[0000.062] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0000.067] I> t234-A01-0-Silicon (0x12347) Prod [0000.072] I> Boot-mode : Coldboot [0000.075] I> Emulation: [0000.077] I> Entry timestamp: 0x00000000 [0000.081] I> last_boot_error: 0x0 [0000.084] I> BR-BCT: preprod_dev_sign: 0 [0000.088] I> rst_source: 0x0, rst_level: 0x0 [0000.092] I> Task: Bootchain select WAR set (0x5000ba65) [0000.097] I> Task: Enable SLCG (0x5000bab1) [0000.101] I> Task: CRC check (0x5001ea19) [0000.105] I> Skip FUSE records CRC check as records_integrity fuse is not burned [0000.112] I> Task: Initialize MB2 params (0x5000cb51) [0000.118] I> MB2-params @ 0x40060000 [0000.121] I> Task: Crypto init (0x5001d981) [0000.125] I> Task: Secure debug controls (0x5000c0a9) [0000.130] I> Task: strap war set (0x5000ba2d) [0000.134] I> Task: Initialize SOC Therm (0x5001bd35) [0000.139] I> Task: Program NV master stream id (0x5000c05d) [0000.145] I> Task: Verify boot mode (0xd4820f1) [0000.150] I> Task: Alias fuses (0x5001095d) [0000.155] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.162] I> Task: Print SKU type (0x5000f5f1) [0000.166] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.171] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.175] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.180] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.184] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.188] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.193] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.197] I> FUSE_OPT_FSI_DISABLE = 0x00000000 [0000.201] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.206] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.210] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.214] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.218] I> FUSE_SKU_INFO_0 = 0xd0 [0000.221] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.225] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.229] I> SKU: Prod [0000.231] I> Task: Boost clocks (0x500148a1) [0000.235] I> Initializing PLLC2 for AXI_CBB. [0000.240] I> AXI_CBB : src = 35, divisor = 0 [0000.244] I> Task: Voltage monitor (0x50014b49) [0000.248] I> VMON: Vmon re-calibration and fine tuning done [0000.253] I> Task: UPHY init (0x5000d065) [0000.259] I> HSIO UPHY init done [0000.262] E> Skipping GBE UPHY config [0000.266] I> Task: Boot device init (0x50000be9) [0000.271] I> Boot_device: QSPI_FLASH instance: 0 [0000.275] I> Qspi clock source : pllc_out0 [0000.279] I> QSPI Flash: Macronix 64MB [0000.283] I> QSPI-0l initialized successfully [0000.287] I> Task: TSC init (0x50020a4d) [0000.291] I> Task: Load membct (0x50011fe9)om 2.8 | VT102 | Offline | ttyACM0 [0000.295] I> RAM_CODE 0x4000401 [0000.298] I> Loading MEMBCT [0000.301] I> Slot: 0 [0000.303] I> Binary[0] block-0 (partition size: 0x40000) [0000.308] I> get_binary_info: Binary name: MEM-BCT-0 [0000.313] I> Size of crypto header is 8192 [0000.317] I> BCH load address is : 0x40050000 [0000.321] I> Size of crypto header is 8192 [0000.325] I> BCH of MEM-BCT-0 read from storage [0000.329] I> BCH address is : 0x40050000 [0000.333] I> MEM-BCT-0 header integrity check is success [0000.339] I> Binary magic in BCH component 0 is MEM0 [0000.343] I> component binary type is 0 [0000.348] I> MEM-BCT-0 binary is read from storage [0000.353] I> MEM-BCT-0 binary integrity check is success [0000.358] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.364] I> RAM_CODE 0x4000401 [0000.370] I> RAM_CODE 0x4000401 [0000.373] I> Task: Load Page retirement list (0x500115b1) [0000.379] I> Task: SDRAM params override (0x50011fc5) [0000.384] I> Task: Save mem-bct info (0x50014fa1) [0000.388] I> Task: Carveout allocate (0x50015005) [0000.393] I> RCM blob carveout will not be allocated [0000.397] I> ECC region[0]: Start:0x0, End:0x0 [0000.402] I> ECC region[1]: Start:0x0, End:0x0 [0000.406] I> ECC region[2]: Start:0x0, End:0x0 [0000.410] I> ECC region[3]: Start:0x0, End:0x0 [0000.415] I> ECC region[4]: Start:0x0, End:0x0 [0000.419] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.425] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.429] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.434] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.439] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.448] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.455] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.463] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0000.470] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0000.477] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.484] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.491] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.498] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.505] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0000.512] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0000.519] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.526] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0000.533] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0000.540] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0000.547] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0000.554] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0000.560] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0000.567] I> allocated(CO:23) base:0x832000000 size:0x200000 align: 0x200000 [0000.574] I> allocated(CO:01) base:0x82f700000 size:0x100000 align: 0x100000 [0000.581] I> allocated(CO:04) base:0x82f600000 size:0x100000 align: 0x100000 [0000.588] I> allocated(CO:05) base:0x82f500000 size:0x100000 align: 0x100000 [0000.595] I> allocated(CO:08) base:0x82f400000 size:0x100000 align: 0x100000 [0000.602] I> allocated(CO:09) base:0x82f300000 size:0x100000 align: 0x100000 [0000.609] I> allocated(CO:15) base:0x82f200000 size:0x100000 align: 0x100000 [0000.616] I> allocated(CO:17) base:0x82f100000 size:0x100000 align: 0x100000 [0000.623] I> allocated(CO:27) base:0x82f000000 size:0x100000 align: 0x100000 [0000.630] I> allocated(CO:42) base:0x82ef00000 size:0x100000 align: 0x100000 [0000.637] I> allocated(CO:54) base:0x82ee80000 size:0x80000 align: 0x80000 [0000.643] I> allocated(CO:34) base:0x82ee70000 size:0x10000 align: 0x10000 [0000.650] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0000.657] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0000.664] I> allocated(CO:48) base:0x82ee50000 size:0x20000 align: 0x10000 [0000.671] I> allocated(CO:69) base:0x82ee30000 size:0x20000 align: 0x10000 [0000.677] I> allocated(CO:49) base:0x82ee20000 size:0x10000 align: 0x10000 [0000.684] I> allocated(CO:50) base:0x82ee10000 size:0x10000 align: 0x10000 [0000.691] I> allocated(CO:52) base:0x82ee00000 size:0x10000 align: 0x10000 [0000.698] I> NSDRAM base: 0x80000000, end: 0x82ee70000 [0000.703] I> Task: Thermal check (0x50021d55) [0000.707] I> max_chip_limit = 105 [0000.710] I> min_chip_limit = -28 [0000.713] I> max temp read = 30 [0000.716] I> min temp read = 27 [0000.719] I> Task: Update FSI SCR with thermal fuse data (0x50021e61) [0000.725] I> Task: Enable WDT 5th expiry (0x50021a41) [0000.730] I> Task: I2C register (0x50000b85) [0000.734] I> Task: Reset FSI (0x500148b1) [0000.738] I> Task: Pinmux init (0x5001397d) [0000.743] I> Task: Prod config init (0x50013ddd) [0000.747] I> Task: Pad voltage init (0x50013a2d) [0000.752] I> Task: Prod init (0x50013e21) [0000.756] I> Task: Common rail init (0x50014575) [0000.760] I> DONE: Thermal config [0000.764] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.773] I> DONE: SOC rail config [0000.776] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.783] I> DONE: MEMIO rail config [0000.786] I> DONE: GPU rail info [0000.789] I> DONE: CV rail info [0000.792] I> Task: Mem clock src (0x50011de9) [0000.796] I> Task: Misc. board config (0x5001461d) [0000.801] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.807] I> Task: SDRAM init (0x50011ded) [0000.811] I> SDRAM-params @ 0xd485000 [0000.815] I> MemoryType: 4 MemBctRevision: 9 [0000.821] I> MSS code-drop: NvBootSdramInit [0000.825] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.833] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.840] I> MSS CAR: Init PLLM [0000.843] I> MSS CAR: Init PLLHUB [0000.848] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.860] I> mb1_sdram_init Done ! [0000.863] I> SDRAM Size in Total 0x800000000 [0000.867] I> Task: Dram Ecc scrub (0x500116f5) [0000.871] I> Task: DRAM alias check (0x50011fbd) [0000.903] I> Task: Program NSDRAM carveout (0x50015961) [0000.910] I> NSDRAM carveout encryption is enabled [0000.915] I> Program NSDRAM carveout [0000.919] I> Task: Register checker (0x50011fc1) [0000.927] I> Task: Enable clock-mon (0x50020a35) [0000.944] I> FMON: Fmon re-programming done [0000.948] I> Task: Mapper init (0x5001ef4d) [0000.953] I> Task: SC7 Context Init (0x50020d3d) [0000.959] I> Task: CCPLEX IST init (0x5000c925) [0000.965] I> Task: CPU WP0 (0x5000bb15) [0000.970] I> Loading MCE [0000.973] I> Slot: 0 [0000.975] I> Binary[8] block-0 (partition size: 0x80000) [0000.981] I> get_binary_info: Binary name: MCE [0000.986] I> Size of crypto header is 8192 [0000.991] I> BCH load address is : 0x4003e000 [0000.996] I> Size of crypto header is 8192 [0001.001] I> BCH of MCE read from storage [0001.005] I> BCH address is : 0x4003e000 [0001.010] I> MCE header integrity check is success [0001.015] I> Binary magic in BCH component 0 is MTSM [0001.021] I> component binary type is 8 [0001.025] I> Size of crypto header is 8192 [0001.031] I> MCE binary is read from storage [0001.037] I> MCE binary integrity check is success [0001.042] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.049] I> Size of crypto header is 8192 [0001.063] I> Size of crypto header is 8192 [0001.068] I> Sending WP0 mailbox command to PSC [0001.079] I> Task: XUSB Powergate (0x50000b91) [0001.084] I> Skipping powergate XUSB. [0001.088] I> Task: MB1 fixed firewalls (0x5002006d) [0001.099] W> Firewall readback mismatch [0001.103] W> Firewall readback mismatch [0001.112] W> Firewall readback mismatch [0001.122] I> Task: Load bpmp-fw (0x500203c9) [0001.127] I> Slot: 0 [0001.130] I> Binary[15] block-0 (partition size: 0x180000) [0001.136] I> get_binary_info: Binary name: BPMP_FW [0001.141] I> Size of crypto header is 8192 [0001.146] I> BCH load address is : 0x807fe000 [0001.151] I> Size of crypto header is 8192 [0001.156] I> BCH of BPMP_FW read from storage [0001.160] I> BCH address is : 0x807fe000 [0001.166] I> BPMP_FW header integrity check is success [0001.171] I> Binary magic in BCH component 0 is BPMF [0001.176] I> component binary type is 15 [0001.181] I> Size of crypto header is 8192 [0001.196] I> BPMP_FW binary is read from storage [0001.203] I> BPMP_FW binary integrity check is success [0001.209] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfddc0) [0001.217] I> Slot: 0 [0001.219] I> Binary[16] block-10000 (partition size: 0x400000) [0001.226] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.231] I> Size of crypto header is 8192 [0001.236] I> BCH load address is : 0x807fc000 [0001.241] I> Size of crypto header is 8192 [0001.246] I> BCH of BPMP_FW_DTB read from storage [0001.251] I> BCH address is : 0x807fc000 [0001.256] I> BPMP_FW_DTB header integrity check is success [0001.262] I> Binary magic in BCH component 0 is BPMD [0001.267] I> component binary type is 16 �i%/?�a�HH� i+'���FD�#a�Ň�ą���内��D���DD�#a�Ň�ć��Ĥ��ą���E���FD����$@`! ć�������Ƅ�Ć�Ņ�ą��b����FD���℄���������b���DD����D��ED���ŃE���Ą���Ň�ą��b���ED�����f��������!#A��ED���䅥��Ą�����E��ED �愄 �䅥 �内 �愥 �䄄 �䅥 �椆 Ǥ䅅 �椆愥 �愄 �䅤 �䄆 �䅥 �愄 �䅥 Ǥ䅅 �䅥 �内 �䅥 �愤 �䇄 �䅥 �䅥 �椆 Ǥ䅅 �椆愥 �愄 �䅥 �䅥 �愄 �䅥 �内 �䄆 �愥 �䄄 �䅥 �椆 Ǥ䅅 �椆愥 � Jetson UEFI firmware (version 3.1-32827747 built on 2023-03-19T14:56:32+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map...