000000 [0001.614] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.622] E> I2C: slave not found in slaves. [0001.627] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.634] E> I2C_DEV: Failed to send register address 0x00000004. [0001.640] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.649] E> tca9539_device_init: failed to write polar reg [0001.655] E> tegrabl_tca9539_init: failed to init device! [0001.660] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.667] E> I2C: slave not found in slaves. [0001.671] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.679] E> I2C_DEV: Failed to send register address 0x00000004. [0001.685] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.694] E> tca9539_device_init: failed to write polar reg [0001.699] E> tegrabl_tca9539_init: failed to init device! [0001.707] I> fixed regulator driver initialized [0001.740] I> register 'maxim' power off handle [0001.746] I> virtual i2c enabled [0001.749] I> registered 'maxim,max77620' pmic [0001.754] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.767] I> Find /i2c@c250000's alias i2c7 [0001.771] I> Reading eeprom i2c=7 address=0x50 [0001.800] I> Device at /i2c@c250000:0x50 [0001.804] I> Reading eeprom i2c=7 address=0x57 [0001.809] E> I2C: slave not found in slaves. [0001.813] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.820] E> I2C_DEV: Failed to send register address 0x00000000. [0001.826] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.836] E> eeprom: Failed to read I2C slave device [0001.841] I> Eeprom read failed 0x3526070d [0001.845] I> Find /i2c@c240000's alias i2c1 [0001.849] I> Reading eeprom i2c=1 address=0x51 [0001.854] E> I2C: slave not found in slaves. [0001.858] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.866] E> I2C_DEV: Failed to send register address 0x00000000. [0001.872] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.881] E> eeprom: Retry to read I2C slave device. [0001.886] E> I2C: slave not found in slaves. [0001.890] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.898] E> I2C_DEV: Failed to send register address 0x00000000. [0001.904] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.914] E> eeprom: Failed to read I2C slave device [0001.918] I> Eeprom read failed 0x3526070d [0001.923] I> Find /i2c@3160000's alias i2c0 [0001.927] I> Reading eeprom i2c=0 address=0x50 [0001.931] E> I2C: slave not found in slaves. [0001.935] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.943] E> I2C_DEV: Failed to send register address 0x00000000. [0001.949] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.958] E> eeprom: Failed to read I2C slave device [0001.963] I> Eeprom read failed 0x3526070d [0001.968] I> Find /i2c@3180000's alias i2c2 [0001.972] I> Reading eeprom i2c=2 address=0x54 [0001.976] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.981] C> GPIO driver for chip_id 0x2 could not be found [0001.986] E> cam_eeprom_read: Can't get gpio driver [0001.991] I> Eeprom read failed 0x4d4d000d [0001.995] I> Reading eeprom i2c=2 address=0x57 [0001.999] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.004] C> GPIO driver for chip_id 0x2 could not be found [0002.009] E> cam_eeprom_read: Can't get gpio driver [0002.014] I> Eeprom read failed 0x4d4d000d [0002.018] I> create_pm_ids: id: 3310-1000-D00-M, len: 15 [0002.023] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.058] I> enabling 'vdd-hdmi' regulator [0002.062] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.081] E> invalid display type [0002.086] E> cannot find any other nvdisp nodes [0002.091] E> no valid display unit config found in dtb [0002.096] W> display init failed [0002.100] initializing target [0002.103] calling apps_init() [0002.106] starting app kernel_boot_app [0002.128] I> found decompressor handler: lz4-legacy [0002.133] I> decompressing BMP blob ... [0002.143] I> Kernel type = Normal [0002.146] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.160] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.167] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.174] I> ########## Fixed storage boot ########## [0002.179] I> Loading kernel from partition ... [0002.183] W> No valid slot number is found in scratch register [0002.189] W> Return default slot: _a [0002.192] I> A/B: bin_type (24) slot 0 [0002.208] I> Boot image size read from image header: f2f08 [0002.213] I> Boot image load address: 0x0x80400000 [0002.218] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.160] I> Validate kernel ... [0003.163] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.171] I> kernel-dtb is already loaded [0003.175] I> Validate kernel-dtb ... [0003.178] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.186] I> Checking boot.img header magic ... [0003.190] I> [OK] [0003.192] I> Kernel hdr @0x80400000 [0003.195] I> Kernel dtb @0x80000000 [0003.198] I> decompressor handler not found [0003.202] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80800000 ... [0003.210] I> Done [0003.212] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0003.219] I> Updated bpmp info to DTB [0003.225] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0003.229] I> Updated initrd info to DTB [0003.233] W> WARN: Fail to override "console=none" in commandline [0003.239] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.246] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.253] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.261] I> disabled_core_mask: 0xffffff0c [0003.265] W> No valid slot number is found in scratch register [0003.270] W> Return default slot: _a [0003.274] I> Active slot suffix: [0003.277] I> add_boot_slot_suffix: slot_suffix = [0003.281] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.318] I> Updated bootarg info to DTB [0003.321] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:0f:92:05 [0003.328] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:0f:92:06 [0003.334] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:0f:92:07 [0003.340] E> Found no plugin manager ids in source DT [0003.345] W> Add plugin manager ids from board info [0003.350] E> "plugin-manager" doesn't exist, creating [0003.355] E> "ids" doesn't exist, creating [0003.359] E> "connection" doesn't exist, creating [0003.363] E> "configs" doesn't exist, creating [0003.368] I> create_pm_ids: id: 3310-1000-D00-M, len: 15 [0003.373] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.384] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.391] E> "i2c@c250000" doesn't exist, creating [0003.396] E> "module@0x50" doesn't exist, creating [0003.402] I> Adding plugin-manager/ids/3310-1000-D00-M [0003.409] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.415] I> Adding plugin-manager/configs/3310-power-config 00 [0003.421] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.427] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.433] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.439] I> Adding plugin-manager/configs/3310-display-config 00 [0003.445] I> Adding plugin-manager/cvm [0003.449] E> "chip-id" doesn't exist, creating [0003.453] I> Adding plugin-manager/chip-id/A02P [0003.458] E> "odm-data" doesn't exist, creating [0003.462] I> Adding /chosen/plugin-manager/odm-data [0003.472] I> added [base:0x80000000, size:0x70000000] to /memory [0003.478] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.484] I> added [base:0x275e00000, size:0x200000] to /memory [0003.490] I> added [base:0x276600000, size:0x200000] to /memory [0003.495] I> added [base:0x277000000, size:0x200000] to /memory [0003.501] I> Updated memory info to DTB [0003.506] E> add_disp_param: failed to get display params for du=0 [0003.513] E> "reset" doesn't exist, creating [0003.517] E> "pmc-reset-reason" doesn't exist, creating [0003.523] E> "pmic-reset-reason" doesn't exist, creating [0003.529] I> Adding ecid(00000001647057071000000018ff8280) to DT [0003.535] I> disabled_core_mask: 0xffffff0c [0003.548] I> Add serial number:1422820077820 as DT property [0003.557] I> Plugin-manager override starting [0003.563] I> node /plugin-manager/fragement@0 matches [0003.573] I> node /plugin-manager/fragement@4 matches [0003.586] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.606] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.615] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.624] I> node /plugin-manager/fragment-devslp@0 matches [0003.636] I> node /plugin-manager/fragment-500-pcie-config matches [0003.651] I> node /plugin-manager/fragment-500-xusb-config matches [0003.673] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.687] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.698] I> node /plugin-manager/fragment-p3310-c01 matches [0003.710] I> node /plugin-manager/fragment-p3310-c03 matches [0003.749] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.775] I> Disable plugin-manager status in FDT [0003.780] I> Plugin-manager override finished successfully [0003.785] I> tegrabl_load_kernel_and_dtb: Done [0003.789] E> tegrabl_display_clear: display is not initialized [0003.795] W> Boot logo display failed... [0003.799] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-g0536cf2a27 (Dec 09 2019 - 22:43:10 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 870 bytes read in 75 ms (10.7 KiB/s) L4T boot options 1: primary kernel 2: primary kernel patch Enter choice: 2: primary kernel patch Retrieving file: /boot/initrd 5565140 bytes read in 267 ms (19.9 MiB/s) Retrieving file: /boot/Image_patch 34519048 bytes read in 930 ms (35.4 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008005f9cf Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (opt@opt-desktop) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #3 SMP PREEMPT Fri Oct 23 15:02:38 CST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.552138] pca953x 0-0074: failed reading register [ 0.552773] pca953x 0-0077: failed reading register [ 1.176459] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 1.411838] FAN: coudln't get the regulator [ 1.448150] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.448583] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 3.925232] cgroup: cgroup2: unknown option "nsdelegate" [ 5.278106] random: crng init done [ 5.281533] random: 7 urandom warning(s) missed due to ratelimiting [ 6.547950] xdma: loading out-of-tree module taints kernel. [ 6.756712] using random self ethernet address [ 6.756714] using random host ethernet address [ 7.129313] using random self ethernet address [ 7.129316] using random host ethernet address [ 7.569038] vdd-1v8: voltage operation not allowed [ 7.569046] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.589263] vdd-1v8: voltage operation not allowed [ 7.589275] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.610107] vdd-1v8: voltage operation not allowed [ 7.610118] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.612504] vdd-1v8: voltage operation not allowed [ 7.612511] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.719348] vdd-1v8: voltage operation not allowed [ 7.719369] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.720397] vdd-1v8: voltage operation not allowed [ 7.720409] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.722184] vdd-1v8: voltage operation not allowed [ 7.722196] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.800743] vdd-1v8: voltage operation not allowed [ 8.800753] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.821284] vdd-1v8: voltage operation not allowed [ 8.821294] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.842123] vdd-1v8: voltage operation not allowed [ 8.842132] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.844631] vdd-1v8: voltage operation not allowed [ 8.844639] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.953055] vdd-1v8: voltage operation not allowed [ 8.953177] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.954067] vdd-1v8: voltage operation not allowed [ 8.954073] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.955575] vdd-1v8: voltage operation not allowed [ 8.955581] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.3 LTS opt-desktop ttyS0 opt-desktop login: [ 22.603574] usb 2-1.2: usbfs: process 7409 (MedicalScanner) did not claim interface 2 before use [ 23.176445] usb 2-1.1: usbfs: process 7409 (MedicalScanner) did not claim interface 2 before use [ 83.815811] blk_update_request: I/O error, dev loop1, sector 0 [END] 21/3/23 14:46:41