[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140 (ai@ai-ATC-8010) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #2 SMP PREEMPT Thu Jun 18 09:27:26 CST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29432(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7968880K/8220672K available (15294K kernel code, 2934K rwdata, 6652K rodata, 8576K init, 609K bss, 186256K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f3c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001619] Console: colour dummy device 80x25 [ 0.001625] console [tty0] enabled [ 0.001628] bootconsole [uart8250] disabled [ 0.001635] kmemleak: Kernel memory leak detector disabled [ 0.001644] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001652] pid_max: default: 32768 minimum: 301 [ 0.001966] Security Framework initialized [ 0.002123] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002127] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002741] ftrace: allocating 47094 entries in 184 pages [ 0.127817] sched-energy: Sched-energy-costs installed from DT [ 0.127827] ASID allocator initialised with 65536 entries [ 0.164051] tegra-id: chipid=21817. [ 0.164056] tegra-id: opt_subrevision=1. [ 0.164074] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.164081] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.164087] DTB Build time: Jun 18 2020 15:42:13 [ 0.209677] CPU1: Booted secondary processor [4e0f0030] [ 0.241319] CPU2: Booted secondary processor [4e0f0030] [ 0.273104] CPU3: Booted secondary processor [411fd073] [ 0.305083] CPU4: Booted secondary processor [411fd073] [ 0.337072] CPU5: Booted secondary processor [411fd073] [ 0.337125] Brought up 6 CPUs [ 0.337129] SMP: Total of 6 processors activated. [ 0.337134] CPU features: detected feature: 32-bit EL0 Support [ 0.337849] CPU: All CPU(s) started at EL2 [ 0.337898] alternatives: patching kernel code [ 0.340765] devtmpfs: initialized [ 0.379442] Initilizing CustomIPI irq domain [ 0.379667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.379676] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.380526] pinctrl core: initialized pinctrl subsystem [ 0.380731] OS set in device tree is not L4T. [ 0.380919] regulator-dummy: no parameters [ 0.381052] Initializing plugin-manager [ 0.381118] Plugin module not found [ 0.381157] Plugin-manager status disabled [ 0.382935] NET: Registered protocol family 16 [ 0.383613] pstore: using zlib compression [ 0.383626] console [pstore-1] enabled [ 0.383629] pstore: Registered ramoops as persistent store backend [ 0.383632] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.397119] cpuidle: using governor menu [ 0.398629] bpmp: waiting for handshake [ 0.398634] bpmp: handshake completed [ 0.398651] bpmp: synchronizing channels [ 0.398678] bpmp: channels synchronized [ 0.398681] bpmp: mail init ok [ 0.400714] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.400719] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.400723] arm-smmu 12000000.iommu: stage 1 translation [ 0.400726] arm-smmu 12000000.iommu: stage 2 translation [ 0.400729] arm-smmu 12000000.iommu: nested translation [ 0.400735] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.400740] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.400744] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.400748] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.400751] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.402863] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.402876] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.405272] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.407149] Registering BPMP clocks... [ 0.407238] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.408163] Serial: AMBA PL011 UART driver [ 0.409306] tegra_powergate_init: DONE [ 0.409314] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.409320] DTB Build time: Jun 18 2020 15:42:13 [ 0.411419] Tegra reboot handler registered. [ 0.412972] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.413036] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.413048] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.413050] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.413053] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.413207] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.413218] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.413547] iommu: Adding device 3460000.sdhci to group 0 [ 0.414231] iommu: Adding device 3400000.sdhci to group 1 [ 0.415266] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.415278] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.415717] iommu: Adding device 3160000.i2c to group 3 [ 0.416146] iommu: Adding device c240000.i2c to group 4 [ 0.416485] iommu: Adding device 3180000.i2c to group 5 [ 0.416853] iommu: Adding device 3190000.i2c to group 6 [ 0.417275] iommu: Adding device 31b0000.i2c to group 7 [ 0.417608] iommu: Adding device 31c0000.i2c to group 8 [ 0.417932] iommu: Adding device c250000.i2c to group 9 [ 0.418262] iommu: Adding device 31e0000.i2c to group 10 [ 0.419724] iommu: Adding device 3210000.spi to group 11 [ 0.420054] iommu: Adding device c260000.spi to group 12 [ 0.420401] iommu: Adding device 3240000.spi to group 13 [ 0.421128] iommu: Adding device 3100000.serial to group 14 [ 0.421467] iommu: Adding device 3110000.serial to group 15 [ 0.421795] iommu: Adding device c280000.serial to group 16 [ 0.422125] iommu: Adding device 3130000.serial to group 17 [ 0.423477] iommu: Adding device 2490000.ether_qos to group 18 [ 0.423491] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.424160] iommu: Adding device b000000.rtcpu to group 19 [ 0.426394] iommu: Adding device 13e10000.host1x to group 20 [ 0.426700] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.426997] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.427302] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.427598] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.427894] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.428204] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.428499] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.428824] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.429299] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.429942] iommu: Adding device 15700000.vi to group 30 [ 0.430292] iommu: Adding device 15600000.isp to group 31 [ 0.430745] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.431345] iommu: Adding device 15340000.vic to group 33 [ 0.431561] iommu: Adding device 154c0000.nvenc to group 34 [ 0.431776] iommu: Adding device 15480000.nvdec to group 35 [ 0.432125] iommu: Adding device 15380000.nvjpg to group 36 [ 0.432339] iommu: Adding device 15500000.tsec to group 37 [ 0.432553] iommu: Adding device 15100000.tsecb to group 38 [ 0.433262] iommu: Adding device 15810000.se to group 39 [ 0.433477] iommu: Adding device 15820000.se to group 40 [ 0.433684] iommu: Adding device 15830000.se to group 41 [ 0.433892] iommu: Adding device 15840000.se to group 42 [ 0.434777] iommu: Adding device smmu_test to group 43 [ 0.435359] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c10000 [ 0.435369] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c20000 [ 0.435379] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.435389] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.435400] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c50000 [ 0.435409] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.435417] mc-err: mcerr ops are set to t18x [ 0.435554] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.436636] iommu: Adding device 3530000.xhci to group 44 [ 0.436647] arm-smmu: forcing sodev map for 3530000.xhci [ 0.437119] iommu: Adding device 3550000.xudc to group 45 [ 0.437132] arm-smmu: forcing sodev map for 3550000.xudc [ 0.437832] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.437838] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.438402] iommu: Adding device 17000000.gp10b to group 46 [ 0.439424] tegra-reset 5000000.clock: registered 193 resets. [ 0.441654] iommu: Adding device d000000.bpmp to group 47 [ 0.441857] bpmp: ping status is 0 [ 0.441960] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.444471] bpmp d000000.bpmp: probe ok [ 0.447624] iommu: Adding device 2600000.dma to group 48 [ 0.448898] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.448930] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.448960] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.448987] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.449016] GPIO line 424 (wifi-enable) hogged as output/high [ 0.449044] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.449071] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.449224] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.452970] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.453107] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.454697] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.454711] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.455032] iommu: Adding device sound to group 50 [ 0.455379] iommu: Adding device 3510000.hda to group 51 [ 0.462899] iommu: Adding device c1a0000.aon to group 52 [ 0.463334] vdd-ac-bat: 5000 mV [ 0.465016] vdd-1v8-ap: 1800 mV [ 0.489164] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.491875] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.492056] SCSI subsystem initialized [ 0.492168] libata version 3.00 loaded. [ 0.492316] usbcore: registered new interface driver usbfs [ 0.492346] usbcore: registered new interface driver hub [ 0.492414] usbcore: registered new device driver usb [ 0.494834] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 0.494865] pca953x 0-0074: failed reading register [ 0.494917] pca953x: probe of 0-0074 failed with error -121 [ 0.495241] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.495269] pca953x 0-0077: failed reading register [ 0.495308] pca953x: probe of 0-0077 failed with error -121 [ 0.495780] random: fast init done [ 0.505055] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.509267] vddio-ddr: at 1125 mV [ 0.513131] avdd_dsi_csi: 1200 mV [ 0.517115] vdd-1v8: 1800 mV [ 0.521114] vdd-3v3-sys: 3300 mV [ 0.522233] spmic-ldo0: at 1800 mV [ 0.522938] spmic-ldo1: at 800 mV [ 0.525114] vddio-3v3: 3300 mV [ 0.525843] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.529115] vdd-rtc: at 800 mV [ 0.529855] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.533116] spmic-ldo6: at 1500 mV [ 0.537115] vdd-pex-1v00: 1000 mV [ 0.537733] dvdd-pex: 1000 mV [ 0.539970] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.540121] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.540316] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.540550] max77620 4-003c: max77620 probe successful [ 0.540954] media: Linux media interface: v0.10 [ 0.541012] Linux video capture interface: v2.00 [ 0.544699] pps_core: LinuxPPS API ver. 1 registered [ 0.544702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.544718] PTP clock support registered [ 0.544899] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.545094] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.545122] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.546473] trusty trusty: trusty version: Built: 18:08:29 Apr 8 2020 [ 0.546487] trusty trusty: selected api version: 3 (requested 3) [ 0.547373] Advanced Linux Sound Architecture Driver Initialized. [ 0.547826] Bluetooth: Core ver 2.22 [ 0.547883] NET: Registered protocol family 31 [ 0.547886] Bluetooth: HCI device and connection manager initialized [ 0.547893] Bluetooth: HCI socket layer initialized [ 0.547897] Bluetooth: L2CAP socket layer initialized [ 0.547911] Bluetooth: SCO socket layer initialized [ 0.548623] en-vdd-sd: 3300 mV [ 0.548992] vdd-usb0-5v: 5000 mV [ 0.549331] vdd-usb1-5v: 5000 mV [ 0.549791] vdd-3v3: 3300 mV [ 0.550059] en-vdd-vcm-2v8: 2800 mV [ 0.550290] vdd-sys-bl: 3300 mV [ 0.552503] camchar: rtcpu character device driver loaded [ 0.553026] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.554737] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.555433] clocksource: Switched to clocksource arch_sys_counter [ 0.577398] VFS: Disk quotas dquot_6.6.0 [ 0.577468] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.577705] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.578203] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.578208] nvmap_page_pool_init: Total RAM pages: 2008604 [ 0.578212] nvmap_page_pool_init: nvmap page pool size: 251075 pages (980 MB) [ 0.578277] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.580798] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.586380] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.586554] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.586928] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.586999] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.587103] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.587206] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.587359] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.587583] la/ptsa driver initialized. [ 0.587593] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.587595] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.587888] NET: Registered protocol family 2 [ 0.588479] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.588783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.589373] TCP: Hash tables configured (established 65536 bind 65536) [ 0.589424] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.589538] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.589864] NET: Registered protocol family 1 [ 0.590287] RPC: Registered named UNIX socket transport module. [ 0.590290] RPC: Registered udp transport module. [ 0.590292] RPC: Registered tcp transport module. [ 0.590294] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.590300] PCI: CLS 0 bytes, default 64 [ 0.590413] Trying to unpack rootfs image as initramfs... [ 0.755394] Freeing initrd memory: 5432K [ 0.771211] host1x 13e10000.host1x: initialized [ 0.772331] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.774418] audit: initializing netlink subsys (disabled) [ 0.774443] audit: type=2000 audit(0.664:1): initialized [ 0.774865] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.781375] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.782342] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.782840] 9p: Installing v9fs 9p2000 file system support [ 0.785012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.785098] io scheduler noop registered [ 0.785303] io scheduler cfq registered (default) [ 0.788498] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.854983] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 0.858780] iommu: Adding device 2993000.adsp to group 54 [ 0.858878] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.861270] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 0.865361] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.866536] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.867599] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.868625] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.870961] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.871944] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.872290] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.872346] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.872457] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.872463] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 0.874666] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.875953] tsec 15500000.tsec: initialized [ 0.877010] tsec 15100000.tsecb: initialized [ 0.880412] nvdec 15480000.nvdec: initialized [ 0.886473] falcon 15340000.vic: initialized [ 0.887775] falcon 154c0000.nvenc: initialized [ 0.889032] falcon 15380000.nvjpg: initialized [ 0.890888] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.892482] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.893889] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.895306] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.896769] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.898180] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.899612] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.901051] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.904177] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.904184] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.904217] tegradccommon 15200000.dc_common: dma mapping done [ 0.904379] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=390 [ 0.904863] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.904905] generic_infoframe_type: 0x87 [ 0.904982] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.905001] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 0.905024] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 0.905225] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 0.905240] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 0.905388] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 0.905392] tegra_cec 3960000.tegra_cec: probed [ 0.913394] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.913398] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.913401] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.913592] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.913597] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.914397] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 0.917147] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.917151] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.919905] tegradc 15210000.nvdisplay: probed [ 0.920240] Console: switching to colour frame buffer device 80x30 [ 0.920260] tegradc 15210000.nvdisplay: fb registered [ 0.920432] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.921209] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.921816] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.921842] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.922241] kfuse 3830000.kfuse: initialized [ 0.923549] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.926261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.928530] console [ttyS0] disabled [ 0.928565] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 0.955461] console [ttyS0] enabled [ 0.956802] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 0.957656] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 0.957822] serial-tegra 3130000.serial: RX in PIO mode [ 0.958543] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 0.959544] [drm] Initialized [ 0.966244] brd: module loaded [ 0.969651] loop: module loaded [ 0.969714] tegra_profiler: version: 1.141, samples/io: 48/28 [ 0.969786] tegra_profiler: auth: init [ 0.970094] nct1008_nct72 7-004c: starting parse dt [ 0.970186] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 0.970191] nct1008_nct72 7-004c: success parsing dt [ 0.970284] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 0.970591] THERMAL EST: found 3 subdevs [ 0.970595] THERMAL EST num_resources: 0 [ 0.970599] [THERMAL EST subdev 0] [ 0.970603] [THERMAL EST subdev 1] [ 0.970606] [THERMAL EST subdev 2] [ 0.970937] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 0.970940] THERMAL EST: thz register success. [ 0.971025] THERMAL EST: end of probe, return err: 0 [ 0.971645] sd: No Scsi addr parsed to reserve index [ 0.971667] hisi_sas: driver version v1.6 [ 0.975035] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 0.975042] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 0.975768] scsi host0: tegra_ahci [ 0.976139] scsi host1: tegra_ahci [ 0.976269] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 0.976272] ata2: DUMMY [ 0.981228] libphy: Fixed MDIO Bus: probed [ 0.981694] tun: Universal TUN/TAP device driver, 1.6 [ 0.981697] tun: (C) 1999-2004 Max Krasnyansky [ 0.982293] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.982297] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.982332] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.982334] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.982365] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.982367] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.982397] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 0.982400] Copyright(c) 1999 - 2017 Intel Corporation. [ 0.991574] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 0.994348] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b de fc 9d [ 0.994444] libphy: dwc_phy: probed [ 0.994718] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 0.996533] PPP generic driver version 2.4.2 [ 0.996644] PPP BSD Compression module registered [ 0.996647] PPP Deflate Compression module registered [ 0.996659] PPP MPPE Compression module registered [ 0.996663] NET: Registered protocol family 24 [ 0.996700] usbcore: registered new interface driver r8152 [ 0.996730] usbcore: registered new interface driver asix [ 0.996757] usbcore: registered new interface driver ax88179_178a [ 0.996785] usbcore: registered new interface driver cdc_ether [ 0.996810] usbcore: registered new interface driver net1080 [ 0.996835] usbcore: registered new interface driver cdc_subset [ 0.996860] usbcore: registered new interface driver zaurus [ 0.996893] usbcore: registered new interface driver cdc_ncm [ 0.996997] VFIO - User Level meta-driver version: 0.3 [ 0.997781] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.997792] ehci-pci: EHCI PCI platform driver [ 0.997823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.997829] ohci-pci: OHCI PCI platform driver [ 0.997856] ohci-platform: OHCI generic platform driver [ 1.000038] usbcore: registered new interface driver uas [ 1.000079] usbcore: registered new interface driver usb-storage [ 1.000136] usbcore: registered new interface driver usbserial [ 1.001612] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.002730] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.003231] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.004287] mousedev: PS/2 mouse device common for all mice [ 1.004332] usbcore: registered new interface driver xpad [ 1.035592] nct1008_nct72 7-004c: initial LOC temp: 35000 [ 1.035897] nct1008_nct72 7-004c: initial EXT temp: 47500 [ 1.036499] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.036797] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.036982] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.132785] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.133807] Wake73 for irq=42 [ 1.135049] rtc rtc1: alarm rtc device [ 1.135059] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.135072] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.135242] i2c /dev entries driver [ 1.137112] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.141908] parse_throttle_dt_data: Num cap clks = 4 [ 1.141912] parse_throttle_dt_data: clk=mcpu type=1 [ 1.141915] parse_throttle_dt_data: clk=bcpu type=2 [ 1.141922] parse_throttle_dt_data: clk=gpu type=4 [ 1.141924] parse_throttle_dt_data: clk=emc type=3 [ 1.142905] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.143410] FAN: coudln't get the regulator [ 1.148427] device-mapper: uevent: version 1.0.3 [ 1.148735] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.148986] CPU EMC frequency mapping table: from device tree [ 1.157701] cpufreq: platform driver Initialization: pass [ 1.158255] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.158372] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.159133] sdhci: Secure Digital Host Controller Interface driver [ 1.159135] sdhci: Copyright(c) Pierre Ossman [ 1.159136] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.160401] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.162146] CMDQ: cmdq_platfm_init successful [ 1.163171] CQE: CMD_TIMING bit set for R1B DCMD [ 1.165219] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.170169] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.170221] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.171878] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.173571] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 1.177112] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.178015] tegra-se-nvhost 15810000.se: initialized [ 1.179082] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.179665] tegra-se-nvhost 15820000.se: initialized [ 1.180567] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.181146] tegra-se-nvhost 15830000.se: initialized [ 1.181917] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.182446] tegra-se-nvhost 15840000.se: initialized [ 1.183331] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.183576] hidraw: raw HID events driver (C) Jiri Kosina [ 1.184469] usbcore: registered new interface driver usbhid [ 1.184472] usbhid: USB HID core driver [ 1.186399] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 1.186428] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.193012] ina3221x: probe of 0-0042 failed with error -121 [ 1.193253] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 1.193280] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.199876] ina3221x: probe of 0-0043 failed with error -121 [ 1.202454] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.203460] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.204668] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.204894] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.205010] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.205201] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.208080] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.208180] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.208234] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.208285] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.208466] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.208838] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 1.208841] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.209417] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 1.211149] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.211453] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.211602] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.211770] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.211836] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.212142] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212145] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.212147] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.212196] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212199] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.212201] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.212274] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212277] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.212279] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.212324] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212326] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.212328] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.212374] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212377] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.212379] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.212432] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212437] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.212439] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.212493] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212497] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.212499] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.212544] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212549] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.212551] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.212596] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212601] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.212603] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.212646] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212650] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.212653] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.212702] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212707] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.212709] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.212755] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212760] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.212762] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.212808] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212814] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.212817] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.212862] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212867] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.212868] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.212916] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.212920] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.212922] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.212977] **** A57 ECC: Enabled [ 1.212980] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 1.213038] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.213468] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.213875] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.213988] denver_knobs_init:MTS_VERSION:47926945 [ 1.215800] nvpmodel: initialized successfully [ 1.216800] trusty-virtio trusty:virtio: initializing [ 1.216906] trusty_ipc virtio0: vring0: va(pa) ffffffc1e933a000(0) qsz 32 notifyid 1 [ 1.216912] trusty_ipc virtio0: vring1: va(pa) ffffffc1e9370000(0) qsz 32 notifyid 2 [ 1.219061] trusty-virtio trusty:virtio: initializing done [ 1.219145] trusty_ipc virtio0: is online [ 1.220003] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.220052] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.222064] usbcore: registered new interface driver snd-usb-audio [ 1.223047] tegra-i2c c240000.i2c: no acknowledge from address 0xa [ 1.223089] sgtl5000 1-000a: Error reading chip id -121 [ 1.228410] sgtl5000: probe of 1-000a failed with error -121 [ 1.235423] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.235728] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.251092] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.266501] mmc0: periodic cache flush enabled [ 1.266510] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.266797] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 1.266902] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 1.266997] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 1.267089] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 1.270173] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.276996] OPE platform probe [ 1.277059] OPE platform probe successful [ 1.282364] tegra-asoc: sound: Property 'srate' missing [ 1.287662] tegra-asoc:: probe of sound failed with error -22 [ 1.288016] u32 classifier [ 1.288018] Actions configured [ 1.288078] Initializing XFRM netlink socket [ 1.288663] NET: Registered protocol family 10 [ 1.289281] NET: Registered protocol family 17 [ 1.289291] NET: Registered protocol family 15 [ 1.289379] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.289418] Bluetooth: RFCOMM socket layer initialized [ 1.289426] Bluetooth: RFCOMM ver 1.11 [ 1.289430] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.289451] Bluetooth: HIDP socket layer initialized [ 1.289465] 9pnet: Installing 9P2000 support [ 1.289496] Key type dns_resolver registered [ 1.289711] Registered cp15_barrier emulation handler [ 1.289726] Registered setend emulation handler [ 1.290294] ata1: SATA link down (SStatus 0 SControl 300) [ 1.290661] registered taskstats version 1 [ 1.294538] isp 15600000.isp: initialized [ 1.297927] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.299026] nvcsi 150c0000.nvcsi: initialized [ 1.300729] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.304955] tegra-vi4 15700000.vi: initialized [ 1.305918] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ 1.305922] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 1.306264] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.315836] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.319194] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.327707] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.327784] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.327853] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.327969] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.329476] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.332755] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.364379] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 02:09:06 UTC (946692546) [ 1.365742] mmcblk mmc0:0001: Card claimed for testing. [ 1.394251] bpmp: mounted debugfs mirror [ 1.395494] bwmgr: missing cdev-type property [ 1.404291] spmic-ldo0: disabling [ 1.404459] spmic-ldo1: disabling [ 1.404607] en-vdd-sd: disabling [ 1.404609] vdd-usb0-5v: disabling [ 1.404611] vdd-usb1-5v: disabling [ 1.404613] vdd-3v3: disabling [ 1.404615] en-vdd-vcm-2v8: disabling [ 1.404617] vdd-sys-bl: disabling [ 1.404619] ALSA device list: [ 1.404622] #0: tegra-hda at 0x3518000 irq 383 [ 1.406851] Freeing unused kernel memory: 8576K [ 1.423970] Root device found: mmcblk0p1 [ 1.424761] Found dev node: /dev/mmcblk0p1 [ 1.466692] mmc1: Applying tuning correction [ 1.466706] mmc1: Tap value after applying correction 64 [ 1.466712] mmc1: hw tuning done ... [ 1.470495] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.485828] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 1.485832] EXT4-fs (mmcblk0p1): recovery complete [ 1.490155] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.490808] Rootfs mounted over mmcblk0p1 [ 1.509814] Switching from initrd to actual rootfs [ 1.606889] systemd[1]: System time before build time, advancing clock. [ 1.631344] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.640117] cgroup: cgroup2: unknown option "nsdelegate" [ 1.656769] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.657503] systemd[1]: Detected architecture arm64. [ 1.675295] systemd[1]: Set hostname to . [ 1.703468] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.761874] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.761882] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.867023] random: systemd: uninitialized urandom read (16 bytes read) [ 1.867050] systemd[1]: Reached target Swap. [ 1.867223] random: systemd: uninitialized urandom read (16 bytes read) [ 1.868529] systemd[1]: Created slice System Slice. [ 1.868593] random: systemd: uninitialized urandom read (16 bytes read) [ 1.868800] systemd[1]: Listening on Journal Socket. [ 1.870733] systemd[1]: Mounting POSIX Message Queue File System... [ 1.873440] systemd[1]: Mounting RPC Pipe File System... [ 1.896354] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 1.928209] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 1.930000] tegra-usb-cd usb_cd: otg phy is not available yet [ 1.931549] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 1.931555] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 1.934522] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 2.109406] systemd-journald[2205]: Received request to flush runtime journal from PID 1 [ 2.113013] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.115044] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.490760] tegra-usb-cd usb_cd: otg phy is not available yet [ 2.495197] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 2.521206] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.929495] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.934636] random: crng init done [ 2.938046] random: 7 urandom warning(s) missed due to ratelimiting [ 3.337506] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.339572] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.430746] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.435676] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 3.447147] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.452446] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 3.495194] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.533334] CPU1: shutdown [ 3.536337] psci: CPU1 killed. [ 3.541247] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.541534] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.576344] gpio tegra-gpio wake18 for gpio=101(M:5) [ 3.578676] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.603128] CPU2: shutdown [ 3.606137] psci: CPU2 killed. [ 3.833348] zram: Added device: zram0 [ 3.836462] zram: Added device: zram1 [ 3.839838] zram: Added device: zram2 [ 3.844099] zram: Added device: zram3 [ 3.868896] zram0: detected capacity change from 0 to 1030201344 [ 3.930125] Adding 1006052k swap on /dev/zram0. Priority:5 extents:1 across:1006052k SS [ 3.947070] zram1: detected capacity change from 0 to 1030201344 [ 3.973869] Adding 1006052k swap on /dev/zram1. Priority:5 extents:1 across:1006052k SS [ 3.986623] zram2: detected capacity change from 0 to 1030201344 [ 4.001156] Adding 1006052k swap on /dev/zram2. Priority:5 extents:1 across:1006052k SS [ 4.008855] zram3: detected capacity change from 0 to 1030201344 [ 4.035949] Adding 1006052k swap on /dev/zram3. Priority:5 extents:1 across:1006052k SS [ 4.274839] dhd_module_init in [ 4.274915] found wifi platform device bcmdhd_wlan [ 4.276778] wifi_platform_get_country_code_map: could not get country_code_map [ 4.276784] wifi_plat_dev_drv_probe:platform country code map is not available [ 4.276802] Power-up adapter 'DHD generic adapter' [ 4.276811] wifi_platform_set_power = 1 [ 4.483536] wifi_platform_bus_enumerate device present 1 [ 4.486592] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.491330] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.504274] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.510845] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.515275] wifi_platform_bus_enumerate device present 0 [ 4.515919] F1 signature read @0x18000000=0x17214354 [ 4.522465] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.528928] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.532402] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 4.533173] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 4.533265] wifi_platform_get_mac_addr [ 4.535516] ids dhd_log_netlink_init [ 4.535847] wl_create_event_handler(): thread:wl_event_handler:1663 started [ 4.535945] wl_event_handler : [ 4.535946] tsk Enter, tsk = 0xffffffc1cb401a90 [ 4.539714] dhd_attach(): thread:dhd_watchdog_thread:1664 started [ 4.541985] dhd_attach(): thread:dhd_dpc:166e started [ 4.542046] dhd_attach(): thread:dhd_rxf:166f started [ 4.542052] dhd_deferred_work_init: work queue initialized [ 4.542357] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 4.548316] Register interface [wlan0] MAC: 00:04:4b:de:fc:9b [ 4.548323] dhd_prot_ioctl : bus is down. we have nothing to do [ 4.548473] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 64 [ 4.549516] wifi_platform_set_power = 0 [ 4.730048] tegradc 15210000.nvdisplay: blank - powerdown [ 4.760121] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.766214] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 4.783562] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.788472] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 5.163062] tegradc 15210000.nvdisplay: blank - powerdown [ 5.535247] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.535651] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 5.535661] wl_android_wifi_on in [ 5.535666] wifi_platform_set_power = 1 [ 5.646061] fuse init (API version 7.26) [ 5.747412] vdd-1v8: voltage operation not allowed [ 5.752266] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.779633] vdd-1v8: voltage operation not allowed [ 5.784455] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.808437] vdd-1v8: voltage operation not allowed [ 5.813302] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.824432] vdd-1v8: voltage operation not allowed [ 5.829268] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.938842] vdd-1v8: voltage operation not allowed [ 5.943678] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.952407] vdd-1v8: voltage operation not allowed [ 5.957295] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.965655] vdd-1v8: voltage operation not allowed [ 5.970526] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 5.977175] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 64 [ 5.977692] F1 signature read @0x18000000=0x17214354 [ 5.983559] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 5.984217] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.052620] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 6.114598] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 6.114902] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 6.114979] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 6.114982] Enabling wake69 [ 6.116052] wifi_platform_get_mac_addr [ 6.118138] Firmware up: op_mode=0x0005, MAC=00:04:4b:de:fc:9b [ 6.123477] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 6.123517] Skipping the clm download. len:0 memblk: (null) [ 6.125898] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 6.130691] Firmware version = wl0: May 17 2019 16:59:40 version 7.35.349.79 (r714996 CY) FWID 01-e527e2ad [ 6.133101] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 6.225751] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 6.225755] P2P interface registered [ 6.239141] WLC_E_IF: NO_IF set, event Ignored [ 6.247656] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.359185] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 6.360364] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready