[ 104.438025] tegradc tegradc.1: blank - powerdown [ 104.500233] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 104.500239] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 104.500244] dp lt: state 0 (Reset), pending_lt_evt 0 [ 104.500248] dp lt: link training force disable [ 104.500252] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 105.661928] watchdog: watchdog0: watchdog did not stop! [ 105.697859] systemd-shutdown[1]: Syncing filesystems and block devices. [ 105.746611] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 105.771382] systemd-journald[2024]: Received SIGTERM from PID 1 (systemd-shutdow). [ 105.835202] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 105.852676] systemd-shutdown[1]: Using hardware watchdog 'Software Watchdog', version 0, device /dev/watchdog [ 105.864950] systemd-shutdown[1]: Unmounting file systems. [ 105.873156] [5564]: Remounting '/pldata' read-only in with options 'data=ordered'. [ 105.895630] EXT4-fs (mmcblk0p13): re-mounted. Opts: data=ordered [ 105.905250] [5565]: Unmounting '/pldata'. [ 105.932914] [5566]: Remounting '/' read-only in with options 'data=ordered'. [ 105.979008] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered [ 105.996589] systemd-shutdown[1]: All filesystems unmounted. [ 106.002372] systemd-shutdown[1]: Deactivating swaps. [ 106.007568] systemd-shutdown[1]: All swaps deactivated. [ 106.012828] systemd-shutdown[1]: Detaching loop devices. [ 106.022830] systemd-shutdown[1]: All loop devices detached. [ 106.028594] systemd-shutdown[1]: Stopping MD devices. [ 106.034534] systemd-shutdown[1]: All MD devices stopped. [ 106.039872] systemd-shutdown[1]: Detaching DM devices. [ 106.045781] systemd-shutdown[1]: All DM devices detached. [ 106.051358] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached. [ 106.087402] systemd-shutdown[1]: Syncing filesystems and block devices. [ 106.094520] systemd-shutdown[1]: Rebooting. [ 106.126699] lan743x 0000:01:00.0 eth0: ptp clock unregister [ 106.133992] therm-fan-est: shutting down [ 106.138784] nvgpu: 57000000.gpu gk20a_pm_shutdown:969 [INFO] shutting down [ 106.147264] nvgpu: 57000000.gpu gk20a_pm_shutdown:1000 [INFO] shut down complete [ 106.156272] tegra-xusb 70090000.xusb: exiting ELPG [ 106.164981] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 106.174849] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [ 106.181581] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [ 106.188311] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [ 106.195580] tegra-xusb 70090000.xusb: exiting ELPG done [ 106.201443] late_shutdown started [ 106.204866] tegra-i2c 7000d100.i2c: Bus is shutdown down.. [ 106.210365] tegra-i2c 7000d000.i2c: Bus is shutdown down.. [ 106.215863] tegra-i2c 7000c700.i2c: Bus is shutdown down.. [ 106.221360] tegra-i2c 7000c500.i2c: Bus is shutdown down.. [ 106.226856] tegra-i2c 7000c400.i2c: Bus is shutdown down.. [ 106.232355] tegra-i2c 7000c000.i2c: Bus is shutdown down.. [ 106.237859] tegra-vii2c 546c0000.i2c: Bus is shutdown down.. [ 106.243608] reboot: Restarting system [0000.202] [L4T TegraBoot] (version 00.00.2018.01-l4t-e82258de) [0000.208] Processing in cold boot mode Bootloader 2 [0000.212] A02 Bootrom Patch rev = 1023 [0000.216] Power-up reason: software reset [0000.219] No Battery Present [0000.222] pmic max77620 reset reason [0000.225] pmic max77620 NVERC : 0x0 [0000.229] RamCode = 0 [0000.231] Platform has DDR4 type RAM [0000.234] max77620 disabling SD1 Remote Sense [0000.239] Setting DDR voltage to 1125mv [0000.243] Serial Number of Pmic Max77663: 0x1103ac [0000.250] Entering ramdump check [0000.253] Get RamDumpCarveOut = 0x0 [0000.257] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8 [0000.262] Last reboot was clean, booting normally! [0000.266] Sdram initialization is successful [0000.270] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000 [0000.277] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000 [0000.282] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000 [0000.288] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000 [0000.294] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000 [0000.300] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000 [0000.306] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000 [0000.311] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000 [0000.328] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000 [0000.334] Platform-DebugCarveout: 0 [0000.337] Nck Carveout Base=0x00000000ff080000 Size=0x00200000 [0000.343] Non secure mode, and RB not enabled. [0000.359] Csd NumOfBlocks=0 [0000.557] *** Booting BFS0. [0000.560] Read PT from (0:3) [0000.566] Using BFS PT to query partitions [0000.570] PT: Partition LNX NOT found ! [0001.167] *** Booting KFS0. [0001.170] BoardID = 3448, SKU = 0x2 [0001.173] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.179] Read GPT from (0:3) [0001.186] Using GPT Primary to query partitions [0001.191] Loading Tboot-CPU binary [0001.198] Verifying TBC in OdmNonSecureSBK mode [0001.208] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0001.215] Bootloader downloaded successfully. [0001.219] Downloaded Tboot-CPU binary to 0xa0000258 [0001.224] MAX77620_GPIO5 configured [0001.227] CPU power rail is up [0001.230] CPU clock enabled [0001.234] Performing RAM repair [0001.237] Updating A64 Warmreset Address to 0xa00002e9 [0001.242] BoardID = 3448, SKU = 0x2 [0001.245] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.251] Loading NvTbootBootloaderDTB [0001.268] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode [0001.344] Bootloader DTB Load Address: 0x83000000 [0001.349] BoardID = 3448, SKU = 0x2 [0001.352] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.358] Loading NvTbootKernelDTB [0001.374] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode [0001.450] Kernel DTB Load Address: 0x83100000 [0001.454] BoardID = 3448, SKU = 0x2 [0001.457] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.465] Loading cboot binary [0001.476] Verifying EBT in OdmNonSecureSBK mode [0001.518] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0001.525] Bootloader downloaded successfully. [0001.529] BoardID = 3448, SKU = 0x2 [0001.532] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.538] PT: Partition NCT NOT found ! [0001.542] Warning: Find Partition via PT Failed [0001.546] Next binary entry address: 0x92c00258 [0001.551] BoardId: 3448 [0001.555] Overriding pmu board id with proc board id [0001.560] Display board id is not available [0001.564] BoardID = 3448, SKU = 0x2 [0001.568] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.581] Verifying SC7EntryFw in OdmNonSecureSBK mode [0001.639] /bpmp deleted [0001.641] SC7EntryFw header found loaded at 0xff700000 [0001.834] OVR2 PMIC [0001.836] Bpmp FW successfully loaded [0001.840] BoardID = 3448, SKU = 0x2 [0001.843] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.850] WB0 init successfully at 0xff780000 [0001.854] Set NvDecSticky Bits [0001.858] GSC2 address ff53fffc value c0edbbcc [0001.864] GSC MC Settings done [0001.867] BoardID = 3448, SKU = 0x2 [0001.870] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.877] TOS Image length 53680 [0001.880] Monitor size 53680 [0001.883] OS size 0 [0001.888] Secure Os AES-CMAC Verification Success! [0001.892] TOS image cipher info: plaintext [0001.896] Loading and Validation of Secure OS Successful [0001.912] SC7 Entry Firmware - 0xff700000, 0x4000 [0001.917] NvTbootPackSdramParams: start. [0001.922] NvTbootPackSdramParams: done. [0001.926] Tegraboot started after 131098 us [0001.930] Basic modules init took 1481086 us [0001.934] Sec Bootdevice Read Time = 559 ms, Read Size = 14643 KB [0001.940] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB [0001.945] Next stage binary read took 7378 us [0001.949] Carveout took -28680 us [0001.953] CPU initialization took 381456 us [0001.957] Total time taken by TegraBoot 1841240 us [0001.961] Starting CPU & Halting co-processor 64NOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:37:40, Feb 19 2021 ERROR: Error initializing runtime service trusty_fast [0002.084] RamCode = 0 [0002.088] LPDDR4 Training: Read DT: Number of tables = 2 [0002.093] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0002.106] EMC Training Successful [0002.109] 408000 not found in DVFS table [0002.116] RamCode = 0 [0002.119] DT Write: emc-table@204000 succeeded [0002.124] DT Write: emc-table@1600000 succeeded [0002.129] LPDDR4 Training: Write DT: Number of tables = 2 [0002.189] [0002.190] Debug Init done [0002.192] Marked DTB cacheable [0002.195] Bootloader DTB loaded at 0x83000000 [0002.200] Marked DTB cacheable [0002.203] Kernel DTB loaded at 0x83100000 [0002.207] DeviceTree Init done [0002.212] Error while getting property value for pinctrl: pinctrl-1! [0002.219] gicd_base: 0x50041000 [0002.223] gicc_base: 0x50042000 [0002.226] Interrupts Init done [0002.230] Using base:0x60005090 & irq:208 for tick-timer [0002.235] Using base:0x60005098 for delay-timer [0002.240] platform_init_timer: DONE [0002.243] Timer(tick) Init done [0002.247] osc freq = 38400 khz [0002.251] [0002.252] Welcome to L4T Cboot [0002.255] [0002.256] Cboot Version: 00.00.2018.01-t210-39562017 [0002.261] calling constructors [0002.264] initializing heap [0002.266] initializing threads [0002.269] initializing timers [0002.272] creating bootstrap completion thread [0002.277] top of bootstrap2() [0002.280] CPU: ARM Cortex A57 [0002.282] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0002.287] initializing platform [0002.341] Config for emmc ddr50 mode completed [0002.345] sdmmc bdev is already initialized [0002.349] Enable APE clock [0002.352] Un-powergate APE partition [0002.355] of_register: registering tegra_udc to of_hal [0002.361] of_register: registering inv20628-driver to of_hal [0002.366] of_register: registering ads1015-driver to of_hal [0002.372] of_register: registering lp8557-bl-driver to of_hal [0002.377] of_register: registering bq2419x_charger to of_hal [0002.383] of_register: registering bq27441_fuel_gauge to of_hal [0002.395] gpio framework initialized [0002.398] of_register: registering tca9539_gpio to of_hal [0002.403] of_register: registering tca9539_gpio to of_hal [0002.409] of_register: registering i2c_bus_driver to of_hal [0002.414] of_register: registering i2c_bus_driver to of_hal [0002.420] of_register: registering i2c_bus_driver to of_hal [0002.425] pmic framework initialized [0002.429] of_register: registering max77620_pmic to of_hal [0002.434] regulator framework initialized [0002.438] of_register: registering tps65132_bl_driver to of_hal [0002.444] initializing target [0002.450] gpio_driver_register: register 'tegra_gpio_driver' driver [0002.457] tegra_init_gpio_from_dtb: gpio-init-0 node is not default! [0002.464] tegra_init_gpio_from_dtb: failed to initialize GPIO tables! [0002.473] fixed regulator driver initialized [0002.490] initializing OF layer [0002.493] NCK carveout not present [0002.497] Skipping dts_overrides [0002.501] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.518] I2C Bus Init done [0002.520] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.531] I2C Bus Init done [0002.533] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.544] I2C Bus Init done [0002.546] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.557] I2C Bus Init done [0002.559] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.570] I2C Bus Init done [0002.572] of_children_init: Ops found for compatible string maxim,max77620 [0002.583] max77620_init using irq 118 [0002.588] register 'maxim,max77620' pmic [0002.592] gpio_driver_register: register 'max77620-gpio' driver [0002.598] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.609] I2C Bus Init done [0002.612] NCK carveout not present [0002.622] Find /i2c@7000c000's alias i2c0 [0002.626] get eeprom at 1-a0, size 256, type 0 [0002.635] Find /i2c@7000c500's alias i2c2 [0002.638] get eeprom at 3-a0, size 256, type 0 [0002.643] get eeprom at 3-ae, size 256, type 0 [0002.647] pm_ids_update: Updating 1,a0, size 256, type 0 [0002.652] I2C slave not started [0002.655] I2C write failed [0002.658] Writing offset failed [0002.661] eeprom_init: EEPROM read failed [0002.665] pm_ids_update: eeprom init failed [0002.669] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.699] pm_ids_update: The pm board id is 3448-0002-401 [0002.706] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0002.715] pm_ids_update: pm id update successful [0002.719] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.725] I2C slave not started [0002.728] I2C write failed [0002.730] Writing offset failed [0002.733] eeprom_init: EEPROM read failed [0002.737] pm_ids_update: eeprom init failed [0002.767] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0002.773] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0002.781] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0002.787] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0002.795] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:55:27:b9 [0002.801] Plugin Manager: Parse ODM data 0x000a4000 [0002.814] shim_cmdline_install: /chosen/bootargs: console=ttyS0,115200 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0002.833] Find /i2c@7000c000's alias i2c0 [0002.837] get eeprom at 1-a0, size 256, type 0 [0002.846] Find /i2c@7000c500's alias i2c2 [0002.850] get eeprom at 3-a0, size 256, type 0 [0002.854] get eeprom at 3-ae, size 256, type 0 [0002.859] pm_ids_update: Updating 1,a0, size 256, type 0 [0002.864] I2C slave not started [0002.867] I2C write failed [0002.870] Writing offset failed [0002.873] eeprom_init: EEPROM read failed [0002.877] pm_ids_update: eeprom init failed [0002.881] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.911] pm_ids_update: The pm board id is 3448-0002-401 [0002.917] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0002.924] pm_ids_update: pm id update successful [0002.929] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.934] I2C slave not started [0002.937] I2C write failed [0002.940] Writing offset failed [0002.943] eeprom_init: EEPROM read failed [0002.946] pm_ids_update: eeprom init failed [0002.976] Add serial number:1422721086026 as DT property [0002.984] Applying platform configs [0002.991] platform-init is not present. Skipping [0002.995] calling apps_init() [0003.017] Found 13 GPT partitions in "sdmmc3_user" [0003.021] Proceeding to Cold Boot [0003.024] starting app android_boot_app [0003.028] Device state: unlocked [0003.031] display console init [0003.037] status of hdmi-display is not okay [0003.041] sor0 is not supported [0003.044] display_console_init: no valid display out_type [0003.052] subnode volume_up is not found ! [0003.056] subnode back is not found ! [0003.060] subnode volume_down is not found ! [0003.064] subnode menu is not found ! [0003.067] Gpio keyboard init success [0003.076] DT entry for leds-pwm not found [0003.121] found decompressor handler: lz4-legacy [0003.136] decompressing blob (type 1)... [0003.202] display_resolution: No display init [0003.206] Failed to retrieve display resolution [0003.211] Could not load/initialize BMP blob...ignoring [0003.260] decompressor handler not found [0003.264] load_firmware_blob: Firmware blob loaded, entries=2 [0003.270] XUSB blob version 0 size 124416 @ 0x92cb328c [0003.276] -------> se_aes_verify_sbk_clear: 747 [0003.280] se_aes_verify_sbk_clear: Error [0003.284] SE operation failed [0003.287] bl_battery_charging: connected to external power supply [0003.296] display_console_ioctl: No display init [0003.301] switch_backlight failed [0003.310] device_query_partition_size: failed to open partition sdmmc3_user:MSC ! [0003.318] MSC Partition not found [0003.327] device_query_partition_size: failed to open partition sdmmc3_user:USP ! [0003.335] USP partition read failed! [0003.338] blob_init: blob-partition USP header read failed [0003.344] android_boot Unable to update recovery partition [0003.349] kfs_getpartname: name = LNX [0003.353] Loading kernel from LNX [0003.444] load kernel from storage [0003.454] decompressor handler not found [0003.488] Successfully loaded kernel and ramdisk images [0003.493] board ID = D78, board SKU = 2 [0003.498] display_resolution: No display init [0003.502] Failed to retrieve display resolution [0003.507] bmp blob is not loaded and initialized [0003.511] Failed to display boot-logo [0003.515] NCK carveout not present [0003.518] Skipping dts_overrides [0003.521] NCK carveout not present [0003.531] Find /i2c@7000c000's alias i2c0 [0003.535] get eeprom at 1-a0, size 256, type 0 [0003.544] Find /i2c@7000c500's alias i2c2 [0003.548] get eeprom at 3-a0, size 256, type 0 [0003.552] get eeprom at 3-ae, size 256, type 0 [0003.557] pm_ids_update: Updating 1,a0, size 256, type 0 [0003.562] I2C slave not started [0003.565] I2C write failed [0003.568] Writing offset failed [0003.571] eeprom_init: EEPROM read failed [0003.575] pm_ids_update: eeprom init failed [0003.579] pm_ids_update: Updating 3,a0, size 256, type 0 [0003.609] pm_ids_update: The pm board id is 3448-0002-401 [0003.616] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0003.624] pm_ids_update: pm id update successful [0003.629] pm_ids_update: Updating 3,ae, size 256, type 0 [0003.634] I2C slave not started [0003.637] I2C write failed [0003.640] Writing offset failed [0003.643] eeprom_init: EEPROM read failed [0003.647] pm_ids_update: eeprom init failed [0003.676] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0003.682] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0003.690] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0003.696] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0003.704] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:55:27:b9 [0003.711] Plugin Manager: Parse ODM data 0x000a4000 [0003.723] shim_cmdline_install: /chosen/bootargs: console=ttyS0,115200 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0003.736] Add serial number:1422721086026 as DT property [0003.746] "bpmp" doesn't exist, creating [0003.751] Updated bpmp info to DTB [0003.756] Updated initrd info to DTB [0003.760] "proc-board" doesn't exist, creating [0003.766] Updated board info to DTB [0003.769] "pmu-board" doesn't exist, creating [0003.775] Updated board info to DTB [0003.779] "display-board" doesn't exist, creating [0003.785] Updated board info to DTB [0003.788] "reset" doesn't exist, creating [0003.793] Updated reset info to DTB [0003.796] display_console_ioctl: No display init [0003.800] display_console_ioctl: No display init [0003.805] display_console_ioctl: No display init [0003.810] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_ uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt [0003.844] DTB cmdline: console=ttyS0,115200 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0003.855] Updated bootarg info to DTB [0003.859] Adding uuid 00000001643073000400000019fd0280 to DT [0003.865] Adding eks info 0 to DT [0003.871] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7 [0003.877] Updated memory info to DTB [0003.884] set vdd_core voltage to 1075 mv [0003.888] setting 'vdd-core' regulator to 1075000 micro volts [0003.894] Found secure-pmc; disable BPMP U-Boot 2021.01 (Jun 09 2021 - 18:11:03 +0000) SoC: tegra210 Model: NVIDIA Jetson Nano Developer Kit Board: NVIDIA P3450-0002 DRAM: 4 GiB MMC: sdhci@700b0000: 1, sdhci@700b0600: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:2... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 286 bytes read in 18 ms (14.6 KiB/s) 1: Primary Linux Kernel Retrieving file: /boot/extlinux/../Image 37521416 bytes read in 852 ms (42 MiB/s) append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsp ort,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt console=ttyS0,115200 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_ part_access=1 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 fbcon=map:1 fbcon=rotate:2 Retrieving file: /boot/extlinux/../tegra210-p3448-0002-hivebp1v0-b00.dtb 242910 bytes read in 31 ms (7.5 MiB/s) Moving Image from 0x84000000 to 0x84080000, end=864e7000 ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000083000000, end 000000008303e4dd copying carveout for /host1x@50000000/dc@54200000... copying carveout for /host1x@50000000/dc@54240000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-l4t-r32.5-g8f97b4ec4c5b-dirty (default@ubuntu-20) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1) ) #15 SMP PREEMPT Wed Apr 20 15:24:26 MDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0 ,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt console=ttyS0,115200 console=tty0 fbcon=map:0 net.if names=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 fbcon=map:1 fbcon=rotate:2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29632(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3572480K/4159488K available (15230K kernel code, 2914K rwdata, 9888K rodata, 8576K init, 607K bss, 111872K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff8009910000 ( 9920 KB) [ 0.000000] .init : 0xffffff8009910000 - 0xffffff800a170000 ( 8576 KB) [ 0.000000] .data : 0xffffff800a170000 - 0xffffff800a448808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a448808 - 0xffffff800a4e07ac ( 608 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001708] Console: colour dummy device 80x25 [ 0.002601] console [tty0] enabled [ 0.002628] kmemleak: Kernel memory leak detector disabled [ 0.002659] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002694] pid_max: default: 32768 minimum: 301 [ 0.003152] Security Framework initialized [ 0.003386] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003407] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004615] ftrace: allocating 47888 entries in 188 pages [ 0.178963] ASID allocator initialised with 65536 entries [ 0.215825] tegra-id: chipid=22117. [ 0.215865] tegra-id: opt_subrevision=0. [ 0.215895] Tegra Speedo/IDDQ fuse revision 4 [ 0.215912] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.215929] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.215946] Tegra: CPU Speedo Value 2051, SoC Speedo Value 1960, GPU Speedo Value 2058 [ 0.215970] Tegra: CPU IDDQ Value 1832, SoC IDDQ Value 2044, GPU IDDQ Value 2500 [ 0.216007] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.216031] DTS File Name: /home/default/p/linux-tegra-4.9/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-hivebp1v0-b00.dts [ 0.216069] DTB Build time: Apr 20 2022 18:19:25 [ 0.265061] CPU1: Booted secondary processor [411fd071] [ 0.296959] CPU2: Booted secondary processor [411fd071] [ 0.328944] CPU3: Booted secondary processor [411fd071] [ 0.329039] Brought up 4 CPUs [ 0.329103] SMP: Total of 4 processors activated. [ 0.329123] CPU features: detected feature: 32-bit EL0 Support [ 0.329396] CPU: All CPU(s) started at EL2 [ 0.329426] alternatives: patching kernel code [ 0.337582] devtmpfs: initialized [ 0.376486] Initilizing CustomIPI irq domain [ 0.376902] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.376958] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.387500] pinctrl core: initialized pinctrl subsystem [ 0.388576] regulator-dummy: no parameters [ 0.388867] Initializing plugin-manager [ 0.389036] Plugin module not found [ 0.389242] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389261] Error in parsing node /plugin-manager/fragement@0: -22 [ 0.389399] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389414] Error in parsing node /plugin-manager/fragment@1: -22 [ 0.389553] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389567] Error in parsing node /plugin-manager/fragment@2: -22 [ 0.389705] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389720] Error in parsing node /plugin-manager/fragment@3: -22 [ 0.389858] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389872] Error in parsing node /plugin-manager/fragment@4: -22 [ 0.390011] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390026] Error in parsing node /plugin-manager/fragment@5: -22 [ 0.390162] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390177] Error in parsing node /plugin-manager/fragement@6: -22 [ 0.390313] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390328] Error in parsing node /plugin-manager/fragement@7: -22 [ 0.390465] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390479] Error in parsing node /plugin-manager/fragement@8: -22 [ 0.390637] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390652] Error in parsing node /plugin-manager/fragement@9: -22 [ 0.390822] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390836] Error in parsing node /plugin-manager/fragement@10: -22 [ 0.390973] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390987] Error in parsing node /plugin-manager/fragment@12: -22 [ 0.391128] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391144] Error in parsing node /plugin-manager/fragement@13: -22 [ 0.391295] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391310] Error in parsing node /plugin-manager/fragment-e2614-common@0: -22 [ 0.391455] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391470] Error in parsing node /plugin-manager/fragment-e2614-a00@1: -22 [ 0.391609] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391624] Error in parsing node /plugin-manager/fragment-e2614-b00@2: -22 [ 0.391760] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391775] Error in parsing node /plugin-manager/fragment-e2614-pins@3: -22 [ 0.394798] NET: Registered protocol family 16 [ 0.396496] pstore: using zlib compression [ 0.397138] console [pstore-1] enabled [ 0.397157] pstore: Registered ramoops as persistent store backend [ 0.397177] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.413079] cpuidle: using governor menu [ 0.416382] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.418246] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff800a174000) [ 0.418298] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.421472] atomic_pool_init():621: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.423934] Serial: AMBA PL011 UART driver [ 0.424449] tegra_powergate_init: DONE [ 0.424484] DTS File Name: /home/default/p/linux-tegra-4.9/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-hivebp1v0-b00.dts [ 0.424524] DTB Build time: Apr 20 2022 18:19:25 [ 0.426562] Tegra reboot handler registered. [ 0.431128] iommu: Adding device tegra-carveouts to group 0 [ 0.431297] platform tegra-carveouts: domain=ffffffc0f9be23d8 allocates as[0]=ffffffc0f94580a8 [ 0.431679] iommu: Adding device smmu_test to group 1 [ 0.431743] platform smmu_test: domain=ffffffc0f9be2618 allocates as[0]=ffffffc0f9458110 [ 0.432553] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.432627] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.432709] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.432734] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.432768] mc-err: mcerr ops are set to t21x [ 0.441913] iommu: Adding device 70090000.xusb to group 2 [ 0.442216] iommu: Adding device 70006000.serial to group 3 [ 0.442303] platform 70006000.serial: domain=ffffffc0f9b70618 allocates as[0]=ffffffc0f9458178 [ 0.442742] iommu: Adding device 70006040.serial to group 4 [ 0.443017] iommu: Adding device 70006200.serial to group 5 [ 0.443259] iommu: Adding device sound to group 6 [ 0.443325] platform sound: domain=ffffffc0f9b70b58 allocates as[0]=ffffffc0f94581e0 [ 0.443897] iommu: Adding device 7000d400.spi to group 7 [ 0.444197] iommu: Adding device 70410000.spi to group 8 [ 0.444521] iommu: Adding device 50000000.host1x to group 9 [ 0.444802] iommu: Adding device 54080000.vi to group 10 [ 0.445277] iommu: Adding device 54600000.isp to group 11 [ 0.445551] iommu: Adding device 54680000.isp to group 12 [ 0.445845] iommu: Adding device tegradc.1 to group 13 [ 0.445932] platform tegradc.1: domain=ffffffc0f94c8918 allocates as[0]=ffffffc0f9458248 [ 0.446477] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.446728] iommu: Adding device 54340000.vic to group 14 [ 0.446960] iommu: Adding device 544c0000.nvenc to group 15 [ 0.447171] iommu: Adding device 54500000.tsec to group 16 [ 0.447381] iommu: Adding device 54100000.tsecb to group 17 [ 0.447598] iommu: Adding device 54480000.nvdec to group 18 [ 0.447807] iommu: Adding device 54380000.nvjpg to group 19 [ 0.448863] iommu: Adding device 546c0000.i2c to group 20 [ 0.449266] iommu: Adding device 57000000.gpu to group 21 [ 0.449361] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[0]=ffffffc0f94582b0 [ 0.449419] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[1]=ffffffc0f9458318 [ 0.449477] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[2]=ffffffc0f9458380 [ 0.449534] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[3]=ffffffc0f94583e8 [ 0.450412] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.450455] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.450481] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.450502] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.450519] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.501149] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.501188] tegra-pmc: Clear bootloader IO dpd settings [ 0.501224] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.501305] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.501598] iommu: Adding device 70012000.se to group 22 [ 0.502360] iommu: Adding device 7000c000.i2c to group 23 [ 0.502630] iommu: Adding device 7000c400.i2c to group 24 [ 0.502895] iommu: Adding device 7000c500.i2c to group 25 [ 0.503150] iommu: Adding device 7000c700.i2c to group 26 [ 0.503411] iommu: Adding device 7000d000.i2c to group 27 [ 0.503675] iommu: Adding device 7000d100.i2c to group 28 [ 0.503952] iommu: Adding device sdhci-tegra.3 to group 29 [ 0.504048] platform sdhci-tegra.3: domain=ffffffc0f954ea98 allocates as[0]=ffffffc0f9458450 [ 0.504499] iommu: Adding device sdhci-tegra.2 to group 30 [ 0.504573] platform sdhci-tegra.2: domain=ffffffc0f954ecd8 allocates as[0]=ffffffc0f94584b8 [ 0.505441] iommu: Adding device 700d0000.xudc to group 31 [ 0.508612] vdd-ac-bat: 5000 mV [ 0.509005] vdd-5v0-sys: 5000 mV [ 0.509953] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.510043] vdd-5v0-hdmi: 5000 mV [ 0.510451] vdd-1v8-sys: 1800 mV [ 0.510851] vdd-fan: supplied by vdd-5v0-sys [ 0.510905] vdd-fan: 5000 mV [ 0.511300] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.511375] vdd-usb-vbus: 5000 mV [ 0.511936] vdd-usb-vbus2: 5000 mV [ 0.549999] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552473] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.552526] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.552579] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.552618] GPIO line 12 (default_input) hogged as input [ 0.552648] GPIO line 13 (default_input) hogged as input [ 0.552678] GPIO line 14 (default_input) hogged as input [ 0.552708] GPIO line 15 (default_input) hogged as input [ 0.552739] GPIO line 232 (default_input) hogged as input [ 0.552770] GPIO line 34 (default_input) hogged as input [ 0.552801] GPIO line 35 (default_input) hogged as input [ 0.552834] GPIO line 38 (default_input) hogged as input [ 0.552864] GPIO line 147 (default_input) hogged as input [ 0.552896] GPIO line 149 (default_input) hogged as input [ 0.552925] GPIO line 5 (default_input) hogged as input [ 0.553007] GPIO line 188 (default_input) hogged as input [ 0.553043] GPIO line 189 (default_input) hogged as input [ 0.553076] GPIO line 190 (default_input) hogged as input [ 0.553110] GPIO line 193 (default_input) hogged as input [ 0.553148] GPIO line 200 (default_input) hogged as input [ 0.553183] GPIO line 202 (default_input) hogged as input [ 0.553216] GPIO line 77 (default_input) hogged as input [ 0.553247] GPIO line 78 (default_input) hogged as input [ 0.553277] GPIO line 76 (default_input) hogged as input [ 0.553309] GPIO line 50 (default_input) hogged as input [ 0.553340] GPIO line 51 (default_input) hogged as input [ 0.553376] GPIO line 20 (default_input) hogged as input [ 0.553409] GPIO line 58 (default_input) hogged as input [ 0.553441] GPIO line 61 (default_input) hogged as input [ 0.553474] GPIO line 62 (default_input) hogged as input [ 0.553506] GPIO line 228 (default_input) hogged as input [ 0.553543] GPIO line 216 (default_output_low) hogged as output/low [ 0.553574] GPIO line 32 (default_output_low) hogged as output/low [ 0.553601] GPIO line 151 (default_output_low) hogged as output/low [ 0.553627] GPIO line 152 (default_output_low) hogged as output/low [ 0.553660] GPIO line 194 (default_output_low) hogged as output/low [ 0.553693] GPIO line 169 (default_output_low) hogged as output/low [ 0.553728] GPIO line 203 (default_output_low) hogged as output/low [ 0.553760] GPIO line 79 (default_output_low) hogged as output/low [ 0.553792] GPIO line 56 (default_output_low) hogged as output/low [ 0.553824] GPIO line 59 (default_output_low) hogged as output/low [ 0.553856] GPIO line 60 (default_output_low) hogged as output/low [ 0.553889] GPIO line 63 (default_output_low) hogged as output/low [ 0.553921] GPIO line 64 (default_output_low) hogged as output/low [ 0.553953] GPIO line 6 (default_output_high) hogged as output/high [ 0.553984] GPIO line 33 (default_output_high) hogged as output/high [ 0.554019] GPIO line 187 (default_output_high) hogged as output/high [ 0.554051] GPIO line 231 (default_output_high) hogged as output/high [ 0.554085] GPIO line 65 (default_output_high) hogged as output/high [ 0.554119] GPIO line 66 (default_output_high) hogged as output/high [ 0.554491] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.562458] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.562836] SCSI subsystem initialized [ 0.563365] usbcore: registered new interface driver usbfs [ 0.563441] usbcore: registered new interface driver hub [ 0.563527] usbcore: registered new device driver usb [ 0.567461] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.572337] vdd-core: 1000 <--> 1162 mV at 1075 mV [ 0.573009] random: fast init done [ 0.573305] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.576228] vdd-ddr-1v1: 1150 mV [ 0.580398] vdd-pre-reg-1v35: 1350 mV [ 0.584231] vdd-1v8: 1800 mV [ 0.588228] avdd-sys-1v2: 1200 mV [ 0.592228] vdd-pex-1v0: 1050 mV [ 0.592916] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.593467] max77620-ldo3: at 3100 mV [ 0.596234] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.596788] max77620-ldo5: at 3100 mV [ 0.600230] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 1800 mV [ 0.604251] avdd-1v05-pll: 1050 mV [ 0.608225] avdd-io-hdmi-dp: 1050 mV [ 0.610666] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.610998] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.611318] max77620 4-003c: max77620 probe successful [ 0.614008] media: Linux media interface: v0.10 [ 0.614088] Linux video capture interface: v2.00 [ 0.615060] pps_core: LinuxPPS API ver. 1 registered [ 0.615089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.615135] PTP clock support registered [ 0.618386] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.619207] Advanced Linux Sound Architecture Driver Initialized. [ 0.619881] Bluetooth: Core ver 2.22 [ 0.619948] NET: Registered protocol family 31 [ 0.619968] Bluetooth: HCI device and connection manager initialized [ 0.619997] Bluetooth: HCI socket layer initialized [ 0.620018] Bluetooth: L2CAP socket layer initialized [ 0.620057] Bluetooth: SCO socket layer initialized [ 0.621772] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.621810] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.621868] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.621896] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.625487] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.626804] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.626897] vdd-3v3-sys: 3300 mV [ 0.627188] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.629152] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.629630] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.629710] vdd-3v3-sd: 3300 mV [ 0.630566] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.630627] avdd-io-edp-1v05: 1050 mV [ 0.631065] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.631120] vdd-usb-hub-en: 5000 mV [ 0.632549] camchar: rtcpu character device driver loaded [ 0.633426] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:2 [ 0.634765] clocksource: Switched to clocksource arch_sys_counter [ 0.675661] VFS: Disk quotas dquot_6.6.0 [ 0.675837] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.676328] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676730] dma_declare_coherent_resizable_cma_memory:323: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.676782] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.676997] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.677021] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.677049] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.677100] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.677128] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.677162] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.677185] nvmap_page_pool_init: Total RAM pages: 1011904 [ 0.677204] nvmap_page_pool_init: nvmap page pool size: 126488 pages (494 MB) [ 0.677421] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677771] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.678750] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.686824] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.687313] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.687688] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.687991] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.688196] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.688503] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.688526] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.688965] NET: Registered protocol family 2 [ 0.689946] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.690184] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.690694] TCP: Hash tables configured (established 32768 bind 32768) [ 0.690925] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691031] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691472] NET: Registered protocol family 1 [ 0.692246] RPC: Registered named UNIX socket transport module. [ 0.692276] RPC: Registered udp transport module. [ 0.692294] RPC: Registered tcp transport module. [ 0.692312] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.702218] host1x 50000000.host1x: initialized [ 0.703991] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.707180] audit: initializing netlink subsys (disabled) [ 0.707320] audit: type=2000 audit(0.555:1): initialized [ 0.708090] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.717977] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.719519] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.720354] 9p: Installing v9fs 9p2000 file system support [ 0.723600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.723770] io scheduler noop registered [ 0.724073] io scheduler cfq registered (default) [ 0.726714] gic 702f9000.agic: GIC IRQ controller registered [ 0.729562] iommu: Adding device 702ef000.adsp to group 32 [ 0.737451] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 0.737605] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.738193] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x722740f [ 0.738227] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.740081] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.740225] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.740341] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.740552] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-1, function = pcie-x4 [ 0.740668] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-2, function = pcie-x4 [ 0.740776] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-3, function = pcie-x4 [ 0.740885] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-4, function = pcie-x4 [ 0.740995] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-5, function = xusb [ 0.741105] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-6, function = xusb [ 0.747198] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.748877] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.750634] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.751943] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.752303] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.754191] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.754440] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.754918] Adding domain tsec-pd to PM domain host1x-pd [ 0.758035] tsec 54500000.tsec: initialized [ 0.759444] tsec 54100000.tsecb: initialized [ 0.760184] Adding domain nvdec-pd to PM domain host1x-pd [ 0.763662] nvdec 54480000.nvdec: initialized [ 0.764762] Adding domain vic03-pd to PM domain host1x-pd [ 0.764967] Adding domain msenc-pd to PM domain host1x-pd [ 0.765143] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.769329] falcon 54340000.vic: initialized [ 0.770581] falcon 544c0000.nvenc: initialized [ 0.772012] falcon 54380000.nvjpg: initialized [ 0.776399] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 0.776473] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.776522] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.776560] tegradc tegradc.1: disp0 connected to head1->/host1x/sor [ 0.776663] Node path /chosen/display-board not found [ 0.776682] display board info: id 0x0, fab 0x0 [ 0.776780] tegradc tegradc.1: No lt-data, using default setting [ 0.776816] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.776823] tegradc tegradc.1: No hpd-gpio in DT [ 0.776854] tegradc tegradc.1: DT parsed successfully [ 0.776857] tegra_cec 70015000.tegra_cec: probed [ 0.776941] tegradc tegradc.1: Display dc.ffffff800ae80000 registered with id=0 [ 0.778436] tegradc tegradc.1: dpd enable lookup fail:-19 [ 0.779696] tegradc tegradc.1: probed [ 0.780111] tegradc tegradc.1: fb registered [ 0.784582] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.790396] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 0.791206] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 0.791239] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.791578] kfuse 7000fc00.kfuse: initialized [ 0.792498] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.792803] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 0.792835] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.792857] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 0.792879] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 0.792907] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.793402] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.793407] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.793708] tegradc tegradc.1: nominal-pclk:25200000 parent:25200000 div:1.0 pclk:25200000 24948000~27468000 [ 0.794638] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.794682] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.795116] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.795967] vdd-gpu: applied init 1000000uV constraint [ 0.795993] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.796351] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.800017] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 0.800038] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.800127] No Device Node present for smmu client: serial8250 !! [ 0.800153] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.800216] iommu: Adding device serial8250 to group 34 [ 0.800500] tegradc tegradc.1: dp: irq event received, ignoring [ 0.802529] console [ttyS0] disabled [ 0.802621] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 0.803723] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 0.803925] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 0.803939] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 0.803963] pci 0000:01:00.0: BAR 2: assigned [mem 0x13002000-0x130020ff 64bit] [ 0.803986] pci 0000:01:00.0: BAR 4: assigned [mem 0x13002100-0x130021ff 64bit] [ 0.804010] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.804018] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 0.804446] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.804451] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.808556] dp lt: state 0 (Reset), pending_lt_evt 1 [ 0.808560] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 0.808564] dp lt: state 0 (Reset), pending_lt_evt 0 [ 0.809765] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 0.809909] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 0.809913] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 0.810149] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 0.810158] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 0.810165] dp lt: tx_pu: 0x20 [ 0.810772] dp lt: CR done [ 0.810775] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 0.810780] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 0.812726] dp lt: CE done [ 0.812731] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 0.815645] tegradc tegradc.1: nominal-pclk:157100000 parent:157098632 div:1.0 pclk:157098632 155529000~171239000 [ 1.782796] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 1.782801] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 3.704545] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 3.704549] console [ttyS0] enabled [ 3.704552] tegradc tegradc.1: blank - powerdown [ 3.715865] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.716169] serial-tegra 70006200.serial: RX in PIO mode [ 3.716252] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.717191] [drm] Initialized [ 3.734840] brd: module loaded [ 3.740016] loop: module loaded [ 3.740124] tegra_profiler: version: 1.143, samples/io: 48/28 [ 3.740241] tegra_profiler: auth: init [ 3.741610] THERMAL EST: found 2 subdevs [ 3.741618] THERMAL EST num_resources: 0 [ 3.741624] [THERMAL EST subdev 0] [ 3.741630] [THERMAL EST subdev 1] [ 3.742100] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.742104] THERMAL EST: thz register success. [ 3.742269] THERMAL EST: end of probe, return err: 0 [ 3.743555] sd: No Scsi addr parsed to reserve index [ 3.743591] hisi_sas: driver version v1.6 [ 3.747371] tegra-qspi 70410000.spi: Prod settings list not found [ 3.748604] qspi_mtd spi32766.0: unrecognized JEDEC id 000000 [ 3.749780] libphy: Fixed MDIO Bus: probed [ 3.750414] microchipphy_genl_init() [ 3.750584] tun: Universal TUN/TAP device driver, 1.6 [ 3.750586] tun: (C) 1999-2004 Max Krasnyansky [ 3.751460] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 3.751465] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 3.751472] dp lt: state 0 (Reset), pending_lt_evt 0 [ 3.751477] dp lt: link training force disable [ 3.751481] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 3.751697] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.751700] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.751768] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.751771] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.751947] sky2: driver version 1.30 [ 3.752406] lan743x 0000:01:00.0: enabling device (0000 -> 0002) [ 3.752429] lan743x 0000:01:00.0 (unnamed net_device) (uninitialized): PCI: Vendor ID = 0x1055, Device ID = 0x7431 [ 3.752508] lan743x 0000:01:00.0 (unnamed net_device) (uninitialized): ID_REV = 0x74310011, FPGA_REV = 0.0 [ 3.772189] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 3.807793] tegradc tegradc.1: unblank [ 3.840008] tegradc tegradc.1: nominal-pclk:157100000 parent:157098632 div:1.0 pclk:157098632 155529000~171239000 [ 3.846290] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 3.846443] tegradc tegradc.1: dp: irq event received, ignoring [ 3.850119] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 3.850799] lan743x 0000:01:00.0 (unnamed net_device) (uninitialized): MAC address set to aa:bb:cc:dd:ee:ff [ 3.854806] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 3.854810] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 3.854814] dp lt: state 0 (Reset), pending_lt_evt 0 [ 3.856012] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 3.856154] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 3.856158] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 3.856395] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 3.856404] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 3.856410] dp lt: tx_pu: 0x20 [ 3.857097] dp lt: CR done [ 3.857100] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 3.857105] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 3.859062] dp lt: CE done [ 3.859066] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 3.875803] tegradc tegradc.1: sync windows ret = 246 [ 4.003200] libphy: lan743x-mdiobus: probed [ 4.005056] PPP generic driver version 2.4.2 [ 4.005772] PPP BSD Compression module registered [ 4.005777] PPP Deflate Compression module registered [ 4.005824] PPP MPPE Compression module registered [ 4.005832] NET: Registered protocol family 24 [ 4.005923] usbcore: registered new interface driver r8152 [ 4.005978] usbcore: registered new interface driver asix [ 4.006087] usbcore: registered new interface driver ax88179_178a [ 4.006132] usbcore: registered new interface driver cdc_ether [ 4.006170] usbcore: registered new interface driver net1080 [ 4.006209] usbcore: registered new interface driver cdc_subset [ 4.006247] usbcore: registered new interface driver zaurus [ 4.006359] usbcore: registered new interface driver cdc_ncm [ 4.006574] VFIO - User Level meta-driver version: 0.3 [ 4.008149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.008181] ehci-pci: EHCI PCI platform driver [ 4.008231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.008243] ohci-pci: OHCI PCI platform driver [ 4.008292] ohci-platform: OHCI generic platform driver [ 4.011184] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 4.011823] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 4.013009] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f944b800 id [ 4.014801] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 4.014859] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.014887] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 4.015689] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 4.015758] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 4.015975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.015981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.015986] usb usb1: Product: xHCI Host Controller [ 4.015990] usb usb1: Manufacturer: Linux 4.9.201-l4t-r32.5-g8f97b4ec4c5b-dirty xhci-hcd [ 4.015993] usb usb1: SerialNumber: 70090000.xusb [ 4.016310] usbcore: registered new interface driver uas [ 4.016629] hub 1-0:1.0: USB hub found [ 4.016670] hub 1-0:1.0: 5 ports detected [ 4.017274] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.017285] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 4.017366] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.017536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.017540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.017544] usb usb2: Product: xHCI Host Controller [ 4.017547] usb usb2: Manufacturer: Linux 4.9.201-l4t-r32.5-g8f97b4ec4c5b-dirty xhci-hcd [ 4.017551] usb usb2: SerialNumber: 70090000.xusb [ 4.018062] hub 2-0:1.0: USB hub found [ 4.018092] hub 2-0:1.0: 4 ports detected [ 4.018637] usbcore: registered new interface driver usb-storage [ 4.019033] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 4.019038] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 4.019258] usbcore: registered new interface driver usbserial [ 4.023129] tegra-xudc-new 700d0000.xudc: device count: 1 [ 4.024873] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 4.024887] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 4.024923] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.025192] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.025916] g_serial gadget: Gadget Serial v2.4 [ 4.025920] g_serial gadget: g_serial ready [ 4.025929] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.026541] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.026566] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.026591] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.026844] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.026866] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.027844] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.027854] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.028092] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.028359] mousedev: PS/2 mouse device common for all mice [ 4.028477] usbcore: registered new interface driver xpad [ 4.114920] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 4.114987] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 4.115257] usb usb2: usb_suspend_both: status 0 [ 4.147968] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.150386] rtc rtc1: alarm rtc device [ 4.150402] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 4.150432] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 4.151056] i2c /dev entries driver [ 4.153352] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.155937] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 4.155943] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 4.156419] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.156438] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 4.156449] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 4.156585] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.156595] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 4.156601] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 4.156748] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.156759] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 4.156764] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 4.156977] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 4.157878] tegra_aotag tegra-aotag: Registering sensor 0 [ 4.157936] tegra_aotag tegra-aotag: Invalid temp readout [ 4.157962] tegra_aotag tegra-aotag: Invalid temp readout [ 4.157980] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 4.157988] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 4.159186] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.159208] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 4.159430] tegra_aotag tegra-aotag: Invalid temp readout [ 4.159463] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 4.159989] parse_throttle_dt_data: Num cap clks = 6 [ 4.159994] parse_throttle_dt_data: clk=cclk_g type=2 [ 4.160007] parse_throttle_dt_data: clk=gpu type=4 [ 4.160035] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 4.160054] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 4.160075] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 4.160079] parse_throttle_dt_data: clk=emc type=3 [ 4.160577] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.160701] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.160843] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.161659] FAN dev name: pwm-fan [ 4.161746] FAN:gpio request success. [ 4.161830] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 4.162152] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.162329] pwm_fan_driver pwm-fan: fan tach request irq success [ 4.162339] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.162422] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.162426] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 4.162431] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 4.162436] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 4.162440] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.162444] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.162448] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.162452] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.162456] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.162460] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.164019] softdog-platform soft_watchdog: Software Watchdog Timer: initialized [ 4.164728] device-mapper: uevent: version 1.0.3 [ 4.165192] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.169806] tegra210-cpufreq cpufreq: probe()...completed [ 4.171149] sdhci: Secure Digital Host Controller Interface driver [ 4.171151] sdhci: Copyright(c) Pierre Ossman [ 4.171154] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.171754] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 4.177559] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 4.185411] tegra-se 70012000.se: tegra_se_probe: complete [ 4.186146] hidraw: raw HID events driver (C) Jiri Kosina [ 4.188043] usbcore: registered new interface driver usbhid [ 4.188046] usbhid: USB HID core driver [ 4.188887] tegra-vii2c 546c0000.i2c: arb lost in communicate to add 0x40 [ 4.188969] tegra-vii2c 546c0000.i2c: Un-recovered Arb lost [ 4.188989] ina3221x 6-0040: ina3221 reset failure status: 0xfffffff5 [ 4.189201] ina3221x: probe of 6-0040 failed with error -11 [ 4.190732] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 4.191228] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 4.194383] nvpmodel: initialized successfully [ 4.196532] usbcore: registered new interface driver snd-usb-audio [ 4.196649] No Device Node present for smmu client: snd-soc-dummy !! [ 4.196658] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 4.196696] iommu: Adding device snd-soc-dummy to group 35 [ 4.205621] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 4.214968] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 4.229157] OPE platform probe [ 4.229338] OPE platform probe successful [ 4.229634] OPE platform probe [ 4.229752] OPE platform probe successful [ 4.231015] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 4.256922] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.257131] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.257325] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.257515] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.257707] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.257888] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.258082] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.258281] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.258470] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.258676] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.273238] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.277949] u32 classifier [ 4.277953] Actions configured [ 4.278083] Initializing XFRM netlink socket [ 4.278367] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 4.278711] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 4.279097] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 4.279236] NET: Registered protocol family 10 [ 4.280278] NET: Registered protocol family 17 [ 4.280302] NET: Registered protocol family 15 [ 4.280404] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.281055] Bluetooth: RFCOMM socket layer initialized [ 4.281081] Bluetooth: RFCOMM ver 1.11 [ 4.281089] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.281096] Bluetooth: HIDP socket layer initialized [ 4.281122] 9pnet: Installing 9P2000 support [ 4.281224] Key type dns_resolver registered [ 4.283354] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 4.286324] Registered cp15_barrier emulation handler [ 4.286736] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 [ 4.291885] Registered setend emulation handler [ 4.293608] registered taskstats version 1 [ 4.295009] Adding domain ve2-pd to PM domain host1x-pd [ 4.295314] Adding domain ve-pd to PM domain host1x-pd [ 4.346796] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.367577] usb 1-2: New USB device found, idVendor=0424, idProduct=2514 [ 4.367582] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.369148] hub 1-2:1.0: USB hub found [ 4.369243] hub 1-2:1.0: 4 ports detected [ 4.482396] mmc1: hw tuning done ... [ 4.488957] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.498782] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 4.498820] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 4.518774] usb 1-2: usb_suspend_both: status 0 [ 4.523473] usb 1-3: New USB device found, idVendor=0424, idProduct=2514 [ 4.523477] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.524539] hub 1-3:1.0: USB hub found [ 4.524627] hub 1-3:1.0: 4 ports detected [ 4.654775] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 2 [ 4.674773] usb 1-3: usb_suspend_both: status 0 [ 4.674862] usb usb1: usb_suspend_both: status 0 [ 5.470580] ************************************************************** dc1 [ 5.480444] ************************************************************** end [ 5.489535] isp 54600000.isp: initialized [ 5.495232] isp 54680000.isp: initialized [ 5.518734] last reset is due to software reset [ 5.523367] KERNEL: PMC reset status reg: 0x3 [ 5.532079] clk_cbus_recalc_rate: no gbus parent [ 5.536766] clk_cbus_round_rate: no gbus parent [ 5.541307] clk_cbus_round_rate: no gbus parent [ 5.545878] clk_cbus_recalc_rate: no gbus parent [ 5.550731] clk_cbus_recalc_rate: no gbus parent [ 5.555367] clk_cbus_round_rate: no gbus parent [ 5.559900] clk_cbus_round_rate: no gbus parent [ 5.564437] clk_cbus_recalc_rate: no gbus parent [ 5.569073] tegra_dvfs: GPU-cap: registered [ 5.573400] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 5.582106] tegra dvfs: vdd-core: nominal 1075mV, offset 1000000uV, step 12500uV, scaling enabled [ 5.590982] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 5.602244] tegra_dvfs: vdd-gpu-vts: registered [ 5.608027] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 5.618166] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 5.628474] input: gpio-keys as /devices/gpio-keys/input/input1 [ 5.667939] tegra_rtc 7000e000.rtc: setting system clock to 2022-04-21 18:04:30 UTC (1650564270) [ 5.679448] vi 54080000.vi: vi_probe: ++ [ 5.687510] vi 54080000.vi: initialized [ 5.694066] vi 54080000.vi: subdev nvcsi--2 bound [ 5.699709] vi 54080000.vi: subdev nvcsi--1 bound [ 5.705620] mmcblk mmc0:0001: Card claimed for testing. [ 5.712159] Disable partitions left on by BL [ 5.716467] disb [ 5.718586] bwmgr: missing cdev-type property [ 5.723142] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.732479] DRAM derating cdev registered. [ 5.738702] ALSA device list: [ 5.741709] #0: tegra-hda at 0x70038000 irq 81 [ 5.746353] #1: tegra-snd-t210ref-mobile-rt565x [ 5.760096] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.768276] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.776330] devtmpfs: mounted [ 5.788081] Freeing unused kernel memory: 8576K [ 5.869660] cgroup: cgroup2: unknown option "nsdelegate" [ 5.887039] systemd[1]: systemd 247 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 5.910071] systemd[1]: Detected architecture arm64. [ 5.944771] systemd[1]: Set hostname to . [ 6.018971] tegra-xusb 70090000.xusb: entering ELPG [ 6.024999] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 0, speed 0 [ 6.032942] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 6.040591] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 3 [ 6.049694] tegra-xusb 70090000.xusb: entering ELPG done [ 6.302222] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock ��→ /run/docker.sock; please update the unit file accordingly. [ 6.359752] systemd[1]: Queued start job for default target Graphical Interface. [ 6.368892] random: systemd: uninitialized urandom read (16 bytes read) [ 6.421925] systemd[1]: Created slice system-getty.slice. [ 6.428059] random: systemd: uninitialized urandom read (16 bytes read) [ 6.436819] systemd[1]: Created slice system-modprobe.slice. [ 6.442882] random: systemd: uninitialized urandom read (16 bytes read) [ 6.451093] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.459435] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.467394] systemd[1]: Created slice User and Session Slice. [ 6.473616] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.482018] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.490021] systemd[1]: Reached target User and Group Name Lookups. [ 6.496478] systemd[1]: Reached target Paths. [ 6.501000] systemd[1]: Reached target Remote File Systems. [ 6.506722] systemd[1]: Reached target Slices. [ 6.511352] systemd[1]: Reached target Swap. [ 6.518197] systemd[1]: Listening on Syslog Socket. [ 6.523633] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.531178] systemd[1]: Listening on Journal Audit Socket. [ 6.537173] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.543642] systemd[1]: Listening on Journal Socket. [ 6.549220] systemd[1]: Listening on Network Service Netlink Socket. [ 6.556135] systemd[1]: Listening on udev Control Socket. [ 6.561971] systemd[1]: Listening on udev Kernel Socket. [ 6.567714] systemd[1]: Listening on User Database Manager Socket. [ 6.578062] systemd[1]: Mounting Huge Pages File System... [ 6.589831] systemd[1]: Mounting POSIX Message Queue File System... [ 6.601690] systemd[1]: Mounting Kernel Debug File System... [ 6.612520] systemd[1]: Mounting Kernel Trace File System... [ 6.626143] systemd[1]: Mounting Temporary Directory (/tmp)... [ 6.640220] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.655021] systemd[1]: Starting Load Kernel Module configfs... [ 6.667978] systemd[1]: Starting Load Kernel Module drm... [ 6.678072] systemd[1]: Starting Load Kernel Module fuse... [ 6.697407] systemd[1]: Starting NVIDIA-specific startup... [ 6.712390] systemd[1]: Starting Start psplash boot splash screen... [ 6.716274] fuse init (API version 7.26) [ 6.723763] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.734012] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 6.747105] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 6.762687] systemd[1]: Starting Journal Service... [ 6.776873] systemd[1]: Starting Load Kernel Modules... [ 6.790242] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.805616] systemd[1]: Starting Coldplug All udev Devices... [ 6.826077] systemd[1]: Started Start psplash boot splash screen. [ 6.838707] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=5 [ 6.840781] Bridge firewalling registered [ 6.856149] systemd[1]: Mounted Huge Pages File System. [ 6.862937] systemd[1]: Mounted POSIX Message Queue File System. [ 6.876035] systemd[1]: Mounted Kernel Debug File System. [ 6.882980] systemd[1]: Mounted Kernel Trace File System. [ 6.889359] systemd[1]: Mounted Temporary Directory (/tmp). [ 6.898297] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.908639] systemd[1]: modprobe@configfs.service: Succeeded. [ 6.916396] systemd[1]: Finished Load Kernel Module configfs. [ 6.924218] systemd[1]: modprobe@drm.service: Succeeded. [ 6.945348] systemd[1]: Finished Load Kernel Module drm. [ 6.952050] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.005508] systemd[1]: Finished Load Kernel Module fuse. [ 7.025077] systemd[1]: Finished NVIDIA-specific startup. [ 7.063063] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.071815] systemd[1]: Started Journal Service. [ 7.210587] systemd-journald[2050]: Received client request to flush runtime journal. [ 7.977408] input: ilitek_ts as /devices/7000c000.i2c/i2c-0/0-0041/input/input2 [ 8.007042] DSA: switch 0 0 parsed [ 8.010472] DSA: tree 0 parsed [ 8.170043] random: crng init done [ 8.173475] random: 7 urandom warning(s) missed due to ratelimiting [ 8.236856] libphy: dsa slave smi: probed [ 8.311995] Microchip KSZ8795 dsa-0.0:00: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:00, irq=-1) [ 8.408852] Microchip KSZ8795 dsa-0.0:01: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:01, irq=-1) [ 8.511578] Microchip KSZ8795 dsa-0.0:02: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:02, irq=-1) [ 8.600163] Microchip KSZ8795 dsa-0.0:03: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:03, irq=-1) [ 9.106532] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1264 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 9.120064] [drm] Initialized tegra-udrm 0.0.0 20182809 on minor 0 [ 9.272485] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: commit=5 [ 10.115980] 8021q: 802.1Q VLAN Support v1.8 [ 10.217241] systemd-journald[2050]: Received client request to flush runtime journal. [ 10.719734] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 10.735279] lan743x 0000:01:00.0 eth0: using MSIX interrupts, number of vectors = 6 [ 10.746195] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=-1) [ 10.746277] lan743x 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 10.746709] lan743x 0000:01:00.0 eth0: successfully registered ptp clock [ 10.756784] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.756876] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.959988] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 11.036530] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 11.069091] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 11.082907] tegradc tegradc.1: unblank [ 11.113075] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 11.891469] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 11.964343] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 11.991618] ksz8795-switch spi0.0 lan1: Link is Down [ 12.056062] ksz8795-switch spi0.0 lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.064354] IPv6: ADDRCONF(NETDEV_CHANGE): lan2: link becomes ready [ 12.087235] ksz8795-switch spi0.0 lan3: Link is Down [ 12.105915] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 12.119948] ksz8795-switch spi0.0 lan4: Link is Down [ 12.172165] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 12.760810] tegradc tegradc.1: unblank [ 15.239790] tegradc tegradc.1: unblank [ 16.945618] tegradc tegradc.1: blank - powerdown [ 17.007278] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 17.007285] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 17.007289] dp lt: state 0 (Reset), pending_lt_evt 0 [ 17.007293] dp lt: link training force disable [ 17.007295] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) Poky (Yocto Project Reference Distro) 3.3.1 jetson-nano-hive-emmc ttyS0 jetson-nano-hive-emmc login: [ 18.033827] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 18.121677] tegradc tegradc.1: blank - powerdown [ 18.137242] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 18.145534] tegradc tegradc.1: unblank [ 18.175525] tegradc tegradc.1: nominal-pclk:157100000 parent:157098632 div:1.0 pclk:157098632 155529000~171239000 [ 18.182035] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 18.185767] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 18.189042] tegradc tegradc.1: dp: irq event received, ignoring [ 18.190612] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 18.190616] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 18.190618] dp lt: state 0 (Reset), pending_lt_evt 0 [ 18.191807] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 18.191942] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 18.191947] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 18.192180] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 18.192187] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 18.192193] dp lt: tx_pu: 0x20 [ 18.192874] dp lt: CR done [ 18.192877] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 18.192881] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 18.194819] dp lt: CE done [ 18.194822] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 18.211879] tegradc tegradc.1: sync windows ret = 246 [ 18.357571] tegradc tegradc.1: unblank [ 18.745543] tegradc tegradc.1: unblank r[ 19.855918] tegradc tegradc.1: unblank oot Password: Last login: Thu Apr 21 18:03:12 UTC 2022 on ttyS0 [ 23.801639] audit: type=1006 audit(1650564288.627:2): pid=5275 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ 24.338928] tegradc tegradc.1: unblank root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-l4t-r32.5-g8f97b4ec4c5b-dirty (default@ubuntu-20) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1) ) #15 SMP PREEMPT Wed Apr 20 15:24:26 MDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0 ,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt console=ttyS0,115200 console=tty0 fbcon=map:0 net.if names=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 fbcon=map:1 fbcon=rotate:2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29632(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3572480K/4159488K available (15230K kernel code, 2914K rwdata, 9888K rodata, 8576K init, 607K bss, 111872K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff8009910000 ( 9920 KB) [ 0.000000] .init : 0xffffff8009910000 - 0xffffff800a170000 ( 8576 KB) [ 0.000000] .data : 0xffffff800a170000 - 0xffffff800a448808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a448808 - 0xffffff800a4e07ac ( 608 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001708] Console: colour dummy device 80x25 [ 0.002601] console [tty0] enabled [ 0.002628] kmemleak: Kernel memory leak detector disabled [ 0.002659] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002694] pid_max: default: 32768 minimum: 301 [ 0.003152] Security Framework initialized [ 0.003386] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003407] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004615] ftrace: allocating 47888 entries in 188 pages [ 0.178931] sched-energy: CPU device node has no sched-energy-costs [ 0.178963] ASID allocator initialised with 65536 entries [ 0.215825] tegra-id: chipid=22117. [ 0.215865] tegra-id: opt_subrevision=0. [ 0.215895] Tegra Speedo/IDDQ fuse revision 4 [ 0.215912] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.215929] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.215946] Tegra: CPU Speedo Value 2051, SoC Speedo Value 1960, GPU Speedo Value 2058 [ 0.215970] Tegra: CPU IDDQ Value 1832, SoC IDDQ Value 2044, GPU IDDQ Value 2500 [ 0.216007] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.216031] DTS File Name: /home/default/p/linux-tegra-4.9/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-hivebp1v0-b00.dts [ 0.216069] DTB Build time: Apr 20 2022 18:19:25 [ 0.265061] CPU1: Booted secondary processor [411fd071] [ 0.296959] CPU2: Booted secondary processor [411fd071] [ 0.328944] CPU3: Booted secondary processor [411fd071] [ 0.329039] Brought up 4 CPUs [ 0.329103] SMP: Total of 4 processors activated. [ 0.329123] CPU features: detected feature: 32-bit EL0 Support [ 0.329396] CPU: All CPU(s) started at EL2 [ 0.329426] alternatives: patching kernel code [ 0.337582] devtmpfs: initialized [ 0.376486] Initilizing CustomIPI irq domain [ 0.376902] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.376958] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.387500] pinctrl core: initialized pinctrl subsystem [ 0.388576] regulator-dummy: no parameters [ 0.388867] Initializing plugin-manager [ 0.389036] Plugin module not found [ 0.389242] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389261] Error in parsing node /plugin-manager/fragement@0: -22 [ 0.389399] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389414] Error in parsing node /plugin-manager/fragment@1: -22 [ 0.389553] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389567] Error in parsing node /plugin-manager/fragment@2: -22 [ 0.389705] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389720] Error in parsing node /plugin-manager/fragment@3: -22 [ 0.389858] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.389872] Error in parsing node /plugin-manager/fragment@4: -22 [ 0.390011] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390026] Error in parsing node /plugin-manager/fragment@5: -22 [ 0.390162] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390177] Error in parsing node /plugin-manager/fragement@6: -22 [ 0.390313] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390328] Error in parsing node /plugin-manager/fragement@7: -22 [ 0.390465] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390479] Error in parsing node /plugin-manager/fragement@8: -22 [ 0.390637] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390652] Error in parsing node /plugin-manager/fragement@9: -22 [ 0.390822] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390836] Error in parsing node /plugin-manager/fragement@10: -22 [ 0.390973] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.390987] Error in parsing node /plugin-manager/fragment@12: -22 [ 0.391128] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391144] Error in parsing node /plugin-manager/fragement@13: -22 [ 0.391295] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391310] Error in parsing node /plugin-manager/fragment-e2614-common@0: -22 [ 0.391455] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391470] Error in parsing node /plugin-manager/fragment-e2614-a00@1: -22 [ 0.391609] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391624] Error in parsing node /plugin-manager/fragment-e2614-b00@2: -22 [ 0.391760] chosen/plugin-manager does'nt have ids, nct and odm-data [ 0.391775] Error in parsing node /plugin-manager/fragment-e2614-pins@3: -22 [ 0.394798] NET: Registered protocol family 16 [ 0.396496] pstore: using zlib compression [ 0.397138] console [pstore-1] enabled [ 0.397157] pstore: Registered ramoops as persistent store backend [ 0.397177] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.413079] cpuidle: using governor menu [ 0.416382] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.418246] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff800a174000) [ 0.418298] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.421472] atomic_pool_init():621: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.423934] Serial: AMBA PL011 UART driver [ 0.424449] tegra_powergate_init: DONE [ 0.424484] DTS File Name: /home/default/p/linux-tegra-4.9/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-hivebp1v0-b00.dts [ 0.424524] DTB Build time: Apr 20 2022 18:19:25 [ 0.426562] Tegra reboot handler registered. [ 0.431128] iommu: Adding device tegra-carveouts to group 0 [ 0.431297] platform tegra-carveouts: domain=ffffffc0f9be23d8 allocates as[0]=ffffffc0f94580a8 [ 0.431679] iommu: Adding device smmu_test to group 1 [ 0.431743] platform smmu_test: domain=ffffffc0f9be2618 allocates as[0]=ffffffc0f9458110 [ 0.432553] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.432627] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.432709] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.432734] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.432768] mc-err: mcerr ops are set to t21x [ 0.441913] iommu: Adding device 70090000.xusb to group 2 [ 0.442216] iommu: Adding device 70006000.serial to group 3 [ 0.442303] platform 70006000.serial: domain=ffffffc0f9b70618 allocates as[0]=ffffffc0f9458178 [ 0.442742] iommu: Adding device 70006040.serial to group 4 [ 0.443017] iommu: Adding device 70006200.serial to group 5 [ 0.443259] iommu: Adding device sound to group 6 [ 0.443325] platform sound: domain=ffffffc0f9b70b58 allocates as[0]=ffffffc0f94581e0 [ 0.443897] iommu: Adding device 7000d400.spi to group 7 [ 0.444197] iommu: Adding device 70410000.spi to group 8 [ 0.444521] iommu: Adding device 50000000.host1x to group 9 [ 0.444802] iommu: Adding device 54080000.vi to group 10 [ 0.445277] iommu: Adding device 54600000.isp to group 11 [ 0.445551] iommu: Adding device 54680000.isp to group 12 [ 0.445845] iommu: Adding device tegradc.1 to group 13 [ 0.445932] platform tegradc.1: domain=ffffffc0f94c8918 allocates as[0]=ffffffc0f9458248 [ 0.446477] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.446728] iommu: Adding device 54340000.vic to group 14 [ 0.446960] iommu: Adding device 544c0000.nvenc to group 15 [ 0.447171] iommu: Adding device 54500000.tsec to group 16 [ 0.447381] iommu: Adding device 54100000.tsecb to group 17 [ 0.447598] iommu: Adding device 54480000.nvdec to group 18 [ 0.447807] iommu: Adding device 54380000.nvjpg to group 19 [ 0.448863] iommu: Adding device 546c0000.i2c to group 20 [ 0.449266] iommu: Adding device 57000000.gpu to group 21 [ 0.449361] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[0]=ffffffc0f94582b0 [ 0.449419] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[1]=ffffffc0f9458318 [ 0.449477] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[2]=ffffffc0f9458380 [ 0.449534] platform 57000000.gpu: domain=ffffffc0f94d3918 allocates as[3]=ffffffc0f94583e8 [ 0.450412] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.450455] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.450481] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.450502] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.450519] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.501149] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.501188] tegra-pmc: Clear bootloader IO dpd settings [ 0.501224] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.501305] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.501598] iommu: Adding device 70012000.se to group 22 [ 0.502360] iommu: Adding device 7000c000.i2c to group 23 [ 0.502630] iommu: Adding device 7000c400.i2c to group 24 [ 0.502895] iommu: Adding device 7000c500.i2c to group 25 [ 0.503150] iommu: Adding device 7000c700.i2c to group 26 [ 0.503411] iommu: Adding device 7000d000.i2c to group 27 [ 0.503675] iommu: Adding device 7000d100.i2c to group 28 [ 0.503952] iommu: Adding device sdhci-tegra.3 to group 29 [ 0.504048] platform sdhci-tegra.3: domain=ffffffc0f954ea98 allocates as[0]=ffffffc0f9458450 [ 0.504499] iommu: Adding device sdhci-tegra.2 to group 30 [ 0.504573] platform sdhci-tegra.2: domain=ffffffc0f954ecd8 allocates as[0]=ffffffc0f94584b8 [ 0.505441] iommu: Adding device 700d0000.xudc to group 31 [ 0.508612] vdd-ac-bat: 5000 mV [ 0.509005] vdd-5v0-sys: 5000 mV [ 0.509953] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.510043] vdd-5v0-hdmi: 5000 mV [ 0.510451] vdd-1v8-sys: 1800 mV [ 0.510851] vdd-fan: supplied by vdd-5v0-sys [ 0.510905] vdd-fan: 5000 mV [ 0.511300] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.511375] vdd-usb-vbus: 5000 mV [ 0.511936] vdd-usb-vbus2: 5000 mV [ 0.549999] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552473] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.552526] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.552579] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.552618] GPIO line 12 (default_input) hogged as input [ 0.552648] GPIO line 13 (default_input) hogged as input [ 0.552678] GPIO line 14 (default_input) hogged as input [ 0.552708] GPIO line 15 (default_input) hogged as input [ 0.552739] GPIO line 232 (default_input) hogged as input [ 0.552770] GPIO line 34 (default_input) hogged as input [ 0.552801] GPIO line 35 (default_input) hogged as input [ 0.552834] GPIO line 38 (default_input) hogged as input [ 0.552864] GPIO line 147 (default_input) hogged as input [ 0.552896] GPIO line 149 (default_input) hogged as input [ 0.552925] GPIO line 5 (default_input) hogged as input [ 0.553007] GPIO line 188 (default_input) hogged as input [ 0.553043] GPIO line 189 (default_input) hogged as input [ 0.553076] GPIO line 190 (default_input) hogged as input [ 0.553110] GPIO line 193 (default_input) hogged as input [ 0.553148] GPIO line 200 (default_input) hogged as input [ 0.553183] GPIO line 202 (default_input) hogged as input [ 0.553216] GPIO line 77 (default_input) hogged as input [ 0.553247] GPIO line 78 (default_input) hogged as input [ 0.553277] GPIO line 76 (default_input) hogged as input [ 0.553309] GPIO line 50 (default_input) hogged as input [ 0.553340] GPIO line 51 (default_input) hogged as input [ 0.553376] GPIO line 20 (default_input) hogged as input [ 0.553409] GPIO line 58 (default_input) hogged as input [ 0.553441] GPIO line 61 (default_input) hogged as input [ 0.553474] GPIO line 62 (default_input) hogged as input [ 0.553506] GPIO line 228 (default_input) hogged as input [ 0.553543] GPIO line 216 (default_output_low) hogged as output/low [ 0.553574] GPIO line 32 (default_output_low) hogged as output/low [ 0.553601] GPIO line 151 (default_output_low) hogged as output/low [ 0.553627] GPIO line 152 (default_output_low) hogged as output/low [ 0.553660] GPIO line 194 (default_output_low) hogged as output/low [ 0.553693] GPIO line 169 (default_output_low) hogged as output/low [ 0.553728] GPIO line 203 (default_output_low) hogged as output/low [ 0.553760] GPIO line 79 (default_output_low) hogged as output/low [ 0.553792] GPIO line 56 (default_output_low) hogged as output/low [ 0.553824] GPIO line 59 (default_output_low) hogged as output/low [ 0.553856] GPIO line 60 (default_output_low) hogged as output/low [ 0.553889] GPIO line 63 (default_output_low) hogged as output/low [ 0.553921] GPIO line 64 (default_output_low) hogged as output/low [ 0.553953] GPIO line 6 (default_output_high) hogged as output/high [ 0.553984] GPIO line 33 (default_output_high) hogged as output/high [ 0.554019] GPIO line 187 (default_output_high) hogged as output/high [ 0.554051] GPIO line 231 (default_output_high) hogged as output/high [ 0.554085] GPIO line 65 (default_output_high) hogged as output/high [ 0.554119] GPIO line 66 (default_output_high) hogged as output/high [ 0.554491] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.562458] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.562836] SCSI subsystem initialized [ 0.563084] libata version 3.00 loaded. [ 0.563365] usbcore: registered new interface driver usbfs [ 0.563441] usbcore: registered new interface driver hub [ 0.563527] usbcore: registered new device driver usb [ 0.567461] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.572337] vdd-core: 1000 <--> 1162 mV at 1075 mV [ 0.573009] random: fast init done [ 0.573305] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.576228] vdd-ddr-1v1: 1150 mV [ 0.580398] vdd-pre-reg-1v35: 1350 mV [ 0.584231] vdd-1v8: 1800 mV [ 0.588228] avdd-sys-1v2: 1200 mV [ 0.592228] vdd-pex-1v0: 1050 mV [ 0.592916] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.593467] max77620-ldo3: at 3100 mV [ 0.596234] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.596788] max77620-ldo5: at 3100 mV [ 0.600230] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 1800 mV [ 0.604251] avdd-1v05-pll: 1050 mV [ 0.608225] avdd-io-hdmi-dp: 1050 mV [ 0.610666] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.610998] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.611318] max77620 4-003c: max77620 probe successful [ 0.614008] media: Linux media interface: v0.10 [ 0.614088] Linux video capture interface: v2.00 [ 0.615060] pps_core: LinuxPPS API ver. 1 registered [ 0.615089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.615135] PTP clock support registered [ 0.618386] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.619207] Advanced Linux Sound Architecture Driver Initialized. [ 0.619881] Bluetooth: Core ver 2.22 [ 0.619948] NET: Registered protocol family 31 [ 0.619968] Bluetooth: HCI device and connection manager initialized [ 0.619997] Bluetooth: HCI socket layer initialized [ 0.620018] Bluetooth: L2CAP socket layer initialized [ 0.620057] Bluetooth: SCO socket layer initialized [ 0.621772] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.621810] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.621868] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.621896] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.625487] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.626804] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.626897] vdd-3v3-sys: 3300 mV [ 0.627188] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.629152] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.629630] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.629710] vdd-3v3-sd: 3300 mV [ 0.630566] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.630627] avdd-io-edp-1v05: 1050 mV [ 0.631065] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.631120] vdd-usb-hub-en: 5000 mV [ 0.632549] camchar: rtcpu character device driver loaded [ 0.633426] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:2 [ 0.634765] clocksource: Switched to clocksource arch_sys_counter [ 0.675661] VFS: Disk quotas dquot_6.6.0 [ 0.675837] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.676328] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676730] dma_declare_coherent_resizable_cma_memory:323: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.676782] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.676997] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.677021] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.677049] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.677100] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.677128] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.677162] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.677185] nvmap_page_pool_init: Total RAM pages: 1011904 [ 0.677204] nvmap_page_pool_init: nvmap page pool size: 126488 pages (494 MB) [ 0.677421] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677771] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.678750] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.686824] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.687313] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.687688] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.687991] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.688196] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.688503] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.688526] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.688965] NET: Registered protocol family 2 [ 0.689946] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.690184] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.690694] TCP: Hash tables configured (established 32768 bind 32768) [ 0.690925] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691031] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691472] NET: Registered protocol family 1 [ 0.692246] RPC: Registered named UNIX socket transport module. [ 0.692276] RPC: Registered udp transport module. [ 0.692294] RPC: Registered tcp transport module. [ 0.692312] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.692339] PCI: CLS 0 bytes, default 64 [ 0.702218] host1x 50000000.host1x: initialized [ 0.703991] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.707180] audit: initializing netlink subsys (disabled) [ 0.707320] audit: type=2000 audit(0.555:1): initialized [ 0.708090] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.717977] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.719519] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.720354] 9p: Installing v9fs 9p2000 file system support [ 0.723600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.723770] io scheduler noop registered [ 0.724073] io scheduler cfq registered (default) [ 0.726714] gic 702f9000.agic: GIC IRQ controller registered [ 0.729562] iommu: Adding device 702ef000.adsp to group 32 [ 0.737451] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 0.737605] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.738193] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x722740f [ 0.738227] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.740081] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.740225] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.740341] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.740552] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-1, function = pcie-x4 [ 0.740668] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-2, function = pcie-x4 [ 0.740776] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-3, function = pcie-x4 [ 0.740885] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-4, function = pcie-x4 [ 0.740995] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-5, function = xusb [ 0.741105] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-6, function = xusb [ 0.747198] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.748877] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.750634] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.751943] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.752303] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.754191] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.754440] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.754918] Adding domain tsec-pd to PM domain host1x-pd [ 0.758035] tsec 54500000.tsec: initialized [ 0.759444] tsec 54100000.tsecb: initialized [ 0.760184] Adding domain nvdec-pd to PM domain host1x-pd [ 0.763662] nvdec 54480000.nvdec: initialized [ 0.764762] Adding domain vic03-pd to PM domain host1x-pd [ 0.764967] Adding domain msenc-pd to PM domain host1x-pd [ 0.765143] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.769329] falcon 54340000.vic: initialized [ 0.770581] falcon 544c0000.nvenc: initialized [ 0.772012] falcon 54380000.nvjpg: initialized [ 0.776399] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 0.776473] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.776522] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.776560] tegradc tegradc.1: disp0 connected to head1->/host1x/sor [ 0.776663] Node path /chosen/display-board not found [ 0.776682] display board info: id 0x0, fab 0x0 [ 0.776780] tegradc tegradc.1: No lt-data, using default setting [ 0.776816] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.776823] tegradc tegradc.1: No hpd-gpio in DT [ 0.776854] tegradc tegradc.1: DT parsed successfully [ 0.776857] tegra_cec 70015000.tegra_cec: probed [ 0.776941] tegradc tegradc.1: Display dc.ffffff800ae80000 registered with id=0 [ 0.778436] tegradc tegradc.1: dpd enable lookup fail:-19 [ 0.779696] tegradc tegradc.1: probed [ 0.780111] tegradc tegradc.1: fb registered [ 0.784582] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.790396] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 0.791206] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 0.791239] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.791578] kfuse 7000fc00.kfuse: initialized [ 0.792498] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.792803] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 0.792835] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.792857] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 0.792879] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 0.792907] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.792962] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 0.793110] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.793402] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.793407] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.793621] pci 0000:01:00.0: [1055:7431] type 00 class 0x020000 [ 0.793665] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 0.793694] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x000000ff 64bit] [ 0.793708] tegradc tegradc.1: nominal-pclk:25200000 parent:25200000 div:1.0 pclk:25200000 24948000~27468000 [ 0.793722] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit] [ 0.793908] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.794638] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.794682] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.795116] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.795967] vdd-gpu: applied init 1000000uV constraint [ 0.795993] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.796351] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.800017] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 0.800038] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.800127] No Device Node present for smmu client: serial8250 !! [ 0.800153] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.800216] iommu: Adding device serial8250 to group 34 [ 0.800500] tegradc tegradc.1: dp: irq event received, ignoring [ 0.802529] console [ttyS0] disabled [ 0.802621] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 0.803723] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 0.803869] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.803925] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 0.803939] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 0.803963] pci 0000:01:00.0: BAR 2: assigned [mem 0x13002000-0x130020ff 64bit] [ 0.803986] pci 0000:01:00.0: BAR 4: assigned [mem 0x13002100-0x130021ff 64bit] [ 0.804010] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.804018] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 0.804446] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.804451] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.804459] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 0.804586] aer 0000:00:01.0:pcie002: service driver aer loaded [ 0.808556] dp lt: state 0 (Reset), pending_lt_evt 1 [ 0.808560] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 0.808564] dp lt: state 0 (Reset), pending_lt_evt 0 [ 0.809765] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 0.809909] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 0.809913] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 0.810149] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 0.810158] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 0.810165] dp lt: tx_pu: 0x20 [ 0.810772] dp lt: CR done [ 0.810775] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 0.810780] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 0.812726] dp lt: CE done [ 0.812731] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 0.812835] tegradc tegradc.1: Link compression not supported by the panel [ 0.815645] tegradc tegradc.1: nominal-pclk:157100000 parent:157098632 div:1.0 pclk:157098632 155529000~171239000 [ 1.782796] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 1.782801] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 3.704545] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 3.704549] console [ttyS0] enabled [ 3.704552] tegradc tegradc.1: blank - powerdown [ 3.715865] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.716169] serial-tegra 70006200.serial: RX in PIO mode [ 3.716252] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.717191] [drm] Initialized [ 3.734840] brd: module loaded [ 3.740016] loop: module loaded [ 3.740124] tegra_profiler: version: 1.143, samples/io: 48/28 [ 3.740241] tegra_profiler: auth: init [ 3.741610] THERMAL EST: found 2 subdevs [ 3.741618] THERMAL EST num_resources: 0 [ 3.741624] [THERMAL EST subdev 0] [ 3.741630] [THERMAL EST subdev 1] [ 3.742100] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.742104] THERMAL EST: thz register success. [ 3.742269] THERMAL EST: end of probe, return err: 0 [ 3.743555] sd: No Scsi addr parsed to reserve index [ 3.743591] hisi_sas: driver version v1.6 [ 3.747371] tegra-qspi 70410000.spi: Prod settings list not found [ 3.748604] qspi_mtd spi32766.0: unrecognized JEDEC id 000000 [ 3.749780] libphy: Fixed MDIO Bus: probed [ 3.750414] microchipphy_genl_init() [ 3.750584] tun: Universal TUN/TAP device driver, 1.6 [ 3.750586] tun: (C) 1999-2004 Max Krasnyansky [ 3.751460] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 3.751465] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 3.751472] dp lt: state 0 (Reset), pending_lt_evt 0 [ 3.751477] dp lt: link training force disable [ 3.751481] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 3.751697] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.751700] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.751768] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.751771] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.751947] sky2: driver version 1.30 [ 3.752406] lan743x 0000:01:00.0: enabling device (0000 -> 0002) [ 3.752429] lan743x 0000:01:00.0 (unnamed net_device) (uninitialized): PCI: Vendor ID = 0x1055, Device ID = 0x7431 [ 3.752508] lan743x 0000:01:00.0 (unnamed net_device) (uninitialized): ID_REV = 0x74310011, FPGA_REV = 0.0 [ 3.771928] tegradc tegradc.1: IRQ when DC not powered! [ 3.772189] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 3.807793] tegradc tegradc.1: unblank [ 3.828319] tegradc tegradc.1: updating CMU cmu_dirty=1 [ 3.840008] tegradc tegradc.1: nominal-pclk:157100000 parent:157098632 div:1.0 pclk:157098632 155529000~171239000 [ 3.846290] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 3.846443] tegradc tegradc.1: dp: irq event received, ignoring [ 3.850119] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 3.850799] lan743x 0000:01:00.0 (unnamed net_device) (uninitialized): MAC address set to aa:bb:cc:dd:ee:ff [ 3.854806] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 3.854810] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 3.854814] dp lt: state 0 (Reset), pending_lt_evt 0 [ 3.856012] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 3.856154] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 3.856158] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 3.856395] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 3.856404] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 3.856410] dp lt: tx_pu: 0x20 [ 3.857097] dp lt: CR done [ 3.857100] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 3.857105] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 3.859062] dp lt: CE done [ 3.859066] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 3.859161] tegradc tegradc.1: Link compression not supported by the panel [ 3.875803] tegradc tegradc.1: sync windows ret = 246 [ 4.003200] libphy: lan743x-mdiobus: probed [ 4.005056] PPP generic driver version 2.4.2 [ 4.005772] PPP BSD Compression module registered [ 4.005777] PPP Deflate Compression module registered [ 4.005824] PPP MPPE Compression module registered [ 4.005832] NET: Registered protocol family 24 [ 4.005923] usbcore: registered new interface driver r8152 [ 4.005978] usbcore: registered new interface driver asix [ 4.006087] usbcore: registered new interface driver ax88179_178a [ 4.006132] usbcore: registered new interface driver cdc_ether [ 4.006170] usbcore: registered new interface driver net1080 [ 4.006209] usbcore: registered new interface driver cdc_subset [ 4.006247] usbcore: registered new interface driver zaurus [ 4.006359] usbcore: registered new interface driver cdc_ncm [ 4.006574] VFIO - User Level meta-driver version: 0.3 [ 4.008149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.008181] ehci-pci: EHCI PCI platform driver [ 4.008231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.008243] ohci-pci: OHCI PCI platform driver [ 4.008292] ohci-platform: OHCI generic platform driver [ 4.011184] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 4.011823] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 4.013009] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f944b800 id [ 4.014801] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 4.014859] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.014887] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 4.015689] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 4.015758] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 4.015975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.015981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.015986] usb usb1: Product: xHCI Host Controller [ 4.015990] usb usb1: Manufacturer: Linux 4.9.201-l4t-r32.5-g8f97b4ec4c5b-dirty xhci-hcd [ 4.015993] usb usb1: SerialNumber: 70090000.xusb [ 4.016310] usbcore: registered new interface driver uas [ 4.016629] hub 1-0:1.0: USB hub found [ 4.016670] hub 1-0:1.0: 5 ports detected [ 4.017274] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.017285] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 4.017366] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.017536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.017540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.017544] usb usb2: Product: xHCI Host Controller [ 4.017547] usb usb2: Manufacturer: Linux 4.9.201-l4t-r32.5-g8f97b4ec4c5b-dirty xhci-hcd [ 4.017551] usb usb2: SerialNumber: 70090000.xusb [ 4.018062] hub 2-0:1.0: USB hub found [ 4.018092] hub 2-0:1.0: 4 ports detected [ 4.018637] usbcore: registered new interface driver usb-storage [ 4.019033] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 4.019038] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 4.019258] usbcore: registered new interface driver usbserial [ 4.023129] tegra-xudc-new 700d0000.xudc: device count: 1 [ 4.024873] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 4.024887] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 4.024923] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.025192] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.025916] g_serial gadget: Gadget Serial v2.4 [ 4.025920] g_serial gadget: g_serial ready [ 4.025929] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.026541] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.026566] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.026591] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.026844] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.026866] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.027844] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.027854] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.028092] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.028359] mousedev: PS/2 mouse device common for all mice [ 4.028477] usbcore: registered new interface driver xpad [ 4.114920] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 4.114987] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 4.115257] usb usb2: usb_suspend_both: status 0 [ 4.147968] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.150386] rtc rtc1: alarm rtc device [ 4.150402] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 4.150432] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 4.151056] i2c /dev entries driver [ 4.153352] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.155937] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 4.155943] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 4.156419] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.156438] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 4.156449] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 4.156585] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.156595] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 4.156601] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 4.156748] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.156759] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 4.156764] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 4.156977] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 4.157878] tegra_aotag tegra-aotag: Registering sensor 0 [ 4.157936] tegra_aotag tegra-aotag: Invalid temp readout [ 4.157962] tegra_aotag tegra-aotag: Invalid temp readout [ 4.157980] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 4.157988] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 4.159186] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.159208] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 4.159430] tegra_aotag tegra-aotag: Invalid temp readout [ 4.159463] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 4.159989] parse_throttle_dt_data: Num cap clks = 6 [ 4.159994] parse_throttle_dt_data: clk=cclk_g type=2 [ 4.160007] parse_throttle_dt_data: clk=gpu type=4 [ 4.160035] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 4.160054] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 4.160075] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 4.160079] parse_throttle_dt_data: clk=emc type=3 [ 4.160577] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.160701] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.160843] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.161659] FAN dev name: pwm-fan [ 4.161746] FAN:gpio request success. [ 4.161830] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 4.162152] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.162329] pwm_fan_driver pwm-fan: fan tach request irq success [ 4.162339] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.162422] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.162426] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 4.162431] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 4.162436] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 4.162440] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.162444] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.162448] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.162452] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.162456] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.162460] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.164019] softdog-platform soft_watchdog: Software Watchdog Timer: initialized [ 4.164728] device-mapper: uevent: version 1.0.3 [ 4.165192] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.169806] tegra210-cpufreq cpufreq: probe()...completed [ 4.171149] sdhci: Secure Digital Host Controller Interface driver [ 4.171151] sdhci: Copyright(c) Pierre Ossman [ 4.171154] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.171754] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 4.177559] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 4.185411] tegra-se 70012000.se: tegra_se_probe: complete [ 4.186146] hidraw: raw HID events driver (C) Jiri Kosina [ 4.188043] usbcore: registered new interface driver usbhid [ 4.188046] usbhid: USB HID core driver [ 4.188887] tegra-vii2c 546c0000.i2c: arb lost in communicate to add 0x40 [ 4.188969] tegra-vii2c 546c0000.i2c: Un-recovered Arb lost [ 4.188989] ina3221x 6-0040: ina3221 reset failure status: 0xfffffff5 [ 4.189201] ina3221x: probe of 6-0040 failed with error -11 [ 4.190732] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 4.191228] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 4.194383] nvpmodel: initialized successfully [ 4.196532] usbcore: registered new interface driver snd-usb-audio [ 4.196649] No Device Node present for smmu client: snd-soc-dummy !! [ 4.196658] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 4.196696] iommu: Adding device snd-soc-dummy to group 35 [ 4.205621] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 4.214968] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 4.229157] OPE platform probe [ 4.229338] OPE platform probe successful [ 4.229634] OPE platform probe [ 4.229752] OPE platform probe successful [ 4.231015] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 4.256922] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.257131] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.257325] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.257515] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.257707] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.257888] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.258082] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.258281] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.258470] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.258676] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.273238] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.277949] u32 classifier [ 4.277953] Actions configured [ 4.278083] Initializing XFRM netlink socket [ 4.278367] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 4.278711] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 4.279097] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 4.279236] NET: Registered protocol family 10 [ 4.280278] NET: Registered protocol family 17 [ 4.280302] NET: Registered protocol family 15 [ 4.280404] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.281055] Bluetooth: RFCOMM socket layer initialized [ 4.281081] Bluetooth: RFCOMM ver 1.11 [ 4.281089] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.281096] Bluetooth: HIDP socket layer initialized [ 4.281122] 9pnet: Installing 9P2000 support [ 4.281224] Key type dns_resolver registered [ 4.283354] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 4.286324] Registered cp15_barrier emulation handler [ 4.286736] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 [ 4.291885] Registered setend emulation handler [ 4.293608] registered taskstats version 1 [ 4.295009] Adding domain ve2-pd to PM domain host1x-pd [ 4.295314] Adding domain ve-pd to PM domain host1x-pd [ 4.346796] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.367577] usb 1-2: New USB device found, idVendor=0424, idProduct=2514 [ 4.367582] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.369148] hub 1-2:1.0: USB hub found [ 4.369243] hub 1-2:1.0: 4 ports detected [ 4.482396] mmc1: hw tuning done ... [ 4.488957] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.498782] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 4.498820] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 4.518774] usb 1-2: usb_suspend_both: status 0 [ 4.523473] usb 1-3: New USB device found, idVendor=0424, idProduct=2514 [ 4.523477] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.524539] hub 1-3:1.0: USB hub found [ 4.524627] hub 1-3:1.0: 4 ports detected [ 4.654775] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 2 [ 4.674773] usb 1-3: usb_suspend_both: status 0 [ 4.674862] usb usb1: usb_suspend_both: status 0 [ 5.470580] ************************************************************** dc1 [ 5.477838] tegradc tegradc.1: DC_CMD_DISPLAY_COMMAND_OPTION0 031 00000000 [ 5.477849] tegradc tegradc.1: DC_CMD_DISPLAY_COMMAND 032 00000020 [ 5.477859] tegradc tegradc.1: DC_CMD_SIGNAL_RAISE 033 00000100 [ 5.477869] tegradc tegradc.1: DC_CMD_INT_STATUS 037 00000000 [ 5.477878] tegradc tegradc.1: DC_CMD_INT_MASK 038 00000024 [ 5.477887] tegradc tegradc.1: DC_CMD_INT_ENABLE 039 03800726 [ 5.477897] tegradc tegradc.1: DC_CMD_INT_TYPE 03a 00004700 [ 5.477906] tegradc tegradc.1: DC_CMD_INT_POLARITY 03b 0381c700 [ 5.477916] tegradc tegradc.1: DC_CMD_SIGNAL_RAISE1 03c 00020017 [ 5.477925] tegradc tegradc.1: DC_CMD_SIGNAL_RAISE2 03d 000c061e [ 5.477935] tegradc tegradc.1: DC_CMD_SIGNAL_RAISE3 03e 0004010b [ 5.477945] tegradc tegradc.1: DC_CMD_STATE_ACCESS 040 00000005 [ 5.477954] tegradc tegradc.1: DC_CMD_STATE_CONTROL 041 00000000 [ 5.477964] tegradc tegradc.1: DC_CMD_DISPLAY_WINDOW_HEADER 042 00000040 [ 5.477973] tegradc tegradc.1: DC_CMD_REG_ACT_CONTROL 043 00000000 [ 5.477983] tegradc tegradc.1: DC_DISP_DISP_SIGNAL_OPTIONS0 400 00080000 [ 5.477992] tegradc tegradc.1: DC_DISP_DISP_SIGNAL_OPTIONS1 401 00000000 [ 5.478002] tegradc tegradc.1: DC_DISP_DISP_WIN_OPTIONS 402 02000000 [ 5.478011] tegradc tegradc.1: DC_DISP_MEM_HIGH_PRIORITY 403 00202020 [ 5.478021] tegradc tegradc.1: DC_DISP_MEM_HIGH_PRIORITY_TIMER 404 00010101 [ 5.478030] tegradc tegradc.1: DC_DISP_DISP_TIMING_OPTIONS 405 00000001 [ 5.478040] tegradc tegradc.1: DC_DISP_REF_TO_SYNC 406 00010001 [ 5.478050] tegradc tegradc.1: DC_DISP_SYNC_WIDTH 407 00040050 [ 5.478059] tegradc tegradc.1: DC_DISP_BACK_PORCH 408 00030050 [ 5.478068] tegradc tegradc.1: DC_DISP_DISP_ACTIVE 409 04b00780 [ 5.478078] tegradc tegradc.1: DC_DISP_FRONT_PORCH 40a 00050050 [ 5.478087] tegradc tegradc.1: DC_DISP_H_PULSE0_CONTROL 40b 00000480 [ 5.478097] tegradc tegradc.1: DC_DISP_H_PULSE0_POSITION_A 40c 18f01d00 [ 5.478106] tegradc tegradc.1: DC_DISP_H_PULSE0_POSITION_B 40d 12080965 [ 5.478115] tegradc tegradc.1: DC_DISP_H_PULSE0_POSITION_C 40e 1a080cc0 [ 5.478124] tegradc tegradc.1: DC_DISP_H_PULSE0_POSITION_D 40f 0a3d00a0 [ 5.478134] tegradc tegradc.1: DC_DISP_H_PULSE1_CONTROL 410 00000800 [ 5.478143] tegradc tegradc.1: DC_DISP_H_PULSE1_POSITION_A 411 090904cd [ 5.478152] tegradc tegradc.1: DC_DISP_H_PULSE1_POSITION_B 412 04151310 [ 5.478162] tegradc tegradc.1: DC_DISP_H_PULSE1_POSITION_C 413 04990410 [ 5.478171] tegradc tegradc.1: DC_DISP_H_PULSE1_POSITION_D 414 0800193e [ 5.478180] tegradc tegradc.1: DC_DISP_H_PULSE2_CONTROL 415 00000390 [ 5.478189] tegradc tegradc.1: DC_DISP_H_PULSE2_POSITION_A 416 00220fd9 [ 5.478198] tegradc tegradc.1: DC_DISP_H_PULSE2_POSITION_B 417 10bd1e2d [ 5.478208] tegradc tegradc.1: DC_DISP_H_PULSE2_POSITION_C 418 1643072f [ 5.478217] tegradc tegradc.1: DC_DISP_H_PULSE2_POSITION_D 419 01c11bc9 [ 5.478226] tegradc tegradc.1: DC_DISP_V_PULSE0_CONTROL 41a 00000e00 [ 5.478235] tegradc tegradc.1: DC_DISP_V_PULSE0_POSITION_A 41b 1c800ac0 [ 5.478244] tegradc tegradc.1: DC_DISP_V_PULSE0_POSITION_B 41c 144108b9 [ 5.478254] tegradc tegradc.1: DC_DISP_V_PULSE0_POSITION_C 41d 0f0c032e [ 5.478263] tegradc tegradc.1: DC_DISP_V_PULSE1_CONTROL 41e 00000200 [ 5.478272] tegradc tegradc.1: DC_DISP_V_PULSE1_POSITION_A 41f 15080fa3 [ 5.478281] tegradc tegradc.1: DC_DISP_V_PULSE1_POSITION_B 420 04b81071 [ 5.478290] tegradc tegradc.1: DC_DISP_V_PULSE1_POSITION_C 421 10011173 [ 5.478300] tegradc tegradc.1: DC_DISP_V_PULSE2_CONTROL 422 00000100 [ 5.478309] tegradc tegradc.1: DC_DISP_V_PULSE2_POSITION_A 423 04ba04b9 [ 5.478318] tegradc tegradc.1: DC_DISP_V_PULSE3_CONTROL 424 00000100 [ 5.478327] tegradc tegradc.1: DC_DISP_V_PULSE3_POSITION_A 425 19901905 [ 5.478336] tegradc tegradc.1: DC_DISP_M0_CONTROL 426 07001fa2 [ 5.478346] tegradc tegradc.1: DC_DISP_M1_CONTROL 427 04540d11 [ 5.478355] tegradc tegradc.1: DC_DISP_DI_CONTROL 428 002e00c2 [ 5.478364] tegradc tegradc.1: DC_DISP_PP_CONTROL 429 0000e27e [ 5.478373] tegradc tegradc.1: DC_DISP_PP_SELECT_A 42a 20483113 [ 5.478382] tegradc tegradc.1: DC_DISP_PP_SELECT_B 42b 36282a1c [ 5.478392] tegradc tegradc.1: DC_DISP_PP_SELECT_C 42c 85d2a143 [ 5.478401] tegradc tegradc.1: DC_DISP_PP_SELECT_D 42d 509cf429 [ 5.478410] tegradc tegradc.1: DC_DISP_DISP_CLOCK_CONTROL 42e 00000000 [ 5.478419] tegradc tegradc.1: DC_DISP_DISP_INTERFACE_CONTROL 42f 00000000 [ 5.478428] tegradc tegradc.1: DC_DISP_DISP_COLOR_CONTROL 430 00100008 [ 5.478438] tegradc tegradc.1: DC_DISP_SHIFT_CLOCK_OPTIONS 431 00000000 [ 5.478447] tegradc tegradc.1: DC_DISP_DATA_ENABLE_OPTIONS 432 00000005 [ 5.478457] tegradc tegradc.1: DC_DISP_SERIAL_INTERFACE_OPTIONS 433 00000000 [ 5.478466] tegradc tegradc.1: DC_DISP_LCD_SPI_OPTIONS 434 00000000 [ 5.478475] tegradc tegradc.1: DC_DISP_COLOR_KEY0_LOWER 436 00000000 [ 5.478484] tegradc tegradc.1: DC_DISP_COLOR_KEY0_UPPER 437 00000000 [ 5.478493] tegradc tegradc.1: DC_DISP_COLOR_KEY1_LOWER 438 00000000 [ 5.478503] tegradc tegradc.1: DC_DISP_COLOR_KEY1_UPPER 439 00000000 [ 5.478512] tegradc tegradc.1: DC_DISP_CURSOR_FOREGROUND 43c 00ffffff [ 5.478521] tegradc tegradc.1: DC_DISP_CURSOR_BACKGROUND 43d 00000000 [ 5.478530] tegradc tegradc.1: DC_DISP_CURSOR_START_ADDR 43e 00000000 [ 5.478539] tegradc tegradc.1: DC_DISP_CURSOR_START_ADDR_NS 43f 00000000 [ 5.478549] tegradc tegradc.1: DC_DISP_CURSOR_START_ADDR_HI 4ec 00000000 [ 5.478558] tegradc tegradc.1: DC_DISP_CURSOR_START_ADDR_HI_NS 4ed 00000000 [ 5.478567] tegradc tegradc.1: DC_DISP_CURSOR_POSITION 440 00000000 [ 5.478576] tegradc tegradc.1: DC_DISP_CURSOR_POSITION_NS 441 00000000 [ 5.478586] tegradc tegradc.1: DC_DISP_INIT_SEQ_CONTROL 442 00000070 [ 5.478595] tegradc tegradc.1: DC_DISP_SPI_INIT_SEQ_DATA_A 443 30228982 [ 5.478604] tegradc tegradc.1: DC_DISP_SPI_INIT_SEQ_DATA_B 444 404b02f8 [ 5.478613] tegradc tegradc.1: DC_DISP_SPI_INIT_SEQ_DATA_C 445 4088e893 [ 5.478623] tegradc tegradc.1: DC_DISP_SPI_INIT_SEQ_DATA_D 446 42aa8899 [ 5.478632] tegradc tegradc.1: DC_DISP_DC_MCCIF_FIFOCTRL 480 00000000 [ 5.478641] tegradc tegradc.1: DC_DISP_MCCIF_DISPLAY0A_HYST 481 cf401f1f [ 5.478651] tegradc tegradc.1: DC_DISP_MCCIF_DISPLAY0B_HYST 482 cf401f1f [ 5.478660] tegradc tegradc.1: DC_DISP_MCCIF_DISPLAY0C_HYST 483 cf401f1f [ 5.478669] tegradc tegradc.1: DC_DISP_DAC_CRT_CTRL 4c0 00000000 [ 5.478678] tegradc tegradc.1: DC_DISP_DISP_MISC_CONTROL 4c1 00000002 [ 5.478687] tegradc tegradc.1: DC_DISP_INTERLACE_CONTROL 4e5 00000000 [ 5.478697] tegradc tegradc.1: DC_DISP_INTERLACE_FIELD2_REF_TO_SYNC 4e6 11230449 [ 5.478706] tegradc tegradc.1: DC_DISP_INTERLACE_FIELD2_SYNC_WIDTH 4e7 084e0c12 [ 5.478716] tegradc tegradc.1: DC_DISP_INTERLACE_FIELD2_BACK_PORCH 4e8 17000534 [ 5.478725] tegradc tegradc.1: DC_DISP_INTERLACE_FIELD2_FRONT_PORCH 4e9 02ae0646 [ 5.478735] tegradc tegradc.1: DC_DISP_INTERLACE_FIELD2_DISP_ACTIVE 4ea 0a7302bc [ 5.478744] tegradc tegradc.1: DC_CMD_DISPLAY_POWER_CONTROL 036 00050155 [ 5.478768] tegradc tegradc.1: DC_COM_PIN_OUTPUT_ENABLE2 304 00510104 [ 5.478777] tegradc tegradc.1: DC_COM_PIN_OUTPUT_POLARITY2 308 00000000 [ 5.478786] tegradc tegradc.1: DC_COM_PIN_OUTPUT_DATA2 30c 00000000 [ 5.478796] tegradc tegradc.1: DC_COM_PIN_INPUT_ENABLE2 310 00000000 [ 5.478805] tegradc tegradc.1: DC_COM_PIN_OUTPUT_SELECT5 319 00000000 [ 5.478814] tegradc tegradc.1: DC_DISP_DISP_SIGNAL_OPTIONS0 400 00080000 [ 5.478823] tegradc tegradc.1: DC_DISP_M1_CONTROL 427 04540d11 [ 5.478833] tegradc tegradc.1: DC_COM_PM1_CONTROL 31e 000f1860 [ 5.478842] tegradc tegradc.1: DC_COM_PM1_DUTY_CYCLE 31f 0000010e [ 5.478851] tegradc tegradc.1: DC_DISP_SD_CONTROL 4c2 00004000 [ 5.478860] tegradc tegradc.1: DC_COM_CMU_CSC_KRR 32a 00000100 [ 5.478869] tegradc tegradc.1: DC_COM_CMU_CSC_KGR 32b 00000000 [ 5.478879] tegradc tegradc.1: DC_COM_CMU_CSC_KBR 32c 00000000 [ 5.478889] tegradc tegradc.1: DC_COM_CMU_CSC_KRG 32d 00000000 [ 5.478898] tegradc tegradc.1: DC_COM_CMU_CSC_KGG 32e 00000100 [ 5.478907] tegradc tegradc.1: DC_COM_CMU_CSC_KBG 32f 00000000 [ 5.478916] tegradc tegradc.1: DC_COM_CMU_CSC_KRB 330 00000000 [ 5.478926] tegradc tegradc.1: DC_COM_CMU_CSC_KGB 331 00000000 [ 5.478935] tegradc tegradc.1: DC_COM_CMU_CSC_KBB 332 00000100 [ 5.478939] tegradc tegradc.1: [ 5.478942] tegradc tegradc.1: WINDOW A: [ 5.478956] tegradc tegradc.1: DC_CMD_DISPLAY_WINDOW_HEADER 042 00000010 [ 5.478965] tegradc tegradc.1: DC_WIN_WIN_OPTIONS 700 40000000 [ 5.478975] tegradc tegradc.1: DC_WIN_BYTE_SWAP 701 00000000 [ 5.478984] tegradc tegradc.1: DC_WIN_BUFFER_CONTROL 702 00000000 [ 5.478993] tegradc tegradc.1: DC_WIN_COLOR_DEPTH 703 0000000c [ 5.479002] tegradc tegradc.1: DC_WIN_POSITION 704 00000000 [ 5.479011] tegradc tegradc.1: DC_WIN_SIZE 705 04b00780 [ 5.479020] tegradc tegradc.1: DC_WIN_PRESCALED_SIZE 706 04b01e00 [ 5.479030] tegradc tegradc.1: DC_WIN_H_INITIAL_DDA 707 00000000 [ 5.479039] tegradc tegradc.1: DC_WIN_V_INITIAL_DDA 708 00000000 [ 5.479049] tegradc tegradc.1: DC_WIN_DDA_INCREMENT 709 10001000 [ 5.479059] tegradc tegradc.1: DC_WIN_LINE_STRIDE 70a 00001e00 [ 5.479068] tegradc tegradc.1: DC_WIN_BLEND_NOKEY 70f 00000000 [ 5.479077] tegradc tegradc.1: DC_WIN_BLEND_1WIN 710 00000000 [ 5.479086] tegradc tegradc.1: DC_WIN_BLEND_2WIN_X 711 00000000 [ 5.479095] tegradc tegradc.1: DC_WIN_BLEND_2WIN_Y 712 00000000 [ 5.479105] tegradc tegradc.1: DC_WIN_BLEND_3WIN_XY 713 00000000 [ 5.479114] tegradc tegradc.1: DC_WIN_GLOBAL_ALPHA 715 00000000 [ 5.479123] tegradc tegradc.1: DC_WINBUF_BLEND_LAYER_CONTROL 716 010000ff [ 5.479132] tegradc tegradc.1: DC_WINBUF_START_ADDR 800 f8000000 [ 5.479141] tegradc tegradc.1: DC_WINBUF_START_ADDR_U 802 563d849f [ 5.479151] tegradc tegradc.1: DC_WINBUF_START_ADDR_V 804 00048902 [ 5.479160] tegradc tegradc.1: DC_WINBUF_ADDR_H_OFFSET 806 00000000 [ 5.479169] tegradc tegradc.1: DC_WINBUF_ADDR_V_OFFSET 808 00000000 [ 5.479179] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI 80d 00000000 [ 5.479188] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI_U 80f 00000000 [ 5.479197] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI_V 811 00000000 [ 5.479206] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2 813 40287316 [ 5.479215] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_U 815 489eea9c [ 5.479224] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_V 817 14499b85 [ 5.479234] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI 819 00000000 [ 5.479243] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI_U 81b 00000000 [ 5.479252] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI_V 81d 00000000 [ 5.479261] tegradc tegradc.1: DC_WINBUF_ADDR_H_OFFSET_FIELD2 81f 220a61aa [ 5.479271] tegradc tegradc.1: DC_WINBUF_ADDR_V_OFFSET_FIELD2 821 83892e81 [ 5.479280] tegradc tegradc.1: DC_WINBUF_UFLOW_STATUS 80a 00000000 [ 5.479289] tegradc tegradc.1: DC_WIN_CSC_YOF 611 000000f0 [ 5.479298] tegradc tegradc.1: DC_WIN_CSC_KYRGB 612 0000012a [ 5.479307] tegradc tegradc.1: DC_WIN_CSC_KUR 613 00000000 [ 5.479317] tegradc tegradc.1: DC_WIN_CSC_KVR 614 00000198 [ 5.479326] tegradc tegradc.1: DC_WIN_CSC_KUG 615 0000039b [ 5.479335] tegradc tegradc.1: DC_WIN_CSC_KVG 616 0000032f [ 5.479345] tegradc tegradc.1: DC_WIN_CSC_KUB 617 00000204 [ 5.479354] tegradc tegradc.1: DC_WIN_CSC_KVB 618 00000000 [ 5.479363] tegradc tegradc.1: DC_WINBUF_CDE_CONTROL 82f 00000000 [ 5.479372] tegradc tegradc.1: DC_WINBUF_CDE_COMPTAG_BASE_0 830 00000000 [ 5.479381] tegradc tegradc.1: DC_WINBUF_CDE_COMPTAG_BASEHI_0 832 00000000 [ 5.479391] tegradc tegradc.1: DC_WINBUF_CDE_ZBC_COLOR_0 834 00000000 [ 5.479400] tegradc tegradc.1: DC_WINBUF_CDE_SURFACE_OFFSET_0 835 00000000 [ 5.479409] tegradc tegradc.1: DC_WINBUF_CDE_CTB_ENTRY_0 836 00000002 [ 5.479418] tegradc tegradc.1: DC_WINBUF_CDE_CG_SW_OVR 837 00000001 [ 5.479427] tegradc tegradc.1: DC_WINBUF_CDE_PM_CONTROL 838 00000000 [ 5.479436] tegradc tegradc.1: DC_WINBUF_CDE_PM_COUNTER 839 00000000 [ 5.479439] tegradc tegradc.1: [ 5.479442] tegradc tegradc.1: WINDOW B: [ 5.479456] tegradc tegradc.1: DC_CMD_DISPLAY_WINDOW_HEADER 042 00000020 [ 5.479465] tegradc tegradc.1: DC_WIN_WIN_OPTIONS 700 00000000 [ 5.479474] tegradc tegradc.1: DC_WIN_BYTE_SWAP 701 00000000 [ 5.479483] tegradc tegradc.1: DC_WIN_BUFFER_CONTROL 702 00000000 [ 5.479492] tegradc tegradc.1: DC_WIN_COLOR_DEPTH 703 0000000c [ 5.479502] tegradc tegradc.1: DC_WIN_POSITION 704 02460178 [ 5.479511] tegradc tegradc.1: DC_WIN_SIZE 705 010207bc [ 5.479521] tegradc tegradc.1: DC_WIN_PRESCALED_SIZE 706 16b7129e [ 5.479530] tegradc tegradc.1: DC_WIN_H_INITIAL_DDA 707 00000000 [ 5.479539] tegradc tegradc.1: DC_WIN_V_INITIAL_DDA 708 00000000 [ 5.479548] tegradc tegradc.1: DC_WIN_DDA_INCREMENT 709 10001000 [ 5.479557] tegradc tegradc.1: DC_WIN_LINE_STRIDE 70a b8d901ed [ 5.479566] tegradc tegradc.1: DC_WIN_BLEND_NOKEY 70f 00000000 [ 5.479576] tegradc tegradc.1: DC_WIN_BLEND_1WIN 710 00000000 [ 5.479585] tegradc tegradc.1: DC_WIN_BLEND_2WIN_X 711 00000000 [ 5.479594] tegradc tegradc.1: DC_WIN_BLEND_2WIN_Y 712 00000000 [ 5.479603] tegradc tegradc.1: DC_WIN_BLEND_3WIN_XY 713 00000000 [ 5.479612] tegradc tegradc.1: DC_WIN_GLOBAL_ALPHA 715 00000000 [ 5.479621] tegradc tegradc.1: DC_WINBUF_BLEND_LAYER_CONTROL 716 010000ff [ 5.479632] tegradc tegradc.1: DC_WINBUF_START_ADDR 800 c4601483 [ 5.479641] tegradc tegradc.1: DC_WINBUF_START_ADDR_U 802 3918248a [ 5.479650] tegradc tegradc.1: DC_WINBUF_START_ADDR_V 804 9d0261c5 [ 5.479659] tegradc tegradc.1: DC_WINBUF_ADDR_H_OFFSET 806 b5406639 [ 5.479668] tegradc tegradc.1: DC_WINBUF_ADDR_V_OFFSET 808 40914126 [ 5.479677] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI 80d 00000000 [ 5.479687] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI_U 80f 00000000 [ 5.479696] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI_V 811 00000000 [ 5.479705] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2 813 220d0571 [ 5.479714] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_U 815 a1214026 [ 5.479723] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_V 817 90b32c52 [ 5.479733] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI 819 00000000 [ 5.479742] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI_U 81b 00000000 [ 5.479751] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI_V 81d 00000000 [ 5.479760] tegradc tegradc.1: DC_WINBUF_ADDR_H_OFFSET_FIELD2 81f 076356c0 [ 5.479769] tegradc tegradc.1: DC_WINBUF_ADDR_V_OFFSET_FIELD2 821 e8136923 [ 5.479779] tegradc tegradc.1: DC_WINBUF_UFLOW_STATUS 80a 00000000 [ 5.479788] tegradc tegradc.1: DC_WIN_CSC_YOF 611 000000f0 [ 5.479797] tegradc tegradc.1: DC_WIN_CSC_KYRGB 612 0000012a [ 5.479806] tegradc tegradc.1: DC_WIN_CSC_KUR 613 00000000 [ 5.479815] tegradc tegradc.1: DC_WIN_CSC_KVR 614 00000198 [ 5.479825] tegradc tegradc.1: DC_WIN_CSC_KUG 615 0000039b [ 5.479834] tegradc tegradc.1: DC_WIN_CSC_KVG 616 0000032f [ 5.479843] tegradc tegradc.1: DC_WIN_CSC_KUB 617 00000204 [ 5.479852] tegradc tegradc.1: DC_WIN_CSC_KVB 618 00000000 [ 5.479861] tegradc tegradc.1: DC_WINBUF_CDE_CONTROL 82f 00000000 [ 5.479871] tegradc tegradc.1: DC_WINBUF_CDE_COMPTAG_BASE_0 830 00000000 [ 5.479880] tegradc tegradc.1: DC_WINBUF_CDE_COMPTAG_BASEHI_0 832 00000000 [ 5.479889] tegradc tegradc.1: DC_WINBUF_CDE_ZBC_COLOR_0 834 00000000 [ 5.479898] tegradc tegradc.1: DC_WINBUF_CDE_SURFACE_OFFSET_0 835 00000000 [ 5.479907] tegradc tegradc.1: DC_WINBUF_CDE_CTB_ENTRY_0 836 00000002 [ 5.479917] tegradc tegradc.1: DC_WINBUF_CDE_CG_SW_OVR 837 00000001 [ 5.479926] tegradc tegradc.1: DC_WINBUF_CDE_PM_CONTROL 838 00000000 [ 5.479935] tegradc tegradc.1: DC_WINBUF_CDE_PM_COUNTER 839 00000000 [ 5.479938] tegradc tegradc.1: [ 5.479941] tegradc tegradc.1: WINDOW C: [ 5.479955] tegradc tegradc.1: DC_CMD_DISPLAY_WINDOW_HEADER 042 00000040 [ 5.479964] tegradc tegradc.1: DC_WIN_WIN_OPTIONS 700 00000000 [ 5.479973] tegradc tegradc.1: DC_WIN_BYTE_SWAP 701 00000000 [ 5.479982] tegradc tegradc.1: DC_WIN_BUFFER_CONTROL 702 00000000 [ 5.479992] tegradc tegradc.1: DC_WIN_COLOR_DEPTH 703 0000000c [ 5.480001] tegradc tegradc.1: DC_WIN_POSITION 704 1328170a [ 5.480010] tegradc tegradc.1: DC_WIN_SIZE 705 10c20152 [ 5.480019] tegradc tegradc.1: DC_WIN_PRESCALED_SIZE 706 0a991ed1 [ 5.480028] tegradc tegradc.1: DC_WIN_H_INITIAL_DDA 707 00000000 [ 5.480037] tegradc tegradc.1: DC_WIN_V_INITIAL_DDA 708 00000000 [ 5.480047] tegradc tegradc.1: DC_WIN_DDA_INCREMENT 709 10001000 [ 5.480056] tegradc tegradc.1: DC_WIN_LINE_STRIDE 70a cc833569 [ 5.480065] tegradc tegradc.1: DC_WIN_BLEND_NOKEY 70f 00000000 [ 5.480074] tegradc tegradc.1: DC_WIN_BLEND_1WIN 710 00000000 [ 5.480083] tegradc tegradc.1: DC_WIN_BLEND_2WIN_X 711 00000000 [ 5.480092] tegradc tegradc.1: DC_WIN_BLEND_2WIN_Y 712 00000000 [ 5.480102] tegradc tegradc.1: DC_WIN_BLEND_3WIN_XY 713 00000000 [ 5.480111] tegradc tegradc.1: DC_WIN_GLOBAL_ALPHA 715 00000000 [ 5.480120] tegradc tegradc.1: DC_WINBUF_BLEND_LAYER_CONTROL 716 010000ff [ 5.480129] tegradc tegradc.1: DC_WINBUF_START_ADDR 800 3624194c [ 5.480138] tegradc tegradc.1: DC_WINBUF_START_ADDR_U 802 6953142a [ 5.480147] tegradc tegradc.1: DC_WINBUF_START_ADDR_V 804 80228d54 [ 5.480157] tegradc tegradc.1: DC_WINBUF_ADDR_H_OFFSET 806 4da0e9b2 [ 5.480166] tegradc tegradc.1: DC_WINBUF_ADDR_V_OFFSET 808 04940914 [ 5.480175] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI 80d 00000000 [ 5.480184] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI_U 80f 00000000 [ 5.480193] tegradc tegradc.1: DC_WINBUF_START_ADDR_HI_V 811 00000000 [ 5.480202] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2 813 440231e6 [ 5.480212] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_U 815 14dd0a6e [ 5.480221] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_V 817 81020b2c [ 5.480231] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI 819 00000000 [ 5.480240] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI_U 81b 00000000 [ 5.480249] tegradc tegradc.1: DC_WINBUF_START_ADDR_FIELD2_HI_V 81d 00000000 [ 5.480258] tegradc tegradc.1: DC_WINBUF_ADDR_H_OFFSET_FIELD2 81f 60011477 [ 5.480267] tegradc tegradc.1: DC_WINBUF_ADDR_V_OFFSET_FIELD2 821 4010a2e4 [ 5.480276] tegradc tegradc.1: DC_WINBUF_UFLOW_STATUS 80a 00000000 [ 5.480286] tegradc tegradc.1: DC_WIN_CSC_YOF 611 000000f0 [ 5.480295] tegradc tegradc.1: DC_WIN_CSC_KYRGB 612 0000012a [ 5.480304] tegradc tegradc.1: DC_WIN_CSC_KUR 613 00000000 [ 5.480313] tegradc tegradc.1: DC_WIN_CSC_KVR 614 00000198 [ 5.480322] tegradc tegradc.1: DC_WIN_CSC_KUG 615 0000039b [ 5.480332] tegradc tegradc.1: DC_WIN_CSC_KVG 616 0000032f [ 5.480341] tegradc tegradc.1: DC_WIN_CSC_KUB 617 00000204 [ 5.480350] tegradc tegradc.1: DC_WIN_CSC_KVB 618 00000000 [ 5.480359] tegradc tegradc.1: DC_WINBUF_CDE_CONTROL 82f 00000000 [ 5.480368] tegradc tegradc.1: DC_WINBUF_CDE_COMPTAG_BASE_0 830 00000000 [ 5.480377] tegradc tegradc.1: DC_WINBUF_CDE_COMPTAG_BASEHI_0 832 00000000 [ 5.480386] tegradc tegradc.1: DC_WINBUF_CDE_ZBC_COLOR_0 834 00000000 [ 5.480396] tegradc tegradc.1: DC_WINBUF_CDE_SURFACE_OFFSET_0 835 00000000 [ 5.480405] tegradc tegradc.1: DC_WINBUF_CDE_CTB_ENTRY_0 836 00000002 [ 5.480414] tegradc tegradc.1: DC_WINBUF_CDE_CG_SW_OVR 837 00000001 [ 5.480423] tegradc tegradc.1: DC_WINBUF_CDE_PM_CONTROL 838 00000000 [ 5.480432] tegradc tegradc.1: DC_WINBUF_CDE_PM_COUNTER 839 00000000 [ 5.480444] ************************************************************** end [ 5.489535] isp 54600000.isp: initialized [ 5.495232] isp 54680000.isp: initialized [ 5.518734] last reset is due to software reset [ 5.523367] KERNEL: PMC reset status reg: 0x3 [ 5.532079] clk_cbus_recalc_rate: no gbus parent [ 5.536766] clk_cbus_round_rate: no gbus parent [ 5.541307] clk_cbus_round_rate: no gbus parent [ 5.545878] clk_cbus_recalc_rate: no gbus parent [ 5.550731] clk_cbus_recalc_rate: no gbus parent [ 5.555367] clk_cbus_round_rate: no gbus parent [ 5.559900] 35.961231] vdd-fan: disabling 0mclk_cbus_round_rate: no gbus [ 35.967686] vdd-usb-vbus: disabling parent [ 5.564437] clk[ 35.974455] vdd-usb-vbus2: disabling _cbus_recalc_rate: no gbus parent 35.981451] vddio-sdmmc-ap: disabling [32m[ 5.569073] tegra_dvfs 35.988877] vdd-3v3-sd: disabling 0m: GPU-cap: registered [ 5.573[ 35.995413] vdd-usb-hub-en: disabling 400] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 5.582106] tegra dvfs: vdd-core: nominal 1075mV, offset 1000000uV, step 12500uV, scaling enabled [ 5.590982] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 5.602244] tegra_dvfs: vdd-gpu-vts: registered [ 5.608027] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 5.618166] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 5.628474] input: gpio-keys as /devices/gpio-keys/input/input1 [ 5.667939] tegra_rtc 7000e000.rtc: setting system clock to 2022-04-21 18:04:30 UTC (1650564270) [ 5.679448] vi 54080000.vi: vi_probe: ++ [ 5.687510] vi 54080000.vi: initialized [ 5.694066] vi 54080000.vi: subdev nvcsi--2 bound [ 5.699709] vi 54080000.vi: subdev nvcsi--1 bound [ 5.705620] mmcblk mmc0:0001: Card claimed for testing. [ 5.712159] Disable partitions left on by BL [ 5.716467] disb [ 5.718586] bwmgr: missing cdev-type property [ 5.723142] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.732479] DRAM derating cdev registered. [ 5.738702] ALSA device list: [ 5.741709] #0: tegra-hda at 0x70038000 irq 81 [ 5.746353] #1: tegra-snd-t210ref-mobile-rt565x [ 5.760096] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.768276] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.776330] devtmpfs: mounted [ 5.788081] Freeing unused kernel memory: 8576K [ 5.869660] cgroup: cgroup2: unknown option "nsdelegate" [ 5.887039] systemd[1]: systemd 247 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 5.910071] systemd[1]: Detected architecture arm64. [ 5.944771] systemd[1]: Set hostname to . [ 6.018971] tegra-xusb 70090000.xusb: entering ELPG [ 6.024999] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 0, speed 0 [ 6.032942] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 6.040591] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 3 [ 6.049694] tegra-xusb 70090000.xusb: entering ELPG done [ 6.302222] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock \xe2\x86\x92 /run/docker.sock; please update the unit file accordingly. [ 6.359752] systemd[1]: Queued start job for default target Graphical Interface. [ 6.368892] random: systemd: uninitialized urandom read (16 bytes read) [ 6.421925] systemd[1]: Created slice system-getty.slice. [ 6.428059] random: systemd: uninitialized urandom read (16 bytes read) [ 6.436819] systemd[1]: Created slice system-modprobe.slice. [ 6.442882] random: systemd: uninitialized urandom read (16 bytes read) [ 6.451093] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.459435] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.467394] systemd[1]: Created slice User and Session Slice. [ 6.473616] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.482018] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.490021] systemd[1]: Reached target User and Group Name Lookups. [ 6.496478] systemd[1]: Reached target Paths. [ 6.501000] systemd[1]: Reached target Remote File Systems. [ 6.506722] systemd[1]: Reached target Slices. [ 6.511352] systemd[1]: Reached target Swap. [ 6.518197] systemd[1]: Listening on Syslog Socket. [ 6.523633] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.531178] systemd[1]: Listening on Journal Audit Socket. [ 6.537173] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.543642] systemd[1]: Listening on Journal Socket. [ 6.549220] systemd[1]: Listening on Network Service Netlink Socket. [ 6.556135] systemd[1]: Listening on udev Control Socket. [ 6.561971] systemd[1]: Listening on udev Kernel Socket. [ 6.567714] systemd[1]: Listening on User Database Manager Socket. [ 6.578062] systemd[1]: Mounting Huge Pages File System... [ 6.589831] systemd[1]: Mounting POSIX Message Queue File System... [ 6.601690] systemd[1]: Mounting Kernel Debug File System... [ 6.612520] systemd[1]: Mounting Kernel Trace File System... [ 6.626143] systemd[1]: Mounting Temporary Directory (/tmp)... [ 6.640220] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.655021] systemd[1]: Starting Load Kernel Module configfs... [ 6.667978] systemd[1]: Starting Load Kernel Module drm... [ 6.678072] systemd[1]: Starting Load Kernel Module fuse... [ 6.697407] systemd[1]: Starting NVIDIA-specific startup... [ 6.712390] systemd[1]: Starting Start psplash boot splash screen... [ 6.716274] fuse init (API version 7.26) [ 6.723763] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.734012] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 6.747105] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 6.762687] systemd[1]: Starting Journal Service... [ 6.776873] systemd[1]: Starting Load Kernel Modules... [ 6.790242] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.805616] systemd[1]: Starting Coldplug All udev Devices... [ 6.826077] systemd[1]: Started Start psplash boot splash screen. [ 6.838707] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=5 [ 6.840781] Bridge firewalling registered [ 6.856149] systemd[1]: Mounted Huge Pages File System. [ 6.862937] systemd[1]: Mounted POSIX Message Queue File System. [ 6.876035] systemd[1]: Mounted Kernel Debug File System. [ 6.882980] systemd[1]: Mounted Kernel Trace File System. [ 6.889359] systemd[1]: Mounted Temporary Directory (/tmp). [ 6.898297] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.908639] systemd[1]: modprobe@configfs.service: Succeeded. [ 6.916396] systemd[1]: Finished Load Kernel Module configfs. [ 6.924218] systemd[1]: modprobe@drm.service: Succeeded. [ 6.945348] systemd[1]: Finished Load Kernel Module drm. [ 6.952050] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.005508] systemd[1]: Finished Load Kernel Module fuse. [ 7.025077] systemd[1]: Finished NVIDIA-specific startup. [ 7.063063] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.071815] systemd[1]: Started Journal Service. [ 7.210587] systemd-journald[2050]: Received client request to flush runtime journal. [ 7.977408] input: ilitek_ts as /devices/7000c000.i2c/i2c-0/0-0041/input/input2 [ 8.007042] DSA: switch 0 0 parsed [ 8.010472] DSA: tree 0 parsed [ 8.170043] random: crng init done [ 8.173475] random: 7 urandom warning(s) missed due to ratelimiting [ 8.236856] libphy: dsa slave smi: probed [ 8.311995] Microchip KSZ8795 dsa-0.0:00: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:00, irq=-1) [ 8.408852] Microchip KSZ8795 dsa-0.0:01: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:01, irq=-1) [ 8.511578] Microchip KSZ8795 dsa-0.0:02: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:02, irq=-1) [ 8.600163] Microchip KSZ8795 dsa-0.0:03: attached PHY driver [Microchip KSZ8795] (mii_bus:phy_addr=dsa-0.0:03, irq=-1) [ 9.106532] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1264 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 9.120064] [drm] Initialized tegra-udrm 0.0.0 20182809 on minor 0 [ 9.272485] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: commit=5 [ 10.115980] 8021q: 802.1Q VLAN Support v1.8 [ 10.217241] systemd-journald[2050]: Received client request to flush runtime journal. [ 10.719734] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 10.735279] lan743x 0000:01:00.0 eth0: using MSIX interrupts, number of vectors = 6 [ 10.746195] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=-1) [ 10.746277] lan743x 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 10.746709] lan743x 0000:01:00.0 eth0: successfully registered ptp clock [ 10.756784] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.756876] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.959988] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 11.036530] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 11.069091] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 11.082907] tegradc tegradc.1: unblank [ 11.113075] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 11.891469] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 11.964343] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 11.991618] ksz8795-switch spi0.0 lan1: Link is Down [ 12.056062] ksz8795-switch spi0.0 lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.064354] IPv6: ADDRCONF(NETDEV_CHANGE): lan2: link becomes ready [ 12.087235] ksz8795-switch spi0.0 lan3: Link is Down [ 12.105915] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 12.119948] ksz8795-switch spi0.0 lan4: Link is Down [ 12.172165] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 12.760810] tegradc tegradc.1: unblank [ 15.239790] tegradc tegradc.1: unblank [ 16.945618] tegradc tegradc.1: blank - powerdown [ 17.007278] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 17.007285] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 17.007289] dp lt: state 0 (Reset), pending_lt_evt 0 [ 17.007293] dp lt: link training force disable [ 17.007295] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 17.035127] tegradc tegradc.1: IRQ when DC not powered! [ 18.033827] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 18.121677] tegradc tegradc.1: blank - powerdown [ 18.137242] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 18.145534] tegradc tegradc.1: unblank [ 18.166091] tegradc tegradc.1: updating CMU cmu_dirty=1 [ 18.175525] tegradc tegradc.1: nominal-pclk:157100000 parent:157098632 div:1.0 pclk:157098632 155529000~171239000 [ 18.182035] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 18.185767] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 18.189042] tegradc tegradc.1: dp: irq event received, ignoring [ 18.190612] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 18.190616] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 18.190618] dp lt: state 0 (Reset), pending_lt_evt 0 [ 18.191807] tegradc tegradc.1: DP: no prod_c_hbr prod settings node in device tree [ 18.191942] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 18.191947] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 18.192180] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 18.192187] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 18.192193] dp lt: tx_pu: 0x20 [ 18.192874] dp lt: CR done [ 18.192877] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 18.192881] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 18.194819] dp lt: CE done [ 18.194822] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 18.195006] tegradc tegradc.1: Link compression not supported by the panel [ 18.211879] tegradc tegradc.1: sync windows ret = 246 [ 18.357571] tegradc tegradc.1: unblank [ 18.745543] tegradc tegradc.1: unblank [ 19.855918] tegradc tegradc.1: unblank [ 23.801639] audit: type=1006 audit(1650564288.627:2): pid=5275 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ 24.338928] tegradc tegradc.1: unblank [ 35.961231] vdd-fan: disabling [ 35.967686] vdd-usb-vbus: disabling [ 35.974455] vdd-usb-vbus2: disabling [ 35.981451] vddio-sdmmc-ap: disabling [ 35.988877] vdd-3v3-sd: disabling [ 35.995413] vdd-usb-hub-en: disabling root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# root@jetson-nano-hive-emmc:~# /usr/bin/l4t-graphics-demos/x11/ctree ==================> fails: has white stripes across screen