[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (arm1@arm1-pc) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #62 SMP PREEMPT Thu Sep 30 09:23:13 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1004541 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29784(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147752K/4018164K available (15422K kernel code, 2968K rwdata, 6708K rodata, 8640K init, 612K bss, 116748K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB) [ 0.000000] .rodata : 0xffffff8008f90000 - 0xffffff8009630000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a186008 ( 2969 KB) [ 0.000000] .bss : 0xffffff800a186008 - 0xffffff800a21f0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000971] Console: colour dummy device 80x25 [ 0.000975] console [tty0] enabled [ 0.000978] bootconsole [uart8250] disabled [ 0.000987] kmemleak: Kernel memory leak detector disabled [ 0.000997] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001004] pid_max: default: 32768 minimum: 301 [ 0.001308] Security Framework initialized [ 0.001462] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001467] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002039] ftrace: allocating 47262 entries in 185 pages [ 0.125975] sched-energy: Sched-energy-costs installed from DT [ 0.125986] ASID allocator initialised with 65536 entries [ 0.161023] tegra-id: chipid=21817. [ 0.161029] tegra-id: opt_subrevision=1. [ 0.161047] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.161054] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.161059] DTB Build time: [ 0.210648] CPU1: Booted secondary processor [4e0f0030] [ 0.242018] CPU2: Booted secondary processor [4e0f0030] [ 0.273039] CPU3: Booted secondary processor [411fd073] [ 0.304992] CPU4: Booted secondary processor [411fd073] [ 0.336985] CPU5: Booted secondary processor [411fd073] [ 0.337040] Brought up 6 CPUs [ 0.337044] SMP: Total of 6 processors activated. [ 0.337049] CPU features: detected feature: 32-bit EL0 Support [ 0.339086] CPU: All CPU(s) started at EL2 [ 0.339242] alternatives: patching kernel code [ 0.341593] devtmpfs: initialized [ 0.364482] Initilizing CustomIPI irq domain [ 0.364625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.364634] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.373331] pinctrl core: initialized pinctrl subsystem [ 0.373575] OS set in device tree is not L4T. [ 0.373738] regulator-dummy: no parameters [ 0.373871] Initializing plugin-manager [ 0.373926] Plugin module not found [ 0.373960] Plugin-manager status disabled [ 0.375064] NET: Registered protocol family 16 [ 0.376041] pstore: using zlib compression [ 0.376054] console [pstore-1] enabled [ 0.376057] pstore: Registered ramoops as persistent store backend [ 0.376060] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.389053] cpuidle: using governor menu [ 0.389992] bpmp: waiting for handshake [ 0.389995] bpmp: handshake completed [ 0.390013] bpmp: synchronizing channels [ 0.390021] bpmp: channels synchronized [ 0.390024] bpmp: mail init ok [ 0.391465] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.391470] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.391474] arm-smmu 12000000.iommu: stage 1 translation [ 0.391477] arm-smmu 12000000.iommu: stage 2 translation [ 0.391480] arm-smmu 12000000.iommu: nested translation [ 0.391486] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.391492] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.391495] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.391500] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.391504] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.393310] vdso: 2 pages (1 code @ ffffff8008f97000, 1 data @ ffffff8009ea4000) [ 0.393323] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.396475] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.397484] Registering BPMP clocks... [ 0.397558] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.398035] Serial: AMBA PL011 UART driver [ 0.398938] tegra_powergate_init: DONE [ 0.398945] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.398949] DTB Build time: [ 0.400259] Tegra reboot handler registered. [ 0.401434] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.401499] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.401512] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.401515] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.401517] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.401665] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.401675] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.401941] iommu: Adding device 3460000.sdhci to group 0 [ 0.403254] iommu: Adding device 3160000.i2c to group 1 [ 0.403651] iommu: Adding device c240000.i2c to group 2 [ 0.403939] iommu: Adding device 3180000.i2c to group 3 [ 0.404219] iommu: Adding device 3190000.i2c to group 4 [ 0.404582] iommu: Adding device 31b0000.i2c to group 5 [ 0.404884] iommu: Adding device 31c0000.i2c to group 6 [ 0.405208] iommu: Adding device c250000.i2c to group 7 [ 0.405503] iommu: Adding device 31e0000.i2c to group 8 [ 0.406949] iommu: Adding device 3210000.spi to group 9 [ 0.407237] iommu: Adding device c260000.spi to group 10 [ 0.407876] iommu: Adding device 3100000.serial to group 11 [ 0.408165] iommu: Adding device 3110000.serial to group 12 [ 0.408458] iommu: Adding device c280000.serial to group 13 [ 0.408743] iommu: Adding device 3130000.serial to group 14 [ 0.409880] iommu: Adding device 2490000.ether_qos to group 15 [ 0.409892] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.410704] iommu: Adding device b000000.rtcpu to group 16 [ 0.412380] iommu: Adding device 13e10000.host1x to group 17 [ 0.412679] iommu: Adding device 13e10000.host1x:ctx0 to group 18 [ 0.412953] iommu: Adding device 13e10000.host1x:ctx1 to group 19 [ 0.413245] iommu: Adding device 13e10000.host1x:ctx2 to group 20 [ 0.413532] iommu: Adding device 13e10000.host1x:ctx3 to group 21 [ 0.413805] iommu: Adding device 13e10000.host1x:ctx4 to group 22 [ 0.414079] iommu: Adding device 13e10000.host1x:ctx5 to group 23 [ 0.414368] iommu: Adding device 13e10000.host1x:ctx6 to group 24 [ 0.414644] iommu: Adding device 13e10000.host1x:ctx7 to group 25 [ 0.415049] iommu: Adding device 150c0000.nvcsi to group 26 [ 0.415590] iommu: Adding device 15700000.vi to group 27 [ 0.415905] iommu: Adding device 15600000.isp to group 28 [ 0.416103] iommu: Adding device 15200000.dc_common to group 29 [ 0.416145] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x800000) [ 0.416187] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.416636] iommu: Adding device 15200000.nvdisplay to group 30 [ 0.416949] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.417281] iommu: Adding device 15340000.vic to group 32 [ 0.417477] iommu: Adding device 154c0000.nvenc to group 33 [ 0.417663] iommu: Adding device 15480000.nvdec to group 34 [ 0.417965] iommu: Adding device 15380000.nvjpg to group 35 [ 0.418157] iommu: Adding device 15500000.tsec to group 36 [ 0.418345] iommu: Adding device 15100000.tsecb to group 37 [ 0.419211] iommu: Adding device 15810000.se to group 38 [ 0.419400] iommu: Adding device 15820000.se to group 39 [ 0.419587] iommu: Adding device 15830000.se to group 40 [ 0.419771] iommu: Adding device 15840000.se to group 41 [ 0.420524] iommu: Adding device smmu_test to group 42 [ 0.421119] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000 [ 0.421130] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000 [ 0.421139] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000 [ 0.421149] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000 [ 0.421159] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000 [ 0.421166] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.421177] mc-err: mcerr ops are set to t18x [ 0.421321] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.422060] iommu: Adding device 3530000.xhci to group 43 [ 0.422072] arm-smmu: forcing sodev map for 3530000.xhci [ 0.422472] iommu: Adding device 3550000.xudc to group 44 [ 0.422483] arm-smmu: forcing sodev map for 3550000.xudc [ 0.422996] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.423003] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.423008] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.423591] iommu: Adding device 17000000.gp10b to group 45 [ 0.424520] tegra-reset 5000000.clock: registered 193 resets. [ 0.426395] iommu: Adding device d000000.bpmp to group 46 [ 0.426601] bpmp: ping status is 0 [ 0.426679] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.428283] bpmp d000000.bpmp: probe ok [ 0.430926] iommu: Adding device 2600000.dma to group 47 [ 0.431718] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.431751] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.431795] GPIO line 408 (w-disable1) hogged as output/high [ 0.431831] GPIO line 410 (w-disable2) hogged as output/high [ 0.431992] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.435778] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.437398] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.437414] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.437708] iommu: Adding device sound to group 49 [ 0.438020] iommu: Adding device 3510000.hda to group 50 [ 0.444605] iommu: Adding device c1a0000.aon to group 51 [ 0.445142] vdd-1v8-ap: 1800 mV [ 0.445350] vdd-ac-bat: 5000 mV [ 0.445537] vdd-3v3-disp-cvb: 3300 mV [ 0.445812] vdd-3v3-cvb: 3300 mV [ 0.445999] vdd-1v8-cvb: 1800 mV [ 0.446188] vdd-fan: 5000 mV [ 0.446371] vdd-hdmi-5v0: 5000 mV [ 0.446553] vdd_sys_en: 1200 mV [ 0.464976] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.467876] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.468070] SCSI subsystem initialized [ 0.468175] libata version 3.00 loaded. [ 0.468300] usbcore: registered new interface driver usbfs [ 0.468327] usbcore: registered new interface driver hub [ 0.468360] usbcore: registered new device driver usb [ 0.470747] random: fast init done [ 0.477743] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.481170] vddio-ddr: at 1125 mV [ 0.484998] avdd_dsi_csi: 1200 mV [ 0.489090] vdd-1v8: 1800 mV [ 0.492998] vdd-3v3-sys: 3300 mV [ 0.493910] spmic-ldo0: at 1800 mV [ 0.494547] spmic-ldo1: at 800 mV [ 0.497046] vddio-3v3: 3300 mV [ 0.497701] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.501061] vdd-rtc: at 800 mV [ 0.505047] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.509049] spmic-ldo6: at 800 mV [ 0.513045] vdd-pex-1v00: 1000 mV [ 0.513621] dvdd-pex: 1000 mV [ 0.515567] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.515694] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.515862] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.516041] max77620 4-003c: max77620 probe successful [ 0.516413] media: Linux media interface: v0.10 [ 0.516445] Linux video capture interface: v2.00 [ 0.518700] pps_core: LinuxPPS API ver. 1 registered [ 0.518703] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.518714] PTP clock support registered [ 0.518905] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.519094] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.519111] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.520181] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.520196] trusty trusty: selected api version: 3 (requested 3) [ 0.520952] Advanced Linux Sound Architecture Driver Initialized. [ 0.521282] Bluetooth: Core ver 2.22 [ 0.521303] NET: Registered protocol family 31 [ 0.521305] Bluetooth: HCI device and connection manager initialized [ 0.521312] Bluetooth: HCI socket layer initialized [ 0.521316] Bluetooth: L2CAP socket layer initialized [ 0.521328] Bluetooth: SCO socket layer initialized [ 0.521960] vdd-sys-bl: 3300 mV [ 0.523480] camchar: rtcpu character device driver loaded [ 0.523895] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.523968] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.524911] clocksource: Switched to clocksource arch_sys_counter [ 0.546868] VFS: Disk quotas dquot_6.6.0 [ 0.546941] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.547184] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.547628] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.547731] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.547736] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.547743] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.547748] nvmap_page_pool_init: Total RAM pages: 975354 [ 0.547751] nvmap_page_pool_init: nvmap page pool size: 121919 pages (476 MB) [ 0.547800] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.548253] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.550221] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.555659] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.555846] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.556173] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.556246] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.556376] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.556594] la/ptsa driver initialized. [ 0.556603] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.556605] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.556921] NET: Registered protocol family 2 [ 0.557504] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.557659] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.557955] TCP: Hash tables configured (established 32768 bind 32768) [ 0.558004] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.558063] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.558330] NET: Registered protocol family 1 [ 0.558667] RPC: Registered named UNIX socket transport module. [ 0.558670] RPC: Registered udp transport module. [ 0.558672] RPC: Registered tcp transport module. [ 0.558675] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.558681] PCI: CLS 0 bytes, default 64 [ 0.558788] Trying to unpack rootfs image as initramfs... [ 0.768024] Freeing initrd memory: 7068K [ 0.782792] host1x 13e10000.host1x: initialized [ 0.784148] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.786334] audit: initializing netlink subsys (disabled) [ 0.786360] audit: type=2000 audit(0.676:1): initialized [ 0.786755] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.793234] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.794189] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.794695] 9p: Installing v9fs 9p2000 file system support [ 0.796856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.796918] io scheduler noop registered [ 0.797124] io scheduler cfq registered (default) [ 0.799933] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.819659] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 0.840160] iommu: Adding device 2993000.adsp to group 53 [ 0.840713] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.845421] ####################75111############### [ 0.848136] gpiochip_setup_dev: registered GPIOs 228 to 247 on device: gpiochip3 (f75111_0x4e) [ 0.848142] Fintek,f75111 1-004e: 202108141636##########################ret:0,addr:4e [ 0.850212] ####################default_0x4e############### [ 0.850251] ####################75111############### [ 0.852786] gpiochip_setup_dev: registered GPIOs 208 to 227 on device: gpiochip4 (f75111_0x37) [ 0.852790] Fintek,f75111 1-0037: 202108141636##########################ret:0,addr:37 [ 0.854872] ####################default_0x37############### [ 0.855011] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.855891] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.856690] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.857512] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.859469] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.860170] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.860447] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.860671] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.860771] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.862598] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.862949] tsec 15500000.tsec: initialized [ 0.863810] tsec 15100000.tsecb: initialized [ 0.866159] nvdec 15480000.nvdec: initialized [ 0.869877] falcon 15340000.vic: initialized [ 0.870955] falcon 154c0000.nvenc: initialized [ 0.871968] falcon 15380000.nvjpg: initialized [ 0.873970] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.875476] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.876990] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.878478] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.879996] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.881498] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.883009] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.884499] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.887182] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.887190] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.887216] tegradccommon 15200000.dc_common: dma mapping done [ 0.887911] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.887951] generic_infoframe_type: 0x87 [ 0.888015] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.888038] tegradc 15200000.nvdisplay: Display dc.ffffff800abe0000 registered with id=0 [ 0.893610] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.893614] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.893617] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.893766] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.893772] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.894739] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.896722] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.896726] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.899016] tegradc 15200000.nvdisplay: probed [ 0.900525] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.901225] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.901245] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.901635] kfuse 3830000.kfuse: initialized [ 0.902823] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.905970] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.908069] console [ttyS0] disabled [ 0.908106] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 0.908145] console [ttyS0] enabled [ 0.909318] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 0.910044] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 0.910248] serial-tegra 3130000.serial: RX in PIO mode [ 0.910455] Console: switching to colour frame buffer device 240x67 [ 0.910540] tegradc 15200000.nvdisplay: fb registered [ 0.910681] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.910869] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 0.911094] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.911140] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.912135] Parent Clock set for DC plld2 [ 0.912466] [drm] Initialized [ 0.919281] brd: module loaded [ 0.922678] loop: module loaded [ 0.922775] new_mcu 0-0038: nvidia new_mcu i2c_probe [ 0.922780] new_mcu 0-0038: new_mcu 1==============795 [ 0.935958] new_mcu 0-0038: new_mcu 1==============802 [ 0.977416] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 0.977852] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 0.977861] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 0.993079] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.993185] tegra_profiler: auth: init [ 0.993849] THERMAL EST: found 3 subdevs [ 0.993854] THERMAL EST num_resources: 0 [ 0.993858] [THERMAL EST subdev 0] [ 0.993862] [THERMAL EST subdev 1] [ 0.993866] [THERMAL EST subdev 2] [ 0.993874] THERMAL EST: Found 2 profiles, default profile is quiet [ 0.994198] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.994201] THERMAL EST: thz register success. [ 0.994291] THERMAL EST: end of probe, return err: 0 [ 0.995159] sd: No Scsi addr parsed to reserve index [ 0.995212] hisi_sas: driver version v1.6 [ 1.000798] libphy: Fixed MDIO Bus: probed [ 1.001254] tun: Universal TUN/TAP device driver, 1.6 [ 1.001257] tun: (C) 1999-2004 Max Krasnyansky [ 1.002003] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.002006] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.002038] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.002040] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.002073] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.002075] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.002105] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.002108] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.003806] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.003810] Extcon AUX1(HDMI) enable [ 1.004171] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.004283] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.004303] tegradc 15210000.nvdisplay: Display dc.ffffff800afd0000 registered with id=1 [ 1.004498] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.004504] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.012300] tegradc 15210000.nvdisplay: probed [ 1.012468] tegradc 15210000.nvdisplay: fb registered [ 1.016310] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.017537] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.018989] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.020439] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.027505] tegradc 15210000.nvdisplay: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 [ 1.036453] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.036923] Parent Clock set for DC plld3 [ 1.040501] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.041953] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.043402] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.044836] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.051894] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.061600] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.063063] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.064525] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.065988] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.073041] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.082750] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.084212] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.085674] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.087136] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.094188] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.103886] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.105293] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.106747] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.108199] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.115264] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.124310] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.132860] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.132865] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.136517] tegradc 15200000.nvdisplay: blank - powerdown [ 1.177731] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.177733] Extcon AUX1(HDMI) disable [ 1.206993] tegradc 15200000.nvdisplay: unblank [ 1.207223] Parent Clock set for DC plld2 [ 1.210440] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.211614] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.236832] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.236838] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.244832] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.244899] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.245533] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.246766] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.246993] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.247209] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 4d 4 [ 1.247233] Using phyrst_lpmode = 1 from DT [ 1.247265] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.247267] Extcon AUX1(HDMI) enable [ 1.247305] libphy: dwc_phy: probed [ 1.248458] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.249314] PPP generic driver version 2.4.2 [ 1.249432] PPP BSD Compression module registered [ 1.249434] PPP Deflate Compression module registered [ 1.249447] PPP MPPE Compression module registered [ 1.249450] NET: Registered protocol family 24 [ 1.249492] usbcore: registered new interface driver r8152 [ 1.249519] usbcore: registered new interface driver asix [ 1.249543] usbcore: registered new interface driver ax88179_178a [ 1.249564] usbcore: registered new interface driver cdc_ether [ 1.249586] usbcore: registered new interface driver net1080 [ 1.249607] usbcore: registered new interface driver cdc_subset [ 1.249627] usbcore: registered new interface driver zaurus [ 1.249656] usbcore: registered new interface driver cdc_ncm [ 1.249677] usbcore: registered new interface driver qmi_wwan_longsung [ 1.249687] GobiNet: Quectel_WCDMA<E_Linux&Android_GobiNet_Driver_V1.3.0 [ 1.249714] usbcore: registered new interface driver GobiNet [ 1.249924] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.249928] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.249935] VFIO - User Level meta-driver version: 0.3 [ 1.250588] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.250744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.250753] ehci-pci: EHCI PCI platform driver [ 1.250779] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.250783] ohci-pci: OHCI PCI platform driver [ 1.250816] ohci-platform: OHCI generic platform driver [ 1.252039] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.254401] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.254420] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.255755] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.255759] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.255851] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efa18800 id [ 1.256158] usbcore: registered new interface driver cdc_wdm [ 1.256266] usbcore: registered new interface driver uas [ 1.256307] usbcore: registered new interface driver usb-storage [ 1.256359] usbcore: registered new interface driver usbserial [ 1.256380] usbcore: registered new interface driver option [ 1.256398] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.256534] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.257591] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.257616] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.257630] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.258366] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.258397] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 1.258459] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.258583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.258587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.258590] usb usb1: Product: xHCI Host Controller [ 1.258593] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.258596] usb usb1: SerialNumber: 3530000.xhci [ 1.258926] hub 1-0:1.0: USB hub found [ 1.258955] hub 1-0:1.0: 4 ports detected [ 1.259509] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.259517] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.259584] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.259690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.259694] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.259697] usb usb2: Product: xHCI Host Controller [ 1.259700] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.259703] usb usb2: SerialNumber: 3530000.xhci [ 1.259998] hub 2-0:1.0: USB hub found [ 1.260588] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 1.260594] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.260602] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.260624] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.260634] hub 2-0:1.0: 3 ports detected [ 1.260844] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.261333] mousedev: PS/2 mouse device common for all mice [ 1.261392] usbcore: registered new interface driver xpad [ 1.261741] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.261821] Wake76 for irq=199 [ 1.261823] Wake77 for irq=199 [ 1.261825] Wake78 for irq=199 [ 1.261826] Wake79 for irq=199 [ 1.261827] Wake80 for irq=199 [ 1.261829] Wake81 for irq=199 [ 1.261830] Wake82 for irq=199 [ 1.261864] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.261868] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.261950] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.261955] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.262621] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.264071] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.265464] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.266911] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.266914] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.266917] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.266921] hpd: edid read prepare failed [ 1.266921] hpd: DC from connected to disconnected [ 1.282175] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.364190] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.364193] Extcon HDMI: HPD enabled [ 1.364213] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.364999] usb usb2: usb_suspend_both: status 0 [ 1.413559] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.414626] Wake73 for irq=42 [ 1.415873] rtc rtc1: alarm rtc device [ 1.415883] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.415899] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.416079] i2c /dev entries driver [ 1.417625] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.417874] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.417878] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.418294] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.442642] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.465838] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.465876] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.473576] imx219 10-0010: board setup failed [ 1.478104] imx219: probe of 10-0010 failed with error -121 [ 1.479271] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.483473] parse_throttle_dt_data: Num cap clks = 4 [ 1.483477] parse_throttle_dt_data: clk=mcpu type=1 [ 1.483480] parse_throttle_dt_data: clk=bcpu type=2 [ 1.483487] parse_throttle_dt_data: clk=gpu type=4 [ 1.483490] parse_throttle_dt_data: clk=emc type=3 [ 1.484204] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.484767] FAN dev name: pwm-fan [ 1.484839] FAN:gpio request success. [ 1.484847] FAN: can't find tach_gpio [ 1.484855] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.484875] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.485051] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.485056] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.485492] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.485497] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.485501] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.485505] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.485509] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.485512] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.485516] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.485519] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.485523] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.485526] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.486089] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.487053] device-mapper: uevent: version 1.0.3 [ 1.487421] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.487663] CPU EMC frequency mapping table: from device tree [ 1.489607] cpufreq: platform driver Initialization: pass [ 1.490161] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.490282] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.491103] sdhci: Secure Digital Host Controller Interface driver [ 1.491105] sdhci: Copyright(c) Pierre Ossman [ 1.491106] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.492081] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.493631] CMDQ: cmdq_platfm_init successful [ 1.494516] CQE: CMD_TIMING bit set for R1B DCMD [ 1.497007] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.502609] tegra-se-nvhost 15810000.se: initialized [ 1.503657] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.504104] tegra-se-nvhost 15820000.se: initialized [ 1.505038] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.505472] tegra-se-nvhost 15830000.se: initialized [ 1.506261] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.506700] tegra-se-nvhost 15840000.se: initialized [ 1.507615] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.508357] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.508485] hidraw: raw HID events driver (C) Jiri Kosina [ 1.509551] usbcore: registered new interface driver usbhid [ 1.509553] usbhid: USB HID core driver [ 1.514161] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.515821] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.516030] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.516163] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 1.517012] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 1.517088] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 1.517142] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 1.517196] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 1.517300] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 1.517611] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (49) [ 1.517613] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.518097] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.519669] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.520067] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.520458] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.520770] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.521547] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521550] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 1.521553] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.521598] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521600] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 1.521603] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.521644] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521646] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 1.521648] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.521702] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521705] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 1.521707] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.521748] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521750] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 1.521752] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.521794] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521799] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 1.521801] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.521842] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521846] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 1.521848] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.521888] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521893] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 1.521895] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.521936] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521941] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 1.521943] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.521983] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.521985] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 1.521987] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.522028] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.522033] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 1.522035] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.522082] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.522088] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 1.522089] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.522130] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.522135] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 1.522137] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.522176] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.522182] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 1.522184] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.522224] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.522229] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 1.522231] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.522284] **** A57 ECC: Enabled [ 1.522287] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 1.522349] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.522712] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.523140] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.523278] denver_knobs_init:MTS_VERSION:53679346 [ 1.525082] nvpmodel: initialized successfully [ 1.525859] trusty-virtio trusty:virtio: initializing [ 1.525962] trusty_ipc virtio0: vring0: va(pa) ffffffc0e9ca0000(0) qsz 32 notifyid 1 [ 1.525969] trusty_ipc virtio0: vring1: va(pa) ffffffc0e9ca2000(0) qsz 32 notifyid 2 [ 1.526032] trusty-virtio trusty:virtio: initializing done [ 1.526203] trusty_ipc virtio0: is online [ 1.527015] usbcore: registered new interface driver snd-usb-audio [ 1.527406] es8316_i2c_probe 1163========================================= [ 1.527409] es8316_i2c_probe 1168========================================= [ 1.527452] es8316_i2c_probe 1182========================================= [ 1.527459] es8316_i2c_probe 1237========================================= ret:0 [ 1.536843] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.544471] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.544597] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.548838] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.557403] OPE platform probe [ 1.557472] OPE platform probe successful [ 1.578526] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.584844] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.592158] mmc0: periodic cache flush enabled [ 1.592169] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.592491] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.592592] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.592685] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.592769] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.597740] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.606226] es8316_probe 1070========================================= [ 1.606388] es8316_probe 1082========================================= [ 1.610186] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.610190] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.610193] usb 1-2: Product: USB2.1 Hub [ 1.610195] usb 1-2: Manufacturer: GenesysLogic [ 1.610897] hub 1-2:1.0: USB hub found [ 1.611183] hub 1-2:1.0: 4 ports detected [ 1.612269] es8316_probe 1088========================================= [ 1.691026] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.721835] es8316_init_regs 967========================================= [ 1.723671] es8316_probe 1115=========================================ret:0 [ 1.725195] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 1.728433] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.728508] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.728582] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.728651] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.728888] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.728962] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.729028] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.729093] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.729163] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.729229] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.729300] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.729366] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.729434] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.729502] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.729571] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.729639] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.729712] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.729779] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.729845] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.729915] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.732722] es8316_set_dai_sysclk===========8316codec================== 586 [ 1.747871] usb 2-2: New USB device found, idVendor=05e3, idProduct=0626 [ 1.747876] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.747879] usb 2-2: Product: USB3.1 Hub [ 1.747882] usb 2-2: Manufacturer: GenesysLogic [ 1.751004] hub 2-2:1.0: USB hub found [ 1.751341] hub 2-2:1.0: 4 ports detected [ 1.754874] u32 classifier [ 1.754876] Actions configured [ 1.754936] Initializing XFRM netlink socket [ 1.755540] NET: Registered protocol family 10 [ 1.756117] NET: Registered protocol family 17 [ 1.756127] NET: Registered protocol family 15 [ 1.756184] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.756226] Bluetooth: RFCOMM socket layer initialized [ 1.756236] Bluetooth: RFCOMM ver 1.11 [ 1.756239] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.756244] Bluetooth: HIDP socket layer initialized [ 1.756258] 9pnet: Installing 9P2000 support [ 1.756293] Key type dns_resolver registered [ 1.756573] Registered cp15_barrier emulation handler [ 1.756593] Registered setend emulation handler [ 1.757643] registered taskstats version 1 [ 1.760122] isp 15600000.isp: initialized [ 1.763231] nvcsi 150c0000.nvcsi: initialized [ 1.765057] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.766648] Wake83 for irq=51 [ 1.766733] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.766864] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.768062] tegra-vi4 15700000.vi: initialized [ 1.768919] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.768931] tegra-vi4 15700000.vi: subdev imx219 9-0010 bound [ 1.769488] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.799133] tegra_rtc c2a0000.rtc: setting system clock to 2021-09-30 02:18:12 UTC (1632968292) [ 1.799872] mmcblk mmc0:0001: Card claimed for testing. [ 1.816866] bpmp: mounted debugfs mirror [ 1.817694] bwmgr: missing cdev-type property [ 1.820767] ALSA device list: [ 1.820770] #0: tegra-hda at 0x3518000 irq 382 [ 1.820772] #1: es8316-tegra [ 1.823058] Freeing unused kernel memory: 8640K [ 1.844394] Root device found: mmcblk0p1 [ 1.845495] Found dev node: /dev/mmcblk0p1 [ 1.864842] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 1.885222] usb 1-3: New USB device found, idVendor=1a40, idProduct=0201 [ 1.885227] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.885230] usb 1-3: Product: USB 2.0 Hub [MTT] [ 1.885930] hub 1-3:1.0: USB hub found [ 1.885988] hub 1-3:1.0: 7 ports detected [ 1.912844] usb 2-2: usb_suspend_both: status 0 [ 1.912991] usb usb2: usb_suspend_both: status 0 [ 1.915596] EXT4-fs (mmcblk0p1): 33 orphan inodes deleted [ 1.915598] EXT4-fs (mmcblk0p1): recovery complete [ 1.922480] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.924388] Rootfs mounted over mmcblk0p1 [ 1.938731] Switching from initrd to actual rootfs [ 1.988857] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 2.016660] usb 1-2.2: New USB device found, idVendor=413c, idProduct=2113 [ 2.016665] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.016668] usb 1-2.2: Product: Dell KB216 Wired Keyboard [ 2.021533] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:413C:2113.0001/input/input3 [ 2.042501] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.051157] cgroup: cgroup2: unknown option "nsdelegate" [ 2.064496] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.065276] systemd[1]: Detected architecture arm64. [ 2.081202] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2.2/input0 [ 2.083251] systemd[1]: Set hostname to . [ 2.085552] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2:1.1/0003:413C:2113.0002/input/input4 [ 2.106908] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.108869] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.121060] FAN rising trip_level:1 cur_temp:50600 trip_temps[2]:60000 [ 2.145019] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2.2/input1 [ 2.160795] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.160803] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.172834] usb 1-3.6: new high-speed USB device number 5 using tegra-xusb [ 2.193487] usb 1-3.6: New USB device found, idVendor=0bda, idProduct=b720 [ 2.193491] usb 1-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.193494] usb 1-3.6: Product: 802.11n WLAN Adapter [ 2.193497] usb 1-3.6: Manufacturer: Realtek [ 2.193499] usb 1-3.6: SerialNumber: 00e04c000001 [ 2.214559] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.214566] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.214569] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.214571] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.214575] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.214604] pci 0000:00:03.0: [10de:10e6] type 01 class 0x060400 [ 2.214716] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.214865] iommu: Adding device 0000:00:03.0 to group 54 [ 2.214872] arm-smmu: forcing sodev map for 0000:00:03.0 [ 2.214937] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.215085] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.215133] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.215196] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.215238] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.215527] pci 0000:01:00.0: supports D1 D2 [ 2.215529] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.215741] iommu: Adding device 0000:01:00.0 to group 55 [ 2.215745] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.224947] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.224988] pci 0000:00:03.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.224991] pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.224996] pci 0000:01:00.0: BAR 4: assigned [mem 0x40100000-0x40103fff 64bit] [ 2.225030] pci 0000:01:00.0: BAR 2: assigned [mem 0x40104000-0x40104fff 64bit] [ 2.225064] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.225076] pci 0000:00:03.0: PCI bridge to [bus 01] [ 2.225079] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 2.225087] pci 0000:00:03.0: bridge window [mem 0x40100000-0x401fffff] [ 2.225387] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 2.225390] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.225397] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 2.225471] aer 0000:00:03.0:pcie002: service driver aer loaded [ 2.225686] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.225736] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.239853] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.239957] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): bad mac address at /chosen/nvidia,ethernet-mac: missing. [ 2.251319] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Assigning random ethernet address 6a:66:ba:01:3c:d7 [ 2.251712] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.251727] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.267557] random: systemd: uninitialized urandom read (16 bytes read) [ 2.267770] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.267842] random: systemd: uninitialized urandom read (16 bytes read) [ 2.267860] systemd[1]: Reached target User and Group Name Lookups. [ 2.267891] random: systemd: uninitialized urandom read (16 bytes read) [ 2.267906] systemd[1]: Reached target Swap. [ 2.269436] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.270697] systemd[1]: Created slice User and Session Slice. [ 2.274971] random: crng init done [ 2.274975] random: 7 urandom warning(s) missed due to ratelimiting [ 2.282479] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 2.282518] tegradc 15210000.nvdisplay: blank - powerdown [ 2.282527] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 2.282530] Extcon DP: HPD disabled [ 2.282531] hpd: hpd_switch 0 [ 2.282534] hpd: switching from state 2 (Check EDID) to state 3 (Disabled) [ 2.300887] usb 1-2.3: new low-speed USB device number 6 using tegra-xusb [ 2.304632] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.329044] usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510 [ 2.329062] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.329065] usb 1-2.3: Product: USB Optical Mouse [ 2.329068] usb 1-2.3: Manufacturer: PixArt [ 2.332132] input: PixArt USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0003/input/input5 [ 2.332687] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3530000.xhci-2.3/input0 [ 2.570050] systemd-journald[2293]: Received request to flush runtime journal from PID 1 [ 2.995142] using random self ethernet address [ 3.002524] using random host ethernet address [ 3.653321] Mass Storage Function, version: 2009/09/11 [ 3.653327] LUN: removable file: (no medium) [ 3.658148] using random self ethernet address [ 3.667150] using random host ethernet address [ 3.756522] rndis0: HOST MAC 52:5b:cb:8c:63:b4 [ 3.757165] rndis0: MAC 52:5b:cb:8c:63:b5 [ 3.758128] usb0: HOST MAC 52:5b:cb:8c:63:b6 [ 3.758157] usb0: MAC 52:5b:cb:8c:63:b7 [ 3.758187] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.763446] l4tbr0: port 1(rndis0) entered blocking state [ 3.763451] l4tbr0: port 1(rndis0) entered disabled state [ 3.763970] device rndis0 entered promiscuous mode [ 3.773575] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.787025] l4tbr0: port 2(usb0) entered blocking state [ 3.787030] l4tbr0: port 2(usb0) entered disabled state [ 3.787178] device usb0 entered promiscuous mode [ 3.794959] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.967817] CPU1: shutdown [ 3.970723] android_work: did not send uevent (0 0 (null)) [ 3.975440] psci: CPU1 killed (polled 0 ms) [ 4.042241] CPU2: shutdown [ 4.045131] psci: CPU2 killed (polled 0 ms) [ 4.046838] android_work: sent uevent USB_STATE=CONNECTED [ 4.082190] android_work: sent uevent USB_STATE=DISCONNECTED [ 4.174768] android_work: sent uevent USB_STATE=CONNECTED [ 4.176402] configfs-gadget gadget: high-speed config #1: c [ 4.176438] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 4.176456] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 4.176472] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 4.176556] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 4.176574] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 4.176590] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 4.176621] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 4.176641] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 4.176662] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 4.176718] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 4.177064] android_work: sent uevent USB_STATE=CONFIGURED [ 4.189672] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.189692] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.189831] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 4.192383] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 4.192485] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 4.205678] zram: Added device: zram0 [ 4.212455] zram: Added device: zram1 [ 4.214050] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.214069] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.220745] zram: Added device: zram2 [ 4.224992] zram: Added device: zram3 [ 4.263979] zram0: detected capacity change from 0 to 501391360 [ 4.335493] Adding 489636k swap on /dev/zram0. Priority:5 extents:1 across:489636k SS [ 4.343446] zram1: detected capacity change from 0 to 501391360 [ 4.348046] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.350016] eth1: 0xffffff800be1c000, 96:44:19:58:f6:cf, IRQ 456 [ 4.367335] Adding 489636k swap on /dev/zram1. Priority:5 extents:1 across:489636k SS [ 4.371818] zram2: detected capacity change from 0 to 501391360 [ 4.384515] Adding 489636k swap on /dev/zram2. Priority:5 extents:1 across:489636k SS [ 4.393718] zram3: detected capacity change from 0 to 501391360 [ 4.409847] Adding 489636k swap on /dev/zram3. Priority:5 extents:1 across:489636k SS [ 4.427009] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.459244] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.774258] gpio tegra-gpio-aon wake51 for gpio=47(AA:7) [ 4.778513] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.074213] Bridge firewalling registered [ 5.149142] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.467937] tegradc 15200000.nvdisplay: blank - powerdown [ 5.511812] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.511827] Extcon AUX1(HDMI) disable [ 5.537494] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.537999] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.538176] tegradc 15200000.nvdisplay: unblank [ 5.538799] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.538874] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.539906] Parent Clock set for DC plld2 [ 5.543447] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 5.544674] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.585150] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.585152] Extcon AUX1(HDMI) enable [ 5.594815] tegradc 15200000.nvdisplay: sync windows ret = 248 [ 5.632427] bcpu-throttle-alert cooling device registered. [ 5.632614] mcpu-throttle-alert cooling device registered. [ 5.636520] gpu-throttle-alert cooling device registered. [ 5.682027] Netfilter messages via NETLINK v0.30. [ 5.691935] ctnetlink v0.93: registering with nfnetlink. [ 5.722301] usbcore: registered new interface driver btusb [ 5.731002] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 5.731008] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 5.754539] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 5.758610] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 5.758612] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 5.758613] rtk_btcoex: create workqueue [ 5.762214] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 5.762347] usbcore: registered new interface driver rtk_btusb [ 5.764149] bluetooth hci0: Falling back to user helper [ 6.077046] tegradc 15200000.nvdisplay: blank - powerdown [ 6.104017] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.105991] RTW: module init start [ 6.105994] RTW: rtl8723bu v5.8.4_33660.20190516_COEX20181129-7272 [ 6.105995] RTW: build time: Sep 8 2021 18:42:19 [ 6.105997] RTW: rtl8723bu BT-Coex version = COEX20181129-7272 [ 6.106022] RTW: rtw_inetaddr_notifier_register [ 6.106077] RTW: usb_endpoint_descriptor(0): [ 6.106078] RTW: bLength=7 [ 6.106080] RTW: bDescriptorType=5 [ 6.106080] RTW: bEndpointAddress=84 [ 6.106082] RTW: wMaxPacketSize=512 [ 6.106083] RTW: bInterval=0 [ 6.106084] RTW: RT_usb_endpoint_is_bulk_in = 4 [ 6.106084] RTW: usb_endpoint_descriptor(1): [ 6.106085] RTW: bLength=7 [ 6.106086] RTW: bDescriptorType=5 [ 6.106087] RTW: bEndpointAddress=5 [ 6.106088] RTW: wMaxPacketSize=512 [ 6.106088] RTW: bInterval=0 [ 6.106089] RTW: RT_usb_endpoint_is_bulk_out = 5 [ 6.106090] RTW: usb_endpoint_descriptor(2): [ 6.106091] RTW: bLength=7 [ 6.106091] RTW: bDescriptorType=5 [ 6.106092] RTW: bEndpointAddress=6 [ 6.106093] RTW: wMaxPacketSize=512 [ 6.106094] RTW: bInterval=0 [ 6.106094] RTW: RT_usb_endpoint_is_bulk_out = 6 [ 6.106095] RTW: usb_endpoint_descriptor(3): [ 6.106096] RTW: bLength=7 [ 6.106096] RTW: bDescriptorType=5 [ 6.106097] RTW: bEndpointAddress=87 [ 6.106098] RTW: wMaxPacketSize=64 [ 6.106099] RTW: bInterval=3 [ 6.106100] RTW: RT_usb_endpoint_is_int_in = 7, Interval = 3 [ 6.106100] RTW: usb_endpoint_descriptor(4): [ 6.106101] RTW: bLength=7 [ 6.106102] RTW: bDescriptorType=5 [ 6.106103] RTW: bEndpointAddress=8 [ 6.106103] RTW: wMaxPacketSize=512 [ 6.106104] RTW: bInterval=0 [ 6.106105] RTW: RT_usb_endpoint_is_bulk_out = 8 [ 6.106105] RTW: usb_endpoint_descriptor(5): [ 6.106106] RTW: bLength=7 [ 6.106107] RTW: bDescriptorType=5 [ 6.106108] RTW: bEndpointAddress=9 [ 6.106108] RTW: wMaxPacketSize=512 [ 6.106109] RTW: bInterval=0 [ 6.106110] RTW: RT_usb_endpoint_is_bulk_out = 9 [ 6.106111] RTW: nr_endpoint=6, in_num=2, out_num=4 [ 6.106112] RTW: USB_SPEED_HIGH [ 6.106113] RTW: CHIP TYPE: RTL8723BU [ 6.111574] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.111576] Extcon AUX1(HDMI) disable [ 6.126917] RTW: Chip Version Info: CHIP_8723B_T6_1T1R_RomVer(0) [ 6.126923] RTW: _ConfigChipOutEP_8723 OutEpQueueSel(0x07), OutEpNumber(4) [ 6.133111] RTW: EEPROM type is E-FUSE [ 6.134734] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.135124] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.135225] tegradc 15200000.nvdisplay: unblank [ 6.135744] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.135816] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.136945] Parent Clock set for DC plld2 [ 6.140466] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.141727] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 6.147129] RTW: Boot from EFUSE, Autoload OK ! [ 6.150043] RTW: hal_EfuseSwitchToBank: Efuse switch bank to 0 [ 6.183875] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.183878] Extcon AUX1(HDMI) enable [ 6.191865] tegradc 15200000.nvdisplay: sync windows ret = 248 [ 6.490225] RTW: hal_ReadEFuse_WiFi: data end at address=0x82 [ 6.490423] RTW: HW EFUSE [ 6.490436] RTW: 0x000: 29 81 03 7C 01 08 21 00 40 07 05 35 10 00 00 00 [ 6.490447] RTW: 0x010: 34 34 34 34 33 33 33 33 33 33 32 00 FF FF FF FF [ 6.490459] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490470] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 34 34 34 34 33 33 [ 6.490482] RTW: 0x040: 33 33 33 33 32 00 FF FF FF FF FF FF FF FF FF FF [ 6.490493] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490504] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490515] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490527] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490538] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490549] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490560] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 0B 1C 00 00 00 FF FF [ 6.490571] RTW: 0x0C0: FF 28 20 11 00 00 00 FF 00 FF FF FF FF FF FF FF [ 6.490583] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490594] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490605] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490616] RTW: 0x100: DA 0B 20 B7 E7 47 03 0C CF 89 58 E5 5A 09 03 52 [ 6.490627] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 6.490638] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 6.490650] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490661] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 6.490672] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490683] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490694] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490706] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490717] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490728] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490739] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490750] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490762] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490773] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490784] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 6.490787] RTW: EEPROM VID = 0x bda [ 6.490788] RTW: EEPROM PID = 0xb720 [ 6.490862] RTW: Hal_EfuseParseBTCoexistInfo_8723B: Enable BT-coex, ant_num=1 [ 6.490866] RTW: hal_com_config_channel_plan chplan:0x20 [ 6.490870] RTW: InitAdapterVariablesByPROM_8723BU(): REPLACEMENT = 0 [ 6.490873] RTW: rtw_hal_read_chip_info in 364 ms [ 6.490885] RTW: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13 [ 6.490891] RTW: [RF_PATH] IC's RF PATH:RF_1T1R, max_tx_cnt:1 [ 6.490892] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 6.490893] RTW: [RF_PATH] Registry's RF PATH:UNKNOWN [ 6.490894] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 6.490895] RTW: [RF_PATH] HALDATA's RF PATH:RF_1T1R [ 6.490896] RTW: [RF_PATH] NumTotalRFPath:1 [ 6.490898] RTW: rtw_hal_rfpath_init trx_path_bmp:0x11(RF_1T1R), NumTotalRFPath:1, max_tx_cnt:1 [ 6.490899] RTW: [TRX_Nss] HALSPEC - tx_nss :1, rx_nss:1 [ 6.490900] RTW: [TRX_Nss] Registry - tx_nss :0, rx_nss:0 [ 6.490901] RTW: [TRX_Nss] HALDATA - tx_nss :1, rx_nss:1 [ 6.490902] RTW: rtw_hal_trxnss_init tx_nss:1, rx_nss:1 [ 6.491001] RTW: init_mlme_default_rate_set: support CCK [ 6.491002] RTW: init_mlme_default_rate_set: support OFDM [ 6.491197] RTW: NR_RECVBUFF: 8 [ 6.491198] RTW: MAX_RECVBUF_SZ: 15360 [ 6.491203] RTW: NR_PREALLOC_RECV_SKB: 8 [ 6.491280] RTW: rtw_alloc_macid((null)) if1, mac_addr:ff:ff:ff:ff:ff:ff macid:1 [ 6.491283] RTW: rtw_init_pwrctrl_priv: IPS_mode=1, LPS_mode=2, LPS_level=0 [ 6.491291] RTW: IQK FW offload:disable [ 6.491295] RTW: Init_ODM_ComInfo_8723b(): Fv=0 Cv=0 [ 6.491333] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 6.491337] RTW: can't get autopm: [ 6.491340] RTW: rtw_macaddr_cfg mac addr:0c:cf:89:58:e5:5a [ 6.491342] RTW: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0 [ 6.491364] RTW: rtw_wiphy_alloc(phy0) [ 6.491367] RTW: rtw_wdev_alloc(padapter=ffffff800fcac000) [ 6.491370] RTW: rtw_wiphy_register(phy0) [ 6.491372] RTW: Register RTW cfg80211 vendor cmd(0x67) interface [ 6.491462] RTW: rtw_reg_notifier: NL80211_REGDOM_SET_BY_CORE [ 6.491599] RTW: rtw_ndev_init(wlan0) if1 mac_addr=0c:cf:89:58:e5:5a [ 6.491747] RTW: rtw_ndev_notifier_call(wlan0) state:16 [ 6.492246] RTW: cfg80211_rtw_get_txpower [ 6.492250] RTW: rtw_ndev_notifier_call(wlan0) state:5 [ 6.493453] RTW: cfg80211_rtw_get_txpower [ 6.494986] usbcore: registered new interface driver rtl8723bu [ 6.494989] RTW: module init ret=0 [ 6.813406] tegradc 15200000.nvdisplay: unblank [ 6.813414] tegradc 15210000.nvdisplay: blank - powerdown [ 7.455474] fuse init (API version 7.26) [ 7.734730] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 7.741304] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 7.742991] Bluetooth: hci0: rom_version status=0 version=1 [ 7.743008] Bluetooth: cfg_sz 0, total size 22496 [ 7.782858] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 7.784666] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.937925] RTW: rtw_reg_notifier: NL80211_REGDOM_SET_BY_CORE [ 7.999278] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.999400] RTW: rtw_ndev_notifier_call(wlan0) state:13 [ 7.999405] RTW: _netdev_open(wlan0) , bup=0 [ 7.999539] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 7.999541] RTW: MAC has not been powered on yet. [ 8.003790] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 8.008618] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 8.008624] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 8.008627] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 8.008629] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 8.057647] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070305 [ 8.058741] RTW: _8051Reset8723: Finish [ 8.088194] RTW: _FWFreeToGo: Polling FW ready OK! (298, 28ms), REG_MCUFWDL:0x000706c6 [ 8.088199] RTW: FWDL success. write_fw:1, 76ms [ 8.088263] RTW: <=== rtl8723b_FirmwareDownload() [ 8.088265] RTW: fw download ok! [ 8.713733] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 8.715744] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 8.732435] RTW: txpath=0x1, rxpath=0x1 [ 8.732439] RTW: txpath_1ss:0x1, num:1 [ 8.884026] RTW: rtl8723bu_hal_init in 884ms [ 8.884033] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 8.884914] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 8.884919] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 8.885104] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 8.886414] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 8.889821] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 8.890414] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 8.890806] RTW: Using the default RF gain. [ 8.890809] RTW: MAC Address = 0c:cf:89:58:e5:5a [ 8.890812] RTW: rtw_start_drv_threads(wlan0) enter [ 8.890813] RTW: rtw_start_drv_threads(wlan0) start RTW_CMD_THREAD [ 8.890948] RTW: rtw_cfg80211_init_wiphy:rf_type=0 [ 8.890951] RTW: [HT] HAL Support STBC = 0x01 [ 8.890958] RTW: -871x_drv - drv_open, bup=1 [ 8.891020] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.891028] RTW: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1 [ 8.891031] RTW: rtw_ndev_notifier_call(wlan0) state:1 [ 8.891354] RTW: cfg80211_rtw_get_txpower [ 8.900592] RTW: cfg80211_rtw_get_txpower [ 8.900636] RTW: cfg80211_rtw_get_txpower [ 8.901477] RTW: cfg80211_rtw_get_txpower [ 8.901517] RTW: cfg80211_rtw_get_txpower [ 8.902609] RTW: cfg80211_rtw_get_txpower [ 8.902675] RTW: rtw_ndev_notifier_call(wlan0) state:4 [ 8.917328] RTW: cfg80211_rtw_flush_pmksa(wlan0) [ 8.948593] RTW: rtw_ndev_notifier_call(wlan0) state:4 [ 8.948996] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.950314] RTW: cfg80211_rtw_scan(wlan0) [ 8.950450] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 8.958667] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 9.066243] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 9.170250] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 9.274233] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 9.378190] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 9.482174] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 9.586219] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 9.692341] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 9.784762] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.784772] Bluetooth: BNEP socket layer initialized [ 9.802495] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 9.910211] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 10.014161] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 10.122435] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 10.123698] l4tbr0: port 2(usb0) entered blocking state [ 10.123703] l4tbr0: port 2(usb0) entered forwarding state [ 10.123769] l4tbr0: port 1(rndis0) entered blocking state [ 10.123772] l4tbr0: port 1(rndis0) entered forwarding state [ 10.125645] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 10.125668] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 10.231543] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 10.338163] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 10.343309] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 10.343377] RTW: survey done event(7) band:0 for wlan0 [ 10.344419] RTW: rtw_indicate_scan_done(wlan0) [ 10.344910] RTW: ==>rtw_ps_processor .fw_state(8) [ 10.346549] RTW: ==>ips_enter cnts:1 [ 10.346552] RTW: nolinked power save enter [ 10.346554] RTW: ===> rtw_ips_pwr_down................... [ 10.346556] RTW: ====> rtw_ips_dev_unload... [ 10.348990] RTW: usb_read_port_cancel [ 10.349265] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.349672] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.349919] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.350194] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.350441] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.350729] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.350985] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.351263] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 10.351287] RTW: usb_write_port_cancel [ 10.351307] RTW: ==> rtl8723bu_hal_deinit [ 10.351313] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 10.351316] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 10.366304] RTW: <=== rtw_ips_pwr_down..................... in 20ms [ 12.110863] RTW: cfg80211_rtw_scan(wlan0) [ 12.110872] RTW: _rtw_pwr_wakeup call ips_leave.... [ 12.110876] RTW: ==>ips_leave cnts:1 [ 12.110878] RTW: ===> rtw_ips_pwr_up.............. [ 12.110887] RTW: ===> ips_netdrv_open......... [ 12.111045] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 12.111048] RTW: MAC has not been powered on yet. [ 12.119082] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 12.120137] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 12.120141] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 12.120145] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 12.120147] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 12.141643] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605 [ 12.143101] RTW: _8051Reset8723: Finish [ 12.172265] RTW: _FWFreeToGo: Polling FW ready OK! (426, 28ms), REG_MCUFWDL:0x000706c6 [ 12.172270] RTW: FWDL success. write_fw:1, 52ms [ 12.172340] RTW: <=== rtl8723b_FirmwareDownload() [ 12.172342] RTW: fw download ok! [ 12.265844] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.265902] tegra_machine_dai_init===========8316=======es8316-playback=========== 355 [ 12.265906] es8316_set_dai_sysclk===========8316codec================== 586 [ 12.416916] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.416972] tegra_machine_dai_init===========8316=======es8316-playback=========== 355 [ 12.416975] es8316_set_dai_sysclk===========8316codec================== 586 [ 12.545292] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.545349] tegra_machine_dai_init===========8316=======es8316-playback=========== 355 [ 12.545352] es8316_set_dai_sysclk===========8316codec================== 586 [ 12.557002] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.557054] tegra_machine_dai_init===========8316=======es8316-playback=========== 355 [ 12.557057] es8316_set_dai_sysclk===========8316codec================== 586 [ 12.716656] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.716711] tegra_machine_dai_init===========8316=======es8316-playback=========== 355 [ 12.716714] es8316_set_dai_sysclk===========8316codec================== 586 [ 12.776920] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 12.778799] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 12.783038] RTW: txpath=0x1, rxpath=0x1 [ 12.783042] RTW: txpath_1ss:0x1, num:1 [ 12.929920] RTW: rtl8723bu_hal_init in 820ms [ 12.929928] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 12.930672] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 12.930676] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 12.930862] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 12.932076] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 12.935407] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 12.935990] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 12.937336] RTW: Using the default RF gain. [ 12.937450] RTW: <=== rtw_ips_pwr_up.............. in 828ms [ 12.937453] RTW: nolinked power save leave [ 12.941117] RTW: ==> ips_leave.....LED(0x00e28282)... [ 12.950887] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 12.955271] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 13.062142] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 13.166181] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 13.270177] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 13.374307] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 13.478214] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 13.582211] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 13.686184] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 13.790458] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 13.898241] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 14.002150] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 14.106178] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 14.210162] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 14.314158] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 14.322101] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 14.322171] RTW: survey done event(6) band:0 for wlan0 [ 14.323234] RTW: rtw_indicate_scan_done(wlan0) [ 14.324874] RTW: ==>rtw_ps_processor .fw_state(8) [ 14.328639] RTW: ==>ips_enter cnts:2 [ 14.328643] RTW: nolinked power save enter [ 14.328645] RTW: ===> rtw_ips_pwr_down................... [ 14.328647] RTW: ====> rtw_ips_dev_unload... [ 14.331637] RTW: usb_read_port_cancel [ 14.331921] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.332195] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.332463] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.332728] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.333004] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.333646] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.333898] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.334169] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 14.334182] RTW: usb_write_port_cancel [ 14.334205] RTW: ==> rtl8723bu_hal_deinit [ 14.334211] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 14.334215] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 14.348934] RTW: <=== rtw_ips_pwr_down..................... in 24ms [ 33.865391] vdd-3v3-disp-cvb: disabling [ 33.865406] vdd-3v3-cvb: disabling [ 33.865415] vdd-1v8-cvb: disabling [ 33.865428] vdd_sys_en: disabling [ 33.865453] spmic-ldo1: disabling [ 33.865676] vddio-sdmmc1: disabling [ 33.865843] vdd-sys-bl: disabling [ 35.123271] RTW: cfg80211_rtw_scan(wlan0) [ 35.123298] RTW: _rtw_pwr_wakeup call ips_leave.... [ 35.123311] RTW: ==>ips_leave cnts:2 [ 35.123322] RTW: ===> rtw_ips_pwr_up.............. [ 35.123351] RTW: ===> ips_netdrv_open......... [ 35.123761] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 35.123773] RTW: MAC has not been powered on yet. [ 35.131462] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 35.133895] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 35.133911] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 35.133931] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 35.133940] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 35.168151] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605 [ 35.170372] RTW: _8051Reset8723: Finish [ 35.199537] RTW: _FWFreeToGo: Polling FW ready OK! (207, 32ms), REG_MCUFWDL:0x000706c6 [ 35.199552] RTW: FWDL success. write_fw:1, 64ms [ 35.199695] RTW: <=== rtl8723b_FirmwareDownload() [ 35.199703] RTW: fw download ok! [ 35.842388] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 35.844518] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 35.848909] RTW: txpath=0x1, rxpath=0x1 [ 35.848912] RTW: txpath_1ss:0x1, num:1 [ 35.997562] RTW: rtl8723bu_hal_init in 876ms [ 35.997570] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 35.998466] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 35.998469] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 35.998702] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 36.000097] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 36.003964] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 36.004651] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 36.005142] RTW: Using the default RF gain. [ 36.005239] RTW: <=== rtw_ips_pwr_up.............. in 884ms [ 36.005241] RTW: nolinked power save leave [ 36.005330] RTW: ==> ips_leave.....LED(0x00e28282)... [ 36.009307] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 36.014344] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 36.122949] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 36.231489] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 36.339449] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 36.447421] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 36.555407] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 36.663395] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 36.771440] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 36.879410] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 36.987436] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 37.095427] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 37.203371] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 37.311485] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 37.419232] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 37.430648] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 37.430810] RTW: survey done event(6) band:0 for wlan0 [ 37.433086] RTW: rtw_indicate_scan_done(wlan0) [ 37.437048] RTW: ==>rtw_ps_processor .fw_state(8) [ 37.440255] RTW: ==>ips_enter cnts:3 [ 37.440264] RTW: nolinked power save enter [ 37.440271] RTW: ===> rtw_ips_pwr_down................... [ 37.440277] RTW: ====> rtw_ips_dev_unload... [ 37.443046] RTW: usb_read_port_cancel [ 37.443344] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.445128] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.445428] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.445676] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.445968] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.446215] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.446495] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.446751] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 37.446769] RTW: usb_write_port_cancel [ 37.446794] RTW: ==> rtl8723bu_hal_deinit [ 37.446800] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 37.446804] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 37.462283] RTW: <=== rtw_ips_pwr_down..................... in 24ms [ 68.181193] RTW: cfg80211_rtw_scan(wlan0) [ 68.181221] RTW: _rtw_pwr_wakeup call ips_leave.... [ 68.181234] RTW: ==>ips_leave cnts:3 [ 68.181244] RTW: ===> rtw_ips_pwr_up.............. [ 68.181275] RTW: ===> ips_netdrv_open......... [ 68.181651] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 68.181661] RTW: MAC has not been powered on yet. [ 68.190310] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 68.192463] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 68.192477] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 68.192498] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 68.192508] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 68.227939] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605 [ 68.230962] RTW: _8051Reset8723: Finish [ 68.260143] RTW: _FWFreeToGo: Polling FW ready OK! (214, 32ms), REG_MCUFWDL:0x000706c6 [ 68.260158] RTW: FWDL success. write_fw:1, 68ms [ 68.260316] RTW: <=== rtl8723b_FirmwareDownload() [ 68.260325] RTW: fw download ok! [ 68.903434] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 68.905555] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 68.909687] RTW: txpath=0x1, rxpath=0x1 [ 68.909690] RTW: txpath_1ss:0x1, num:1 [ 69.058141] RTW: rtl8723bu_hal_init in 880ms [ 69.058146] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 69.058933] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 69.058936] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 69.059147] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 69.060536] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 69.064361] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 69.065034] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 69.065462] RTW: Using the default RF gain. [ 69.065566] RTW: <=== rtw_ips_pwr_up.............. in 884ms [ 69.065568] RTW: nolinked power save leave [ 69.065640] RTW: ==> ips_leave.....LED(0x00e28282)... [ 69.069662] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 69.074711] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 69.180102] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 69.288791] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 69.396801] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 69.504816] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 69.612725] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 69.720799] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 69.828799] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 69.936890] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 70.044926] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 70.152863] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 70.261116] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 70.368820] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 70.477158] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 70.488449] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 70.488614] RTW: survey done event(8) band:0 for wlan0 [ 70.490926] RTW: rtw_indicate_scan_done(wlan0) [ 70.498573] RTW: ==>rtw_ps_processor .fw_state(8) [ 70.501000] RTW: ==>ips_enter cnts:4 [ 70.501008] RTW: nolinked power save enter [ 70.501015] RTW: ===> rtw_ips_pwr_down................... [ 70.501021] RTW: ====> rtw_ips_dev_unload... [ 70.503694] RTW: usb_read_port_cancel [ 70.503981] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.504275] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.505781] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.506088] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.506367] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.506657] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.506952] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.507383] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 70.507410] RTW: usb_write_port_cancel [ 70.507434] RTW: ==> rtl8723bu_hal_deinit [ 70.507441] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 70.507446] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 70.522545] RTW: <=== rtw_ips_pwr_down..................... in 24ms [ 111.186535] RTW: cfg80211_rtw_scan(wlan0) [ 111.186563] RTW: _rtw_pwr_wakeup call ips_leave.... [ 111.186576] RTW: ==>ips_leave cnts:4 [ 111.186585] RTW: ===> rtw_ips_pwr_up.............. [ 111.186615] RTW: ===> ips_netdrv_open......... [ 111.187059] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 111.187070] RTW: MAC has not been powered on yet. [ 111.194032] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 111.196188] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 111.196202] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 111.196223] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 111.196232] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 111.230984] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605 [ 111.233715] RTW: _8051Reset8723: Finish [ 111.262935] RTW: _FWFreeToGo: Polling FW ready OK! (216, 32ms), REG_MCUFWDL:0x000706c6 [ 111.262949] RTW: FWDL success. write_fw:1, 64ms [ 111.263085] RTW: <=== rtl8723b_FirmwareDownload() [ 111.263093] RTW: fw download ok! [ 111.906005] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 111.908002] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 111.912407] RTW: txpath=0x1, rxpath=0x1 [ 111.912410] RTW: txpath_1ss:0x1, num:1 [ 112.061274] RTW: rtl8723bu_hal_init in 876ms [ 112.061279] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 112.062147] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 112.062150] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 112.062352] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 112.063738] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 112.067554] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 112.068185] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 112.068618] RTW: Using the default RF gain. [ 112.068722] RTW: <=== rtw_ips_pwr_up.............. in 884ms [ 112.068724] RTW: nolinked power save leave [ 112.068798] RTW: ==> ips_leave.....LED(0x00e28282)... [ 112.072957] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 112.078801] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 112.186350] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 112.295128] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 112.403217] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 112.511048] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 112.619097] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 112.727092] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 112.835073] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 112.943174] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 113.051023] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 113.159176] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 113.271216] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 113.383219] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 113.491212] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 113.502798] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 113.502957] RTW: survey done event(a) band:0 for wlan0 [ 113.505543] RTW: rtw_indicate_scan_done(wlan0) [ 113.508689] RTW: ==>rtw_ps_processor .fw_state(8) [ 113.512344] RTW: ==>ips_enter cnts:5 [ 113.512352] RTW: nolinked power save enter [ 113.512359] RTW: ===> rtw_ips_pwr_down................... [ 113.512366] RTW: ====> rtw_ips_dev_unload... [ 113.516466] RTW: usb_read_port_cancel [ 113.516762] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.517285] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.517623] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.517902] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.518192] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.518484] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.519957] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.520254] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 113.520310] RTW: usb_write_port_cancel [ 113.520339] RTW: ==> rtl8723bu_hal_deinit [ 113.520386] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 113.520390] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 113.536401] RTW: <=== rtw_ips_pwr_down..................... in 24ms [ 164.195324] RTW: cfg80211_rtw_scan(wlan0) [ 164.195350] RTW: _rtw_pwr_wakeup call ips_leave.... [ 164.195364] RTW: ==>ips_leave cnts:5 [ 164.195375] RTW: ===> rtw_ips_pwr_up.............. [ 164.195405] RTW: ===> ips_netdrv_open......... [ 164.195835] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 164.195847] RTW: MAC has not been powered on yet. [ 164.203860] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 164.206359] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 164.206374] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 164.206394] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 164.206403] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 164.241243] RTW: polling_fwdl_chksum: Checksum report OK! (1, 4ms), REG_MCUFWDL:0x00070605 [ 164.243332] RTW: _8051Reset8723: Finish [ 164.272538] RTW: _FWFreeToGo: Polling FW ready OK! (205, 28ms), REG_MCUFWDL:0x000706c6 [ 164.272553] RTW: FWDL success. write_fw:1, 64ms [ 164.272696] RTW: <=== rtl8723b_FirmwareDownload() [ 164.272705] RTW: fw download ok! [ 164.919099] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 164.921254] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 164.925499] RTW: txpath=0x1, rxpath=0x1 [ 164.925502] RTW: txpath_1ss:0x1, num:1 [ 165.074157] RTW: rtl8723bu_hal_init in 880ms [ 165.074162] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 165.074872] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 165.074875] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 165.075094] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 165.076463] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 165.080638] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 165.081404] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 165.081848] RTW: Using the default RF gain. [ 165.081949] RTW: <=== rtw_ips_pwr_up.............. in 888ms [ 165.081950] RTW: nolinked power save leave [ 165.082026] RTW: ==> ips_leave.....LED(0x00e28282)... [ 165.086633] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 165.091891] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 165.199110] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 165.307743] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 165.415616] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 165.523744] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 165.631750] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 165.739787] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 165.847714] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 165.955739] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 166.063704] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 166.171707] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 166.279724] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 166.387775] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 166.495746] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 166.507365] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 166.507533] RTW: survey done event(6) band:0 for wlan0 [ 166.510020] RTW: rtw_indicate_scan_done(wlan0) [ 166.513341] RTW: ==>rtw_ps_processor .fw_state(8) [ 166.516450] RTW: ==>ips_enter cnts:6 [ 166.516461] RTW: nolinked power save enter [ 166.516470] RTW: ===> rtw_ips_pwr_down................... [ 166.516479] RTW: ====> rtw_ips_dev_unload... [ 166.519623] RTW: usb_read_port_cancel [ 166.519924] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.520239] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.521472] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.521728] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.522025] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.522275] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.522566] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.522820] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 166.522836] RTW: usb_write_port_cancel [ 166.522866] RTW: ==> rtl8723bu_hal_deinit [ 166.522873] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 166.522878] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 166.540166] RTW: <=== rtw_ips_pwr_down..................... in 24ms [ 227.216354] RTW: cfg80211_rtw_scan(wlan0) [ 227.216363] RTW: _rtw_pwr_wakeup call ips_leave.... [ 227.216366] RTW: ==>ips_leave cnts:6 [ 227.216368] RTW: ===> rtw_ips_pwr_up.............. [ 227.216376] RTW: ===> ips_netdrv_open......... [ 227.216601] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 227.216606] RTW: MAC has not been powered on yet. [ 227.221631] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 227.223830] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 227.223840] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 227.223855] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 227.223862] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 227.258301] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605 [ 227.260355] RTW: _8051Reset8723: Finish [ 227.289584] RTW: _FWFreeToGo: Polling FW ready OK! (206, 28ms), REG_MCUFWDL:0x000706c6 [ 227.289599] RTW: FWDL success. write_fw:1, 64ms [ 227.290054] RTW: <=== rtl8723b_FirmwareDownload() [ 227.290065] RTW: fw download ok! [ 227.935592] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 227.937672] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 227.941538] RTW: txpath=0x1, rxpath=0x1 [ 227.941540] RTW: txpath_1ss:0x1, num:1 [ 228.089627] RTW: rtl8723bu_hal_init in 872ms [ 228.089633] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 228.090450] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 228.090454] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 228.090678] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 228.091848] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 228.095622] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:5a [ 228.096248] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 228.096685] RTW: Using the default RF gain. [ 228.096788] RTW: <=== rtw_ips_pwr_up.............. in 880ms [ 228.096790] RTW: nolinked power save leave [ 228.096860] RTW: ==> ips_leave.....LED(0x00e28282)... [ 228.100966] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 228.105947] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 228.211484] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 228.320378] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 228.428307] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 228.536378] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 228.644145] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 228.752298] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 228.860303] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 228.968346] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 229.076274] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 229.184292] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 229.292226] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 229.399837] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 229.508267] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 229.520319] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 229.520489] RTW: survey done event(a) band:0 for wlan0 [ 229.523366] RTW: rtw_indicate_scan_done(wlan0) [ 229.526031] RTW: ==>rtw_ps_processor .fw_state(8) [ 229.528824] RTW: ==>ips_enter cnts:7 [ 229.528833] RTW: nolinked power save enter [ 229.528840] RTW: ===> rtw_ips_pwr_down................... [ 229.528847] RTW: ====> rtw_ips_dev_unload... [ 229.531526] RTW: usb_read_port_cancel [ 229.531827] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.532154] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.532458] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.532756] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.533051] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.533351] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.533609] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.533894] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 229.533915] RTW: usb_write_port_cancel [ 229.533946] RTW: ==> rtl8723bu_hal_deinit [ 229.533953] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 229.533959] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 229.552145] RTW: <=== rtw_ips_pwr_down..................... in 24ms