=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.03.21 16:14:27 =~=~=~=~=~=~=~=~=~=~=~= ÿâ [0021.222] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0021.228] I> t234-A01-0-Silicon (0x12347) Prod [0021.232] I> Boot-mode : BPMP Diagnostic [0021.236] I> Emulation: [0021.238] I> Entry timestamp: 0x00000000 [0021.242] I> last_boot_error: 0x0 [0021.245] I> BR-BCT: preprod_dev_sign: 0 [0021.249] I> rst_source: 0x0, rst_level: 0x0 [0021.253] I> Task: Initialize MB2 params (0x5000d78d) [0021.258] I> MB2-params @ 0x40060000 [0021.262] I> Task: Crypto init (0x5001cb8d) [0021.266] I> Task: Secure debug controls (0x5000cd21) [0021.271] I> Task: strap war set (0x5000c70d) [0021.275] I> strap value(0x4000001) set to 0x4000001 [0021.280] I> Task: Program NV master stream id (0x5000ccd5) [0021.285] I> Task: Verify boot mode (0xd482021) [0021.291] I> Task: Alias fuses (0x500109cd) [0021.296] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0021.303] I> Task: Print SKU type (0x5000fee1) [0021.307] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0021.312] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0021.316] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0021.321] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0021.325] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0021.329] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0021.333] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0021.337] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0021.342] I> FUSE_SKU_INFO_0 = 0xd0 [0021.345] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0021.349] I> FUSE_PACKAGE_INFO_0 = 0x2 [0021.353] I> SKU: Prod [0021.355] I> Task: Boost clocks (0x5001462d) [0021.359] I> Initializing PLLC2 for AXI_CBB. [0021.363] I> AXI_CBB : src = 35, divisor = 0 [0021.367] I> Task: Voltage monitor (0x50014639) [0021.372] I> VMON: Vmon re-calibration and fine tuning done [0021.377] I> Task: UPHY init (0x5000dced) [0021.381] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0021.387] I> Task: Boot device init (0x50000b39) [0021.391] I> Boot_device: RCM [0021.394] I> USB configuration success [0021.669] I> Task: TSC init (0x5001fa6d) [0021.673] I> Task: Enable WDT 5th expiry (0x50020699) [0021.678] I> Task: I2C register (0x50000ad9) [0021.682] I> Task: Reset FSI (0x50014635) [0021.686] I> Task: Enable clock-mon (0x5001fa5d) [0021.701] I> FMON: Fmon re-programming done [0021.705] I> Task: MB1 fixed firewalls (0x5001f0d9) [0021.714] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0021.719] I> Loading MB2 Applet [0021.722] I> Active chain: 0 [0021.725] I> Slot: 0 [0021.727] I> Binary[21] block-0 (partition size: 0x50000) [0021.732] I> get_binary_info: Binary name: MB2-Applet [0021.737] I> Size of crypto header is 8192 [0021.741] I> BCH load address is : 0x4004e000 [0021.745] I> Size of crypto header is 8192 [0021.925] I> BCH of MB2-Applet read from storage [0021.930] I> BCH address is : 0x4004e000 [0021.934] I> MB2-Applet header integrity check is success [0021.939] I> Binary magic in BCH component 0 is MB2A [0021.944] I> component binary type is 21 [0021.947] I> Size of crypto header is 8192 [0021.958] I> MB2-Applet binary is read from storage [0021.963] I> MB2-Applet binary integrity check is success [0021.968] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0021.975] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0021.980] I> Task: Prepare MB2 params (0x5000d8f1) [0021.985] I> BR-BCT Boot Chain Fields [0021.989] I> u32_non_gpio_select_boot_chain : 0 [0021.993] I> u32_num_boot_chains : 0 [0021.998] I> bf_bl_gpio_select_boot_chain_1b : 0 [0022.003] I> Task: Misc NV security settings (0x5000d0f9) [0022.008] I> NVDEC sticky bits programming done [0022.013] I> Successfully powergated NVDEC [0022.016] I> Task: Disable/Reload WDT (0x500206e1) [0022.021] I> Programmed SLCG global override := 0x0 [0022.026] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully I> sdmmc DDR50 mode I> sdmmc bdev is already initialized E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> Rebooting : reboot-recovery ÿâ [0003.611] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0003.617] I> t234-A01-0-Silicon (0x12347) Prod [0003.621] I> Boot-mode : BPMP Diagnostic [0003.625] I> Emulation: [0003.627] I> Entry timestamp: 0x00000000 [0003.631] I> last_boot_error: 0x0 [0003.634] I> BR-BCT: preprod_dev_sign: 0 [0003.638] I> rst_source: 0xb, rst_level: 0x1 [0003.642] I> Task: Initialize MB2 params (0x5000d78d) [0003.647] I> MB2-params @ 0x40060000 [0003.651] I> Task: Crypto init (0x5001cb8d) [0003.655] I> Task: Secure debug controls (0x5000cd21) [0003.660] I> Task: strap war set (0x5000c70d) [0003.664] I> strap value(0x4000001) set to 0x4000001 [0003.669] I> Task: Program NV master stream id (0x5000ccd5) [0003.674] I> Task: Verify boot mode (0xd482021) [0003.680] I> Task: Alias fuses (0x500109cd) [0003.685] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0003.692] I> Task: Print SKU type (0x5000fee1) [0003.696] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0003.702] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0003.706] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0003.710] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0003.714] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0003.719] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0003.723] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0003.727] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0003.731] I> FUSE_SKU_INFO_0 = 0xd0 [0003.734] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0003.738] I> FUSE_PACKAGE_INFO_0 = 0x2 [0003.742] I> SKU: Prod [0003.744] I> Task: Boost clocks (0x5001462d) [0003.748] I> Initializing PLLC2 for AXI_CBB. [0003.753] I> AXI_CBB : src = 35, divisor = 0 [0003.757] I> Task: Voltage monitor (0x50014639) [0003.761] I> VMON: Vmon re-calibration and fine tuning done [0003.766] I> Task: UPHY init (0x5000dced) [0003.771] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0003.777] I> Task: Boot device init (0x50000b39) [0003.781] I> Boot_device: RCM [0003.784] I> USB configuration success [0004.048] I> Task: TSC init (0x5001fa6d) [0004.052] I> Task: Enable WDT 5th expiry (0x50020699) [0004.057] I> Task: I2C register (0x50000ad9) [0004.061] I> Task: Reset FSI (0x50014635) [0004.065] I> Task: Enable clock-mon (0x5001fa5d) [0004.081] I> FMON: Fmon re-programming done [0004.085] I> Task: MB1 fixed firewalls (0x5001f0d9) [0004.094] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0004.098] I> Loading MB2 Applet [0004.101] I> Active chain: 0 [0004.104] I> Slot: 0 [0004.106] I> Binary[21] block-0 (partition size: 0x50000) [0004.111] I> get_binary_info: Binary name: MB2-Applet [0004.116] I> Size of crypto header is 8192 [0004.120] I> BCH load address is : 0x4004e000 [0004.125] I> Size of crypto header is 8192 [0004.489] I> BCH of MB2-Applet read from storage [0004.494] I> BCH address is : 0x4004e000 [0004.498] I> MB2-Applet header integrity check is success [0004.503] I> Binary magic in BCH component 0 is MB2A [0004.508] I> component binary type is 21 [0004.511] I> Size of crypto header is 8192 [0004.523] I> MB2-Applet binary is read from storage [0004.528] I> MB2-Applet binary integrity check is success [0004.533] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0004.540] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0004.546] I> Task: Prepare MB2 params (0x5000d8f1) [0004.551] I> BR-BCT Boot Chain Fields [0004.554] I> u32_non_gpio_select_boot_chain : 0 [0004.559] I> u32_num_boot_chains : 0 [0004.563] I> bf_bl_gpio_select_boot_chain_1b : 0 [0004.568] I> Task: Misc NV security settings (0x5000d0f9) [0004.573] I> NVDEC sticky bits programming done [0004.578] I> Successfully powergated NVDEC [0004.582] I> Task: Disable/Reload WDT (0x500206e1) [0004.586] I> Programmed SLCG global override := 0x0 [0004.591] I> MB1: MSS reconfig completed I> Applet (version: 0.0.0.0-t234-54845784-80607037) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully I> sdmmc DDR50 mode I> sdmmc bdev is already initialized E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery ÿâ [0076.491] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0076.497] I> t234-A01-0-Silicon (0x12347) Prod [0076.501] I> Boot-mode : Coldboot [0076.504] I> Emulation: [0076.506] I> Entry timestamp: 0x00000000 [0076.510] I> last_boot_error: 0x0 [0076.513] I> BR-BCT: preprod_dev_sign: 0 [0076.517] I> rst_source: 0xb, rst_level: 0x1 [0076.521] I> Task: Bootchain select WAR set (0x5000c741) [0076.526] I> Active chain: 0 [0076.529] I> Task: CRC check (0x5001dab5) [0076.533] I> Skip CRC check as records_integrity fuse is not burned [0076.539] I> Task: Initialize MB2 params (0x5000d78d) [0076.544] I> MB2-params @ 0x40060000 [0076.548] I> Task: Crypto init (0x5001cb8d) [0076.552] I> Task: Secure debug controls (0x5000cd21) [0076.557] I> Task: strap war set (0x5000c70d) [0076.561] I> strap value(0x4000001) set to 0x4000001 [0076.566] I> Task: Initialize SOC Therm (0x5001af85) [0076.571] I> Task: Program NV master stream id (0x5000ccd5) [0076.576] I> Task: Verify boot mode (0xd482021) [0076.582] I> Task: Alias fuses (0x500109cd) [0076.587] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0076.594] I> Task: Print SKU type (0x5000fee1) [0076.598] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0076.603] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0076.608] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0076.612] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0076.616] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0076.621] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0076.625] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0076.629] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0076.633] I> FUSE_SKU_INFO_0 = 0xd0 [0076.636] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0076.640] I> FUSE_PACKAGE_INFO_0 = 0x2 [0076.644] I> SKU: Prod [0076.646] I> Task: Boost clocks (0x5001462d) [0076.650] I> Initializing PLLC2 for AXI_CBB. [0076.655] I> AXI_CBB : src = 35, divisor = 0 [0076.659] I> Task: Voltage monitor (0x50014639) [0076.663] I> VMON: Vmon re-calibration and fine tuning done [0076.668] I> Task: UPHY init (0x5000dced) [0076.673] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0076.679] I> Task: Boot device init (0x50000b39) [0076.683] I> Boot_device: RCM [0076.686] I> USB configuration success [0077.647] I> Task: TSC init (0x5001fa6d) [0077.651] I> Task: Load membct (0x50011fb9) [0077.655] I> RAM_CODE 0x4000001 [0077.658] I> Loading MEMBCT [0077.661] I> Active chain: 0 [0077.664] I> Slot: 0 [0077.666] I> Binary[0] block-0 (partition size: 0x40000) [0077.671] I> get_binary_info: Binary name: MEM-BCT-0 [0077.676] I> Size of crypto header is 8192 [0077.680] I> BCH load address is : 0x40050000 [0077.684] I> Size of crypto header is 8192 [0078.088] I> BCH of MEM-BCT-0 read from storage [0078.092] I> BCH address is : 0x40050000 [0078.096] I> MEM-BCT-0 header integrity check is success [0078.101] I> Binary magic in BCH component 0 is MEM0 [0078.106] I> component binary type is 0 [0078.111] I> MEM-BCT-0 binary is read from storage [0078.116] I> MEM-BCT-0 binary integrity check is success [0078.121] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0078.128] I> RAM_CODE 0x4000001 [0078.133] I> RAM_CODE 0x4000001 [0078.137] I> Task: Load Page retirement list (0x50011601) [0078.142] I> Task: SDRAM params override (0x50011f95) [0078.147] I> Task: Save mem-bct info (0x500147fd) [0078.152] I> Task: Carveout allocate (0x50014861) [0078.157] I> ECC region[0]: Start:0x0, End:0x0 [0078.161] I> ECC region[1]: Start:0x0, End:0x0 [0078.165] I> ECC region[2]: Start:0x0, End:0x0 [0078.169] I> ECC region[3]: Start:0x0, End:0x0 [0078.174] I> ECC region[4]: Start:0x0, End:0x0 [0078.178] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0078.184] I> Non-ECC region[1]: Start:0x0, End:0x0 [0078.188] I> Non-ECC region[2]: Start:0x0, End:0x0 [0078.193] I> Non-ECC region[3]: Start:0x0, End:0x0 [0078.198] I> Non-ECC region[4]: Start:0x0, End:0x0 [0078.207] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0078.215] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0078.222] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0078.229] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0078.236] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0078.243] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0078.250] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0078.257] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0078.264] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0078.271] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0078.278] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0078.285] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0078.292] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0078.299] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0078.306] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0078.313] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0078.320] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0078.327] I> allocated(CO:01) base:0x832100000 size:0x100000 align: 0x100000 [0078.333] I> allocated(CO:04) base:0x832000000 size:0x100000 align: 0x100000 [0078.340] I> allocated(CO:05) base:0x82f700000 size:0x100000 align: 0x100000 [0078.347] I> allocated(CO:08) base:0x82f600000 size:0x100000 align: 0x100000 [0078.354] I> allocated(CO:09) base:0x82f500000 size:0x100000 align: 0x100000 [0078.361] I> allocated(CO:15) base:0x82f400000 size:0x100000 align: 0x100000 [0078.368] I> allocated(CO:17) base:0x82f300000 size:0x100000 align: 0x100000 [0078.375] I> allocated(CO:23) base:0x82f200000 size:0x100000 align: 0x100000 [0078.382] I> allocated(CO:27) base:0x82f100000 size:0x100000 align: 0x100000 [0078.389] I> allocated(CO:42) base:0x82f000000 size:0x100000 align: 0x100000 [0078.396] I> allocated(CO:54) base:0x82ef80000 size:0x80000 align: 0x80000 [0078.403] I> allocated(CO:34) base:0x82ef70000 size:0x10000 align: 0x10000 [0078.409] I> allocated(CO:46) base:0x800000000 size:0x20000000 align: 0x20000000 [0078.417] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0078.424] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0078.430] I> allocated(CO:48) base:0x82ef50000 size:0x20000 align: 0x10000 [0078.437] I> allocated(CO:69) base:0x82ef30000 size:0x20000 align: 0x10000 [0078.444] I> allocated(CO:49) base:0x82ef20000 size:0x10000 align: 0x10000 [0078.451] I> allocated(CO:50) base:0x82ef10000 size:0x10000 align: 0x10000 [0078.457] I> allocated(CO:52) base:0x82ef00000 size:0x10000 align: 0x10000 [0078.464] I> NSDRAM base: 0x80000000, end: 0x82ef70000 [0078.469] I> Task: Thermal check (0x500208f9) [0078.473] I> max_chip_limit = 105 [0078.476] I> min_chip_limit = -28 [0078.480] I> max temp read = 24 [0078.483] I> min temp read = 24 [0078.486] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0078.492] I> Task: Enable WDT 5th expiry (0x50020699) [0078.497] I> Task: I2C register (0x50000ad9) [0078.501] I> Task: Reset FSI (0x50014635) [0078.505] I> Task: Pinmux init (0x500137bd) [0078.509] I> Task: Prod config init (0x50013c09) [0078.514] I> Task: Pad voltage init (0x50013859) [0078.518] I> Task: Prod init (0x50013c4d) [0078.522] I> Task: Common rail init (0x50014305) [0078.527] W> PMIC_CONFIG: Rail: Thermal config not found in MB1 BCT. [0078.533] I> DONE: Thermal config [0078.537] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0078.545] I> DONE: SOC rail config [0078.549] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0078.555] I> DONE: MEMIO rail config [0078.559] I> DONE: GPU rail info [0078.562] I> DONE: CV rail info [0078.565] I> Task: Mem clock src (0x50011de5) [0078.569] I> Task: Misc. board config (0x500143ad) [0078.574] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0078.580] I> Task: SDRAM init (0x50011de9) [0078.587] I> SDRAM-params @ 0xd485000 [0078.590] I> MSS code-drop: NvBootSdramInit [0078.594] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0078.602] I> MSS CAR: Init PLLM [0078.605] I> MSS CAR: Init PLLHUB [0078.610] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0078.621] I> mb1_sdram_init Done ! [0078.624] I> SDRAM Size in Total 0x800000000 [0078.628] I> Task: Dram Ecc scrub (0x50011729) [0078.633] I> Task: DRAM alias check (0x50011f8d) [0078.664] I> Task: Program NSDRAM carveout (0x50015171) [0078.671] I> NSDRAM carveout encryption is enabled [0078.676] I> Program NSDRAM carveout [0078.681] I> Task: Register checker (0x50011f91) [0078.689] I> Task: Enable clock-mon (0x5001fa5d) [0078.706] I> FMON: Fmon re-programming done [0078.711] I> Task: Mapper init (0x5001dfed) [0078.716] I> Task: SC7 Context Init (0x5001fd5d) [0078.722] I> Task: CCPLEX IST init (0x5000d561) [0078.729] I> Task: CPU WP0 (0x5000c7a9) [0078.734] I> Loading MCE [0078.737] I> Active chain: 0 [0078.740] I> Slot: 0 [0078.743] I> Binary[8] block-0 (partition size: 0x80000) [0078.749] I> get_binary_info: Binary name: MCE [0078.754] I> Size of crypto header is 8192 [0078.759] I> BCH load address is : 0x4003e000 [0078.764] I> Size of crypto header is 8192 [0079.290] I> BCH of MCE read from storage [0079.295] I> BCH address is : 0x4003e000 [0079.300] I> MCE header integrity check is success [0079.305] I> Binary magic in BCH component 0 is MTSM [0079.311] I> component binary type is 8 [0079.315] I> Size of crypto header is 8192 [0079.328] I> MCE binary is read from storage [0079.334] I> MCE binary integrity check is success [0079.339] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0079.347] I> Size of crypto header is 8192 [0079.353] I> Sending WP0 mailbox command to PSC [0079.363] I> Task: XUSB Powergate (0x50000ae5) [0079.369] I> Skipping powergate XUSB. [0079.373] I> Task: MB1 fixed firewalls (0x5001f0d9) [0079.393] I> Task: Load bpmp-fw (0x5001f41d) [0079.399] I> Active chain: 0 [0079.402] I> Slot: 0 [0079.405] I> Binary[15] block-0 (partition size: 0x180000) [0079.411] I> get_binary_info: Binary name: BPMP_FW [0079.417] I> Size of crypto header is 8192 [0079.422] I> BCH load address is : 0x807fe000 [0079.427] I> Size of crypto header is 8192 [0079.432] I> BCH of BPMP_FW read from storage [0079.437] I> BCH address is : 0x807fe000 [0079.443] I> BPMP_FW header integrity check is success [0079.448] I> Binary magic in BCH component 0 is BPMF [0079.454] I> component binary type is 15 [0079.458] I> Size of crypto header is 8192 [0079.511] I> BPMP_FW binary is read from storage [0079.518] I> BPMP_FW binary integrity check is success [0079.524] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0079.532] I> Active chain: 0 [0079.535] I> Slot: 0 [0079.538] I> Binary[16] block-251658752 (partition size: 0x400000) [0079.546] I> get_binary_info: Binary name: BPMP_FW_DTB [0079.552] I> Size of crypto header is 8192 [0079.556] I> BCH load address is : 0x807fc000 [0079.562] I> Size of crypto header is 8192 [0079.567] I> BCH of BPMP_FW_DTB read from storage [0079.572] I> BCH address is : 0x807fc000 [0079.578] I> BPMP_FW_DTB header integrity check is success [0079.584] I> Binary magic in BCH component 0 is BPMD [0079.589] I> component binary type is 16 [0079.594] I> Size of crypto header is 8192 [0079.605] I> BPMP_FW_DTB binary is read from storage [0079.611] I> BPMP_FW_DTB binary integrity check is success [0079.617] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbb70 (0x20480) [0079.626] I> Task: Load psc-fw (0x5001f5a5) [0079.632] I> Active chain: 0 [0079.635] I> Slot: 0 [0079.638] I> Binary[17] block-0 (partition size: 0xc0000) [0079.644] I> get_binary_info: Binary name: PSC_FW [0079.649] I> Size of crypto header is 8192 [0079.654] I> BCH load address is : 0x80ffe000 [0079.660] I> Size of crypto header is 8192 [0079.665] I> BCH of PSC_FW read from storage [0079.669] I> BCH address is : 0x80ffe000 [0079.675] I> PSC_FW header integrity check is success [0079.681] I> Binary magic in BCH component 0 is PFWP [0079.686] I> component binary type is 17 [0079.690] I> Size of crypto header is 8192 [0079.712] I> PSC_FW binary is read from storage [0079.718] I> PSC_FW binary integrity check is success [0079.724] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0079.732] I> Task: Load nvdec-fw (0x5001f619) [0079.738] I> Active chain: 0 [0079.741] I> Slot: 0 [0079.744] I> Binary[7] block-0 (partition size: 0x100000) [0079.750] I> get_binary_info: Binary name: NVDEC [0079.755] I> Size of crypto header is 8192 [0079.760] I> BCH load address is : 0x800fe000 [0079.766] I> Size of crypto header is 8192 [0079.771] I> BCH of NVDEC read from storage [0079.776] I> BCH address is : 0x800fe000 [0079.781] I> NVDEC header integrity check is success [0079.787] I> Binary magic in BCH component 0 is NDEC [0079.792] I> component binary type is 7 [0079.797] I> Size of crypto header is 8192 [0079.814] I> NVDEC binary is read from storage [0079.820] I> NVDEC binary integrity check is success [0079.826] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0079.837] I> Task: Load tsec-fw (0x5001f9a5) [0079.842] I> TSEC-FW load support not enabled [0079.847] I> Task: GPIO interrupt map (0x50014541) [0079.853] I> Task: SC7 context save (0x5001fe9d) [0079.859] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0079.866] I> Loading MB2 [0079.869] I> Active chain: 0 [0079.872] I> Slot: 0 [0079.875] I> Binary[6] block-0 (partition size: 0x80000) [0079.881] I> get_binary_info: Binary name: MB2 [0079.886] I> Size of crypto header is 8192 [0079.891] I> BCH load address is : 0x8007e000 [0079.896] I> Size of crypto header is 8192 [0079.901] I> BCH of MB2 read from storage [0079.906] I> BCH address is : 0x8007e000 [0079.911] I> MB2 header integrity check is success [0079.917] I> Binary magic in BCH component 0 is MB2B [0079.922] I> component binary type is 6 [0079.926] I> Size of crypto header is 8192 [0079.951] I> MB2 binary is read from storage [0079.957] I> MB2 binary integrity check is success [0079.962] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0079.970] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0079.978] I> Task: Prepare MB2 params (0x5000d8f1) [0079.986] I> BR-BCT Boot Chain Fields [0079.990] I> u32_non_gpio_select_boot_chain : 0 [0079.995] I> u32_num_boot_chains : 2 [0080.000] I> bf_bl_gpio_select_boot_chain_1b : 0 [0080.006] I> Task: Program misc carveouts (0x50014bcd) [0080.013] I> Program IPC carveouts [0080.021] I> Task: Dram ecc test (0x500117a5) [0080.026] I> Task: Misc NV security settings (0x5000d0f9) [0080.033] I> NVDEC sticky bits programming done [0080.038] I> Successfully powergated NVDEC [0080.043] I> Task: Disable/Reload WDT (0x500206e1) [0080.049] I> Programmed SLCG global override := 0x0 [0080.054] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM Flash I> Emulation: I> Entry timestamp: 0x04c61231 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x830000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: PSC mailbox init (0x50015c10) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Enter 3p server (0x50001f18) I> USB configuration success I> Populate storage info I> Erasing device 3: 0 I> QSPI: Erasing entire device I> Writing device 3: 0. I> Found 57 partitions in QSPI_FLASH (instance 0) I> Erasing device 1: 3 I> Writing device 1: 3. I> Writing device 1: 3. I> Found 14 partitions in SDMMC_USER (instance 3) I> Writing device 1: 3. I> Found 14 partitions in SDMMC_USER (instance 3) I> Writing A_mb1 partition. I> Writing A_psc_bl1 partition. I> Writing A_nvdec partition. I> Writing A_mb2 partition. I> Writing A_xusb-fw partition. I> Writing A_bpmp-fw partition. I> Writing A_bpmp-fw-dtb partition. I> Writing A_psc-fw partition. I> Writing A_mts-mce partition. I> Writing A_sc7 partition. I> Writing A_pscrf partition. I> Writing A_mb2rf partition. I> Writing A_cpu-bootloader partition. I> Writing A_secure-os partition. I> Writing A_eks partition. I> Writing A_dce-fw partition. I> Writing A_spe-fw partition. I> Writing A_rce-fw partition. I> Writing A_adsp-fw partition. I> Writing B_mb1 partition. I> Writing B_psc_bl1 partition. I> Writing B_nvdec partition. I> Writing B_mb2 partition. I> Writing B_xusb-fw partition. I> Writing B_bpmp-fw partition. I> Writing B_bpmp-fw-dtb partition. I> Writing B_psc-fw partition. I> Writing B_mts-mce partition. I> Writing B_sc7 partition. I> Writing B_pscrf partition. I> Writing B_mb2rf partition. I> Writing B_cpu-bootloader partition. I> Writing B_secure-os partition. I> Writing B_eks partition. I> Writing B_dce-fw partition. I> Writing B_spe-fw partition. I> Writing B_rce-fw partition. I> Writing B_adsp-fw partition. I> Writing B_VER partition. I> Writing A_VER partition. I> Writing device 1: 3. I> Writing A_kernel partition. I> Writing A_kernel-dtb partition. I> Writing B_kernel partition. I> Writing B_kernel-dtb partition. I> Writing recovery partition. I> Writing recovery-dtb partition. I> Writing esp partition. I> Writing APP partition. I> Writing secondary_gpt_backup partition. I> Writing BCT partition. I> Writing BCT-boot-chain_backup partition. I> Writing A_MB1_BCT partition. I> Writing B_MB1_BCT partition. I> Writing A_MEM_BCT partition. I> Writing B_MEM_BCT partition. I> Rebooting : reset-coldboot ÿâ [0000.062] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0000.067] I> t234-A01-0-Silicon (0x12347) Prod [0000.072] I> Boot-mode : Coldboot [0000.075] I> Emulation: [0000.077] I> Entry timestamp: 0x00000000 [0000.081] I> last_boot_error: 0x0 [0000.084] I> BR-BCT: preprod_dev_sign: 0 [0000.088] I> rst_source: 0xb, rst_level: 0x1 [0000.092] I> Task: Bootchain select WAR set (0x5000c741) [0000.097] I> Active chain: 0 [0000.100] I> Task: CRC check (0x5001dab5) [0000.104] I> Skip CRC check as records_integrity fuse is not burned [0000.110] I> Task: Initialize MB2 params (0x5000d78d) [0000.115] I> MB2-params @ 0x40060000 [0000.119] I> Task: Crypto init (0x5001cb8d) [0000.123] I> Task: Secure debug controls (0x5000cd21) [0000.128] I> Task: strap war set (0x5000c70d) [0000.132] I> strap value(0x4000001) set to 0x4000001 [0000.137] I> Task: Initialize SOC Therm (0x5001af85) [0000.141] I> Task: Program NV master stream id (0x5000ccd5) [0000.147] I> Task: Verify boot mode (0xd482021) [0000.153] I> Task: Alias fuses (0x500109cd) [0000.157] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.164] I> Task: Print SKU type (0x5000fee1) [0000.168] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.174] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.178] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.182] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.186] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.191] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.195] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.199] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.203] I> FUSE_SKU_INFO_0 = 0xd0 [0000.206] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.211] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.214] I> SKU: Prod [0000.216] I> Task: Boost clocks (0x5001462d) [0000.220] I> Initializing PLLC2 for AXI_CBB. [0000.225] I> AXI_CBB : src = 35, divisor = 0 [0000.229] I> Task: Voltage monitor (0x50014639) [0000.233] I> VMON: Vmon re-calibration and fine tuning done [0000.239] I> Task: UPHY init (0x5000dced) [0000.243] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.249] I> Task: Boot device init (0x50000b39) [0000.253] I> Boot_device: QSPI_FLASH instance: 0 [0000.258] I> Qspi clock source : pllc_out0 [0000.262] I> QSPI Flash: Macronix 64MB [0000.266] I> QSPI-0l initialized successfully [0000.270] I> Task: TSC init (0x5001fa6d) [0000.274] I> Task: Load membct (0x50011fb9) [0000.278] I> RAM_CODE 0x4000001 [0000.281] I> Loading MEMBCT [0000.284] I> Active chain: 0 [0000.286] I> Slot: 0 [0000.288] I> Binary[0] block-0 (partition size: 0x40000) [0000.293] I> get_binary_info: Binary name: MEM-BCT-0 [0000.298] I> Size of crypto header is 8192 [0000.302] I> BCH load address is : 0x40050000 [0000.306] I> Size of crypto header is 8192 [0000.311] I> BCH of MEM-BCT-0 read from storage [0000.315] I> BCH address is : 0x40050000 [0000.319] I> MEM-BCT-0 header integrity check is success [0000.324] I> Binary magic in BCH component 0 is MEM0 [0000.329] I> component binary type is 0 [0000.333] I> MEM-BCT-0 binary is read from storage [0000.338] I> MEM-BCT-0 binary integrity check is success [0000.343] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.350] I> RAM_CODE 0x4000001 [0000.355] I> RAM_CODE 0x4000001 [0000.359] I> Task: Load Page retirement list (0x50011601) [0000.364] I> Task: SDRAM params override (0x50011f95) [0000.369] I> Task: Save mem-bct info (0x500147fd) [0000.374] I> Task: Carveout allocate (0x50014861) [0000.378] I> RCM blob carveout will not be allocated [0000.383] I> ECC region[0]: Start:0x0, End:0x0 [0000.387] I> ECC region[1]: Start:0x0, End:0x0 [0000.391] I> ECC region[2]: Start:0x0, End:0x0 [0000.396] I> ECC region[3]: Start:0x0, End:0x0 [0000.400] I> ECC region[4]: Start:0x0, End:0x0 [0000.404] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.410] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.415] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.419] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.424] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.434] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.441] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.448] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0000.455] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0000.462] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.469] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.476] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.483] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.491] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0000.498] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0000.504] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.511] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0000.518] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0000.525] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0000.532] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0000.539] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0000.546] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0000.553] I> allocated(CO:01) base:0x832100000 size:0x100000 align: 0x100000 [0000.560] I> allocated(CO:04) base:0x832000000 size:0x100000 align: 0x100000 [0000.567] I> allocated(CO:05) base:0x82f700000 size:0x100000 align: 0x100000 [0000.574] I> allocated(CO:08) base:0x82f600000 size:0x100000 align: 0x100000 [0000.581] I> allocated(CO:09) base:0x82f500000 size:0x100000 align: 0x100000 [0000.587] I> allocated(CO:15) base:0x82f400000 size:0x100000 align: 0x100000 [0000.594] I> allocated(CO:17) base:0x82f300000 size:0x100000 align: 0x100000 [0000.601] I> allocated(CO:23) base:0x82f200000 size:0x100000 align: 0x100000 [0000.608] I> allocated(CO:27) base:0x82f100000 size:0x100000 align: 0x100000 [0000.615] I> allocated(CO:42) base:0x82f000000 size:0x100000 align: 0x100000 [0000.622] I> allocated(CO:54) base:0x82ef80000 size:0x80000 align: 0x80000 [0000.629] I> allocated(CO:34) base:0x82ef70000 size:0x10000 align: 0x10000 [0000.636] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0000.642] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0000.649] I> allocated(CO:48) base:0x82ef50000 size:0x20000 align: 0x10000 [0000.656] I> allocated(CO:69) base:0x82ef30000 size:0x20000 align: 0x10000 [0000.663] I> allocated(CO:49) base:0x82ef20000 size:0x10000 align: 0x10000 [0000.670] I> allocated(CO:50) base:0x82ef10000 size:0x10000 align: 0x10000 [0000.676] I> allocated(CO:52) base:0x82ef00000 size:0x10000 align: 0x10000 [0000.683] I> NSDRAM base: 0x80000000, end: 0x82ef70000 [0000.688] I> Task: Thermal check (0x500208f9) [0000.692] I> max_chip_limit = 105 [0000.695] I> min_chip_limit = -28 [0000.699] I> max temp read = 32 [0000.701] I> min temp read = 31 [0000.704] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0000.711] I> Task: Enable WDT 5th expiry (0x50020699) [0000.716] I> Task: I2C register (0x50000ad9) [0000.720] I> Task: Reset FSI (0x50014635) [0000.724] I> Task: Pinmux init (0x500137bd) [0000.728] I> Task: Prod config init (0x50013c09) [0000.733] I> Task: Pad voltage init (0x50013859) [0000.737] I> Task: Prod init (0x50013c4d) [0000.741] I> Task: Common rail init (0x50014305) [0000.746] W> PMIC_CONFIG: Rail: Thermal config not found in MB1 BCT. [0000.752] I> DONE: Thermal config [0000.756] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.764] I> DONE: SOC rail config [0000.768] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.774] I> DONE: MEMIO rail config [0000.778] I> DONE: GPU rail info [0000.781] I> DONE: CV rail info [0000.784] I> Task: Mem clock src (0x50011de5) [0000.788] I> Task: Misc. board config (0x500143ad) [0000.793] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.799] I> Task: SDRAM init (0x50011de9) [0000.806] I> SDRAM-params @ 0xd485000 [0000.809] I> MSS code-drop: NvBootSdramInit [0000.813] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.820] I> MSS CAR: Init PLLM [0000.824] I> MSS CAR: Init PLLHUB [0000.828] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.840] I> mb1_sdram_init Done ! [0000.843] I> SDRAM Size in Total 0x800000000 [0000.847] I> Task: Dram Ecc scrub (0x50011729) [0000.852] I> Task: DRAM alias check (0x50011f8d) [0000.883] I> Task: Program NSDRAM carveout (0x50015171) [0000.890] I> NSDRAM carveout encryption is enabled [0000.895] I> Program NSDRAM carveout [0000.899] I> Task: Register checker (0x50011f91) [0000.907] I> Task: Enable clock-mon (0x5001fa5d) [0000.924] I> FMON: Fmon re-programming done [0000.929] I> Task: Mapper init (0x5001dfed) [0000.934] I> Task: SC7 Context Init (0x5001fd5d) [0000.940] I> Task: CCPLEX IST init (0x5000d561) [0000.946] I> Task: CPU WP0 (0x5000c7a9) [0000.951] I> Loading MCE [0000.954] I> Active chain: 0 [0000.957] I> Slot: 0 [0000.959] I> Binary[8] block-0 (partition size: 0x80000) [0000.965] I> get_binary_info: Binary name: MCE [0000.970] I> Size of crypto header is 8192 [0000.975] I> BCH load address is : 0x4003e000 [0000.980] I> Size of crypto header is 8192 [0000.985] I> BCH of MCE read from storage [0000.989] I> BCH address is : 0x4003e000 [0000.995] I> MCE header integrity check is success [0001.000] I> Binary magic in BCH component 0 is MTSM [0001.005] I> component binary type is 8 [0001.009] I> Size of crypto header is 8192 [0001.016] I> MCE binary is read from storage [0001.021] I> MCE binary integrity check is success [0001.026] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.034] I> Size of crypto header is 8192 [0001.049] I> Size of crypto header is 8192 [0001.054] I> Sending WP0 mailbox command to PSC [0001.064] I> Task: XUSB Powergate (0x50000ae5) [0001.070] I> Skipping powergate XUSB. [0001.074] I> Task: MB1 fixed firewalls (0x5001f0d9) [0001.094] I> Task: Load bpmp-fw (0x5001f41d) [0001.100] I> Active chain: 0 [0001.103] I> Slot: 0 [0001.105] I> Binary[15] block-0 (partition size: 0x180000) [0001.112] I> get_binary_info: Binary name: BPMP_FW [0001.117] I> Size of crypto header is 8192 [0001.121] I> BCH load address is : 0x807fe000 [0001.127] I> Size of crypto header is 8192 [0001.132] I> BCH of BPMP_FW read from storage [0001.136] I> BCH address is : 0x807fe000 [0001.142] I> BPMP_FW header integrity check is success [0001.147] I> Binary magic in BCH component 0 is BPMF [0001.152] I> component binary type is 15 [0001.157] I> Size of crypto header is 8192 [0001.172] I> BPMP_FW binary is read from storage [0001.179] I> BPMP_FW binary integrity check is success [0001.185] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0001.193] I> Active chain: 0 [0001.196] I> Slot: 0 [0001.198] I> Binary[16] block-10000 (partition size: 0x400000) [0001.205] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.211] I> Size of crypto header is 8192 [0001.215] I> BCH load address is : 0x807fc000 [0001.221] I> Size of crypto header is 8192 [0001.226] I> BCH of BPMP_FW_DTB read from storage [0001.231] I> BCH address is : 0x807fc000 [0001.236] I> BPMP_FW_DTB header integrity check is success [0001.242] I> Binary magic in BCH component 0 is BPMD [0001.247] I> component binary type is 16 [0001.252] I> Size of crypto header is 8192 [0001.258] I> BPMP_FW_DTB binary is read from storage [0001.264] I> BPMP_FW_DTB binary integrity check is success [0001.270] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20480) [0001.278] I> Task: Load psc-fw (0x5001f5a5) [0001.284] I> Active chain: 0 [0001.287] I> Slot: 0 [0001.290] I> Binary[17] block-0 (partition size: 0xc0000) [0001.296] I> get_binary_info: Binary name: PSC_FW [0001.301] I> Size of crypto header is 8192 [0001.305] I> BCH load address is : 0x80ffe000 [0001.311] I> Size of crypto header is 8192 [0001.316] I> BCH of PSC_FW read from storage [0001.320] I> BCH address is : 0x80ffe000 [0001.326] I> PSC_FW header integrity check is success [0001.331] I> Binary magic in BCH component 0 is PFWP [0001.337] I> component binary type is 17 [0001.341] I> Size of crypto header is 8192 [0001.349] I> PSC_FW binary is read from storage [0001.355] I> PSC_FW binary integrity check is success [0001.361] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.369] I> Task: Load nvdec-fw (0x5001f619) [0001.375] I> Active chain: 0 [0001.378] I> Slot: 0 [0001.380] I> Binary[7] block-0 (partition size: 0x100000) [0001.386] I> get_binary_info: Binary name: NVDEC [0001.391] I> Size of crypto header is 8192 [0001.396] I> BCH load address is : 0x800fe000 [0001.401] I> Size of crypto header is 8192 [0001.406] I> BCH of NVDEC read from storage [0001.411] I> BCH address is : 0x800fe000 [0001.416] I> NVDEC header integrity check is success [0001.422] I> Binary magic in BCH component 0 is NDEC [0001.427] I> component binary type is 7 [0001.431] I> Size of crypto header is 8192 [0001.439] I> NVDEC binary is read from storage [0001.444] I> NVDEC binary integrity check is success [0001.450] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.460] I> Task: Load tsec-fw (0x5001f9a5) [0001.466] I> TSEC-FW load support not enabled [0001.470] I> Task: GPIO interrupt map (0x50014541) [0001.477] I> Task: SC7 context save (0x5001fe9d) [0001.482] I> NV_SC7 Context addr: 0xa0000000 [0001.488] I> Active chain: 0 [0001.491] I> Slot: 0 [0001.493] I> Binary[27] block-0 (partition size: 0x100000) [0001.500] I> get_binary_info: Binary name: BR_BCT [0001.505] I> Size of crypto header is 8192 [0001.509] I> Size of crypto header is 8192 [0001.514] I> BR_BCT binary is read from storage [0001.519] I> BR_BCT binary integrity check is success [0001.525] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.533] I> Active chain: 0 [0001.536] I> Slot: 0 [0001.538] I> Binary[13] block-0 (partition size: 0x30000) [0001.544] I> get_binary_info: Binary name: SC7-FW [0001.549] I> Size of crypto header is 8192 [0001.554] I> Size of crypto header is 8192 [0001.558] I> BCH load address is : 0xa0002000 [0001.564] I> Size of crypto header is 8192 [0001.569] I> BCH of SC7-FW read from storage [0001.573] I> BCH address is : 0xa0002000 [0001.579] I> SC7-FW header integrity check is success [0001.584] I> Binary magic in BCH component 0 is WB0B [0001.590] I> component binary type is 13 [0001.594] I> Size of crypto header is 8192 [0001.600] I> SC7-FW binary is read from storage [0001.606] I> SC7-FW binary integrity check is success [0001.611] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26220) [0001.619] I> Active chain: 0 [0001.622] I> Slot: 0 [0001.625] I> Binary[22] block-0 (partition size: 0x30000) [0001.631] I> get_binary_info: Binary name: PSC_RF [0001.636] I> Size of crypto header is 8192 [0001.641] I> Size of crypto header is 8192 [0001.645] I> BCH load address is : 0xa002a220 [0001.651] I> Size of crypto header is 8192 [0001.655] I> BCH of PSC_RF read from storage [0001.660] I> BCH address is : 0xa002a220 [0001.666] I> PSC_RF header integrity check is success [0001.671] I> Binary magic in BCH component 0 is PSCR [0001.676] I> component binary type is 22 [0001.681] I> Size of crypto header is 8192 [0001.686] I> PSC_RF binary is read from storage [0001.692] I> PSC_RF binary integrity check is success [0001.697] I> Binary PSC_RF loaded successfully at 0xa002c220 (0x1b000) [0001.720] I> Active chain: 0 [0001.723] I> Slot: 0 [0001.725] I> Binary[14] block-0 (partition size: 0x20000) [0001.731] I> get_binary_info: Binary name: MB2_RF [0001.736] I> Size of crypto header is 8192 [0001.741] I> Size of crypto header is 8192 [0001.745] I> BCH load address is : 0xa008ea48 [0001.751] I> Size of crypto header is 8192 [0001.756] I> BCH of MB2_RF read from storage [0001.760] I> BCH address is : 0xa008ea48 [0001.766] I> MB2_RF header integrity check is success [0001.771] I> Binary magic in BCH component 0 is MB2R [0001.777] I> component binary type is 14 [0001.781] I> Size of crypto header is 8192 [0001.787] I> MB2_RF binary is read from storage [0001.792] I> MB2_RF binary integrity check is success [0001.798] I> Binary MB2_RF loaded successfully at 0xa0090a48 (0x1bfa0) [0001.806] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.814] I> SC7 context fuse-bypass data is empty [0001.821] I> SC7 context save done [0001.826] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0001.832] I> Loading MB2 [0001.835] I> Active chain: 0 [0001.838] I> Slot: 0 [0001.840] I> Binary[6] block-0 (partition size: 0x80000) [0001.846] I> get_binary_info: Binary name: MB2 [0001.851] I> Size of crypto header is 8192 [0001.856] I> BCH load address is : 0x8007e000 [0001.861] I> Size of crypto header is 8192 [0001.866] I> BCH of MB2 read from storage [0001.870] I> BCH address is : 0x8007e000 [0001.876] I> MB2 header integrity check is success [0001.881] I> Binary magic in BCH component 0 is MB2B [0001.886] I> component binary type is 6 [0001.890] I> Size of crypto header is 8192 [0001.899] I> MB2 binary is read from storage [0001.905] I> MB2 binary integrity check is success [0001.910] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0001.919] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0001.926] I> Task: Prepare MB2 params (0x5000d8f1) [0001.934] I> BR-BCT Boot Chain Fields [0001.938] I> u32_non_gpio_select_boot_chain : 0 [0001.943] I> u32_num_boot_chains : 2 [0001.948] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.953] I> Task: Program misc carveouts (0x50014bcd) [0001.960] I> Program IPC carveouts [0001.967] I> Task: Dram ecc test (0x500117a5) [0001.973] I> Task: Misc NV security settings (0x5000d0f9) [0001.979] I> NVDEC sticky bits programming done [0001.984] I> Successfully powergated NVDEC [0001.989] I> Task: Disable/Reload WDT (0x500206e1) [0001.995] I> Programmed SLCG global override := 0x0 [0002.000] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f1724 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x830000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x500186cc) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 14 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82f600000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82f300000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x83a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9507824 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x83a000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50015ae4) I> Task: Enable FSI VMON (0x5001566c) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x500156c4) I> FSITHERM max temp = 32 I> FSITHERM min temp = 31 I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x836000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: FSI padctl context save (0x5001885c) I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ÿáI> Received ACK from psc I> TasÿçINFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ÿâ bpmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5 is 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ÿák: Start secure NOR provision (0x50018af8) I> Task: Load FSI keyblob (0x500160b4) I> Skipping FSI key blob copy I> Task: Unhaltÿâinitialized avfs_clk_platform initialized powergate ÿá AUXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalÿâinitialized dvs ÿát sÿâinitialized clk_mach_config initialized pm suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ÿå[ 2.474615] Camera-FW on t234-rce-safe started ÿáuccÿåTCU early console enabled. ÿáessful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bootloader ÿè ÿáI> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader ÿâinitialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq ÿáI> Scratch RSV109: 0x00000001 active chainÿâmissing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ÿá: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> ÿâinitialized clk_cal_late initialized noc_late initialized cvc ÿáBinary cpubl loaded successfully at 0x8ÿâinitialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post ÿå[ 2.647953] Camerÿâbpmp: init complete ÿåa-FW on t234-rce-safe ready SHA1=10150ec0 (crt 12.948 ms, total boot 187.346 ms) ÿá2ea00000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x83fdfe000 I> Relocating OP-TEE dtb from: 0x83feff770 to 0x82ef30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x7aef70000 I> [1] START: 0x836000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x830000400 I> EKB detected (length: 0x410) @ VA:0x830000400 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82ef30000 I> Task: OEM SC7 context save (0x50018958) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> Task: Bootchain failure check (0x5000242c) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ÿäNOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TÿèDCE: FÿäCÿèW Boot Done ÿä: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ÿá Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) [=3h Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 15:09:44 PST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x808260518 SMBIOS=0xffff0000 SMBIOS 3.0=0x806c20000 MEMATTR=0x807611018 ESRT=0x8064f7018 RNG=0x82a9ff398 MEMRESERVE=0x807612f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008064f7018 to 0x00000008064f7050. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000081a800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000837ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000803ffffff] [ 0.000000] node 0: [mem 0x0000000804000000-0x00000008061bffff] [ 0.000000] node 0: [mem 0x00000008061c0000-0x0000000806824fff] [ 0.000000] node 0: [mem 0x0000000806825000-0x00000008069a3fff] [ 0.000000] node 0: [mem 0x00000008069a4000-0x0000000806bcffff] [ 0.000000] node 0: [mem 0x0000000806bd0000-0x0000000806bdffff] [ 0.000000] node 0: [mem 0x0000000806be0000-0x0000000806c1ffff] [ 0.000000] node 0: [mem 0x0000000806c20000-0x0000000806c2ffff] [ 0.000000] node 0: [mem 0x0000000806c30000-0x0000000806dfffff] [ 0.000000] node 0: [mem 0x0000000806e00000-0x0000000806e4ffff] [ 0.000000] node 0: [mem 0x0000000806e50000-0x000000080751ffff] [ 0.000000] node 0: [mem 0x0000000807520000-0x000000080756ffff] [ 0.000000] node 0: [mem 0x0000000807570000-0x00000008075dffff] [ 0.000000] node 0: [mem 0x00000008075e0000-0x00000008075fffff] [ 0.000000] node 0: [mem 0x0000000807600000-0x000000080761ffff] [ 0.000000] node 0: [mem 0x0000000807620000-0x000000080763ffff] [ 0.000000] node 0: [mem 0x0000000807640000-0x000000080775ffff] [ 0.000000] node 0: [mem 0x0000000807760000-0x000000080793ffff] [ 0.000000] node 0: [mem 0x0000000807940000-0x000000080798ffff] [ 0.000000] node 0: [mem 0x0000000807990000-0x0000000807acffff] [ 0.000000] node 0: [mem 0x0000000807ad0000-0x0000000807b9ffff] [ 0.000000] node 0: [mem 0x0000000807ba0000-0x0000000807d7ffff] [ 0.000000] node 0: [mem 0x0000000807d80000-0x0000000807d9ffff] [ 0.000000] node 0: [mem 0x0000000807da0000-0x0000000807daffff] [ 0.000000] node 0: [mem 0x0000000807db0000-0x000000080838ffff] [ 0.000000] node 0: [mem 0x0000000808390000-0x000000080842ffff] [ 0.000000] node 0: [mem 0x0000000808430000-0x000000080852ffff] [ 0.000000] node 0: [mem 0x0000000808530000-0x00000008085cffff] [ 0.000000] node 0: [mem 0x00000008085d0000-0x00000008086cffff] [ 0.000000] node 0: [mem 0x00000008086d0000-0x000000080876ffff] [ 0.000000] node 0: [mem 0x0000000808770000-0x000000080903ffff] [ 0.000000] node 0: [mem 0x0000000809040000-0x000000080921ffff] [ 0.000000] node 0: [mem 0x0000000809220000-0x000000082a9affff] [ 0.000000] node 0: [mem 0x000000082a9b0000-0x000000082a9fffff] [ 0.000000] node 0: [mem 0x000000082aa00000-0x000000082e7fffff] [ 0.000000] node 0: [mem 0x000000082ea00000-0x000000082eefffff] [ 0.000000] node 0: [mem 0x0000000836000000-0x0000000837ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000837ffffff] [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7937792 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 31048588K/32257024K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 946292K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000769] Console: colour dummy device 80x25 [ 0.000957] printk: console [tty0] enabled [ 0.000997] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001006] pid_max: default: 32768 minimum: 301 [ 0.001073] LSM: Security Framework initializing [ 0.001095] Yama: becoming mindful. [ 0.001114] SELinux: Initializing. [ 0.001205] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001252] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003273] rcu: Hierarchical SRCU implementation. [ 0.003372] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.004080] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.004090] DTB Build time: Jan 24 2023 15:26:09 [ 0.005533] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.005649] Remapping and enabling EFI services. [ 0.006858] smp: Bringing up secondary CPUs ... [ 0.035561] Detected PIPT I-cache on CPU1 [ 0.035602] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035635] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.064262] Detected PIPT I-cache on CPU2 [ 0.064272] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.064285] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.092874] Detected PIPT I-cache on CPU3 [ 0.092883] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.092896] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.123549] Detected PIPT I-cache on CPU4 [ 0.123569] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123595] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.152240] Detected PIPT I-cache on CPU5 [ 0.152249] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.152265] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.180876] Detected PIPT I-cache on CPU6 [ 0.180887] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.180902] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.209520] Detected PIPT I-cache on CPU7 [ 0.209530] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.209545] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.240204] Detected PIPT I-cache on CPU8 [ 0.240227] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.240254] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.268897] Detected PIPT I-cache on CPU9 [ 0.268907] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.268921] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.298148] Detected PIPT I-cache on CPU10 [ 0.298158] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.298174] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.327394] Detected PIPT I-cache on CPU11 [ 0.327404] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.327420] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.327475] smp: Brought up 1 node, 12 CPUs [ 0.327540] SMP: Total of 12 processors activated. [ 0.327545] CPU features: detected: Privileged Access Never [ 0.327547] CPU features: detected: LSE atomic instructions [ 0.327550] CPU features: detected: User Access Override [ 0.327553] CPU features: detected: 32-bit EL0 Support [ 0.327556] CPU features: detected: Common not Private translations [ 0.327560] CPU features: detected: RAS Extension Support [ 0.327563] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.327566] CPU features: detected: CRC32 instructions [ 0.327569] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.363447] CPU: All CPU(s) started at EL2 [ 0.365864] devtmpfs: initialized [ 0.383494] Registered cp15_barrier emulation handler [ 0.383507] Registered setend emulation handler [ 0.383513] KASLR enabled [ 0.383647] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.383662] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.385096] pinctrl core: initialized pinctrl subsystem [ 0.385659] SMBIOS 3.0.0 present. [ 0.385668] DMI: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 0.385937] NET: Registered protocol family 16 [ 0.386768] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.386969] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.387169] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.387197] audit: initializing netlink subsys (disabled) [ 0.387283] audit: type=2000 audit(0.384:1): state=initialized audit_enabled=0 res=1 [ 0.387448] thermal_sys: Registered thermal governor 'step_wise' [ 0.387450] thermal_sys: Registered thermal governor 'power_allocator' [ 0.387455] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.389988] cpuidle: using governor menu [ 0.390092] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.390213] ASID allocator initialised with 32768 entries [ 0.390308] Serial: AMBA PL011 UART driver [ 0.392120] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.392145] Tegra reboot handler registered. [ 0.410697] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.410714] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.410723] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.410730] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.410738] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.410746] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.410753] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.410760] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.410766] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.410772] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.410778] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.410785] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.410792] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.410797] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.410804] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.410810] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.410817] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.410829] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.410854] mc-err: mcerr ops are set to t23x [ 0.411508] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 67, base_baud = 0) is a SBSA [ 1.681190] printk: console [ttyAMA0] enabled [ 1.689538] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.696252] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.702953] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.709653] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.718166] ACPI: Interpreter disabled. [ 1.723186] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.728075] vbusA-cvb: supplied by vdd-5v-sys [ 1.732549] vbusB-cvb: supplied by vdd-5v-sys [ 1.737031] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.741932] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.747010] iommu: Default domain type: Translated [ 1.751933] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.758191] SCSI subsystem initialized [ 1.762000] usbcore: registered new interface driver usbfs [ 1.767497] usbcore: registered new interface driver hub [ 1.772820] usbcore: registered new device driver usb [ 1.778045] mc: Linux media interface: v0.10 [ 1.782322] videodev: Linux video capture interface: v2.00 [ 1.787948] pps_core: LinuxPPS API ver. 1 registered [ 1.792911] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.802047] PTP clock support registered [ 1.806168] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.813334] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.820999] Registered efivars operations [ 1.825137] FPGA manager framework [ 1.828573] Advanced Linux Sound Architecture Driver Initialized. [ 1.834938] Bluetooth: Core ver 2.22 [ 1.838521] NET: Registered protocol family 31 [ 1.842963] Bluetooth: HCI device and connection manager initialized [ 1.849322] Bluetooth: HCI socket layer initialized [ 1.854200] Bluetooth: L2CAP socket layer initialized [ 1.859257] Bluetooth: SCO socket layer initialized [ 1.864627] camchar: rtcpu character device driver loaded [ 1.870245] clocksource: Switched to clocksource arch_sys_counter [ 2.028942] VFS: Disk quotas dquot_6.6.0 [ 2.032916] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.039943] pnp: PnP ACPI: disabled [ 2.045334] la/ptsa driver initialized. [ 2.049224] NET: Registered protocol family 2 [ 2.053788] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.063497] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.072241] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.080533] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.088427] TCP: Hash tables configured (established 262144 bind 65536) [ 2.095141] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.102071] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.109525] NET: Registered protocol family 1 [ 2.114147] RPC: Registered named UNIX socket transport module. [ 2.120081] RPC: Registered udp transport module. [ 2.124785] RPC: Registered tcp transport module. [ 2.129486] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.135939] PCI: CLS 0 bytes, default 64 [ 2.139969] Trying to unpack rootfs image as initramfs... [ 2.255850] Freeing initrd memory: 8208K [ 2.262155] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.270072] kvm [1]: IPA Size Limit: 48 bits [ 2.274540] kvm [1]: VHE mode initialized successfully [ 2.280384] Initialise system trusted keyrings [ 2.284913] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.293552] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.299668] NFS: Registering the id_resolver key type [ 2.304733] Key type id_resolver registered [ 2.308914] Key type id_legacy registered [ 2.312955] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.319666] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.327073] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.342971] NET: Registered protocol family 38 [ 2.347419] Key type asymmetric registered [ 2.351512] Asymmetric key parser 'x509' registered [ 2.356408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.363867] io scheduler mq-deadline registered [ 2.368399] io scheduler kyber registered [ 2.376324] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.381930] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.387522] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.393105] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.401181] tegra_dc_assign_hw_data: no matching compatible node [ 2.407197] tegradccommon module_init failed [ 2.411466] tegradc module_init failed [ 2.415459] EINJ: ACPI disabled. [ 2.420205] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.427088] tegra-pmc: ### PMC reset source: MAINSWRST [ 2.432226] tegra-pmc: ### PMC reset level: L1 [ 2.436666] tegra-pmc: ### PMC reset status reg: 0x2d [ 2.442971] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.455462] random: fast init done [ 2.455501] printk: console [ttyTCU0] enabled [ 4.112547] arm-smmu 12000000.iommu: probing hardware configuration... [ 4.120595] arm-smmu 12000000.iommu: SMMUv2 with: [ 4.125444] arm-smmu 12000000.iommu: stage 1 translation [ 4.131000] arm-smmu 12000000.iommu: stage 2 translation [ 4.136549] arm-smmu 12000000.iommu: nested translation [ 4.142005] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.149426] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.158244] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.164938] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.171628] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.179120] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.185819] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.190636] arm-smmu 10000000.iommu: stage 1 translation [ 4.196169] arm-smmu 10000000.iommu: stage 2 translation [ 4.201707] arm-smmu 10000000.iommu: nested translation [ 4.207171] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.214580] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.223406] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.230103] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.236797] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.243920] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.250531] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.255280] arm-smmu 8000000.iommu: stage 1 translation [ 4.260733] arm-smmu 8000000.iommu: stage 2 translation [ 4.266179] arm-smmu 8000000.iommu: nested translation [ 4.271536] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.278856] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.287582] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.294190] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.300801] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.308069] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.318549] tegra_profiler: version: 1.150, samples/io: 50/29 [ 4.324524] tegra_profiler: auth: init [ 4.328629] nvsciipc: loaded module [ 4.333712] tun: Universal TUN/TAP device driver, 1.6 [ 4.339349] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.346762] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.352248] e1000e: Intel(R) PRO/1000 Network Driver [ 4.357342] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.363436] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.368977] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.374853] PPP generic driver version 2.4.2 [ 4.379277] PPP BSD Compression module registered [ 4.384101] PPP Deflate Compression module registered [ 4.389296] PPP MPPE Compression module registered [ 4.394241] usbcore: registered new interface driver r8152 [ 4.399876] usbcore: registered new interface driver asix [ 4.405425] usbcore: registered new interface driver ax88179_178a [ 4.411686] usbcore: registered new interface driver cdc_ether [ 4.417679] usbcore: registered new interface driver net1080 [ 4.423494] usbcore: registered new interface driver cdc_subset [ 4.429579] usbcore: registered new interface driver zaurus [ 4.435314] usbcore: registered new interface driver cdc_ncm [ 4.441130] usbcore: registered new interface driver aqc111 [ 4.446957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.453321] ohci-pci: OHCI PCI platform driver [ 4.457893] ohci-platform: OHCI generic platform driver [ 4.463539] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.469940] usbcore: registered new interface driver uas [ 4.475416] usbcore: registered new interface driver usb-storage [ 4.481735] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.487828] mousedev: PS/2 mouse device common for all mice [ 4.493578] usbcore: registered new interface driver xpad [ 4.500942] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.506419] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:31 UTC (31) [ 4.514648] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.521063] i2c /dev entries driver [ 4.524758] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.530595] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.536388] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.542106] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.547782] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.553466] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.559151] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.564840] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.573003] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.581582] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.591045] device-mapper: uevent: version 1.0.3 [ 4.595874] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.605715] sdhci: Secure Digital Host Controller Interface driver [ 4.612053] sdhci: Copyright(c) Pierre Ossman [ 4.616516] Synopsys Designware Multimedia Card Interface Driver [ 4.622747] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.628747] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 4.629131] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 4.629354] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.630835] tegra-bpmp bpmp: firmware: 9a7bb16aee9be45a56e6-ccd7dae126b [ 4.632000] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.632548] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.640384] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.670270] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ÿâdebugfs initialized ÿá[ 5.878217] hid: raw HID events driver (C) Jiri Kosina [ 5.883962] usbcore: registered new interface driver usbhid [ 5.889696] usbhid: USB HID core driver [ 5.894408] tegra-dce d800000.dce: Adding to iommu group 5 [ 5.901379] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 5.910489] tegra234-aon c000000.aon: Adding to iommu group 6 [ 5.916877] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.923445] c000000.aon:hsp: probed [ 5.925845] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 5.938306] tegra234-aon c000000.aon: init done [ 5.938662] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 5.943000] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.949226] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.956248] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.962254] tegra23x-psc e860000.psc: init done [ 5.971178] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.971179] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.971196] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.976006] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 5.984242] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.984626] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.993784] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 6.001783] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 6.001784] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.001796] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.012181] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 6.016371] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 6.024920] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.085726] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.097448] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.109306] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 6.121877] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 6.134731] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.146767] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (117) [ 6.153596] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.164801] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=10150ec03f8849d1537396903b70d4a48a255aba [ 6.178469] t19x_cache tegra-cache: probed [ 6.182931] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.200336] optee: probing for conduit method. [ 6.204927] optee: revision 3.19 (18d0f61b) [ 6.205600] optee: dynamic shared memory is enabled [ 6.215027] optee: initialized driver [ 6.232235] nvpmodel: initialized successfully [ 6.236916] tegra_hv: get_hvd: not initialized yet [ 6.241860] user_ivc_mempool: hypervisor not present [ 6.247669] usbcore: registered new interface driver snd-usb-audio [ 6.254710] u32 classifier [ 6.257491] input device check on [ 6.261272] Actions configured [ 6.264933] Initializing XFRM netlink socket [ 6.269786] NET: Registered protocol family 10 [ 6.275926] Segment Routing with IPv6 [ 6.279748] NET: Registered protocol family 17 [ 6.284336] NET: Registered protocol family 15 [ 6.288963] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.302705] Bluetooth: RFCOMM socket layer initialized [ 6.308019] Bluetooth: RFCOMM ver 1.11 [ 6.311889] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.317974] Bluetooth: HIDP socket layer initialized [ 6.323636] 9pnet: Installing 9P2000 support [ 6.328092] Key type dns_resolver registered [ 6.333117] registered taskstats version 1 [ 6.337351] Loading compiled-in X.509 certificates [ 6.345595] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 6.356149] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 6.368890] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.376039] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 6.388808] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.395603] tegra194-pcie 141a0000.pcie: Adding to iommu group 11 [ 6.407733] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.439345] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.449459] host1x 13e40000.host1x: Adding to iommu group 13 [ 7.467245] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 7.467582] random: crng init done [ 7.484839] host1x 13e40000.host1x: initialized [ 7.489868] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 7.498014] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 7.510000] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 7.518107] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.530090] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 7.538171] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.550146] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 7.558271] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.570245] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 7.578336] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.590312] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 7.598416] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.610373] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 7.618466] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.630469] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 7.638551] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.650525] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 7.658639] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.670646] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 7.678738] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.690734] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 7.698829] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.710767] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 7.718843] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.730830] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 7.738932] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.750915] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 7.758994] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.770982] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 7.779046] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.791036] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 7.799135] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.811146] falcon 15340000.vic: Adding to iommu group 30 [ 7.821962] falcon 15340000.vic: initialized [ 7.826632] falcon 15380000.nvjpg: Adding to iommu group 31 [ 7.835754] falcon 15380000.nvjpg: initialized [ 7.840468] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 7.850157] falcon 15540000.nvjpg1: initialized [ 7.854959] falcon 154c0000.nvenc: Adding to iommu group 33 [ 7.865844] falcon 154c0000.nvenc: initialized [ 7.870546] falcon 15a50000.ofa: Adding to iommu group 34 [ 7.879713] falcon 15a50000.ofa: initialized [ 7.884242] nvdec 15480000.nvdec: Adding to iommu group 35 [ 7.896783] nvdec 15480000.nvdec: initialized [ 7.901392] tsec 15500000.tsec: Adding to iommu group 36 [ 7.911807] tsec 15500000.tsec: initialized [ 7.918797] gic 2a41000.agic-controller: GIC IRQ controller registered [ 7.935209] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.951112] gpio-394 (camera-control-output-low): hogged as output/low [ 7.957853] gpio-397 (camera-control-output-low): hogged as output/low [ 7.964611] gpio-487 (camera-control-output-low): hogged as output/low [ 7.971347] gpio-486 (camera-control-output-low): hogged as output/low [ 7.978994] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 7.986152] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 7.993109] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 7.999666] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 8.006094] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 8.012293] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 8.020380] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 8.028914] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 8.038187] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 8.047731] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 8.054303] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 8.062538] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 8.070615] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 8.080501] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 8.087298] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 8.097190] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 8.103963] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 8.113820] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 8.120617] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 8.129344] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 8.140701] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 8.149408] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 8.160769] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 8.169508] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 8.180854] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 8.189562] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 8.200919] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 8.209633] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 8.220990] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 8.229695] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 8.241052] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 8.249794] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 8.261139] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 8.269866] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 8.281221] pva 16000000.pva0: Adding to iommu group 48 [ 8.306442] pva 16000000.pva0: initialized [ 8.319865] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 8.334420] nvdla 15880000.nvdla0: initialized [ 8.340639] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 8.355745] nvdla 158c0000.nvdla1: initialized [ 8.361934] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 8.368984] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 8.376474] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 8.383109] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 8.389885] serial-tegra 3100000.serial: Adding to iommu group 2 [ 8.396542] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 8.406213] serial-tegra 3110000.serial: Adding to iommu group 2 [ 8.412718] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 65, base_baud = 0) is a TEGRA_UART [ 8.422290] serial-tegra 3130000.serial: Adding to iommu group 2 [ 8.428752] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 66, base_baud = 0) is a TEGRA_UART [ 8.456132] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 8.465882] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.471457] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.480097] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 8.489711] tegra-xusb 3610000.xhci: irq 235, io mem 0x03610000 [ 8.496176] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.504683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.512109] usb usb1: Product: xHCI Host Controller [ 8.517119] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.523396] usb usb1: SerialNumber: 3610000.xhci [ 8.528802] hub 1-0:1.0: USB hub found [ 8.532692] hub 1-0:1.0: 4 ports detected [ 8.537093] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.542651] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.550447] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.557956] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.566472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.573905] usb usb2: Product: xHCI Host Controller [ 8.578918] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.585198] usb usb2: SerialNumber: 3610000.xhci [ 8.590417] hub 2-0:1.0: USB hub found [ 8.594293] hub 2-0:1.0: 4 ports detected [ 8.631298] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 8.656024] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz [ 8.669316] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 8.683619] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 8.696484] tegra194-cpufreq e000000.ccplex: probed with ICC [ 8.704302] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 8.706182] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.711714] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 8.712413] mmc0: CQHCI version 5.10 [ 8.724508] irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.726539] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.734182] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 8.740301] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.742831] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.765921] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.798245] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 8.828932] mmc0: Command Queue Engine enabled [ 8.833502] mmc0: periodic cache flush enabled [ 8.838070] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 8.845077] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 8.849925] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 8.868004] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 8.882386] tegra194-pcie 14100000.pcie: Link up [ 8.888310] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 8.895127] pci_bus 0001:00: root bus resource [bus 00-ff] [ 8.900775] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 8.910617] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 8.921443] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 8.929371] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 8.935710] pci 0001:00:00.0: PME# supported from D0 D3hot [ 8.945871] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 8.952221] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 8.958166] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 8.958447] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 8.966599] pci 0001:01:00.0: supports D1 D2 [ 8.973919] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.978316] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.985657] usb 1-3: Product: Bluetooth Radio [ 8.996888] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 8.996939] usb 1-3: Manufacturer: Realtek [ 9.004368] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 9.008575] usb 1-3: SerialNumber: 00e04c000001 [ 9.019606] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 9.027591] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 9.033879] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 9.039252] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 9.045521] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 9.052884] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.061640] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.070593] pcieport 0001:00:00.0: Adding to iommu group 9 [ 9.076462] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 9.082735] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 9.083215] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 9.089270] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.103850] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.111018] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.119703] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.128385] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.132456] usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcdDevice= 1.40 [ 9.145475] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.152822] usb 2-3: Product: 4-Port USB 3.0 Hub [ 9.157571] usb 2-3: Manufacturer: Generic [ 9.172759] hub 2-3:1.0: USB hub found [ 9.178786] hub 2-3:1.0: 4 ports detected [ 9.250241] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 9.428040] usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcdDevice= 1.40 [ 9.436462] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.443786] usb 1-4: Product: 4-Port USB 2.0 Hub [ 9.448529] usb 1-4: Manufacturer: Generic [ 9.454732] hub 1-4:1.0: USB hub found [ 9.459880] hub 1-4:1.0: 4 ports detected [ 10.234545] tegra194-pcie 14160000.pcie: Phy link never came up [ 10.240697] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 10.247515] pci_bus 0004:00: root bus resource [bus 00-ff] [ 10.253148] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 10.263245] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.274083] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 10.282002] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.288335] pci 0004:00:00.0: PME# supported from D0 D3hot [ 10.301675] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 10.307075] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.316001] pcieport 0004:00:00.0: Adding to iommu group 10 [ 10.321967] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 10.328245] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 10.334198] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 10.340273] pci 0004:00:00.0: Removing from iommu group 10 [ 10.345915] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 10.353331] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.359979] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 10.365002] avdd-cam-2v8: supplied by vdd-3v3-sys [ 10.369934] vdd-dp: supplied by vdd-3v3-sys [ 10.374381] vdd-3v3-sd: supplied by vdd-3v3-sys [ 10.379332] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 10.386565] tegra194-isp5 14800000.isp: initialized [ 10.400008] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 10.406435] (NULL device *): fops function table already registered [ 10.413696] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 10.420518] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.420615] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 10.441964] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 10.535247] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 10.542415] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 10.551094] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 10.559775] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 11.506591] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 11.662545] tegra194-pcie 141a0000.pcie: Phy link never came up [ 11.668683] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 11.675500] pci_bus 0005:00: root bus resource [bus 00-ff] [ 11.681134] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 11.691229] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.702032] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 11.709953] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 11.716281] pci 0005:00:00.0: PME# supported from D0 D3hot [ 11.729697] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 11.735090] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.744026] pcieport 0005:00:00.0: Adding to iommu group 11 [ 11.750001] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 11.756280] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 11.762224] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 11.768301] pci 0005:00:00.0: Removing from iommu group 11 [ 11.773939] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 11.781541] nvethernet 6810000.ethernet: Adding to iommu group 51 [ 11.788136] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 11.796285] nvethernet 6810000.ethernet: failed to read MDIO address [ 11.802816] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 11.809703] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.818567] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.827418] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 12.219331] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:a4:b5:60 [ 12.227269] nvethernet 6810000.ethernet: Macsec not enabled [ 12.233007] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 12.242324] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 12.250992] irq: IRQ304: trimming hierarchy from :pmc@c360000 [ 12.256961] irq: IRQ305: trimming hierarchy from :interrupt-controller@f400000-1 [ 12.264630] irq: IRQ306: trimming hierarchy from :pmc@c360000 [ 12.270586] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 12.278164] tegra-se-nvhost 15810000.se: Adding to iommu group 52 [ 12.284731] tegra-se-nvhost 15810000.se: initialized [ 12.300852] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 12.307230] tegra-se-nvhost 15820000.se: Adding to iommu group 53 [ 12.313759] tegra-se-nvhost 15820000.se: initialized [ 12.321006] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 12.327351] tegra-se-nvhost 15840000.se: Adding to iommu group 54 [ 12.333859] tegra-se-nvhost 15840000.se: initialized [ 12.341095] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 12.347900] tegra_actmon d230000.actmon: in actmon_register()... [ 12.354251] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 12.360268] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 12.368634] hvc_sysfs: hypervisor is not present ÿâWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ÿá[ 12.505975] ALSA device list: [ 12.509029] No soundcards found. [ 12.513090] Freeing unused kernel memory: 3968K [ 12.517790] Run /init as init process [ 12.533495] Root device found: mmcblk0p1 [ 12.538024] Found dev node: /dev/mmcblk0p1 [ 12.570093] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.579229] Rootfs mounted over mmcblk0p1 [ 12.598147] Switching from initrd to actual rootfs [ 12.699619] systemd[1]: System time before build time, advancing clock. [ 12.742610] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.766246] systemd[1]: Detected architecture arm64. [ 12.801783] systemd[1]: No hostname configured. [ 12.806463] systemd[1]: Set hostname to . [ 12.990474] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 13.003531] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 13.013077] systemd[1]: Created slice system-modprobe.slice. [ 13.019271] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.029009] systemd[1]: Reached target Slices. [ 13.033632] systemd[1]: Reached target Swap. [ 13.038314] systemd[1]: Listening on RPCbind Server Activation Socket. [ 13.045194] systemd[1]: Listening on fsck to fsckd communication Socket. [ 13.052190] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 13.059148] systemd[1]: Listening on Journal Audit Socket. [ 13.064925] systemd[1]: Listening on Journal Socket (/dev/log). [ 13.071171] systemd[1]: Listening on Journal Socket. [ 13.076429] systemd[1]: Listening on udev Control Socket. [ 13.082095] systemd[1]: Listening on udev Kernel Socket. [ 13.088505] systemd[1]: Mounting Huge Pages File System... [ 13.095090] systemd[1]: Mounting POSIX Message Queue File System... [ 13.102569] systemd[1]: Mounting Kernel Debug File System... [ 13.109295] systemd[1]: Mounting Kernel Trace File System... [ 13.116238] systemd[1]: Starting Journal Service... [ 13.122186] systemd[1]: Starting Set the console keyboard layout... [ 13.129603] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.139451] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 13.147957] systemd[1]: Starting Load Kernel Module efi_pstore... [ 13.155251] systemd[1]: Starting Load Kernel Module pstore_blk... [ 13.162915] systemd[1]: Starting Load Kernel Module pstore_zone... [ 13.170379] systemd[1]: Starting Load Kernel Module ramoops... [ 13.177296] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 13.185341] systemd[1]: Started Nameserver information manager. [ 13.191705] systemd[1]: Reached target Network (Pre). [ 13.197928] systemd[1]: Starting Set console scheme... [ 13.203917] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.213313] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 13.230261] systemd[1]: Starting Load Kernel Modules... [ 13.236518] systemd[1]: Starting Remount Root and Kernel File Systems... [ 13.243678] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 13.244386] systemd[1]: Starting udev Coldplug all Devices... [ 13.244594] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 13.244700] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000833000000,16777216 [ 13.244703] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 13.244709] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 13.244710] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 13.244715] nvmap_page_pool_init: Total RAM pages: 7830727 [ 13.244716] nvmap_page_pool_init: nvmap page pool size: 978840 pages (3823 MB) [ 13.244762] nvmap_background_zero_thread: PP zeroing thread starting. [ 13.244845] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 13.247877] misc nvmap: created heap fsi base 0x0000000833000000 size (16384KiB) [ 13.314731] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 13.314731] [ 13.348887] systemd[1]: Started Journal Service. [ 13.376893] systemd-journald[302]: Received client request to flush runtime journal. [ 15.390344] Internal error: SP/PC alignment exception: 8a000000 [#1] PREEMPT SMP [ 15.397970] Modules linked in: ina3221 pwm_fan nvgpu nvmap ip_tables x_tables [ 15.405330] CPU: 0 PID: 12 Comm: ksoftirqd/0 Not tainted 5.10.104-tegra #1 [ 15.412399] Hardware name: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 15.421428] pstate: 60c00009 (nZCv daif +PAN +UAO -TCO BTYPE=--) [ 15.427614] pc : 0x1a38df0f0a9b2a [ 15.431018] lr : rcu_core+0x274/0x980 [ 15.434774] sp : ffff8000100ebc90 [ 15.438181] x29: ffff8000100ebc90 x28: ffffa5a4d79b7000 [ 15.443639] x27: ffff1fb080160000 x26: ffff1fb080160000 [ 15.449096] x25: ffff8000100ebd20 x24: ffff1fb7aeba1af0 [ 15.454549] x23: ffffa5a4d7d3ae40 x22: ffff1fb080160000 [ 15.460007] x21: ffffa5a4d7ca8998 x20: ffffa5a4d79b7000 [ 15.465463] x19: ffff1fb7aeba1a80 x18: 0000000000000000 [ 15.470920] x17: 0000000000000000 x16: 0000000000000000 [ 15.476377] x15: 0000000000000004 x14: 0000000000000000 [ 15.481833] x13: 0000000000000000 x12: ffff1fb080402c40 [ 15.487290] x11: ffff1fb080402b58 x10: 0000000000000a80 [ 15.492747] x9 : ffff8000100ebd40 x8 : ffff1fb080160000 [ 15.498204] x7 : ffff000000000000 x6 : 0000000055555556 [ 15.503666] x5 : 0000000000000001 x4 : fffffe7ec207b0a0 [ 15.509122] x3 : 000000008015000f x2 : ffff1fb08054d830 [ 15.514579] x1 : a21a38df0f0a9b2a x0 : ffff1fb08054d830 [ 15.520036] Call trace: [ 15.522541] 0x1a38df0f0a9b2a [ 15.525584] rcu_core_si+0x18/0x20 [ 15.529085] __do_softirq+0x140/0x3e8 [ 15.532846] run_ksoftirqd+0x50/0x60 [ 15.536517] smpboot_thread_fn+0x1c4/0x280 [ 15.540732] kthread+0x148/0x170 [ 15.544055] ret_from_fork+0x10/0x24 [ 15.547734] Code: bad PC value [ 15.550888] ---[ end trace 872edc7d9fbcab0a ]--- [ 15.555633] Kernel panic - not syncing: SP/PC alignment exception: Fatal exception in interrupt [ 15.564577] SMP: stopping secondary CPUs [ 15.568882] Kernel Offset: 0x25a4c5fa0000 from 0xffff800010000000 [ 15.575142] PHYS_OFFSET: 0xffffe05080000000 [ 15.579434] CPU features: 0x0040006,4a80aa38 [ 15.583820] Memory Limit: none [ 15.586950] ---[ end Kernel panic - not syncing: SP/PC alignment exception: Fatal exception in interrupt ]--- ÿâ [0000.061] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0000.067] I> t234-A01-0-Silicon (0x12347) Prod [0000.071] I> Boot-mode : Coldboot [0000.074] I> Emulation: [0000.077] I> Entry timestamp: 0x00000000 [0000.080] I> last_boot_error: 0x0 [0000.083] I> BR-BCT: preprod_dev_sign: 0 [0000.087] I> rst_source: 0x2, rst_level: 0x1 [0000.091] I> Task: Bootchain select WAR set (0x5000c741) [0000.096] I> Active chain: 0 [0000.099] I> Task: CRC check (0x5001dab5) [0000.103] I> Skip CRC check as records_integrity fuse is not burned [0000.109] I> Task: Initialize MB2 params (0x5000d78d) [0000.114] I> MB2-params @ 0x40060000 [0000.118] I> Task: Crypto init (0x5001cb8d) [0000.122] I> Task: Secure debug controls (0x5000cd21) [0000.127] I> Task: strap war set (0x5000c70d) [0000.131] I> strap value(0x4000001) set to 0x4000001 [0000.136] I> Task: Initialize SOC Therm (0x5001af85) [0000.141] I> Task: Program NV master stream id (0x5000ccd5) [0000.146] I> Task: Verify boot mode (0xd482021) [0000.152] I> Task: Alias fuses (0x500109cd) [0000.157] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.164] I> Task: Print SKU type (0x5000fee1) [0000.168] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.173] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.178] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.182] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.186] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.190] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.195] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.199] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.203] I> FUSE_SKU_INFO_0 = 0xd0 [0000.206] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.210] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.214] I> SKU: Prod [0000.216] I> Task: Boost clocks (0x5001462d) [0000.220] I> Initializing PLLC2 for AXI_CBB. [0000.224] I> AXI_CBB : src = 35, divisor = 0 [0000.228] I> Task: Voltage monitor (0x50014639) [0000.233] I> VMON: Vmon re-calibration and fine tuning done [0000.238] I> Task: UPHY init (0x5000dced) [0000.243] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.248] I> Task: Boot device init (0x50000b39) [0000.253] I> Boot_device: QSPI_FLASH instance: 0 [0000.257] I> Qspi clock source : pllc_out0 [0000.261] I> QSPI Flash: Macronix 64MB [0000.265] I> QSPI-0l initialized successfully [0000.269] I> Task: TSC init (0x5001fa6d) [0000.273] I> Task: Load membct (0x50011fb9) [0000.277] I> RAM_CODE 0x4000001 [0000.280] I> Loading MEMBCT [0000.283] I> Active chain: 0 [0000.286] I> Slot: 0 [0000.288] I> Binary[0] block-0 (partition size: 0x40000) [0000.293] I> get_binary_info: Binary name: MEM-BCT-0 [0000.298] I> Size of crypto header is 8192 [0000.302] I> BCH load address is : 0x40050000 [0000.306] I> Size of crypto header is 8192 [0000.310] I> BCH of MEM-BCT-0 read from storage [0000.314] I> BCH address is : 0x40050000 [0000.318] I> MEM-BCT-0 header integrity check is success [0000.324] I> Binary magic in BCH component 0 is MEM0 [0000.328] I> component binary type is 0 [0000.333] I> MEM-BCT-0 binary is read from storage [0000.338] I> MEM-BCT-0 binary integrity check is success [0000.343] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.349] I> RAM_CODE 0x4000001 [0000.355] I> RAM_CODE 0x4000001 [0000.358] I> Task: Load Page retirement list (0x50011601) [0000.364] I> Task: SDRAM params override (0x50011f95) [0000.369] I> Task: Save mem-bct info (0x500147fd) [0000.373] I> Task: Carveout allocate (0x50014861) [0000.378] I> RCM blob carveout will not be allocated [0000.382] I> ECC region[0]: Start:0x0, End:0x0 [0000.387] I> ECC region[1]: Start:0x0, End:0x0 [0000.391] I> ECC region[2]: Start:0x0, End:0x0 [0000.395] I> ECC region[3]: Start:0x0, End:0x0 [0000.400] I> ECC region[4]: Start:0x0, End:0x0 [0000.404] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.410] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.414] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.419] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.424] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.433] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.440] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.448] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0000.455] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0000.462] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.469] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.476] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.483] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.490] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0000.497] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0000.504] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.511] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0000.518] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0000.525] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0000.532] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0000.539] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0000.545] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0000.552] I> allocated(CO:01) base:0x832100000 size:0x100000 align: 0x100000 [0000.559] I> allocated(CO:04) base:0x832000000 size:0x100000 align: 0x100000 [0000.566] I> allocated(CO:05) base:0x82f700000 size:0x100000 align: 0x100000 [0000.573] I> allocated(CO:08) base:0x82f600000 size:0x100000 align: 0x100000 [0000.580] I> allocated(CO:09) base:0x82f500000 size:0x100000 align: 0x100000 [0000.587] I> allocated(CO:15) base:0x82f400000 size:0x100000 align: 0x100000 [0000.594] I> allocated(CO:17) base:0x82f300000 size:0x100000 align: 0x100000 [0000.601] I> allocated(CO:23) base:0x82f200000 size:0x100000 align: 0x100000 [0000.608] I> allocated(CO:27) base:0x82f100000 size:0x100000 align: 0x100000 [0000.615] I> allocated(CO:42) base:0x82f000000 size:0x100000 align: 0x100000 [0000.622] I> allocated(CO:54) base:0x82ef80000 size:0x80000 align: 0x80000 [0000.628] I> allocated(CO:34) base:0x82ef70000 size:0x10000 align: 0x10000 [0000.635] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0000.642] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0000.649] I> allocated(CO:48) base:0x82ef50000 size:0x20000 align: 0x10000 [0000.656] I> allocated(CO:69) base:0x82ef30000 size:0x20000 align: 0x10000 [0000.662] I> allocated(CO:49) base:0x82ef20000 size:0x10000 align: 0x10000 [0000.669] I> allocated(CO:50) base:0x82ef10000 size:0x10000 align: 0x10000 [0000.676] I> allocated(CO:52) base:0x82ef00000 size:0x10000 align: 0x10000 [0000.683] I> NSDRAM base: 0x80000000, end: 0x82ef70000 [0000.688] I> Task: Thermal check (0x500208f9) [0000.692] I> max_chip_limit = 105 [0000.695] I> min_chip_limit = -28 [0000.698] I> max temp read = 29 [0000.701] I> min temp read = 28 [0000.704] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0000.710] I> Task: Enable WDT 5th expiry (0x50020699) [0000.715] I> Task: I2C register (0x50000ad9) [0000.719] I> Task: Reset FSI (0x50014635) [0000.723] I> Task: Pinmux init (0x500137bd) [0000.728] I> Task: Prod config init (0x50013c09) [0000.732] I> Task: Pad voltage init (0x50013859) [0000.737] I> Task: Prod init (0x50013c4d) [0000.741] I> Task: Common rail init (0x50014305) [0000.746] W> PMIC_CONFIG: Rail: Thermal config not found in MB1 BCT. [0000.752] I> DONE: Thermal config [0000.756] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.764] I> DONE: SOC rail config [0000.768] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.774] I> DONE: MEMIO rail config [0000.778] I> DONE: GPU rail info [0000.781] I> DONE: CV rail info [0000.784] I> Task: Mem clock src (0x50011de5) [0000.788] I> Task: Misc. board config (0x500143ad) [0000.793] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.798] I> Task: SDRAM init (0x50011de9) [0000.805] I> SDRAM-params @ 0xd485000 [0000.808] I> MSS code-drop: NvBootSdramInit [0000.812] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.820] I> MSS CAR: Init PLLM [0000.823] I> MSS CAR: Init PLLHUB [0000.828] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.839] I> mb1_sdram_init Done ! [0000.842] I> SDRAM Size in Total 0x800000000 [0000.847] I> Task: Dram Ecc scrub (0x50011729) [0000.851] I> Task: DRAM alias check (0x50011f8d) [0000.882] I> Task: Program NSDRAM carveout (0x50015171) [0000.889] I> NSDRAM carveout encryption is enabled [0000.894] I> Program NSDRAM carveout [0000.898] I> Task: Register checker (0x50011f91) [0000.907] I> Task: Enable clock-mon (0x5001fa5d) [0000.923] I> FMON: Fmon re-programming done [0000.928] I> Task: Mapper init (0x5001dfed) [0000.933] I> Task: SC7 Context Init (0x5001fd5d) [0000.939] I> Task: CCPLEX IST init (0x5000d561) [0000.945] I> Task: CPU WP0 (0x5000c7a9) [0000.951] I> Loading MCE [0000.953] I> Active chain: 0 [0000.956] I> Slot: 0 [0000.959] I> Binary[8] block-0 (partition size: 0x80000) [0000.965] I> get_binary_info: Binary name: MCE [0000.969] I> Size of crypto header is 8192 [0000.974] I> BCH load address is : 0x4003e000 [0000.979] I> Size of crypto header is 8192 [0000.984] I> BCH of MCE read from storage [0000.988] I> BCH address is : 0x4003e000 [0000.994] I> MCE header integrity check is success [0000.999] I> Binary magic in BCH component 0 is MTSM [0001.004] I> component binary type is 8 [0001.008] I> Size of crypto header is 8192 [0001.015] I> MCE binary is read from storage [0001.020] I> MCE binary integrity check is success [0001.025] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.033] I> Size of crypto header is 8192 [0001.048] I> Size of crypto header is 8192 [0001.053] I> Sending WP0 mailbox command to PSC [0001.064] I> Task: XUSB Powergate (0x50000ae5) [0001.070] I> Skipping powergate XUSB. [0001.074] I> Task: MB1 fixed firewalls (0x5001f0d9) [0001.094] I> Task: Load bpmp-fw (0x5001f41d) [0001.099] I> Active chain: 0 [0001.102] I> Slot: 0 [0001.105] I> Binary[15] block-0 (partition size: 0x180000) [0001.111] I> get_binary_info: Binary name: BPMP_FW [0001.116] I> Size of crypto header is 8192 [0001.121] I> BCH load address is : 0x807fe000 [0001.126] I> Size of crypto header is 8192 [0001.131] I> BCH of BPMP_FW read from storage [0001.136] I> BCH address is : 0x807fe000 [0001.141] I> BPMP_FW header integrity check is success [0001.147] I> Binary magic in BCH component 0 is BPMF [0001.152] I> component binary type is 15 [0001.156] I> Size of crypto header is 8192 [0001.171] I> BPMP_FW binary is read from storage [0001.179] I> BPMP_FW binary integrity check is success [0001.184] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0001.192] I> Active chain: 0 [0001.195] I> Slot: 0 [0001.198] I> Binary[16] block-10000 (partition size: 0x400000) [0001.205] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.210] I> Size of crypto header is 8192 [0001.215] I> BCH load address is : 0x807fc000 [0001.220] I> Size of crypto header is 8192 [0001.225] I> BCH of BPMP_FW_DTB read from storage [0001.230] I> BCH address is : 0x807fc000 [0001.236] I> BPMP_FW_DTB header integrity check is success [0001.241] I> Binary magic in BCH component 0 is BPMD [0001.247] I> component binary type is 16 [0001.251] I> Size of crypto header is 8192 [0001.257] I> BPMP_FW_DTB binary is read from storage [0001.263] I> BPMP_FW_DTB binary integrity check is success [0001.269] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20480) [0001.278] I> Task: Load psc-fw (0x5001f5a5) [0001.284] I> Active chain: 0 [0001.287] I> Slot: 0 [0001.289] I> Binary[17] block-0 (partition size: 0xc0000) [0001.295] I> get_binary_info: Binary name: PSC_FW [0001.300] I> Size of crypto header is 8192 [0001.305] I> BCH load address is : 0x80ffe000 [0001.310] I> Size of crypto header is 8192 [0001.315] I> BCH of PSC_FW read from storage [0001.320] I> BCH address is : 0x80ffe000 [0001.325] I> PSC_FW header integrity check is success [0001.331] I> Binary magic in BCH component 0 is PFWP [0001.336] I> component binary type is 17 [0001.340] I> Size of crypto header is 8192 [0001.349] I> PSC_FW binary is read from storage [0001.355] I> PSC_FW binary integrity check is success [0001.360] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.368] I> Task: Load nvdec-fw (0x5001f619) [0001.374] I> Active chain: 0 [0001.377] I> Slot: 0 [0001.380] I> Binary[7] block-0 (partition size: 0x100000) [0001.386] I> get_binary_info: Binary name: NVDEC [0001.391] I> Size of crypto header is 8192 [0001.395] I> BCH load address is : 0x800fe000 [0001.401] I> Size of crypto header is 8192 [0001.406] I> BCH of NVDEC read from storage [0001.410] I> BCH address is : 0x800fe000 [0001.416] I> NVDEC header integrity check is success [0001.421] I> Binary magic in BCH component 0 is NDEC [0001.426] I> component binary type is 7 [0001.430] I> Size of crypto header is 8192 [0001.438] I> NVDEC binary is read from storage [0001.444] I> NVDEC binary integrity check is success [0001.449] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.460] I> Task: Load tsec-fw (0x5001f9a5) [0001.465] I> TSEC-FW load support not enabled [0001.470] I> Task: GPIO interrupt map (0x50014541) [0001.476] I> Task: SC7 context save (0x5001fe9d) [0001.482] I> NV_SC7 Context addr: 0xa0000000 [0001.487] I> Active chain: 0 [0001.490] I> Slot: 0 [0001.493] I> Binary[27] block-0 (partition size: 0x100000) [0001.499] I> get_binary_info: Binary name: BR_BCT [0001.504] I> Size of crypto header is 8192 [0001.509] I> Size of crypto header is 8192 [0001.514] I> BR_BCT binary is read from storage [0001.519] I> BR_BCT binary integrity check is success [0001.524] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.532] I> Active chain: 0 [0001.535] I> Slot: 0 [0001.538] I> Binary[13] block-0 (partition size: 0x30000) [0001.544] I> get_binary_info: Binary name: SC7-FW [0001.549] I> Size of crypto header is 8192 [0001.553] I> Size of crypto header is 8192 [0001.558] I> BCH load address is : 0xa0002000 [0001.563] I> Size of crypto header is 8192 [0001.568] I> BCH of SC7-FW read from storage [0001.573] I> BCH address is : 0xa0002000 [0001.578] I> SC7-FW header integrity check is success [0001.584] I> Binary magic in BCH component 0 is WB0B [0001.589] I> component binary type is 13 [0001.593] I> Size of crypto header is 8192 [0001.600] I> SC7-FW binary is read from storage [0001.605] I> SC7-FW binary integrity check is success [0001.611] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26220) [0001.619] I> Active chain: 0 [0001.622] I> Slot: 0 [0001.624] I> Binary[22] block-0 (partition size: 0x30000) [0001.630] I> get_binary_info: Binary name: PSC_RF [0001.635] I> Size of crypto header is 8192 [0001.640] I> Size of crypto header is 8192 [0001.644] I> BCH load address is : 0xa002a220 [0001.650] I> Size of crypto header is 8192 [0001.655] I> BCH of PSC_RF read from storage [0001.659] I> BCH address is : 0xa002a220 [0001.665] I> PSC_RF header integrity check is success [0001.670] I> Binary magic in BCH component 0 is PSCR [0001.676] I> component binary type is 22 [0001.680] I> Size of crypto header is 8192 [0001.686] I> PSC_RF binary is read from storage [0001.691] I> PSC_RF binary integrity check is success [0001.697] I> Binary PSC_RF loaded successfully at 0xa002c220 (0x1b000) [0001.719] I> Active chain: 0 [0001.722] I> Slot: 0 [0001.724] I> Binary[14] block-0 (partition size: 0x20000) [0001.730] I> get_binary_info: Binary name: MB2_RF [0001.736] I> Size of crypto header is 8192 [0001.740] I> Size of crypto header is 8192 [0001.745] I> BCH load address is : 0xa008ea48 [0001.750] I> Size of crypto header is 8192 [0001.755] I> BCH of MB2_RF read from storage [0001.760] I> BCH address is : 0xa008ea48 [0001.765] I> MB2_RF header integrity check is success [0001.771] I> Binary magic in BCH component 0 is MB2R [0001.776] I> component binary type is 14 [0001.780] I> Size of crypto header is 8192 [0001.786] I> MB2_RF binary is read from storage [0001.792] I> MB2_RF binary integrity check is success [0001.797] I> Binary MB2_RF loaded successfully at 0xa0090a48 (0x1bfa0) [0001.806] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.814] I> SC7 context fuse-bypass data is empty [0001.821] I> SC7 context save done [0001.825] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0001.831] I> Loading MB2 [0001.834] I> Active chain: 0 [0001.838] I> Slot: 0 [0001.840] I> Binary[6] block-0 (partition size: 0x80000) [0001.846] I> get_binary_info: Binary name: MB2 [0001.851] I> Size of crypto header is 8192 [0001.855] I> BCH load address is : 0x8007e000 [0001.861] I> Size of crypto header is 8192 [0001.866] I> BCH of MB2 read from storage [0001.870] I> BCH address is : 0x8007e000 [0001.876] I> MB2 header integrity check is success [0001.881] I> Binary magic in BCH component 0 is MB2B [0001.886] I> component binary type is 6 [0001.890] I> Size of crypto header is 8192 [0001.899] I> MB2 binary is read from storage [0001.905] I> MB2 binary integrity check is success [0001.910] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0001.918] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0001.925] I> Task: Prepare MB2 params (0x5000d8f1) [0001.934] I> BR-BCT Boot Chain Fields [0001.937] I> u32_non_gpio_select_boot_chain : 0 [0001.942] I> u32_num_boot_chains : 2 [0001.948] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.953] I> Task: Program misc carveouts (0x50014bcd) [0001.960] I> Program IPC carveouts [0001.967] I> Task: Dram ecc test (0x500117a5) [0001.972] I> Task: Misc NV security settings (0x5000d0f9) [0001.979] I> NVDEC sticky bits programming done [0001.984] I> Successfully powergated NVDEC [0001.988] I> Task: Disable/Reload WDT (0x500206e1) [0001.994] I> Programmed SLCG global override := 0x0 [0002.000] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f1e8b I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x830000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x500186cc) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 14 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82f600000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82f300000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x83a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9507824 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x83a000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50015ae4) I> Task: Enable FSI VMON (0x5001566c) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x500156c4) I> FSITHERM max temp = 29 I> FSITHERM min temp = 28 I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x836000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: FSI padctl context save (0x5001885c) I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ÿáI> Received ACK from psc I> Task: ÿçINFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ÿâ bpmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5 is 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ÿáStart secure NOR provision (0x50018af8) I> Task: Load FSI keyblob (0x500160b4) I> Skipping FSI key blob copy I> Task: Unhalt AUÿâinitialized avfs_clk_platform initialized powergate ÿáXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalÿâinitialized dvs ÿát sÿâinitialized clk_mach_config initialized pm suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ÿå[ 2.477407] Camera-FW on t234-rce-safe started TCU early console enabled. ÿáuccessful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bootloader ÿè ÿáI> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader ÿâinitialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq ÿáI> Scratch RSV109: 0x00000001 active chain: 0 ÿâmissing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ÿáI> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binaryÿâinitialized clk_cal_late initialized noc_late initialized cvc ÿá cpubl loaded successfully at 0x82eaÿâinitialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized regulator_post ÿå[ 2.650827] Camera-FW on t234-rce-safe ready SHA1=10150ec0 (crt 12.945 ms,ÿâinitialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ÿå total boot 187.425 ms) ÿá00000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x83fdfe000 I> Relocating OP-TEE dtb from: 0x83feff770 to 0x82ef30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x7aef70000 I> [1] START: 0x836000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x830000400 I> EKB detected (length: 0x410) @ VA:0x830000400 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82ef30000 I> Task: OEM SC7 context save (0x50018958) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> Task: Bootchain failure check (0x5000242c) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ÿäNOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TC:ÿèDCE: FW Boot Done ÿä I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ÿá Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) [=3h Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 15:09:44 PST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x808260518 SMBIOS=0xffff0000 SMBIOS 3.0=0x806be0000 MEMATTR=0x807610018 ESRT=0x806a5d118 RNG=0x82a9ff398 MEMRESERVE=0x807611f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000000806a5d118 to 0x0000000806a5d150. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000081a800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000837ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000803ffffff] [ 0.000000] node 0: [mem 0x0000000804000000-0x00000008061bffff] [ 0.000000] node 0: [mem 0x00000008061c0000-0x000000080653dfff] [ 0.000000] node 0: [mem 0x000000080653e000-0x00000008066d1fff] [ 0.000000] node 0: [mem 0x00000008066d2000-0x0000000806bcffff] [ 0.000000] node 0: [mem 0x0000000806bd0000-0x0000000806beffff] [ 0.000000] node 0: [mem 0x0000000806bf0000-0x0000000806dfffff] [ 0.000000] node 0: [mem 0x0000000806e00000-0x0000000806e4ffff] [ 0.000000] node 0: [mem 0x0000000806e50000-0x000000080751ffff] [ 0.000000] node 0: [mem 0x0000000807520000-0x000000080756ffff] [ 0.000000] node 0: [mem 0x0000000807570000-0x00000008075dffff] [ 0.000000] node 0: [mem 0x00000008075e0000-0x00000008075fffff] [ 0.000000] node 0: [mem 0x0000000807600000-0x000000080761ffff] [ 0.000000] node 0: [mem 0x0000000807620000-0x000000080763ffff] [ 0.000000] node 0: [mem 0x0000000807640000-0x000000080775ffff] [ 0.000000] node 0: [mem 0x0000000807760000-0x000000080793ffff] [ 0.000000] node 0: [mem 0x0000000807940000-0x000000080798ffff] [ 0.000000] node 0: [mem 0x0000000807990000-0x0000000807acffff] [ 0.000000] node 0: [mem 0x0000000807ad0000-0x0000000807b9ffff] [ 0.000000] node 0: [mem 0x0000000807ba0000-0x0000000807d7ffff] [ 0.000000] node 0: [mem 0x0000000807d80000-0x0000000807d9ffff] [ 0.000000] node 0: [mem 0x0000000807da0000-0x0000000807daffff] [ 0.000000] node 0: [mem 0x0000000807db0000-0x000000080838ffff] [ 0.000000] node 0: [mem 0x0000000808390000-0x000000080842ffff] [ 0.000000] node 0: [mem 0x0000000808430000-0x000000080852ffff] [ 0.000000] node 0: [mem 0x0000000808530000-0x00000008085cffff] [ 0.000000] node 0: [mem 0x00000008085d0000-0x00000008086cffff] [ 0.000000] node 0: [mem 0x00000008086d0000-0x000000080876ffff] [ 0.000000] node 0: [mem 0x0000000808770000-0x000000080903ffff] [ 0.000000] node 0: [mem 0x0000000809040000-0x000000080921ffff] [ 0.000000] node 0: [mem 0x0000000809220000-0x000000082a9affff] [ 0.000000] node 0: [mem 0x000000082a9b0000-0x000000082a9fffff] [ 0.000000] node 0: [mem 0x000000082aa00000-0x000000082e7fffff] [ 0.000000] node 0: [mem 0x000000082ea00000-0x000000082eefffff] [ 0.000000] node 0: [mem 0x0000000836000000-0x0000000837ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000837ffffff] [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7937792 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 31048500K/32257024K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 946380K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000774] Console: colour dummy device 80x25 [ 0.000961] printk: console [tty0] enabled [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001012] pid_max: default: 32768 minimum: 301 [ 0.001076] LSM: Security Framework initializing [ 0.001099] Yama: becoming mindful. [ 0.001118] SELinux: Initializing. [ 0.001205] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001256] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003313] rcu: Hierarchical SRCU implementation. [ 0.003416] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.004166] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.004177] DTB Build time: Jan 24 2023 15:26:09 [ 0.005612] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.005731] Remapping and enabling EFI services. [ 0.006946] smp: Bringing up secondary CPUs ... [ 0.035658] Detected PIPT I-cache on CPU1 [ 0.035695] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035728] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.064383] Detected PIPT I-cache on CPU2 [ 0.064393] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.064408] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.092999] Detected PIPT I-cache on CPU3 [ 0.093008] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.093021] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.123680] Detected PIPT I-cache on CPU4 [ 0.123703] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123729] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.152383] Detected PIPT I-cache on CPU5 [ 0.152392] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.152408] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.181028] Detected PIPT I-cache on CPU6 [ 0.181038] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.181052] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.209671] Detected PIPT I-cache on CPU7 [ 0.209681] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.209697] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.240356] Detected PIPT I-cache on CPU8 [ 0.240380] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.240409] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.269052] Detected PIPT I-cache on CPU9 [ 0.269064] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.269080] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.298307] Detected PIPT I-cache on CPU10 [ 0.298318] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.298332] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.327558] Detected PIPT I-cache on CPU11 [ 0.327568] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.327582] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.327636] smp: Brought up 1 node, 12 CPUs [ 0.327720] SMP: Total of 12 processors activated. [ 0.327725] CPU features: detected: Privileged Access Never [ 0.327728] CPU features: detected: LSE atomic instructions [ 0.327731] CPU features: detected: User Access Override [ 0.327734] CPU features: detected: 32-bit EL0 Support [ 0.327737] CPU features: detected: Common not Private translations [ 0.327740] CPU features: detected: RAS Extension Support [ 0.327744] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.327748] CPU features: detected: CRC32 instructions [ 0.327751] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.363647] CPU: All CPU(s) started at EL2 [ 0.366151] devtmpfs: initialized [ 0.383790] Registered cp15_barrier emulation handler [ 0.383803] Registered setend emulation handler [ 0.383809] KASLR enabled [ 0.383924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.383938] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.385576] pinctrl core: initialized pinctrl subsystem [ 0.386135] SMBIOS 3.0.0 present. [ 0.386144] DMI: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 0.386421] NET: Registered protocol family 16 [ 0.387266] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.387470] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.387670] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.387698] audit: initializing netlink subsys (disabled) [ 0.387785] audit: type=2000 audit(0.384:1): state=initialized audit_enabled=0 res=1 [ 0.387952] thermal_sys: Registered thermal governor 'step_wise' [ 0.387954] thermal_sys: Registered thermal governor 'power_allocator' [ 0.387959] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.390311] cpuidle: using governor menu [ 0.390416] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.390536] ASID allocator initialised with 32768 entries [ 0.390627] Serial: AMBA PL011 UART driver [ 0.392496] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.392521] Tegra reboot handler registered. [ 0.411021] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.411037] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.411044] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.411054] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.411060] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.411067] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.411075] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.411083] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.411089] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.411095] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.411101] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.411108] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.411114] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.411121] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.411127] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.411133] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.411141] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.411151] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.411182] mc-err: mcerr ops are set to t23x [ 0.411859] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 67, base_baud = 0) is a SBSA [ 1.669001] printk: console [ttyAMA0] enabled [ 1.677424] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.684133] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.690833] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.697532] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.706268] ACPI: Interpreter disabled. [ 1.711240] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.716102] vbusA-cvb: supplied by vdd-5v-sys [ 1.720589] vbusB-cvb: supplied by vdd-5v-sys [ 1.725068] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.729981] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.735057] iommu: Default domain type: Translated [ 1.739975] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.746235] SCSI subsystem initialized [ 1.750046] usbcore: registered new interface driver usbfs [ 1.755543] usbcore: registered new interface driver hub [ 1.760869] usbcore: registered new device driver usb [ 1.766097] mc: Linux media interface: v0.10 [ 1.770376] videodev: Linux video capture interface: v2.00 [ 1.775995] pps_core: LinuxPPS API ver. 1 registered [ 1.780958] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.790096] PTP clock support registered [ 1.794211] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.801366] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.809009] Registered efivars operations [ 1.813160] FPGA manager framework [ 1.816599] Advanced Linux Sound Architecture Driver Initialized. [ 1.822954] Bluetooth: Core ver 2.22 [ 1.826535] NET: Registered protocol family 31 [ 1.830979] Bluetooth: HCI device and connection manager initialized [ 1.837337] Bluetooth: HCI socket layer initialized [ 1.842215] Bluetooth: L2CAP socket layer initialized [ 1.847270] Bluetooth: SCO socket layer initialized [ 1.852609] camchar: rtcpu character device driver loaded [ 1.858238] clocksource: Switched to clocksource arch_sys_counter [ 2.017258] VFS: Disk quotas dquot_6.6.0 [ 2.021227] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.028243] pnp: PnP ACPI: disabled [ 2.033552] la/ptsa driver initialized. [ 2.037444] NET: Registered protocol family 2 [ 2.042000] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.051742] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.060488] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.068788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.076688] TCP: Hash tables configured (established 262144 bind 65536) [ 2.083411] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.090344] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.097800] NET: Registered protocol family 1 [ 2.102402] RPC: Registered named UNIX socket transport module. [ 2.108329] RPC: Registered udp transport module. [ 2.113030] RPC: Registered tcp transport module. [ 2.117730] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.124179] PCI: CLS 0 bytes, default 64 [ 2.128233] Trying to unpack rootfs image as initramfs... [ 2.244216] Freeing initrd memory: 8208K [ 2.250537] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.258486] kvm [1]: IPA Size Limit: 48 bits [ 2.262927] kvm [1]: VHE mode initialized successfully [ 2.268778] Initialise system trusted keyrings [ 2.273304] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.281916] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.288031] NFS: Registering the id_resolver key type [ 2.293098] Key type id_resolver registered [ 2.297277] Key type id_legacy registered [ 2.301318] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.308026] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.315434] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.331127] NET: Registered protocol family 38 [ 2.335575] Key type asymmetric registered [ 2.339669] Asymmetric key parser 'x509' registered [ 2.344563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.352016] io scheduler mq-deadline registered [ 2.356546] io scheduler kyber registered [ 2.364481] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.370087] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.375674] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.381259] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.389305] tegra_dc_assign_hw_data: no matching compatible node [ 2.395319] tegradccommon module_init failed [ 2.399587] tegradc module_init failed [ 2.403576] EINJ: ACPI disabled. [ 2.408353] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.415240] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 2.420465] tegra-pmc: ### PMC reset level: L1 [ 2.424905] tegra-pmc: ### PMC reset status reg: 0x9 [ 2.431117] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.452070] random: fast init done [ 2.454609] printk: console [ttyTCU0] enabled [ 4.087892] arm-smmu 12000000.iommu: probing hardware configuration... [ 4.095887] arm-smmu 12000000.iommu: SMMUv2 with: [ 4.100725] arm-smmu 12000000.iommu: stage 1 translation [ 4.106271] arm-smmu 12000000.iommu: stage 2 translation [ 4.111810] arm-smmu 12000000.iommu: nested translation [ 4.117263] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.124667] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.133582] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.140280] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.146963] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.154439] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.161129] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.165953] arm-smmu 10000000.iommu: stage 1 translation [ 4.171488] arm-smmu 10000000.iommu: stage 2 translation [ 4.177024] arm-smmu 10000000.iommu: nested translation [ 4.182472] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.189874] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.198707] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.205397] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.212085] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.219206] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.225804] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.230533] arm-smmu 8000000.iommu: stage 1 translation [ 4.235981] arm-smmu 8000000.iommu: stage 2 translation [ 4.241437] arm-smmu 8000000.iommu: nested translation [ 4.246793] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.254111] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.262882] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.269485] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.276095] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.283341] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.293702] tegra_profiler: version: 1.150, samples/io: 50/29 [ 4.299694] tegra_profiler: auth: init [ 4.303798] nvsciipc: loaded module [ 4.308852] tun: Universal TUN/TAP device driver, 1.6 [ 4.314484] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.321892] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.327370] e1000e: Intel(R) PRO/1000 Network Driver [ 4.332456] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.338546] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.344071] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.349918] PPP generic driver version 2.4.2 [ 4.354340] PPP BSD Compression module registered [ 4.359159] PPP Deflate Compression module registered [ 4.364356] PPP MPPE Compression module registered [ 4.369298] usbcore: registered new interface driver r8152 [ 4.374934] usbcore: registered new interface driver asix [ 4.380490] usbcore: registered new interface driver ax88179_178a [ 4.386745] usbcore: registered new interface driver cdc_ether [ 4.392741] usbcore: registered new interface driver net1080 [ 4.398557] usbcore: registered new interface driver cdc_subset [ 4.404638] usbcore: registered new interface driver zaurus [ 4.410366] usbcore: registered new interface driver cdc_ncm [ 4.416183] usbcore: registered new interface driver aqc111 [ 4.422003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.428357] ohci-pci: OHCI PCI platform driver [ 4.432925] ohci-platform: OHCI generic platform driver [ 4.438579] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.445017] usbcore: registered new interface driver uas [ 4.450492] usbcore: registered new interface driver usb-storage [ 4.456792] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.462894] mousedev: PS/2 mouse device common for all mice [ 4.468627] usbcore: registered new interface driver xpad [ 4.476013] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.481475] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:31 UTC (31) [ 4.489692] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.496108] i2c /dev entries driver [ 4.499872] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.505797] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.511494] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.517171] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.522855] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.528524] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.534203] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.539884] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.547765] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.556340] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.565781] device-mapper: uevent: version 1.0.3 [ 4.570620] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.580451] sdhci: Secure Digital Host Controller Interface driver [ 4.586799] sdhci: Copyright(c) Pierre Ossman [ 4.591264] Synopsys Designware Multimedia Card Interface Driver [ 4.597487] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.603453] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 4.603765] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.603860] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 4.623022] tegra-bpmp bpmp: firmware: 9a7bb16aee9be45a56e6-ccd7dae126b [ 4.630977] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.636599] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.649010] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.654929] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ÿâdebugfs initialized ÿá[ 5.865024] hid: raw HID events driver (C) Jiri Kosina [ 5.871303] usbcore: registered new interface driver usbhid [ 5.877062] usbhid: USB HID core driver [ 5.882334] tegra-dce d800000.dce: Adding to iommu group 5 [ 5.889073] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 5.897889] tegra234-aon c000000.aon: Adding to iommu group 6 [ 5.904422] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.910901] c000000.aon:hsp: probed [ 5.913464] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 5.925907] tegra234-aon c000000.aon: init done [ 5.926347] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 5.930597] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.936831] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.943941] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.950092] tegra23x-psc e860000.psc: init done [ 5.958886] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.958889] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.958905] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.963815] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 5.971962] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.981681] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.990031] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 6.002828] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 6.003776] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 6.003778] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.003798] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 6.012169] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.021528] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 6.030521] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.084169] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.095968] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 6.108522] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 6.121336] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.133342] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (117) [ 6.140143] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.148410] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=10150ec03f8849d1537396903b70d4a48a255aba [ 6.161804] t19x_cache tegra-cache: probed [ 6.166216] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.181344] optee: probing for conduit method. [ 6.185937] optee: revision 3.19 (18d0f61b) [ 6.186723] optee: dynamic shared memory is enabled [ 6.196160] optee: initialized driver [ 6.213235] nvpmodel: initialized successfully [ 6.217904] tegra_hv: get_hvd: not initialized yet [ 6.222847] user_ivc_mempool: hypervisor not present [ 6.228724] usbcore: registered new interface driver snd-usb-audio [ 6.235916] u32 classifier [ 6.238704] input device check on [ 6.242468] Actions configured [ 6.246131] Initializing XFRM netlink socket [ 6.250980] NET: Registered protocol family 10 [ 6.256892] Segment Routing with IPv6 [ 6.260720] NET: Registered protocol family 17 [ 6.265309] NET: Registered protocol family 15 [ 6.270202] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.284014] Bluetooth: RFCOMM socket layer initialized [ 6.289386] Bluetooth: RFCOMM ver 1.11 [ 6.293269] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.299388] Bluetooth: HIDP socket layer initialized [ 6.305440] 9pnet: Installing 9P2000 support [ 6.309902] Key type dns_resolver registered [ 6.315363] registered taskstats version 1 [ 6.319598] Loading compiled-in X.509 certificates [ 6.329917] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 6.340586] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 6.353257] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.360447] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 6.373133] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.380165] tegra194-pcie 141a0000.pcie: Adding to iommu group 11 [ 6.392196] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.424747] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.435669] host1x 13e40000.host1x: Adding to iommu group 13 [ 7.453289] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 7.472138] host1x 13e40000.host1x: initialized [ 7.477190] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 7.485349] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 7.497408] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 7.505528] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.517521] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 7.525610] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.537616] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 7.545707] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.557707] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 7.565827] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.577810] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 7.585897] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.597904] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 7.606017] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.618006] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 7.626127] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.638122] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 7.646239] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.658239] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 7.666391] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.678391] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 7.686499] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.698520] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 7.706650] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.718625] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 7.726703] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.738695] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 7.746784] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.758721] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 7.766835] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.778845] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 7.786937] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.798963] falcon 15340000.vic: Adding to iommu group 30 [ 7.810172] falcon 15340000.vic: initialized [ 7.814859] falcon 15380000.nvjpg: Adding to iommu group 31 [ 7.824516] falcon 15380000.nvjpg: initialized [ 7.829233] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 7.839005] falcon 15540000.nvjpg1: initialized [ 7.843820] falcon 154c0000.nvenc: Adding to iommu group 33 [ 7.854801] falcon 154c0000.nvenc: initialized [ 7.859506] falcon 15a50000.ofa: Adding to iommu group 34 [ 7.868424] falcon 15a50000.ofa: initialized [ 7.872958] nvdec 15480000.nvdec: Adding to iommu group 35 [ 7.886122] nvdec 15480000.nvdec: initialized [ 7.890740] tsec 15500000.tsec: Adding to iommu group 36 [ 7.901398] tsec 15500000.tsec: initialized [ 7.908087] gic 2a41000.agic-controller: GIC IRQ controller registered [ 7.924921] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.940349] gpio-394 (camera-control-output-low): hogged as output/low [ 7.947099] gpio-397 (camera-control-output-low): hogged as output/low [ 7.953849] gpio-487 (camera-control-output-low): hogged as output/low [ 7.960605] gpio-486 (camera-control-output-low): hogged as output/low [ 7.968334] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 7.975570] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 7.982555] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 7.989075] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 7.995558] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 8.001802] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 8.009963] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 8.018503] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 8.028662] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 8.038282] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 8.044874] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 8.053355] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 8.061478] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 8.071442] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 8.078252] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 8.088207] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 8.095011] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 8.104944] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 8.111760] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 8.120547] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 8.131920] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 8.140641] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 8.152002] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 8.160727] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 8.172090] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 8.180804] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 8.192165] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 8.200897] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 8.212257] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 8.220977] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 8.232333] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 8.241032] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 8.252393] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 8.261136] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 8.272494] pva 16000000.pva0: Adding to iommu group 48 [ 8.298082] pva 16000000.pva0: initialized [ 8.310139] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 8.325965] nvdla 15880000.nvdla0: initialized [ 8.332222] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 8.347442] nvdla 158c0000.nvdla1: initialized [ 8.353671] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 8.360744] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 8.368287] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 8.374929] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 8.381680] serial-tegra 3100000.serial: Adding to iommu group 2 [ 8.388393] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 8.398172] serial-tegra 3110000.serial: Adding to iommu group 2 [ 8.404686] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 65, base_baud = 0) is a TEGRA_UART [ 8.414380] serial-tegra 3130000.serial: Adding to iommu group 2 [ 8.420893] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 66, base_baud = 0) is a TEGRA_UART [ 8.448905] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 8.458669] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.464255] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.472927] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 8.482544] tegra-xusb 3610000.xhci: irq 235, io mem 0x03610000 [ 8.489009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.497513] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.504952] usb usb1: Product: xHCI Host Controller [ 8.509971] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.516276] usb usb1: SerialNumber: 3610000.xhci [ 8.522143] hub 1-0:1.0: USB hub found [ 8.526057] hub 1-0:1.0: 4 ports detected [ 8.530536] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.536098] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.543889] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.551450] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.559963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.567394] usb usb2: Product: xHCI Host Controller [ 8.572412] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.578674] usb usb2: SerialNumber: 3610000.xhci [ 8.583959] hub 2-0:1.0: USB hub found [ 8.587838] hub 2-0:1.0: 4 ports detected [ 8.611540] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 8.634730] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz [ 8.648318] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2072000 KHz, changing to: 2112000 KHz [ 8.662181] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 1989000 KHz, changing to: 2035200 KHz [ 8.674810] tegra194-cpufreq e000000.ccplex: probed with ICC [ 8.682043] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 8.690578] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.691525] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 8.702711] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.706946] mmc0: CQHCI version 5.10 [ 8.711401] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.723794] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.740620] irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.747563] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.748291] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 8.806240] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 8.838237] tegra194-pcie 14100000.pcie: Link up [ 8.844052] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 8.850879] pci_bus 0001:00: root bus resource [bus 00-ff] [ 8.856521] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 8.866390] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 8.877227] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 8.885155] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 8.891488] pci 0001:00:00.0: PME# supported from D0 D3hot [ 8.901746] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 8.908107] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 8.914044] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 8.921809] mmc0: Command Queue Engine enabled [ 8.922553] pci 0001:01:00.0: supports D1 D2 [ 8.926380] mmc0: periodic cache flush enabled [ 8.930778] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.935344] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 8.946663] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 8.949223] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 8.956135] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 8.960856] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 8.967227] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 8.982729] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 8.989055] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 8.994455] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 9.000750] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 9.008135] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.008300] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 9.016893] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.025236] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.025238] usb 1-3: Product: Bluetooth Radio [ 9.025239] usb 1-3: Manufacturer: Realtek [ 9.025240] usb 1-3: SerialNumber: 00e04c000001 [ 9.055001] pcieport 0001:00:00.0: Adding to iommu group 9 [ 9.060932] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 9.067318] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 9.073995] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.081242] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 9.081688] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.094967] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.103674] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.103816] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 9.112369] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.158056] usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcdDevice= 1.40 [ 9.166477] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.173828] usb 2-3: Product: 4-Port USB 3.0 Hub [ 9.178574] usb 2-3: Manufacturer: Generic [ 9.195638] hub 2-3:1.0: USB hub found [ 9.201669] hub 2-3:1.0: 4 ports detected [ 9.274388] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 9.451823] usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcdDevice= 1.40 [ 9.460241] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.467583] usb 1-4: Product: 4-Port USB 2.0 Hub [ 9.472330] usb 1-4: Manufacturer: Generic [ 9.479284] hub 1-4:1.0: USB hub found [ 9.484598] hub 1-4:1.0: 4 ports detected [ 10.234549] tegra194-pcie 14160000.pcie: Phy link never came up [ 10.240702] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 10.247517] pci_bus 0004:00: root bus resource [bus 00-ff] [ 10.253153] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 10.263247] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.274084] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 10.281999] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.288329] pci 0004:00:00.0: PME# supported from D0 D3hot [ 10.301841] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 10.307243] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.316197] pcieport 0004:00:00.0: Adding to iommu group 10 [ 10.322170] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 10.328503] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 10.334508] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 10.340588] pci 0004:00:00.0: Removing from iommu group 10 [ 10.346243] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 10.353652] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.360300] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 10.365335] avdd-cam-2v8: supplied by vdd-3v3-sys [ 10.370270] vdd-dp: supplied by vdd-3v3-sys [ 10.374726] vdd-3v3-sd: supplied by vdd-3v3-sys [ 10.379682] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 10.386632] tegra194-isp5 14800000.isp: initialized [ 10.393853] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 10.400303] (NULL device *): fops function table already registered [ 10.407561] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 10.414346] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 10.419901] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.436881] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 10.535441] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 10.542630] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 10.551312] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 10.559998] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 11.450604] random: crng init done [ 11.481334] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 11.675559] tegra194-pcie 141a0000.pcie: Phy link never came up [ 11.681721] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 11.688524] pci_bus 0005:00: root bus resource [bus 00-ff] [ 11.694172] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 11.704285] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.715129] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 11.723052] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 11.729377] pci 0005:00:00.0: PME# supported from D0 D3hot [ 11.743012] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 11.748413] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.757349] pcieport 0005:00:00.0: Adding to iommu group 11 [ 11.763322] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 11.769661] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 11.775631] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 11.781725] pci 0005:00:00.0: Removing from iommu group 11 [ 11.787371] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 11.795128] nvethernet 6810000.ethernet: Adding to iommu group 51 [ 11.801725] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 11.809879] nvethernet 6810000.ethernet: failed to read MDIO address [ 11.816412] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 11.823317] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.832179] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.841032] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 12.241062] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:a4:b5:60 [ 12.249386] nvethernet 6810000.ethernet: Macsec not enabled [ 12.255114] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 12.266114] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 12.274826] irq: IRQ304: trimming hierarchy from :pmc@c360000 [ 12.280791] irq: IRQ305: trimming hierarchy from :interrupt-controller@f400000-1 [ 12.288454] irq: IRQ306: trimming hierarchy from :pmc@c360000 [ 12.294413] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 12.301688] tegra-se-nvhost 15810000.se: Adding to iommu group 52 [ 12.308393] tegra-se-nvhost 15810000.se: initialized [ 12.325416] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 12.331774] tegra-se-nvhost 15820000.se: Adding to iommu group 53 [ 12.338451] tegra-se-nvhost 15820000.se: initialized [ 12.345151] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 12.351498] tegra-se-nvhost 15840000.se: Adding to iommu group 54 [ 12.358117] tegra-se-nvhost 15840000.se: initialized [ 12.366206] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 12.373052] tegra_actmon d230000.actmon: in actmon_register()... [ 12.379491] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 12.385712] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 12.394077] hvc_sysfs: hypervisor is not present ÿâWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ÿá[ 12.535545] ALSA device list: [ 12.538600] No soundcards found. [ 12.542709] Freeing unused kernel memory: 3968K [ 12.547440] Run /init as init process [ 12.563559] Root device found: mmcblk0p1 [ 12.568095] Found dev node: /dev/mmcblk0p1 [ 13.152204] EXT4-fs (mmcblk0p1): recovery complete [ 13.163297] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 13.172578] Rootfs mounted over mmcblk0p1 [ 13.189548] Switching from initrd to actual rootfs [ 13.288498] systemd[1]: System time before build time, advancing clock. [ 13.334415] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 13.358067] systemd[1]: Detected architecture arm64. [ 13.385507] systemd[1]: No hostname configured. [ 13.390186] systemd[1]: Set hostname to . [ 13.611472] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 13.624493] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 13.634044] systemd[1]: Created slice system-modprobe.slice. [ 13.640233] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.649992] systemd[1]: Reached target Slices. [ 13.654617] systemd[1]: Reached target Swap. [ 13.659301] systemd[1]: Listening on RPCbind Server Activation Socket. [ 13.666159] systemd[1]: Listening on fsck to fsckd communication Socket. [ 13.673154] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 13.680119] systemd[1]: Listening on Journal Audit Socket. [ 13.685903] systemd[1]: Listening on Journal Socket (/dev/log). [ 13.692161] systemd[1]: Listening on Journal Socket. [ 13.697440] systemd[1]: Listening on udev Control Socket. [ 13.703109] systemd[1]: Listening on udev Kernel Socket. [ 13.709534] systemd[1]: Mounting Huge Pages File System... [ 13.716134] systemd[1]: Mounting POSIX Message Queue File System... [ 13.723602] systemd[1]: Mounting Kernel Debug File System... [ 13.730357] systemd[1]: Mounting Kernel Trace File System... [ 13.737336] systemd[1]: Starting Journal Service... [ 13.743232] systemd[1]: Starting Set the console keyboard layout... [ 13.750652] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.760388] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 13.768317] systemd[1]: Starting Load Kernel Module efi_pstore... [ 13.775635] systemd[1]: Starting Load Kernel Module pstore_blk... [ 13.783042] systemd[1]: Starting Load Kernel Module pstore_zone... [ 13.790434] systemd[1]: Starting Load Kernel Module ramoops... [ 13.797329] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 13.805430] systemd[1]: Started Nameserver information manager. [ 13.811716] systemd[1]: Reached target Network (Pre). [ 13.817824] systemd[1]: Starting Set console scheme... [ 13.823851] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.833215] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 13.850180] systemd[1]: Starting Load Kernel Modules... [ 13.856444] systemd[1]: Starting Remount Root and Kernel File Systems... [ 13.863732] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 13.864319] systemd[1]: Starting udev Coldplug all Devices... [ 13.864601] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 13.864710] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000833000000,16777216 [ 13.864713] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 13.864720] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 13.864721] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 13.864725] nvmap_page_pool_init: Total RAM pages: 7830705 [ 13.864727] nvmap_page_pool_init: nvmap page pool size: 978838 pages (3823 MB) [ 13.864785] nvmap_background_zero_thread: PP zeroing thread starting. [ 13.864875] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 13.867912] misc nvmap: created heap fsi base 0x0000000833000000 size (16384KiB) [ 13.934890] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 13.934890] [ 13.968935] systemd[1]: Started Journal Service. [ 14.903699] systemd-journald[306]: Received client request to flush runtime journal. [ 17.842448] Unable to handle kernel paging request at virtual address 81ae5d31f89092bb [ 17.850640] Mem abort info: [ 17.853504] ESR = 0x96000004 [ 17.856661] EC = 0x25: DABT (current EL), IL = 32 bits [ 17.862123] SET = 0, FnV = 0 [ 17.865270] EA = 0, S1PTW = 0 [ 17.868505] Data abort info: [ 17.871468] ISV = 0, ISS = 0x00000004 [ 17.875427] CM = 0, WnR = 0 [ 17.878488] [81ae5d31f89092bb] address between user and kernel address ranges [ 17.885845] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 17.891574] Modules linked in: ina3221 pwm_fan nvgpu nvmap ip_tables x_tables [ 17.898923] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 17.905728] Hardware name: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 17.914757] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 17.920938] pc : file_free_rcu+0x34/0x90 [ 17.924963] lr : file_free_rcu+0x1c/0x90 [ 17.928988] sp : ffff800010003de0 [ 17.932393] x29: ffff800010003de0 x28: ffffb6b7e98b7000 [ 17.937847] x27: ffffb6b7e9bb2680 x26: ffffb6b7e9bb2680 [ 17.943311] x25: ffff800010003e90 x24: ffff24c06eba0af0 [ 17.948764] x23: ffffb6b7e9c3ae40 x22: ffffb6b7e9bb2680 [ 17.954220] x21: ffffb6b7e9ba8998 x20: ffffb6b7e98b7000 [ 17.959677] x19: ffff24b94a34d000 x18: 0000000000000015 [ 17.965134] x17: 0000000000000007 x16: 000000000000000e [ 17.970592] x15: 0000000000000141 x14: 0000000000000143 [ 17.976047] x13: 0000000000000001 x12: 0000000000000500 [ 17.981511] x11: 0000000000000001 x10: 0000000000000001 [ 17.986966] x9 : 0000000000000000 x8 : ffffb6b7e9bb2680 [ 17.992423] x7 : 0000000000000020 x6 : ffff6e08852d4000 [ 17.997877] x5 : 0000000000000001 x4 : fffffe92e4f6db60 [ 18.003334] x3 : 000000008015000d x2 : ffffb6b7e805e170 [ 18.008792] x1 : 00000000ffffffff x0 : 81ae5d31f89092bb [ 18.014251] Call trace: [ 18.016764] file_free_rcu+0x34/0x90 [ 18.020442] rcu_core+0x274/0x980 [ 18.023853] rcu_core_si+0x18/0x20 [ 18.027348] __do_softirq+0x140/0x3e8 [ 18.031110] irq_exit+0xc0/0xe0 [ 18.034339] __handle_domain_irq+0x74/0xd0 [ 18.038543] gic_handle_irq+0x68/0x134 [ 18.042396] el1_irq+0xd0/0x180 [ 18.045616] cpuidle_enter_state+0xb8/0x410 [ 18.049907] cpuidle_enter+0x40/0x60 [ 18.053581] call_cpuidle+0x44/0x80 [ 18.057173] do_idle+0x208/0x270 [ 18.060492] cpu_startup_entry+0x30/0x70 [ 18.064521] rest_init+0xdc/0xe8 [ 18.067845] arch_call_rest_init+0x18/0x20 [ 18.072062] start_kernel+0x514/0x54c [ 18.075824] Code: d503201f d503201f 52800021 4b0103e1 (b8e10002) [ 18.082110] ---[ end trace d285523b96012400 ]--- [ 18.086853] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 18.093927] SMP: stopping secondary CPUs [ 18.097962] Kernel Offset: 0x36b7d7ea0000 from 0xffff800010000000 [ 18.104222] PHYS_OFFSET: 0xffffdb47c0000000 [ 18.108514] CPU features: 0x0040006,4a80aa38 [ 18.112899] Memory Limit: none [ 18.116030] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---