Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB3, 11:45:51 Press CTRL-A Z for help on special keys �� [0013.619] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0013.627] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef) [0013.632] I> Boot-mode: Platform RCM [0013.636] I> Chip revision : A02P [0013.639] I> Bootrom patch version : 15 (correctly patched) [0013.644] I> ATE fuse revision : 0x200 [0013.647] I> Ram repair fuse : 0x0 [0013.651] I> Ram Code : 0x2 [0013.653] I> rst_source : 0x0 [0013.656] I> rst_level : 0x0 [0013.660] I> USB configuration success [0015.813] I> mb2 image downloaded [0015.894] I> Recovery boot mode 0 [0015.897] I> Boot-device: eMMC [0015.902] I> UPHY full init done [0015.908] I> MB1 done [0015.913] W> Profiler not initialized [0015.917] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-) [0015.925] W> Profiler not initialized [0015.928] I> DMA Heap @ [0x40020000 - 0x40065800] [0015.933] I> Default Heap @ [0xd486400 - 0xd48a400] [0015.937] W> Profiler not initialized [0015.941] W> Profiler not initialized [0015.945] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0015.950] W> device prod register failed [0015.954] W> Profiler not initialized [0016.010] I> sdmmc DDR50 mode [0016.014] I> No supported QSPI flash found [0016.018] E> QSPI Flash: Insufficient flash size (0 MB) [0016.023] I> QSPI Flash is not present. [0016.074] E> Link startup dme_set failed [0016.078] E> UFS initialization failed [0016.082] I> UFS is not present [0016.085] W> Profiler not initialized [0016.092] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0016.102] I> Found 42 partitions in SDMMC_USER (instance 3) [0016.107] W> Profiler not initialized [0016.111] W> Profiler not initialized [0016.114] W> Profiler not initialized [0016.118] I> Entering 3p server [0016.121] I> USB configuration success [0017.088] I> Populate chip info [0017.140] I> Populate eeprom info [0017.144] I> Populate eeprom info for module cvm [0023.508] I> Populate chip info [0023.552] I> Populate eeprom info [0023.556] I> Populate eeprom info for module cvb [0023.772] I> Rebooting : reboot-recovery [002�� [0002.305] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0002.313] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef) [0002.318] I> Boot-mode: Platform RCM [0002.322] I> Chip revision : A02P [0002.325] I> Bootrom patch version : 15 (correctly patched) [0002.330] I> ATE fuse revision : 0x200 [0002.333] I> Ram repair fuse : 0x0 [0002.337] I> Ram Code : 0x2 [0002.339] I> rst_source : 0xb [0002.342] I> rst_level : 0x1 [0002.346] I> USB configuration success [0004.503] I> mb2 image downloaded [0004.540] I> Recovery boot mode 0 [0004.543] I> Boot-device: eMMC [0004.548] I> UPHY full init done [0004.554] I> MB1 done [0004.559] W> Profiler not initialized [0004.563] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-) [0004.570] W> Profiler not initialized [0004.574] I> DMA Heap @ [0x40020000 - 0x40065800] [0004.578] I> Default Heap @ [0xd486400 - 0xd48a400] [0004.583] W> Profiler not initialized [0004.587] W> Profiler not initialized [0004.590] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0004.596] W> device prod register failed [0004.600] W> Profiler not initialized [0004.624] I> sdmmc DDR50 mode [0004.628] I> No supported QSPI flash found [0004.632] E> QSPI Flash: Insufficient flash size (0 MB) [0004.637] I> QSPI Flash is not present. [0004.688] E> Link startup dme_set failed [0004.692] E> UFS initialization failed [0004.696] I> UFS is not present [0004.699] W> Profiler not initialized [0004.708] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0004.717] I> Found 42 partitions in SDMMC_USER (instance 3) [0004.722] W> Profiler not initialized [0004.726] W> Profiler not initialized [0004.729] W> Profiler not initialized [0004.733] I> Entering 3p server [0004.736] I> USB configuration success [0005.738] I> Populate chip info [0005.790] I> Populate eeprom info [0005.794] I> Populate eeprom info for module cvm [0005.910] I> Rebooting : reboot-recovery [000�� [0081.977] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0081.985] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef) [0081.991] I> Boot-mode: RCM [0081.993] I> Chip revision : A02P [0081.996] I> Bootrom patch version : 15 (correctly patched) [0082.001] I> ATE fuse revision : 0x200 [0082.005] I> Ram repair fuse : 0x0 [0082.008] I> Ram Code : 0x2 [0082.011] I> rst_source : 0xb [0082.013] I> rst_level : 0x1 [0082.017] I> USB configuration success [0084.061] I> bct_bootrom image downloaded [0084.070] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0084.078] I> Temperature = 43500 [0084.081] W> Skipping boost for clk: BPMP_CPU_NIC [0084.085] W> Skipping boost for clk: BPMP_APB [0084.089] W> Skipping boost for clk: AXI_CBB [0084.093] W> Skipping boost for clk: AON_CPU_NIC [0084.097] W> Skipping boost for clk: CAN1 [0084.101] W> Skipping boost for clk: CAN2 [0084.106] I> Boot-device: eMMC [0084.108] I> Boot-device: eMMC [0084.111] I> bct_mb1 image downloaded [0084.121] I> ECC region[0]: Start:0x0, End:0x0 [0084.126] I> ECC region[1]: Start:0x0, End:0x0 [0084.130] I> ECC region[2]: Start:0x0, End:0x0 [0084.134] I> ECC region[3]: Start:0x0, End:0x0 [0084.138] I> ECC region[4]: Start:0x0, End:0x0 [0084.142] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0084.148] I> Non-ECC region[1]: Start:0x0, End:0x0 [0084.152] I> Non-ECC region[2]: Start:0x0, End:0x0 [0084.157] I> Non-ECC region[3]: Start:0x0, End:0x0 [0084.161] I> Non-ECC region[4]: Start:0x0, End:0x0 [0084.167] E> FAILED: Thermal config [0084.175] E> FAILED: MEMIO rail config [0084.189] E> Task 50 failed (err: 0x7979061c) [0084.193] E> Top caller module: ALIASCHECKER, error module: ALIASCHECKER, reas6 [0084.202] I> MB1(1.5.1.9-t194-41334769-73a9b7ef) BIT boot status dump : 00000000000111111111100001111111111111100110001111100000000000000000000000000000 [0084.232] I> Reset to recovery mode