sudo reboot now
[71476.677403] nvgpu: 17000000.gv11b     nvgpu_timeout_expired_msg_cpu:94   [ERR]  Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] 
[
ÿâ
[0000.054] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0000.062] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1)
[0000.068] I> Boot-mode: Coldboot
[0000.071] I> Platform: Silicon
[0000.073] I> Chip revision : A02P
[0000.076] I> Bootrom patch version : 15 (correctly patched)
[0000.082] I> ATE fuse revision : 0x200
[0000.085] I> Ram repair fuse : 0x0
[0000.088] I> Ram Code : 0x2
[0000.091] I> rst_source: 0xb, rst_level: 0x1
[0000.096] I> Boot-device: SDMMC (instance: 3)
[0000.112] I> sdmmc DDR50 mode
[0000.115] I> Boot chain mechanism: A/B
[0000.119] I> Current Boot-Chain Slot: 0
[0000.122] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0
[0000.130] W> PROD_CONFIG: device prod data is empty in MB1 BCT.
[0000.135] I> Temperature = 46500
[0000.138] W> Skipping boost for clk: BPMP_CPU_NIC
[0000.143] W> Skipping boost for clk: BPMP_APB
[0000.147] W> Skipping boost for clk: AXI_CBB
[0000.151] W> Skipping boost for clk: AON_CPU_NIC
[0000.155] W> Skipping boost for clk: CAN1
[0000.158] W> Skipping boost for clk: CAN2
[0000.163] I> Boot-device: SDMMC (instance: 3)
[0000.173] I> Sdmmc: HS400 mode enabled
[0000.178] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0000.185] W>  Thermal config not found in BCT
[0000.193] W>  MEMIO rail config not found in BCT
[0000.215] I> sdmmc bdev is already initialized
[0000.264] W>  Platform config not found in BCT
[0000.298] I> MB1 done

ÿýÿàmain enter
SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27
HW Function test
Start Scheduler.
in late init
ÿâ
[0000.307] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4)
[0000.308] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0000.309] I> Default Heap @ [0xd486400 - 0xd48a400]
[0000.310] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0000.315] W> device prod register failed
[0000.319] I> gpio framework initialized
[0000.322] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0000.330] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0000.338] I> No valid sdcard_params in mb1_bct
[0000.342] I> Boot_device: SDMMC_BOOT instance: 3
[0000.346] I> sdmmc-3 params source = boot args
[0000.355] I> sdmmc-3 params source = boot args
[0000.356] I> sdmmc bdev is already initialized
[0000.389] I> Found 20 partitions in SDMMC_BOOT (instance 3)
[0000.405] I> Found 41 partitions in SDMMC_USER (instance 3)
[0000.406] I> Active Boot chain : 0
[0000.471] I> Relocating BR-BCT
[0000.473]  > DEVICE_PROD: device prod is not initialized.
[0000.498] E> I2C: slave not found in slaves.
[0000.499] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0000.500] E> I2C_DEV: Failed to send register address 0x00000000.
[0000.501] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0.
[0000.502] E> eeprom: Failed to read I2C slave device
[0000.505] I> Failed to read CVB eeprom data @ AE
[0000.509] I> Retrying CVB eeprom read @ AC ...
[0000.514] E> I2C: slave not found in slaves.
[0000.518] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0000.525] E> I2C_DEV: Failed to send register address 0x00000000.
[0000.531] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0.
[0000.540] E> eeprom: Failed to read I2C slave device
[0000.545] I> Failed to read CVB eeprom data @ AC
[0000.596] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008
[0000.597] I> [0] START: 0x80000000, SIZE: 0x2f000000
[0000.598] I> [1] START: 0xaf010000, SIZE: 0x18bf0000
[0000.598] I> [2] START: 0xc7d00000, SIZE: 0xc0000
[0000.598] I> [3] START: 0xca000000, SIZE: 0x800000
[0000.599] I> dram_block larger than 80000000
[0000.601] I> [4] START: 0x100000000, SIZE: 0x780000000
[0000.613] I> Setting NS memory ranges to OP-TEE dtb finished.
[0000.627] I> found decompressor handler: lz4
[0001.122] I> EKB detected (length: 0x410) @ VA:0x526ff400
[0001.124] I> Setting EKB blob info to OPTEE dtb finished.
ÿäNOTICE:  BL31: v2.6(release):4fa405dbd
NOTICE:  BL31: Built : 20:16:55, Aug 10 2022
I/TC: 
ÿâ
ÿäI/TC: Non-secure external DT found
ÿâbpmp: init
bpmp: tag is 128431eec76692047e1ac1ebc0392266
sku_dt_init: not sku 0x00
clk_early initialized
mail_early initialized
fuse initialized
hwwdt initialized
t194_ec_get_ec_list: found 45 ecs
ec initialized
vmon_setup_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
mc initialized
reset initialized
nvhs initialized
uphy_early initialized
emc_early initialized
392 clocks registered
clk initialized
io_dpd initialized
thermal initialized
thermal_mrq initialized
i2c initialized
vrmon_dt_init: vrmon node not found
vrmon_chk_boot_state: found 0 rail monitors
vrmon initialized
regulator initialized
ÿäI/TC: OP-TEE version: 3.16 (gcc versiÿâavfs_clk_platform initialized
ÿäon 9.3.0 (Bÿâsoctherm initialized
ÿäuiÿâaotag initialized
ÿäldÿâpowergate initialized
ÿäroot 2020.08)) #2 Thu Aug 11 03:23:20 UTC 2022 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latestÿâdvs initialized
ÿä/aÿâpm initialized
ÿärÿâsuspend initialized
ÿächitÿâpg_late initialized
ÿäeÿâpg_mrq_init initialized
strap initialized
ÿäctÿânvl initialized
ÿäure/portiÿâemc initialized
emc_mrq initialized
ÿäng_guidelines.html
I/TC: Primary CPU initializing
ÿâclk_dt initialized
tj_init initialized
uphy_dt initialized
uphy_mrq initialized
uphy initialized
ec_swd_poll_start: 281 reg polling start w period 47 ms
ec_late initialized
hwwdt_late initialized
reset_mrq initialized
ec_mrq initialized
fmon_mrq initialized
clk_mrq initialized
avfs_mrq initialized
mail_mrq initialized
i2c_mrq initialized
tag_mrq initialized
console_mrq initialized
mrq initialized
clk_sync_fmon_post initialized
clk_dt_late initialized
noc_late initialized
pm_post initialized
dbells initialized
dmce initialized
cvc initialized
avfs_clk_mach_post initialized
avfs_clk_platform_post initialized
cvc_late initialized
regulator_post initialized
rm initialized
console_late initialized
clk_dt_post initialized
mc_reg initialized
pg_post initialized
profile initialized
fuse_late initialized
extras_post initialized
bpmp: init complete
entering main console loop
] ÿäI/TC: Primary CPU switching to normal world boot
ÿá
[0001.774] I> Welcome to NVDisp-Init
[0001.774] I> NVDisp-Init version: t194-f9ecfedc
[0001.774] I> CPU-BL Params @ 0xca020000
[0001.775] I>  0) Base:0x00000000 Size:0x00000000
[0001.775] I>  1) Base:0xc8300000 Size:0x00100000
[0001.775] I>  2) Base:0xc9800000 Size:0x00200000
[0001.776] I>  3) Base:0xc8600000 Size:0x00200000
[0001.778] I>  4) Base:0xc8200000 Size:0x00100000
[0001.783] I>  5) Base:0xc8100000 Size:0x00100000
[0001.787] I>  6) Base:0xc9400000 Size:0x00400000
[0001.792] I>  7) Base:0xc9000000 Size:0x00400000
[0001.796] I>  8) Base:0xc8000000 Size:0x00100000
[0001.801] I>  9) Base:0xc7f00000 Size:0x00100000
[0001.805] I> 10) Base:0xca800000 Size:0x00800000
[0001.809] I> 11) Base:0x40000000 Size:0x00040000
[0001.814] I> 12) Base:0xc7e00000 Size:0x00100000
[0001.818] I> 13) Base:0x40046000 Size:0x00002000
[0001.823] I> 14) Base:0x40048000 Size:0x00002000
[0001.827] I> 15) Base:0xaf000000 Size:0x00004000
[0001.832] I> 16) Base:0x4004a000 Size:0x00002000
[0001.836] I> 17) Base:0xc7c00000 Size:0x00100000
[0001.841] I> 18) Base:0x4004c000 Size:0x00002000
[0001.845] I> 19) Base:0xc9a00000 Size:0x00600000
[0001.850] I> 20) Base:0x4004e000 Size:0x00002000
[0001.854] I> 21) Base:0xc7dc0000 Size:0x0000c000
[0001.859] I> 22) Base:0x00000000 Size:0x00000000
[0001.863] I> 23) Base:0xc7de0000 Size:0x00020000
[0001.867] I> 24) Base:0xcc000000 Size:0x02000000
[0001.872] I> 25) Base:0x40050000 Size:0x00002000
[0001.876] I> 26) Base:0x40040000 Size:0x00006000
[0001.881] I> 27) Base:0xc8c00000 Size:0x00400000
[0001.885] I> 28) Base:0xc8400000 Size:0x00200000
[0001.890] I> 29) Base:0xc8800000 Size:0x00400000
[0001.894] I> 30) Base:0xc7dd0000 Size:0x00010000
[0001.899] I> 31) Base:0x00000000 Size:0x00000000
[0001.903] I> 32) Base:0xf8000000 Size:0x08000000
[0001.908] I> 33) Base:0xce000000 Size:0x2a000000
[0001.912] I> 34) Base:0xcb000000 Size:0x01000000
[0001.917] I> 35) Base:0xae000000 Size:0x01000000
[0001.921] I> 36) Base:0xa0000000 Size:0x0e000000
[0001.925] I> 37) Base:0xca000000 Size:0x00800000
[0001.930] I> 38) Base:0x80000000 Size:0x20000000
[0001.934] I> 39) Base:0xb0000000 Size:0x08000000
[0001.939] I> 40) Base:0x00000000 Size:0x00000000
[0001.943] I> 41) Base:0x00000000 Size:0x00000000
[0001.948] I> 42) Base:0x00000000 Size:0x00000000
[0001.952] I> 43) Base:0x00000000 Size:0x00000000
[0001.957] I> 44) Base:0x00000000 Size:0x00000000
[0001.961] I> 45) Base:0x00000000 Size:0x00000000
[0001.966] GIC-SPI Target CPU: 0
[0001.969] Interrupts Init done
[0001.972] calling constructors
[0001.974] initializing heap
[0001.977] I> Heap: [0xa0960000 ... 0xadf00000]
[0001.981] initializing threads
[0001.984] initializing timers
[0001.987] creating bootstrap completion thread
[0001.991] top of bootstrap2()
[0001.994] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000
[0001.999] initializing platform
[0002.002] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0002.007] W> device prod register failed
[0002.011] I> Bl_dtb @0xadf00000
[0002.014] I> gpio framework initialized
[0002.021] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0002.027] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0002.034] I> fixed regulator driver initialized
[0002.043] I> register 'maxim' power off handle
[0002.046] I> virtual i2c enabled
[0002.046] I> registered 'maxim,max20024' pmic
[0002.049] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver
[0002.055] I> Boot-device: eMMC
[0002.058] I> Boot_device: SDMMC_BOOT instance: 3
[0002.065] I> sdmmc-3 params source = boot args
[0002.067] W> No board IDs available
[0002.070] E> Failed to get board id info!
[0002.074] I> sdmmc bdev is already initialized
[0002.078] I> sdmmc-3 params source = boot args
[0002.085] I> Found 20 partitions in SDMMC_BOOT (instance 3)
[0002.090] I> Found 41 partitions in SDMMC_USER (instance 3)
[0002.101] E> no regulator info present for avdd_hdmi-supply
[0002.101] E> tegrabl_display_get_pdata, failed to parse dtb settings
[0002.108] E> no regulator info present for avdd_hdmi-supply
[0002.111] E> tegrabl_display_get_pdata, failed to parse dtb settings
[0002.117] E> cannot find any other nvdisp nodes
[0002.121] E> no valid display unit config found in dtb
[0002.129] W> display init failed
[0002.129] initializing target
[0002.132] calling apps_init()
[0002.135] starting app kernel_boot_app
[0002.138] I> Kernel type = Normal

Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00)





















































































































































3h












Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00)
Press ESCAPE for boot options 
**  WARNING: Test Key is used.  **
ASSERT [TerminalDxe] /dvs/git/dirty/git-master_linux/out/nvidia/bootloader/uefi/Jetson_RELEASE/edk2/MdeModulePkg/Universal/Console/TerminalDxe/TerminalConIn.c(2078): ((BOOLEAN)(0==1))

Resetting the system in 5 seconds.
ÿäÿâShutdown state requested 1
Rebooting system ...
ÿâ
[0000.055] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0000.063] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1)
[0000.068] I> Boot-mode: Coldboot
[0000.071] I> Platform: Silicon
[0000.074] I> Chip revision : A02P
[0000.077] I> Bootrom patch version : 15 (correctly patched)
[0000.082] I> ATE fuse revision : 0x200
[0000.086] I> Ram repair fuse : 0x0
[0000.089] I> Ram Code : 0x2
[0000.091] I> rst_source: 0xb, rst_level: 0x1
[0000.096] I> Boot-device: SDMMC (instance: 3)
[0000.112] I> sdmmc DDR50 mode
[0000.116] I> Boot chain mechanism: A/B
[0000.119] I> Current Boot-Chain Slot: 0
[0000.123] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0
[0000.130] W> PROD_CONFIG: device prod data is empty in MB1 BCT.
[0000.136] I> Temperature = 46500
[0000.139] W> Skipping boost for clk: BPMP_CPU_NIC
[0000.143] W> Skipping boost for clk: BPMP_APB
[0000.147] W> Skipping boost for clk: AXI_CBB
[0000.151] W> Skipping boost for clk: AON_CPU_NIC
[0000.156] W> Skipping boost for clk: CAN1
[0000.159] W> Skipping boost for clk: CAN2
[0000.164] I> Boot-device: SDMMC (instance: 3)
[0000.174] I> Sdmmc: HS400 mode enabled
[0000.179] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0000.186] W>  Thermal config not found in BCT
[0000.194] W>  MEMIO rail config not found in BCT
[0000.216] I> sdmmc bdev is already initialized
[0000.265] W>  Platform config not found in BCT
[0000.299] I> MB1 done

ÿýÿàmain enter
SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27
HW Function test
Start Scheduler.
in late init
ÿâ
[0000.308] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4)
[0000.309] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0000.309] I> Default Heap @ [0xd486400 - 0xd48a400]
[0000.310] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0000.316] W> device prod register failed
[0000.319] I> gpio framework initialized
[0000.323] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0000.330] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0000.338] I> No valid sdcard_params in mb1_bct
[0000.343] I> Boot_device: SDMMC_BOOT instance: 3
[0000.347] I> sdmmc-3 params source = boot args
[0000.356] I> sdmmc-3 params source = boot args
[0000.356] I> sdmmc bdev is already initialized
[0000.389] I> Found 20 partitions in SDMMC_BOOT (instance 3)
[0000.405] I> Found 41 partitions in SDMMC_USER (instance 3)
[0000.406] I> Active Boot chain : 0
[0000.468] I> Relocating BR-BCT
[0000.470]  > DEVICE_PROD: device prod is not initialized.
[0000.496] E> I2C: slave not found in slaves.
[0000.497] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0000.498] E> I2C_DEV: Failed to send register address 0x00000000.
[0000.499] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0.
[0000.500] E> eeprom: Failed to read I2C slave device
[0000.502] I> Failed to read CVB eeprom data @ AE
[0000.507] I> Retrying CVB eeprom read @ AC ...
[0000.512] E> I2C: slave not found in slaves.
[0000.516] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0000.523] E> I2C_DEV: Failed to send register address 0x00000000.
[0000.529] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0.
[0000.538] E> eeprom: Failed to read I2C slave device
[0000.543] I> Failed to read CVB eeprom data @ AC
[0000.595] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008
[0000.596] I> [0] START: 0x80000000, SIZE: 0x2f000000
[0000.597] I> [1] START: 0xaf010000, SIZE: 0x18bf0000
[0000.597] I> [2] START: 0xc7d00000, SIZE: 0xc0000
[0000.598] I> [3] START: 0xca000000, SIZE: 0x800000
[0000.598] I> dram_block larger than 80000000
[0000.600] I> [4] START: 0x100000000, SIZE: 0x780000000
[0000.612] I> Setting NS memory ranges to OP-TEE dtb finished.
[0000.626] I> found decompressor handler: lz4
[0001.121] I> EKB detected (length: 0x410) @ VA:0x526ff400
[0001.122] I> Setting EKB blob info to OPTEE dtb finished.
ÿäNOTICE:  BL31: v2.6(release):4fa405dbd
NOTICE:  BL31: Built : 20:16:55, Aug 10 2022
I/TC: 
ÿâ
ÿäI/TC: Non-secure external DT found
ÿâbpmp: init
bpmp: tag is 128431eec76692047e1ac1ebc0392266
sku_dt_init: not sku 0x00
clk_early initialized
mail_early initialized
fuse initialized
hwwdt initialized
t194_ec_get_ec_list: found 45 ecs
ec initialized
vmon_setup_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
mc initialized
reset initialized
nvhs initialized
uphy_early initialized
emc_early initialized
392 clocks registered
clk initialized
io_dpd initialized
thermal initialized
thermal_mrq initialized
i2c initialized
vrmon_dt_init: vrmon node not found
vrmon_chk_boot_state: found 0 rail monitors
vrmon initialized
regulator initialized
ÿäI/TC: OP-TEE version: 3.16 (gcc verÿâavfs_clk_platform initialized
ÿäsion 9.3.0 ÿâsoctherm initialized
ÿä(Bÿâaotag initialized
ÿäuiÿâpowergate initialized
ÿäldroot 2020.08)) #2 Thu Aug 11 03:23:20 UTC 2022 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latestÿâdvs initialized
ÿä/aÿâpm initialized
ÿärÿâsuspend initialized
ÿächiÿâpg_late initialized
ÿäteÿâpg_mrq_init initialized
strap initialized
ÿäcÿânvl initialized
ÿäture/portiÿâemc initialized
emc_mrq initialized
ÿäng_guidelines.html
I/TC: Primary CPU initializing
ÿâclk_dt initialized
tj_init initialized
uphy_dt initialized
uphy_mrq initialized
uphy initialized
ec_swd_poll_start: 281 reg polling start w period 47 ms
ec_late initialized
hwwdt_late initialized
reset_mrq initialized
ec_mrq initialized
fmon_mrq initialized
clk_mrq initialized
avfs_mrq initialized
mail_mrq initialized
i2c_mrq initialized
tag_mrq initialized
console_mrq initialized
mrq initialized
clk_sync_fmon_post initialized
clk_dt_late initialized
noc_late initialized
pm_post initialized
dbells initialized
dmce initialized
cvc initialized
avfs_clk_mach_post initialized
avfs_clk_platform_post initialized
cvc_late initialized
regulator_post initialized
rm initialized
console_late initialized
clk_dt_post initialized
mc_reg initialized
pg_post initialized
profile initialized
fuse_late initialized
extras_post initialized
bpmp: init complete
entering main console loop
] ÿäI/TC: Primary CPU switching to normal world boot
ÿá
[0001.773] I> Welcome to NVDisp-Init
[0001.773] I> NVDisp-Init version: t194-f9ecfedc
[0001.773] I> CPU-BL Params @ 0xca020000
[0001.773] I>  0) Base:0x00000000 Size:0x00000000
[0001.774] I>  1) Base:0xc8300000 Size:0x00100000
[0001.774] I>  2) Base:0xc9800000 Size:0x00200000
[0001.774] I>  3) Base:0xc8600000 Size:0x00200000
[0001.777] I>  4) Base:0xc8200000 Size:0x00100000
[0001.781] I>  5) Base:0xc8100000 Size:0x00100000
[0001.786] I>  6) Base:0xc9400000 Size:0x00400000
[0001.790] I>  7) Base:0xc9000000 Size:0x00400000
[0001.795] I>  8) Base:0xc8000000 Size:0x00100000
[0001.799] I>  9) Base:0xc7f00000 Size:0x00100000
[0001.804] I> 10) Base:0xca800000 Size:0x00800000
[0001.808] I> 11) Base:0x40000000 Size:0x00040000
[0001.813] I> 12) Base:0xc7e00000 Size:0x00100000
[0001.817] I> 13) Base:0x40046000 Size:0x00002000
[0001.822] I> 14) Base:0x40048000 Size:0x00002000
[0001.826] I> 15) Base:0xaf000000 Size:0x00004000
[0001.830] I> 16) Base:0x4004a000 Size:0x00002000
[0001.835] I> 17) Base:0xc7c00000 Size:0x00100000
[0001.839] I> 18) Base:0x4004c000 Size:0x00002000
[0001.844] I> 19) Base:0xc9a00000 Size:0x00600000
[0001.848] I> 20) Base:0x4004e000 Size:0x00002000
[0001.853] I> 21) Base:0xc7dc0000 Size:0x0000c000
[0001.857] I> 22) Base:0x00000000 Size:0x00000000
[0001.862] I> 23) Base:0xc7de0000 Size:0x00020000
[0001.866] I> 24) Base:0xcc000000 Size:0x02000000
[0001.871] I> 25) Base:0x40050000 Size:0x00002000
[0001.875] I> 26) Base:0x40040000 Size:0x00006000
[0001.880] I> 27) Base:0xc8c00000 Size:0x00400000
[0001.884] I> 28) Base:0xc8400000 Size:0x00200000
[0001.888] I> 29) Base:0xc8800000 Size:0x00400000
[0001.893] I> 30) Base:0xc7dd0000 Size:0x00010000
[0001.897] I> 31) Base:0x00000000 Size:0x00000000
[0001.902] I> 32) Base:0xf8000000 Size:0x08000000
[0001.906] I> 33) Base:0xce000000 Size:0x2a000000
[0001.911] I> 34) Base:0xcb000000 Size:0x01000000
[0001.915] I> 35) Base:0xae000000 Size:0x01000000
[0001.920] I> 36) Base:0xa0000000 Size:0x0e000000
[0001.924] I> 37) Base:0xca000000 Size:0x00800000
[0001.929] I> 38) Base:0x80000000 Size:0x20000000
[0001.933] I> 39) Base:0xb0000000 Size:0x08000000
[0001.938] I> 40) Base:0x00000000 Size:0x00000000
[0001.942] I> 41) Base:0x00000000 Size:0x00000000
[0001.947] I> 42) Base:0x00000000 Size:0x00000000
[0001.951] I> 43) Base:0x00000000 Size:0x00000000
[0001.955] I> 44) Base:0x00000000 Size:0x00000000
[0001.960] I> 45) Base:0x00000000 Size:0x00000000
[0001.964] GIC-SPI Target CPU: 0
[0001.967] Interrupts Init done
[0001.970] calling constructors
[0001.973] initializing heap
[0001.976] I> Heap: [0xa0960000 ... 0xadf00000]
[0001.980] initializing threads
[0001.983] initializing timers
[0001.986] creating bootstrap completion thread
[0001.990] top of bootstrap2()
[0001.993] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000
[0001.997] initializing platform
[0002.000] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0002.006] W> device prod register failed
[0002.010] I> Bl_dtb @0xadf00000
[0002.013] I> gpio framework initialized
[0002.020] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0002.026] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0002.033] I> fixed regulator driver initialized
[0002.042] I> register 'maxim' power off handle
[0002.044] I> virtual i2c enabled
[0002.045] I> registered 'maxim,max20024' pmic
[0002.047] I> tegrabl_gpio_driver_regist