=== NVIDIA Libargus Camera Service (0.97.3)=== Listening for connections...=== gst-launch-1.0[7698]: Connection established (7F91ACB1D0)Thread 1 getting next capture Thread 1 is waiting Thread 2 getting next capture Thread 2 is waiting Thread 3 getting next capture Thread 3 is waiting Thread 4 getting next capture Thread 4 is waiting Thread 5 getting next capture Thread 5 is waiting Thread 6 getting next capture Thread 6 is waiting Thread 7 getting next capture Thread 7 is waiting Thread 8 getting next capture Thread 8 is waiting Thread 9 getting next capture Thread 9 is waiting Thread 10 getting next capture Thread 10 is waiting Thread 11 getting next capture Thread 11 is waiting Thread 12 getting next capture Thread 12 is waiting Starting services... Worker thread IspHw statsComplete start Worker thread IspHw frameComplete start Worker thread CaptureScheduler checkFramePending start Worker thread CaptureScheduler frameStart start Worker thread V4L2CaptureScheduler checkCaptureComplete start Worker thread V4L2CaptureScheduler issueCaptures start Worker thread PS handleRequests start getInstance: s_instance(0x7f8c7bbd70) getInstance: s_instance(0x7f8c7bbd70) subscribe: SensorType(gyroscope) subscribe: create SensorType(gyroscope) sensor(0x7f8c7bd160) subscribe: SensorType(accelerometer) subscribe: create SensorType(accelerometer) sensor(0x7f8c7bd5c0) AC plugin not present: dlopen "acplugin.so", acplugin.so: cannot open shared object file: No such file or directory Services are started NvPclSetHotplugCallback: ++++++++++++++++++++++ ---- Imager: Calibration blob file handling supported in this build ---- NvPclHwGetModuleList: OFParserListModules Succeeded OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module0 OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module1 NvPclHwGetModuleList: WARNING: Could not map module to ISP config string NvPclHwGetModuleList: No module data found NvPclHwPrintModuleDefinition -- Name: dualimx415_front_7220061 NvPclHwPrintModuleDefinition -- Position: 1 NvPclHwPrintModuleDefinition -- CalibrationData Found: 1 NvPclHwPrintCameraSubModule -- HwCamSubModule[0].Name: v4l2_sensor NvPclHwPrintCameraSubModule -- HwCamSubModule[0].DevName: imx415 7-0036 NvPclHwGetModuleList: WARNING: Could not map module to ISP config string NvPclHwGetModuleList: No module data found NvPclHwPrintModuleDefinition -- Name: dualimx415_rear_7220061 NvPclHwPrintModuleDefinition -- Position: 0 NvPclHwPrintModuleDefinition -- CalibrationData Found: 1 NvPclHwPrintCameraSubModule -- HwCamSubModule[0].Name: v4l2_sensor NvPclHwPrintCameraSubModule -- HwCamSubModule[0].DevName: imx415 7-0010 NvPclHwGetModuleList: OFParserListModules Succeeded NvPclModuleListInitialize: NvPclModule list[0]: dualimx415_front_7220061 position1 NvPclModuleListInitialize: NvPclModule list[1]: dualimx415_rear_7220061 position0 NvPclHwScanExternalCameras -- adding video1 to discover list NvPclHwScanExternalCameras -- adding video0 to discover list NvPclHwScanExternalCameras -- adding video1 to discover list NvPclHwScanExternalCameras -- adding video0 to discover list NvPclHwScanExternalCameras -- adding video1 to discover list NvPclHwScanExternalCameras -- adding video0 to discover list getHotplugMonitor: Getting hotplug monitor instance initializeHotplug++ hotPlugfunc ++ addWatch: Watch added wd='1' CheckProcDTExists: INFO: accessing /proc/device-tree/tegra-virtual-camera-platform/modules; No such file or directory OFParserGetVirtualDevice: NVIDIA Camera virtual enumerator not found in proc device-tree setHotplugCallback: Registered new callback client NvPclSetHotplugCallback: ---------------------- hotPlugfunc: reading from inotify FD, Thread waiting NvPclOpen: ++++++++++++++++++++++ NvPclStateControllerOpen: Found GUID 1 match at index[0] NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c7564c0 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c7be4b0 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c7623a0 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c437a00 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c76f740 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c76f6b0 LoadOverridesFile: looking for override file [/Calib/camera_override.isp] 1/16 CheckOverridesPermissions: stat(/Calib/camera_override.isp) call failed LoadOverridesFile: looking for override file [/data/vendor/nvcam/settings/camera_overrides.isp] 2/16 CheckOverridesPermissions: stat(/data/vendor/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/opt/nvidia/nvcam/settings/camera_overrides.isp] 3/16 CheckOverridesPermissions: stat(/opt/nvidia/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/var/nvidia/nvcam/settings/camera_overrides.isp] 4/16 CheckOverridesPermissions: override file [/var/nvidia/nvcam/settings/camera_overrides.isp] has correct owner and mode ---- imager: Found override file [/var/nvidia/nvcam/settings/camera_overrides.isp]. ---- Imager: looking for override file [/mnt/factory/camera/factory.bin] 1/16 Imager: looking for override file [/Calib/factory.bin] 2/16 Imager: looking for override file [/Calib/calibration.bin] 3/16 Imager: looking for override file [(null)] 4/16 Imager: looking for override file [(null)] 5/16 Imager: looking for override file [(null)] 6/16 Imager: looking for override file [(null)] 7/16 Imager: looking for override file [(null)] 8/16 Imager: looking for override file [(null)] 9/16 Imager: looking for override file [(null)] 10/16 Imager: looking for override file [(null)] 11/16 Imager: looking for override file [(null)] 12/16 Imager: looking for override file [(null)] 13/16 Imager: looking for override file [(null)] 14/16 Imager: looking for override file [(null)] 15/16 Imager: looking for override file [(null)] 16/16 Imager: looking for override file [/data/vendor/nvcam/settings/factory.bin] 1/16 Imager: looking for override file [/data/vendor/nvcam/settings/dualimx415_front_7220061.bin] 2/16 Imager: looking for override file [/opt/nvidia/nvcam/settings/dualimx415_front_7220061.bin] 3/16 Imager: looking for override file [/var/nvidia/nvcam/settings/dualimx415_front_7220061.bin] 4/16 Imager: looking for override file [(null)] 5/16 Imager: looking for override file [(null)] 6/16 Imager: looking for override file [(null)] 7/16 Imager: looking for override file [(null)] 8/16 Imager: looking for override file [(null)] 9/16 Imager: looking for override file [(null)] 10/16 Imager: looking for override file [(null)] 11/16 Imager: looking for override file [(null)] 12/16 Imager: looking for override file [(null)] 13/16 Imager: looking for override file [(null)] 14/16 Imager: looking for override file [(null)] 15/16 Imager: looking for override file [(null)] 16/16 NvPclCreateDriver: Found NvPcl Driver Hal dev_name match (v4l2_sensor) NvPclCreateDriver: Found a Driver name match (v4l2_sensor) NvPclConnectDrivers: hImager was NULL, creating new imager NvPclInitializeDrivers: v4l2_sensor ++++++++++++++++++ OFDPropertyGetString: could not read property [devnode-bus] OFDPropertyCopyToLong: could not read property [has-eeprom] OFDPropertyGetString: could not read property [sync_sensor] OFDPropertyGetString: could not read property [type] loadSubType: Sensor type missing in DT, 208 OFDPropertyCopyToLong: could not read property [set_mode_delay_ms] OFDPropertyCopyToLong: could not read property [mode0.vc_id] OFDPropertyCopyToLongLong: could not read property [mode0.serdes_pix_clk_hz] OFDPropertyCopyToLongLong: could not read property [mode0.exp_time_1h] OFDPropertyCopyToFloat: could not read property [mode0.gain_step_pitch] OFDPropertyCopyToLong: could not read property [mode0.clk_settletime] OFDPropertyCopyToLong: could not read property [mode0.embedded_metadata_width] OFDPropertyGetString: could not read property [mode0.x_start] OFDPropertyGetString: could not read property [mode0.y_start] OFDPropertyGetString: could not read property [mode0.x_end] OFDPropertyGetString: could not read property [mode0.y_end] OFDPropertyGetString: could not read property [mode0.h_scaling] OFDPropertyGetString: could not read property [mode0.v_scaling] initialize: Loaded Driver: 1 Modes Available-------------- NvPclInitializeDrivers: v4l2_sensor ------------------ NvPclOpen: ---------------------- CAM: serial no file already exists, skips storing againLSC: LSC surface is not based on full res! NvPclOpen: ++++++++++++++++++++++ NvPclStateControllerOpen: Found GUID 0 match at index[1] NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8cc66a40 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8cc3fa20 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c8a0c10 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c8a16f0 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c884970 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8c899b60 LoadOverridesFile: looking for override file [/Calib/camera_override.isp] 1/16 CheckOverridesPermissions: stat(/Calib/camera_override.isp) call failed LoadOverridesFile: looking for override file [/data/vendor/nvcam/settings/camera_overrides.isp] 2/16 CheckOverridesPermissions: stat(/data/vendor/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/opt/nvidia/nvcam/settings/camera_overrides.isp] 3/16 CheckOverridesPermissions: stat(/opt/nvidia/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/var/nvidia/nvcam/settings/camera_overrides.isp] 4/16 CheckOverridesPermissions: override file [/var/nvidia/nvcam/settings/camera_overrides.isp] has correct owner and mode ---- imager: Found override file [/var/nvidia/nvcam/settings/camera_overrides.isp]. ---- Imager: looking for override file [/mnt/factory/camera/factory.bin] 1/16 Imager: looking for override file [/Calib/factory.bin] 2/16 Imager: looking for override file [/Calib/calibration.bin] 3/16 Imager: looking for override file [(null)] 4/16 Imager: looking for override file [(null)] 5/16 Imager: looking for override file [(null)] 6/16 Imager: looking for override file [(null)] 7/16 Imager: looking for override file [(null)] 8/16 Imager: looking for override file [(null)] 9/16 Imager: looking for override file [(null)] 10/16 Imager: looking for override file [(null)] 11/16 Imager: looking for override file [(null)] 12/16 Imager: looking for override file [(null)] 13/16 Imager: looking for override file [(null)] 14/16 Imager: looking for override file [(null)] 15/16 Imager: looking for override file [(null)] 16/16 Imager: looking for override file [/data/vendor/nvcam/settings/factory.bin] 1/16 Imager: looking for override file [/data/vendor/nvcam/settings/dualimx415_rear_7220061.bin] 2/16 Imager: looking for override file [/opt/nvidia/nvcam/settings/dualimx415_rear_7220061.bin] 3/16 Imager: looking for override file [/var/nvidia/nvcam/settings/dualimx415_rear_7220061.bin] 4/16 Imager: looking for override file [(null)] 5/16 Imager: looking for override file [(null)] 6/16 Imager: looking for override file [(null)] 7/16 Imager: looking for override file [(null)] 8/16 Imager: looking for override file [(null)] 9/16 Imager: looking for override file [(null)] 10/16 Imager: looking for override file [(null)] 11/16 Imager: looking for override file [(null)] 12/16 Imager: looking for override file [(null)] 13/16 Imager: looking for override file [(null)] 14/16 Imager: looking for override file [(null)] 15/16 Imager: looking for override file [(null)] 16/16 NvPclCreateDriver: Found NvPcl Driver Hal dev_name match (v4l2_sensor) NvPclCreateDriver: Found a Driver name match (v4l2_sensor) NvPclConnectDrivers: hImager was NULL, creating new imager NvPclInitializeDrivers: v4l2_sensor ++++++++++++++++++ OFDPropertyGetString: could not read property [devnode-bus] OFDPropertyCopyToLong: could not read property [has-eeprom] OFDPropertyGetString: could not read property [sync_sensor] OFDPropertyGetString: could not read property [type] loadSubType: Sensor type missing in DT, 208 OFDPropertyCopyToLong: could not read property [set_mode_delay_ms] OFDPropertyCopyToLong: could not read property [mode0.vc_id] OFDPropertyCopyToLongLong: could not read property [mode0.serdes_pix_clk_hz] OFDPropertyCopyToLongLong: could not read property [mode0.exp_time_1h] OFDPropertyCopyToFloat: could not read property [mode0.gain_step_pitch] OFDPropertyCopyToLong: could not read property [mode0.clk_settletime] OFDPropertyCopyToLong: could not read property [mode0.embedded_metadata_width] OFDPropertyGetString: could not read property [mode0.x_start] OFDPropertyGetString: could not read property [mode0.y_start] OFDPropertyGetString: could not read property [mode0.x_end] OFDPropertyGetString: could not read property [mode0.y_end] OFDPropertyGetString: could not read property [mode0.h_scaling] OFDPropertyGetString: could not read property [mode0.v_scaling] initialize: Loaded Driver: 1 Modes Available-------------- NvPclInitializeDrivers: v4l2_sensor ------------------ NvPclOpen: ---------------------- CAM: serial no file already exists, skips storing againLSC: LSC surface is not based on full res! === gst-launch-1.0[7698]: CameraProvider initialized (0x7f8cc66ad0)sourceRegistry[0] assigned ispRegistry[0] assigned Using Source GUID 1 Worker thread ViCsiHw frameComplete start Worker thread ViCsiHw frameStart start NvPclPowerOn: +++++++++++ NvPclPowerOn: ----------- Using ISP A NvPHSSendThroughputHints: sensorId=1, m_usecase=4, m_type=2, m_value=4294967295, m_timeout_ms=1000 SCF: Error BadValue: NvPHSSendThroughputHints (in src/common/CameraPowerHint.cpp, function sendCameraPowerHint(), line 56) CAM: serial no file already exists, skips storing againLSC: LSC surface is not based on full res! AC plugin not present: dlopen "acplugin.so", acplugin.so: cannot open shared object file: No such file or directory No library found, disabling AC plugin. NvIspAfConfigParamsSanityCheck: Error: positionWorkingHigh is not larger than positionWorkingLow positionWorkingHigh = 0, positionWorkingLow = 0 NvIspAfConfigParamsSanityCheck: Error: positionWorkingHigh is not larger than positionWorkingLow positionWorkingHigh = 0, positionWorkingLow = 0 Worker thread CaptureDispatcher start NvIspAfConfigParamsSanityCheck: Error: positionWorkingHigh is not larger than positionWorkingLow positionWorkingHigh = 0, positionWorkingLow = 0 Must retain AR: in=3864x2192 out=1920x1080 enclosing=(0.00,0.00, 1.00,1.00) firstClip=(0.00,0.00, 1.01,1.00) No output buffers for 2 No output buffers for 1 InstructionList: + GraphSettings | SensorMode: 3864x2192 BayerS16RGGB 30.0fps | output 0: 1920x1080 BL U8_V8_ER 420SP | inputClipRect 0: (0.00,0.00, 1.00,1.00) + Instruction List | id: 0 + 0: CCDataSetupStage | EstimatedIspOutLatencyFrames: 5 | NumConcurrentCaptures: 1 | UnprocessedYuvBufferMask: 0 + 1: ACSynchronizeStage + 2: AeAfApplyStage + 3: AcPluginStage | operation: opApply + 4: AcMergeStage | IspIn: [3864, 2192] | IspOut0: [3864, 2192] | IspOut1: [0, 0] | IspOut2: [640, 364] + 5: TempBufferAcquireStage | Buffer Index: 2 | BufferRequirements: 3864x2192 BL U8_V8_ER 420SP + 6: StatsBufferAcquireStage | Buffer Index: 1 | BufferRequirements: 640x364 Pitch Y8_ER 420 + 7: TempBufferAcquireStage | Buffer Index: 3 | BufferRequirements: 3864x1 Pitch NonColor8 + 8: TempBufferAcquireStage | Buffer Index: 4 | BufferRequirements: 524288x1 Pitch NonColor8 + 9: SensorISPCaptureStage | Source GUID: 1 | Output A Buffer: 2 | Output Thumb Buffer: 1 | SensorMetadata Buffer: 3 | Output IspStats Buffer: 4 + 10: StatsUpdateStage | Output Meta Buffer: 3 | Output IspStats Buffer: 4 + 11: BufferReturnStage | Output A Buffer: 3 + 12: BufferReturnStage | Output A Buffer: 4 + 13: AcPluginStage | operation: opAnalyze + 14: AfAnalysisStage + 15: BlitStage | Input Buffer: 2 | Output Buffer: 0 | Filter: Smart | Transform: None | Src Rect: [0, 0, 3864, 2192] | Dst Rect: Not used + 16: MonitorStage + 17: ExifStage + 18: MakerNoteStage + 19: BufferReturnStage | Output A Buffer: 2 + 20: BufferReturnStage | Output A Buffer: 0 + 21: MetadataReturnStage + 22: PerfStatsStage Created fiber 0x7f2c000b20 for CC 101 globalID 101 session 1 Thread 1 is working on CC 101 session 1 globalID 101 step 0 CC 101 session 1 completed step 0 in fiber 0x7f2c000b20 cc 101(1) session 1 runCount=0 runIspOut=0, latest ccId=0 CC 101 session 1 completed step 1 in fiber 0x7f2c000b20 NV AE and AfApply algorithms are active. CC 101 session 1 completed step 2 in fiber 0x7f2c000b20 CC 101 session 1 completed step 3 in fiber 0x7f2c000b20 CC 101 session 1 completed step 4 in fiber 0x7f2c000b20 Created fiber 0x7f2c000dd0 for CC 102 globalID 102 session 1 Thread 2 is working on CC 102 session 1 globalID 102 step 0 CC 102 session 1 completed step 0 in fiber 0x7f2c000dd0 cc 102(2) session 1 runCount=1 runIspOut=0, latest ccId=0 CC 102 session 1 completed step 1 in fiber 0x7f2c000dd0 NV AE and AfApply algorithms are active. CC 102 session 1 completed step 2 in fiber 0x7f2c000dd0 CC 102 session 1 completed step 3 in fiber 0x7f2c000dd0 CC 102 session 1 completed step 4 in fiber 0x7f2c000dd0 CC 101 session 1 completed step 5 in fiber 0x7f2c000b20 CC 101 session 1 completed step 6 in fiber 0x7f2c000b20 CC 101 session 1 completed step 7 in fiber 0x7f2c000b20 CC 101 session 1 completed step 8 in fiber 0x7f2c000b20 CC 101 session 1 processing step 9 in fiber 0x7f2c000b20 FiberScheduler: cc 101, session 1, fiber 0x7f2c000b20 in progress... Thread 1 getting next capture Thread 1 is waiting Thread 3 is waiting NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ writeMode: Target mode Id(0): Resolution 3864x2192 writeFrameRate: INPUT frameRate:30.000000 writeGain: INPUT gainCtrl:0 analogGain:0.000000 updateOutputSettings: OUTPUT frameRate:30.000000 updateOutputSettings: OUTPUT analogGain:1.000000 apply:----------------------- NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ writeExposure: INPUT expTime:0.033330 updateOutputSettings: OUTPUT expTime:0.033330 CC 102 session 1 completed step 5 in fiber 0x7f2c000dd0 CC 102 session 1 completed step 6 in fiber 0x7f2c000dd0 CC 102 session 1 completed step 7 in fiber 0x7f2c000dd0 CC 102 session 1 completed step 8 in fiber 0x7f2c000dd0 CC 102 session 1 processing step 9 in fiber 0x7f2c000dd0 FiberScheduler: cc 102, session 1, fiber 0x7f2c000dd0 in progress... Thread 2 getting next capture Thread 4 is waiting Thread 2 is waiting apply:----------------------- NvPclSettingsApply: Reading PCL settings PowerServiceHw:addRequest: table size: before: 0, after:1 request table for ISP 0: req[0]: output1 width=320, output1 height=200, output1 Bpp=16 req[0]: output2 width=320, output2 height=200, output2 Bpp=16 req[0]: input width=3864, input height=2192, input Bpp=12 req[0]: output width=258, output height=148, output Bpp=16 req[0]: input fps=30 req[0]: guID=1, stage type=SensorIspCapture req[0]: clock=0 Hz, iso bw=150171 KB/s, non-iso bw=0 KB/s req[450]: timeout=0 PowerServiceHwIsp:setLaBw: m_bwVal_Iso=150171 and m_bwVal_NonIso=0 KBpS PowerServiceCore:setCameraBw: totalIsoBw=150171 NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ apply:----------------------- NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ apply:----------------------- NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ apply:----------------------- NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ apply:----------------------- NvPclSettingsApply: Reading PCL settings PowerServiceHw:addRequest: table size: before: 1, after:2 request table for ISP 0: req[0]: output1 width=320, output1 height=200, output1 Bpp=16 req[0]: output2 width=320, output2 height=200, output2 Bpp=16 req[0]: input width=3864, input height=2192, input Bpp=12 req[0]: output width=258, output height=148, output Bpp=16 req[0]: input fps=30 req[0]: guID=1, stage type=SensorIspCapture req[0]: clock=0 Hz, iso bw=150171 KB/s, non-iso bw=0 KB/s req[410]: timeout=0 req[1]: output1 width=320, output1 height=200, output1 Bpp=16 req[1]: output2 width=640, output2 height=364, output2 Bpp=13 req[1]: input width=3864, input height=2192, input Bpp=12 req[1]: output width=3864, output height=2192, output Bpp=12 req[1]: input fps=30 req[1]: guID=1, stage type=SensorIspCapture req[1]: clock=0 Hz, iso bw=739556 KB/s, non-iso bw=0 KB/s req[450]: timeout=0 PowerServiceHw:updateRequests: table size: before: 2, after:2 request table for ISP 0: req[0]: output1 width=320, output1 height=200, output1 Bpp=16 req[0]: output2 width=320, output2 height=200, output2 Bpp=16 req[0]: input width=3864, input height=2192, input Bpp=12 req[0]: output width=258, output height=148, output Bpp=16 req[0]: input fps=30 req[0]: guID=1, stage type=SensorIspCapture req[0]: clock=0 Hz, iso bw=150171 KB/s, non-iso bw=0 KB/s req[405]: timeout=0 req[1]: output1 width=320, output1 height=200, output1 Bpp=16 req[1]: output2 width=640, output2 height=364, output2 Bpp=13 req[1]: input width=3864, input height=2192, input Bpp=12 req[1]: output width=3864, output height=2192, output Bpp=12 req[1]: input fps=30 req[1]: guID=1, stage type=SensorIspCapture req[1]: clock=0 Hz, iso bw=739556 KB/s, non-iso bw=0 KB/s req[445]: timeout=0 PowerServiceHwIsp:setLaBw: m_bwVal_Iso=739556 and m_bwVal_NonIso=0 KBpS PowerServiceCore:setCameraBw: totalIsoBw=739556 SCF: Error Timeout: ISP port 0 timed out! (in src/services/capture/NvIspHw.cpp, function waitIspFrameEnd(), line 478) Error: waitCsiFrameStart timeout guid 1 VI Stream Id = 2 Virtual Channel = 0 ************VI Debug Registers********** VI_CSIMUX_STAT_FRAME_8 = 0x00000000 VI_CSIMUX_FRAME_STATUS_0 = 0x00000000 VI_CFG_INTERRUPT_STATUS_0 = 0x3f000000 VI_ISPBUFA_ERROR_0 = 0x00000000 VI_FMLITE_ERROR_0 = 0x00000000 VI_NOTIFY_ERROR_0 = 0x00000000 ***************************************** CSI Stream Id = 2 Brick Id = 1 ************CSI Debug Registers********** CILA_INTR_STATUS_CILA[0x20400] = 0x00000000 CILB_INTR_STATUS_CILB[0x20c00] = 0x00000000 INTR_STATUS[0x200a4] = 0x00000000 INTR_STATUS[0x200a4] = 0x00000000 ERR_INTR_STATUS[0x200ac] = 0x00000000 ERROR_STATUS2VI_VC0[0x20094] = 0x00000000 ERROR_STATUS2VI_VC1[0x20098] = 0x00000000 ERROR_STATUS2VI_VC2[0x2009c] = 0x00000000 ERROR_STATUS2VI_VC3[0x200a0] = 0x00000000 ***************************************** SCF: Error BadValue: timestamp cannot be 0 (in src/services/capture/NvViCsiHw.cpp, function waitCsiFrameStart(), line 637) SCF: Error BadValue: (propagating from src/common/Utils.cpp, function workerThread(), line 116) SCF: Error BadValue: Worker thread ViCsiHw frameStart failed (in src/common/Utils.cpp, function workerThread(), line 133) SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceEvent.cpp, function wait(), line 59) Error: Camera HwEvents wait, this may indicate a hardware timeout occured,abort current/incoming cc Created fiber 0x7f2c000f70 for CC 103 globalID 103 session 1 Thread 5 is working on CC 103 session 1 globalID 103 step 0 Fiber 0x7f2c000f70 is aborting in CC 103 Session 1 FiberScheduler: cc 103 session 1, fiber 0x7f2c000f70 aborted FiberScheduler: fiber 0x7f2c000f70 exiting Thread 5 getting next capture Thread 5 is waiting Thread 6 is waiting Thread 7 is waiting SCF: Error Timeout: ISP Stats timed out! (in src/services/capture/NvIspHw.cpp, function waitIspStatsFinished(), line 566) FiberScheduler: cc 101, session 1, fiber 0x7f2c000b20 aborted in async operation FiberScheduler: fiber 0x7f2c000b20 exiting disposing CC 101 Session 1 Thread 8 is waiting SCF: Error BadParameter: CC has already been disposed (in src/components/CaptureContainerManager.cpp, function dispose(), line 161) CaptureService cancelling request 1 FiberScheduler: cc 102, session 1, fiber 0x7f2c000dd0 aborted in async operation FiberScheduler: fiber 0x7f2c000dd0 exiting disposing CC 102 Session 1 Thread 9 is waiting SCF: Error Timeout: ISP port 0 timed out! (in src/services/capture/NvIspHw.cpp, function waitIspFrameEnd(), line 478) SCF: Error Timeout: ISP Stats timed out! (in src/services/capture/NvIspHw.cpp, function waitIspStatsFinished(), line 566) SCF: Error Timeout: Sending critical error event (in src/api/Session.cpp, function sendErrorEvent(), line 992) SCF: Error BadParameter: CC has already been disposed (in src/components/CaptureContainerManager.cpp, function dispose(), line 161) SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceDeviceIsp.cpp, function waitCompletion(), line 423) SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceDevice.cpp, function pause(), line 949) SCF: Error Timeout: During capture abort, syncpoint wait timeout waiting for current frame to finish (in src/services/capture/CaptureServiceDevice.cpp, function handleCancelSourceRequests(), line 1032) SCF: Error Timeout: ISP port 1 timed out! (in src/services/capture/NvIspHw.cpp, function waitIspFrameEnd(), line 501) SCF: Error Timeout: ISP port 2 timed out! (in src/services/capture/NvIspHw.cpp, function waitIspFrameEnd(), line 512) SCF: Error Timeout: (propagating from src/services/capture/NvIspHw.cpp, function waitIspFrameEnd(), line 524) SCF: Error Timeout: (propagating from src/common/Utils.cpp, function workerThread(), line 116) SCF: Error Timeout: Worker thread IspHw frameComplete failed (in src/common/Utils.cpp, function workerThread(), line 133)