zhou@zhou-Lenovo-Y50p-70:~/work/cmd$ sudo picocom -b 115200 /dev/ttyUSB0 picocom v1.7 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv imap is : omap is : emap is : crcrlf,delbs, Terminal ready xingshen001@ugv:~$ xingshen001@ugv:~$ xingshen001@ugv:~$ �� [0000.291] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.299] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.305] I> Boot-mode: Coldboot [0000.308] I> Chip revision : A02P [0000.311] I> Bootrom patch version : 15 (correctly patched) [0000.316] I> ATE fuse revision : 0x200 [0000.319] I> Ram repair fuse : 0x0 [0000.323] I> Ram Code : 0x2 [0000.325] I> rst_source : 0x0 [0000.328] I> rst_level : 0x0 [0000.331] I> Boot-device: eMMC [0000.346] I> sdmmc DDR50 mode [0000.350] I> Active Boot chain : 1 [0000.354] I> Boot-device: eMMC [0000.357] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.365] I> Temperature = 52500 [0000.368] W> Skipping boost for clk: BPMP_CPU_NIC [0000.372] W> Skipping boost for clk: BPMP_APB [0000.376] W> Skipping boost for clk: AXI_CBB [0000.380] W> Skipping boost for clk: AON_CPU_NIC [0000.385] W> Skipping boost for clk: CAN1 [0000.388] W> Skipping boost for clk: CAN2 [0000.393] I> Boot-device: eMMC [0000.396] I> Boot-device: eMMC [0000.405] I> Sdmmc: HS400 mode enabled [0000.409] I> ECC region[0]: Start:0x0, End:0x0 [0000.414] I> ECC region[1]: Start:0x0, End:0x0 [0000.418] I> ECC region[2]: Start:0x0, End:0x0 [0000.422] I> ECC region[3]: Start:0x0, End:0x0 [0000.426] I> ECC region[4]: Start:0x0, End:0x0 [0000.430] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.436] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.440] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.445] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.449] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.455] E> FAILED: Thermal config [0000.462] E> FAILED: MEMIO rail config [0000.480] I> Boot-device: eMMC [0000.489] I> sdmmc bdev is already initialized [0000.562] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.570] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.571] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.571] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.572] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.578] W> device prod register failed [0000.582] I> Boot-device: eMMC [0000.585] I> Boot_device: SDMMC_BOOT instance: 3 [0000.590] I> sdmmc-3 params source = boot args [0000.593] I> sdmmc bdev is already initialized [0000.598] I> sdmmc-3 params source = boot args [0000.604] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.611] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.613] I> Active Boot chain : 1 [0000.616] I> parsing oem signed section of bpmp-fw header done [0000.622] I> bpmp-fw binary init read from storage [0000.627] I> oem authentication of bpmp-fw header done [0000.633] I> bpmp-fw binary done read from storage [0000.636] I> bpmp-fw: Authentication init Done [0000.641] I> parsing oem signed section of cpubl header done [0000.646] I> cpubl binary init read from storage [0000.650] I> bpmp-fw: Authentication Finalize Done [0000.655] I> oem authentication of cpubl header done [0000.660] I> cpubl binary done read from storage [0000.664] I> cpubl: Authentication init Done [0000.669] I> parsing oem signed section of rce header done [0000.674] I> rce binary init read from storage [0000.678] I> Relocating BR-BCT [0000.681] I> cpubl: Authentication Finalize Done [0000.686] I> oem authentication of rce header done [0000.690] I> rce binary done read from storage [0000.694] I> rce: Authentication init Done [0000.699] I> parsing oem signed section of ape header done [0000.704] I> ape binary init read from storage [0000.708] I> rce: Authentication Finalize Done [0000.712] I> oem authentication of ape header done [0000.717] I> ape binary done read from storage [0000.721] I> ape: Authentication init Done [0000.726] I> parsing oem signed section of tos header done [0000.730] I> tos binary init read from storage [0000.735] I> ape: Authentication Finalize Done [0000.739] I> oem authentication of tos header done [0000.743] I> tos binary done read from storage [0000.748] I> tos: Authentication init Done [0000.752] I> parsing oem signed section of bpmp-fw-dtb header done [0000.758] I> bpmp-fw-dtb binary init read from storage [0000.763] I> tos: Authentication Finalize Done [0000.769] I> oem authentication of bpmp-fw-dtb header done [0000.775] I> bpmp-fw-dtb binary done read from storage [0000.777] I> bpmp-fw-dtb: Authentication init Done [0000.782] I> parsing oem signed section of cpubl-dtb header done [0000.788] I> cpubl-dtb binary init read from storage [0000.793] I> bpmp-fw-dtb: Authentication Finalize Done [0000.831] I> oem authentication of cpubl-dtb header done [0000.831] I> cpubl-dtb binary done read from storage [0000.832] I> cpubl-dtb: Authentication init Done [0000.834] I> parsing oem signed section of eks header done [0000.835] I> eks binary init read from storage [0000.835] I> cpubl-dtb: Authentication Finalize Done [0000.836] I> oem authentication of eks header done [0000.839] I> eks binary done read from storage [0000.844] I> eks: Authentication init Done [0000.848] I> eks: Authentication Finalize Done [0000.852] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized �� ��mrq initialized ��[0001.355] I> Welcome to Cboot ��fmon_post initialized ��[0001.355] I> Cboot Version: t194-cfa2bc91 [0001.356] I> CPU-BL Params @ 0xf2820000 [0001.356] I> 0) Base:0x00000000 Size:0x00000000 [0001.360] I> 1) Base:0xf1100000 Size:0x00100000 [0001.364] I> 2) Base:0xf2000000 Size:0x00200000 [0001.369] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.373] I> 4) Base:0xf1000000 Size:0x00100000 [0001.452] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.457] I> 6) Base:0xf3800000 Size:0x00400000 [0001.461] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.466] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.470] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.475] I> 10) Base:0xf3000000 Size:0x00800000 [0001.479] I> 11) Base:0x40000000 Size:0x00040000 [0001.484] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.488] I> 13) Base:0x40046000 Size:0x00002000 [0001.493] I> 14) Base:0x40048000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� [0001.502] I> 15) Base:0xac000000 Size:0x00004000 ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.506] I> 16) Base:0x4004a000 Size:0x00002000 [0001.557] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.561] I> 18) Base:0x4004c000 Size:0x00002000 [0001.566] I> 19) Base:0xf2200000 Size:0x00600000 [0001.570] I> 20) Base:0x4004e000 Size:0x00002000 [0001.575] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.579] I> 22) Base:0x00000000 Size:0x00000000 [0001.584] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.588] I> 24) Base:0xf6000000 Size:0x02000000 [0001.592] I> 25) Base:0x40050000 Size:0x00002000 [0001.597] I> 26) Base:0x40040000 Size:0x00006000 [0001.601] I> 27) Base:0xf1800000 Size:0x00400000 [0001.606] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.610] I> 29) Base:0xf1400000 Size:0x00400000 [0001.615] I> 30) Base:0x00000000 Size:0x00000000 [0001.619] I> 31) Base:0x00000000 Size:0x00000000 [0001.624] I> 32) Base:0xf8000000 Size:0x08000000 [0001.628] I> 33) Base:0x00000000 Size:0x00000000 [0001.633] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.637] I> 35) Base:0xab000000 Size:0x01000000 [0001.642] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.646] I> 37) Base:0xf2800000 Size:0x00800000 [0001.650] I> 38) Base:0x80000000 Size:0x20000000 [0001.655] I> 39) Base:0xb0000000 Size:0x08000000 [0001.659] I> 40) Base:0x00000000 Size:0x00000000 [0001.664] I> 41) Base:0x00000000 Size:0x00000000 [0001.668] I> 42) Base:0x00000000 Size:0x00000000 [0001.673] I> 43) Base:0x00000000 Size:0x00000000 [0001.677] I> 44) Base:0x00000000 Size:0x00000000 [0001.682] I> 45) Base:0x00000000 Size:0x00000000 [0001.686] GIC-SPI Target CPU: 0 [0001.689] Interrupts Init done [0001.692] calling constructors [0001.695] initializing heap [0001.698] I> Heap: [0xa0699b80 ... 0xab000000] [0001.702] initializing threads [0001.705] initializing timers [0001.708] creating bootstrap completion thread [0001.712] top of bootstrap2() [0001.715] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.719] initializing platform [0001.722] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.728] W> device prod register failed [0001.731] I> Bl_dtb @0xaaf00000 [0001.738] W> "plugin-manager" doesn't exist, creating [0001.739] W> "ids" doesn't exist, creating [0001.744] W> "connection" doesn't exist, creating [0001.748] W> "configs" doesn't exist, creating [0001.760] E> failed to read label property for node 225020: 13 [0001.763] E> failed to read reg property for node 225108: 13 [0001.765] E> failed to read label property for node 225160: 13 [0001.771] E> failed to read label property for node 225228: 13 [0001.777] E> failed to read label property for node 225264: 13 [0001.782] E> failed to read label property for node 225300: 13 [0001.787] E> failed to read reg property for node 225368: 13 [0001.793] E> failed to read label property for node 225420: 13 [0001.799] I> Find /i2c@3160000's alias i2c0 [0001.801] I> Reading eeprom i2c=0 address=0x50 [0001.831] I> Device at /i2c@3160000:0x50 [0001.831] I> Reading eeprom i2c=0 address=0x56 [0001.832] E> I2C: slave not found in slaves. [0001.832] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.833] E> I2C_DEV: Failed to send register address 0x00000000. [0001.833] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.841] E> eeprom: Failed to read I2C slave device [0001.846] I> Eeprom read failed 0x3526070d [0001.851] I> Find /i2c@3180000's alias i2c2 [0001.854] I> Reading eeprom i2c=2 address=0x54 [0001.859] E> I2C: slave not found in slaves. [0001.862] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.870] E> I2C_DEV: Failed to send register address 0x00000000. [0001.875] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.885] E> eeprom: Failed to read I2C slave device [0001.890] I> Eeprom read failed 0x3526070d [0001.894] I> Reading eeprom i2c=2 address=0x57 [0001.898] E> I2C: slave not found in slaves. [0001.902] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.910] E> I2C_DEV: Failed to send register address 0x00000000. [0001.916] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.925] E> eeprom: Failed to read I2C slave device [0001.930] I> Eeprom read failed 0x3526070d [0001.934] I> Reading eeprom i2c=2 address=0x52 [0001.938] E> I2C: slave not found in slaves. [0001.942] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.950] E> I2C_DEV: Failed to send register address 0x00000000. [0001.956] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.965] E> eeprom: Failed to read I2C slave device [0001.970] I> Eeprom read failed 0x3526070d [0001.975] I> Find /i2c@c240000's alias i2c1 [0001.978] I> Reading eeprom i2c=1 address=0x52 [0001.984] E> I2C: slave not found in slaves. [0001.986] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.994] E> I2C_DEV: Failed to send register address 0x00000000. [0002.000] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.009] E> eeprom: Retry to read I2C slave device. [0002.014] E> I2C: slave not found in slaves. [0002.018] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.026] E> I2C_DEV: Failed to send register address 0x00000000. [0002.032] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.041] E> eeprom: Failed to read I2C slave device [0002.046] I> Eeprom read failed 0x3526070d [0002.050] I> Reading eeprom i2c=1 address=0x50 [0002.054] E> I2C: slave not found in slaves. [0002.058] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.066] E> I2C_DEV: Failed to send register address 0x00000000. [0002.072] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.081] E> eeprom: Retry to read I2C slave device. [0002.086] E> I2C: slave not found in slaves. [0002.090] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.098] E> I2C_DEV: Failed to send register address 0x00000000. [0002.103] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.113] E> eeprom: Failed to read I2C slave device [0002.118] I> Eeprom read failed 0x3526070d [0002.122] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.127] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.138] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0002.146] W> "i2c@3160000" doesn't exist, creating [0002.150] W> "module@0x50" doesn't exist, creating [0002.156] I> Adding plugin-manager/cvm [0002.158] W> "chip-id" doesn't exist, creating [0002.162] I> Adding plugin-manager/chip-id/A02P [0002.167] I> Plugin-manager override starting [0002.172] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.180] I> node /plugin-manager/fragement-soft-wdt matches [0002.188] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.192] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.199] I> Disable plugin-manager status in FDT [0002.200] I> Plugin-manager override finished successfully [0002.204] I> gpio framework initialized [0002.209] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.216] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.222] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.230] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.238] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.244] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.250] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.258] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.266] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.272] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.279] I> fixed regulator driver initialized [0002.291] I> register 'maxim' power off handle [0002.292] I> virtual i2c enabled [0002.292] I> registered 'maxim,max20024' pmic [0002.294] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.301] I> Boot-device: eMMC [0002.304] I> Boot_device: SDMMC_BOOT instance: 3 [0002.312] I> sdmmc-3 params source = boot args [0002.313] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.318] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.329] I> sdmmc bdev is already initialized [0002.333] I> sdmmc-3 params source = boot args [0002.363] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.376] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.387] I> enabling 'vdd-hdmi-5v0' regulator [0002.392] I> regulator 'vdd-hdmi-5v0' already enabled [0002.392] I> hdmi cable connected [0002.394] W> set volts not configured for 'vdd-1v0' [0002.397] W> set volts not configured for 'vdd-1v8-hs' [0002.397] I> retrieved tmds range from prod_list_hdmi_soc [0002.402] E> invalid display type [0002.407] E> invalid display type [0002.407] E> cannot find any other nvdisp nodes [0002.415] E> I2C: Timeout while polling for transfer complete. Last value 0x00000002. [0002.416] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.417] E> I2C_DEV: Failed to send register address 0x00000000. [0002.421] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 at 0x00000000 via instance 6. [0002.431] E> could not read edid [0002.438] I> hdmi_enable, starting HDMI initialisation [0002.443] I> hdmi_enable, HDMI initialisation complete [0002.453] I> Load in CBoot Boot Options partition and parse it [0002.459] E> Error -9 when finding node with path /boot-configuration [0002.460] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.463] I> Using default boot order [0002.467] I> boot-dev-order :- [0002.470] I> 1.sd [0002.471] I> 2.usb [0002.473] I> 3.nvme [0002.475] I> 4.emmc [0002.477] I> 5.net [0002.479] I> Hit any key to stop autoboot: 4 3 2 1 [0004.487] initializing target [0004.487] calling apps_init() [0004.488] starting app kernel_boot_app [0004.507] I> found decompressor handler: lz4-legacy [0004.508] I> decompressing BMP blob ... [0004.511] I> Kernel type = Normal [0004.511] I> ########## SD (0) boot ########## [0004.512] W> Error: failed to get sd-card params [0004.513] I> -0 params source = [0004.513] W> Failed to initialize device 6-0 [0004.513] E> SD boot failed, err: 252641293 [0004.514] I> ########## USB (0) boot ########## [0004.529] I> Validate XUSB-FW ... [0004.529] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.531] I> Encryption fuse is not ON [0004.532] I> USB Firmware Version: 60.09 release [0004.591] I> regulator of usb2-0 already enabled [0004.598] I> regulator of usb2-1 already enabled [0004.604] I> regulator of usb2-2 already enabled [0004.613] I> enabling 'vdd-5v-sata' regulator [0005.618] E> failed to initialize xhci controller [0005.618] E> Error in init of XUSB host driver, err: 79790026 [0005.619] W> Failed to initialize device 5-0 [0005.619] E> USB boot failed, err: 2037973030 [0005.619] I> ########## NVME (0) boot ########## [0005.620] I> Initializing nvme device instance 0 [0005.620] I> Initializing nvme controller [0005.624] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.631] I> vpcie3v3-supply not found [0005.634] I> vpcie12v-supply not found [0005.638] W> Failed to get nvidia,plat-gpios [0005.642] I> tegrabl_pcie_soc_preinit: (0): [0005.646] I> Unpowergate [0005.648] I> tegrabl_car_clk_disable(0) ... [0005.652] I> tegrabl_car_rst_set(CORE, 0) ... [0005.657] I> tegrabl_car_rst_set(APB, 0) ... [0005.661] I> tegrabl_car_clk_enable(0) ... [0005.665] I> tegrabl_car_rst_clear(APB, 0) ... [0005.669] I> tegrabl_set_ctrl_state(0) [0005.672] I> CLR PCIE_APB:6 [0005.675] I> tegrabl_pcie_soc_init: (0): [0005.679] I> APPL initialization ... [0005.682] I> poweron phys [0005.685] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.691] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.696] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.702] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.707] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0005.848] I> PCIe controller-0 link is up [0005.848] I> tegra_pcie_info[0].cfg0_base = 0x38000000 [0005.848] I> tegra_pcie_info[0].cfg1_base = 0x38020000 [0005.849] I> tegra_pcie_info[0].atu_dma_base = 0x38040000 [0005.849] I> tegra_pcie_bus[0].mem = 0x38200000 [0005.849] I> Scanning busnr: 0 devfn: 0 [0005.850] I> PCIe IDs: 0x1ad010de [0005.853] I> PCIe RID_CC: 0x60400a1 [0005.856] I> Scanning busnr: 1 devfn: 0 [0005.860] I> PCIe IDs: 0x2263126f [0005.863] I> PCIe RID_CC: 0x1080203 [0005.866] I> PCI Config: I/O=0x38100000, Memory=0x38200000 [0005.872] I> MEM64 bar_num=0 bar=0x38200000 [0005.876] I> Number of PCIe devices detected: 2 [0005.880] I> NVME page size: 4096 [0005.942] I> NVMe serial number: ASV59256B17RY90280 [0005.943] I> NVMe model number: Acer VT500M M.2 NVME 256G [0005.943] I> NVMe firmware revision: S1111A0L [0006.032] I> block_count: 500118192 [0006.032] I> supported_lba: 0 [0006.032] I> block_size_log2: 0x9 [0006.037] I> tegrabl_create_io_queue_cmd: queue size: 2 [0006.046] I> tegrabl_create_io_queue_cmd: queue size: 2 [0006.047] I> nvme device id 000a0000 [0006.048] I> nvme-0 params source = [0006.048] W> Cannot find any partition table for 000a0000 [0006.049] I> Detect filesystem [0006.050] I> Loading kernel-bootctrl from partition [0006.050] I> Loading partition kernel-bootctrl at 0xa4b30000 from device(0x1) [0006.065] I> Loading recovery ... [0006.066] E> Cannot open partition recovery [0006.066] E> Load recovery image or recovery dtb failed, err: 202184205 [0006.067] I> removable_boot_load_kernel_and_dtb: force NVME bdev to close !!! [0006.074] E> NVME (0) boot failed, err: 0xc0d160d [0006.078] I> ########## NVME (1) boot ########## [0006.083] I> Initializing nvme device instance 1 [0006.087] I> Initializing nvme controller [0006.091] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.098] I> vpcie3v3-supply not found [0006.101] I> vpcie12v-supply not found [0006.105] W> Failed to get nvidia,plat-gpios [0006.109] I> tegrabl_pcie_soc_preinit: (1): [0006.113] I> Unpowergate [0006.115] I> tegrabl_car_clk_disable(1) ... [0006.119] I> tegrabl_car_rst_set(CORE, 1) ... [0006.123] I> tegrabl_car_rst_set(APB, 1) ... [0006.128] I> tegrabl_car_clk_enable(1) ... [0006.132] I> tegrabl_car_rst_clear(APB, 1) ... [0006.136] I> tegrabl_set_ctrl_state(1) [0006.139] I> CLR PCIE_APB:6 [0006.142] I> tegrabl_pcie_soc_init: (1): [0006.146] I> APPL initialization ... [0006.149] I> poweron phys [0006.152] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.158] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0007.263] C> Failed to link up controller-1 [0007.264] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0007.264] I> Failed to initialize SoC Host PCIe controller [0007.265] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(1); error=0x12 [0007.265] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0007.266] W> Failed to open NVME-1, err = 80800612 [0007.270] W> Failed to initialize device 10-1 [0007.275] E> NVME (1) boot failed, err: 0x80800612 [0007.279] I> ########## NVME (2) boot ########## [0007.284] I> Initializing nvme device instance 2 [0007.288] I> Initializing nvme controller [0007.292] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.298] I> vpcie3v3-supply not found [0007.302] I> vpcie12v-supply not found [0007.306] W> Failed to get nvidia,plat-gpios [0007.310] I> tegrabl_pcie_soc_preinit: (2): [0007.314] I> Unpowergate [0007.316] I> tegrabl_car_clk_disable(2) ... [0007.320] I> tegrabl_car_rst_set(CORE, 2) ... [0007.324] I> tegrabl_car_rst_set(APB, 2) ... [0007.328] I> tegrabl_car_clk_enable(2) ... [0007.332] I> tegrabl_car_rst_clear(APB, 2) ... [0007.337] I> tegrabl_set_ctrl_state(2) [0007.340] I> CLR PCIE_APB:6 [0007.343] I> tegrabl_pcie_soc_init: (2): [0007.347] I> APPL initialization ... [0007.350] I> poweron phys [0007.353] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.359] I> tegrabl_power_on_phy: controller 2 not available [0007.364] E> Failed to power on phy on controller-2 [0007.370] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0007.374] I> Failed to initialize SoC Host PCIe controller [0007.380] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0007.386] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0007.392] W> Failed to open NVME-2, err = 80800601 [0007.397] W> Failed to initialize device 10-2 [0007.401] E> NVME (2) boot failed, err: 0x80800601 [0007.406] I> ########## NVME (3) boot ########## [0007.410] I> Initializing nvme device instance 3 [0007.415] I> Initializing nvme controller [0007.419] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.425] I> vpcie3v3-supply not found [0007.429] I> vpcie12v-supply not found [0007.432] W> Failed to get nvidia,plat-gpios [0007.436] I> tegrabl_pcie_soc_preinit: (3): [0007.440] I> Unpowergate [0007.443] I> tegrabl_car_clk_disable(3) ... [0007.447] I> tegrabl_car_rst_set(CORE, 3) ... [0007.451] I> tegrabl_car_rst_set(APB, 3) ... [0007.455] I> tegrabl_car_clk_enable(3) ... [0007.459] I> tegrabl_car_rst_clear(APB, 3) ... [0007.463] I> tegrabl_set_ctrl_state(3) [0007.467] I> CLR PCIE_APB:6 [0007.470] I> tegrabl_pcie_soc_init: (3): [0007.473] I> APPL initialization ... [0007.477] I> poweron phys [0007.480] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0007.486] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0008.591] C> Failed to link up controller-3 [0008.592] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.592] I> Failed to initialize SoC Host PCIe controller [0008.592] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0008.593] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.593] W> Failed to open NVME-3, err = 80800612 [0008.598] W> Failed to initialize device 10-3 [0008.602] E> NVME (3) boot failed, err: 0x80800612 [0008.607] I> ########## NVME (4) boot ########## [0008.611] I> Initializing nvme device instance 4 [0008.616] I> Initializing nvme controller [0008.620] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.626] I> vpcie3v3-supply not found [0008.630] I> vpcie12v-supply not found [0008.633] W> Failed to get nvidia,plat-gpios [0008.637] I> tegrabl_pcie_soc_preinit: (4): [0008.641] I> Unpowergate [0008.644] I> tegrabl_car_clk_disable(4) ... [0008.648] I> tegrabl_car_rst_set(CORE, 4) ... [0008.652] I> tegrabl_car_rst_set(APB, 4) ... [0008.656] I> tegrabl_car_clk_enable(4) ... [0008.660] I> tegrabl_car_rst_clear(APB, 4) ... [0008.664] I> tegrabl_set_ctrl_state(4) [0008.668] I> CLR PCIE_APB:6 [0008.671] I> tegrabl_pcie_soc_init: (4): [0008.674] I> APPL initialization ... [0008.678] I> poweron phys [0008.681] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0008.686] I> tegrabl_power_on_phy: controller 4 not available [0008.692] E> Failed to power on phy on controller-4 [0008.697] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.702] I> Failed to initialize SoC Host PCIe controller [0008.707] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0008.713] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.720] W> Failed to open NVME-4, err = 80800601 [0008.725] W> Failed to initialize device 10-4 [0008.729] E> NVME (4) boot failed, err: 0x80800601 [0008.733] I> ########## NVME (5) boot ########## [0008.738] I> Initializing nvme device instance 5 [0008.742] I> Initializing nvme controller [0008.747] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.753] I> i=0, reg_phandle=0x1b [0008.758] I> reg_voltage=3300000 [0008.759] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0008.770] I> enabling 'vdd-3v3-pcie' regulator [0008.771] I> i=1, reg_phandle=0x1c [0008.776] I> reg_voltage=1200000 [0008.777] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0008.788] I> enabling 'vdd-12v-pcie' regulator [0008.789] I> tegrabl_pcie_soc_preinit: (5): [0008.792] I> Unpowergate [0008.795] I> tegrabl_car_clk_disable(5) ... [0008.799] I> tegrabl_car_rst_set(CORE, 5) ... [0008.803] I> tegrabl_car_rst_set(APB, 5) ... [0008.807] I> tegrabl_car_clk_enable(5) ... [0008.811] I> tegrabl_car_rst_clear(APB, 5) ... [0008.815] I> tegrabl_set_ctrl_state(5) [0008.819] I> CLR PCIE_APB:6 [0008.822] I> tegrabl_pcie_soc_init: (5): [0008.825] I> APPL initialization ... [0008.829] I> poweron phys [0008.832] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0008.838] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0008.843] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0008.848] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0008.854] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0008.859] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0008.864] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0008.870] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0008.875] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0009.980] C> Failed to link up controller-5 [0009.981] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.981] I> Failed to initialize SoC Host PCIe controller [0009.982] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0009.982] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.983] W> Failed to open NVME-5, err = 80800612 [0009.987] W> Failed to initialize device 10-5 [0009.992] E> NVME (5) boot failed, err: 0x80800612 [0009.996] I> ########## Fixed storage boot ########## [0010.001] I> Loading kernel-bootctrl from partition [0010.006] I> Loading partition kernel-bootctrl at 0xa4b30000 from device(0x1) [0010.021] I> A/B: bin_type (50) slot 0 [0010.021] I> Loading recovery from partition [0010.021] I> Loading partition recovery at 0xa4b30000 from device(0x1) [0010.409] I> Validate recovery ... [0010.409] I> T19x: Authenticate recovery (bin_type: 50), max size 0x5000000 [0010.898] I> Encryption fuse is not ON [0010.928] I> Checking boot.img header magic ... [0010.929] I> [OK] [0010.929] I> A/B: bin_type (51) slot 0 [0010.929] I> Loading recovery-dtb from partition [0010.930] I> Loading partition recovery-dtb at 0x91000000 from device(0x1) [0010.937] I> Validate recovery-dtb ... [0010.937] I> T19x: Authenticate recovery-dtb (bin_type: 51), max size 0x400000 [0010.940] I> Encryption fuse is not ON [0010.942] I> Kernel hdr @0xa4b30000 [0010.942] I> Kernel dtb @0x91000000 [0010.945] I> decompressor handler not found [0010.949] I> Copying kernel image (34400264 bytes) from 0xa4b30800 to 0x80080000 ... [0010.965] I> Done [0010.965] I> Move ramdisk (len: 19266880) from 0xa6bff800 to 0x92000000 [0010.970] I> Updated bpmp info to DTB [0010.972] I> Ramdisk: Base: 0x92000000; Size: 0x125fd40 [0010.973] I> Updated initrd info to DTB [0010.977] W> WARN: Fail to override "console=none" in commandline [0010.983] I> Active rootfs suffix: [0010.986] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0010.994] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0011.001] I> Active slot suffix: _b [0011.004] I> add_boot_slot_suffix: slot_suffix = _b [0011.009] I> Linux Cmdline: root=/dev/initrd rw rootwait quiet console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 base_version=R32-3 target_board=jetson-agx-xavier-devkit root=/dev/initrd rw rootwait quiet console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 base_version=R32-3 target_board=jetson-agx-xavier-devkit gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a4000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix=_b boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0011.070] I> Updated bootarg info to DTB [0011.074] W> MAC addr invalid! [0011.077] E> Failed to get WIFI MAC address [0011.081] W> MAC addr invalid! [0011.084] E> Failed to get Bluetooth MAC address [0011.088] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:2f:fe:89 [0011.095] W> "plugin-manager" doesn't exist, creating [0011.100] I> Adding /chosen/plugin-manager/cvm [0011.104] W> "chip-id" doesn't exist, creating [0011.108] I> Adding /chosen/plugin-manager/chip-id [0011.113] W> "configs" doesn't exist, creating [0011.117] I> Adding /chosen/plugin-manager/configs [0011.121] W> "ids" doesn't exist, creating [0011.125] I> Adding /chosen/plugin-manager/ids [0011.130] W> "odm-data" doesn't exist, creating [0011.134] I> Adding /chosen/plugin-manager/odm-data [0011.141] W> "memory" doesn't exist, creating [0011.143] I> [0] START: 0x80000000, END: 0xac000000 [0011.148] I> [1] START: 0xac004000, END: 0xf0ad0000 [0011.152] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0011.157] I> dram_block larger than 80000000 [0011.161] I> [3] START: 0x100000000, END: 0x880000000 [0011.166] I> added [base:0x80000000, size:0x2c000000] to /memory [0011.172] I> added [base:0xac200000, size:0x44800000] to /memory [0011.178] I> added [base:0x100000000, size:0x780000000] to /memory [0011.185] I> Updated memory info to DTB [0011.188] E> add_disp_param: failed to get display params for du=1 [0011.194] W> "reset" doesn't exist, creating [0011.198] I> Adding ecid(00000001647dd5011000000012038140) to DT [0011.204] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0011.208] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0011.213] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0011.218] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0011.222] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0011.227] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0011.232] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0011.237] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0011.243] W> "misc-data" doesn't exist, creating [0011.246] I> Boot-device: eMMC [0011.249] I> Add boot-sdmmc to plugin-manager/misc-data [0011.254] I> Add storage-sdmmc to plugin-manager/misc-data [0011.259] W> Unknown storage device [0011.263] I> Add serial number:1420121080403 as DT property [0011.269] I> Plugin-manager override starting [0011.273] I> node /plugin-manager/fragement-tegra-wdt-en matches [0011.280] I> node /plugin-manager/fragement-soft-wdt matches [0011.287] I> node /plugin-manager/fragment-pcie-c5-rp matches [0011.291] E> Failed to find phandle for override@0 [0011.294] E> failed to override fragment: 304d0 [0011.300] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0011.309] I> Disable plugin-manager status in FDT [0011.309] I> Plugin-manager override finished successfully [0011.314] I> tegrabl_load_kernel_and_dtb: Done [0011.319] I> SMD partition is updated. [0011.364] I> Kernel EP: 0x80080000, DTB: 0x91000000 [ 2.261245] tegra-usb-cd usb_cd: failed to get otg port phy -19 [ 2.264138] ucsi_ccg 1-0008: read version failed [ 2.264252] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 [ 2.403091] i2c i2c-30: of_i2c: modalias failure on /i2c@3180000/tca9546@70/i2c@0/imx185_a@30 [ 2.403274] i2c i2c-30: of_i2c: modalias failure on /i2c@3180000/tca9546@70/i2c@0/imx185_a@31 [ 2.403436] i2c i2c-30: of_i2c: modalias failure on /i2c@3180000/tca9546@70/i2c@0/imx185_a@32 [ 2.403597] i2c i2c-30: of_i2c: modalias failure on /i2c@3180000/tca9546@70/i2c@0/imx185_a@33 [ 2.404278] i2c i2c-31: of_i2c: modalias failure on /i2c@3180000/tca9546@70/i2c@1/imx185_c@30 [ 2.404915] i2c i2c-32: of_i2c: modalias failure on /i2c@3180000/tca9546@70/i2c@2/imx185_e@30 ��WARNING: pll_d3 has no dyn ramp ��[ 2.431833] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.434046] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.436368] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.438546] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.440509] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.442196] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.443921] regmap_util_write_table_8:regmap_util_write_table:-121 [ 2.929398] rt5659 7-001a: Device with ID register ffffff80 is not rt5659 [ 2.958191] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 2.958245] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.248468] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.248535] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.252348] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.252432] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.601419] Failed to execute /init (error -2) [ 4.601562] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 4.612848] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.9.140-tegra #9 [ 4.619052] Hardware name: Jetson-AGX (DT) [ 4.623510] Call trace: [ 4.625885] [] dump_backtrace+0x0/0x198 [ 4.631651] [] show_stack+0x24/0x30 [ 4.636556] [] dump_stack+0x98/0xc0 [ 4.642065] [] panic+0x11c/0x298 [ 4.647052] [] kernel_init+0xf4/0x108 [ 4.651954] [] ret_from_fork+0x10/0x40 [ 4.657729] SMP: stopping secondary CPUs [ 4.661668] Kernel Offset: disabled [ 4.664990] Memory Limit: none [ 4.668398] trusty-log panic notifier - trusty version Built: 12:20:34 Jul 26 2021 [ 4.682670] Rebooting in 5 seconds.. ����Shutdown state requested 1 Rebooting system ...