[ 88.920966] audit: type=1326 audit(1673940089.448:5): auid=4294967295 uid=0 g id=0 ses=4294967295 subj=kernel pid=2222 comm="cupsd" exe="/snap/cups/873/sbin/c upsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffffae2f6ee8 code=0x50000 [ 90.728140] watchdog: watchdog0: watchdog did not stop! [ 91.193901] Trying to unregister non-registered hwtime source [ 91.299742] arm-smmu 8000000.iommu: disabling translation [ 91.300069] arm????-smmu 10000000.??? [0000.064] I> MB1 (version: 0.23.0.0-t234-54845784-92215740) [0000.069] I> t234-A01-0-Silicon (0x12347) Prod [0000.073] I> Boot-mode : Coldboot [0000.077] I> Emulation: [0000.079] I> Entry timestamp: 0x00000000 [0000.083] I> last_boot_error: 0x0 [0000.086] I> BR-BCT: preprod_dev_sign: 0 [0000.090] I> rst_source: 0xb, rst_level: 0x1 [0000.094] I> Task: CRC check (0x5001cf71) [0000.098] I> Skip CRC check as records_integrity fuse is not burned [0000.104] I> Task: Crypto init (0x5001c0d9) [0000.108] I> Task: Secure debug controls (0x5000cb19) [0000.113] I> Task: strap war set (0x5000b739) [0000.117] I> strap value(0x4000401) set to 0x4000401 [0000.122] I> Task: Initialize SOC Therm (0x5001a509) [0000.126] I> Task: Program NV master stream id (0x5000cad1) [0000.132] I> Task: Verify boot mode (0xd482021) [0000.138] I> Task: Alias fuses (0x50010749) [0000.142] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.149] I> Task: Print SKU type (0x5000fba9) [0000.154] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.159] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.163] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.167] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.172] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.176] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.180] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.184] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.188] I> FUSE_SKU_INFO_0 = 0xd0 [0000.192] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.196] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.199] I> SKU: Prod [0000.201] I> Task: Boost clocks (0x50013db1) [0000.206] I> Initializing PLLC2 for AXI_CBB. [0000.210] I> AXI_CBB : src = 35, divisor = 0 [0000.214] I> Task: Voltage monitor (0x50013dbd) [0000.218] I> VMON: Vmon re-calibration and fine tuning done [0000.224] I> Task: UPHY init (0x5000da39) [0000.228] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.233] I> Task: Boot device init (0x50000a3d) [0000.238] I> Boot_device: QSPI_FLASH instance: 0 [0000.242] I> Qspi clock source : pllc_out0 [0000.246] I> QSPI Flash: Macronix 64MB [0000.250] I> QSPI-0l initialized successfully [0000.254] I> Task: TSC init (0x5001ed35) [0000.258] I> Task: Load membct (0x5001190d) [0000.262] I> RAM_CODE 0x4000401 [0000.265] I> Loading MEM-BCT to SysRAM [0000.269] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.274] I> Slot: 0 [0000.276] I> Binary[0] block-0 (partition size: 0x40000) [0000.281] I> get_binary_info: Binary name: MEM-BCT-0 [0000.286] I> Size of crypto header is 8192 [0000.290] I> BCH load address is : 0x40050000 [0000.294] I> Size of crypto header is 8192 [0000.298] I> BCH of MEM-BCT-0 read from storage [0000.303] I> BCH address is : 0x40050000 [0000.307] I> MEM-BCT-0 header integrity check is success [0000.312] I> Binary magic in BCH component 0 is MEM0 [0000.317] I> component binary type is 0 [0000.321] I> MEM-BCT-0 binary is read from storage [0000.326] I> MEM-BCT-0 binary integrity check is success [0000.331] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.338] I> RAM_CODE 0x4000401 [0000.343] I> RAM_CODE 0x4000401 [0000.347] I> Task: Load Page retirement list (0x50011139) [0000.352] I> Task: SDRAM params override (0x50011b79) [0000.357] I> Task: Save mem-bct info (0x50014071) [0000.361] I> Task: Carveout allocate (0x500140d5) [0000.366] I> RCM blob carveout will not be allocated [0000.371] I> ECC region[0]: Start:0x0, End:0x0 [0000.375] I> ECC region[1]: Start:0x0, End:0x0 [0000.379] I> ECC region[2]: Start:0x0, End:0x0 [0000.384] I> ECC region[3]: Start:0x0, End:0x0 [0000.388] I> ECC region[4]: Start:0x0, End:0x0 [0000.392] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.398] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.403] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.407] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.412] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.422] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.429] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.436] I> allocated(CO:39) base:0x83a000000 size:0x6000000 align: 0x200000 [0000.443] I> allocated(CO:20) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.450] I> allocated(CO:24) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.457] I> allocated(CO:28) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.464] I> allocated(CO:29) base:0x832000000 size:0x2000000 align: 0x2000000 [0000.471] I> allocated(CO:43) base:0x830000000 size:0x2000000 align: 0x200000 [0000.478] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.485] I> allocated(CO:41) base:0x82f000000 size:0x1000000 align: 0x100000 [0000.492] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.499] I> allocated(CO:03) base:0x82e800000 size:0x800000 align: 0x800000 [0000.506] I> allocated(CO:06) base:0x82e000000 size:0x800000 align: 0x800000 [0000.513] I> allocated(CO:10) base:0x82d800000 size:0x800000 align: 0x800000 [0000.520] I> allocated(CO:56) base:0x82d000000 size:0x800000 align: 0x200000 [0000.527] I> allocated(CO:07) base:0x82cc00000 size:0x400000 align: 0x400000 [0000.534] I> allocated(CO:33) base:0x82c800000 size:0x400000 align: 0x200000 [0000.541] I> allocated(CO:47) base:0x82c400000 size:0x400000 align: 0x200000 [0000.548] I> allocated(CO:72) base:0x82c200000 size:0x200000 align: 0x10000 [0000.555] I> allocated(CO:01) base:0x82c100000 size:0x100000 align: 0x100000 [0000.562] I> allocated(CO:04) base:0x82c000000 size:0x100000 align: 0x100000 [0000.568] I> allocated(CO:05) base:0x82bf00000 size:0x100000 align: 0x100000 [0000.575] I> allocated(CO:08) base:0x82be00000 size:0x100000 align: 0x100000 [0000.582] I> allocated(CO:09) base:0x82bd00000 size:0x100000 align: 0x100000 [0000.589] I> allocated(CO:15) base:0x82bc00000 size:0x100000 align: 0x100000 [0000.596] I> allocated(CO:17) base:0x82bb00000 size:0x100000 align: 0x100000 [0000.603] I> allocated(CO:23) base:0x82ba00000 size:0x100000 align: 0x100000 [0000.610] I> allocated(CO:27) base:0x82b900000 size:0x100000 align: 0x100000 [0000.617] I> allocated(CO:42) base:0x82b800000 size:0x100000 align: 0x100000 [0000.624] I> allocated(CO:54) base:0x82b780000 size:0x80000 align: 0x80000 [0000.631] I> allocated(CO:26) base:0x82b740000 size:0x40000 align: 0x2000 [0000.637] I> allocated(CO:48) base:0x82b720000 size:0x20000 align: 0x10000 [0000.644] I> allocated(CO:69) base:0x82b700000 size:0x20000 align: 0x10000 [0000.651] I> allocated(CO:34) base:0x82b6f0000 size:0x10000 align: 0x10000 [0000.657] I> allocated(CO:35) base:0x82b6e0000 size:0x10000 align: 0x10000 [0000.664] I> allocated(CO:49) base:0x82b6d0000 size:0x10000 align: 0x10000 [0000.671] I> allocated(CO:50) base:0x82b6c0000 size:0x10000 align: 0x10000 [0000.678] I> allocated(CO:52) base:0x82b6b0000 size:0x10000 align: 0x10000 [0000.684] I> Task: Thermal check (0x5001fba1) [0000.689] I> max_chip_limit = 115 [0000.692] I> min_chip_limit = -30 [0000.695] I> max temp read = 25 [0000.698] I> min temp read = 23 [0000.701] I> Task: Update FSI SCR with thermal fuse data (0x5001fc3d) [0000.707] I> Task: Enable WDT 5th expiry (0x5001f929) [0000.712] I> Task: Disable WDT globally (0x5001f965) [0000.717] I> Task: I2C register (0x50000a31) [0000.721] I> Task: Reset FSI (0x50013db9) [0000.725] I> Task: Pinmux init (0x50013219) [0000.729] I> Task: Prod config init (0x50013631) [0000.734] I> Task: Pad voltage init (0x500132a5) [0000.738] I> Task: Prod init (0x500136d5) [0000.742] I> Task: Common rail init (0x50013bd1) [0000.747] W> Thermal config not found in BCT [0000.751] W> Generic i2c config not found in BCT [0000.755] W> Platform rail config not found in BCT [0000.761] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.769] W> MEMIO rail config not found in BCT [0000.774] I> Task: Mem clock src (0x500119c5) [0000.778] I> Task: Misc. board config (0x50013c29) [0000.782] W> Platform config not found in BCT [0000.787] I> Task: SDRAM init (0x500119c9) [0000.793] I> SDRAM-params @ 0xd485000 [0000.797] I> MSS code-drop: NvBootSdramInit [0000.801] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision : 8 [0000.808] I> MSS CAR: Init PLLM [0000.811] I> MSS CAR: Init PLLHUB [0000.816] I> Encryption: MTS: en, TX: dis, VPR: dis, GSC: en [0000.828] I> mb1_sdram_init Done ! [0000.831] I> SDRAM Size in Total 0x800000000 [0000.835] I> Task: Dram Ecc scrub (0x50011261) [0000.839] I> Task: DRAM alias check (0x50011b71) [0000.871] I> Task: Program NSDRAM carveout (0x50014921) [0000.877] I> NSDRAM carveout encryption is disabled [0000.882] I> Program NSDRAM carveout [0000.886] I> Task: Register checker (0x50011b75) [0000.895] I> Task: Enable clock-mon (0x5001ed25) [0000.912] I> FMON: Fmon re-programming done [0000.916] I> Task: Mapper init (0x5001d451) [0000.921] I> Task: SC7 Context Init (0x5001f02d) [0000.927] I> Task: CCPLEX IST init (0x5000d335) [0000.933] I> Task: CPU WP0 (0x5000c635) [0000.939] I> Loading MCE [0000.941] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.947] I> Slot: 0 [0000.949] I> Binary[8] block-0 (partition size: 0x80000) [0000.955] I> get_binary_info: Binary name: MCE [0000.960] I> Size of crypto header is 8192 [0000.965] I> BCH load address is : 0x4003e000 [0000.970] I> Size of crypto header is 8192 [0000.975] I> BCH of MCE read from storage [0000.979] I> BCH address is : 0x4003e000 [0000.985] I> MCE header integrity check is success [0000.990] I> Binary magic in BCH component 0 is MTSM [0000.995] I> component binary type is 8 [0000.999] I> Size of crypto header is 8192 [0001.006] I> MCE binary is read from storage [0001.011] I> MCE binary integrity check is success [0001.016] I> Binary MCE loaded successfully at 0x40000000 (0x2c080) [0001.024] I> Size of crypto header is 8192 [0001.038] I> Size of crypto header is 8192 [0001.043] I> Sending WP0 mailbox command to PSC [0001.053] I> Task: MB1 fixed firewalls (0x5001e55d) [0001.072] I> Task: Load bpmp-fw (0x5001e801) [0001.078] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.084] I> Slot: 0 [0001.086] I> Binary[15] block-0 (partition size: 0x180000) [0001.092] I> get_binary_info: Binary name: BPMP_FW [0001.098] I> Size of crypto header is 8192 [0001.102] I> BCH load address is : 0x807fe000 [0001.108] I> Size of crypto header is 8192 [0001.113] I> BCH of BPMP_FW read from storage [0001.117] I> BCH address is : 0x807fe000 [0001.123] I> BPMP_FW header integrity check is success [0001.128] I> Binary magic in BCH component 0 is BPMF [0001.133] I> component binary type is 15 [0001.138] I> Size of crypto header is 8192 [0001.153] I> BPMP_FW binary is read from storage [0001.160] I> BPMP_FW binary integrity check is success [0001.165] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfb3c0) [0001.174] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.179] I> Slot: 0 [0001.182] I> Binary[16] block-10000 (partition size: 0x400000) [0001.189] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.194] I> Size of crypto header is 8192 [0001.199] I> BCH load address is : 0x807fc000 [0001.204] I> Size of crypto header is 8192 [0001.209] I> BCH of BPMP_FW_DTB read from storage [0001.214] I> BCH address is : 0x807fc000 [0001.220] I> BPMP_FW_DTB header integrity check is success [0001.225] I> Binary magic in BCH component 0 is BPMD [0001.231] I> component binary type is 16 [0001.235] I> Size of crypto header is 8192 [0001.241] I> BPMP_FW_DTB binary is read from storage [0001.247] I> BPMP_FW_DTB binary integrity check is success [0001.253] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20440) [0001.262] I> Task: Load psc-fw (0x5001ea0d) [0001.267] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.273] I> Slot: 0 [0001.276] I> Binary[17] block-0 (partition size: 0xc0000) [0001.282] I> get_binary_info: Binary name: PSC_FW [0001.287] I> Size of crypto header is 8192 [0001.291] I> BCH load address is : 0x80ffe000 [0001.297] I> Size of crypto header is 8192 [0001.302] I> BCH of PSC_FW read from storage [0001.306] I> BCH address is : 0x80ffe000 [0001.312] I> PSC_FW header integrity check is success [0001.317] I> Binary magic in BCH component 0 is PFWP [0001.322] I> component binary type is 17 [0001.327] I> Size of crypto header is 8192 [0001.337] I> PSC_FW binary is read from storage [0001.343] I> PSC_FW binary integrity check is success [0001.348] I> Binary PSC_FW loaded successfully at 0x80000000 (0x7d000) [0001.357] I> Task: Load nvdec-fw (0x5001ea81) [0001.362] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.368] I> Slot: 0 [0001.370] I> Binary[7] block-0 (partition size: 0x100000) [0001.377] I> get_binary_info: Binary name: NVDEC [0001.382] I> Size of crypto header is 8192 [0001.386] I> BCH load address is : 0x800fe000 [0001.392] I> Size of crypto header is 8192 [0001.397] I> BCH of NVDEC read from storage [0001.401] I> BCH address is : 0x800fe000 [0001.406] I> NVDEC header integrity check is success [0001.412] I> Binary magic in BCH component 0 is NDEC [0001.417] I> component binary type is 7 [0001.421] I> Size of crypto header is 8192 [0001.428] I> NVDEC binary is read from storage [0001.434] I> NVDEC binary integrity check is success [0001.439] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.450] I> Task: Load tsec-fw (0x5001ec6d) [0001.455] I> TSEC-FW load support not enabled [0001.459] I> Task: Program misc carveouts (0x5001445d) [0001.466] I> Program IPC carveouts [0001.473] I> Task: GPIO interrupt map (0x50013cc5) [0001.479] I> Task: SC7 context save (0x5001f161) [0001.485] I> NV_SC7 Context addr: 0xa0000000 [0001.490] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.496] I> Slot: 0 [0001.499] I> Binary[27] block-0 (partition size: 0x100000) [0001.505] I> get_binary_info: Binary name: BR_BCT [0001.510] I> Size of crypto header is 8192 [0001.514] I> Size of crypto header is 8192 [0001.519] I> BR_BCT binary is read from storage [0001.525] I> BR_BCT binary integrity check is success [0001.530] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.538] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.544] I> Slot: 0 [0001.546] I> Binary[13] block-0 (partition size: 0x30000) [0001.552] I> get_binary_info: Binary name: SC7-FW [0001.557] I> Size of crypto header is 8192 [0001.562] I> Size of crypto header is 8192 [0001.566] I> BCH load address is : 0xa0002000 [0001.572] I> Size of crypto header is 8192 [0001.577] I> BCH of SC7-FW read from storage [0001.581] I> BCH address is : 0xa0002000 [0001.587] I> SC7-FW header integrity check is success [0001.592] I> Binary magic in BCH component 0 is WB0B [0001.597] I> component binary type is 13 [0001.602] I> Size of crypto header is 8192 [0001.608] I> SC7-FW binary is read from storage [0001.613] I> SC7-FW binary integrity check is success [0001.619] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x25460) [0001.627] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.633] I> Slot: 0 [0001.635] I> Binary[22] block-0 (partition size: 0x30000) [0001.641] I> get_binary_info: Binary name: PSC_RF [0001.646] I> Size of crypto header is 8192 [0001.651] I> Size of crypto header is 8192 [0001.655] I> BCH load address is : 0xa0029460 [0001.661] I> Size of crypto header is 8192 [0001.666] I> BCH of PSC_RF read from storage [0001.670] I> BCH address is : 0xa0029460 [0001.676] I> PSC_RF header integrity check is success [0001.681] I> Binary magic in BCH component 0 is PSCR [0001.687] I> component binary type is 22 [0001.691] I> Size of crypto header is 8192 [0001.697] I> PSC_RF binary is read from storage [0001.702] I> PSC_RF binary integrity check is success [0001.708] I> Binary PSC_RF loaded successfully at 0xa002b460 (0x1bd20) [0001.728] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.733] I> Slot: 0 [0001.736] I> Binary[14] block-0 (partition size: 0x20000) [0001.742] I> get_binary_info: Binary name: MB2_RF [0001.747] I> Size of crypto header is 8192 [0001.752] I> Size of crypto header is 8192 [0001.756] I> BCH load address is : 0xa008e240 [0001.762] I> Size of crypto header is 8192 [0001.766] I> BCH of MB2_RF read from storage [0001.771] I> BCH address is : 0xa008e240 [0001.777] I> MB2_RF header integrity check is success [0001.782] I> Binary magic in BCH component 0 is MB2R [0001.787] I> component binary type is 14 [0001.791] I> Size of crypto header is 8192 [0001.797] I> MB2_RF binary is read from storage [0001.803] I> MB2_RF binary integrity check is success [0001.808] I> Binary MB2_RF loaded successfully at 0xa0090240 (0x1bdc0) [0001.817] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.825] I> SC7 context fuse-bypass data is empty [0001.833] I> SC7 context save done [0001.837] I> Task: Load MB2/Applet/FSKP (0x5000d451) [0001.843] I> Loading MB2 [0001.846] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.852] I> Slot: 0 [0001.854] I> Binary[6] block-0 (partition size: 0x80000) [0001.860] I> get_binary_info: Binary name: MB2 [0001.865] I> Size of crypto header is 8192 [0001.869] I> BCH load address is : 0x8007e000 [0001.875] I> Size of crypto header is 8192 [0001.880] I> BCH of MB2 read from storage [0001.884] I> BCH address is : 0x8007e000 [0001.890] I> MB2 header integrity check is success [0001.895] I> Binary magic in BCH component 0 is MB2B [0001.900] I> component binary type is 6 [0001.904] I> Size of crypto header is 8192 [0001.913] I> MB2 binary is read from storage [0001.919] I> MB2 binary integrity check is success [0001.924] I> Binary MB2 loaded successfully at 0x80000000 (0x686c0) [0001.932] I> Task: Map CCPLEX SHARED carveout (0x5000d521) [0001.939] I> Task: Prepare MB2 params (0x5000d5dd) [0001.948] I> MB2-params @ 0x40060000 [0001.956] I> BR-BCT Boot Chain Fields [0001.959] I> u32_non_gpio_select_boot_chain : 0 [0001.965] I> u32_num_boot_chains : 2 [0001.970] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.976] I> Task: Dram ecc test (0x500112cd) [0001.981] I> Task: Misc NV security settings (0x5000ced5) [0001.988] I> NVDEC sticky bits programming done [0001.993] I> Task: Disable/Reload WDT (0x5001f991) [0001.999] I> Programmed SLCG global override := 0x0 [0002.004] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e33bc3dc) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f28e8 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x82d000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e6c) I> Task: Enable hot-plug capability (0x50020e7c) I> Task: PSC mailbox init (0x50011ed0) I> Task: Crypto init (0x5000513c) I> Task: Enable GP-SE clock (0x50001fd0) I> Task: I2C register (0x50001e30) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e18) I> Task: Boot device init (0x50001d60) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d5c) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50017428) I> Task: Load AUXP FWs (0x50020a1c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82be00000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82bb00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x838000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9481872 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x838000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82cc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82bf00000 I> Task: Carveout setup (0x50019c94) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50011da4) I> Task: Enable FSI VMON (0x50011944) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x5001199c) I> FSITHERM max temp = 25 I> FSITHERM min temp = 24 I> Task: Restore XUSB sec (0x50001d30) I> Task: Enable FSI SE clock (0x5001232c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f34) I> Task: Initialize CPUBL Params (0x50013384) I> CPUBL-params @ 0x834000000 I> Task: Prepare eeprom data (0x50013140) I> Task: OEM firewalls (0x5001df14) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> OEM firewalls configured I> Task: Unhalt AUXPs (0x50020c84) I> Unhalting SPE.. I> Enabling combined UART ????spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 2e3d77fae66a40ac8e7a91531ae7d9b3 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ?? I> Task: Trigger mailbox for PSC-BL1 exit (0x50011f50) I> Sending opcode 0x4d420802 to psc ??INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848000000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: e061f86-9e1f578-2508c43-dev-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ??I> Received ACK from psc I> Task: Sta??INFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 ?? ??rt secure NOR provision (0x50014924) I> Task: Load FSI keyblob (0x50012368) I> Skipping FSI key blob copy I> Task: Unhalt AUXPs (0x50020c8c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5001347c) I> Task: Load TOS (0x50013b38) I> Task: Load and authenticate registered FWs (0x50017428) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bo??[ 2.391346] Camera-FW on t234-rce-safe started ??bpmp: init bpmp: base binary md5 is eac380526d68ff45ffc86d0feae98e88 bpmp: combined binary md5 is 888a114dda6bea50b6c6bb224445ac85 bpmp: firmware tag is 888a114dda6bea50b6c6-eac380526d6 initialized vwdt initialized mail_early ??TCU early??INFO: MONITOR: populated user images:19 INF??initialized fuse ini?? console ??O: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_i??tialized vfrel initialized hwwd??nit... INFO: enter idle task. ??enabled. ??t initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ??otloader I> Size of partition:??initialized avfs_clk_platform initialized powergate ?? ?? 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-b??ini tialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq ??ootloader ??initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mce_dbell missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ??I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary??initialized clk_cal_late initialized noc_late initialized dmce initialized cvc ??@ device:3/0 block-32000 (partition ??initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable adspneon enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable nvdec enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable??[ 2.623389] Camer?? xusb_fs enable xusb_falcon enable xusb_core_mux ena??a-FW on t234-rce-safe??ble dsi_lp enable sdmmc_legacy_tm initialized clk_mac?? ready SHA1=7a10e461 ??h_post initialized pg_post initialized regulator_post initialized profile ??(crt 13.247 ms, total boot 254.587 ms) ??initialized fuse_late initialized mrq initialized patrol_scrubber initialized extras_post bpmp: init complete ??size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x82c400000 ??DCE: FW Boot Done ??I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x831e06000 I> Relocating OP-TEE dtb from: 0x831eff700 to 0x82b700000, size: 0x996 I> [0] START: 0x80000000, SIZE: 0x7ab600000 I> [1] START: 0x82c400000, SIZE: 0x400000 I> [2] START: 0x82d000000, SIZE: 0x800000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x82d000400 I> EKB detected (length: 0x410) @ VA:0x82d000400 I> Task: Prepare TOS params (0x50013ab0) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82b700000 I> Task: OEM SC7 context save (0x500146bc) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x50020d18) I> Task: Program display sticky bits (0x50020c94) I> Task: Storage device deinit (0x50001ed8) I> Task: SMMU external bypass disable (0x50011eb4) I> Task: SMMU init (0x50011dd0) I> Task: Program CBB PCIE AMAP regions (0x50014b08) I> Task: Program GICv3 registers (0x50020db8) I> Task: Audit firewall settings (0x5001e1c0) I> Task: Bootchain failure check (0x500026a4) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ??NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03:23:19 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/ porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping produ ct! E/TC:00 0 jetson_user_key_pta_init:700 jetson_user_key_pta_init: Failed (f010000 6). E/TC:00 0 call_initcalls:43 Initcall __text_start + 0x000dab50 failed I/TC: Primary CPU switching to normal world boot ?? Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ??I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ??[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x805405a98 SMBIOS=0xffff0000 SMBIOS 3.0=0x8039b0000 MEMATTR=0x80476d018 ESRT=0x8039c0f98 RNG=0x827905998 MEMRESERVE=0x80476ef18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008039c0f98 to 0x00000008039c0fd0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000817800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000835ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000007ffffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x00000008021bffff] [ 0.000000] node 0: [mem 0x00000008021c0000-0x0000000803565fff] [ 0.000000] node 0: [mem 0x0000000803566000-0x0000000803700fff] [ 0.000000] node 0: [mem 0x0000000803701000-0x000000080399ffff] [ 0.000000] node 0: [mem 0x00000008039a0000-0x00000008039bffff] [ 0.000000] node 0: [mem 0x00000008039c0000-0x000000080453ffff] [ 0.000000] node 0: [mem 0x0000000804540000-0x00000008046cffff] [ 0.000000] node 0: [mem 0x00000008046d0000-0x000000080473ffff] [ 0.000000] node 0: [mem 0x0000000804740000-0x000000080475ffff] [ 0.000000] node 0: [mem 0x0000000804760000-0x000000080477ffff] [ 0.000000] node 0: [mem 0x0000000804780000-0x000000080499ffff] [ 0.000000] node 0: [mem 0x00000008049a0000-0x00000008049bffff] [ 0.000000] node 0: [mem 0x00000008049c0000-0x0000000804a0ffff] [ 0.000000] node 0: [mem 0x0000000804a10000-0x0000000804a9ffff] [ 0.000000] node 0: [mem 0x0000000804aa0000-0x0000000804e4ffff] [ 0.000000] node 0: [mem 0x0000000804e50000-0x0000000804e5ffff] [ 0.000000] node 0: [mem 0x0000000804e60000-0x0000000804e6ffff] [ 0.000000] node 0: [mem 0x0000000804e70000-0x0000000804e7ffff] [ 0.000000] node 0: [mem 0x0000000804e80000-0x0000000804ebffff] [ 0.000000] node 0: [mem 0x0000000804ec0000-0x000000080534ffff] [ 0.000000] node 0: [mem 0x0000000805350000-0x000000080539ffff] [ 0.000000] node 0: [mem 0x00000008053a0000-0x00000008053cffff] [ 0.000000] node 0: [mem 0x00000008053d0000-0x00000008053effff] [ 0.000000] node 0: [mem 0x00000008053f0000-0x000000080553ffff] [ 0.000000] node 0: [mem 0x0000000805540000-0x00000008055dffff] [ 0.000000] node 0: [mem 0x00000008055e0000-0x000000080568ffff] [ 0.000000] node 0: [mem 0x0000000805690000-0x000000080572ffff] [ 0.000000] node 0: [mem 0x0000000805730000-0x00000008057bffff] [ 0.000000] node 0: [mem 0x00000008057c0000-0x000000080585ffff] [ 0.000000] node 0: [mem 0x0000000805860000-0x000000080612ffff] [ 0.000000] node 0: [mem 0x0000000806130000-0x000000080630ffff] [ 0.000000] node 0: [mem 0x0000000806310000-0x00000008278bffff] [ 0.000000] node 0: [mem 0x00000008278c0000-0x000000082790ffff] [ 0.000000] node 0: [mem 0x0000000827910000-0x000000082b6affff] [ 0.000000] node 0: [mem 0x000000082c400000-0x000000082c7fffff] [ 0.000000] node 0: [mem 0x0000000834000000-0x0000000835ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000835ffffff] [ 0.000000] On node 0, zone Normal: 336 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7925040 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 30994412K/32205504K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 948948K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000746] Console: colour dummy device 80x25 [ 0.000937] printk: console [tty0] enabled [ 0.000975] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000984] pid_max: default: 32768 minimum: 301 [ 0.001044] LSM: Security Framework initializing [ 0.001065] Yama: becoming mindful. [ 0.001083] SELinux: Initializing. [ 0.001167] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001213] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003067] rcu: Hierarchical SRCU implementation. [ 0.003152] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003660] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.003669] DTB Build time: Aug 10 2022 20:31:40 [ 0.005095] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.005208] Remapping and enabling EFI services. [ 0.006428] smp: Bringing up secondary CPUs ... [ 0.035089] Detected PIPT I-cache on CPU1 [ 0.035120] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035149] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.063753] Detected PIPT I-cache on CPU2 [ 0.063763] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.063776] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.092344] Detected PIPT I-cache on CPU3 [ 0.092354] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.092366] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.122978] Detected PIPT I-cache on CPU4 [ 0.122998] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123022] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.151653] Detected PIPT I-cache on CPU5 [ 0.151662] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.151677] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.180273] Detected PIPT I-cache on CPU6 [ 0.180283] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.180298] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.208896] Detected PIPT I-cache on CPU7 [ 0.208906] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.208921] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.239547] Detected PIPT I-cache on CPU8 [ 0.239569] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.239596] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.268220] Detected PIPT I-cache on CPU9 [ 0.268230] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.268244] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.297452] Detected PIPT I-cache on CPU10 [ 0.297462] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.297476] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.326679] Detected PIPT I-cache on CPU11 [ 0.326690] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.326703] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.326759] smp: Brought up 1 node, 12 CPUs [ 0.326822] SMP: Total of 12 processors activated. [ 0.326828] CPU features: detected: Privileged Access Never [ 0.326831] CPU features: detected: LSE atomic instructions [ 0.326833] CPU features: detected: User Access Override [ 0.326836] CPU features: detected: 32-bit EL0 Support [ 0.326839] CPU features: detected: Common not Private translations [ 0.326842] CPU features: detected: RAS Extension Support [ 0.326844] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.326847] CPU features: detected: CRC32 instructions [ 0.326850] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.360060] CPU: All CPU(s) started at EL2 [ 0.362308] devtmpfs: initialized [ 0.377610] Registered cp15_barrier emulation handler [ 0.377622] Registered setend emulation handler [ 0.377628] KASLR enabled [ 0.377731] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.377745] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.379188] pinctrl core: initialized pinctrl subsystem [ 0.379674] SMBIOS 3.0.0 present. [ 0.379680] DMI: /, BIOS 1.0-d7fb19b 08/10/2022 [ 0.379925] NET: Registered protocol family 16 [ 0.380722] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.380921] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.381124] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.381149] audit: initializing netlink subsys (disabled) [ 0.381232] audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1 [ 0.381379] thermal_sys: Registered thermal governor 'step_wise' [ 0.381381] thermal_sys: Registered thermal governor 'power_allocator' [ 0.381386] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.383478] cpuidle: using governor menu [ 0.383586] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.383707] ASID allocator initialised with 32768 entries [ 0.383792] Serial: AMBA PL011 UART driver [ 0.385336] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.385359] Tegra reboot handler registered. [ 0.403084] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.403099] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.403106] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.403113] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.403119] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.403125] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.403132] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.403139] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.403145] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.403151] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.403157] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.403164] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.403170] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.403177] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.403183] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.403189] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.403197] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.403206] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.403227] mc-err: mcerr ops are set to t23x [ 0.403485] tegra234-cbb 13a00000.cbb-fabric: secure_irq = 21 [ 0.403547] tegra234-cbb c600000.aon-fabric: secure_irq = 22 [ 0.403586] tegra234-cbb d600000.bpmp-fabric: secure_irq = 23 [ 0.403623] tegra234-cbb de00000.dce-fabric: secure_irq = 24 [ 0.403658] tegra234-cbb be00000.rce-fabric: secure_irq = 25 [ 0.403695] tegra234-cbb b600000.sce-fabric: secure_irq = 26 [ 0.403894] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 66, base_baud = 0) is a SBSA [ 0.407842] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.407848] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.407852] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.407855] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.409421] ACPI: Interpreter disabled. [ 0.410589] vdd-av1v1-hub: supplied by vdd-5v-sys [ 0.410752] vbusA-cvb: supplied by vdd-5v-sys [ 0.410866] vbusB-cvb: supplied by vdd-5v-sys [ 0.410982] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 0.411082] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 0.411351] iommu: Default domain type: Translated [ 0.411391] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.411554] SCSI subsystem initialized [ 0.411620] usbcore: registered new interface driver usbfs [ 0.411636] usbcore: registered new interface driver hub [ 0.411649] usbcore: registered new device driver usb [ 0.411825] mc: Linux media interface: v0.10 [ 0.411841] videodev: Linux video capture interface: v2.00 [ 0.411984] pps_core: LinuxPPS API ver. 1 registered [ 0.411989] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411998] PTP clock support registered [ 0.412216] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412239] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.413563] Registered efivars operations [ 0.414054] FPGA manager framework [ 0.414094] Advanced Linux Sound Architecture Driver Initialized. [ 0.414336] Bluetooth: Core ver 2.22 [ 0.414350] NET: Registered protocol family 31 [ 0.414353] Bluetooth: HCI device and connection manager initialized [ 0.414361] Bluetooth: HCI socket layer initialized [ 0.414365] Bluetooth: L2CAP socket layer initialized [ 0.414372] Bluetooth: SCO socket layer initialized [ 0.415032] camchar: rtcpu character device driver loaded [ 0.415288] clocksource: Switched to clocksource arch_sys_counter [ 0.576062] VFS: Disk quotas dquot_6.6.0 [ 0.576103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.576225] pnp: PnP ACPI: disabled [ 0.577981] la/ptsa driver initialized. [ 0.578034] NET: Registered protocol family 2 [ 0.578226] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.580414] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.580454] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.580653] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.581088] TCP: Hash tables configured (established 262144 bind 65536) [ 0.581163] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.581221] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.581344] NET: Registered protocol family 1 [ 0.581594] RPC: Registered named UNIX socket transport module. [ 0.581606] RPC: Registered udp transport module. [ 0.581609] RPC: Registered tcp transport module. [ 0.581612] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.581624] PCI: CLS 0 bytes, default 64 [ 0.581748] Trying to unpack rootfs image as initramfs... [ 0.690629] Freeing initrd memory: 8196K [ 0.692588] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.692751] kvm [1]: IPA Size Limit: 48 bits [ 0.692909] kvm [1]: VHE mode initialized successfully [ 0.693528] Initialise system trusted keyrings [ 0.693612] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 0.695567] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.695805] NFS: Registering the id_resolver key type [ 0.695818] Key type id_resolver registered [ 0.695821] Key type id_legacy registered [ 0.695854] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.695863] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.695875] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.707694] NET: Registered protocol family 38 [ 0.707702] Key type asymmetric registered [ 0.707706] Asymmetric key parser 'x509' registered [ 0.707724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.707781] io scheduler mq-deadline registered [ 0.707786] io scheduler kyber registered [ 0.711509] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.711536] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.711552] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.711566] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.713874] tegra_dc_assign_hw_data: no matching compatible node [ 0.713881] tegradccommon module_init failed [ 0.713885] tegradc module_init failed [ 0.714121] EINJ: ACPI disabled. [ 0.715593] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.715601] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.715605] tegra-pmc: ### PMC reset level: L1 [ 0.715608] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.716771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.723968] random: fast init done [ 0.724107] printk: console [ttyTCU0] enabled [ 2.400227] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.406110] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.410659] arm-smmu 12000000.iommu: stage 1 translation [ 2.416010] arm-smmu 12000000.iommu: stage 2 translation [ 2.421508] arm-smmu 12000000.iommu: nested translation [ 2.426672] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.433846] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 2.442401] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.446969] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.453352] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.460683] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.466391] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.471116] arm-smmu 10000000.iommu: stage 1 translation [ 2.476630] arm-smmu 10000000.iommu: stage 2 translation [ 2.482053] arm-smmu 10000000.iommu: nested translation [ 2.487481] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.494654] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 2.503220] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.507866] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.514428] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.521405] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.527560] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.532280] arm-smmu 8000000.iommu: stage 1 translation [ 2.537790] arm-smmu 8000000.iommu: stage 2 translation [ 2.543214] arm-smmu 8000000.iommu: nested translation [ 2.548378] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.555553] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.564071] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.568765] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.575328] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.582591] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.592215] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.595549] tegra_profiler: auth: init [ 2.599595] nvsciipc: loaded module [ 2.603900] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 2.609048] tegra23x-qspi 3270000.spi: Node prod has invalid entries [ 2.615229] tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting [ 2.622404] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 2.629842] tegra23x-qspi 3270000.spi: Prod settings list not found [ 2.636161] tegra23x-qspi 3270000.spi: Failed to get reset control: -517 [ 2.643357] tun: Universal TUN/TAP device driver, 1.6 [ 2.648424] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.655307] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.660838] e1000e: Intel(R) PRO/1000 Network Driver [ 2.665626] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.671504] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.676828] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.682572] PPP generic driver version 2.4.2 [ 2.686938] PPP BSD Compression module registered [ 2.691532] PPP Deflate Compression module registered [ 2.696616] PPP MPPE Compression module registered [ 2.701613] usbcore: registered new interface driver r8152 [ 2.707113] usbcore: registered new interface driver asix [ 2.712537] usbcore: registered new interface driver ax88179_178a [ 2.718664] usbcore: registered new interface driver cdc_ether [ 2.724611] usbcore: registered new interface driver net1080 [ 2.730210] usbcore: registered new interface driver cdc_subset [ 2.736247] usbcore: registered new interface driver zaurus [ 2.741938] usbcore: registered new interface driver cdc_ncm [ 2.747621] usbcore: registered new interface driver aqc111 [ 2.753146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.759348] ohci-pci: OHCI PCI platform driver [ 2.763640] ohci-platform: OHCI generic platform driver [ 2.768974] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 2.774918] usbcore: registered new interface driver uas [ 2.779925] usbcore: registered new interface driver usb-storage [ 2.785909] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 2.791647] mousedev: PS/2 mouse device common for all mice [ 2.797072] usbcore: registered new interface driver xpad [ 2.804355] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.807830] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.815614] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.821866] i2c /dev entries driver [ 2.825419] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 2.831018] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 2.836430] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 2.841814] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 2.847152] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 2.852658] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 2.858082] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 2.863420] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 2.870785] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 2.877035] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 2.886046] device-mapper: uevent: version 1.0.3 [ 2.889981] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.899582] sdhci: Secure Digital Host Controller Interface driver [ 2.904679] sdhci: Copyright(c) Pierre Ossman [ 2.909139] Synopsys Designware Multimedia Card Interface Driver [ 2.915251] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.921270] sdhci-tegra 3460000.sdhci: Adding to iommu group 4 [ 2.921398] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.921419] sdhci-tegra 3400000.sdhci: Adding to iommu group 5 [ 2.940486] tegra-bpmp bpmp: firmware: 888a114dda6bea50b6c6-eac380526d6 [ 2.947382] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 2.951710] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 2.959701] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 2.962096] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ??debugfs initialized ??[ 4.472822] hid: raw HID events driver (C) Jiri Kosina [ 4.473880] usbcore: registered new interface driver usbhid [ 4.474044] usbhid: USB HID core driver [ 4.475419] tegra-dce d800000.dce: Adding to iommu group 6 [ 4.476868] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 4.477934] tegra234-aon c000000.aon: Adding to iommu group 7 [ 4.479058] c000000.aon:hsp: probed [ 4.479387] tegra234-aon c000000.aon: init done [ 4.479758] tegra23x-psc e860000.psc: Adding to iommu group 8 [ 4.480200] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 4.480369] tegra23x-psc e860000.psc: init done [ 4.480628] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 9 [ 4.481407] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.482358] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 4.482638] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [0]. Ignored... [ 4.482900] dce: dce_admin_send_cmd_ver:413 version : [0x2] err : [0x0] [ 4.483186] dce: dce_admin_setup_clients_ipc:542 Channel Reset Complete for Type [1] ... [ 4.483192] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [1]. Ignored... [ 4.487198] dce: dce_admin_setup_clients_ipc:518 Get queue info failed for [2] [ 4.503048] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [1]. Ignored... [ 4.503061] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 4.513364] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.520359] dce: dce_admin_setup_clients_ipc:542 Channel Reset Complete for Type [3] ... [ 4.520361] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [3]. Ignored... [ 4.529330] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.537689] dce: dce_start_boot_flow:100 DCE_BOOT_DONE [ 4.546354] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.573757] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.584446] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.596169] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.608584] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.620495] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (117) [ 4.626585] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.637007] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=7a10e4613e151d2bf1df37dd80d456800f5b94d0 [ 4.647662] t19x_cache tegra-cache: probed [ 4.649965] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 4.664637] optee: probing for conduit method. [ 4.664775] optee: revision 3.16 (65cc2218) [ 4.665472] optee: dynamic shared memory is enabled [ 4.669464] optee: initialized driver [ 4.684967] nvpmodel: initialized successfully [ 4.685177] tegra_hv: get_hvd: not initialized yet [ 4.685320] user_ivc_mempool: hypervisor not present [ 4.687956] usbcore: registered new interface driver snd-usb-audio [ 4.694104] u32 classifier [ 4.696317] input device check on [ 4.699989] Actions configured [ 4.703347] Initializing XFRM netlink socket [ 4.708036] NET: Registered protocol family 10 [ 4.713126] Segment Routing with IPv6 [ 4.715704] NET: Registered protocol family 17 [ 4.720051] NET: Registered protocol family 15 [ 4.724447] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.738409] Bluetooth: RFCOMM socket layer initialized [ 4.742755] Bluetooth: RFCOMM ver 1.11 [ 4.746641] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.752501] Bluetooth: HIDP socket layer initialized [ 4.758520] 9pnet: Installing 9P2000 support [ 4.761909] Key type dns_resolver registered [ 4.767032] registered taskstats version 1 [ 4.770359] Loading compiled-in X.509 certificates [ 4.778771] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.785434] tegra194-pcie 14100000.pcie: Adding to iommu group 10 [ 4.797019] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 4.798301] tegra194-pcie 14160000.pcie: Adding to iommu group 11 [ 4.809146] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 4.810478] tegra194-pcie 141a0000.pcie: Adding to iommu group 12 [ 4.821230] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 4.843768] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 13 [ 4.846449] host1x 13e40000.host1x: Adding to iommu group 14 [ 5.856780] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 5.868208] host1x 13e40000.host1x: initialized [ 5.868649] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 15 [ 5.869185] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 5.870805] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 16 [ 5.871327] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 5.872942] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 17 [ 5.873425] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 5.875014] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 18 [ 5.875506] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.877089] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 19 [ 5.877543] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.879099] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 20 [ 5.879551] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.890271] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 21 [ 5.896860] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.908295] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 22 [ 5.914896] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.926306] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 23 [ 5.932953] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 5.944352] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 24 [ 5.950920] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 5.962362] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 25 [ 5.968955] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 5.980417] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 26 [ 5.986962] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 5.998407] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 27 [ 6.004987] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 6.016434] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 28 [ 6.023023] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 6.034478] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 29 [ 6.041077] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 6.052494] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 30 [ 6.059057] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 6.070540] falcon 15340000.vic: Adding to iommu group 31 [ 6.079725] falcon 15340000.vic: initialized [ 6.080079] falcon 15380000.nvjpg: Adding to iommu group 32 [ 6.087624] falcon 15380000.nvjpg: initialized [ 6.089464] falcon 15540000.nvjpg1: Adding to iommu group 33 [ 6.098211] falcon 15540000.nvjpg1: initialized [ 6.099893] falcon 154c0000.nvenc: Adding to iommu group 34 [ 6.110662] falcon 154c0000.nvenc: initialized [ 6.110899] falcon 15a50000.ofa: Adding to iommu group 35 [ 6.119259] falcon 15a50000.ofa: initialized [ 6.120011] nvdec 15480000.nvdec: Adding to iommu group 36 [ 6.131032] nvdec 15480000.nvdec: initialized [ 6.131256] tsec 15500000.tsec: Adding to iommu group 37 [ 6.137431] random: crng init done [ 6.141021] tsec 15500000.tsec: initialized [ 6.144778] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.158260] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.166389] gpio-394 (camera-control-output-low): hogged as output/low [ 6.166590] gpio-397 (camera-control-output-low): hogged as output/low [ 6.169018] gpio-487 (camera-control-output-low): hogged as output/low [ 6.175395] gpio-486 (camera-control-output-low): hogged as output/low [ 6.182861] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.188696] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.194948] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.201119] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.206730] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.212422] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.219867] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 6.225960] tegra194-isp5 14800000.isp: Adding to iommu group 38 [ 6.234515] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.241259] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.247304] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 39 [ 6.255054] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 40 [ 6.262153] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 6.271371] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 6.277389] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 6.286790] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 6.292858] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.302648] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 6.308901] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 41 [ 6.317386] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 6.328222] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 42 [ 6.336806] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 6.347472] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 43 [ 6.355873] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 6.366711] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 44 [ 6.375132] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 6.385793] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 45 [ 6.394399] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 6.405044] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 46 [ 6.413599] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 6.424297] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 47 [ 6.432889] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 6.443552] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 48 [ 6.452137] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 6.462799] pva 16000000.pva0: Adding to iommu group 49 [ 6.487797] pva 16000000.pva0: initialized [ 6.495725] nvdla 15880000.nvdla0: Adding to iommu group 50 [ 6.504475] nvdla 15880000.nvdla0: initialized [ 6.506173] nvdla 158c0000.nvdla1: Adding to iommu group 51 [ 6.514917] nvdla 158c0000.nvdla1: initialized [ 6.516672] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 6.517719] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 6.518161] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.518332] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.518677] serial-tegra 3100000.serial: Adding to iommu group 3 [ 6.524918] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 6.534021] serial-tegra 3130000.serial: Adding to iommu group 3 [ 6.539633] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 65, base_baud = 0) is a TEGRA_UART [ 6.548725] tegra23x-qspi 3270000.spi: Node prod has invalid entries [ 6.554418] tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting [ 6.561763] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 6.569379] tegra23x-qspi 3270000.spi: Prod settings list not found [ 6.599639] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 6.599889] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.600060] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.601095] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 6.607557] tegra-xusb 3610000.xhci: irq 235, io mem 0x03610000 [ 6.613886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.621614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.628875] usb usb1: Product: xHCI Host Controller [ 6.633863] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.639985] usb usb1: SerialNumber: 3610000.xhci [ 6.645347] hub 1-0:1.0: USB hub found [ 6.648678] hub 1-0:1.0: 4 ports detected [ 6.652920] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.658108] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.665720] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.673169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.681296] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.688557] usb usb2: Product: xHCI Host Controller [ 6.693535] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.699749] usb usb2: SerialNumber: 3610000.xhci [ 6.704831] hub 2-0:1.0: USB hub found [ 6.708172] hub 2-0:1.0: 4 ports detected [ 6.743575] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [ 6.746694] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 6.749857] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz [ 6.751428] tegra194-cpufreq e000000.ccplex: probed with ICC [ 6.752729] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.758979] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 6.760202] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 6.768537] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 6.776935] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 6.785420] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 6.789788] mmc0: CQHCI version 5.10 [ 6.802766] irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1 [ 6.805067] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 6.826202] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.899286] tegra194-pcie 14100000.pcie: Link up [ 6.900322] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 6.900519] pci_bus 0001:00: root bus resource [bus 00-ff] [ 6.900677] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 6.900950] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 6.901260] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 6.901538] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 6.901885] pci 0001:00:00.0: PME# supported from D0 D3hot [ 6.906280] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 6.906601] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 6.906939] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 6.908196] pci 0001:01:00.0: supports D1 D2 [ 6.908309] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.912651] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 6.912846] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 6.918539] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 6.919452] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 6.926314] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 6.939205] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.944440] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 6.950713] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 6.957896] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 6.966261] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 6.974932] pcieport 0001:00:00.0: Adding to iommu group 10 [ 6.980631] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 6.986304] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 6.992669] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.999833] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 7.004793] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 7.013444] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 7.021928] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 7.033995] mmc0: Command Queue Engine enabled [ 7.034694] mmc0: periodic cache flush enabled [ 7.039164] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.045889] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 7.050291] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 7.066495] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 7.095384] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.095609] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.095799] usb 1-3: Product: Bluetooth Radio [ 7.095908] usb 1-3: Manufacturer: Realtek [ 7.096023] usb 1-3: SerialNumber: 00e04c000001 [ 7.220668] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.258126] usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcdDevice= 1.40 [ 7.258410] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.258645] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.258805] usb 2-3: Manufacturer: Generic [ 7.270346] hub 2-3:1.0: USB hub found [ 7.272673] hub 2-3:1.0: 4 ports detected [ 7.375425] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 7.543563] usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcdDevice= 1.40 [ 7.543815] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.544036] usb 1-4: Product: 4-Port USB 2.0 Hub [ 7.544184] usb 1-4: Manufacturer: Generic [ 7.545601] hub 1-4:1.0: USB hub found [ 7.547009] hub 1-4:1.0: 4 ports detected [ 8.139915] tegra194-pcie 14160000.pcie: Phy link never came up [ 8.140155] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 8.140367] pci_bus 0004:00: root bus resource [bus 00-ff] [ 8.140533] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 8.140827] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 8.141147] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 8.141431] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 8.141771] pci 0004:00:00.0: PME# supported from D0 D3hot [ 8.149265] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 8.149429] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 8.149911] pcieport 0004:00:00.0: Adding to iommu group 11 [ 8.150273] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 8.150676] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 8.151071] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 8.151313] pci 0004:00:00.0: Removing from iommu group 11 [ 8.151455] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 8.155897] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 8.160882] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 8.165513] avdd-cam-2v8: supplied by vdd-3v3-sys [ 8.170141] vdd-dp: supplied by vdd-3v3-sys [ 8.174407] vdd-3v3-sd: supplied by vdd-3v3-sys [ 8.179419] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 8.185634] tegra194-isp5 14800000.isp: initialized [ 8.191145] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 8.195248] (NULL device *): fops function table already registered [ 8.202397] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 8.208072] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 8.208263] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.229889] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 302 [ 8.271426] usb 1-4.1: new low-speed USB device number 4 using tegra-xusb [ 8.320318] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 8.320540] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 8.320786] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 8.321028] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 8.380094] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 8.380342] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.380557] usb 1-4.1: Product: USB Optical Mouse [ 8.380687] usb 1-4.1: Manufacturer: Logitech [ 8.386019] input: Logitech USB Optical Mouse as /devices/platform/3610000.xhci/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C077.0001/input/input0 [ 8.387203] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3610000.xhci-4.1/input0 [ 8.467421] usb 1-4.2: new low-speed USB device number 5 using tegra-xusb [ 8.577900] usb 1-4.2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=49.20 [ 8.578142] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.578354] usb 1-4.2: Product: USB Keyboard [ 8.578484] usb 1-4.2: Manufacturer: Logitech [ 8.588890] input: Logitech USB Keyboard as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2:1.0/0003:046D:C31C.0002/input/input1 [ 8.647769] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3610000.xhci-4.2/input0 [ 8.655595] input: Logitech USB Keyboard Consumer Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2:1.1/0003:046D:C31C.0003/input/input2 [ 8.715647] input: Logitech USB Keyboard System Control as /devices/platform/3610000.xhci/usb1/1-4/1-4.2/1-4.2:1.1/0003:046D:C31C.0003/input/input3 [ 8.716531] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3610000.xhci-4.2/input1 [ 9.279700] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 9.428174] tegra194-pcie 141a0000.pcie: Phy link never came up [ 9.428420] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 9.428627] pci_bus 0005:00: root bus resource [bus 00-ff] [ 9.428793] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 9.429085] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.429401] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 9.429689] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 9.430020] pci 0005:00:00.0: PME# supported from D0 D3hot [ 9.437503] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 9.437659] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.438119] pcieport 0005:00:00.0: Adding to iommu group 12 [ 9.438487] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 9.438890] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 9.439297] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 9.439526] pci 0005:00:00.0: Removing from iommu group 12 [ 9.439673] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 9.444249] nvethernet 6810000.ethernet: Adding to iommu group 52 [ 9.449311] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 9.457021] nvethernet 6810000.ethernet: failed to read MDIO address [ 9.463579] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 9.470417] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 9.863940] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:7d:d2:c4 [ 9.864479] nvethernet 6810000.ethernet: Macsec not enabled [ 9.864653] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 9.866769] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 9.867358] irq: IRQ304: trimming hierarchy from :pmc@c360000 [ 9.867584] irq: IRQ305: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.867855] irq: IRQ306: trimming hierarchy from :pmc@c360000 [ 9.868056] input: gpio-keys as /devices/platform/gpio-keys/input/input4 [ 9.868887] tegra-se-nvhost 15810000.se: Adding to iommu group 53 [ 9.869353] tegra-se-nvhost 15810000.se: initialized [ 9.879895] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 9.880158] tegra-se-nvhost 15820000.se: Addi??WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk ??ng to iommu group 54 [ 9.880576] tegra-se-nvhost 15820000.se: initialized [ 9.883235] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 9.883491] tegra-se-nvhost 15840000.se: Adding to iommu group 55 [ 9.883890] tegra-se-nvhost 15840000.se: initialized [ 9.886674] ??WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk ??tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 9.887372] tegra_actmon d230000.actmon: in actmon_register()... [ 9.887671] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 9.890390] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 9.898229] hvc_sysfs: hypervi??WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ??sor is not present [ 10.034324] ALSA device list: [ 10.034429] No soundcards found. [ 10.035086] Freeing unused kernel memory: 3968K [ 10.035307] Run /init as init process [ 10.047381] Root device found: mmcblk0p1 [ 10.047976] Found dev node: /dev/mmcblk0p1 [ 10.109811] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 10.110874] Rootfs mounted over mmcblk0p1 [ 10.125691] Switching from initrd to actual rootfs [ 10.253717] systemd[1]: System time before build time, advancing clock. [ 10.302445] systemd[1]: systemd 245.4-4ubuntu3.18 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.303589] systemd[1]: Detected architecture arm64. [ 10.337984] systemd[1]: Set hostname to . [ 10.565215] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 10.565607] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 10.566766] systemd[1]: Created slice system-modprobe.slice. [ 10.567428] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 10.567967] systemd[1]: Created slice User and Session Slice. [ 10.568243] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.568722] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.569089] systemd[1]: Reached target User and Group Name Lookups. [ 10.569328] systemd[1]: Reached target Slices. [ 10.569501] systemd[1]: Reached target Swap. [ 10.569890] systemd[1]: Listening on RPCbind Server Activation Socket. [ 10.570219] systemd[1]: Listening on Syslog Socket. [ 10.571660] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.571929] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.572328] systemd[1]: Listening on Journal Audit Socket. [ 10.574841] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.580905] systemd[1]: Listening on Journal Socket. [ 10.585960] systemd[1]: Listening on udev Control Socket. [ 10.591438] systemd[1]: Listening on udev Kernel Socket. [ 10.597890] systemd[1]: Mounting Huge Pages File System... [ 10.603429] systemd[1]: Mounting POSIX Message Queue File System... [ 10.609590] systemd[1]: Mounting RPC Pipe File System... [ 10.615015] systemd[1]: Mounting Kernel Debug File System... [ 10.620731] systemd[1]: Mounting Kernel Trace File System... [ 10.626673] systemd[1]: Starting Journal Service... [ 10.638067] systemd[1]: Starting Set the console keyboard layout... [ 10.639341] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 10.646271] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 10.652718] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 10.661098] systemd[1]: Starting Load Kernel Module efi_pstore... [ 10.667306] systemd[1]: Starting Load Kernel Module pstore_blk... [ 10.673538] systemd[1]: Starting Load Kernel Module pstore_zone... [ 10.679832] systemd[1]: Starting Load Kernel Module ramoops... [ 10.685807] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 10.692118] pstore: Using crash dump compression: deflate [ 10.692740] systemd[1]: Started Nameserver information manager. [ 10.704155] printk: console [ramoops-1] enabled [ 10.707779] pstore: Registered ramoops as persistent store backend [ 10.713929] ramoops: using 0x200000@0x82c200000, ecc: 0 [ 10.719362] systemd[1]: Reached target Network (Pre). [ 10.731320] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.733293] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.745508] systemd[1]: Starting Load Kernel Modules... [ 10.748492] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.755003] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 10.755152] systemd[1]: Starting udev Coldplug all Devices... [ 10.766074] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 10.766787] systemd[1]: Started Journal Service. [ 10.771735] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x000000082f000000,16777216 [ 10.785501] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 10.785509] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 10.802823] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 10.802827] nvmap_page_pool_init: Total RAM pages: 7817180 [ 10.816392] nvmap_page_pool_init: nvmap page pool size: 977147 pages (3816 MB) [ 10.816442] nvmap_background_zero_thread: PP zeroing thread starting. [ 10.816525] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 10.819524] misc nvmap: created heap fsi base 0x000000082f000000 size (16384KiB) [ 10.869701] systemd-journald[312]: Received client request to flush runtime journal. [ 10.877606] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.877606] [ 11.222650] nvidia: loading out-of-tree module taints kernel. [ 11.373290] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.373500] Creating 1 MTD partitions on "spi6.0": [ 11.373656] 0x000000000000-0x000004000000 : "Whole_flash0" [ 11.460117] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0 [ 11.460596] gpio gpiochip0: (tegra234-gpio): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 11.460958] gpio gpiochip0: (tegra234-gpio): unable to lock HW IRQ 126 for IRQ [ 11.461197] genirq: Failed to request resources for 1-0008 (irq 310) on irqchip gpio [ 11.461454] ucsi_ccg 1-0008: request_threaded_irq failed - -5 [ 11.465320] ucsi_ccg: probe of 1-0008 failed with error -5 [ 12.208451] using random self ethernet address [ 12.208596] using random host ethernet address [ 12.496710] using random self ethernet address [ 12.496865] using random host ethernet address [ 15.548928] Bridge firewalling registered [ 19.731280] audit: type=1326 audit(1673940098.580:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2358 comm="cupsd" exe="/snap/cups/873/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff82861ee8 code=0x50000 [ 20.359944] audit: type=1326 audit(1673940099.212:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2358 comm="cupsd" exe="/snap/cups/873/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff82861ee8 code=0x50000 [ 20.385363] audit: type=1326 audit(1673940099.236:4): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2383 comm="cups-browsed" exe="/snap/cups/873/sbin/cups-browsed" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffffb39f28c4 code=0x50000 Ubuntu 20.04.5 LTS tpl ttyTCU0 tpl login: