0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.059] I> rst_source : 0x0 [0000.061] I> rst_level : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.072] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] W> No valid slot number is found in scratch register [0000.091] W> Return default slot: _a [0000.094] I> Active Boot chain : 0 [0000.097] I> Boot-device: QSPI [0000.100] I> Qspi flash params source = brbct [0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.113] I> Temperature = 38000 [0000.117] W> Skipping boost for clk: BPMP_CPU_NIC [0000.121] W> Skipping boost for clk: BPMP_APB [0000.125] W> Skipping boost for clk: AXI_CBB [0000.129] W> Skipping boost for clk: AON_CPU_NIC [0000.133] W> Skipping boost for clk: CAN1 [0000.137] W> Skipping boost for clk: CAN2 [0000.141] I> Boot-device: QSPI [0000.144] I> Boot-device: QSPI [0000.147] I> Qspi flash params source = mb1bct [0000.151] I> Qspi using bpmp-dma [0000.154] I> Qspi clock source : pllc_out0 [0000.158] I> Qspi reinitialized [0000.160] I> Qspi flash params source = mb1bct [0000.166] I> ECC region[0]: Start:0x0, End:0x0 [0000.170] I> ECC region[1]: Start:0x0, End:0x0 [0000.174] I> ECC region[2]: Start:0x0, End:0x0 [0000.178] I> ECC region[3]: Start:0x0, End:0x0 [0000.182] I> ECC region[4]: Start:0x0, End:0x0 [0000.187] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.192] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.206] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.211] E> FAILED: Thermal config [0000.218] E> FAILED: MEMIO rail config [0000.229] I> Boot-device: QSPI [0000.232] I> Qspi flash params source = mb1bct [0000.241] I> Qspi flash params source = mb1bct [0000.252] I> Qspi flash params source = mb1bct [0000.319] I> Qspi flash params source = mb1bct [0000.328] I> Qspi flash params source = mb1bct [0000.355] I> Qspi flash params source = mb1bct [0000.367] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.375] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4) [0000.376] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.376] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.377] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.383] W> device prod register failed [0000.387] I> Boot-device: QSPI [0000.389] I> Boot_device: QSPI_FLASH instance: 0 [0000.395] I> QSPI Flash Size = 32 MB [0000.400] I> Qspi initialized successfully [0000.401] I> qspi flash-0 params source = boot args �� [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0x0 [0000.061] I> rst_level : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.071] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] W> No valid slot number is found in scratch register [0000.091] W> Return default slot: _a [0000.094] I> Active Boot chain : 0 [0000.097] I> Boot-device: QSPI [0000.100] I> Qspi flash params source = brbct [0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.113] I> Temperature = 38000 [0000.116] W> Skipping boost for clk: BPMP_CPU_NIC [0000.121] W> Skipping boost for clk: BPMP_APB [0000.125] W> Skipping boost for clk: AXI_CBB [0000.129] W> Skipping boost for clk: AON_CPU_NIC [0000.133] W> Skipping boost for clk: CAN1 [0000.137] W> Skipping boost for clk: CAN2 [0000.141] I> Boot-device: QSPI [0000.144] I> Boot-device: QSPI [0000.147] I> Qspi flash params source = mb1bct [0000.151] I> Qspi using bpmp-dma [0000.154] I> Qspi clock source : pllc_out0 [0000.158] I> Qspi reinitialized [0000.160] I> Qspi flash params source = mb1bct [0000.166] I> ECC region[0]: Start:0x0, End:0x0 [0000.170] I> ECC region[1]: Start:0x0, End:0x0 [0000.174] I> ECC region[2]: Start:0x0, End:0x0 [0000.178] I> ECC region[3]: Start:0x0, End:0x0 [0000.182] I> ECC region[4]: Start:0x0, End:0x0 [0000.187] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.192] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.206] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.211] E> FAILED: Thermal config [0000.218] E> FAILED: MEMIO rail config [0000.229] I> Boot-device: QSPI [0000.232] I> Qspi flash params source = mb1bct [0000.241] I> Qspi flash params source = mb1bct [0000.252] I> Qspi flash params source = mb1bct [0000.319] I> Qspi flash params source = mb1bct [0000.328] I> Qspi flash params source = mb1bct [0000.355] I> Qspi flash params source = mb1bct [0000.367] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.375] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4) [0000.376] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.377] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.377] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.383] W> device prod register failed [0000.387] I> Boot-device: QSPI [0000.390] I> Boot_device: QSPI_FLASH instance: 0 [0000.395] I> QSPI Flash Size = 32 MB [0000.401] I> Qspi initialized successfully [0000.402] I> qspi flash-0 params source = boot args [0000.787] I> sdmmc DDR50 mode [0000.789] I> sdmmc-3 params source = safe params [0000.793] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.795] W> Cannot find any partition table for 00000003 [0000.798] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.799] W> No valid slot number is found in scratch register [0000.799] W> Return default slot: _a [0000.800] I> Active Boot chain : 0 [0000.801] I> parsing oem signed section of bpmp-fw header done [0000.804] I> bpmp-fw binary init read from storage [0000.809] I> oem authentication of bpmp-fw header done [0000.��� [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0x0 [0000.061] I> rst_level : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.072] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] W> No valid slot number is found in scratch register [0000.091] W> Return default slot: _a [0000.094] I> Active Boot chain : 0 [0000.097] I> Boot-device: QSPI [0000.100] I> Qspi flash params source = brbct [0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.113] I> Temperature = 38500 [0000.117] W> Skipping boost for clk: BPMP_CPU_NIC [0000.121] W> Skipping boost for clk: BPMP_APB [0000.125] W> Skipping boost for clk: AXI_CBB [0000.129] W> Skipping boost for clk: AON_CPU_NIC [0000.133] W> Skipping boost for clk: CAN1 [0000.137] W> Skipping boost for clk: CAN2 [0000.141] I> Boot-device: QSPI [0000.144] I> Boot-device: QSPI [0000.147] I> Qspi flash params source = mb1bct [0000.151] I> Qspi using bpmp-dma [0000.154] I> Qspi clock source : pllc_out0 [0000.158] I> Qspi reinitialized [0000.160] I> Qspi flash params source = mb1bct [0000.166] I> ECC region[0]: Start:0x0, End:0x0 [0000.170] I> ECC region[1]: Start:0x0, End:0x0 [0000.174] I> ECC region[2]: Start:0x0, End:0x0 [0000.178] I> ECC region[3]: Start:0x0, End:0x0 [0000.182] I> ECC region[4]: Start:0x0, End:0x0 [0000.187] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.192] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.206] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.211] E> FAILED: Thermal config [0000.218] E> FAILED: MEMIO rail config [0000.229] I> Boot-device: QSPI [0000.232] I> Qspi flash params source = mb1bct [0000.241] I> Qspi flash params source = mb1bct [0000.252] I> Qspi flash params source = mb1bct [0000.319] I> Qspi flash params source = mb1bct [0000.328] I> Qspi flash params source = mb1bct [0000.355] I> Qspi flash params source = mb1bct [0000.367] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.375] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4) [0000.376] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.376] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.377] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.383] W> device prod register failed [0000.387] I> Boot-device: QSPI [0000.389] I> Boot_device: QSPI_FLASH instance: 0 [0000.395] I> QSPI Flash Size = 32 MB [0000.400] I> Qspi initialized successfully [0000.401] I> qspi flash-0 params source = boot args [0000.787] I> sdmmc DDR50 mode [0000.789] I> sdmmc-3 params source = safe params [0000.792] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.795] W> Cannot find any partition table for 00000003 [0000.797] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.798] W> No valid slot number is found in scratch register [0000.799] W> Return default slot: _a [0000.799] I> Active Boot chain : 0 [0000.800] I> parsing oem signed section of bpmp-fw header done [0000.803] I> bpmp-fw binary init read from storage [0000.808] I> oem authentication of bpmp-fw header done [0000.822] I> bpmp-fw binary done read from storage [0000.823] I> bpmp-fw: Authentication init Done [0000.824] I> parsing oem signed section of cpubl header done [0000.827] I> cpubl binary init read from storage [0000.832] I> bpmp-fw: Authentication Finalize Done [0000.836] I> oem authentication of cpubl header done [0000.844] I> cpubl binary done read from storage [0000.846] I> cpubl: Authentication init Done [0000.850] I> parsing oem signed section of rce header done [0000.855] I> rce binary init read from storage [0000.860] I> Relocating BR-BCT [0000.862] I> cpubl: Authentication Finalize Done [0000.867] I> oem authentication of rce header done [0000.872] I> rce binary done read from storage [0000.876] I> rce: Authentication init Done [0000.880] I> parsing oem signed section of ape header done [0000.885] I> ape binary init read from storage [0000.889] I> rce: Authentication Finalize Done [0000.894] I> oem authentication of ape header done [0000.898] I> ape binary done read from storage [0000.902] I> ape: Authentication init Done [0000.907] I> parsing oem signed section of tos header done [0000.912] I> tos binary init read from storage [0000.916] I> ape: Authentication Finalize Done [0000.921] I> oem authentication of tos header done [0000.927] I> tos binary done read from storage [0000.929] I> tos: Authentication init Done [0000.933] I> parsing oem signed section of bpmp-fw-dtb header done [0000.939] I> bpmp-fw-dtb binary init read from storage [0000.944] I> tos: Authentication Finalize Done [0000.950] I> oem authentication of bpmp-fw-dtb header done [0000.954] I> bpmp-fw-dtb binary done read from storage [0000.959] I> bpmp-fw-dtb: Authentication init Done [0000.964] I> parsing oem signed section of cpubl-dtb header done [0000.969] I> cpubl-dtb binary init read from storage [0000.974] I> bpmp-fw-dtb: Authentication Finalize Done [0001.020] I> oem authentication of cpubl-dtb header done [0001.021] I> cpubl-dtb binary done read from storage [0001.021] I> cpubl-dtb: Authentication init Done [0001.022] I> parsing oem signed section of eks header done [0001.023] I> eks binary init read from storage [0001.024] I> cpubl-dtb: Authentication Finalize Done [0001.024] I> oem authentication of eks header done [0001.029] I> eks binary done read from storage [0001.033] I> eks: Authentication init Done [0001.037] I> eks: Authentication Finalize Done [0001.041] I> EKB detected (length: 0x410) @ VA:0x52714400 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.383] I> Welcome to Cboot ��WARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ��[0001.383] I> Cboot Version: t194-18fdfe28 [0001.385] I> CPU-BL Params @ 0xf2820000 [0001.389] I> 0) Base:0x00000000 Size:0x00000000 [0001.394] I> 1) Base:0xf1100000 Size:0x00100000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.398] I> 2) Base:0xf2000000 Size:0x00200000 [0001.578] I> 3) Base:0xf1200000 Size:0x00200000 [0001.582] I> 4) Base:0xf1000000 Size:0x00100000 [0001.587] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.591] I> 6) Base:0xf3800000 Size:0x00400000 [0001.596] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.600] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.604] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.609] I> 10) Base:0xf3000000 Size:0x00800000 [0001.613] I> 11) Base:0x40000000 Size:0x00040000 [0001.618] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.622] I> 13) Base:0x40046000 Size:0x00002000 [0001.627] I> 14) Base:0x40048000 Size:0x00002000 [0001.631] I> 15) Base:0xac000000 Size:0x00004000 [0001.636] I> 16) Base:0x4004a000 Size:0x00002000 [0001.640] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.645] I> 18) Base:0x4004c000 Size:0x00002000 [0001.649] I> 19) Base:0xf2200000 Size:0x00600000 [0001.654] I> 20) Base:0x4004e000 Size:0x00002000 [0001.658] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.662] I> 22) Base:0x00000000 Size:0x00000000 [0001.667] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.671] I> 24) Base:0xf6000000 Size:0x02000000 [0001.676] I> 25) Base:0x40050000 Size:0x00002000 [0001.680] I> 26) Base:0x40040000 Size:0x00006000 [0001.685] I> 27) Base:0xf1800000 Size:0x00400000 [0001.689] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.694] I> 29) Base:0xf1400000 Size:0x00400000 [0001.698] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.703] I> 31) Base:0x00000000 Size:0x00000000 [0001.707] I> 32) Base:0xf8000000 Size:0x08000000 [0001.712] I> 33) Base:0x00000000 Size:0x00000000 [0001.716] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.720] I> 35) Base:0xab000000 Size:0x01000000 [0001.725] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.729] I> 37) Base:0xf2800000 Size:0x00800000 [0001.734] I> 38) Base:0x80000000 Size:0x20000000 [0001.738] I> 39) Base:0xb0000000 Size:0x08000000 [0001.743] I> 40) Base:0x00000000 Size:0x00000000 [0001.747] I> 41) Base:0x00000000 Size:0x00000000 [0001.752] I> 42) Base:0x00000000 Size:0x00000000 [0001.756] I> 43) Base:0x00000000 Size:0x00000000 [0001.761] I> 44) Base:0x00000000 Size:0x00000000 [0001.765] I> 45) Base:0x00000000 Size:0x00000000 [0001.770] GIC-SPI Target CPU: 0 [0001.773] Interrupts Init done [0001.775] calling constructors [0001.778] initializing heap [0001.781] I> Heap: [0xa06905a8 ... 0xab000000] [0001.785] initializing threads [0001.788] initializing timers [0001.791] creating bootstrap completion thread [0001.795] top of bootstrap2() [0001.798] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.803] initializing platform [0001.806] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.811] W> device prod register failed [0001.815] I> Bl_dtb @0xaaf00000 [0001.820] W> "plugin-manager" doesn't exist, creating [0001.823] W> "ids" doesn't exist, creating [0001.827] W> "connection" doesn't exist, creating [0001.831] W> "configs" doesn't exist, creating [0001.842] I> Find /i2c@3160000's alias i2c0 [0001.843] I> Reading eeprom i2c=0 address=0x50 [0001.869] I> Device at /i2c@3160000:0x50 [0001.870] I> Reading eeprom i2c=0 address=0x57 [0001.870] E> I2C: slave not found in slaves. [0001.870] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start t. [0001.871] E> I2C_DEV: Failed to send register address 0x00000000. [0001.872] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae a. [0001.879] E> eeprom: Failed to read I2C slave device [0001.884] I> Eeprom read failed 0x3526070d [0001.890] I> Find /i2c@c240000's alias i2c1 [0001.892] I> Reading eeprom i2c=1 address=0x50 [0001.898] E> I2C: slave not found in slaves. [0001.900] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start t. [0001.908] E> I2C_DEV: Failed to send register address 0x00000000. [0001.914] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 a. [0001.923] E> eeprom: Retry to read I2C slave device. [0001.928] E> I2C: slave not found in slaves. [0001.932] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start t. [0001.940] E> I2C_DEV: Failed to send register address 0x00000000. [0001.946] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 a. [0001.955] E> eeprom: Failed to read I2C slave device [0001.960] I> Eeprom read failed 0x3526070d [0001.964] I> create_pm_ids: id: 3668-0001-200-G, len: 15 [0001.969] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03 [0001.980] I> Adding plugin-manager/ids/3668-0001-200=/i2c@3160000:module@0x50 [0001.988] W> "i2c@3160000" doesn't exist, creating [0001.992] W> "module@0x50" doesn't exist, creating [0001.999] I> Adding plugin-manager/cvm [0002.000] W> "chip-id" doesn't exist, creating [0002.004] I> Adding plugin-manager/chip-id/A02P [0002.009] I> Plugin-manager override starting [0002.014] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.024] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.029] I> node /plugin-manager/fragement-tegra-sdhci-sd-dis matches [0002.037] I> Disable plugin-manager status in FDT [0002.037] I> Plugin-manager override finished successfully [0002.041] I> gpio framework initialized [0002.046] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' drir [0002.053] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon'r [0002.059] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.066] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0002.074] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0002.081] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.087] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.094] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0002.102] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0002.109] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.116] I> fixed regulator driver initialized [0002.124] I> register 'maxim' power off handle [0002.125] I> virtual i2c enabled [0002.127] I> registered 'maxim,max20024' pmic [0002.131] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.138] I> Boot-device: QSPI [0002.140] I> Boot_device: QSPI_FLASH instance: 0 [0002.146] I> QSPI source rate = 204000 Khz [0002.149] I> Requested rate for QSPI clock = 34000 Khz [0002.154] I> BPMP-set rate for QSPI clk = 34000 Khz [0002.159] I> QSPI Flash Size = 32 MB [0002.167] I> Qspi initialized successfully [0002.167] I> qspi flash-0 params source = boot args [0002.171] I> create_pm_ids: id: 3668-0001-200-G, len: 15 [0002.176] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03 [0002.191] I> sdmmc-3 params source = safe params [0002.192] I> Found 47 partitions in QSPI_FLASH (instance 0) [0002.213] W> Cannot find any partition table for 00000003 [0002.225] I> Found 11 partitions in SDMMC_USER (instance 3) [0002.233] I> regulator 'vdd-hdmi-5v0' already enabled [0002.237] I> regulator 'vdd-hdmi-5v0' already enabled [0002.238] I> hdmi cable connected [0002.239] W> set volts not configured for 'vdd-1v0' [0002.240] W> set volts not configured for 'vdd-1v8-hs' [0002.243] E> invalid display type [0002.244] E> cannot find any other nvdisp nodes [0002.247] E> I2C: slave not found in slaves. [0002.247] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start t. [0002.251] E> I2C_DEV: Failed to send register address 0x00000000. [0002.256] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 a. [0002.266] E> could not read edid [0002.272] I> hdmi_enable, starting HDMI initialisation [0002.278] I> hdmi_enable, HDMI initialisation complete [0002.288] I> Load in CBoot Boot Options partition and parse it [0002.289] E> Error -9 when finding node with path /boot-configuration [0002.291] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO fil. [0002.298] I> Hit any key to stop autoboot: 4 3 2 1 [0004.306] initializing target [0004.306] calling apps_init() [0004.307] starting app kernel_boot_app [0004.313] I> found decompressor handler: lz4-legacy [0004.313] I> decompressing BMP blob ... [0004.317] I> Kernel type = Normal [0004.317] I> Loading kernel-bootctrl from partition [0004.317] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.326] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.326] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.327] I> ########## SD boot ########## [0004.332] W> Error: failed to get sd-card params [0004.336] I> -0 params source = [0004.339] E> Failed to initialize device 6-0 [0004.343] E> SD boot failed, err: 252641293 [0004.347] I> ########## USB boot ########## [0004.356] W> No valid slot number is found in scratch register [0004.357] W> Return default slot: _a [0004.368] I> USB Firmware Version: 60.06 release [0004.422] I> regulator of usb2-0 already enabled [0004.427] I> regulator of usb2-1 already enabled [0004.431] I> regulator of usb2-2 already enabled [0005.497] I> USB 2.0 port 3 new full-speed USB device detected [0005.498] W> Change usb2 root port id to 2 [0005.498] W> Change usb2 root port id to 3 [0005.499] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f8000 [0005.500] E> slot id is 1 [0005.501] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f8000 [0005.511] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f8000 [0005.518] I> [0005.518] I> Enumerated USB Device 10c4:ea60 [0005.522] I> [0005.524] E> Enumerated device doesn't belong to MSD class or protocol is not ! [0005.532] E> USBMSD: Failed to initialize Enumerated USB device either not an . [0005.546] E> Error opening USBMSD driver 0, err: 7c7c0312 [0005.551] E> Failed to initialize device 5-0 [0005.555] E> USB boot failed, err: 2088502034 [0005.560] I> ########## Fixed storage boot ########## [0005.564] I> Already published: 00010003 [0005.568] I> Look for boot partition [0005.572] I> Fallback: assuming 0th partition is boot partition [0005.577] I> Detect filesystem [0005.604] I> Loading extlinux.conf ... [0005.605] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.648] I> L4T boot options [0005.648] I> [1]: "primary kernel" [0005.648] I> Enter choice: [0008.649] I> Continuing with default option: 1 [0008.649] I> Loading kernel sig file from rootfs ... [0008.649] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.668] I> Loading kernel binary from rootfs ... [0008.668] I> rootfs path: /sdmmc_user/boot/Image [0009.084] I> Validate kernel ... [0009.084] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.397] E> digest on binary did not match!! [0009.397] C> OEM authentication of kernel payload failed! [0009.398] W> Failed to validate kernel binary (err=1077936152, fail=0) [0009.398] W> Security fuse not burned, ignore validation failure [0009.409] I> Loading kernel-dtb sig file from rootfs ... [0009.410] I> rootfs path: /sdmmc_user/boot/dtb/tegra194-p3668-all-p3509-0000.dg [0009.434] I> Loading kernel-dtb binary from rootfs ... [0009.435] I> rootfs path: /sdmmc_user/boot/dtb/tegra194-p3668-all-p3509-0000.db [0009.460] I> Validate kernel-dtb ... [0009.460] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.463] E> digest on binary did not match!! [0009.463] C> OEM authentication of kernel-dtb payload failed! [0009.464] W> Failed to validate kernel-dtb binary (err=1077936152, fail=0) [0009.464] W> Security fuse not burned, ignore validation failure [0009.468] I> Loading ramdisk from rootfs ... [0009.472] I> rootfs path: /sdmmc_user/boot/initrd [0009.554] I> Kernel hdr @0xa4ac0000 [0009.554] I> Kernel dtb @0x90000000 [0009.554] I> decompressor handler not found [0009.555] I> Copying kernel image (34197512 bytes) from 0xa4ac0000 to 0x800800e [0009.566] I> Updated bpmp info to DTB [0009.567] I> Ramdisk: Base: 0x91000000; Size: 0x54ecaf [0009.567] I> Updated initrd info to DTB [0009.567] W> WARN: Fail to override "console=none" in commandline [0009.568] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display paras [0009.574] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display paras [0009.581] W> No valid slot number is found in scratch register [0009.587] W> Return default slot: _a [0009.590] I> Active slot suffix: [0009.594] I> add_boot_slot_suffix: slot_suffix = [0009.598] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_su [0009.628] I> Updated bootarg info to DTB [0009.632] W> MAC addr invalid! [0009.634] E> Failed to get WIFI MAC address [0009.638] W> MAC addr invalid! [0009.641] E> Failed to get Bluetooth MAC address [0009.646] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:07:66:f2 [0009.652] W> "plugin-manager" doesn't exist, creating [0009.657] I> Adding /chosen/plugin-manager/cvm [0009.661] W> "chip-id" doesn't exist, creating [0009.665] I> Adding /chosen/plugin-manager/chip-id [0009.670] W> "configs" doesn't exist, creating [0009.674] I> Adding /chosen/plugin-manager/configs [0009.679] W> "ids" doesn't exist, creating [0009.683] I> Adding /chosen/plugin-manager/ids [0009.687] W> "odm-data" doesn't exist, creating [0009.692] I> Adding /chosen/plugin-manager/odm-data [0009.699] W> "memory" doesn't exist, creating [0009.701] I> [0] START: 0x80000000, END: 0xac000000 [0009.705] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.710] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.715] I> dram_block larger than 80000000 [0009.719] I> [3] START: 0x100000000, END: 0x280000000 [0009.724] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.729] I> added [base:0xac200000, size:0x44600000] to /memory [0009.735] I> added [base:0x100000000, size:0x180000000] to /memory [0009.742] I> Updated memory info to DTB [0009.745] E> add_disp_param: failed to get display params for du=1 [0009.751] W> "reset" doesn't exist, creating [0009.756] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.760] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.765] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.769] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.774] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.779] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.784] I> Deleted cpu@6 node in DT [0009.787] I> Deleted cpu@7 node in DT [0009.791] I> Deleted cluster3 node in FDT [0009.795] I> Update arm-pmu in FDT [0009.798] I> - update property: interrupts [0009.802] I> - update property: interrupt-affinity [0009.807] W> "misc-data" doesn't exist, creating [0009.811] I> Boot-device: QSPI [0009.814] W> Unknown boot device [0009.817] I> Add storage-qspi to plugin-manager/misc-data [0009.822] W> Unknown storage device [0009.825] I> Add serial number:1421420050524 as DT property [0009.831] I> Plugin-manager override starting [0009.835] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.842] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.848] I> node /plugin-manager/fragement-tegra-sdhci-sd-dis matches [0009.855] I> Disable plugin-manager status in FDT [0009.857] I> Plugin-manager override finished successfully [0009.863] I> tegrabl_load_kernel_and_dtb: Done [0009.887] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140 (duong@gremsy) (gcc version 7.3.1 201804251 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options) [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0696000 ��WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 ��[ 1.740527] tegradc 15200000.nvdisplay: hdmi: edid read failed ��WARNING: pll_d2 has no dyn ramp WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 ��[ 1.740864] tegradc 15200000.nvdisplay: blank - powerdown [ 1.779730] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 7 66 f2 [ 1.779778] extcon-disp-state external-connection:disp-state: cable 47 state0 [ 1.779782] Extcon AUX1(HDMI) disable [ 1.779841] libphy: dwc_phy: probed [ 1.782167] PPP generic driver version 2.4.2 [ 1.782662] PPP BSD Compression module registered [ 1.782666] PPP Deflate Compression module registered [ 1.782682] PPP MPPE Compression module registered [ 1.782686] NET: Registered protocol family 24 [ 1.782758] usbcore: registered new interface driver r8152 [ 1.782794] usbcore: registered new interface driver asix [ 1.782827] usbcore: registered new interface driver ax88179_178a [ 1.782855] usbcore: registered new interface driver cdc_ether [ 1.782888] usbcore: registered new interface driver net1080 [ 1.782916] usbcore: registered new interface driver cdc_subset [ 1.782945] usbcore: registered new interface driver zaurus [ 1.782988] usbcore: registered new interface driver cdc_ncm [ 1.783485] VFIO - User Level meta-driver version: 0.3 [ 1.784766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.784790] ehci-pci: EHCI PCI platform driver [ 1.784824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.784833] ohci-pci: OHCI PCI platform driver [ 1.784868] ohci-platform: OHCI generic platform driver [ 1.789962] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.791846] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f5271000 id [ 1.792452] usbcore: registered new interface driver uas [ 1.792517] usbcore: registered new interface driver usb-storage [ 1.792739] usbcore: registered new interface driver usbserial [ 1.794197] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34e [ 1.794223] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.794240] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus nu1 [ 1.794940] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x1100 [ 1.794979] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.795165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.795170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 1.795175] usb usb1: Product: xHCI Host Controller [ 1.795187] usb usb1: Manufacturer: Linux 4.9.140 xhci-hcd [ 1.795190] usb usb1: SerialNumber: 3610000.xhci [ 1.795724] hub 1-0:1.0: USB hub found [ 1.795856] hub 1-0:1.0: 4 ports detected [ 1.796672] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.796681] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus nu2 [ 1.796689] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSped [ 1.796937] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.796943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 1.796947] usb usb2: Product: xHCI Host Controller [ 1.796951] usb usb2: Manufacturer: Linux 4.9.140 xhci-hcd [ 1.796955] usb usb2: SerialNumber: 3610000.xhci [ 1.797442] hub 2-0:1.0: USB hub found [ 1.797528] hub 2-0:1.0: 4 ports detected [ 1.798083] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.798157] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.799090] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.799110] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.799335] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.799342] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.800036] mousedev: PS/2 mouse device common for all mice [ 1.800145] usbcore: registered new interface driver xpad [ 1.806287] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.807705] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.826405] tegradc 15200000.nvdisplay: unblank [ 1.827843] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.828112] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.836423] Parent Clock set for DC plld2 [ 1.841204] tegradc 15200000.nvdisplay: hdmi: tmds rate:74250K prod-setting:m [ 1.842559] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.842569] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.846100] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 1.849910] extcon-disp-state external-connection:disp-state: cable 47 state1 [ 1.849914] Extcon AUX1(HDMI) enable [ 1.934099] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as 0 [ 1.935722] Wake73 for irq=42 [ 1.937019] rtc rtc1: alarm rtc device [ 1.937034] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.937061] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.937257] i2c /dev entries driver [ 1.939842] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.940267] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.940273] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.941792] max77620-power max20024-power: Event recorder REG_NVERC : 0x50 [ 1.949272] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:4 [ 1.953548] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:0 [ 1.953576] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu0 [ 1.953580] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu0 [ 1.953686] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state0 [ 1.953747] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu 0 [ 1.953752] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu 0 [ 1.954009] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:1 [ 1.954095] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu 0 [ 1.954101] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu 0 [ 1.954362] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:0 [ 1.954417] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0 [ 1.954423] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0 [ 1.954823] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_0 [ 1.954896] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu 0 [ 1.954901] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu 0 [ 1.955174] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:1 [ 1.955755] FAN dev name: pwm-fan [ 1.955799] FAN:gpio request success. [ 1.955808] FAN: can't find tach_gpio [ 1.955845] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quit [ 1.955878] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.956122] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.956127] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.956811] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, s2 [ 1.956817] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=22 [ 1.956822] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=12 [ 1.956826] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=12 [ 1.956830] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=13 [ 1.956834] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=13 [ 1.956838] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=13 [ 1.956841] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=14 [ 1.956846] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=4 [ 1.956851] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=4 [ 1.957979] device-mapper: uevent: version 1.0.3 [ 1.958516] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-m [ 1.962075] tegra194_cpufreq_probe: platform driver Initialization: pass [ 1.963107] cpuidle: Initializing cpuidle driver [ 1.964063] sdhci: Secure Digital Host Controller Interface driver [ 1.964065] sdhci: Copyright(c) Pierre Ossman [ 1.964067] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.965079] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.966886] CMDQ: cmdq_platfm_init successful [ 1.967489] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 1.970069] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.972159] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 320 [ 1.977020] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.978613] tegra-se-nvhost 15810000.se: initialized [ 1.979823] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.980673] tegra-se-nvhost 15820000.se: initialized [ 1.981893] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.982588] tegra-se-nvhost 15830000.se: initialized [ 1.983320] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.984306] tegra-se-nvhost 15840000.se: initialized [ 1.985404] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.985898] hidraw: raw HID events driver (C) Jiri Kosina [ 1.987333] usbcore: registered new interface driver usbhid [ 1.987335] usbhid: USB HID core driver [ 1.991317] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is notd [ 1.992482] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.993014] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.993680] denver_knobs_init:MTS_VERSION:50168445 [ 1.993894] tegra19x_actmon d230000.actmon: in actmon_register()... [ 1.994559] tegra19x_actmon d230000.actmon: initialization Completed for thel [ 1.995054] t19x_cache tegra-cache: probed [ 1.997069] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4 [ 1.997075] misc nvmap: created heap cvsram base 0x0000000050000000 size (40) [ 1.997566] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 1.997952] PLL_AON clock registered [ 1.999068] Clocks initialized successfully [ 2.000668] nvpmodel: initialized successfully [ 2.001777] trusty-virtio trusty:virtio: initializing [ 2.001992] trusty_ipc virtio0: vring0: va(pa) ffffffc1e2b20000(0) qsz 32 n1 [ 2.002001] trusty_ipc virtio0: vring1: va(pa) ffffffc1e2b22000(0) qsz 32 n2 [ 2.002154] trusty-virtio trusty:virtio: initializing done [ 2.002575] trusty_ipc virtio0: is online [ 2.002847] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.003240] usbcore: registered new interface driver snd-usb-audio [ 2.012256] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADr [ 2.016415] gpio tegra-gpio wake40 for gpio=129(Q:1) [ 2.016472] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADr [ 2.024638] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound0 [ 2.024892] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound1 [ 2.025105] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound2 [ 2.025345] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound3 [ 2.058282] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_suppor1 [ 2.071805] mmc0: periodic cache flush enabled [ 2.071819] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.072430] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.072691] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.072937] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.077219] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.079771] OPE platform probe [ 2.079903] OPE platform probe successful [ 2.083297] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.124233] usb 1-2: new full-speed USB device number 2 using tegra-xusb [ 2.146098] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60 [ 2.146102] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.146106] usb 1-2: Product: CP2102 USB to UART Bridge Controller [ 2.146108] usb 1-2: Manufacturer: Silicon Labs [ 2.146111] usb 1-2: SerialNumber: 0001 [ 2.152124] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.152296] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.152440] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.152557] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.152676] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.152790] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.152908] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.153028] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.153161] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.153305] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.153445] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.153581] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.153708] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.153824] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.153937] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.154051] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.154169] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.154285] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.154399] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.154523] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.183766] u32 classifier [ 2.183769] Actions configured [ 2.183856] Initializing XFRM netlink socket [ 2.184520] NET: Registered protocol family 10 [ 2.185332] NET: Registered protocol family 17 [ 2.185345] NET: Registered protocol family 15 [ 2.185402] bridge: filtering via arp/ip/ip6tables is no longer available by. [ 2.185485] Bluetooth: RFCOMM socket layer initialized [ 2.185502] Bluetooth: RFCOMM ver 1.11 [ 2.185508] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.185514] Bluetooth: HIDP socket layer initialized [ 2.185530] 9pnet: Installing 9P2000 support [ 2.185595] Key type dns_resolver registered [ 2.185880] Registered cp15_barrier emulation handler [ 2.185901] Registered setend emulation handler [ 2.187829] registered taskstats version 1 [ 2.188318] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.189376] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.189394] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.189401] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.189405] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.214362] mmc1: host does not support reading read-only switch, assuming we [ 2.264228] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.286076] usb 1-3: New USB device found, idVendor=10c4, idProduct=ea60 [ 2.286081] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.286084] usb 1-3: Product: CP2102 USB to UART Bridge Controller [ 2.286087] usb 1-3: Manufacturer: Silicon Labs [ 2.286090] usb 1-3: SerialNumber: 0001 [ 2.488254] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.704094] tegra-pcie-dw 14160000.pcie: link is down [ 2.704335] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.704343] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.704350] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus add) [ 2.704354] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17fffffff) [ 2.704358] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173ffffff] [ 2.704386] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.704549] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.704803] iommu: Adding device 0004:00:00.0 to group 59 [ 2.705150] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.705173] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), 2 [ 2.705409] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.705415] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.705501] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.705676] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.705730] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.705816] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.705924] iommu: Removing device 0004:00:00.0 from group 59 [ 2.706016] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.707617] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.708856] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.709968] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.709985] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.709991] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.709995] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.032223] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuk [ 3.032227] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 3.032234] sdhci: Sys addr: 0x00000000 | Version: 0x00000505 [ 3.032238] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000000 [ 3.032243] sdhci: Argument: 0x00000000 | Trn mode: 0x00000010 [ 3.032248] sdhci: Present: 0x01fb0206 | Host ctl: 0x00000016 [ 3.032252] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 3.032256] sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 3.032260] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 3.032265] sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020 [ 3.032269] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 3.032274] sdhci: Caps: 0x3f6cd08c | Caps_1: 0x18002f73 [ 3.032278] sdhci: Cmd: 0x0000133a | Max curr: 0x00000000 [ 3.032280] sdhci: Host ctl2: 0x0000304a [ 3.032287] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 3.032305] sdhci: =========================================== [ 3.114589] CPU1: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=800000010 [ 3.114599] CPU4: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=800002000 [ 3.114604] CPU5: SError detected, daif=1c0, spsr=0x808000c5, mpidr=800002010 [ 3.114610] CPU2: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=800001000 [ 3.196831] CPU3: SError detected, daif=1c0, spsr=0x8000c5, mpidr=80000101, 0 [ 3.196842] CPU:0, Error:BPMP-NOC@0xd600000,irq=481 [ 3.196844] ************************************** [ 3.196845] ************************************** [ 3.196847] * For more Internal Decode Help [ 3.196851] * For more Internal Decode Help [ 3.196852] * http://nv/cbberr [ 3.196853] * http://nv/cbberr [ 3.196854] * NVIDIA userID is required to access [ 3.196855] * NVIDIA userID is required to access [ 3.196857] ************************************** [ 3.196858] ************************************** [ 3.196860] CPU:0, Error:BPMP-NOC [ 3.196861] CPU:1, Error:BPMP-NOC [ 3.196863] Error Logger : 1 [ 3.196865] Error Logger : 1 [ 3.196873] ErrLog0 : 0x80030600 [ 3.196874] ErrLog0 : 0x80030600 [ 3.196876] Transaction Type : RD - Read, Incrementing [ 3.196878] Transaction Type : RD - Read, Incrementing [ 3.196880] Error Code : TMO [ 3.196881] Error Code : TMO [ 3.196883] Error Source : Target NIU [ 3.196884] Error Source : Target NIU [ 3.196886] Error Description : Target time-out error [ 3.196887] Error Description : Target time-out error [ 3.196889] Packet header Lock : 0 [ 3.196890] Packet header Lock : 0 [ 3.196892] Packet header Len1 : 3 [ 3.196893] Packet header Len1 : 3 [ 3.196894] NOC protocol version : version >= 2.7 [ 3.196896] NOC protocol version : version >= 2.7 [ 3.196898] ErrLog1 : 0xba200 [ 3.196899] ErrLog1 : 0xba200 [ 3.196901] ErrLog2 : 0x0 [ 3.196902] ErrLog2 : 0x0 [ 3.196904] RouteId : 0xba200 [ 3.196905] RouteId : 0xba200 [ 3.196907] InitFlow : cpu_p_i/I/0 [ 3.196908] InitFlow : cpu_p_i/I/0 [ 3.196909] Targflow : cbb_t/T/0 [ 3.196911] Targflow : cbb_t/T/0 [ 3.196912] TargSubRange : 1 [ 3.196913] TargSubRange : 1 [ 3.196914] SeqId : 0 [ 3.196915] SeqId : 0 [ 3.196916] ErrLog3 : 0xc8014 [ 3.196917] ErrLog3 : 0xc8014 [ 3.196918] ErrLog4 : 0x0 [ 3.196920] ErrLog4 : 0x0 [ 3.196935] Address : 0x208c8014 (unknown device) [ 3.196937] Address : 0x208c8014 (unknown device) [ 3.196939] ErrLog5 : 0xcfa30 [ 3.196941] ErrLog5 : 0xcfa30 [ 3.196942] Master ID : BPMP [ 3.196944] Master ID : BPMP [ 3.196945] Security Group(GRPSEC): 0x7d [ 3.196947] Security Group(GRPSEC): 0x7d [ 3.196949] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 3.196951] Cache : 0x0 -- Non-cacheable/Non-Bufferable) [ 3.196953] Protection : 0x3 -- Privileged, Non-Secure, Data As [ 3.196955] Protection : 0x3 -- Privileged, Non-Secure, Data As [ 3.196957] FALCONSEC : 0x0 [ 3.196958] FALCONSEC : 0x0 [ 3.196960] Virtual Queuing Channel(VQC): 0x0 [ 3.196961] Virtual Queuing Channel(VQC): 0x0 [ 3.196963] ************************************** [ 3.196965] ************************************** [ 3.196974] ************************************** [ 3.196975] * For more Internal Decode Help [ 3.196977] * http://nv/cbberr [ 3.196978] * NVIDIA userID is required to access [ 3.196979] ************************************** [ 3.196981] CPU:1, Error:CBB-NOC [ 3.196983] Error Logger : 0 [ 3.196989] ErrLog0 : 0x80000008 [ 3.196991] Transaction Type : WR - Write, Incrementing [ 3.196993] Error Code : SLV [ 3.196995] Error Source : Target [ 3.196997] Error Description : Target error detected by CBB slave [ 3.197010] AXI2APB_4 bridge error: RDFIFOF - Read Response FIFO Full intt [ 3.197012] AXI2APB_5 bridge error: SFIFONE - Status FIFO Not Empty intert [ 3.197014] AXI2APB_5 bridge error: TIM - Timer(Timeout) interrupt [ 3.197014] Packet header Lock : 0 [ 3.197016] Packet header Len1 : 0 [ 3.197017] NOC protocol version : version >= 2.7 [ 3.197019] ErrLog1 : 0x319c03 [ 3.197021] ErrLog2 : 0x0 [ 3.197023] RouteId : 0x319c03 [ 3.197025] CPU:0, Error:CBB-NOC@0x2300000,irq=478 [ 3.197027] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 3.197028] ************************************** [ 3.197030] Targflow : axis_satellite_axi2apb_p2pm/T/axis_sam [ 3.197031] * For more Internal Decode Help [ 3.197032] TargSubRange : 78 [ 3.197033] * http://nv/cbberr [ 3.197034] SeqId : 0 [ 3.197035] * NVIDIA userID is required to access [ 3.197036] ErrLog3 : 0x2f [ 3.197038] ************************************** [ 3.197039] ErrLog4 : 0x0 [ 3.197040] CPU:0, Error:CBB-NOC [ 3.197043] Error Logger : 0 [ 3.197045] Address : 0x344002f -- /sdhci@3440000 + 0x2f [ 3.197047] ErrLog5 : 0x89f851 [ 3.197049] Non-Modify : 0x1 [ 3.197051] ErrLog0 : 0x80000008 [ 3.197052] AXI ID : 0x1 [ 3.197053] Transaction Type : WR - Write, Incrementing [ 3.197054] Master ID : CCPLEX [ 3.197055] Error Code : SLV [ 3.197056] Security Group(GRPSEC): 0x7e [ 3.197058] Error Source : Target [ 3.197059] Cache : 0x1 -- Device [ 3.197061] Error Description : Target error detected by CBB slave [ 3.197063] Protection : 0x2 -- Unprivileged, Non-Secure, Datas [ 3.197065] FALCONSEC : 0x0 [ 3.197067] Virtual Queuing Channel(VQC): 0x0 [ 3.197071] ************************************** [ 3.197074] AXI2APB_5 bridge error: SFIFONE - Status FIFO Not Empty intert [ 3.197074] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.197075] Packet header Lock : 0 [ 3.197077] Packet header Len1 : 0 [ 3.197079] NOC protocol version : version >= 2.7 [ 3.197081] ErrLog1 : 0x319c03 [ 3.197083] ErrLog2 : 0x0 [ 3.197085] RouteId : 0x319c03 [ 3.197086] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 3.197088] Targflow : axis_satellite_axi2apb_p2pm/T/axis_sam [ 3.197090] TargSubRange : 78 [ 3.197092] SeqId : 0 [ 3.197093] ErrLog3 : 0x2f [ 3.197095] ErrLog4 : 0x0 [ 3.197097] ************************************** [ 3.197100] Address : 0x344002f -- /sdhci@3440000 + 0x2f [ 3.197101] RAS Error in SCF:IOB, ERRSELR_EL1=1025: [ 3.197103] ErrLog5 : 0x89f851 [ 3.197105] Status = 0xfc009604 [ 3.197107] Non-Modify : 0x1 [ 3.197108] IERR = CBB Interface Error: 0x96 [ 3.197109] AXI ID : 0x1 [ 3.197110] SERR = Assertion Failure: 0x4 [ 3.197112] Master ID : CCPLEX [ 3.197113] Overflow (there may be more errors) - Uncorrectable [ 3.197114] Security Group(GRPSEC): 0x7e [ 3.197115] Uncorrectable (this is fatal) [ 3.197117] Cache : 0x1 -- Device [ 3.197119] Protection : 0x2 -- Unprivileged, Non-Secure, Datas [ 3.197121] FALCONSEC : 0x0 [ 3.197122] MISC0 = 0x40 [ 3.197124] Virtual Queuing Channel(VQC): 0x0 [ 3.197125] MISC1 = 0x2a42404063 [ 3.197127] ************************************** [ 3.197130] ADDR = 0x8000000003440000 [ 3.197133] CPU0: SError detected, daif=140, spsr=0x40400145, mpidr=800000000 [ 3.197136] ************************************** [ 3.197140] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.197162] ************************************** [ 3.197164] RAS Error in L2, ERRSELR_EL1=528: [ 3.197165] Status = 0xfc006512 [ 3.197167] IERR = SCF to L2 Slave Error Write: 0x65 [ 3.197169] SERR = Error response from slave: 0x12 [ 3.197171] Overflow (there may be more errors) - Uncorrectable [ 3.197172] Uncorrectable (this is fatal) [ 3.197178] MISC0 = 0x100000000200000 [ 3.197180] MISC1 = 0x40ac0000000 [ 3.197184] ADDR = 0x8000000003440000 [ 3.197189] ************************************** [ 3.197209] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.197288] Bad mode in Error handler detected on CPU1, code 0xbe000000 -- Sr [ 3.197293] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP [ 3.197298] Modules linked in: [ 3.197312] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.140 #77 [ 3.197313] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [ 3.197316] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.197319] task: ffffffc1f6b72a00 task.stack: ffffffc1f6b84000 [ 3.197328] PC is at t19x_cpu_enter_state+0x4c/0x118 [ 3.197332] LR is at t19x_cpu_enter_state+0x1c/0x118 [ 3.197339] pc : [] lr : [] pstate: 80c05 [ 3.197340] sp : ffffffc1f6b87e80 [ 3.197342] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.197353] x29: ffffffc1f6b87e80 x28: 0000000000000001 [ 3.197361] x27: ffffff8009e46000 x26: ffffff8009811ac8 [ 3.197366] x25: 0000000000000000 x24: 00000000b61f5160 [ 3.197370] x23: ffffff8009fb9a68 x22: ffffffc1ffd2cad0 [ 3.197375] x21: ffffff8009fb9a80 x20: ffffff800a18aa50 [ 3.197380] x19: 0000000000000000 x18: 0000000000001d0d [ 3.197384] x17: 000000000000000e x16: 000000000000c46d [ 3.197385] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.197390] x15: ffffff800a1a8230 x14: ffffff8008f799f8 [ 3.197395] x13: 00000000000024db x12: 071c71c71c71c71c [ 3.197400] x11: 000000000000000b x10: 0101010101010101 [ 3.197405] x9 : 0000000000000001 x8 : 7f7f7f7f7f7f7f7f [ 3.197410] x7 : fefefeff646c606d x6 : 00170401e9e1acf4 [ 3.197415] x5 : 742c616901041700 x4 : 8080808000000000 [ 3.197419] x3 : b34b234b0963a000 x2 : 000000000000000b [ 3.197424] x1 : 0000000000000000 x0 : 0000000000000000 [ 3.197425] [ 3.197428] Process swapper/1 (pid: 0, stack limit = 0xffffffc1f6b84000) [ 3.197430] Call trace: [ 3.197435] [] t19x_cpu_enter_state+0x4c/0x118 [ 3.197440] [] cpuidle_enter_state+0x84/0x380 [ 3.197443] [] cpuidle_enter+0x34/0x48 [ 3.197448] [] call_cpuidle+0x44/0x70 [ 3.197451] [] cpu_startup_entry+0x1b0/0x200 [ 3.197458] [] secondary_start_kernel+0x190/0x1f8 [ 3.197461] [<0000000080f611a4>] 0x80f611a4 [ 3.197473] CPU4: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=800002000 [ 3.197475] ---[ end trace c26e49aaee2f687c ]--- [ 3.199919] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.199941] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.199981] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.200064] CPU5: SError detected, daif=1c0, spsr=0x808000c5, mpidr=800002010 [ 3.200087] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.200112] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.200153] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.200244] CPU2: SError detected, daif=1c0, spsr=0x80c000c5, mpidr=800001000 [ 3.200262] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.200283] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.200323] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.200421] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.200444] mmc1: new ultra high speed SDR50 SDHC card at address e624 [ 3.200446] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.200486] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.200585] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.200607] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.200647] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.200748] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.200769] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.200809] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.200910] ras_ccplex_serr_callback: Scanning CCPLEX Error Records for Uncos [ 3.200931] ras_corecluster_serr_callback:Scanning CoreCluster Error Recordss [ 3.200971] ras_core_serr_callback: Scanning Core Error Records for Uncorrecs [ 3.205939] Kernel panic - not syncing: Attempted to kill the idle task! [ 3.205945] SMP: stopping secondary CPUs [ 3.205959] Kernel Offset: disabled [ 3.205961] Memory Limit: none [ 5.987872] trusty-log panic notifier - trusty version Built: 21:16:17 Jun 2 [ 5.987873] Rebooting in 5 seconds..