яв
[0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0000.033] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0000.038] I> Boot-mode: Coldboot
[0000.041] I> Chip revision : A02P
[0000.044] I> Bootrom patch version : 15 (correctly patched)
[0000.049] I> ATE fuse revision : 0x200
[0000.053] I> Ram repair fuse : 0x0
[0000.056] I> Ram Code : 0x0
[0000.058] I> rst_source : 0x0
[0000.061] I> rst_level : 0x0
[0000.065] I> Boot-device: QSPI
[0000.067] I> Qspi flash params source = brbct
[0000.071] I> Qspi using bpmp-dma
[0000.074] I> Qspi clock source : pllp
[0000.078] I> QSPI Flash Size = 32 MB
[0000.081] I> Qspi initialized successfully
[0000.085] W> No valid slot number is found in scratch register
[0000.091] W> Return default slot: _a
[0000.094] I> Active Boot chain : 0
[0000.097] I> Boot-device: QSPI
[0000.100] I> Qspi flash params source = brbct
[0000.106] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0000.113] I> Temperature = 25000
[0000.116] W> Skipping boost for clk: BPMP_CPU_NIC
[0000.121] W> Skipping boost for clk: BPMP_APB
[0000.125] W> Skipping boost for clk: AXI_CBB
[0000.129] W> Skipping boost for clk: AON_CPU_NIC
[0000.133] W> Skipping boost for clk: CAN1
[0000.137] W> Skipping boost for clk: CAN2
[0000.141] I> Boot-device: QSPI
[0000.144] I> Boot-device: QSPI
[0000.147] I> Qspi flash params source = mb1bct
[0000.151] I> Qspi using bpmp-dma
[0000.154] I> Qspi clock source : pllc_out0
[0000.157] I> Qspi reinitialized
[0000.160] I> Qspi flash params source = mb1bct
[0000.166] I> ECC region[0]: Start:0x0, End:0x0
[0000.170] I> ECC region[1]: Start:0x0, End:0x0
[0000.174] I> ECC region[2]: Start:0x0, End:0x0
[0000.178] I> ECC region[3]: Start:0x0, End:0x0
[0000.182] I> ECC region[4]: Start:0x0, End:0x0
[0000.186] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0000.192] I> Non-ECC region[1]: Start:0x0, End:0x0
[0000.197] I> Non-ECC region[2]: Start:0x0, End:0x0
[0000.201] I> Non-ECC region[3]: Start:0x0, End:0x0
[0000.206] I> Non-ECC region[4]: Start:0x0, End:0x0
[0000.211] E> FAILED: Thermal config
[0000.218] E> FAILED: MEMIO rail config
[0000.228] I> Boot-device: QSPI
[0000.231] I> Qspi flash params source = mb1bct
[0000.240] I> Qspi flash params source = mb1bct
[0000.252] I> Qspi flash params source = mb1bct
[0000.318] I> Qspi flash params source = mb1bct
[0000.327] I> Qspi flash params source = mb1bct
[0000.356] I> Qspi flash params source = mb1bct
[0000.368] I> MB1 done

[0000.375] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-feba5943)
[0000.382] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0000.387] I> Default Heap @ [0xd486400 - 0xd48a400]
[0000.392] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0000.398] W> device prod register failed
[0000.402] I> Boot-device: QSPI
[0000.405] I> Boot_device: QSPI_FLASH instance: 0
[0000.410] I> QSPI Flash Size = 32 MB
[0000.416] I> Qspi initialized successfully
[0000.420] I> qspi flash-0 params source = boot args
[0000.425] E> Failed: Unknown device 6
[0000.433] I> Found 47 partitions in QSPI_FLASH (instance 0)
[0000.439] W> No valid slot number is found in scratch register
[0000.445] W> Return default slot: _a
[0000.448] I> Active Boot chain : 0
[0000.452] I> parsing oem signed section of bpmp-fw header done
[0000.458] I> bpmp-fw binary init read from storage
[0000.463] I> oem authentication of bpmp-fw header done
[0000.478] I> bpmp-fw binary done read from storage
[0000.483] I> bpmp-fw: Authentication init Done
[0000.487] I> parsing oem signed section of cpubl header done
[0000.493] I> cpubl binary init read from storage
[0000.498] I> bpmp-fw: Authentication Finalize Done
[0000.503] I> oem authentication of cpubl header done
[0000.511] I> cpubl binary done read from storage
[0000.515] I> cpubl: Authentication init Done
[0000.520] I> parsing oem signed section of rce header done
[0000.525] I> rce binary init read from storage
[0000.530] I> Relocating BR-BCT
[0000.533] I> cpubl: Authentication Finalize Done
[0000.538] I> oem authentication of rce header done
[0000.543] I> rce binary done read from storage
[0000.548] I> rce: Authentication init Done
[0000.552] I> parsing oem signed section of ape header done
[0000.558] I> ape binary init read from storage
[0000.562] I> rce: Authentication Finalize Done
[0000.567] I> oem authentication of ape header done
[0000.572] I> ape binary done read from storage
[0000.576] I> ape: Authentication init Done
[0000.581] I> parsing oem signed section of tos header done
[0000.586] I> tos binary init read from storage
[0000.591] I> ape: Authentication Finalize Done
[0000.596] I> oem authentication of tos header done
[0000.603] I> tos binary done read from storage
[0000.607] I> tos: Authentication init Done
[0000.612] I> parsing oem signed section of bpmp-fw-dtb header done
[0000.618] I> bpmp-fw-dtb binary init read from storage
[0000.623] I> tos: Authentication Finalize Done
[0000.629] I> oem authentication of bpmp-fw-dtb header done
[0000.635] I> bpmp-fw-dtb binary done read from storage
[0000.640] I> bpmp-fw-dtb: Authentication init Done
[0000.645] I> parsing oem signed section of cpubl-dtb header done
[0000.651] I> cpubl-dtb binary init read from storage
[0000.656] I> bpmp-fw-dtb: Authentication Finalize Done
[0000.713] I> oem authentication of cpubl-dtb header done
[0000.718] I> cpubl-dtb binary done read from storage
[0000.723] I> cpubl-dtb: Authentication init Done
[0000.728] I> parsing oem signed section of eks header done
[0000.734] I> eks binary init read from storage
[0000.738] I> cpubl-dtb: Authentication Finalize Done
[0000.743] I> oem authentication of eks header done
[0000.748] I> eks binary done read from storage
[0000.752] I> eks: Authentication init Done
[0000.756] I> eks: Authentication Finalize Done
[0000.761] I> EKB detected (length: 0x410) @ VA:0x52705400
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
hwkey-agent: 40: hwkey-agent is running!!
hwkey-agent: 197: key_mgnt_processing .......
hwkey-agent: 189: Setting EKB key 0 to slot 14
hwkey-agent: 167: Init hweky-agent services!!
luks-srv: 40: luks-srv is running!!
luks-srv: 157: Init luks-srv IPC services!!
platform_bootstrap_epilog: trusty bootstrap complete