�� [0000.085] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.093] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.098] I> Boot-mode: Coldboot [0000.101] I> Chip revision : A02 [0000.104] I> Bootrom patch version : 15 (correctly patched) [0000.110] I> ATE fuse revision : 0x200 [0000.113] I> Ram repair fuse : 0x0 [0000.116] I> Ram Code : 0x0 [0000.119] I> rst_source : 0x0 [0000.121] I> rst_level : 0x0 [0000.125] I> Boot-device: eMMC [0000.140] I> sdmmc DDR50 mode [0000.144] W> No valid slot number is found in scratch register [0000.149] W> Return default slot: _a [0000.153] I> Active Boot chain : 0 [0000.156] I> Boot-device: eMMC [0000.160] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.167] I> Temperature = 24000 [0000.170] W> Skipping boost for clk: BPMP_CPU_NIC [0000.175] W> Skipping boost for clk: BPMP_APB [0000.179] W> Skipping boost for clk: AXI_CBB [0000.183] W> Skipping boost for clk: AON_CPU_NIC [0000.187] W> Skipping boost for clk: CAN1 [0000.191] W> Skipping boost for clk: CAN2 [0000.195] I> Boot-device: eMMC [0000.198] I> Boot-device: eMMC [0000.207] I> Sdmmc: HS400 mode enabled [0000.212] I> ECC region[0]: Start:0x0, End:0x0 [0000.216] I> ECC region[1]: Start:0x0, End:0x0 [0000.220] I> ECC region[2]: Start:0x0, End:0x0 [0000.224] I> ECC region[3]: Start:0x0, End:0x0 [0000.228] I> ECC region[4]: Start:0x0, End:0x0 [0000.232] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.238] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.242] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.247] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.251] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.257] E> FAILED: Thermal config [0000.264] E> FAILED: MEMIO rail config [0000.277] I> Boot-device: eMMC [0000.286] I> sdmmc bdev is already initialized [0000.359] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.367] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.368] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.369] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.369] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.375] W> device prod register failed [0000.379] I> Boot-device: eMMC [0000.382] I> Boot_device: SDMMC_BOOT instance: 3 [0000.388] I> sdmmc-3 params source = boot args [0000.391] I> sdmmc bdev is already initialized [0000.395] I> sdmmc-3 params source = boot args [0000.403] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.410] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.411] W> No valid slot number is found in scratch register [0000.416] W> Return default slot: _a [0000.419] I> Active Boot chain : 0 [0000.423] I> parsing oem signed section of bpmp-fw header done [0000.428] I> bpmp-fw binary init read from storage [0000.433] I> oem authentication of bpmp-fw header done [0000.440] I> bpmp-fw binary done read from storage [0000.442] I> bpmp-fw: Authentication init Done [0000.448] I> parsing oem signed section of cpubl header done [0000.452] I> cpubl binary init read from storage [0000.457] I> bpmp-fw: Authentication Finalize Done [0000.461] I> oem authentication of cpubl header done [0000.466] I> cpubl binary done read from storage [0000.471] I> cpubl: Authentication init Done [0000.475] I> parsing oem signed section of rce header done [0000.480] I> rce binary init read from storage [0000.485] I> Relocating BR-BCT [0000.487] I> cpubl: Authentication Finalize Done [0000.492] I> oem authentication of rce header done [0000.496] I> rce binary done read from storage [0000.501] I> rce: Authentication init Done [0000.505] I> parsing oem signed section of ape header done [0000.510] I> ape binary init read from storage [0000.514] I> rce: Authentication Finalize Done [0000.519] I> oem authentication of ape header done [0000.523] I> ape binary done read from storage [0000.527] I> ape: Authentication init Done [0000.532] I> parsing oem signed section of tos header done [0000.537] I> tos binary init read from storage [0000.541] I> ape: Authentication Finalize Done [0000.546] I> oem authentication of tos header done [0000.550] I> tos binary done read from storage [0000.554] I> tos: Authentication init Done [0000.560] I> parsing oem signed section of bpmp-fw-dtb header done [0000.564] I> bpmp-fw-dtb binary init read from storage [0000.569] I> tos: Authentication Finalize Done [0000.575] I> oem authentication of bpmp-fw-dtb header done [0000.582] I> bpmp-fw-dtb binary done read from storage [0000.584] I> bpmp-fw-dtb: Authentication init Done [0000.589] I> parsing oem signed section of cpubl-dtb header done [0000.594] I> cpubl-dtb binary init read from storage [0000.599] I> bpmp-fw-dtb: Authentication Finalize Done [0000.637] I> oem authentication of cpubl-dtb header done [0000.638] I> cpubl-dtb binary done read from storage [0000.638] I> cpubl-dtb: Authentication init Done [0000.640] I> parsing oem signed section of eks header done [0000.641] I> eks binary init read from storage [0000.641] I> cpubl-dtb: Authentication Finalize Done [0000.642] I> oem authentication of eks header done [0000.646] I> eks binary done read from storage [0000.650] I> eks: Authentication init Done [0000.654] I> eks: Authentication Finalize Done [0000.658] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized �� ��mrq initialized ��[0001.126] I> Welcome to Cboot ��fmon_post initialized ��[0001.127] I> Cboot Version: t194-cfa2bc91 [0001.127] I> CPU-BL Params @ 0xf2820000 [0001.128] I> 0) Base:0x00000000 Size:0x00000000 [0001.131] I> 1) Base:0xf1100000 Size:0x00100000 [0001.136] I> 2) Base:0xf2000000 Size:0x00200000 [0001.140] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.145] I> 4) Base:0xf1000000 Size:0x00100000 [0001.224] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.229] I> 6) Base:0xf3800000 Size:0x00400000 [0001.233] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.238] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.242] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.247] I> 10) Base:0xf3000000 Size:0x00800000 [0001.251] I> 11) Base:0x40000000 Size:0x00040000 [0001.256] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.260] I> 13) Base:0x40046000 Size:0x00002000 [0001.264] I> 14) Base:0x40048000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� [0001.274] I> 15) Base:0xac000000 Size:0x00004000 ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.278] I> 16) Base:0x4004a000 Size:0x00002000 [0001.329] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.333] I> 18) Base:0x4004c000 Size:0x00002000 [0001.338] I> 19) Base:0xf2200000 Size:0x00600000 [0001.342] I> 20) Base:0x4004e000 Size:0x00002000 [0001.346] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.351] I> 22) Base:0x00000000 Size:0x00000000 [0001.355] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.360] I> 24) Base:0xf6000000 Size:0x02000000 [0001.364] I> 25) Base:0x40050000 Size:0x00002000 [0001.369] I> 26) Base:0x40040000 Size:0x00006000 [0001.373] I> 27) Base:0xf1800000 Size:0x00400000 [0001.378] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.382] I> 29) Base:0xf1400000 Size:0x00400000 [0001.387] I> 30) Base:0x00000000 Size:0x00000000 [0001.391] I> 31) Base:0x00000000 Size:0x00000000 [0001.396] I> 32) Base:0xf8000000 Size:0x08000000 [0001.400] I> 33) Base:0x00000000 Size:0x00000000 [0001.404] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.409] I> 35) Base:0xab000000 Size:0x01000000 [0001.413] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.418] I> 37) Base:0xf2800000 Size:0x00800000 [0001.422] I> 38) Base:0x80000000 Size:0x20000000 [0001.427] I> 39) Base:0xb0000000 Size:0x08000000 [0001.431] I> 40) Base:0x00000000 Size:0x00000000 [0001.436] I> 41) Base:0x00000000 Size:0x00000000 [0001.440] I> 42) Base:0x00000000 Size:0x00000000 [0001.445] I> 43) Base:0x00000000 Size:0x00000000 [0001.449] I> 44) Base:0x00000000 Size:0x00000000 [0001.454] I> 45) Base:0x00000000 Size:0x00000000 [0001.458] GIC-SPI Target CPU: 0 [0001.461] Interrupts Init done [0001.464] calling constructors [0001.467] initializing heap [0001.469] I> Heap: [0xa0699b80 ... 0xab000000] [0001.474] initializing threads [0001.477] initializing timers [0001.479] creating bootstrap completion thread [0001.484] top of bootstrap2() [0001.486] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.491] initializing platform [0001.494] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.499] W> device prod register failed [0001.503] I> Bl_dtb @0xaaf00000 [0001.510] W> "plugin-manager" doesn't exist, creating [0001.511] W> "ids" doesn't exist, creating [0001.515] W> "connection" doesn't exist, creating [0001.520] W> "configs" doesn't exist, creating [0001.531] E> failed to read label property for node 227172: 13 [0001.534] E> failed to read reg property for node 227260: 13 [0001.537] E> failed to read label property for node 227312: 13 [0001.543] E> failed to read label property for node 227380: 13 [0001.548] E> failed to read label property for node 227416: 13 [0001.554] E> failed to read label property for node 227452: 13 [0001.560] E> failed to read reg property for node 227520: 13 [0001.565] E> failed to read label property for node 227572: 13 [0001.572] I> Find /i2c@3160000's alias i2c0 [0001.573] I> Reading eeprom i2c=0 address=0x50 [0001.603] I> Device at /i2c@3160000:0x50 [0001.603] I> Reading eeprom i2c=0 address=0x56 [0001.627] I> Device at /i2c@3160000:0x56 [0001.629] I> Find /i2c@3180000's alias i2c2 [0001.629] I> Reading eeprom i2c=2 address=0x54 [0001.631] E> I2C: slave not found in slaves. [0001.631] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.632] E> I2C_DEV: Failed to send register address 0x00000000. [0001.633] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.641] E> eeprom: Failed to read I2C slave device [0001.646] I> Eeprom read failed 0x3526070d [0001.650] I> Reading eeprom i2c=2 address=0x57 [0001.655] E> I2C: slave not found in slaves. [0001.659] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.667] E> I2C_DEV: Failed to send register address 0x00000000. [0001.672] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.682] E> eeprom: Failed to read I2C slave device [0001.686] I> Eeprom read failed 0x3526070d [0001.690] I> Reading eeprom i2c=2 address=0x52 [0001.695] E> I2C: slave not found in slaves. [0001.699] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.707] E> I2C_DEV: Failed to send register address 0x00000000. [0001.712] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.722] E> eeprom: Failed to read I2C slave device [0001.726] I> Eeprom read failed 0x3526070d [0001.732] I> Find /i2c@c240000's alias i2c1 [0001.734] I> Reading eeprom i2c=1 address=0x52 [0001.740] E> I2C: slave not found in slaves. [0001.743] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.751] E> I2C_DEV: Failed to send register address 0x00000000. [0001.756] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.766] E> eeprom: Retry to read I2C slave device. [0001.771] E> I2C: slave not found in slaves. [0001.775] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.783] E> I2C_DEV: Failed to send register address 0x00000000. [0001.788] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.798] E> eeprom: Failed to read I2C slave device [0001.802] I> Eeprom read failed 0x3526070d [0001.806] I> Reading eeprom i2c=1 address=0x50 [0001.811] E> I2C: slave not found in slaves. [0001.815] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.823] E> I2C_DEV: Failed to send register address 0x00000000. [0001.828] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.838] E> eeprom: Retry to read I2C slave device. [0001.843] E> I2C: slave not found in slaves. [0001.847] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.854] E> I2C_DEV: Failed to send register address 0x00000000. [0001.860] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.870] E> eeprom: Failed to read I2C slave device [0001.874] I> Eeprom read failed 0x3526070d [0001.878] I> create_pm_ids: id: 2888-0001-400-L, len: 15 [0001.883] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.894] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0001.900] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.911] I> Adding plugin-manager/ids/2888-0001-400=/i2c@3160000:module@0x50 [0001.919] W> "i2c@3160000" doesn't exist, creating [0001.922] W> "module@0x50" doesn't exist, creating [0001.927] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0001.934] W> "module@0x56" doesn't exist, creating [0001.940] I> Adding plugin-manager/cvm [0001.942] W> "chip-id" doesn't exist, creating [0001.946] I> Adding plugin-manager/chip-id/A02 [0001.951] I> Plugin-manager override starting [0001.956] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.964] I> node /plugin-manager/fragement-soft-wdt matches [0001.971] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.976] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.987] I> Disable plugin-manager status in FDT [0001.987] I> Plugin-manager override finished successfully [0001.988] I> gpio framework initialized [0001.993] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.001] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.007] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.015] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.022] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.028] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.034] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.042] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.050] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.056] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.064] I> fixed regulator driver initialized [0002.075] I> register 'maxim' power off handle [0002.076] I> virtual i2c enabled [0002.076] I> registered 'maxim,max20024' pmic [0002.078] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.085] I> Boot-device: eMMC [0002.088] I> Boot_device: SDMMC_BOOT instance: 3 [0002.096] I> sdmmc-3 params source = boot args [0002.097] I> create_pm_ids: id: 2888-0001-400-L, len: 15 [0002.102] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.113] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0002.118] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.129] I> sdmmc bdev is already initialized [0002.133] I> sdmmc-3 params source = boot args [0002.164] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.177] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.186] I> enabling 'vdd-hdmi-5v0' regulator [0002.192] I> regulator 'vdd-hdmi-5v0' already enabled [0002.192] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.193] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.197] E> invalid display type [0002.201] E> invalid display type [0002.203] E> cannot find any other nvdisp nodes [0002.203] E> no valid display unit config found in dtb [0002.204] W> display init failed [0002.205] I> Load in CBoot Boot Options partition and parse it [0002.215] E> Error -9 when finding node with path /boot-configuration [0002.215] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.222] I> Using default boot order [0002.226] I> boot-dev-order :- [0002.229] I> 1.sd [0002.231] I> 2.usb [0002.232] I> 3.nvme [0002.234] I> 4.emmc [0002.236] I> 5.net [0002.238] I> Hit any key to stop autoboot: 4 3 2 1 [0004.246] initializing target [0004.246] calling apps_init() [0004.247] starting app kernel_boot_app [0004.266] I> found decompressor handler: lz4-legacy [0004.267] I> decompressing BMP blob ... [0004.277] I> Kernel type = Normal [0004.278] I> ########## SD (0) boot ########## [0004.278] I> Found sdcard [0004.281] I> enabling 'vdd-sdmmc1-sw' regulator [0004.286] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.534] I> sdmmc SDR mode [0004.548] I> -0 params source = [0004.557] W> Cannot find any partition table for 00060000 [0004.557] I> Detect filesystem [0004.561] I> fs_detect:173: Unsupported or no filesystem present [0004.562] I> Loading kernel-bootctrl from partition [0004.562] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0004.569] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.569] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.578] E> SD boot failed, err: 724238349 [0004.578] I> ########## USB (0) boot ########## [0004.585] W> No valid slot number is found in scratch register [0004.586] W> Return default slot: _a [0004.596] I> Validate XUSB-FW ... [0004.596] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.600] I> Encryption fuse is not ON [0004.602] I> USB Firmware Version: 60.09 release [0004.662] I> regulator of usb2-0 already enabled [0004.670] I> regulator of usb2-1 already enabled [0004.677] I> regulator of usb2-2 already enabled [0004.687] I> enabling 'vdd-5v-sata' regulator [0005.692] E> failed to initialize xhci controller [0005.692] E> Error in init of XUSB host driver, err: 79790026 [0005.693] W> Failed to initialize device 5-0 [0005.693] E> USB boot failed, err: 2037973030 [0005.693] I> ########## NVME (0) boot ########## [0005.694] I> Initializing nvme device instance 0 [0005.694] I> Initializing nvme controller [0005.698] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.704] I> vpcie3v3-supply not found [0005.708] I> vpcie12v-supply not found [0005.712] W> Failed to get nvidia,plat-gpios [0005.716] I> tegrabl_pcie_soc_preinit: (0): [0005.720] I> Unpowergate [0005.722] I> tegrabl_car_clk_disable(0) ... [0005.726] I> tegrabl_car_rst_set(CORE, 0) ... [0005.730] I> tegrabl_car_rst_set(APB, 0) ... [0005.734] I> tegrabl_car_clk_enable(0) ... [0005.738] I> tegrabl_car_rst_clear(APB, 0) ... [0005.743] I> tegrabl_set_ctrl_state(0) [0005.746] I> CLR PCIE_APB:6 [0005.749] I> tegrabl_pcie_soc_init: (0): [0005.753] I> APPL initialization ... [0005.756] I> poweron phys [0005.759] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.765] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.770] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.776] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.781] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0006.886] C> Failed to link up controller-0 [0006.887] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0006.887] I> Failed to initialize SoC Host PCIe controller [0006.888] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0006.888] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0006.889] W> Failed to open NVME-0, err = 80800612 [0006.893] W> Failed to initialize device 10-0 [0006.898] E> NVME (0) boot failed, err: 0x80800612 [0006.902] I> ########## NVME (1) boot ########## [0006.907] I> Initializing nvme device instance 1 [0006.911] I> Initializing nvme controller [0006.915] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.921] I> vpcie3v3-supply not found [0006.925] I> vpcie12v-supply not found [0006.929] W> Failed to get nvidia,plat-gpios [0006.933] I> tegrabl_pcie_soc_preinit: (1): [0006.937] I> Unpowergate [0006.939] I> tegrabl_car_clk_disable(1) ... [0006.943] I> tegrabl_car_rst_set(CORE, 1) ... [0006.947] I> tegrabl_car_rst_set(APB, 1) ... [0006.951] I> tegrabl_car_clk_enable(1) ... [0006.955] I> tegrabl_car_rst_clear(APB, 1) ... [0006.960] I> tegrabl_set_ctrl_state(1) [0006.963] I> CLR PCIE_APB:6 [0006.966] I> tegrabl_pcie_soc_init: (1): [0006.970] I> APPL initialization ... [0006.973] I> poweron phys [0006.976] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.982] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0007.089] I> PCIe controller-1 link is up [0007.089] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0007.089] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0007.090] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0007.090] I> tegra_pcie_bus[1].mem = 0x30200000 [0007.091] I> Scanning busnr: 0 devfn: 0 [0007.091] I> PCIe IDs: 0x1ad210de [0007.094] I> PCIe RID_CC: 0x60400a1 [0007.097] I> Scanning busnr: 1 devfn: 0 [0007.101] I> PCIe IDs: 0x91711b4b [0007.104] I> PCIe RID_CC: 0x1060113 [0007.107] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0007.113] I> IO bar_num=0 bar=0x30100000 [0007.117] I> IO bar_num=1 bar=0x30100008 [0007.120] I> IO bar_num=2 bar=0x30100010 [0007.124] I> IO bar_num=3 bar=0x30100018 [0007.128] I> IO bar_num=4 bar=0x30100020 [0007.132] I> MEM bar_num=5 bar=0x30200000 [0007.136] I> Number of PCIe devices detected: 2 [0007.140] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0007.147] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0007.153] W> Failed to open NVME-1, err = 80800612 [0007.158] W> Failed to initialize device 10-1 [0007.162] E> NVME (1) boot failed, err: 0x80800612 [0007.166] I> ########## NVME (2) boot ########## [0007.171] I> Initializing nvme device instance 2 [0007.175] I> Initializing nvme controller [0007.180] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.186] I> vpcie3v3-supply not found [0007.189] I> vpcie12v-supply not found [0007.193] W> Failed to get nvidia,plat-gpios [0007.197] I> tegrabl_pcie_soc_preinit: (2): [0007.201] I> Unpowergate [0007.203] I> tegrabl_car_clk_disable(2) ... [0007.207] I> tegrabl_car_rst_set(CORE, 2) ... [0007.212] I> tegrabl_car_rst_set(APB, 2) ... [0007.216] I> tegrabl_car_clk_enable(2) ... [0007.220] I> tegrabl_car_rst_clear(APB, 2) ... [0007.224] I> tegrabl_set_ctrl_state(2) [0007.228] I> CLR PCIE_APB:6 [0007.230] I> tegrabl_pcie_soc_init: (2): [0007.234] I> APPL initialization ... [0007.237] I> poweron phys [0007.240] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.246] I> tegrabl_power_on_phy: controller 2 not available [0007.252] E> Failed to power on phy on controller-2 [0007.257] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0007.261] I> Failed to initialize SoC Host PCIe controller [0007.267] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0007.273] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0007.280] W> Failed to open NVME-2, err = 80800601 [0007.284] W> Failed to initialize device 10-2 [0007.288] E> NVME (2) boot failed, err: 0x80800601 [0007.293] I> ########## NVME (3) boot ########## [0007.298] I> Initializing nvme device instance 3 [0007.302] I> Initializing nvme controller [0007.306] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.312] I> vpcie3v3-supply not found [0007.316] I> vpcie12v-supply not found [0007.319] W> Failed to get nvidia,plat-gpios [0007.324] I> tegrabl_pcie_soc_preinit: (3): [0007.328] I> Unpowergate [0007.330] I> tegrabl_car_clk_disable(3) ... [0007.334] I> tegrabl_car_rst_set(CORE, 3) ... [0007.338] I> tegrabl_car_rst_set(APB, 3) ... [0007.342] I> tegrabl_car_clk_enable(3) ... [0007.346] I> tegrabl_car_rst_clear(APB, 3) ... [0007.351] I> tegrabl_set_ctrl_state(3) [0007.354] I> CLR PCIE_APB:6 [0007.357] I> tegrabl_pcie_soc_init: (3): [0007.360] I> APPL initialization ... [0007.364] I> poweron phys [0007.367] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.373] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0008.478] C> Failed to link up controller-3 [0008.479] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.479] I> Failed to initialize SoC Host PCIe controller [0008.480] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0008.480] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.481] W> Failed to open NVME-3, err = 80800612 [0008.485] W> Failed to initialize device 10-3 [0008.489] E> NVME (3) boot failed, err: 0x80800612 [0008.494] I> ########## NVME (4) boot ########## [0008.498] I> Initializing nvme device instance 4 [0008.503] I> Initializing nvme controller [0008.507] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.513] I> vpcie3v3-supply not found [0008.517] I> vpcie12v-supply not found [0008.520] W> Failed to get nvidia,plat-gpios [0008.524] I> tegrabl_pcie_soc_preinit: (4): [0008.528] I> Unpowergate [0008.531] I> tegrabl_car_clk_disable(4) ... [0008.535] I> tegrabl_car_rst_set(CORE, 4) ... [0008.539] I> tegrabl_car_rst_set(APB, 4) ... [0008.543] I> tegrabl_car_clk_enable(4) ... [0008.547] I> tegrabl_car_rst_clear(APB, 4) ... [0008.551] I> tegrabl_set_ctrl_state(4) [0008.555] I> CLR PCIE_APB:6 [0008.558] I> tegrabl_pcie_soc_init: (4): [0008.561] I> APPL initialization ... [0008.565] I> poweron phys [0008.568] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.574] I> tegrabl_power_on_phy: controller 4 not available [0008.579] E> Failed to power on phy on controller-4 [0008.584] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.589] I> Failed to initialize SoC Host PCIe controller [0008.594] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0008.601] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.607] W> Failed to open NVME-4, err = 80800601 [0008.612] W> Failed to initialize device 10-4 [0008.616] E> NVME (4) boot failed, err: 0x80800601 [0008.621] I> ########## NVME (5) boot ########## [0008.625] I> Initializing nvme device instance 5 [0008.630] I> Initializing nvme controller [0008.634] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.640] I> i=0, reg_phandle=0x1b [0008.645] I> reg_voltage=3300000 [0008.646] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0008.658] I> enabling 'vdd-3v3-pcie' regulator [0008.658] I> i=1, reg_phandle=0x1c [0008.663] I> reg_voltage=1200000 [0008.664] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0008.676] I> enabling 'vdd-12v-pcie' regulator [0008.676] I> tegrabl_pcie_soc_preinit: (5): [0008.680] I> Unpowergate [0008.682] I> tegrabl_car_clk_disable(5) ... [0008.686] I> tegrabl_car_rst_set(CORE, 5) ... [0008.690] I> tegrabl_car_rst_set(APB, 5) ... [0008.694] I> tegrabl_car_clk_enable(5) ... [0008.698] I> tegrabl_car_rst_clear(APB, 5) ... [0008.703] I> tegrabl_set_ctrl_state(5) [0008.706] I> CLR PCIE_APB:6 [0008.709] I> tegrabl_pcie_soc_init: (5): [0008.713] I> APPL initialization ... [0008.716] I> poweron phys [0008.719] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.725] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0008.730] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0008.736] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0008.741] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0008.746] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0008.752] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0008.757] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0008.762] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0009.868] C> Failed to link up controller-5 [0009.868] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.869] I> Failed to initialize SoC Host PCIe controller [0009.869] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0009.870] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.870] W> Failed to open NVME-5, err = 80800612 [0009.875] W> Failed to initialize device 10-5 [0009.879] E> NVME (5) boot failed, err: 0x80800612 [0009.883] I> ########## Fixed storage boot ########## [0009.888] I> Loading kernel-bootctrl from partition [0009.893] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0009.906] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0009.907] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0009.914] I> Already published: 00010003 [0009.918] I> Look for boot partition [0009.921] I> Fallback: assuming 0th partition is boot partition [0009.927] I> Detect filesystem [0009.954] I> Loading extlinux.conf ... [0009.954] I> Loading extlinux.conf binary from rootfs ... [0009.955] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0010.010] I> Loading extlinux.conf sig file from rootfs ... [0010.010] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0010.047] I> Validate extlinux.conf ... [0010.047] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0010.048] I> Encryption fuse is not ON [0010.048] I> L4T boot options [0010.048] I> [1]: "primary kernel" [0010.049] I> Enter choice: [0013.050] I> Continuing with default option: 1 [0013.050] I> Loading kernel ... [0013.050] I> Loading kernel binary from rootfs ... [0013.051] I> rootfs path: /sdmmc_user/boot/Image [0013.286] I> Loading kernel sig file from rootfs ... [0013.286] I> rootfs path: /sdmmc_user/boot/Image.sig [0013.317] I> overload load_size to 34484232 (from 34484240) [0013.317] I> Validate kernel ... [0013.317] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0013.631] I> Encryption fuse is not ON [0013.663] I> Loading kernel-dtb ... [0013.663] I> No kernel-dtb binary path [0013.663] I> Continue to load from partition ... [0013.664] W> No valid slot number is found in scratch register [0013.664] W> Return default slot: _a [0013.664] I> A/B: bin_type (38) slot 0 [0013.665] I> Loading kernel-dtb from partition [0013.666] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0013.681] I> Validate kernel-dtb ... [0013.681] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0013.686] I> Encryption fuse is not ON [0013.688] I> Loading ramdisk from rootfs ... [0013.691] I> Loading ramdisk binary from rootfs ... [0013.695] I> rootfs path: /sdmmc_user/boot/initrd [0013.770] I> Loading ramdisk sig file from rootfs ... [0013.771] I> rootfs path: /sdmmc_user/boot/initrd.sig [0013.795] I> overload load_size to 7238344 (from 7238352) [0013.796] I> Validate ramdisk ... [0013.796] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0013.862] I> Encryption fuse is not ON [0013.876] I> Kernel hdr @0xa42d0000 [0013.876] I> Kernel dtb @0x90000000 [0013.876] I> decompressor handler not found [0013.877] I> Copying kernel image (34484232 bytes) from 0xa42d0000 to 0x80080000 ... [0013.887] I> Done [0013.888] I> Updated bpmp info to DTB [0013.889] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0013.890] I> Updated initrd info to DTB [0013.890] W> WARN: Fail to override "console=none" in commandline [0013.890] I> Active rootfs suffix: [0013.892] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0013.900] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0013.907] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0013.914] W> No valid slot number is found in scratch register [0013.920] W> Return default slot: _a [0013.923] I> Active slot suffix: [0013.926] I> add_boot_slot_suffix: slot_suffix = [0013.931] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0013.955] I> Updated bootarg info to DTB [0013.959] W> MAC addr invalid! [0013.962] E> Failed to get WIFI MAC address [0013.966] W> MAC addr invalid! [0013.969] E> Failed to get Bluetooth MAC address [0013.973] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:cc:29:2b [0013.980] W> "plugin-manager" doesn't exist, creating [0013.984] I> Adding /chosen/plugin-manager/cvm [0013.989] W> "chip-id" doesn't exist, creating [0013.993] I> Adding /chosen/plugin-manager/chip-id [0013.998] W> "configs" doesn't exist, creating [0014.002] I> Adding /chosen/plugin-manager/configs [0014.006] W> "ids" doesn't exist, creating [0014.010] I> Adding /chosen/plugin-manager/ids [0014.015] W> "odm-data" doesn't exist, creating [0014.019] I> Adding /chosen/plugin-manager/odm-data [0014.027] W> "memory" doesn't exist, creating [0014.028] I> [0] START: 0x80000000, END: 0xac000000 [0014.033] I> [1] START: 0xac004000, END: 0xf0ad0000 [0014.037] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0014.042] I> dram_block larger than 80000000 [0014.046] I> [3] START: 0x100000000, END: 0x480000000 [0014.051] I> added [base:0x80000000, size:0x2c000000] to /memory [0014.057] I> added [base:0xac200000, size:0x44800000] to /memory [0014.063] I> added [base:0x100000000, size:0x380000000] to /memory [0014.070] I> Updated memory info to DTB [0014.073] E> add_disp_param: failed to get display params for du=0 [0014.079] W> "reset" doesn't exist, creating [0014.083] I> Adding ecid(00000001645995822400000009ff8180) to DT [0014.089] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0014.093] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0014.098] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0014.103] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0014.107] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0014.112] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0014.117] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0014.122] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0014.127] W> "misc-data" doesn't exist, creating [0014.131] I> Boot-device: eMMC [0014.134] I> Add boot-sdmmc to plugin-manager/misc-data [0014.139] I> Add storage-sdmmc to plugin-manager/misc-data [0014.144] W> Unknown storage device [0014.148] I> Add serial number:0421019009479 as DT property [0014.154] I> Plugin-manager override starting [0014.158] I> node /plugin-manager/fragement-tegra-wdt-en matches [0014.165] I> node /plugin-manager/fragement-soft-wdt matches [0014.172] I> node /plugin-manager/fragment-pcie-c5-rp matches [0014.176] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0014.188] I> Disable plugin-manager status in FDT [0014.189] I> Plugin-manager override finished successfully [0014.191] I> tegrabl_load_kernel_and_dtb: Done [0014.195] E> tegrabl_display_clear: display is not initialized [0014.200] W> Boot logo display failed... [0014.204] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 6.347777] cgroup: cgroup2: unknown option "nsdelegate" [ 7.508910] using random self ethernet address [ 7.509022] using random host ethernet address [ 7.746394] random: crng init done [ 7.746498] random: 7 urandom warning(s) missed due to ratelimiting [ 8.070050] using random self ethernet address [ 8.070164] using random host ethernet address [ 10.488596] Bridge firewalling registered Ubuntu 18.04.6 LTS xavier ttyTCU0 xavier login: cdleml Password: tput: No value for $TERM and no -T specified tput: No value for $TERM and no -T specified tput: No value for $TERM and no -T specified tput: No value for $TERM and no -T specified Welcome to NVIDIA Jetson Xavier AGX Ubuntu 18.04.6 LTS (GNU/Linux 4.9.253-tegra aarch64) ------------------------------------------------------------ - NVIDIA Jetson AGX Xavier [16GB] * Jetpack 4.6 [L4T 32.6.1] * NV Power Mode: MAXN - Type: 0 * jetson_stats.service: active - Libraries: * CUDA: 10.2.300 * cuDNN: 8.2.1.32 * TensorRT: 8.0.1.6 * Visionworks: 1.6.0.501 * OpenCV: 4.1.1 compiled CUDA: NO * VPI: ii libnvvpi1 1.1.15 arm64 NVIDIA Vision Programming Interface library * Vulkan: 1.2.70 ------------------------------------------------------------ Mounted on Size Avail Use% /media/cdleml/128GB 117G 807M 100% / 28G 15G 45% ------------------------------------------------------------ cdleml@xavier:~$ docker start -i pysot root@13e5c5fc5b4d:/# cd /home/pysot/experiments/siamrpn_mobilev2_l234_dwxcorr/ ../../tools/test.py --snapshot model.pth --config config.yaml --dataset VOT2018 loading VOT2018: 100%|##################################| 60/60 [00:02<00:00, 29.01it/s, zebrafish1] �� [0000.425] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.434] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.439] I> Boot-mode: Coldboot [0000.442] I> Chip revision : A02 [0000.445] I> Bootrom patch version : 15 (correctly patched) [0000.450] I> ATE fuse revision : 0x200 [0000.454] I> Ram repair fuse : 0x0 [0000.457] I> Ram Code : 0x0 [0000.459] I> rst_source : 0x0 [0000.462] I> rst_level : 0x0 [0000.466] I> Boot-device: eMMC [0000.481] I> sdmmc DDR50 mode [0000.485] W> No valid slot number is found in scratch register [0000.490] W> Return default slot: _a [0000.493] I> Active Boot chain : 0 [0000.497] I> Boot-device: eMMC [0000.500] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.508] I> Temperature = 25000 [0000.511] W> Skipping boost for clk: BPMP_CPU_NIC [0000.515] W> Skipping boost for clk: BPMP_APB [0000.519] W> Skipping boost for clk: AXI_CBB [0000.523] W> Skipping boost for clk: AON_CPU_NIC [0000.528] W> Skipping boost for clk: CAN1 [0000.531] W> Skipping boost for clk: CAN2 [0000.536] I> Boot-device: eMMC [0000.539] I> Boot-device: eMMC [0000.548] I> Sdmmc: HS400 mode enabled [0000.552] I> ECC region[0]: Start:0x0, End:0x0 [0000.557] I> ECC region[1]: Start:0x0, End:0x0 [0000.561] I> ECC region[2]: Start:0x0, End:0x0 [0000.565] I> ECC region[3]: Start:0x0, End:0x0 [0000.569] I> ECC region[4]: Start:0x0, End:0x0 [0000.573] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.579] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.583] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.588] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.592] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.598] E> FAILED: Thermal config [0000.605] E> FAILED: MEMIO rail config [0000.618] I> Boot-device: eMMC [0000.627] I> sdmmc bdev is already initialized [0000.700] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.708] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.709] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.709] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.710] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.716] W> device prod register failed [0000.720] I> Boot-device: eMMC [0000.723] I> Boot_device: SDMMC_BOOT instance: 3 [0000.728] I> sdmmc-3 params source = boot args [0000.731] I> sdmmc bdev is already initialized [0000.736] I> sdmmc-3 params source = boot args [0000.744] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.751] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.752] W> No valid slot number is found in scratch register [0000.757] W> Return default slot: _a [0000.760] I> Active Boot chain : 0 [0000.765] I> parsing oem signed section of bpmp-fw header done [0000.769] I> bpmp-fw binary init read from storage [0000.774] I> oem authentication of bpmp-fw header done [0000.780] I> bpmp-fw binary done read from storage [0000.783] I> bpmp-fw: Authentication init Done [0000.788] I> parsing oem signed section of cpubl header done [0000.793] I> cpubl binary init read from storage [0000.797] I> bpmp-fw: Authentication Finalize Done [0000.802] I> oem authentication of cpubl header done [0000.807] I> cpubl binary done read from storage [0000.811] I> cpubl: Authentication init Done [0000.816] I> parsing oem signed section of rce header done [0000.821] I> rce binary init read from storage [0000.825] I> Relocating BR-BCT [0000.828] I> cpubl: Authentication Finalize Done [0000.833] I> oem authentication of rce header done [0000.837] I> rce binary done read from storage [0000.841] I> rce: Authentication init Done [0000.846] I> parsing oem signed section of ape header done [0000.851] I> ape binary init read from storage [0000.855] I> rce: Authentication Finalize Done [0000.860] I> oem authentication of ape header done [0000.864] I> ape binary done read from storage [0000.868] I> ape: Authentication init Done [0000.874] I> parsing oem signed section of tos header done [0000.878] I> tos binary init read from storage [0000.882] I> ape: Authentication Finalize Done [0000.887] I> oem authentication of tos header done [0000.891] I> tos binary done read from storage [0000.895] I> tos: Authentication init Done [0000.899] I> parsing oem signed section of bpmp-fw-dtb header done [0000.905] I> bpmp-fw-dtb binary init read from storage [0000.910] I> tos: Authentication Finalize Done [0000.916] I> oem authentication of bpmp-fw-dtb header done [0000.922] I> bpmp-fw-dtb binary done read from storage [0000.925] I> bpmp-fw-dtb: Authentication init Done [0000.929] I> parsing oem signed section of cpubl-dtb header done [0000.935] I> cpubl-dtb binary init read from storage [0000.940] I> bpmp-fw-dtb: Authentication Finalize Done [0000.978] I> oem authentication of cpubl-dtb header done [0000.979] I> cpubl-dtb binary done read from storage [0000.979] I> cpubl-dtb: Authentication init Done [0000.981] I> parsing oem signed section of eks header done [0000.982] I> eks binary init read from storage [0000.982] I> cpubl-dtb: Authentication Finalize Done [0000.983] I> oem authentication of eks header done [0000.987] I> eks binary done read from storage [0000.991] I> eks: Authentication init Done [0000.995] I> eks: Authentication Finalize Done [0000.999] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.467] I> Welcome to Cboot ��fmon_post initialized ��[0001.468] I> Cboot Version: t194-cfa2bc91 [0001.468] I> CPU-BL Params @ 0xf2820000 [0001.468] I> 0) Base:0x00000000 Size:0x00000000 [0001.472] I> 1) Base:0xf1100000 Size:0x00100000 [0001.476] I> 2) Base:0xf2000000 Size:0x00200000 [0001.481] I> 3) Base:0xf1200000 Size:0x00200000 [0001.485] I> 4) Base:0xf1000000 Size:0x00100000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.490] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.569] I> 6) Base:0xf3800000 Size:0x00400000 [0001.574] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.578] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.583] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.587] I> 10) Base:0xf3000000 Size:0x00800000 [0001.592] I> 11) Base:0x40000000 Size:0x00040000 [0001.596] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.600] I> 13) Base:0x40046000 Size:0x00002000 [0001.605] I> 14) Base:0x40048000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� [0001.614] I> 15) Base:0xac000000 Size:0x00004000 ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.619] I> 16) Base:0x4004a000 Size:0x00002000 [0001.669] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.674] I> 18) Base:0x4004c000 Size:0x00002000 [0001.678] I> 19) Base:0xf2200000 Size:0x00600000 [0001.682] I> 20) Base:0x4004e000 Size:0x00002000 [0001.687] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.691] I> 22) Base:0x00000000 Size:0x00000000 [0001.696] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.700] I> 24) Base:0xf6000000 Size:0x02000000 [0001.705] I> 25) Base:0x40050000 Size:0x00002000 [0001.709] I> 26) Base:0x40040000 Size:0x00006000 [0001.714] I> 27) Base:0xf1800000 Size:0x00400000 [0001.718] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.723] I> 29) Base:0xf1400000 Size:0x00400000 [0001.727] I> 30) Base:0x00000000 Size:0x00000000 [0001.732] I> 31) Base:0x00000000 Size:0x00000000 [0001.736] I> 32) Base:0xf8000000 Size:0x08000000 [0001.740] I> 33) Base:0x00000000 Size:0x00000000 [0001.745] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.749] I> 35) Base:0xab000000 Size:0x01000000 [0001.754] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.758] I> 37) Base:0xf2800000 Size:0x00800000 [0001.763] I> 38) Base:0x80000000 Size:0x20000000 [0001.767] I> 39) Base:0xb0000000 Size:0x08000000 [0001.772] I> 40) Base:0x00000000 Size:0x00000000 [0001.776] I> 41) Base:0x00000000 Size:0x00000000 [0001.781] I> 42) Base:0x00000000 Size:0x00000000 [0001.785] I> 43) Base:0x00000000 Size:0x00000000 [0001.790] I> 44) Base:0x00000000 Size:0x00000000 [0001.794] I> 45) Base:0x00000000 Size:0x00000000 [0001.798] GIC-SPI Target CPU: 0 [0001.801] Interrupts Init done [0001.804] calling constructors [0001.807] initializing heap [0001.810] I> Heap: [0xa0699b80 ... 0xab000000] [0001.814] initializing threads [0001.817] initializing timers [0001.820] creating bootstrap completion thread [0001.824] top of bootstrap2() [0001.827] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.832] initializing platform [0001.835] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.840] W> device prod register failed [0001.844] I> Bl_dtb @0xaaf00000 [0001.850] W> "plugin-manager" doesn't exist, creating [0001.852] W> "ids" doesn't exist, creating [0001.856] W> "connection" doesn't exist, creating [0001.860] W> "configs" doesn't exist, creating [0001.872] E> failed to read label property for node 227172: 13 [0001.875] E> failed to read reg property for node 227260: 13 [0001.878] E> failed to read label property for node 227312: 13 [0001.882] E> failed to read label property for node 227380: 13 [0001.888] E> failed to read label property for node 227416: 13 [0001.894] E> failed to read label property for node 227452: 13 [0001.899] E> failed to read reg property for node 227520: 13 [0001.905] E> failed to read label property for node 227572: 13 [0001.911] I> Find /i2c@3160000's alias i2c0 [0001.914] I> Reading eeprom i2c=0 address=0x50 [0001.943] I> Device at /i2c@3160000:0x50 [0001.943] I> Reading eeprom i2c=0 address=0x56 [0001.968] I> Device at /i2c@3160000:0x56 [0001.969] I> Find /i2c@3180000's alias i2c2 [0001.969] I> Reading eeprom i2c=2 address=0x54 [0001.971] E> I2C: slave not found in slaves. [0001.971] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.972] E> I2C_DEV: Failed to send register address 0x00000000. [0001.973] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.982] E> eeprom: Failed to read I2C slave device [0001.987] I> Eeprom read failed 0x3526070d [0001.991] I> Reading eeprom i2c=2 address=0x57 [0001.995] E> I2C: slave not found in slaves. [0001.999] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.007] E> I2C_DEV: Failed to send register address 0x00000000. [0002.012] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.022] E> eeprom: Failed to read I2C slave device [0002.027] I> Eeprom read failed 0x3526070d [0002.031] I> Reading eeprom i2c=2 address=0x52 [0002.035] E> I2C: slave not found in slaves. [0002.039] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.047] E> I2C_DEV: Failed to send register address 0x00000000. [0002.052] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0002.062] E> eeprom: Failed to read I2C slave device [0002.067] I> Eeprom read failed 0x3526070d [0002.072] I> Find /i2c@c240000's alias i2c1 [0002.075] I> Reading eeprom i2c=1 address=0x52 [0002.080] E> I2C: slave not found in slaves. [0002.083] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.091] E> I2C_DEV: Failed to send register address 0x00000000. [0002.097] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.106] E> eeprom: Retry to read I2C slave device. [0002.111] E> I2C: slave not found in slaves. [0002.115] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.123] E> I2C_DEV: Failed to send register address 0x00000000. [0002.128] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.138] E> eeprom: Failed to read I2C slave device [0002.143] I> Eeprom read failed 0x3526070d [0002.147] I> Reading eeprom i2c=1 address=0x50 [0002.151] E> I2C: slave not found in slaves. [0002.155] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.163] E> I2C_DEV: Failed to send register address 0x00000000. [0002.168] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.178] E> eeprom: Retry to read I2C slave device. [0002.183] E> I2C: slave not found in slaves. [0002.187] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.195] E> I2C_DEV: Failed to send register address 0x00000000. [0002.200] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.210] E> eeprom: Failed to read I2C slave device [0002.215] I> Eeprom read failed 0x3526070d [0002.219] I> create_pm_ids: id: 2888-0001-400-L, len: 15 [0002.224] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.235] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0002.240] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.251] I> Adding plugin-manager/ids/2888-0001-400=/i2c@3160000:module@0x50 [0002.259] W> "i2c@3160000" doesn't exist, creating [0002.263] W> "module@0x50" doesn't exist, creating [0002.268] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0002.274] W> "module@0x56" doesn't exist, creating [0002.280] I> Adding plugin-manager/cvm [0002.283] W> "chip-id" doesn't exist, creating [0002.287] I> Adding plugin-manager/chip-id/A02 [0002.291] I> Plugin-manager override starting [0002.296] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.304] I> node /plugin-manager/fragement-soft-wdt matches [0002.312] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.315] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.327] I> Disable plugin-manager status in FDT [0002.327] I> Plugin-manager override finished successfully [0002.328] I> gpio framework initialized [0002.333] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.340] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.347] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.354] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.362] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.369] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.375] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.382] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.390] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.397] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.404] I> fixed regulator driver initialized [0002.416] I> register 'maxim' power off handle [0002.417] I> virtual i2c enabled [0002.417] I> registered 'maxim,max20024' pmic [0002.419] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.425] I> Boot-device: eMMC [0002.428] I> Boot_device: SDMMC_BOOT instance: 3 [0002.437] I> sdmmc-3 params source = boot args [0002.437] I> create_pm_ids: id: 2888-0001-400-L, len: 15 [0002.442] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.453] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0002.458] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.469] I> sdmmc bdev is already initialized [0002.474] I> sdmmc-3 params source = boot args [0002.504] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.517] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.528] I> enabling 'vdd-hdmi-5v0' regulator [0002.533] I> regulator 'vdd-hdmi-5v0' already enabled [0002.533] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.534] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.538] E> invalid display type [0002.542] E> invalid display type [0002.543] E> cannot find any other nvdisp nodes [0002.543] E> no valid display unit config found in dtb [0002.544] W> display init failed [0002.545] I> Load in CBoot Boot Options partition and parse it [0002.556] E> Error -9 when finding node with path /boot-configuration [0002.556] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.563] I> Using default boot order [0002.567] I> boot-dev-order :- [0002.570] I> 1.sd [0002.571] I> 2.usb [0002.573] I> 3.nvme [0002.575] I> 4.emmc [0002.577] I> 5.net [0002.579] I> Hit any key to stop autoboot: 4 3 2 1 [0004.587] initializing target [0004.587] calling apps_init() [0004.588] starting app kernel_boot_app [0004.607] I> found decompressor handler: lz4-legacy [0004.608] I> decompressing BMP blob ... [0004.619] I> Kernel type = Normal [0004.619] I> ########## SD (0) boot ########## [0004.620] I> Found sdcard [0004.622] I> enabling 'vdd-sdmmc1-sw' regulator [0004.627] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.863] I> sdmmc SDR mode [0004.878] I> -0 params source = [0004.886] W> Cannot find any partition table for 00060000 [0004.887] I> Detect filesystem [0004.891] I> fs_detect:173: Unsupported or no filesystem present [0004.891] I> Loading kernel-bootctrl from partition [0004.892] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0004.898] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.899] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.907] E> SD boot failed, err: 724238349 [0004.907] I> ########## USB (0) boot ########## [0004.914] W> No valid slot number is found in scratch register [0004.915] W> Return default slot: _a [0004.925] I> Validate XUSB-FW ... [0004.925] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.929] I> Encryption fuse is not ON [0004.932] I> USB Firmware Version: 60.09 release [0004.991] I> regulator of usb2-0 already enabled [0004.997] I> regulator of usb2-1 already enabled [0005.003] I> regulator of usb2-2 already enabled [0005.010] I> enabling 'vdd-5v-sata' regulator [0006.014] E> failed to initialize xhci controller [0006.015] E> Error in init of XUSB host driver, err: 79790026 [0006.015] W> Failed to initialize device 5-0 [0006.016] E> USB boot failed, err: 2037973030 [0006.016] I> ########## NVME (0) boot ########## [0006.016] I> Initializing nvme device instance 0 [0006.017] I> Initializing nvme controller [0006.021] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0006.027] I> vpcie3v3-supply not found [0006.031] I> vpcie12v-supply not found [0006.034] W> Failed to get nvidia,plat-gpios [0006.038] I> tegrabl_pcie_soc_preinit: (0): [0006.042] I> Unpowergate [0006.045] I> tegrabl_car_clk_disable(0) ... [0006.049] I> tegrabl_car_rst_set(CORE, 0) ... [0006.053] I> tegrabl_car_rst_set(APB, 0) ... [0006.057] I> tegrabl_car_clk_enable(0) ... [0006.061] I> tegrabl_car_rst_clear(APB, 0) ... [0006.065] I> tegrabl_set_ctrl_state(0) [0006.069] I> CLR PCIE_APB:6 [0006.072] I> tegrabl_pcie_soc_init: (0): [0006.075] I> APPL initialization ... [0006.079] I> poweron phys [0006.081] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0006.088] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0006.093] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0006.098] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0006.104] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0007.209] C> Failed to link up controller-0 [0007.210] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0007.210] I> Failed to initialize SoC Host PCIe controller [0007.210] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0007.211] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0007.211] W> Failed to open NVME-0, err = 80800612 [0007.216] W> Failed to initialize device 10-0 [0007.220] E> NVME (0) boot failed, err: 0x80800612 [0007.225] I> ########## NVME (1) boot ########## [0007.229] I> Initializing nvme device instance 1 [0007.234] I> Initializing nvme controller [0007.238] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0007.244] I> vpcie3v3-supply not found [0007.248] I> vpcie12v-supply not found [0007.251] W> Failed to get nvidia,plat-gpios [0007.255] I> tegrabl_pcie_soc_preinit: (1): [0007.259] I> Unpowergate [0007.262] I> tegrabl_car_clk_disable(1) ... [0007.266] I> tegrabl_car_rst_set(CORE, 1) ... [0007.270] I> tegrabl_car_rst_set(APB, 1) ... [0007.274] I> tegrabl_car_clk_enable(1) ... [0007.278] I> tegrabl_car_rst_clear(APB, 1) ... [0007.282] I> tegrabl_set_ctrl_state(1) [0007.286] I> CLR PCIE_APB:6 [0007.289] I> tegrabl_pcie_soc_init: (1): [0007.292] I> APPL initialization ... [0007.296] I> poweron phys [0007.298] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0007.304] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0007.411] I> PCIe controller-1 link is up [0007.412] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0007.412] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0007.412] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0007.413] I> tegra_pcie_bus[1].mem = 0x30200000 [0007.413] I> Scanning busnr: 0 devfn: 0 [0007.413] I> PCIe IDs: 0x1ad210de [0007.417] I> PCIe RID_CC: 0x60400a1 [0007.420] I> Scanning busnr: 1 devfn: 0 [0007.424] I> PCIe IDs: 0x91711b4b [0007.427] I> PCIe RID_CC: 0x1060113 [0007.430] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0007.435] I> IO bar_num=0 bar=0x30100000 [0007.439] I> IO bar_num=1 bar=0x30100008 [0007.443] I> IO bar_num=2 bar=0x30100010 [0007.447] I> IO bar_num=3 bar=0x30100018 [0007.450] I> IO bar_num=4 bar=0x30100020 [0007.454] I> MEM bar_num=5 bar=0x30200000 [0007.458] I> Number of PCIe devices detected: 2 [0007.462] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0007.469] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0007.476] W> Failed to open NVME-1, err = 80800612 [0007.480] W> Failed to initialize device 10-1 [0007.484] E> NVME (1) boot failed, err: 0x80800612 [0007.489] I> ########## NVME (2) boot ########## [0007.494] I> Initializing nvme device instance 2 [0007.498] I> Initializing nvme controller [0007.502] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.508] I> vpcie3v3-supply not found [0007.512] I> vpcie12v-supply not found [0007.515] W> Failed to get nvidia,plat-gpios [0007.519] I> tegrabl_pcie_soc_preinit: (2): [0007.524] I> Unpowergate [0007.526] I> tegrabl_car_clk_disable(2) ... [0007.530] I> tegrabl_car_rst_set(CORE, 2) ... [0007.534] I> tegrabl_car_rst_set(APB, 2) ... [0007.538] I> tegrabl_car_clk_enable(2) ... [0007.542] I> tegrabl_car_rst_clear(APB, 2) ... [0007.547] I> tegrabl_set_ctrl_state(2) [0007.550] I> CLR PCIE_APB:6 [0007.553] I> tegrabl_pcie_soc_init: (2): [0007.556] I> APPL initialization ... [0007.560] I> poweron phys [0007.563] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.569] I> tegrabl_power_on_phy: controller 2 not available [0007.574] E> Failed to power on phy on controller-2 [0007.579] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0007.584] I> Failed to initialize SoC Host PCIe controller [0007.589] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0007.596] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0007.602] W> Failed to open NVME-2, err = 80800601 [0007.607] W> Failed to initialize device 10-2 [0007.611] E> NVME (2) boot failed, err: 0x80800601 [0007.616] I> ########## NVME (3) boot ########## [0007.620] I> Initializing nvme device instance 3 [0007.625] I> Initializing nvme controller [0007.629] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.635] I> vpcie3v3-supply not found [0007.638] I> vpcie12v-supply not found [0007.642] W> Failed to get nvidia,plat-gpios [0007.646] I> tegrabl_pcie_soc_preinit: (3): [0007.650] I> Unpowergate [0007.653] I> tegrabl_car_clk_disable(3) ... [0007.657] I> tegrabl_car_rst_set(CORE, 3) ... [0007.661] I> tegrabl_car_rst_set(APB, 3) ... [0007.665] I> tegrabl_car_clk_enable(3) ... [0007.669] I> tegrabl_car_rst_clear(APB, 3) ... [0007.673] I> tegrabl_set_ctrl_state(3) [0007.677] I> CLR PCIE_APB:6 [0007.679] I> tegrabl_pcie_soc_init: (3): [0007.683] I> APPL initialization ... [0007.686] I> poweron phys [0007.689] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.695] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0008.801] C> Failed to link up controller-3 [0008.801] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.802] I> Failed to initialize SoC Host PCIe controller [0008.802] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0008.803] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.803] W> Failed to open NVME-3, err = 80800612 [0008.808] W> Failed to initialize device 10-3 [0008.812] E> NVME (3) boot failed, err: 0x80800612 [0008.817] I> ########## NVME (4) boot ########## [0008.821] I> Initializing nvme device instance 4 [0008.825] I> Initializing nvme controller [0008.830] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.836] I> vpcie3v3-supply not found [0008.839] I> vpcie12v-supply not found [0008.843] W> Failed to get nvidia,plat-gpios [0008.847] I> tegrabl_pcie_soc_preinit: (4): [0008.851] I> Unpowergate [0008.854] I> tegrabl_car_clk_disable(4) ... [0008.857] I> tegrabl_car_rst_set(CORE, 4) ... [0008.862] I> tegrabl_car_rst_set(APB, 4) ... [0008.866] I> tegrabl_car_clk_enable(4) ... [0008.870] I> tegrabl_car_rst_clear(APB, 4) ... [0008.874] I> tegrabl_set_ctrl_state(4) [0008.878] I> CLR PCIE_APB:6 [0008.880] I> tegrabl_pcie_soc_init: (4): [0008.884] I> APPL initialization ... [0008.887] I> poweron phys [0008.890] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.896] I> tegrabl_power_on_phy: controller 4 not available [0008.902] E> Failed to power on phy on controller-4 [0008.907] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.911] I> Failed to initialize SoC Host PCIe controller [0008.917] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0008.923] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.930] W> Failed to open NVME-4, err = 80800601 [0008.934] W> Failed to initialize device 10-4 [0008.939] E> NVME (4) boot failed, err: 0x80800601 [0008.943] I> ########## NVME (5) boot ########## [0008.948] I> Initializing nvme device instance 5 [0008.952] I> Initializing nvme controller [0008.956] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.962] I> i=0, reg_phandle=0x1b [0008.967] I> reg_voltage=3300000 [0008.969] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0008.980] I> enabling 'vdd-3v3-pcie' regulator [0008.980] I> i=1, reg_phandle=0x1c [0008.985] I> reg_voltage=1200000 [0008.987] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0008.998] I> enabling 'vdd-12v-pcie' regulator [0008.998] I> tegrabl_pcie_soc_preinit: (5): [0009.002] I> Unpowergate [0009.005] I> tegrabl_car_clk_disable(5) ... [0009.009] I> tegrabl_car_rst_set(CORE, 5) ... [0009.013] I> tegrabl_car_rst_set(APB, 5) ... [0009.017] I> tegrabl_car_clk_enable(5) ... [0009.021] I> tegrabl_car_rst_clear(APB, 5) ... [0009.025] I> tegrabl_set_ctrl_state(5) [0009.029] I> CLR PCIE_APB:6 [0009.032] I> tegrabl_pcie_soc_init: (5): [0009.035] I> APPL initialization ... [0009.039] I> poweron phys [0009.041] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.047] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0009.053] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0009.058] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0009.063] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0009.069] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0009.074] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0009.080] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0009.085] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0010.190] C> Failed to link up controller-5 [0010.191] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0010.191] I> Failed to initialize SoC Host PCIe controller [0010.192] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0010.192] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0010.193] W> Failed to open NVME-5, err = 80800612 [0010.197] W> Failed to initialize device 10-5 [0010.201] E> NVME (5) boot failed, err: 0x80800612 [0010.206] I> ########## Fixed storage boot ########## [0010.211] I> Loading kernel-bootctrl from partition [0010.216] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0010.229] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0010.230] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0010.237] I> Already published: 00010003 [0010.240] I> Look for boot partition [0010.244] I> Fallback: assuming 0th partition is boot partition [0010.250] I> Detect filesystem [0010.277] I> Loading extlinux.conf ... [0010.277] I> Loading extlinux.conf binary from rootfs ... [0010.277] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0010.332] I> Loading extlinux.conf sig file from rootfs ... [0010.333] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0010.369] I> Validate extlinux.conf ... [0010.370] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0010.370] I> Encryption fuse is not ON [0010.371] I> L4T boot options [0010.371] I> [1]: "primary kernel" [0010.371] I> Enter choice: [0013.372] I> Continuing with default option: 1 [0013.372] I> Loading kernel ... [0013.372] I> Loading kernel binary from rootfs ... [0013.373] I> rootfs path: /sdmmc_user/boot/Image [0013.608] I> Loading kernel sig file from rootfs ... [0013.608] I> rootfs path: /sdmmc_user/boot/Image.sig [0013.639] I> overload load_size to 34484232 (from 34484240) [0013.639] I> Validate kernel ... [0013.640] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0013.954] I> Encryption fuse is not ON [0013.995] I> Loading kernel-dtb ... [0013.996] I> No kernel-dtb binary path [0013.996] I> Continue to load from partition ... [0013.996] W> No valid slot number is found in scratch register [0013.997] W> Return default slot: _a [0013.997] I> A/B: bin_type (38) slot 0 [0013.997] I> Loading kernel-dtb from partition [0013.999] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0014.014] I> Validate kernel-dtb ... [0014.014] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0014.018] I> Encryption fuse is not ON [0014.021] I> Loading ramdisk from rootfs ... [0014.023] I> Loading ramdisk binary from rootfs ... [0014.028] I> rootfs path: /sdmmc_user/boot/initrd [0014.103] I> Loading ramdisk sig file from rootfs ... [0014.103] I> rootfs path: /sdmmc_user/boot/initrd.sig [0014.128] I> overload load_size to 7238344 (from 7238352) [0014.128] I> Validate ramdisk ... [0014.128] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0014.195] I> Encryption fuse is not ON [0014.227] I> Kernel hdr @0xa42d0000 [0014.228] I> Kernel dtb @0x90000000 [0014.228] I> decompressor handler not found [0014.228] I> Copying kernel image (34484232 bytes) from 0xa42d0000 to 0x80080000 ... [0014.245] I> Done [0014.246] I> Updated bpmp info to DTB [0014.247] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0014.248] I> Updated initrd info to DTB [0014.248] W> WARN: Fail to override "console=none" in commandline [0014.248] I> Active rootfs suffix: [0014.249] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0014.251] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0014.258] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0014.265] W> No valid slot number is found in scratch register [0014.271] W> Return default slot: _a [0014.275] I> Active slot suffix: [0014.278] I> add_boot_slot_suffix: slot_suffix = [0014.282] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0014.307] I> Updated bootarg info to DTB [0014.310] W> MAC addr invalid! [0014.313] E> Failed to get WIFI MAC address [0014.317] W> MAC addr invalid! [0014.320] E> Failed to get Bluetooth MAC address [0014.325] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:cc:29:2b [0014.331] W> "plugin-manager" doesn't exist, creating [0014.336] I> Adding /chosen/plugin-manager/cvm [0014.340] W> "chip-id" doesn't exist, creating [0014.344] I> Adding /chosen/plugin-manager/chip-id [0014.349] W> "configs" doesn't exist, creating [0014.353] I> Adding /chosen/plugin-manager/configs [0014.358] W> "ids" doesn't exist, creating [0014.362] I> Adding /chosen/plugin-manager/ids [0014.366] W> "odm-data" doesn't exist, creating [0014.370] I> Adding /chosen/plugin-manager/odm-data [0014.378] W> "memory" doesn't exist, creating [0014.380] I> [0] START: 0x80000000, END: 0xac000000 [0014.384] I> [1] START: 0xac004000, END: 0xf0ad0000 [0014.389] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0014.393] I> dram_block larger than 80000000 [0014.398] I> [3] START: 0x100000000, END: 0x480000000 [0014.402] I> added [base:0x80000000, size:0x2c000000] to /memory [0014.408] I> added [base:0xac200000, size:0x44800000] to /memory [0014.414] I> added [base:0x100000000, size:0x380000000] to /memory [0014.421] I> Updated memory info to DTB [0014.424] E> add_disp_param: failed to get display params for du=0 [0014.430] W> "reset" doesn't exist, creating [0014.435] I> Adding ecid(00000001645995822400000009ff8180) to DT [0014.440] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0014.445] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0014.449] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0014.454] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0014.459] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0014.464] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0014.468] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0014.473] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0014.479] W> "misc-data" doesn't exist, creating [0014.482] I> Boot-device: eMMC [0014.485] I> Add boot-sdmmc to plugin-manager/misc-data [0014.490] I> Add storage-sdmmc to plugin-manager/misc-data [0014.496] W> Unknown storage device [0014.499] I> Add serial number:0421019009479 as DT property [0014.505] I> Plugin-manager override starting [0014.509] I> node /plugin-manager/fragement-tegra-wdt-en matches [0014.516] I> node /plugin-manager/fragement-soft-wdt matches [0014.523] I> node /plugin-manager/fragment-pcie-c5-rp matches [0014.528] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0014.538] I> Disable plugin-manager status in FDT [0014.539] I> Plugin-manager override finished successfully [0014.542] I> tegrabl_load_kernel_and_dtb: Done [0014.546] E> tegrabl_display_clear: display is not initialized [0014.551] W> Boot logo display failed... [0014.555] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 6.390019] cgroup: cgroup2: unknown option "nsdelegate" [ 7.601463] using random self ethernet address [ 7.601589] using random host ethernet address [ 7.849344] random: crng init done [ 7.849448] random: 7 urandom warning(s) missed due to ratelimiting [ 8.142067] using random self ethernet address [ 8.142195] using random host ethernet address [ 10.330075] Bridge firewalling registered Ubuntu 18.04.6 LTS xavier ttyTCU0 xavier login: