Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB3, 10:02:04 Press CTRL-A Z for help on special keys �� [0000.085] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.093] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.098] I> Boot-mode: Coldboot [0000.101] I> Chip revision : A02P [0000.104] I> Bootrom patch version : 15 (correctly patched) [0000.110] I> ATE fuse revision : 0x200 [0000.113] I> Ram repair fuse : 0x0 [0000.116] I> Ram Code : 0x2 [0000.119] I> rst_source : 0x0 [0000.121] I> rst_level : 0x0 [0000.125] I> Boot-device: eMMC [0000.140] I> sdmmc DDR50 mode [0000.144] W> No valid slot number is found in scratch register [0000.149] W> Return default slot: _a [0000.153] I> Active Boot chain : 0 [0000.156] I> Boot-device: eMMC [0000.160] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.167] I> Temperature = 25000 [0000.170] W> Skipping boost for clk: BPMP_CPU_NIC [0000.175] W> Skipping boost for clk: BPMP_APB [0000.179] W> Skipping boost for clk: AXI_CBB [0000.183] W> Skipping boost for clk: AON_CPU_NIC [0000.187] W> Skipping boost for clk: CAN1 [0000.191] W> Skipping boost for clk: CAN2 [0000.195] I> Boot-device: eMMC [0000.198] I> Boot-device: eMMC [0000.207] I> Sdmmc: HS400 mode enabled [0000.212] I> ECC region[0]: Start:0x0, End:0x0 [0000.216] I> ECC region[1]: Start:0x0, End:0x0 [0000.220] I> ECC region[2]: Start:0x0, End:0x0 [0000.224] I> ECC region[3]: Start:0x0, End:0x0 [0000.228] I> ECC region[4]: Start:0x0, End:0x0 [0000.232] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.238] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.242] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.247] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.251] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.257] E> FAILED: Thermal config [0000.264] E> FAILED: MEMIO rail config [0000.283] I> Boot-device: eMMC [0000.292] I> sdmmc bdev is already initialized [0000.365] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.373] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.374] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.375] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.375] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.381] W> device prod register failed [0000.385] I> Boot-device: eMMC [0000.388] I> Boot_device: SDMMC_BOOT instance: 3 [0000.394] I> sdmmc-3 params source = boot args [0000.397] I> sdmmc bdev is already initialized [0000.401] I> sdmmc-3 params source = boot args [0000.409] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.416] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.417] W> No valid slot number is found in scratch register [0000.422] W> Return default slot: _a [0000.425] I> Active Boot chain : 0 [0000.429] I> parsing oem signed section of bpmp-fw header done [0000.434] I> bpmp-fw binary init read from storage [0000.439] I> oem authentication of bpmp-fw header done [0000.446] I> bpmp-fw binary done read from storage [0000.448] I> bpmp-fw: Authentication init Done [0000.453] I> parsing oem signed section of cpubl header done [0000.458] I> cpubl binary init read from storage [0000.463] I> bpmp-fw: Authentication Finalize Done [0000.468] I> oem authentication of cpubl header done [0000.472] I> cpubl binary done read from storage [0000.477] I> cpubl: Authentication init Done [0000.482] I> parsing oem signed section of rce header done [0000.486] I> rce binary init read from storage [0000.491] I> Relocating BR-BCT [0000.493] I> cpubl: Authentication Finalize Done [0000.498] I> oem authentication of rce header done [0000.502] I> rce binary done read from storage [0000.507] I> rce: Authentication init Done [0000.511] I> parsing oem signed section of ape header done [0000.516] I> ape binary init read from storage [0000.520] I> rce: Authentication Finalize Done [0000.525] I> oem authentication of ape header done [0000.529] I> ape binary done read from storage [0000.533] I> ape: Authentication init Done [0000.538] I> parsing oem signed section of tos header done [0000.543] I> tos binary init read from storage [0000.547] I> ape: Authentication Finalize Done [0000.552] I> oem authentication of tos header done [0000.556] I> tos binary done read from storage [0000.560] I> tos: Authentication init Done [0000.564] I> parsing oem signed section of bpmp-fw-dtb header done [0000.570] I> bpmp-fw-dtb binary init read from storage [0000.575] I> tos: Authentication Finalize Done [0000.581] I> oem authentication of bpmp-fw-dtb header done [0000.588] I> bpmp-fw-dtb binary done read from storage [0000.590] I> bpmp-fw-dtb: Authentication init Done [0000.595] I> parsing oem signed section of cpubl-dtb header done [0000.600] I> cpubl-dtb binary init read from storage [0000.605] I> bpmp-fw-dtb: Authentication Finalize Done [0000.643] I> oem authentication of cpubl-dtb header done [0000.644] I> cpubl-dtb binary done read from storage [0000.644] I> cpubl-dtb: Authentication init Done [0000.646] I> parsing oem signed section of eks header done [0000.647] I> eks binary init read from storage [0000.647] I> cpubl-dtb: Authentication Finalize Done [0000.648] I> oem authentication of eks header done [0000.652] I> eks binary done read from storage [0000.656] I> eks: Authentication init Done [0000.660] I> eks: Authentication Finalize Done [0000.664] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized �� [0001.168] I> Welcome to Cboot��mrq initialized fmon_post initialized �� [0001.169] I> Cboot Version: t194-cfa2bc91 [0001.169] I> CPU-BL Params @ 0xf2820000 [0001.169] I> 0) Base:0x00000000 Size:0x00000000 [0001.173] I> 1) Base:0xf1100000 Size:0x00100000 [0001.177] I> 2) Base:0xf2000000 Size:0x00200000 [0001.182] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.186] I> 4) Base:0xf1000000 Size:0x00100000 [0001.266] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.270] I> 6) Base:0xf3800000 Size:0x00400000 [0001.275] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.279] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.284] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.288] I> 10) Base:0xf3000000 Size:0x00800000 [0001.292] I> 11) Base:0x40000000 Size:0x00040000 [0001.297] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.301] I> 13) Base:0x40046000 Size:0x00002000 [0001.306] I> 14) Base:0x40048000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� [0001.315] I> 15) Base:0xac000000 Size:0x00004000��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] �� [0001.366] I> 16) Base:0x4004a000 Size:0x00002000 [0001.370] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.374] I> 18) Base:0x4004c000 Size:0x00002000 [0001.379] I> 19) Base:0xf2200000 Size:0x00600000 [0001.383] I> 20) Base:0x4004e000 Size:0x00002000 [0001.388] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.392] I> 22) Base:0x00000000 Size:0x00000000 [0001.397] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.401] I> 24) Base:0xf6000000 Size:0x02000000 [0001.406] I> 25) Base:0x40050000 Size:0x00002000 [0001.410] I> 26) Base:0x40040000 Size:0x00006000 [0001.415] I> 27) Base:0xf1800000 Size:0x00400000 [0001.419] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.424] I> 29) Base:0xf1400000 Size:0x00400000 [0001.428] I> 30) Base:0x00000000 Size:0x00000000 [0001.432] I> 31) Base:0x00000000 Size:0x00000000 [0001.437] I> 32) Base:0xf8000000 Size:0x08000000 [0001.441] I> 33) Base:0x00000000 Size:0x00000000 [0001.446] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.450] I> 35) Base:0xab000000 Size:0x01000000 [0001.455] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.459] I> 37) Base:0xf2800000 Size:0x00800000 [0001.464] I> 38) Base:0x80000000 Size:0x20000000 [0001.468] I> 39) Base:0xb0000000 Size:0x08000000 [0001.473] I> 40) Base:0x00000000 Size:0x00000000 [0001.477] I> 41) Base:0x00000000 Size:0x00000000 [0001.482] I> 42) Base:0x00000000 Size:0x00000000 [0001.486] I> 43) Base:0x00000000 Size:0x00000000 [0001.491] I> 44) Base:0x00000000 Size:0x00000000 [0001.495] I> 45) Base:0x00000000 Size:0x00000000 [0001.499] GIC-SPI Target CPU: 0 [0001.502] Interrupts Init done [0001.505] calling constructors [0001.508] initializing heap [0001.511] I> Heap: [0xa0699b80 ... 0xab000000] [0001.515] initializing threads [0001.518] initializing timers [0001.521] creating bootstrap completion thread [0001.525] top of bootstrap2() [0001.528] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.533] initializing platform [0001.535] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.541] W> device prod register failed [0001.545] I> Bl_dtb @0xaaf00000 [0001.551] W> "plugin-manager" doesn't exist, creating [0001.553] W> "ids" doesn't exist, creating [0001.557] W> "connection" doesn't exist, creating [0001.561] W> "configs" doesn't exist, creating [0001.578] E> failed to read label property for node 227172: 13 [0001.580] E> failed to read reg property for node 227260: 13 [0001.583] E> failed to read label property for node 227312: 13 [0001.586] E> failed to read label property for node 227380: 13 [0001.590] E> failed to read label property for node 227416: 13 [0001.595] E> failed to read label property for node 227452: 13 [0001.600] E> failed to read reg property for node 227520: 13 [0001.606] E> failed to read label property for node 227572: 13 [0001.613] I> Find /i2c@3160000's alias i2c0 [0001.615] I> Reading eeprom i2c=0 address=0x50 [0001.644] I> Device at /i2c@3160000:0x50 [0001.644] I> Reading eeprom i2c=0 address=0x56 [0001.669] I> Device at /i2c@3160000:0x56 [0001.671] I> Find /i2c@3180000's alias i2c2 [0001.671] I> Reading eeprom i2c=2 address=0x54 [0001.673] E> I2C: slave not found in slaves. [0001.673] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.674] E> I2C_DEV: Failed to send register address 0x00000000. [0001.674] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.683] E> eeprom: Failed to read I2C slave device [0001.688] I> Eeprom read failed 0x3526070d [0001.692] I> Reading eeprom i2c=2 address=0x57 [0001.696] E> I2C: slave not found in slaves. [0001.700] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.708] E> I2C_DEV: Failed to send register address 0x00000000. [0001.713] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.723] E> eeprom: Failed to read I2C slave device [0001.728] I> Eeprom read failed 0x3526070d [0001.732] I> Reading eeprom i2c=2 address=0x52 [0001.736] E> I2C: slave not found in slaves. [0001.740] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.748] E> I2C_DEV: Failed to send register address 0x00000000. [0001.754] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.763] E> eeprom: Failed to read I2C slave device [0001.768] I> Eeprom read failed 0x3526070d [0001.773] I> Find /i2c@c240000's alias i2c1 [0001.776] I> Reading eeprom i2c=1 address=0x52 [0001.781] E> I2C: slave not found in slaves. [0001.784] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.792] E> I2C_DEV: Failed to send register address 0x00000000. [0001.798] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.807] E> eeprom: Retry to read I2C slave device. [0001.812] E> I2C: slave not found in slaves. [0001.816] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.824] E> I2C_DEV: Failed to send register address 0x00000000. [0001.829] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.839] E> eeprom: Failed to read I2C slave device [0001.844] I> Eeprom read failed 0x3526070d [0001.848] I> Reading eeprom i2c=1 address=0x50 [0001.852] E> I2C: slave not found in slaves. [0001.856] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.864] E> I2C_DEV: Failed to send register address 0x00000000. [0001.870] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.879] E> eeprom: Retry to read I2C slave device. [0001.884] E> I2C: slave not found in slaves. [0001.888] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.896] E> I2C_DEV: Failed to send register address 0x00000000. [0001.901] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.911] E> eeprom: Failed to read I2C slave device [0001.916] I> Eeprom read failed 0x3526070d [0001.920] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0001.925] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 3 [0001.936] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0001.941] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 3 [0001.952] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.960] W> "i2c@3160000" doesn't exist, creating [0001.964] W> "module@0x50" doesn't exist, creating [0001.969] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.976] W> "module@0x56" doesn't exist, creating [0001.982] I> Adding plugin-manager/cvm [0001.984] W> "chip-id" doesn't exist, creating [0001.988] I> Adding plugin-manager/chip-id/A02P [0001.992] I> Plugin-manager override starting [0001.997] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.007] I> node /plugin-manager/fragement-soft-wdt matches [0002.015] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.020] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.030] I> Disable plugin-manager status in FDT [0002.031] I> Plugin-manager override finished successfully [0002.031] I> gpio framework initialized [0002.034] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.042] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.048] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.056] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.063] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.070] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.076] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.083] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.091] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.098] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.105] I> fixed regulator driver initialized [0002.118] I> register 'maxim' power off handle [0002.119] I> virtual i2c enabled [0002.119] I> registered 'maxim,max20024' pmic [0002.120] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.126] I> Boot-device: eMMC [0002.129] I> Boot_device: SDMMC_BOOT instance: 3 [0002.138] I> sdmmc-3 params source = boot args [0002.138] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.143] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 3 [0002.154] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0002.159] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 3 [0002.170] I> sdmmc bdev is already initialized [0002.175] I> sdmmc-3 params source = boot args [0002.205] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.218] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.229] I> enabling 'vdd-hdmi-5v0' regulator [0002.236] I> regulator 'vdd-hdmi-5v0' already enabled [0002.237] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.237] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.242] E> invalid display type [0002.248] E> invalid display type [0002.249] E> cannot find any other nvdisp nodes [0002.249] E> no valid display unit config found in dtb [0002.251] W> display init failed [0002.251] I> Load in CBoot Boot Options partition and parse it [0002.259] E> Error -9 when finding node with path /boot-configuration [0002.260] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.267] I> Using default boot order [0002.270] I> boot-dev-order :- [0002.273] I> 1.sd [0002.275] I> 2.usb [0002.277] I> 3.nvme [0002.279] I> 4.emmc [0002.281] I> 5.net [0002.283] I> Hit any key to stop autoboot: 4 3 2 1 [0004.290] initializing target [0004.290] calling apps_init() [0004.291] starting app kernel_boot_app [0004.310] I> found decompressor handler: lz4-legacy [0004.311] I> decompressing BMP blob ... [0004.322] I> Kernel type = Normal [0004.322] I> ########## SD (0) boot ########## [0004.322] I> No sdcard [0004.323] I> -0 params source = [0004.323] E> Blockdev open: exit error [0004.323] E> SD boot failed, err: 724238353 [0004.323] I> ########## USB (0) boot ########## [0004.329] W> No valid slot number is found in scratch register [0004.329] W> Return default slot: _a [0004.337] I> Validate XUSB-FW ... [0004.337] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.341] I> Encryption fuse is not ON [0004.344] I> USB Firmware Version: 60.09 release [0004.404] I> regulator of usb2-0 already enabled [0004.413] I> regulator of usb2-1 already enabled [0004.422] I> regulator of usb2-2 already enabled [0004.434] I> enabling 'vdd-5v-sata' regulator [0005.503] I> USB 2.0 port 4 new high-speed USB device detected [0005.505] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa42ce200, cmd_ring.dma = 0xa42ce240 [0005.606] I> Start to enumerate device [0005.607] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa42ce200, cmd_ring.dma = 0xa42ce240 [0005.611] I> This device is non-MSD, skip enumeration [0005.611] E> Failed to enumerate USB device [0005.611] E> failed to start xhci controller [0005.612] E> Error in init of XUSB host driver, err: 7979000d [0005.612] W> Failed to initialize device 5-0 [0005.616] E> USB boot failed, err: 2037973005 [0005.621] I> ########## NVME (0) boot ########## [0005.625] I> Initializing nvme device instance 0 [0005.630] I> Initializing nvme controller [0005.634] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.640] I> vpcie3v3-supply not found [0005.643] I> vpcie12v-supply not found [0005.647] W> Failed to get nvidia,plat-gpios [0005.651] I> tegrabl_pcie_soc_preinit: (0): [0005.655] I> Unpowergate [0005.658] I> tegrabl_car_clk_disable(0) ... [0005.662] I> tegrabl_car_rst_set(CORE, 0) ... [0005.666] I> tegrabl_car_rst_set(APB, 0) ... [0005.670] I> tegrabl_car_clk_enable(0) ... [0005.674] I> tegrabl_car_rst_clear(APB, 0) ... [0005.678] I> tegrabl_set_ctrl_state(0) [0005.682] I> CLR PCIE_APB:6 [0005.684] I> tegrabl_pcie_soc_init: (0): [0005.688] I> APPL initialization ... [0005.691] I> poweron phys [0005.694] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.700] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.706] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.711] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.716] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0005.848] I> PCIe controller-0 link is up [0005.849] I> tegra_pcie_info[0].cfg0_base = 0x38000000 [0005.849] I> tegra_pcie_info[0].cfg1_base = 0x38020000 [0005.849] I> tegra_pcie_info[0].atu_dma_base = 0x38040000 [0005.850] I> tegra_pcie_bus[0].mem = 0x38200000 [0005.850] I> Scanning busnr: 0 devfn: 0 [0005.850] I> PCIe IDs: 0x1ad010de [0005.853] I> PCIe RID_CC: 0x60400a1 [0005.857] I> Scanning busnr: 1 devfn: 0 [0005.860] I> PCIe IDs: 0xa80a144d [0005.864] I> PCIe RID_CC: 0x1080200 [0005.867] I> PCI Config: I/O=0x38100000, Memory=0x38200000 [0005.872] I> MEM64 bar_num=0 bar=0x38200000 [0005.876] I> Number of PCIe devices detected: 2 [0005.881] I> NVME page size: 4096 [0005.885] I> NVMe serial number: S5GXNF1R843770B [0005.889] I> NVMe model number: Samsung SSD 980 PRO 1TB [0005.895] I> NVMe firmware revision: 3B2QGXA7 [0005.900] I> block_count: 1953525168 [0005.903] I> supported_lba: 0 [0005.906] I> block_size_log2: 0x9 [0005.909] I> tegrabl_create_io_queue_cmd: queue size: 2 [0005.914] I> tegrabl_create_io_queue_cmd: queue size: 2 [0005.919] I> nvme device id 000a0000 [0005.922] I> nvme-0 params source = [0005.926] I> Found 1 partitions in NVME (instance 0) [0005.931] I> Look for boot partition [0005.934] I> Fallback: assuming 0th partition is boot partition [0005.946] I> Detect filesystem [0005.949] I> Loading kernel-bootctrl from partition [0005.949] I> Loading partition kernel-bootctrl at 0xa43c0000 from device(0x1) [0005.961] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0005.961] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0005.968] I> Loading extlinux.conf ... [0005.972] I> Loading extlinux.conf binary from rootfs ... [0005.977] I> rootfs path: /nvme/boot/extlinux/extlinux.conf [0006.027] I> lookup_linear_dir:447: Invalid file block num [0006.028] I> ext2_walk:142: 'boot' lookup failed [0006.028] I> ext4_open_file:666: '/boot/extlinux/extlinux.conf' lookup failed [0006.029] E> file /nvme/boot/extlinux/extlinux.conf open failed!! [0006.029] W> Failed to load extlinux.conf binary from rootfs (err=202113041) [0006.032] E> Failed to find/load /boot/extlinux/extlinux.conf [0006.038] I> Loading kernel ... [0006.041] I> No kernel binary path [0006.044] I> Continue to load from partition ... [0006.048] W> No valid slot number is found in scratch register [0006.054] W> Return default slot: _a [0006.057] I> A/B: bin_type (37) slot 0 [0006.061] I> Loading kernel from partition [0006.065] I> Loading partition kernel at 0xa43c0000 from device(0x1) [0006.555] I> Validate kernel ... [0006.556] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0006.935] I> Encryption fuse is not ON [0006.954] I> Checking boot.img header magic ... [0006.955] I> [OK] [0006.955] I> Loading kernel-dtb ... [0006.955] I> No kernel-dtb binary path [0006.955] I> Continue to load from partition ... [0006.956] W> No valid slot number is found in scratch register [0006.956] W> Return default slot: _a [0006.956] I> A/B: bin_type (38) slot 0 [0006.959] I> Loading kernel-dtb from partition [0006.964] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0006.978] I> Validate kernel-dtb ... [0006.979] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0006.983] I> Encryption fuse is not ON [0006.985] I> removable_boot_load_kernel_and_dtb: force NVME bdev to close !!! [0006.991] I> Kernel hdr @0xa43c0000 [0006.994] I> Kernel dtb @0x90000000 [0006.998] I> decompressor handler not found [0007.002] I> Copying kernel image (34484232 bytes) from 0xa43c0800 to 0x80080000 ... [0007.015] I> Done [0007.015] I> Move ramdisk (len: 7238344) from 0xa64a4000 to 0x92000000 [0007.020] I> Updated bpmp info to DTB [0007.022] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0007.026] I> Updated initrd info to DTB [0007.030] W> WARN: Fail to override "console=none" in commandline [0007.035] I> Active rootfs suffix: [0007.039] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0007.046] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0007.053] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0007.061] W> No valid slot number is found in scratch register [0007.066] W> Return default slot: _a [0007.070] I> Active slot suffix: [0007.073] I> add_boot_slot_suffix: slot_suffix = [0007.077] I> Linux Cmdline: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200 [0007.113] I> Updated bootarg info to DTB [0007.117] W> MAC addr invalid! [0007.120] E> Failed to get WIFI MAC address [0007.124] W> MAC addr invalid! [0007.127] E> Failed to get Bluetooth MAC address [0007.131] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:2f:f4:35 [0007.138] W> "plugin-manager" doesn't exist, creating [0007.142] I> Adding /chosen/plugin-manager/cvm [0007.146] W> "chip-id" doesn't exist, creating [0007.151] I> Adding /chosen/plugin-manager/chip-id [0007.155] W> "configs" doesn't exist, creating [0007.160] I> Adding /chosen/plugin-manager/configs [0007.164] W> "ids" doesn't exist, creating [0007.168] I> Adding /chosen/plugin-manager/ids [0007.173] W> "odm-data" doesn't exist, creating [0007.177] I> Adding /chosen/plugin-manager/odm-data [0007.185] W> "memory" doesn't exist, creating [0007.186] I> [0] START: 0x80000000, END: 0xac000000 [0007.190] I> [1] START: 0xac004000, END: 0xf0ad0000 [0007.195] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0007.200] I> dram_block larger than 80000000 [0007.204] I> [3] START: 0x100000000, END: 0x880000000 [0007.209] I> added [base:0x80000000, size:0x2c000000] to /memory [0007.215] I> added [base:0xac200000, size:0x44800000] to /memory [0007.221] I> added [base:0x100000000, size:0x780000000] to /memory [0007.228] I> Updated memory info to DTB [0007.231] E> add_disp_param: failed to get display params for du=0 [0007.237] W> "reset" doesn't exist, creating [0007.241] I> Adding ecid(00000001647d028320000000140101c0) to DT [0007.247] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0007.251] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0007.256] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0007.261] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0007.265] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0007.270] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0007.275] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0007.279] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0007.285] W> "misc-data" doesn't exist, creating [0007.289] I> Boot-device: eMMC [0007.291] I> Add boot-sdmmc to plugin-manager/misc-data [0007.297] I> Add storage-sdmmc to plugin-manager/misc-data [0007.302] W> Unknown storage device [0007.306] I> Add serial number:1425020060378 as DT property [0007.312] I> Plugin-manager override starting [0007.315] I> node /plugin-manager/fragement-tegra-wdt-en matches [0007.323] I> node /plugin-manager/fragement-soft-wdt matches [0007.331] I> node /plugin-manager/fragment-pcie-c5-rp matches [0007.335] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0007.346] I> Disable plugin-manager status in FDT [0007.347] I> Plugin-manager override finished successfully [0007.348] I> tegrabl_load_kernel_and_dtb: Done [0007.352] E> tegrabl_display_clear: display is not initialized [0007.358] W> Boot logo display failed... [0007.362] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-20181 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8194536 [ 0.000000] Kernel command line: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30104(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Memory: 31925496K/33298432K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf20000000 ( 512 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc800000000 ( 32768 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000008] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008975] Console: colour dummy device 80x25 [ 0.012447] console [tty0] enabled [ 0.015870] bootconsole [tegra_comb_uart0] disabled [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-20181 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8194536 [ 0.000000] Kernel command line: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30104(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Memory: 31925496K/33298432K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf20000000 ( 512 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc800000000 ( 32768 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000008] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008975] Console: colour dummy device 80x25 [ 0.012447] console [tty0] enabled [ 0.015870] bootconsole [tegra_comb_uart0] disabled [ 0.020854] kmemleak: Kernel memory leak detector disabled [ 0.020891] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.020929] pid_max: default: 32768 minimum: 301 [ 0.022012] Security Framework initialized [ 0.022578] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.022609] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.024685] ftrace: allocating 47077 entries in 184 pages [ 0.430691] sched-energy: Sched-energy-costs installed from DT [ 0.430730] ASID allocator initialised with 65536 entries [ 0.470504] tegra-id: chipid=21917. [ 0.470529] tegra-id: opt_subrevision=1. [ 0.470566] Tegra Revision: A02p SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.470623] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardi [ 0.470674] DTB Build time: Jul 26 2021 12:22:25 [ 0.520256] CPU1: Booted secondary processor [4e0f0040] [ 0.552418] CPU2: Booted secondary processor [4e0f0040] [ 0.584482] CPU3: Booted secondary processor [4e0f0040] [ 0.616738] CPU4: Booted secondary processor [4e0f0040] [ 0.648857] CPU5: Booted secondary processor [4e0f0040] [ 0.681350] CPU6: Booted secondary processor [4e0f0040] [ 0.713173] CPU7: Booted secondary processor [4e0f0040] [ 0.713428] Brought up 8 CPUs [ 0.713644] SMP: Total of 8 processors activated. [ 0.713676] CPU features: detected feature: Privileged Access Never [ 0.713727] CPU features: detected feature: LSE atomic instructions [ 0.713763] CPU features: detected feature: User Access Override [ 0.713788] CPU features: detected feature: 32-bit EL0 Support [ 0.715508] CPU: All CPU(s) started at EL2 [ 0.715621] alternatives: patching kernel code [ 0.724884] devtmpfs: initialized [ 0.789386] Initilizing CustomIPI irq domain [ 0.789669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.789706] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.806840] pinctrl core: initialized pinctrl subsystem [ 0.807111] OS set in device tree is not L4T. [ 0.807462] regulator-dummy: no parameters [ 0.807798] Initializing plugin-manager [ 0.807906] Plugin module not found [ 0.807953] Plugin-manager status disabled [ 0.809878] NET: Registered protocol family 16 [ 0.811328] pstore: using zlib compression [ 0.812166] console [pstore-1] enabled [ 0.812188] pstore: Registered ramoops as persistent store backend [ 0.812229] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.829499] cpuidle: using governor menu [ 0.831024] bpmp: waiting for handshake [ 0.831057] bpmp: handshake completed [ 0.831105] bpmp: synchronizing channels [ 0.831133] bpmp: channels synchronized [ 0.831173] bpmp: mail init ok [ 0.834583] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.834834] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.834857] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.834898] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.834918] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.834937] t19x-arm-smmu 12000000.iommu: nested translation [ 0.834964] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.835010] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000! [ 0.835034] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.835074] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.835093] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.839481] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.839536] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.842202] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.844793] tegra_aon_clk_init: ok [ 0.844847] Registering BPMP clocks... [ 0.844977] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.845892] Serial: AMBA PL011 UART driver [ 0.846061] tegra_powergate_init: DONE [ 0.846136] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardi [ 0.846179] DTB Build time: Jul 26 2021 12:22:25 [ 0.849939] Tegra reboot handler registered. [ 0.858416] iommu: Adding device 14180000.pcie to group 0 [ 0.859183] iommu: Adding device 14100000.pcie to group 1 [ 0.860088] iommu: Adding device 14140000.pcie to group 2 [ 0.860848] iommu: Adding device 141a0000.pcie to group 3 [ 0.862547] iommu: Adding device 2490000.ether_qos to group 4 [ 0.863179] iommu: Adding device 3100000.serial to group 5 [ 0.863800] iommu: Adding device 3110000.serial to group 6 [ 0.864249] iommu: Adding device 3140000.serial to group 7 [ 0.864967] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.865295] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.865343] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.865362] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.865379] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.865449] tegra-pmc: PMC Prod config success [ 0.865715] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.865769] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.866173] iommu: Adding device 3460000.sdhci to group 8 [ 0.866755] iommu: Adding device 3400000.sdhci to group 9 [ 0.867403] iommu: Adding device 2450000.ufshci to group 10 [ 0.868029] iommu: Adding device 3210000.spi to group 11 [ 0.868720] iommu: Adding device c260000.spi to group 12 [ 0.869858] iommu: Adding device 3160000.i2c to group 13 [ 0.870314] iommu: Adding device c240000.i2c to group 14 [ 0.870747] iommu: Adding device 3180000.i2c to group 15 [ 0.871218] iommu: Adding device 3190000.i2c to group 16 [ 0.871830] iommu: Adding device 31b0000.i2c to group 17 [ 0.872307] iommu: Adding device 31c0000.i2c to group 18 [ 0.872782] iommu: Adding device c250000.i2c to group 19 [ 0.873223] iommu: Adding device 31e0000.i2c to group 20 [ 0.874192] iommu: Adding device sound to group 21 [ 0.874792] iommu: Adding device 3510000.hda to group 22 [ 0.875556] iommu: Adding device bc00000.rtcpu to group 23 [ 0.878301] iommu: Adding device 13e10000.host1x to group 24 [ 0.878850] iommu: Adding device 13e10000.host1x:ctx0 to group 25 [ 0.879289] iommu: Adding device 13e10000.host1x:ctx1 to group 26 [ 0.879818] iommu: Adding device 13e10000.host1x:ctx2 to group 27 [ 0.880261] iommu: Adding device 13e10000.host1x:ctx3 to group 28 [ 0.880777] iommu: Adding device 13e10000.host1x:ctx4 to group 29 [ 0.881238] iommu: Adding device 13e10000.host1x:ctx5 to group 30 [ 0.881712] iommu: Adding device 13e10000.host1x:ctx6 to group 31 [ 0.882200] iommu: Adding device 13e10000.host1x:ctx7 to group 32 [ 0.882823] iommu: Adding device 15340000.vic to group 33 [ 0.883281] iommu: Adding device 15380000.nvjpg to group 34 [ 0.883634] iommu: Adding device 15500000.tsec to group 35 [ 0.883989] iommu: Adding device 15100000.tsecb to group 36 [ 0.884318] iommu: Adding device 15480000.nvdec to group 37 [ 0.884645] iommu: Adding device 15140000.nvdec1 to group 38 [ 0.885016] iommu: Adding device 154c0000.nvenc to group 39 [ 0.885367] iommu: Adding device 15a80000.nvenc1 to group 40 [ 0.885899] iommu: Adding device 15880000.nvdla0 to group 41 [ 0.886414] iommu: Adding device 158c0000.nvdla1 to group 42 [ 0.887176] iommu: Adding device 15200000.nvdisplay to group 43 [ 0.891298] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.891405] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.892276] iommu: Adding device 15210000.nvdisplay to group 44 [ 0.892366] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.892838] iommu: Adding device 15220000.nvdisplay to group 45 [ 0.892900] t19x-arm-smmu: Adding 15220000.nvdisplay to ISO SMMU client [ 0.895394] iommu: Adding device 15c10000.vi to group 46 [ 0.895653] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.896160] iommu: Adding device 14800000.isp to group 47 [ 0.897285] iommu: Adding device 16000000.pva0 to group 48 [ 0.897969] iommu: Adding device 16800000.pva1 to group 49 [ 0.898578] iommu: Adding device 15810000.se to group 50 [ 0.899040] iommu: Adding device 15820000.se to group 51 [ 0.899357] iommu: Adding device 15830000.se to group 52 [ 0.899716] iommu: Adding device 15840000.se to group 53 [ 0.900060] iommu: Adding device c1a0000.aon to group 54 [ 0.902000] iommu: Adding device d000000.bpmp to group 55 [ 0.902393] bpmp: ping status is 0 [ 0.902563] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.906038] bpmp d000000.bpmp: probe ok [ 0.908444] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.908997] iommu: Adding device smmu_test to group 56 [ 0.910244] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.910289] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.910328] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.910369] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.910407] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.910445] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.910509] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.910549] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.910588] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.910625] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.910669] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.910706] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.910744] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.910783] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.910820] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.910857] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.910910] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.911021] mc-err: mcerr ops are set to t19x [ 0.917325] iommu: Adding device 2600000.dma to group 57 [ 0.922588] gpio gpiochip0: gpio-line-names specifies 210 line names but there are 224 lines on the chip [ 0.923714] GPIO line 339 (wifi-enable) hogged as output/high [ 0.924074] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.932033] gpio gpiochip1: gpio-line-names specifies 30 line names but there are 40 lines on the chip [ 0.932154] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.932483] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.935146] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.935181] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.935204] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.936191] iommu: Adding device 3550000.xudc to group 58 [ 0.936899] iommu: Adding device 3610000.xhci to group 59 [ 0.939661] arm64_ras arm64_ras: probed [ 0.940179] ras_fhi_enable: FHI 479 enabled on CPU0 [ 0.940240] ras_fhi_enable: FHI 480 enabled on CPU1 [ 0.940329] ras_fhi_enable: FHI 481 enabled on CPU2 [ 0.940427] ras_fhi_enable: FHI 482 enabled on CPU3 [ 0.940521] ras_fhi_enable: FHI 483 enabled on CPU4 [ 0.940616] ras_fhi_enable: FHI 484 enabled on CPU5 [ 0.940690] ras_fhi_enable: FHI 485 enabled on CPU6 [ 0.940765] ras_fhi_enable: FHI 486 enabled on CPU7 [ 0.940999] carmel_ras_enable: RAS enabled on cpu0 [ 0.941237] carmel_ras_enable: RAS enabled on cpu1 [ 0.941457] carmel_ras_enable: RAS enabled on cpu2 [ 0.941653] carmel_ras_enable: RAS enabled on cpu3 [ 0.941861] carmel_ras_enable: RAS enabled on cpu4 [ 0.942049] carmel_ras_enable: RAS enabled on cpu5 [ 0.942266] carmel_ras_enable: RAS enabled on cpu6 [ 0.942460] carmel_ras_enable: RAS enabled on cpu7 [ 0.942567] carmel_ras carmel_ras: probed [ 0.944048] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 488, noc_nonsecure_irq = 487> [ 0.944698] tegra-cbb c600000.aon-noc: noc_secure_irq = 490, noc_nonsecure_irq = 489> [ 0.945938] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 492, noc_nonsecure_irq = 491> [ 0.947151] tegra-cbb be00000.rce-noc: noc_secure_irq = 494, noc_nonsecure_irq = 493> [ 0.948251] tegra-cbb b600000.sce-noc: noc_secure_irq = 496, noc_nonsecure_irq = 495> [ 0.948703] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.952279] vdd-3v3-cvb: 3300 mV [ 0.952704] vdd-1v8-cvb: 1800 mV [ 0.953223] vdd-1v8-sd: 1800 mV [ 0.953608] vdd-epb-1v0: 1000 mV [ 0.953985] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.954377] vdd-sdmmc1-sw: 3300 mV [ 0.954843] avdd-cam-2v8: 2800 mV [ 0.955204] vdd-sata-1v5: 1500 mV [ 0.955626] vdd-1v8-slt: 1800 mV [ 0.956023] vdd-3v3-slt: 3300 mV [ 0.956398] vdd-fan: 5000 mV [ 0.956903] vdd-hdmi-5v0: 5000 mV [ 0.957404] vdd_sys_en: 1200 mV [ 0.957854] vdd-5v-sata: 5000 mV [ 0.958484] vdd-3v3-pcie: 3300 mV [ 0.959067] vdd-12v-pcie: 1200 mV [ 0.959495] vdd-ac-bat: 5000 mV [ 0.959718] vdd-5v-sata: supplied by vdd-ac-bat [ 0.994380] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.999253] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.999614] SCSI subsystem initialized [ 1.000210] usbcore: registered new interface driver usbfs [ 1.000337] usbcore: registered new interface driver hub [ 1.000448] usbcore: registered new device driver usb [ 1.011685] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 1.014772] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 1.025494] vdd-1v0: at 1000 mV [ 1.029513] vdd-1v8-hs: at 1800 mV [ 1.033553] vdd-1v8-ls: at 1800 mV [ 1.037548] vdd-1v8-ao: at 1800 mV [ 1.045570] vddio-ddr-1v1: at 1100 mV [ 1.053353] vdd-rtc: at 800 mV [ 1.054587] spmic-ldo1: at 2375 mV [ 1.065393] vdd-ao-3v3: at 3300 mV [ 1.071322] vddio-emmc-3v3: at 3300 mV [ 1.072725] spmic-ldo4: at 1587 mV [ 1.079342] vdd-usb-3v3: at 3300 mV [ 1.087382] vddio-sdmmc1-3v3: at 3300 mV [ 1.091406] vdd-csi-1v2: at 1200 mV [ 1.092996] spmic-ldo8: at 1800 mV [ 1.097913] GPIO line 246 (gpio_default) hogged as output/high [ 1.099303] GPIO line 247 (gpio_default) hogged as output/high [ 1.099773] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 1.100166] max77620 4-003c: max77620 probe successful [ 1.100953] media: Linux media interface: v0.10 [ 1.101089] Linux video capture interface: v2.00 [ 1.102945] pps_core: LinuxPPS API ver. 1 registered [ 1.102970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.103042] PTP clock support registered [ 1.103477] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.103841] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.103905] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.106702] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 1.106798] trusty trusty: selected api version: 3 (requested 3) [ 1.108138] Advanced Linux Sound Architecture Driver Initialized. [ 1.108670] Bluetooth: Core ver 2.22 [ 1.108743] NET: Registered protocol family 31 [ 1.108762] Bluetooth: HCI device and connection manager initialized [ 1.108793] Bluetooth: HCI socket layer initialized [ 1.108820] Bluetooth: L2CAP socket layer initialized [ 1.108862] Bluetooth: SCO socket layer initialized [ 1.111576] camchar: rtcpu character device driver loaded [ 1.112819] clocksource: Switched to clocksource arch_sys_counter [ 1.158375] VFS: Disk quotas dquot_6.6.0 [ 1.158492] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.158846] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.160350] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.160453] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.160938] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.160963] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.160991] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.161017] nvmap_page_pool_init: Total RAM pages: 8169790 [ 1.161037] nvmap_page_pool_init: nvmap page pool size: 1021223 pages (3989 MB) [ 1.161346] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.161827] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.163134] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.177280] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.177606] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.178046] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.178342] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.178647] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.178808] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tboard_tegra [ 1.178957] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tdiode_tegra [ 1.180214] la/ptsa driver initialized. [ 1.180591] NET: Registered protocol family 2 [ 1.181467] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.182782] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.183397] TCP: Hash tables configured (established 262144 bind 65536) [ 1.183464] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 1.183944] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 1.184709] NET: Registered protocol family 1 [ 1.185331] RPC: Registered named UNIX socket transport module. [ 1.185352] RPC: Registered udp transport module. [ 1.185370] RPC: Registered tcp transport module. [ 1.185386] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.185691] Trying to unpack rootfs image as initramfs... [ 1.408229] Freeing initrd memory: 7068K [ 1.427235] random: fast init done [ 1.431482] host1x 13e10000.host1x: initialized [ 1.433916] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.439051] audit: initializing netlink subsys (disabled) [ 1.439127] audit: type=2000 audit(1.044:1): initialized [ 1.439865] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 1.448704] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.449981] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.450600] 9p: Installing v9fs 9p2000 file system support [ 1.455462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.455633] io scheduler noop registered [ 1.455858] io scheduler cfq registered (default) [ 1.459793] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.493699] iommu: Adding device 2993000.adsp to group 60 [ 1.609099] iommu: Adding device aconnect@2a41000:adsp_audio to group 61 [ 1.610152] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.624654] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.625182] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.625753] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.626158] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.629841] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.630104] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.630143] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 1.633837] tsec 15500000.tsec: initialized [ 1.635772] tsec 15100000.tsecb: initialized [ 1.640186] nvdec 15480000.nvdec: initialized [ 1.643005] nvdec 15140000.nvdec1: initialized [ 1.649731] falcon 15340000.vic: initialized [ 1.651834] falcon 15380000.nvjpg: initialized [ 1.653962] falcon 154c0000.nvenc: initialized [ 1.656062] falcon 15a80000.nvenc1: initialized [ 1.659065] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.661083] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.662969] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.664387] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.665931] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.667396] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.668734] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.670089] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.674039] t194-nvcsi 15a00000.nvcsi: initialized [ 1.679635] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.680104] scare-pigeon 14b00000.isp-thi: initialized [ 1.690040] pva 16000000.pva0: initialized [ 1.721244] pva 16800000.pva1: initialized [ 1.751475] nvdla 15880000.nvdla0: initialized [ 1.782282] nvdla 158c0000.nvdla1: initialized [ 1.784153] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.784187] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.784270] tegradccommon 15200000.dc_common: dma mapping done [ 1.784945] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor2 [ 1.785012] generic_infoframe_type: 0x87 [ 1.785125] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.785193] tegradc 15200000.nvdisplay: Display dc.ffffff800bce0000 registered with id=0 [ 1.788912] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.788947] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 1066500000 Hz [ 1.788971] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 358400000 Hz [ 1.789201] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.789228] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.791948] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.791980] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.795215] tegradc 15200000.nvdisplay: probed [ 1.795783] Console: switching to colour frame buffer device 80x30 [ 1.795834] tegradc 15200000.nvdisplay: fb registered [ 1.796098] gpio tegra-gpio wake71 for gpio=98(M:2) [ 1.796539] Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0) [ 1.796933] Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1) [ 1.797170] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=85 [ 1.797198] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.797478] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.797659] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.797806] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.797834] tegra_cec 3960000.tegra_cec: probed [ 1.809000] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.809861] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.809898] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.810331] kfuse 3830000.kfuse: initialized [ 1.816518] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.819127] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 51, base_baud = 0) is a TEGRA_UART [ 1.820262] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 52, base_baud = 0) is a TEGRA_UART [ 1.821233] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 53, base_baud = 0) is a TEGRA_UART [ 2.820883] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.820892] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.330320] console [ttyTCU0] enabled [ 4.334158] [drm] Initialized [ 4.349077] brd: module loaded [ 4.354570] loop: module loaded [ 4.354715] tegra_profiler: version: 1.145, samples/io: 49/28 [ 4.354979] tegra_profiler: auth: init [ 4.355489] nct1008_nct72 4-004c: starting parse dt [ 4.355779] THERMAL EST: found 3 subdevs [ 4.355785] THERMAL EST num_resources: 0 [ 4.355791] [THERMAL EST subdev 0] [ 4.355795] [THERMAL EST subdev 1] [ 4.355800] [THERMAL EST subdev 2] [ 4.355811] THERMAL EST: Found 2 profiles, default profile is quiet [ 4.356182] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 4.356185] THERMAL EST: thz register success. [ 4.357869] THERMAL EST: end of probe, return err: 0 [ 4.358763] ufs_tegra 2450000.ufshci: freq-table-hz property not specified [ 4.358774] ufs_tegra 2450000.ufshci: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 4.359570] ufs_tegra 2450000.ufshci: wakeup init done, cdirq 461 [ 4.359581] gpio tegra-gpio-aon wake25 for gpio=32(EE:0) [ 4.370766] sd: No Scsi addr parsed to reserve index [ 4.370794] hisi_sas: driver version v1.6 [ 4.375743] libphy: Fixed MDIO Bus: probed [ 4.376413] tun: Universal TUN/TAP device driver, 1.6 [ 4.376417] tun: (C) 1999-2004 Max Krasnyansky [ 4.377151] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.377154] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.377190] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.377192] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.377226] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.377229] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.377262] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 4.377265] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.387703] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 4.388258] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 2f f4 35 [ 4.388296] Using phyrst_lpmode = 1 from DT [ 4.388384] libphy: dwc_phy: probed [ 4.390357] PPP generic driver version 2.4.2 [ 4.390536] PPP BSD Compression module registered [ 4.390540] PPP Deflate Compression module registered [ 4.390558] PPP MPPE Compression module registered [ 4.390562] NET: Registered protocol family 24 [ 4.390613] usbcore: registered new interface driver r8152 [ 4.390658] usbcore: registered new interface driver asix [ 4.390687] usbcore: registered new interface driver ax88179_178a [ 4.390713] usbcore: registered new interface driver cdc_ether [ 4.390739] usbcore: registered new interface driver net1080 [ 4.390765] usbcore: registered new interface driver cdc_subset [ 4.390792] usbcore: registered new interface driver zaurus [ 4.390830] usbcore: registered new interface driver cdc_ncm [ 4.390992] VFIO - User Level meta-driver version: 0.3 [ 4.392046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.392060] ehci-pci: EHCI PCI platform driver [ 4.392093] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.392101] ohci-pci: OHCI PCI platform driver [ 4.392136] ohci-platform: OHCI generic platform driver [ 4.397103] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 4.397108] tegra-xusb 3610000.xhci: USB3 port 2 has OTG_CAP [ 4.400076] Could not get extcon-dev /xhci@3610000:id(0) [ 4.403431] usbcore: registered new interface driver uas [ 4.403489] usbcore: registered new interface driver usb-storage [ 4.403558] usbcore: registered new interface driver usbserial [ 4.406026] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 4.406068] Could not get extcon-dev /xudc@3550000:vbus(0) [ 4.409307] ucsi_ccg 1-0008: FW1 Version: gn v12.06, [Base 3.1.2.1487] [ 4.409316] ucsi_ccg 1-0008: FW2 Version: gn v12.06, [Base 3.1.2.1487] [ 4.410456] ucsi_ccg 1-0008: fw_mode: 2 [ 4.410461] ucsi_ccg 1-0008: fw1_invalid: 0 [ 4.410465] ucsi_ccg 1-0008: fw2_invalid: 0 [ 4.410470] ucsi_ccg 1-0008: silicon_id: 0x1f00 [ 4.410639] ucsi_ccg 1-0008: typec-port0 extcon dev created [ 4.410759] ucsi_ccg 1-0008: typec-port1 extcon dev created [ 4.410861] ucsi_ccg 1-0008: typec-pd extcon dev created [ 4.410987] gpio tegra-gpio-aon wake48 for gpio=10(BB:2) [ 4.416582] ucsi_ccg 1-0008: HPI Command Success. [ 4.419078] ucsi_ccg 1-0008: HPI Command Success. [ 4.419092] ucsi_ccg 1-0008: ucsi_ccg_init: complete [ 4.419537] mousedev: PS/2 mouse device common for all mice [ 4.419653] usbcore: registered new interface driver xpad [ 4.552065] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.553644] Wake73 for irq=42 [ 4.554889] rtc rtc1: alarm rtc device [ 4.554903] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.554946] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.555056] i2c /dev entries driver [ 4.557220] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 4.563589] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 4.564020] FAN dev name: pwm-fan [ 4.564068] FAN:gpio request success. [ 4.564077] FAN: can't find tach_gpio [ 4.564086] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.564137] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.564344] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.564350] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.564960] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.564968] pwm_fan_driver pwm-fan: index 1: pwm=77, rpm=1000, rru=2, rrd=2, state:2 [ 4.564974] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 4.564980] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 4.564985] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.564991] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.564996] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.565001] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.565008] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.565014] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.565718] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.566552] device-mapper: uevent: version 1.0.3 [ 4.566923] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.590497] tegra194_cpufreq_probe: platform driver Initialization: pass [ 4.596410] cpuidle: Initializing cpuidle driver [ 4.608501] sdhci: Secure Digital Host Controller Interface driver [ 4.608503] sdhci: Copyright(c) Pierre Ossman [ 4.608505] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.609652] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.611644] CMDQ: cmdq_platfm_init successful [ 4.612111] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 4.614954] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 4.616419] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 256 [ 4.620170] tegra-se-nvhost 15810000.se: initialized [ 4.621408] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.622147] tegra-se-nvhost 15820000.se: initialized [ 4.623112] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.623652] tegra-se-nvhost 15830000.se: initialized [ 4.624291] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.625076] tegra-se-nvhost 15840000.se: initialized [ 4.625962] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.626927] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.627027] hidraw: raw HID events driver (C) Jiri Kosina [ 4.628163] usbcore: registered new interface driver usbhid [ 4.628165] usbhid: USB HID core driver [ 4.633419] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 4.634327] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.634658] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.635119] denver_knobs_init:MTS_VERSION:53250041 [ 4.635374] tegra19x_actmon d230000.actmon: in actmon_register()... [ 4.636072] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.636538] t19x_cache tegra-cache: probed [ 4.642574] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 4.642588] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 4.643070] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 4.643392] PLL_AON clock registered [ 4.644970] Clocks initialized successfully [ 4.646197] nvpmodel: initialized successfully [ 4.650882] trusty-virtio trusty:virtio: initializing [ 4.651064] trusty_ipc virtio0: vring0: va(pa) ffffffc7d7510000(0) qsz 32 notifyid 1 [ 4.651071] trusty_ipc virtio0: vring1: va(pa) ffffffc7d7512000(0) qsz 32 notifyid 2 [ 4.651174] trusty-virtio trusty:virtio: initializing done [ 4.651339] trusty_ipc virtio0: is online [ 4.652036] usbcore: registered new interface driver snd-usb-audio [ 4.652423] tegra-hda 3510000.hda: Override SDO lines to 4 [ 4.652812] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.665505] input: tegra-hda-galen-t194 HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.665752] input: tegra-hda-galen-t194 HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.665901] input: tegra-hda-galen-t194 HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 4.666115] input: tegra-hda-galen-t194 HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 4.669503] gpio tegra-gpio wake8 for gpio=55(G:7) [ 4.669551] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.746487] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.757567] mmc0: periodic cache flush enabled [ 4.757577] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.757981] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB [ 4.758205] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 8.00 MiB [ 4.758403] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 8.00 MiB [ 4.762646] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB [ 4.766519] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p22 [ 5.287355] nct1008_nct72 4-004c: !!!Found deprecated property!!! [ 5.293332] nct1008_nct72 4-004c: success parsing dt [ 5.298551] nct1008_nct72 4-004c: success in enabling tmp451 VDD rail [ 5.340510] nct1008_nct72 4-004c: LOC shutdown limit 107 [ 5.341501] nct1008_nct72 4-004c: EXT shutdown limit 109 [ 5.379044] nct1008_nct72 4-004c: initial LOC temp: 28000 [ 5.379777] nct1008_nct72 4-004c: initial EXT temp: 39750 [ 5.381263] nct1008_nct72 4-004c: hi_b:-10, lo_b:128 [ 5.382332] nct1008_nct72 4-004c: nct1008_probe: initialized [ 6.501556] gpio tegra-gpio wake12 for gpio=149(S:5) [ 6.579576] OPE platform probe [ 6.579748] OPE platform probe successful [ 6.713524] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 6.713745] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 6.713907] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 6.714067] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 6.714243] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 6.714418] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 6.714603] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 6.714778] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 6.714940] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 6.715096] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 6.715255] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 6.715419] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 6.715588] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 6.715753] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 6.715930] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 6.716139] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 6.716606] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 6.721522] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 6.727804] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 6.733837] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 6.770126] input: tegra-snd-t19x-mobile-rt565x Headset Jack as /devices/sound/sound/card1/input4 [ 6.771448] u32 classifier [ 6.771505] Actions configured [ 6.771659] Initializing XFRM netlink socket [ 6.772224] NET: Registered protocol family 10 [ 6.772982] NET: Registered protocol family 17 [ 6.773091] NET: Registered protocol family 15 [ 6.773217] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_ne. [ 6.785489] Bluetooth: RFCOMM socket layer initialized [ 6.790351] Bluetooth: RFCOMM ver 1.11 [ 6.794409] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.800360] Bluetooth: HIDP socket layer initialized [ 6.805095] 9pnet: Installing 9P2000 support [ 6.809491] Key type dns_resolver registered [ 6.814361] Registered cp15_barrier emulation handler [ 6.819260] Registered setend emulation handler [ 6.825130] registered taskstats version 1 [ 6.827985] tegra-pcie-dw 14180000.pcie: Setting init speed to max speed [ 6.836118] OF: PCI: host bridge /pcie@14180000 ranges: [ 6.840122] OF: PCI: IO 0x38100000..0x381fffff -> 0x38100000 [ 6.846144] OF: PCI: MEM 0x1b40000000..0x1bffffffff -> 0x40000000 [ 6.852350] OF: PCI: MEM 0x1800000000..0x1b3fffffff -> 0x1800000000 [ 6.968825] tegra-pcie-dw 14180000.pcie: link is up [ 6.969157] tegra-pcie-dw 14180000.pcie: PCI host bridge to bus 0000:00 [ 6.969274] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.969367] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff]) [ 6.969519] pci_bus 0000:00: root bus resource [mem 0x1b40000000-0x1bffffffff] (bus address [0x40000000-0xffffffff]) [ 6.969685] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b3fffffff pref] [ 6.970153] iommu: Adding device 0000:00:00.0 to group 62 [ 6.971619] iommu: Adding device 0000:01:00.0 to group 63 [ 6.981679] pci 0000:00:00.0: BAR 14: assigned [mem 0x1b40000000-0x1b400fffff] [ 6.981805] pci 0000:01:00.0: BAR 0: assigned [mem 0x1b40000000-0x1b40003fff 64bit] [ 6.981991] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 6.982105] pci 0000:00:00.0: bridge window [mem 0x1b40000000-0x1b400fffff] [ 6.982230] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.982405] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 6.982745] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 6.985122] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 6.991910] nvme nvme0: pci function 0000:01:00.0 [ 6.995921] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 6.996057] tegra-pcie-dw 14100000.pcie: Setting init speed to max speed [ 6.996762] OF: PCI: host bridge /pcie@14100000 ranges: [ 6.996792] OF: PCI: IO 0x30100000..0x301fffff -> 0x30100000 [ 6.996799] OF: PCI: MEM 0x1230000000..0x123fffffff -> 0x40000000 [ 6.996804] OF: PCI: MEM 0x1200000000..0x122fffffff -> 0x1200000000 [ 7.104833] tegra-pcie-dw 14100000.pcie: link is up [ 7.105127] tegra-pcie-dw 14100000.pcie: PCI host bridge to bus 0001:00 [ 7.105243] pci_bus 0001:00: root bus resource [bus 00-ff] [ 7.105335] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 7.105492] pci_bus 0001:00: root bus resource [mem 0x1230000000-0x123fffffff] (bus address [0x40000000-0x4fffffff]) [ 7.105661] pci_bus 0001:00: root bus resource [mem 0x1200000000-0x122fffffff pref] [ 7.106089] iommu: Adding device 0001:00:00.0 to group 64 [ 7.107530] iommu: Adding device 0001:01:00.0 to group 65 [ 7.118532] pci 0001:00:00.0: BAR 14: assigned [mem 0x1230000000-0x12300fffff] [ 7.118690] pci 0001:00:00.0: BAR 13: assigned [io 0x100000-0x100fff] [ 7.118797] pci 0001:01:00.0: BAR 6: assigned [mem 0x1230000000-0x123000ffff pref] [ 7.118921] pci 0001:01:00.0: BAR 5: assigned [mem 0x1230010000-0x12300101ff] [ 7.119110] pci 0001:01:00.0: BAR 4: assigned [io 0x100000-0x10000f] [ 7.123628] pci 0001:01:00.0: BAR 0: assigned [io 0x100010-0x100017] [ 7.130344] pci 0001:01:00.0: BAR 2: assigned [io 0x100018-0x10001f] [ 7.136471] pci 0001:01:00.0: BAR 1: assigned [io 0x100020-0x100023] [ 7.143327] pci 0001:01:00.0: BAR 3: assigned [io 0x100024-0x100027] [ 7.149629] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 7.154816] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 7.161313] pci 0001:00:00.0: bridge window [mem 0x1230000000-0x12300fffff] [ 7.168359] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.177184] pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 7.185914] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt [ 7.192689] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt [ 7.200029] ahci 0001:01:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 7.207005] ahci 0001:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 7.215569] scsi host1: ahci [ 7.218207] ata1: SATA max UDMA/133 abar m512@0x1230010000 port 0x1230010100 irq 821 [ 7.226294] tegra-pcie-dw 14140000.pcie: Setting init speed to max speed [ 7.232618] nvme0n1: p1 [ 7.233413] OF: PCI: host bridge /pcie@14140000 ranges: [ 7.233430] OF: PCI: IO 0x34100000..0x341fffff -> 0x34100000 [ 7.233437] OF: PCI: MEM 0x12b0000000..0x12bfffffff -> 0x40000000 [ 7.233444] OF: PCI: MEM 0x1280000000..0x12afffffff -> 0x1280000000 [ 7.540237] ata1: SATA link down (SStatus 0 SControl 300) [ 7.745085] tegra-pcie-dw 14140000.pcie: link is down [ 7.745359] tegra-pcie-dw 14140000.pcie: PCI host bridge to bus 0003:00 [ 7.745476] pci_bus 0003:00: root bus resource [bus 00-ff] [ 7.745568] pci_bus 0003:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x34100000-0x341fffff]) [ 7.745726] pci_bus 0003:00: root bus resource [mem 0x12b0000000-0x12bfffffff] (bus address [0x40000000-0x4fffffff]) [ 7.745900] pci_bus 0003:00: root bus resource [mem 0x1280000000-0x12afffffff pref] [ 7.746321] iommu: Adding device 0003:00:00.0 to group 66 [ 7.746695] pci 0003:00:00.0: PCI bridge to [bus 01-ff] [ 7.746798] pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.747155] pcieport 0003:00:00.0: Signaling PME through PCIe PME interrupt [ 7.747666] iommu: Removing device 0003:00:00.0 from group 66 [ 7.749387] tegra-pcie-dw 14140000.pcie: PCIe link is not up...! [ 7.750014] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 7.857422] OF: PCI: host bridge /pcie@141a0000 ranges: [ 7.857561] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 7.857671] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 7.857775] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 8.369818] tegra-pcie-dw 141a0000.pcie: link is down [ 8.370098] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 8.370226] pci_bus 0005:00: root bus resource [bus 00-ff] [ 8.370322] pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff]) [ 8.370481] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 8.370661] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 8.371077] iommu: Adding device 0005:00:00.0 to group 66 [ 8.371435] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 8.371536] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 8.371840] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 8.372411] iommu: Removing device 0005:00:00.0 from group 66 [ 8.374361] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 8.388029] tegra-cbb 14040000.cv-noc: noc_secure_irq = 100, noc_nonsecure_irq = 99> [ 8.392975] tegra194-isp5 14800000.isp: initialized [ 8.398188] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 8.400743] tegra194-vi5 15c10000.vi: initialized [ 8.403823] tegra194-vi5 15c10000.vi: ep of_device is not enabled /host1x/vi@15c10000/ports/port@0/endpoint. [ 8.404882] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 8.405098] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 8.406281] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 8.406284] tegra-xusb 3610000.xhci: USB3 port 2 has OTG_CAP [ 8.408818] tegra-xusb 3610000.xhci: extcon 0: ffffffc7d7a23800 id [ 8.409207] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 8.409230] tegra-xudc-new 3550000.xudc: device count: 1 [ 8.410038] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 8.410043] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 8.410155] tegra-thermal-throttle bthrot_cdev: clk:cpu max:2265600000, min:115200000 steps:28 [ 8.410237] tegra-xudc-new 3550000.xudc: entering ELPG [ 8.410456] tegra-xudc-new 3550000.xudc: entering ELPG done [ 8.411522] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 8.411560] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.411572] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.412231] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 8.412254] tegra-xusb 3610000.xhci: irq 474, io mem 0x03610000 [ 8.412371] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.412374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.412377] usb usb1: Product: xHCI Host Controller [ 8.412380] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 8.412382] usb usb1: SerialNumber: 3610000.xhci [ 8.412652] hub 1-0:1.0: USB hub found [ 8.412699] hub 1-0:1.0: 4 ports detected [ 8.412938] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.412945] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.412949] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.413054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 8.413057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.413060] usb usb2: Product: xHCI Host Controller [ 8.413062] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 8.413064] usb usb2: SerialNumber: 3610000.xhci [ 8.413238] hub 2-0:1.0: USB hub found [ 8.413261] hub 2-0:1.0: 4 ports detected [ 8.413721] Wake76 for irq=199 [ 8.413723] Wake77 for irq=199 [ 8.413724] Wake78 for irq=199 [ 8.413726] Wake79 for irq=199 [ 8.413727] Wake80 for irq=199 [ 8.413728] Wake81 for irq=199 [ 8.413729] Wake82 for irq=199 [ 8.413750] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 8.413753] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 8.462073] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1377000000, min:114750000 steps:13 [ 8.462094] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 8.462097] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 8.462207] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:56 cutoff:0 [ 8.462254] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 8.462256] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 8.514795] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:52 cutoff:1 [ 8.514820] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 8.514824] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 8.515165] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:56 cutoff:0 [ 8.515211] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 8.515214] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 8.515675] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 8.515701] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 8.515720] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 8.516021] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:52 cutoff:1 [ 8.516703] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 8.517365] usb usb2: usb_suspend_both: status 0 [ 8.589327] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 8.589591] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 8.589730] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 8.589841] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 8.590165] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80 [ 8.590244] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x170 [ 8.590422] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (71) [ 8.590425] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 8.591417] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d01148 [ 8.591731] Wake83 for irq=211 [ 8.591787] gpio tegra-gpio wake67 for gpio=48(G:0) [ 8.591870] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 8.591968] input: gpio-keys as /devices/gpio-keys/input/input5 [ 8.622106] tegra_rtc c2a0000.rtc: setting system clock to 2021-12-17 09:10:03 UTC (1639732203) [ 8.622550] mmcblk mmc0:0001: Card claimed for testing. [ 8.664062] bpmp: mounted debugfs mirror [ 8.679449] ALSA device list: [ 8.679453] #0: tegra-hda-galen-t194 at 0x3518000 irq 70 [ 8.679455] #1: tegra-snd-t19x-mobile-rt565x [ 8.752815] usb 1-4: new high-speed USB device number 2 using tegra-xusb [ 8.773305] usb 1-4: New USB device found, idVendor=0bda, idProduct=c811 [ 8.773309] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.773312] usb 1-4: Product: 802.11ac NIC [ 8.773314] usb 1-4: Manufacturer: Realtek [ 8.773316] usb 1-4: SerialNumber: 123456 [ 8.960474] tegradc 15210000.nvdisplay: DT parsed successfully [ 8.966114] tegradc 15210000.nvdisplay: Display dc.ffffff80113d0000 registered with id=1 [ 8.974443] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 8.980333] tegradc 15210000.nvdisplay: vpulse3 syncpt # 15 for dc 1 [ 8.994351] tegradc 15210000.nvdisplay: probed [ 8.994638] tegradc 15210000.nvdisplay: fb registered [ 8.999765] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 9.000932] tegradc 15220000.nvdisplay: disp2 connected to head2->/host1x/sor1 [ 9.000948] tegradc 15220000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 9.001004] tegradc 15220000.nvdisplay: DT parsed successfully [ 9.001036] tegradc 15220000.nvdisplay: Display dc.ffffff8011610000 registered with id=2 [ 9.001173] tegradc 15220000.nvdisplay: vblank syncpt # 16 for dc 2 [ 9.001192] tegradc 15220000.nvdisplay: vpulse3 syncpt # 17 for dc 2 [ 9.045181] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 9.053088] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 9.058174] tegradc 15210000.nvdisplay: blank - powerdown [ 9.063490] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 9.071975] Extcon DP: HPD disabled [ 9.075374] hpd: hpd_switch 0 [ 9.078689] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 9.085439] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 9.091296] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 9.099006] tegradc 15220000.nvdisplay: probed [ 9.103054] tegradc 15220000.nvdisplay: fb registered [ 9.111506] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 9.114170] Freeing unused kernel memory: 8640K [ 9.119983] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 9.119993] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 9.133337] tegradc 15220000.nvdisplay: blank - powerdown [ 9.138542] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 9.146580] Extcon DP: HPD disabled [ 9.150257] hpd: hpd_switch 0 [ 9.153492] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 9.160242] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 9.162064] Root device found: mmcblk0p1 [ 9.163567] Found dev node: /dev/mmcblk0p1 [ 9.173976] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 9.187836] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.191126] Rootfs mounted over mmcblk0p1 [ 9.209878] Switching from initrd to actual rootfs [ 9.313727] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.317173] cgroup: cgroup2: unknown option "nsdelegate" [ 9.323517] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP) [ 9.324462] systemd[1]: Detected architecture arm64. [ 9.331163] systemd[1]: Set hostname to . [ 9.428414] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=a. [ 9.428726] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit) [ 9.554907] random: systemd: uninitialized urandom read (16 bytes read) [ 9.557613] systemd[1]: Created slice System Slice. [ 9.558248] random: systemd: uninitialized urandom read (16 bytes read) [ 9.558521] systemd[1]: Listening on Journal Audit Socket. [ 9.558766] random: systemd: uninitialized urandom read (16 bytes read) [ 9.559093] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.559472] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.559709] systemd[1]: Reached target User and Group Name Lookups. [ 9.602708] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 9.638351] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_0 [ 9.638351] [ 10.296950] using random self ethernet address [ 10.297089] using random host ethernet address [ 10.754577] using random self ethernet address [ 10.754719] using random host ethernet address [ 10.768212] random: crng init done [ 10.768323] random: 7 urandom warning(s) missed due to ratelimiting [ 11.394180] CPU4: shutdown [ 11.467186] CPU5: shutdown [ 11.529982] CPU6: shutdown [ 11.590402] CPU7: shutdown [ 13.419621] Bridge firewalling registered Ubuntu 18.04.5 LTS xavier ttyTCU0 xavier login: