xavier login: .646] I> MB1 (prd-version: 1.5.1.2-t194-41334769-9ec1833d) [0009.652] I> Boot-mode: Platform RCM [0009.655] I> Chip revision : A02 [0009.658] I> Bootrom patch version : 7 (correctly patched) [0009.663] I> ATE fuse revision : 0x200 [0009.667] I> Ram repair fuse : 0x0 [0009.670] I> Ram Code : 0x0 [0009.672] I> rst_source : 0x0 [0009.675] I> rst_level : 0x0 [0009.679] I> USB configuration success [0011.698] I> mb2 image downloaded [0011.712] I> Recovery boot mode 0 [0011.716] I> Boot-device: eMMC [0011.721] I> UPHY full init done [0011.725] I> MB1 done [0011.730] W> Profiler not initialized [0011.733] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-) [0011.741] W> Profiler not initialized [0011.745] I> DMA Heap @ [0x40020000 - 0x40065800] [0011.749] I> Default Heap @ [0xd486400 - 0xd48a400] [0011.754] W> Profiler not initialized [0011.757] W> Profiler not initialized [0011.761] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0011.766] W> device prod register failed [0011.770] W> Profiler not initialized [0012.000] I> sdmmc DDR50 mode [0012.004] I> No supported QSPI flash found [0012.008] E> QSPI Flash: Insufficient flash size (0 MB) [0012.013] I> QSPI Flash is not present. [0012.064] E> Link startup dme_set failed [0012.068] E> UFS initialization failed [0012.071] I> UFS is not present [0012.074] W> Profiler not initialized [0012.081] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0012.089] I> Found 42 partitions in SDMMC_USER (instance 3) [0012.095] W> Profiler not initialized [0012.098] W> Profiler not initialized [0012.102] W> Profiler not initialized [0012.105] I> Entering 3p server [0012.109] I> USB configuration success [0012.756] I> Populate eeprom info [0012.761] I> Populate eeprom info for module cvm [0012.814] I> Rebooting : reboot-recovery [001 MB1 binary ratchet value 4 is too large than ratchet level 1 from HW fuses. [0008.837] I> MB1 (prd-version: 1.5.1.2-t194-41334769-9ec1833d) [0008.842] I> Boot-mode: RCM [0008.845] I> Chip revision : A02 [0008.848] I> Bootrom patch version : 7 (correctly patched) [0008.853] I> ATE fuse revision : 0x200 [0008.856] I> Ram repair fuse : 0x0 [0008.859] I> Ram Code : 0x0 [0008.862] I> rst_source : 0xb [0008.865] I> rst_level : 0x1 [0008.868] I> USB configuration success [0014.818] I> bct_bootrom image downloaded [0014.830] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0014.837] I> Temperature = 26500 [0014.840] W> Skipping boost for clk: BPMP_CPU_NIC [0014.845] W> Skipping boost for clk: BPMP_APB [0014.849] W> Skipping boost for clk: AXI_CBB [0014.853] W> Skipping boost for clk: AON_CPU_NIC [0014.857] W> Skipping boost for clk: CAN1 [0014.861] W> Skipping boost for clk: CAN2 [0014.865] I> Boot-device: eMMC [0014.868] I> Boot-device: eMMC [0014.871] I> bct_mb1 image downloaded [0014.884] I> ECC region[0]: Start:0x0, End:0x0 [0014.888] I> ECC region[1]: Start:0x0, End:0x0 [0014.892] I> ECC region[2]: Start:0x0, End:0x0 [0014.897] I> ECC region[3]: Start:0x0, End:0x0 [0014.901] I> ECC region[4]: Start:0x0, End:0x0 [0014.905] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0014.911] I> Non-ECC region[1]: Start:0x0, End:0x0 [0014.915] I> Non-ECC region[2]: Start:0x0, End:0x0 [0014.920] I> Non-ECC region[3]: Start:0x0, End:0x0 [0014.924] I> Non-ECC region[4]: Start:0x0, End:0x0 [0014.930] E> FAILED: Thermal config [0014.938] E> FAILED: MEMIO rail config [0014.951] I> bct_mem image downloaded [0016.409] I> blob image downloaded [0016.424] I> Recovery boot mode 0 [0016.487] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0016.496] I> Welcome to MB2(TBoot-BPMP) Recovery (version: 00.00.2018.32-mob) [0016.496] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0016.497] I> Default Heap @ [0xd486400 - 0xd48a400] [0016.498] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0016.504] W> device prod register failed [0016.509] I> parsing oem signed section of bpmp-fw header done [0016.516] I> bpmp-fw binary copied from blob [0016.518] I> oem authentication of bpmp-fw header done [0016.523] I> bpmp-fw: Authentication init Done [0016.527] I> parsing oem signed section of cpubl header done [0016.533] I> cpubl binary copied from blob [0016.537] I> bpmp-fw: Authentication Finalize Done [0016.541] I> oem authentication of cpubl header done [0016.546] I> cpubl: Authentication init Done [0016.550] I> parsing oem signed section of tos header done [0016.556] I> tos binary copied from blob [0016.559] I> Relocating BR-BCT [0016.562] I> cpubl: Authentication Finalize Done [0016.567] I> oem authentication of tos header done [0016.571] I> tos: Authentication init Done [0016.575] I> parsing oem signed section of bpmp-fw-dtb header done [0016.583] I> bpmp-fw-dtb binary copied from blob [0016.586] I> tos: Authentication Finalize Done [0016.591] I> oem authentication of bpmp-fw-dtb header done [0016.595] I> bpmp-fw-dtb: Authentication init Done [0016.600] I> parsing oem signed section of cpubl-dtb header done [0016.607] I> cpubl-dtb binary copied from blob [0016.610] I> bpmp-fw-dtb: Authentication Finalize Done [0016.750] I> oem authentication of cpubl-dtb header done [0016.750] I> cpubl-dtb: Authentication init Done [0016.751] I> parsing oem signed section of eks header done [0016.752] I> eks binary copied from blob [0016.752] I> cpubl-dtb: Authentication Finalize Done [0016.753] I> oem authentication of eks header done [0016.753] I> eks: Authentication init Done [0016.757] I> eks: Authentication Finalize Done [0016.761] I> EKB detected (length: 0x410) @ VA:0x526fb600 ��NOTICE: BL31: v1.3(release):23b153a63 NOTICE: BL31: Built : 22:43:07, Dec 9 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea88ed58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is c1b4e372932429f2737cf722e1219e71 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized /uphy is not enabled status = disabled uphy_dt initialized uphy initialized safereg initialized �� ��mrq initialized ��[0017.218] I> Welcome to TBoot-CPU Recovery ��fmon_post initialized ��[0017.218] I> Heap: [0xa4000000 ... 0xaa000000 [0017.221] I> gpio framework initialized [0017.233] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' drir [0017.238] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon'r [0017.240] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 ��clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0017.252] E> fetch_driver_phandle_from_dt: failed to get node with compatibl9 [0017.324] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0017.327] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0017.333] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0017.341] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 ��emc_debugfs initialized ��[0017.349] E> fetch_driver_phandle_from_dt: failed to get node with compatibl9 ��dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0017.357] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0017.414] I> fixed regulator driver initialized [0017.428] I> CPU: Nvidia Carmel [0017.429] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000 [0017.429] I> chip revision : A02 [0017.429] I> Boot-device: eMMC [0017.430] I> Boot_device: SDMMC_BOOT instance: 3 [0017.877] I> sdmmc-3 params source = boot args [0017.877] I> sdmmc bdev is already initialized [0017.877] I> sdmmc-3 params source = boot args [0017.904] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0017.917] I> Found 42 partitions in SDMMC_USER (instance 3) [0017.917] I> Recovery boot_type: 0 [0017.917] I> Entering 3p server [0017.918] I> USB configuration success [0017.952] I> Writing CPUBL-CFG partition. om HW fuses. [0000.064] I> MB1 (prd-version: 1.5.1.2-t194-41334769-9ec1833d) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 7 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.084] I> Ram repair fuse : 0x0 [0000.087] I> Ram Code : 0x0 [0000.089] I> rst_source : 0xb [0000.092] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.115] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 30000 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.144] W> Skipping boost for clk: BPMP_APB [0000.148] W> Skipping boost for clk: AXI_CBB [0000.152] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.160] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.167] I> Boot-device: eMMC [0000.175] I> Sdmmc: HS400 mode enabled [0000.179] I> ECC region[0]: Start:0x0, End:0x0 [0000.183] I> ECC region[1]: Start:0x0, End:0x0 [0000.187] I> ECC region[2]: Start:0x0, End:0x0 [0000.191] I> ECC region[3]: Start:0x0, End:0x0 [0000.195] I> ECC region[4]: Start:0x0, End:0x0 [0000.199] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.205] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.210] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.214] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.219] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.224] E> FAILED: Thermal config [0000.231] E> FAILED: MEMIO rail config [0000.245] I> Boot-device: eMMC [0000.254] I> sdmmc bdev is already initialized [0000.324] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.333] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-fc460) [0000.333] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.334] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.334] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.340] W> device prod register failed [0000.344] I> Boot-device: eMMC [0000.347] I> Boot_device: SDMMC_BOOT instance: 3 [0000.353] I> sdmmc-3 params source = boot args [0000.356] I> sdmmc bdev is already initialized [0000.360] I> sdmmc-3 params source = boot args [0000.367] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.374] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.376] W> No valid slot number is found in scratch register [0000.381] W> Return default slot: _a [0000.384] I> Active Boot chain : 0 [0000.388] I> parsing oem signed section of bpmp-fw header done [0000.393] I> bpmp-fw binary init read from storage [0000.398] I> oem authentication of bpmp-fw header done [0000.405] I> bpmp-fw binary done read from storage [0000.408] I> bpmp-fw: Authentication init Done [0000.412] I> parsing oem signed section of cpubl header done [0000.417] I> cpubl binary init read from storage [0000.422] I> bpmp-fw: Authentication Finalize Done [0000.427] I> oem authentication of cpubl header done [0000.431] I> cpubl binary done read from storage [0000.436] I> cpubl: Authentication init Done [0000.440] I> parsing oem signed section of rce header done [0000.445] I> rce binary init read from storage [0000.450] I> Relocating BR-BCT [0000.453] I> cpubl: Authentication Finalize Done [0000.457] I> oem authentication of rce header done [0000.461] I> rce binary done read from storage [0000.466] I> rce: Authentication init Done [0000.470] I> parsing oem signed section of ape header done [0000.475] I> ape binary init read from storage [0000.479] I> rce: Authentication Finalize Done [0000.484] I> oem authentication of ape header done [0000.488] I> ape binary done read from storage [0000.492] I> ape: Authentication init Done [0000.497] I> parsing oem signed section of tos header done [0000.502] I> tos binary init read from storage [0000.506] I> ape: Authentication Finalize Done [0000.511] I> oem authentication of tos header done [0000.515] I> tos binary done read from storage [0000.519] I> tos: Authentication init Done [0000.523] I> parsing oem signed section of bpmp-fw-dtb header done [0000.529] I> bpmp-fw-dtb binary init read from storage [0000.534] I> tos: Authentication Finalize Done [0000.540] I> oem authentication of bpmp-fw-dtb header done [0000.544] I> bpmp-fw-dtb binary done read from storage [0000.549] I> bpmp-fw-dtb: Authentication init Done [0000.554] I> parsing oem signed section of cpubl-dtb header done [0000.559] I> cpubl-dtb binary init read from storage [0000.564] I> bpmp-fw-dtb: Authentication Finalize Done [0000.601] I> oem authentication of cpubl-dtb header done [0000.601] I> cpubl-dtb binary done read from storage [0000.602] I> cpubl-dtb: Authentication init Done [0000.604] I> parsing oem signed section of eks header done [0000.604] I> eks binary init read from storage [0000.605] I> cpubl-dtb: Authentication Finalize Done [0000.606] I> oem authentication of eks header done [0000.609] I> eks binary done read from storage [0000.614] I> eks: Authentication init Done [0000.618] I> eks: Authentication Finalize Done [0000.622] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):23b153a63 NOTICE: BL31: Built : 22:43:07, Dec 9 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea88ed58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is c1b4e372932429f2737cf722e1219e71 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg initialized mrq initialized �� [0001.085] I> Welcome to Cboot [0001.086] I> Cboot Version: t194-8a9e8a5a��fmon_post initialized �� [0001.086] I> CPU-BL Params @ 0xf2820000 [0001.086] I> 0) Base:0x00000000 Size:0x00000000 [0001.088] I> 1) Base:0xf1100000 Size:0x00100000 [0001.092] I> 2) Base:0xf2000000 Size:0x00200000 [0001.096] I> 3) Base:0xf1200000 Size:0x00200000 [0001.101] I> 4) Base:0xf1000000 Size:0x00100000 [0001.105] I> 5) Base:0xf0f00000 Size:0x00100000��clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized �� [0001.175] I> 6) Base:0xf3800000 Size:0x00400000 [0001.179] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.184] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.188] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.193] I> 10) Base:0xf3000000 Size:0x00800000 [0001.197] I> 11) Base:0x40000000 Size:0x00040000 [0001.201] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.206] I> 13) Base:0x40046000 Size:0x00002000 [0001.210] I> 14) Base:0x40048000 Size:0x00002000 [0001.215] I> 15) Base:0xac000000 Size:0x00004000 [0001.219] I> 16) Base:0x4004a000 Size:0x00002000 ��emc_debugfs initialized ��[0001.224] I> 17) Base:0xf0b00000 Size:0x00100000��dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] �� [0001.279] I> 18) Base:0x4004c000 Size:0x00002000 [0001.283] I> 19) Base:0xf2200000 Size:0x00600000 [0001.288] I> 20) Base:0x4004e000 Size:0x00002000 [0001.292] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.297] I> 22) Base:0x00000000 Size:0x00000000 [0001.301] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.306] I> 24) Base:0xf6000000 Size:0x02000000 [0001.310] I> 25) Base:0x40050000 Size:0x00002000 [0001.315] I> 26) Base:0x40040000 Size:0x00006000 [0001.319] I> 27) Base:0xf1800000 Size:0x00400000 [0001.324] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.328] I> 29) Base:0xf1400000 Size:0x00400000 [0001.333] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.337] I> 31) Base:0x00000000 Size:0x00000000 [0001.341] I> 32) Base:0xf8000000 Size:0x08000000 [0001.346] I> 33) Base:0x00000000 Size:0x00000000 [0001.350] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.355] I> 35) Base:0xab000000 Size:0x01000000 [0001.359] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.364] I> 37) Base:0xf2800000 Size:0x00800000 [0001.368] I> 38) Base:0x80000000 Size:0x20000000 [0001.373] I> 39) Base:0xb0000000 Size:0x08000000 [0001.377] I> 40) Base:0x00000000 Size:0x00000000 [0001.382] I> 41) Base:0x00000000 Size:0x00000000 [0001.386] I> 42) Base:0x00000000 Size:0x00000000 [0001.391] I> 43) Base:0x00000000 Size:0x00000000 [0001.395] I> 44) Base:0x00000000 Size:0x00000000 [0001.399] I> 45) Base:0x00000000 Size:0x00000000 [0001.404] GIC-SPI Target CPU: 0 [0001.407] Interrupts Init done [0001.410] calling constructors [0001.413] initializing heap [0001.415] I> Heap: [0xa0690588 ... 0xab000000] [0001.420] initializing threads [0001.422] initializing timers [0001.425] creating bootstrap completion thread [0001.430] top of bootstrap2() [0001.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.437] initializing platform [0001.440] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.445] W> device prod register failed [0001.449] I> Bl_dtb @0xaaf00000 [0001.457] E> "plugin-manager" doesn't exist, creating [0001.458] E> "ids" doesn't exist, creating [0001.462] E> "connection" doesn't exist, creating [0001.466] E> "configs" doesn't exist, creating [0001.478] I> Find /i2c@3160000's alias i2c0 [0001.478] I> Reading eeprom i2c=0 address=0x50 [0001.504] I> Device at /i2c@3160000:0x50 [0001.504] I> Reading eeprom i2c=0 address=0x56 [0001.528] I> Device at /i2c@3160000:0x56 [0001.530] I> Find /i2c@3180000's alias i2c2 [0001.530] I> Reading eeprom i2c=2 address=0x54 [0001.532] E> I2C: slave not found in slaves. [0001.533] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start t. [0001.534] E> I2C_DEV: Failed to send register address 0x00000000. [0001.534] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 a. [0001.542] E> eeprom: Failed to read I2C slave device [0001.547] I> Eeprom read failed 0x3526070d [0001.551] I> Reading eeprom i2c=2 address=0x57 [0001.556] E> I2C: slave not found in slaves. [0001.560] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start t. [0001.568] E> I2C_DEV: Failed to send register address 0x00000000. [0001.573] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae a. [0001.583] E> eeprom: Failed to read I2C slave device [0001.587] I> Eeprom read failed 0x3526070d [0001.591] I> Reading eeprom i2c=2 address=0x52 [0001.596] E> I2C: slave not found in slaves. [0001.600] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start t. [0001.608] E> I2C_DEV: Failed to send register address 0x00000000. [0001.613] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 a. [0001.623] E> eeprom: Failed to read I2C slave device [0001.627] I> Eeprom read failed 0x3526070d [0001.633] I> Find /i2c@c240000's alias i2c1 [0001.635] I> Reading eeprom i2c=1 address=0x52 [0001.641] E> I2C: slave not found in slaves. [0001.644] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start t. [0001.652] E> I2C_DEV: Failed to send register address 0x00000000. [0001.657] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 a. [0001.667] E> eeprom: Retry to read I2C slave device. [0001.672] E> I2C: slave not found in slaves. [0001.676] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start t. [0001.684] E> I2C_DEV: Failed to send register address 0x00000000. [0001.689] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 a. [0001.699] E> eeprom: Failed to read I2C slave device [0001.703] I> Eeprom read failed 0x3526070d [0001.707] I> Reading eeprom i2c=1 address=0x50 [0001.712] E> I2C: slave not found in slaves. [0001.716] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start t. [0001.724] E> I2C_DEV: Failed to send register address 0x00000000. [0001.729] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 a. [0001.739] E> eeprom: Retry to read I2C slave device. [0001.744] E> I2C: slave not found in slaves. [0001.748] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start t. [0001.756] E> I2C_DEV: Failed to send register address 0x00000000. [0001.761] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 a. [0001.771] E> eeprom: Failed to read I2C slave device [0001.775] I> Eeprom read failed 0x3526070d [0001.779] I> create_pm_ids: id: 2888-0001-400-J, len: 15 [0001.784] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03 [0001.795] I> create_pm_ids: id: 2822-0000-600-D, len: 15 [0001.801] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03 [0001.812] I> Adding plugin-manager/ids/2888-0001-400=/i2c@3160000:module@0x50 [0001.819] E> "i2c@3160000" doesn't exist, creating [0001.823] E> "module@0x50" doesn't exist, creating [0001.828] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0001.835] E> "module@0x56" doesn't exist, creating [0001.843] I> Adding plugin-manager/cvm [0001.844] E> "chip-id" doesn't exist, creating [0001.847] I> Adding plugin-manager/chip-id/A02 [0001.852] I> Plugin-manager override starting [0001.858] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.867] I> node /plugin-manager/fragement-soft-wdt matches [0001.877] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.882] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.901] I> Disable plugin-manager status in FDT [0001.901] I> Plugin-manager override finished successfully [0001.901] I> gpio framework initialized [0001.904] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' drir [0001.906] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon'r [0001.908] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.916] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0001.924] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0001.929] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.935] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0001.944] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0001.951] E> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0001.957] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.965] I> fixed regulator driver initialized [0001.975] I> register 'maxim' power off handle [0001.976] I> virtual i2c enabled [0001.976] I> registered 'maxim,max20024' pmic [0001.979] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0001.986] I> Boot-device: eMMC [0001.989] I> Boot_device: SDMMC_BOOT instance: 3 [0001.998] I> sdmmc-3 params source = boot args [0001.998] I> sdmmc bdev is already initialized [0002.002] I> sdmmc-3 params source = boot args [0002.032] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.045] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.057] I> enabling 'vdd-hdmi-5v0' regulator [0002.064] I> regulator 'vdd-hdmi-5v0' already enabled [0002.064] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.065] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.071] E> invalid display type [0002.076] E> invalid display type [0002.078] E> cannot find any other nvdisp nodes [0002.078] E> no valid display unit config found in dtb [0002.079] W> display init failed [0002.080] I> Load in CBoot Boot Options partition and parse it [0002.081] E> Cannot read beyond partition boundary for CPUBL-CFG [0002.087] E> tegrabl_read_cbo Failed to read CPUBL-CFG partition [0002.093] W> platform_init: tegrabl_read_cbo failed with error 0xd0d0104 [0002.099] I> Hit any key to stop autoboot: 4 3 2 1 [0004.107] initializing target [0004.107] calling apps_init() [0004.108] starting app kernel_boot_app [0004.127] I> found decompressor handler: lz4-legacy [0004.128] I> decompressing BMP blob ... [0004.133] I> Kernel type = Normal [0004.133] I> Loading partition kernel-bootctrl at 0xa42b0000 from device(0x1) [0004.140] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.140] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.141] I> ########## SD boot ########## [0004.141] I> No sdcard [0004.141] I> -0 params source = [0004.144] E> Blockdev open: exit error [0004.148] E> SD boot failed, err: 724238353 [0004.152] I> ########## USB boot ########## [0004.161] W> No valid slot number is found in scratch register [0004.161] W> Return default slot: _a [0004.177] I> USB Firmware Version: 60.06 release [0004.234] I> regulator of usb2-0 already enabled [0004.243] I> regulator of usb2-1 already enabled [0004.252] I> regulator of usb2-2 already enabled [0004.264] I> enabling 'vdd-5v-sata' regulator [0005.332] I> USB 2.0 port 4 new full-speed USB device detected [0005.334] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069a3000 [0005.335] E> slot id is 1 [0005.336] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069a3000 [0005.341] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069a3000 [0005.345] I> [0005.345] I> Enumerated USB Device 0000:0000 [0005.349] I> [0005.351] E> Empty host context, host driver not loaded? [0005.356] E> USBMSD: Failed to initialize usb host driver context empty. [0005.363] E> USBMSD: Failed to open usbmsd open, 0. [0005.367] E> Error opening USBMSD driver 0, err: 7c7c0312 [0005.373] E> Failed to initialize device 5-0 [0005.377] E> USB boot failed, err: 2088502034 [0005.381] I> ########## Fixed storage boot ########## [0005.386] I> Already published: 00010003 [0005.390] I> Look for boot partition [0005.393] I> Fallback: assuming 0th partition is boot partition [0005.399] I> Detect filesystem [0005.426] I> Loading extlinux.conf ... [0005.426] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.463] I> L4T boot options [0005.463] I> [1]: "redhawk trace" [0005.463] I> [2]: "primary kernel" [0005.464] I> Enter choice: [0008.465] I> Continuing with default option: 1 [0008.465] I> Loading kernel sig file from rootfs ... [0008.465] I> rootfs path: /sdmmc_user/boot/Image-4.9.140-rt94-r32.3.1-tegra-Reg [0014.687] I> lookup_linear_dir:436: Invalid file block num [0014.688] I> ext2_walk:142: 'Image-4.9.140-rt94-r32.3.1-tegra-RedHawk-7.5.2-trd [0014.688] I> ext4_open_file:638: '/boot/Image-4.9.140-rt94-r32.3.1-tegra-RedHad [0014.689] E> file /sdmmc_user/boot/Image-4.9.140-rt94-r32.3.1-tegra-RedHawk-7.! [0014.696] W> Failed to load kernel sig file (err=202113041) [0014.701] I> Loading kernel binary from rootfs ... [0014.706] I> rootfs path: /sdmmc_user/boot/Image-4.9.140-rt94-r32.3.1-tegra-Ree [0014.883] I> Validate kernel ... [0014.884] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0014.884] E> Stage2Signature validation failed with SHA2!! [0014.885] C> OEM authentication of kernel header failed! [0014.885] W> Failed to validate kernel binary (err=1077936152) [0014.885] W> Security fuse not burned, continue to boot [0014.902] I> No kernel-dtb binary path [0014.902] I> Loading kernel-dtb binary from partition ... [0014.903] W> No valid slot number is found in scratch register [0014.904] W> Return default slot: _a [0014.907] I> A/B: bin_type (38) slot 0 [0014.911] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0014.927] I> Validate kernel-dtb ... [0014.927] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0014.933] I> Loading ramdisk from rootfs ... [0014.933] I> rootfs path: /sdmmc_user/boot/initrd.img-4.9.140-rt94-r32.3.1-tege [0015.051] I> Kernel hdr @0xa42b0000 [0015.051] I> Kernel dtb @0x90000000 [0015.052] I> decompressor handler not found [0015.052] I> Copying kernel image (24963080 bytes) from 0xa42b0000 to 0x800800e [0015.058] I> Updated bpmp info to DTB [0015.059] I> Ramdisk: Base: 0x92000000; Size: 0xfd1af2 [0015.060] I> Updated initrd info to DTB [0015.060] W> WARN: Fail to override "console=none" in commandline [0015.064] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display paras [0015.072] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display paras [0015.079] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display paras [0015.086] W> No valid slot number is found in scratch register [0015.092] W> Return default slot: _a [0015.095] I> Active slot suffix: [0015.098] I> add_boot_slot_suffix: slot_suffix = [0015.103] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 co [0015.137] I> Updated bootarg info to DTB [0015.140] W> MAC addr invalid! [0015.143] E> Failed to get WIFI MAC address [0015.147] W> MAC addr invalid! [0015.150] E> Failed to get Bluetooth MAC address [0015.155] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:cb:ab:b4 [0015.161] E> "plugin-manager" doesn't exist, creating [0015.166] I> Adding /chosen/plugin-manager/cvm [0015.170] E> "chip-id" doesn't exist, creating [0015.174] I> Adding /chosen/plugin-manager/chip-id [0015.179] E> "configs" doesn't exist, creating [0015.183] I> Adding /chosen/plugin-manager/configs [0015.188] E> "ids" doesn't exist, creating [0015.192] I> Adding /chosen/plugin-manager/ids [0015.196] E> "odm-data" doesn't exist, creating [0015.200] I> Adding /chosen/plugin-manager/odm-data [0015.209] E> "memory" doesn't exist, creating [0015.210] I> [0] START: 0x80000000, END: 0xac000000 [0015.214] I> [1] START: 0xac004000, END: 0xf09d0000 [0015.219] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0015.223] I> dram_block larger than 80000000 [0015.227] I> [3] START: 0x100000000, END: 0x480000000 [0015.232] I> added [base:0x80000000, size:0x2c000000] to /memory [0015.238] I> added [base:0xac200000, size:0x44600000] to /memory [0015.244] I> added [base:0x100000000, size:0x380000000] to /memory [0015.251] I> Updated memory info to DTB [0015.254] E> add_disp_param: failed to get display params for du=0 [0015.260] E> "reset" doesn't exist, creating [0015.265] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0015.269] I> Enabled cpu-0 (mpidr: 0x0) node in FDT [0015.273] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0015.278] I> Enabled cpu-1 (mpidr: 0x1) node in FDT [0015.283] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0015.288] I> Enabled cpu-2 (mpidr: 0x100) node in FDT [0015.292] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0015.297] I> Enabled cpu-3 (mpidr: 0x101) node in FDT [0015.302] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0015.307] I> Enabled cpu-4 (mpidr: 0x200) node in FDT [0015.312] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0015.316] I> Enabled cpu-5 (mpidr: 0x201) node in FDT [0015.321] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0015.326] I> Enabled cpu-6 (mpidr: 0x300) node in FDT [0015.331] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0015.336] I> Enabled cpu-7 (mpidr: 0x301) node in FDT [0015.342] E> "misc-data" doesn't exist, creating [0015.345] I> Boot-device: eMMC [0015.348] I> Add boot-sdmmc to plugin-manager/misc-data [0015.353] I> Add storage-sdmmc to plugin-manager/misc-data [0015.358] W> Unknown storage device [0015.362] I> Add serial number:0423618000917 as DT property [0015.368] I> Plugin-manager override starting [0015.372] I> node /plugin-manager/fragement-tegra-wdt-en matches [0015.379] I> node /plugin-manager/fragement-soft-wdt matches [0015.387] I> node /plugin-manager/fragment-pcie-c5-rp matches [0015.391] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0015.402] I> Disable plugin-manager status in FDT [0015.403] I> Plugin-manager override finished successfully [0015.405] I> tegrabl_load_kernel_and_dtb: Done [0015.409] E> tegrabl_display_clear: display is not initialized [0015.414] W> Boot logo display failed... [0015.418] I> Kernel EP: 0x80080000, DTB: 0x90000000 Booting Linux on physical CPU 0x0 Linux version 4.9.140-rt94-r32.3.1-tegra-RedHawk-7.5.2-trace (root@mystique) (g0 Boot CPU: AArch64 Processor [4e0f0040] OF: fdt:memory scan node memory, reg size 48, OF: fdt: - 80000000 , 2c000000 OF: fdt: - ac200000 , 44600000 OF: fdt: - 100000000 , 380000000 earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') bootconsole [tegra_comb_uart0] enabled ��WARNING: pll_d2 has no dyn ramp ��cgroup: cgroup2: unknown option "nsdelegate" random: crng init done random: 7 urandom warning(s) missed due to ratelimiting using random self ethernet address using random host ethernet address using random self ethernet address using random host ethernet address RedHawk Linux release 7.5.2 (Rey) on an aarch64 xavier login: