[0000.095] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.103] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39) [0000.109] I> Boot-mode: Coldboot [0000.112] I> Chip revision : A02 [0000.115] I> Bootrom patch version : 15 (correctly patched) [0000.120] I> ATE fuse revision : 0x200 [0000.123] I> Ram repair fuse : 0x0 [0000.126] I> Ram Code : 0x0 [0000.129] I> rst_source : 0x0 [0000.132] I> rst_level : 0x0 [0000.135] I> Boot-device: eMMC [0000.150] I> sdmmc DDR50 mode [0000.154] W> No valid slot number is found in scratch register [0000.160] W> Return default slot: _a [0000.163] I> Active Boot chain : 0 [0000.166] I> Boot-device: eMMC [0000.170] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.178] I> Temperature = 40000 [0000.181] W> Skipping boost for clk: BPMP_CPU_NIC [0000.185] W> Skipping boost for clk: BPMP_APB [0000.189] W> Skipping boost for clk: AXI_CBB [0000.193] W> Skipping boost for clk: AON_CPU_NIC [0000.197] W> Skipping boost for clk: CAN1 [0000.201] W> Skipping boost for clk: CAN2 [0000.205] I> Boot-device: eMMC [0000.208] I> Boot-device: eMMC [0000.217] I> Sdmmc: HS400 mode enabled [0000.222] I> ECC region[0]: Start:0x0, End:0x0 [0000.226] I> ECC region[1]: Start:0x0, End:0x0 [0000.230] I> ECC region[2]: Start:0x0, End:0x0 [0000.234] I> ECC region[3]: Start:0x0, End:0x0 [0000.238] I> ECC region[4]: Start:0x0, End:0x0 [0000.242] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.248] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.253] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.257] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.262] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.267] E> FAILED: Thermal config [0000.274] E> FAILED: MEMIO rail config [0000.287] I> Boot-device: eMMC [0000.297] I> sdmmc bdev is already initialized [0000.369] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.377] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-feba5943) [0000.378] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.379] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.379] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.385] W> device prod register failed [0000.389] I> Boot-device: eMMC [0000.392] I> Boot_device: SDMMC_BOOT instance: 3 [0000.398] I> sdmmc-3 params source = boot args [0000.401] I> sdmmc bdev is already initialized [0000.405] I> sdmmc-3 params source = boot args [0000.413] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.420] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.421] W> No valid slot number is found in scratch register [0000.426] W> Return default slot: _a [0000.429] I> Active Boot chain : 0 [0000.433] I> parsing oem signed section of bpmp-fw header done [0000.438] I> bpmp-fw binary init read from storage [0000.443] I> oem authentication of bpmp-fw header done [0000.450] I> bpmp-fw binary done read from storage [0000.452] I> bpmp-fw: Authentication init Done [0000.457] I> parsing oem signed section of cpubl header done [0000.462] I> cpubl binary init read from storage [0000.467] I> bpmp-fw: Authentication Finalize Done [0000.471] I> oem authentication of cpubl header done [0000.476] I> cpubl binary done read from storage [0000.480] I> cpubl: Authentication init Done [0000.485] I> parsing oem signed section of rce header done [0000.490] I> rce binary init read from storage [0000.494] I> Relocating BR-BCT [0000.497] I> cpubl: Authentication Finalize Done [0000.502] I> oem authentication of rce header done [0000.506] I> rce binary done read from storage [0000.510] I> rce: Authentication init Done [0000.515] I> parsing oem signed section of ape header done [0000.520] I> ape binary init read from storage [0000.524] I> rce: Authentication Finalize Done [0000.529] I> oem authentication of ape header done [0000.533] I> ape binary done read from storage [0000.537] I> ape: Authentication init Done [0000.542] I> parsing oem signed section of tos header done [0000.547] I> tos binary init read from storage [0000.551] I> ape: Authentication Finalize Done [0000.556] I> oem authentication of tos header done [0000.560] I> tos binary done read from storage [0000.564] I> tos: Authentication init Done [0000.568] I> parsing oem signed section of bpmp-fw-dtb header done [0000.574] I> bpmp-fw-dtb binary init read from storage [0000.579] I> tos: Authentication Finalize Done [0000.585] I> oem authentication of bpmp-fw-dtb header done [0000.591] I> bpmp-fw-dtb binary done read from storage [0000.594] I> bpmp-fw-dtb: Authentication init Done [0000.599] I> parsing oem signed section of cpubl-dtb header done [0000.604] I> cpubl-dtb binary init read from storage [0000.609] I> bpmp-fw-dtb: Authentication Finalize Done [0000.646] I> oem authentication of cpubl-dtb header done [0000.647] I> cpubl-dtb binary done read from storage [0000.647] I> cpubl-dtb: Authentication init Done [0000.649] I> parsing oem signed section of eks header done [0000.650] I> eks binary init read from storage [0000.650] I> cpubl-dtb: Authentication Finalize Done [0000.651] I> oem authentication of eks header done [0000.655] I> eks binary done read from storage [0000.659] I> eks: Authentication init Done [0000.663] I> eks: Authentication Finalize Done [0000.667] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:38:54, Feb 19 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized �� ��mrq initialized ��[0001.133] I> Welcome to Cboot��fmon_post initialized �� [0001.133] I> Cboot Version: t194-9efcbc4f [0001.133] I> CPU-BL Params @ 0xf2820000 [0001.134] I> 0) Base:0x00000000 Size:0x00000000 [0001.138] I> 1) Base:0xf1100000 Size:0x00100000 [0001.142] I> 2) Base:0xf2000000 Size:0x00200000 [0001.147] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.151] I> 4) Base:0xf1000000 Size:0x00100000 [0001.231] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.235] I> 6) Base:0xf3800000 Size:0x00400000 [0001.239] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.244] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.248] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.253] I> 10) Base:0xf3000000 Size:0x00800000 [0001.257] I> 11) Base:0x40000000 Size:0x00040000 [0001.262] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.266] I> 13) Base:0x40046000 Size:0x00002000 [0001.271] I> 14) Base:0x40048000 Size:0x00002000 [0001.275] I> 15) Base:0xac000000 Size:0x00004000 ��emc_debugfs initialized dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.280] I> 16) Base:0x4004a000 Size:0x00002000 [0001.334] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.339] I> 18) Base:0x4004c000 Size:0x00002000 [0001.343] I> 19) Base:0xf2200000 Size:0x00600000 [0001.348] I> 20) Base:0x4004e000 Size:0x00002000 [0001.352] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.357] I> 22) Base:0x00000000 Size:0x00000000 [0001.361] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.366] I> 24) Base:0xf6000000 Size:0x02000000 [0001.370] I> 25) Base:0x40050000 Size:0x00002000 [0001.375] I> 26) Base:0x40040000 Size:0x00006000 [0001.379] I> 27) Base:0xf1800000 Size:0x00400000 [0001.384] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.388] I> 29) Base:0xf1400000 Size:0x00400000 [0001.392] I> 30) Base:0x00000000 Size:0x00000000 [0001.397] I> 31) Base:0x00000000 Size:0x00000000 [0001.401] I> 32) Base:0xf8000000 Size:0x08000000 [0001.406] I> 33) Base:0x00000000 Size:0x00000000 [0001.410] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.415] I> 35) Base:0xab000000 Size:0x01000000 [0001.419] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.424] I> 37) Base:0xf2800000 Size:0x00800000 [0001.428] I> 38) Base:0x80000000 Size:0x20000000 [0001.433] I> 39) Base:0xb0000000 Size:0x08000000 [0001.437] I> 40) Base:0x00000000 Size:0x00000000 [0001.442] I> 41) Base:0x00000000 Size:0x00000000 [0001.446] I> 42) Base:0x00000000 Size:0x00000000 [0001.450] I> 43) Base:0x00000000 Size:0x00000000 [0001.455] I> 44) Base:0x00000000 Size:0x00000000 [0001.459] I> 45) Base:0x00000000 Size:0x00000000 [0001.464] GIC-SPI Target CPU: 0 [0001.467] Interrupts Init done [0001.470] calling constructors [0001.473] initializing heap [0001.475] I> Heap: [0xa06945e8 ... 0xab000000] [0001.480] initializing threads [0001.482] initializing timers [0001.485] creating bootstrap completion thread [0001.490] top of bootstrap2() [0001.492] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.497] initializing platform [0001.500] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.505] W> device prod register failed [0001.509] I> Bl_dtb @0xaaf00000 [0001.516] W> "plugin-manager" doesn't exist, creating [0001.517] W> "ids" doesn't exist, creating [0001.521] W> "connection" doesn't exist, creating [0001.526] W> "configs" doesn't exist, creating [0001.538] I> Find /i2c@3160000's alias i2c0 [0001.539] I> Reading eeprom i2c=0 address=0x50 [0001.564] I> Device at /i2c@3160000:0x50 [0001.565] I> Reading eeprom i2c=0 address=0x56 [0001.589] I> Device at /i2c@3160000:0x56 [0001.591] I> Find /i2c@3180000's alias i2c2 [0001.591] I> Reading eeprom i2c=2 address=0x54 [0001.593] E> I2C: slave not found in slaves. [0001.593] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.594] E> I2C_DEV: Failed to send register address 0x00000000. [0001.595] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.603] E> eeprom: Failed to read I2C slave device [0001.608] I> Eeprom read failed 0x3526070d [0001.612] I> Reading eeprom i2c=2 address=0x57 [0001.616] E> I2C: slave not found in slaves. [0001.620] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.628] E> I2C_DEV: Failed to send register address 0x00000000. [0001.634] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.643] E> eeprom: Failed to read I2C slave device [0001.648] I> Eeprom read failed 0x3526070d [0001.652] I> Reading eeprom i2c=2 address=0x52 [0001.656] E> I2C: slave not found in slaves. [0001.660] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.668] E> I2C_DEV: Failed to send register address 0x00000000. [0001.674] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.683] E> eeprom: Failed to read I2C slave device [0001.688] I> Eeprom read failed 0x3526070d [0001.693] I> Find /i2c@c240000's alias i2c1 [0001.696] I> Reading eeprom i2c=1 address=0x52 [0001.702] E> I2C: slave not found in slaves. [0001.704] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.712] E> I2C_DEV: Failed to send register address 0x00000000. [0001.718] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.727] E> eeprom: Retry to read I2C slave device. [0001.732] E> I2C: slave not found in slaves. [0001.736] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.744] E> I2C_DEV: Failed to send register address 0x00000000. [0001.750] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.759] E> eeprom: Failed to read I2C slave device [0001.764] I> Eeprom read failed 0x3526070d [0001.768] I> Reading eeprom i2c=1 address=0x50 [0001.772] E> I2C: slave not found in slaves. [0001.776] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.784] E> I2C_DEV: Failed to send register address 0x00000000. [0001.790] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.799] E> eeprom: Retry to read I2C slave device. [0001.804] E> I2C: slave not found in slaves. [0001.808] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.816] E> I2C_DEV: Failed to send register address 0x00000000. [0001.821] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.831] E> eeprom: Failed to read I2C slave device [0001.836] I> Eeprom read failed 0x3526070d [0001.840] I> create_pm_ids: id: 2888-0001-400-L, len: 15 [0001.845] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.856] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0001.861] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.872] I> Adding plugin-manager/ids/2888-0001-400=/i2c@3160000:module@0x50 [0001.880] W> "i2c@3160000" doesn't exist, creating [0001.884] W> "module@0x50" doesn't exist, creating [0001.889] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0001.896] W> "module@0x56" doesn't exist, creating [0001.902] I> Adding plugin-manager/cvm [0001.904] W> "chip-id" doesn't exist, creating [0001.908] I> Adding plugin-manager/chip-id/A02 [0001.912] I> Plugin-manager override starting [0001.917] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.926] I> node /plugin-manager/fragement-soft-wdt matches [0001.936] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.941] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.952] I> Disable plugin-manager status in FDT [0001.953] I> Plugin-manager override finished successfully [0001.953] I> gpio framework initialized [0001.955] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.962] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.968] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.976] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.984] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.990] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.996] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.004] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.012] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.018] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.026] I> fixed regulator driver initialized [0002.039] I> register 'maxim' power off handle [0002.040] I> virtual i2c enabled [0002.040] I> registered 'maxim,max20024' pmic [0002.040] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.046] I> Boot-device: eMMC [0002.049] I> Boot_device: SDMMC_BOOT instance: 3 [0002.058] I> sdmmc-3 params source = boot args [0002.058] I> create_pm_ids: id: 2888-0001-400-L, len: 15 [0002.063] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.074] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0002.079] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.090] I> sdmmc bdev is already initialized [0002.095] I> sdmmc-3 params source = boot args [0002.125] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.138] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.147] I> enabling 'vdd-hdmi-5v0' regulator [0002.152] I> regulator 'vdd-hdmi-5v0' already enabled [0002.153] I> hdmi cable connected [0002.155] W> set volts not configured for 'vdd-1v0' [0002.157] W> set volts not configured for 'vdd-1v8-hs' [0002.161] E> invalid display type [0002.165] E> invalid display type [0002.166] E> cannot find any other nvdisp nodes [0002.182] I> edid read success [0002.194] I> edid read success [0002.194] I> width = 640, height = 480, frequency = 25174825 [0002.195] I> width = 2560, height = 1440, frequency = 241500000 [0002.195] I> width = 1920, height = 1080, frequency = 148500000 [0002.196] I> width = 640, height = 480, frequency = 25174825 [0002.196] I> width = 720, height = 480, frequency = 26973026 [0002.200] I> width = 720, height = 480, frequency = 26973026 [0002.206] I> width = 1280, height = 720, frequency = 74175824 [0002.211] I> width = 1280, height = 720, frequency = 74175824 [0002.217] I> width = 1920, height = 1080, frequency = 148351648 [0002.223] I> width = 1920, height = 1080, frequency = 148351648 [0002.228] I> width = 720, height = 576, frequency = 26973026 [0002.234] I> width = 720, height = 576, frequency = 26973026 [0002.239] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.249] I> hdmi_enable, starting HDMI initialisation [0002.255] I> hdmi_enable, HDMI initialisation complete [0002.265] I> Load in CBoot Boot Options partition and parse it [0002.271] E> Error -9 when finding node with path /boot-configuration [0002.272] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.275] I> Using default boot order [0002.278] I> boot-dev-order :- [0002.281] I> 1.sd [0002.283] I> 2.usb [0002.285] I> 3.nvme [0002.287] I> 4.emmc [0002.289] I> 5.net [0002.291] I> Hit any key to stop autoboot: 4 3 2 1 [0004.298] initializing target [0004.298] calling apps_init() [0004.299] starting app kernel_boot_app [0004.318] I> found decompressor handler: lz4-legacy [0004.319] I> decompressing BMP blob ... [0004.330] I> Kernel type = Normal [0004.330] I> Loading kernel-bootctrl from partition [0004.330] I> Loading partition kernel-bootctrl at 0xa4ad0000 from device(0x1) [0004.337] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.338] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.338] I> ########## SD (0) boot ########## [0004.339] I> No sdcard [0004.340] I> -0 params source = [0004.343] E> Blockdev open: exit error [0004.347] E> SD boot failed, err: 724238353 [0004.351] I> ########## USB (0) boot ########## [0004.360] W> No valid slot number is found in scratch register [0004.361] W> Return default slot: _a [0004.377] I> USB Firmware Version: 60.06 release [0004.432] I> regulator of usb2-0 already enabled [0004.440] I> regulator of usb2-1 already enabled [0004.447] I> regulator of usb2-2 already enabled [0004.457] I> enabling 'vdd-5v-sata' regulator [0005.525] I> USB 2.0 port 2 new full-speed USB device detected [0005.526] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa9ad0000, cmd_ring.dma = 0xa9ad0040 [0005.627] I> Start to enumerate device [0005.628] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa9ad0000, cmd_ring.dma = 0xa9ad0040 [0005.632] I> This device is non-MSD, skip enumeration [0005.633] E> Failed to enumerate USB device [0005.633] E> failed to start xhci controller [0005.633] E> Error in init of XUSB host driver, err: 7979000d [0005.634] W> Failed to initialize device 5-0 [0005.638] E> USB boot failed, err: 2037973005 [0005.642] I> ########## Fixed storage boot ########## [0005.653] I> Already published: 00010003 [0005.653] I> Look for boot partition [0005.654] I> Fallback: assuming 0th partition is boot partition [0005.660] I> Detect filesystem [0005.687] I> Loading extlinux.conf ... [0005.687] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.718] I> L4T boot options [0005.718] I> [1]: "primary kernel" [0005.719] I> Enter choice: [0008.720] I> Continuing with default option: 1 [0008.720] I> Loading kernel sig file from rootfs ... [0008.720] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.739] I> Loading kernel binary from rootfs ... [0008.739] I> rootfs path: /sdmmc_user/boot/Image [0008.980] I> Validate kernel ... [0008.980] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.291] I> Encryption fuse is not ON [0009.308] I> No kernel-dtb binary path [0009.308] W> No valid slot number is found in scratch register [0009.309] W> Return default slot: _a [0009.309] I> A/B: bin_type (38) slot 0 [0009.309] I> Loading kernel-dtb from partition [0009.310] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0009.319] I> Validate kernel-dtb ... [0009.319] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.323] I> Encryption fuse is not ON [0009.325] I> Loading ramdisk from rootfs ... [0009.328] I> Loading initrd sig file from rootfs ... [0009.333] I> rootfs path: /sdmmc_user/boot/initrd.sig [0015.539] I> lookup_linear_dir:447: Invalid file block num [0015.539] I> ext2_walk:142: 'initrd.sig' lookup failed [0015.540] I> ext4_open_file:666: '/boot/initrd.sig' lookup failed [0015.540] E> file /sdmmc_user/boot/initrd.sig open failed!! [0015.541] W> Failed to load initrd sig file (err=202113041) [0015.541] I> Loading initrd binary from rootfs ... [0015.546] I> rootfs path: /sdmmc_user/boot/initrd [0015.606] I> Validate initrd ... [0015.607] I> T19x: Authenticate initrd (bin_type: 49), max size 0x4000000 [0015.607] E> Stage2Signature validation failed with SHA2!! [0015.608] C> OEM authentication of initrd header failed! [0015.608] W> Failed to validate initrd binary (err=1077936152, fail=1) [0015.609] W> Security fuse not burned, ignore validation failure [0015.615] I> Kernel hdr @0xa4ad0000 [0015.617] I> Kernel dtb @0x90000000 [0015.620] I> decompressor handler not found [0015.625] I> Copying kernel image (34179088 bytes) from 0xa4ad0000 to 0x80080000 ... [0015.642] I> Done [0015.642] I> Updated bpmp info to DTB [0015.644] I> Ramdisk: Base: 0x92000000; Size: 0x54e934 [0015.644] I> Updated initrd info to DTB [0015.646] W> WARN: Fail to override "console=none" in commandline [0015.652] I> Active rootfs suffix: [0015.655] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0015.662] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0015.670] W> No valid slot number is found in scratch register [0015.675] W> Return default slot: _a [0015.679] I> Active slot suffix: [0015.682] I> add_boot_slot_suffix: slot_suffix = [0015.687] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06a0000 lut_mem=0x2008@0x [0015.718] I> Updated bootarg info to DTB [0015.722] W> MAC addr invalid! [0015.725] E> Failed to get WIFI MAC address [0015.729] W> MAC addr invalid! [0015.731] E> Failed to get Bluetooth MAC address [0015.736] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:78:d7 [0015.743] W> "plugin-manager" doesn't exist, creating [0015.747] I> Adding /chosen/plugin-manager/cvm [0015.751] W> "chip-id" doesn't exist, creating [0015.755] I> Adding /chosen/plugin-manager/chip-id [0015.760] W> "configs" doesn't exist, creating [0015.764] I> Adding /chosen/plugin-manager/configs [0015.769] W> "ids" doesn't exist, creating [0015.773] I> Adding /chosen/plugin-manager/ids [0015.778] W> "odm-data" doesn't exist, creating [0015.782] I> Adding /chosen/plugin-manager/odm-data [0015.789] W> "memory" doesn't exist, creating [0015.791] I> [0] START: 0x80000000, END: 0xac000000 [0015.795] I> [1] START: 0xac004000, END: 0xf0ad0000 [0015.800] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0015.805] I> dram_block larger than 80000000 [0015.809] I> [3] START: 0x100000000, END: 0x480000000 [0015.814] I> added [base:0x80000000, size:0x2c000000] to /memory [0015.820] I> added [base:0xac200000, size:0x44800000] to /memory [0015.825] I> added [base:0x100000000, size:0x380000000] to /memory [0015.832] I> Updated memory info to DTB [0015.835] E> add_disp_param: failed to get display params for du=1 [0015.842] W> "reset" doesn't exist, creating [0015.846] I> Adding ecid(000000016459958220000000160381c0) to DT [0015.851] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0015.856] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0015.861] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0015.865] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0015.870] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0015.875] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0015.879] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0015.884] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0015.890] W> "misc-data" doesn't exist, creating [0015.893] I> Boot-device: eMMC [0015.896] I> Add boot-sdmmc to plugin-manager/misc-data [0015.902] I> Add storage-sdmmc to plugin-manager/misc-data [0015.907] W> Unknown storage device [0015.911] I> Add serial number:0421419020837 as DT property [0015.917] I> Plugin-manager override starting [0015.920] I> node /plugin-manager/fragement-tegra-wdt-en matches [0015.927] I> node /plugin-manager/fragement-soft-wdt matches [0015.935] I> node /plugin-manager/fragment-pcie-c5-rp matches [0015.939] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0015.952] I> Disable plugin-manager status in FDT [0015.952] I> Plugin-manager override finished successfully [0015.953] I> tegrabl_load_kernel_and_dtb: Done [0015.975] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1895) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SM9 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06a0000 [ 0.000000] Found lut_mem: 00002008@a069b000 ��WARNING: pll_d3 has no dyn ramp WARNING: at platform/drivers/mailbox/mail_mach.c:148 WARNING: at platform/drivers/mailbox/mail_mach.c:161 WARNING: at platform/drivers/mailbox/mail_mach.c:177 WARNING: at platform/drivers/mailbox/mail_mach.c:161 WARNING: at platform/drivers/mailbox/mail_mach.c:177