0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29868(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568468K/4159488K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 115884K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001655] Console: colour dummy device 80x25 [ 0.001666] console [tty0] enabled [ 0.001672] bootconsole [uart8250] disabled [ 0.001693] kmemleak: Kernel memory leak detector disabled [ 0.001712] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001725] pid_max: default: 32768 minimum: 301 [ 0.002169] Security Framework initialized [ 0.002392] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002400] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003506] ftrace: allocating 47077 entries in 184 pages [ 0.170834] sched-energy: CPU device node has no sched-energy-costs [ 0.170866] ASID allocator initialised with 65536 entries [ 0.207589] tegra-id: chipid=22117. [ 0.207602] tegra-id: opt_subrevision=0. [ 0.207619] Tegra Speedo/IDDQ fuse revision 4 [ 0.207623] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207628] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.207633] Tegra: CPU Speedo Value 2051, SoC Speedo Value 1954, GPU Speedo Value 2057 [ 0.207637] Tegra: CPU IDDQ Value 1828, SoC IDDQ Value 2052, GPU IDDQ Value 2560 [ 0.207658] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.207674] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.207683] DTB Build time: Jul 26 2021 12:16:29 [ 0.257051] CPU1: Booted secondary processor [411fd071] [ 0.288954] CPU2: Booted secondary processor [411fd071] [ 0.320932] CPU3: Booted secondary processor [411fd071] [ 0.321014] Brought up 4 CPUs [ 0.321021] SMP: Total of 4 processors activated. [ 0.321029] CPU features: detected feature: 32-bit EL0 Support [ 0.321284] CPU: All CPU(s) started at EL2 [ 0.321302] alternatives: patching kernel code [ 0.329363] devtmpfs: initialized [ 0.366970] Initilizing CustomIPI irq domain [ 0.367270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.367289] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.377845] pinctrl core: initialized pinctrl subsystem [ 0.378414] OS set in device tree is not L4T. [ 0.378827] regulator-dummy: no parameters [ 0.379099] Initializing plugin-manager [ 0.379261] Plugin module not found [ 0.379447] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.379965] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.380926] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.381186] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.381819] node /plugin-manager/fragement@13 match with board >=3448-0000-300 [ 0.385298] NET: Registered protocol family 16 [ 0.387849] pstore: using zlib compression [ 0.387887] console [pstore-1] enabled [ 0.387892] pstore: Registered ramoops as persistent store backend [ 0.387897] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.397071] cpuidle: using governor menu [ 0.400218] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.402026] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.402060] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.405454] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.407822] Serial: AMBA PL011 UART driver [ 0.408339] tegra_powergate_init: DONE [ 0.408354] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.408361] DTB Build time: Jul 26 2021 12:16:29 [ 0.410297] Tegra reboot handler registered. [ 0.414893] iommu: Adding device tegra-carveouts to group 0 [ 0.415032] platform tegra-carveouts: domain=ffffffc0f94553d8 allocates as[0]=ffffffc0f9bd40a8 [ 0.415390] iommu: Adding device smmu_test to group 1 [ 0.415436] platform smmu_test: domain=ffffffc0f9455618 allocates as[0]=ffffffc0f9bd4110 [ 0.416248] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.416300] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.416351] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.416361] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.416384] mc-err: mcerr ops are set to t21x [ 0.424049] iommu: Adding device 70090000.xusb to group 2 [ 0.424322] iommu: Adding device 70006000.serial to group 3 [ 0.424394] platform 70006000.serial: domain=ffffffc0f94ca558 allocates as[0]=ffffffc0f9bd4178 [ 0.424818] iommu: Adding device 70006040.serial to group 4 [ 0.425117] iommu: Adding device 70006200.serial to group 5 [ 0.425346] iommu: Adding device sound to group 6 [ 0.425395] platform sound: domain=ffffffc0f94caa98 allocates as[0]=ffffffc0f9bd41e0 [ 0.425945] iommu: Adding device 7000d400.spi to group 7 [ 0.426204] iommu: Adding device 7000d600.spi to group 8 [ 0.426474] iommu: Adding device 70410000.spi to group 9 [ 0.426780] iommu: Adding device 50000000.host1x to group 10 [ 0.427049] iommu: Adding device 54080000.vi to group 11 [ 0.427437] iommu: Adding device 54600000.isp to group 12 [ 0.427726] iommu: Adding device 54680000.isp to group 13 [ 0.427996] iommu: Adding device tegradc.0 to group 14 [ 0.428049] platform tegradc.0: domain=ffffffc0f94d69d8 allocates as[0]=ffffffc0f9bd4248 [ 0.428567] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.428889] iommu: Adding device tegradc.1 to group 15 [ 0.428935] platform tegradc.1: domain=ffffffc0f94d6c18 allocates as[0]=ffffffc0f9bd42b0 [ 0.429509] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.429770] iommu: Adding device 54340000.vic to group 16 [ 0.429978] iommu: Adding device 544c0000.nvenc to group 17 [ 0.430184] iommu: Adding device 54500000.tsec to group 18 [ 0.430380] iommu: Adding device 54100000.tsecb to group 19 [ 0.430607] iommu: Adding device 54480000.nvdec to group 20 [ 0.430800] iommu: Adding device 54380000.nvjpg to group 21 [ 0.431869] iommu: Adding device 546c0000.i2c to group 22 [ 0.432192] iommu: Adding device 57000000.gpu to group 23 [ 0.432244] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[0]=ffffffc0f9bd4318 [ 0.432283] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[1]=ffffffc0f9bd4380 [ 0.432326] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[2]=ffffffc0f9bd43e8 [ 0.432383] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[3]=ffffffc0f9bd4450 [ 0.433308] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.433318] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.433330] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.433334] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.433338] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.485133] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.485142] tegra-pmc: Clear bootloader IO dpd settings [ 0.485162] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.485225] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.485519] iommu: Adding device 70012000.se to group 24 [ 0.486313] iommu: Adding device 7000c000.i2c to group 25 [ 0.486565] iommu: Adding device 7000c400.i2c to group 26 [ 0.486847] iommu: Adding device 7000c500.i2c to group 27 [ 0.487098] iommu: Adding device 7000c700.i2c to group 28 [ 0.487343] iommu: Adding device 7000d000.i2c to group 29 [ 0.487591] iommu: Adding device 7000d100.i2c to group 30 [ 0.487873] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.487922] platform sdhci-tegra.0: domain=ffffffc0f956be58 allocates as[0]=ffffffc0f9bd44b8 [ 0.488743] iommu: Adding device 700d0000.xudc to group 32 [ 0.492016] vdd-ac-bat: 5000 mV [ 0.492397] vdd-5v0-sys: 5000 mV [ 0.493069] vdd-5v0-hdmi: 5000 mV [ 0.493490] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.493726] vdd-1v8-sys: 1800 mV [ 0.494098] vdd-fan: 5000 mV [ 0.494316] vdd-fan: supplied by vdd-5v0-sys [ 0.494544] vdd-usb-vbus: 5000 mV [ 0.494761] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.495089] vdd-usb-vbus2: 5000 mV [ 0.530098] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.532283] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.533568] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.533596] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.533617] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.533965] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.541885] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.542233] SCSI subsystem initialized [ 0.542444] libata version 3.00 loaded. [ 0.542684] usbcore: registered new interface driver usbfs [ 0.542742] usbcore: registered new interface driver hub [ 0.542795] usbcore: registered new device driver usb [ 0.546771] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.553062] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.554013] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.554204] random: fast init done [ 0.557018] vdd-ddr-1v1: 1150 mV [ 0.560948] vdd-pre-reg-1v35: 1350 mV [ 0.564947] vdd-1v8: 1800 mV [ 0.568950] avdd-sys-1v2: 1200 mV [ 0.572947] vdd-pex-1v0: 1050 mV [ 0.573589] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.574117] max77620-ldo3: at 3100 mV [ 0.576954] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.577480] max77620-ldo5: at 3100 mV [ 0.580950] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.584950] avdd-1v05-pll: 1050 mV [ 0.588948] avdd-io-hdmi-dp: 1050 mV [ 0.591374] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.591659] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.591944] max77620 4-003c: max77620 probe successful [ 0.594616] media: Linux media interface: v0.10 [ 0.594672] Linux video capture interface: v2.00 [ 0.595602] pps_core: LinuxPPS API ver. 1 registered [ 0.595608] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.595633] PTP clock support registered [ 0.598726] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.599725] Advanced Linux Sound Architecture Driver Initialized. [ 0.600647] Bluetooth: Core ver 2.22 [ 0.600745] NET: Registered protocol family 31 [ 0.600750] Bluetooth: HCI device and connection manager initialized [ 0.600763] Bluetooth: HCI socket layer initialized [ 0.600770] Bluetooth: L2CAP socket layer initialized [ 0.600819] Bluetooth: SCO socket layer initialized [ 0.602661] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.602679] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.602727] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.602741] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.606214] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.607398] vdd-3v3-sys: 3300 mV [ 0.607744] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.607796] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.608323] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.608722] vdd-3v3-sd: 3300 mV [ 0.609133] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.609624] avdd-io-edp-1v05: 1050 mV [ 0.609964] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.610090] vdd-usb-hub-en: 5000 mV [ 0.610421] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.611415] camchar: rtcpu character device driver loaded [ 0.612117] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.613586] clocksource: Switched to clocksource arch_sys_counter [ 0.653675] VFS: Disk quotas dquot_6.6.0 [ 0.653813] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.654296] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.654725] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.654740] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.654931] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.654937] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.654948] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.654972] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.654978] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.654992] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.655000] nvmap_page_pool_init: Total RAM pages: 1010901 [ 0.655005] nvmap_page_pool_init: nvmap page pool size: 126362 pages (493 MB) [ 0.655091] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.655534] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.656327] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.664742] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.665182] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.665552] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.665900] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.666074] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.666341] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.666345] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.666768] NET: Registered protocol family 2 [ 0.667733] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.667945] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.668442] TCP: Hash tables configured (established 32768 bind 32768) [ 0.668586] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.668666] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.669075] NET: Registered protocol family 1 [ 0.669760] RPC: Registered named UNIX socket transport module. [ 0.669765] RPC: Registered udp transport module. [ 0.669769] RPC: Registered tcp transport module. [ 0.669774] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.669786] PCI: CLS 0 bytes, default 64 [ 0.670017] Trying to unpack rootfs image as initramfs... [ 0.973952] Freeing initrd memory: 6992K [ 0.983582] host1x 50000000.host1x: initialized [ 0.985371] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.988681] audit: initializing netlink subsys (disabled) [ 0.988749] audit: type=2000 audit(0.839:1): initialized [ 0.989411] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.999350] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.000771] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.001547] 9p: Installing v9fs 9p2000 file system support [ 1.004801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.004919] io scheduler noop registered [ 1.005212] io scheduler cfq registered (default) [ 1.007897] gic 702f9000.agic: GIC IRQ controller registered [ 1.010726] iommu: Ad0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29868(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568468K/4159488K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 115884K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001655] Console: colour dummy device 80x25 [ 0.001666] console [tty0] enabled [ 0.001672] bootconsole [uart8250] disabled [ 0.001693] kmemleak: Kernel memory leak detector disabled [ 0.001712] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001725] pid_max: default: 32768 minimum: 301 [ 0.002169] Security Framework initialized [ 0.002392] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002400] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003506] ftrace: allocating 47077 entries in 184 pages [ 0.170834] sched-energy: CPU device node has no sched-energy-costs [ 0.170866] ASID allocator initialised with 65536 entries [ 0.207589] tegra-id: chipid=22117. [ 0.207602] tegra-id: opt_subrevision=0. [ 0.207619] Tegra Speedo/IDDQ fuse revision 4 [ 0.207623] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207628] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.207633] Tegra: CPU Speedo Value 2051, SoC Speedo Value 1954, GPU Speedo Value 2057 [ 0.207637] Tegra: CPU IDDQ Value 1828, SoC IDDQ Value 2052, GPU IDDQ Value 2560 [ 0.207658] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.207674] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.207683] DTB Build time: Jul 26 2021 12:16:29 [ 0.257051] CPU1: Booted secondary processor [411fd071] [ 0.288954] CPU2: Booted secondary processor [411fd071] [ 0.320932] CPU3: Booted secondary processor [411fd071] [ 0.321014] Brought up 4 CPUs [ 0.321021] SMP: Total of 4 processors activated. [ 0.321029] CPU features: detected feature: 32-bit EL0 Support [ 0.321284] CPU: All CPU(s) started at EL2 [ 0.321302] alternatives: patching kernel code [ 0.329363] devtmpfs: initialized [ 0.366970] Initilizing CustomIPI irq domain [ 0.367270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.367289] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.377845] pinctrl core: initialized pinctrl subsystem [ 0.378414] OS set in device tree is not L4T. [ 0.378827] regulator-dummy: no parameters [ 0.379099] Initializing plugin-manager [ 0.379261] Plugin module not found [ 0.379447] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.379965] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.380926] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.381186] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.381819] node /plugin-manager/fragement@13 match with board >=3448-0000-300 [ 0.385298] NET: Registered protocol family 16 [ 0.387849] pstore: using zlib compression [ 0.387887] console [pstore-1] enabled [ 0.387892] pstore: Registered ramoops as persistent store backend [ 0.387897] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.397071] cpuidle: using governor menu [ 0.400218] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.402026] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.402060] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.405454] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.407822] Serial: AMBA PL011 UART driver [ 0.408339] tegra_powergate_init: DONE [ 0.408354] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.408361] DTB Build time: Jul 26 2021 12:16:29 [ 0.410297] Tegra reboot handler registered. [ 0.414893] iommu: Adding device tegra-carveouts to group 0 [ 0.415032] platform tegra-carveouts: domain=ffffffc0f94553d8 allocates as[0]=ffffffc0f9bd40a8 [ 0.415390] iommu: Adding device smmu_test to group 1 [ 0.415436] platform smmu_test: domain=ffffffc0f9455618 allocates as[0]=ffffffc0f9bd4110 [ 0.416248] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.416300] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.416351] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.416361] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.416384] mc-err: mcerr ops are set to t21x [ 0.424049] iommu: Adding device 70090000.xusb to group 2 [ 0.424322] iommu: Adding device 70006000.serial to group 3 [ 0.424394] platform 70006000.serial: domain=ffffffc0f94ca558 allocates as[0]=ffffffc0f9bd4178 [ 0.424818] iommu: Adding device 70006040.serial to group 4 [ 0.425117] iommu: Adding device 70006200.serial to group 5 [ 0.425346] iommu: Adding device sound to group 6 [ 0.425395] platform sound: domain=ffffffc0f94caa98 allocates as[0]=ffffffc0f9bd41e0 [ 0.425945] iommu: Adding device 7000d400.spi to group 7 [ 0.426204] iommu: Adding device 7000d600.spi to group 8 [ 0.426474] iommu: Adding device 70410000.spi to group 9 [ 0.426780] iommu: Adding device 50000000.host1x to group 10 [ 0.427049] iommu: Adding device 54080000.vi to group 11 [ 0.427437] iommu: Adding device 54600000.isp to group 12 [ 0.427726] iommu: Adding device 54680000.isp to group 13 [ 0.427996] iommu: Adding device tegradc.0 to group 14 [ 0.428049] platform tegradc.0: domain=ffffffc0f94d69d8 allocates as[0]=ffffffc0f9bd4248 [ 0.428567] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.428889] iommu: Adding device tegradc.1 to group 15 [ 0.428935] platform tegradc.1: domain=ffffffc0f94d6c18 allocates as[0]=ffffffc0f9bd42b0 [ 0.429509] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.429770] iommu: Adding device 54340000.vic to group 16 [ 0.429978] iommu: Adding device 544c0000.nvenc to group 17 [ 0.430184] iommu: Adding device 54500000.tsec to group 18 [ 0.430380] iommu: Adding device 54100000.tsecb to group 19 [ 0.430607] iommu: Adding device 54480000.nvdec to group 20 [ 0.430800] iommu: Adding device 54380000.nvjpg to group 21 [ 0.431869] iommu: Adding device 546c0000.i2c to group 22 [ 0.432192] iommu: Adding device 57000000.gpu to group 23 [ 0.432244] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[0]=ffffffc0f9bd4318 [ 0.432283] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[1]=ffffffc0f9bd4380 [ 0.432326] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[2]=ffffffc0f9bd43e8 [ 0.432383] platform 57000000.gpu: domain=ffffffc0f94e1c18 allocates as[3]=ffffffc0f9bd4450 [ 0.433308] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.433318] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.433330] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.433334] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.433338] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.485133] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.485142] tegra-pmc: Clear bootloader IO dpd settings [ 0.485162] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.485225] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.485519] iommu: Adding device 70012000.se to group 24 [ 0.486313] iommu: Adding device 7000c000.i2c to group 25 [ 0.486565] iommu: Adding device 7000c400.i2c to group 26 [ 0.486847] iommu: Adding device 7000c500.i2c to group 27 [ 0.487098] iommu: Adding device 7000c700.i2c to group 28 [ 0.487343] iommu: Adding device 7000d000.i2c to group 29 [ 0.487591] iommu: Adding device 7000d100.i2c to group 30 [ 0.487873] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.487922] platform sdhci-tegra.0: domain=ffffffc0f956be58 allocates as[0]=ffffffc0f9bd44b8 [ 0.488743] iommu: Adding device 700d0000.xudc to group 32 [ 0.492016] vdd-ac-bat: 5000 mV [ 0.492397] vdd-5v0-sys: 5000 mV [ 0.493069] vdd-5v0-hdmi: 5000 mV [ 0.493490] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.493726] vdd-1v8-sys: 1800 mV [ 0.494098] vdd-fan: 5000 mV [ 0.494316] vdd-fan: supplied by vdd-5v0-sys [ 0.494544] vdd-usb-vbus: 5000 mV [ 0.494761] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.495089] vdd-usb-vbus2: 5000 mV [ 0.530098] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.532283] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.533568] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.533596] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.533617] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.533965] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.541885] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.542233] SCSI subsystem initialized [ 0.542444] libata version 3.00 loaded. [ 0.542684] usbcore: registered new interface driver usbfs [ 0.542742] usbcore: registered new interface driver hub [ 0.542795] usbcore: registered new device driver usb [ 0.546771] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.553062] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.554013] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.554204] random: fast init done [ 0.557018] vdd-ddr-1v1: 1150 mV [ 0.560948] vdd-pre-reg-1v35: 1350 mV [ 0.564947] vdd-1v8: 1800 mV [ 0.568950] avdd-sys-1v2: 1200 mV [ 0.572947] vdd-pex-1v0: 1050 mV [ 0.573589] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.574117] max77620-ldo3: at 3100 mV [ 0.576954] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.577480] max77620-ldo5: at 3100 mV [ 0.580950] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.584950] avdd-1v05-pll: 1050 mV [ 0.588948] avdd-io-hdmi-dp: 1050 mV [ 0.591374] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.591659] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.591944] max77620 4-003c: max77620 probe successful [ 0.594616] media: Linux media interface: v0.10 [ 0.594672] Linux video capture interface: v2.00 [ 0.595602] pps_core: LinuxPPS API ver. 1 registered [ 0.595608] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.595633] PTP clock support registered [ 0.598726] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.599725] Advanced Linux Sound Architecture Driver Initialized. [ 0.600647] Bluetooth: Core ver 2.22 [ 0.600745] NET: Registered protocol family 31 [ 0.600750] Bluetooth: HCI device and connection manager initialized [ 0.600763] Bluetooth: HCI socket layer initialized [ 0.600770] Bluetooth: L2CAP socket layer initialized [ 0.600819] Bluetooth: SCO socket layer initialized [ 0.602661] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.602679] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.602727] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.602741] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.606214] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.607398] vdd-3v3-sys: 3300 mV [ 0.607744] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.607796] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.608323] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.608722] vdd-3v3-sd: 3300 mV [ 0.609133] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.609624] avdd-io-edp-1v05: 1050 mV [ 0.609964] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.610090] vdd-usb-hub-en: 5000 mV [ 0.610421] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.611415] camchar: rtcpu character device driver loaded [ 0.612117] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.613586] clocksource: Switched to clocksource arch_sys_counter [ 0.653675] VFS: Disk quotas dquot_6.6.0 [ 0.653813] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.654296] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.654725] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.654740] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.654931] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.654937] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.654948] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.654972] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.654978] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.654992] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.655000] nvmap_page_pool_init: Total RAM pages: 1010901 [ 0.655005] nvmap_page_pool_init: nvmap page pool size: 126362 pages (493 MB) [ 0.655091] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.655534] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.656327] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.664742] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.665182] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.665552] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.665900] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.666074] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.666341] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.666345] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.666768] NET: Registered protocol family 2 [ 0.667733] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.667945] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.668442] TCP: Hash tables configured (established 32768 bind 32768) [ 0.668586] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.668666] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.669075] NET: Registered protocol family 1 [ 0.669760] RPC: Registered named UNIX socket transport module. [ 0.669765] RPC: Registered udp transport module. [ 0.669769] RPC: Registered tcp transport module. [ 0.669774] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.669786] PCI: CLS 0 bytes, default 64 [ 0.670017] Trying to unpack rootfs image as initramfs... [ 0.973952] Freeing initrd memory: 6992K [ 0.983582] host1x 50000000.host1x: initialized [ 0.985371] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.988681] audit: initializing netlink subsys (disabled) [ 0.988749] audit: type=2000 audit(0.839:1): initialized [ 0.989411] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.999350] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.000771] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.001547] 9p: Installing v9fs 9p2000 file system support [ 1.004801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.004919] io scheduler noop registered [ 1.005212] io scheduler cfq registered (default) [ 1.007897] gic 702f9000.agic: GIC IRQ controller registered [ 1.010726] iommu: Adding device 702ef000.adsp to group 33 [ 1.018821] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.018971] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.019577] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7208c11 [ 1.019586] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.021179] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.021287] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.021380] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.021568] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.022150] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.022237] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.022334] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.022420] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.022514] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.022598] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.028670] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.030370] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.032215] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.033501] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.033915] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.035167] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.035374] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.035602] Adding domain tsec-pd to PM domain host1x-pd [ 1.037791] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.038631] tsec 54500000.tsec: initialized [ 1.039971] tsec 54100000.tsecb: initialized [ 1.040681] Adding domain nvdec-pd to PM domain host1x-pd [ 1.044203] nvdec 54480000.nvdec: initialized [ 1.045268] Adding domain vic03-pd to PM domain host1x-pd [ 1.045455] Adding domain msenc-pd to PM domain host1x-pd [ 1.045646] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.049743] falcon 54340000.vic: initialized [ 1.051030] falcon 544c0000.nvenc: initialized [ 1.052353] falcon 54380000.nvjpg: initialized [ 1.056716] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.056772] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.056805] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.056989] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.057078] display board info: id 0x0, fab 0x0 [ 1.057092] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.057096] tegra_cec 70015000.tegra_cec: probed [ 1.057146] generic_infoframe_type: 0x87 [ 1.057294] tegradc tegradc.0: DT parsed successfully [ 1.057342] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.064664] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.070018] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.070719] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.070726] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.071032] kfuse 7000fc00.kfuse: initialized [ 1.071923] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.072710] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.073665] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.073677] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.074065] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.075321] vdd-gpu: applied init 1000000uV constraint [ 1.075329] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.075703] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.079275] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.079372] No Device Node present for smmu client: serial8250 !! [ 1.079382] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.079418] iommu: Adding device serial8250 to group 35 [ 1.081798] console [ttyS0] disabled [ 1.081870] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.081961] console [ttyS0] enabled [ 1.082893] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.083179] serial-tegra 70006200.serial: RX in PIO mode [ 1.083263] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.084237] [drm] Initialized [ 1.094883] brd: module loaded [ 1.097526] tegradc tegradc.0: probed [ 1.098365] Console: switching to colour frame buffer device 128x48 [ 1.098428] tegradc tegradc.0: fb registered [ 1.100811] loop: module loaded [ 1.100894] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.101022] tegra_profiler: auth: init [ 1.102270] THERMAL EST: found 2 subdevs [ 1.102279] THERMAL EST num_resources: 0 [ 1.102285] [THERMAL EST subdev 0] [ 1.102295] [THERMAL EST subdev 1] [ 1.102757] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.102762] THERMAL EST: thz register success. [ 1.102932] THERMAL EST: end of probe, return err: 0 [ 1.104180] sd: No Scsi addr parsed to reserve index [ 1.104220] hisi_sas: driver version v1.6 [ 1.107064] tegradc tegradc.0: nominal-pclk:64995840 parent:64994921 div:1.0 pclk:64994921 64345842~70845422 [ 1.107172] tegradc tegradc.0: hdmi: tmds rate:64995K prod-setting:prod_c_hdmi_54m_75m [ 1.108343] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.109467] tegra-qspi 70410000.spi: Prod settings list not found [ 1.110683] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.110694] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.113749] libphy: Fixed MDIO Bus: probed [ 1.114568] tun: Universal TUN/TAP device driver, 1.6 [ 1.114573] tun: (C) 1999-2004 Max Krasnyansky [ 1.115646] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.115653] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.115707] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.115711] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.115759] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.115763] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.115809] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.115814] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.116984] PPP generic driver version 2.4.2 [ 1.117190] PPP BSD Compression module registered [ 1.117198] PPP Deflate Compression module registered [ 1.117238] PPP MPPE Compression module registered [ 1.117245] NET: Registered protocol family 24 [ 1.117328] usbcore: registered new interface driver r8152 [ 1.117376] usbcore: registered new interface driver asix [ 1.117428] usbcore: registered new interface driver ax88179_178a [ 1.117468] usbcore: registered new interface driver cdc_ether [ 1.117507] usbcore: registered new interface driver net1080 [ 1.117550] usbcore: registered new interface driver cdc_subset [ 1.117651] usbcore: registered new interface driver zaurus [ 1.117716] usbcore: registered new interface driver cdc_ncm [ 1.117917] VFIO - User Level meta-driver version: 0.3 [ 1.119221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.119239] ehci-pci: EHCI PCI platform driver [ 1.119290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.119303] ohci-pci: OHCI PCI platform driver [ 1.119345] ohci-platform: OHCI generic platform driver [ 1.122627] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.123251] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.124454] tegra-xusb 70090000.xusb: extcon 0: ffffffc0fa5d2c00 id [ 1.127375] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.127428] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.127456] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.128242] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.128306] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.128520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.128527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.128532] usb usb1: Product: xHCI Host Controller [ 1.128537] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.128542] usb usb1: SerialNumber: 70090000.xusb [ 1.129173] hub 1-0:1.0: USB hub found [ 1.129212] hub 1-0:1.0: 5 ports detected [ 1.129907] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.129918] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.130041] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.130144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.130151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.130157] usb usb2: Product: xHCI Host Controller [ 1.130162] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.130166] usb usb2: SerialNumber: 70090000.xusb [ 1.130613] hub 2-0:1.0: USB hub found [ 1.130646] hub 2-0:1.0: 4 ports detected [ 1.131041] usbcore: registered new interface driver uas [ 1.131130] usbcore: registered new interface driver usb-storage [ 1.131244] usbcore: registered new interface driver usbserial [ 1.135625] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.137237] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.137251] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.137269] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.137281] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.137308] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.137936] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.137943] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.138223] mousedev: PS/2 mouse device common for all mice [ 1.138340] usbcore: registered new interface driver xpad [ 1.143821] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.143828] Extcon AUX1(HDMI) enable [ 1.144696] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.144768] tegradc tegradc.1: No lt-data, using default setting [ 1.144800] tegradc tegradc.1: No hpd-gpio in DT [ 1.144834] tegradc tegradc.1: DT parsed successfully [ 1.144884] tegradc tegradc.1: Display dc.ffffff800ad40000 registered with id=1 [ 1.146236] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.155946] tegradc tegradc.1: probed [ 1.156316] tegradc tegradc.1: fb registered [ 1.159496] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.159504] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.159513] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.159527] tegradc tegradc.1: blank - powerdown [ 1.159544] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.159548] Extcon DP: HPD disabled [ 1.159551] hpd: hpd_switch 0 [ 1.159556] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.159565] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.159572] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.233698] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.237856] usb usb2: usb_suspend_both: status 0 [ 1.266856] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.269405] rtc rtc1: alarm rtc device [ 1.269426] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.269457] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.270144] i2c /dev entries driver [ 1.272414] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.272915] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.272924] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.273862] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.277295] tegradc tegradc.0: blank - powerdown [ 1.297191] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.297283] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.297392] imx219 7-0010: board setup failed [ 1.297458] imx219: probe of 7-0010 failed with error -121 [ 1.298090] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.321379] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.321466] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.321541] imx219 8-0010: board setup failed [ 1.321629] imx219: probe of 8-0010 failed with error -121 [ 1.323088] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.326884] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.326886] Extcon AUX1(HDMI) disable [ 1.327000] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.327005] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.327319] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.327332] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.327340] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.327480] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.327490] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.327496] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.327644] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.327653] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.327658] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.327832] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.328397] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.328443] tegra_aotag tegra-aotag: Invalid temp readout [ 1.328463] tegra_aotag tegra-aotag: Invalid temp readout [ 1.328479] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.328487] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.329422] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.329437] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.329647] tegra_aotag tegra-aotag: Invalid temp readout [ 1.329669] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.330099] parse_throttle_dt_data: Num cap clks = 6 [ 1.330103] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.330109] parse_throttle_dt_data: clk=gpu type=4 [ 1.330132] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.330151] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.330169] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.330172] parse_throttle_dt_data: clk=emc type=3 [ 1.330544] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.330673] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.330813] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.331489] FAN dev name: pwm-fan [ 1.331534] FAN:gpio request success. [ 1.331576] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.331821] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.331942] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.331950] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.332026] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.332031] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.332036] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.332040] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.332044] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.332048] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.332052] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.332056] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.332060] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.332064] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.334426] device-mapper: uevent: version 1.0.3 [ 1.334841] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.337438] tegra210-cpufreq cpufreq: probe()...completed [ 1.338253] sdhci: Secure Digital Host Controller Interface driver [ 1.338254] sdhci: Copyright(c) Pierre Ossman [ 1.338256] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.338763] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.339141] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.339266] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.346335] tegra-se 70012000.se: tegra_se_probe: complete [ 1.346962] hidraw: raw HID events driver (C) Jiri Kosina [ 1.348255] usbcore: registered new interface driver usbhid [ 1.348257] usbhid: USB HID core driver [ 1.351580] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.351759] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.354021] nvpmodel: initialized successfully [ 1.355054] usbcore: registered new interface driver snd-usb-audio [ 1.355110] No Device Node present for smmu client: snd-soc-dummy !! [ 1.355114] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.355131] iommu: Adding device snd-soc-dummy to group 36 [ 1.356578] tegradc tegradc.0: unblank [ 1.362707] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 1.362760] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 1.363797] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.367591] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.374595] OPE platform probe [ 1.374684] OPE platform probe successful [ 1.374940] OPE platform probe [ 1.375018] OPE platform probe successful [ 1.385816] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.398568] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.398570] Extcon AUX1(HDMI) enable [ 1.400346] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.400480] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.400608] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.400735] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.400864] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.400992] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.401124] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.401253] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.401411] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.401549] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.413358] u32 classifier [ 1.413359] Actions configured [ 1.413428] Initializing XFRM netlink socket [ 1.414045] tegradc tegradc.0: sync windows ret = 246 [ 1.414175] NET: Registered protocol family 10 [ 1.414843] NET: Registered protocol family 17 [ 1.414854] NET: Registered protocol family 15 [ 1.414925] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.414971] Bluetooth: RFCOMM socket layer initialized [ 1.414980] Bluetooth: RFCOMM ver 1.11 [ 1.414985] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.414989] Bluetooth: HIDP socket layer initialized [ 1.415006] 9pnet: Installing 9P2000 support [ 1.415042] Key type dns_resolver registered [ 1.415396] Registered cp15_barrier emulation handler [ 1.415402] Registered setend emulation handler [ 1.417807] registered taskstats version 1 [ 1.418339] Adding domain ve2-pd to PM domain host1x-pd [ 1.418594] Adding domain ve-pd to PM domain host1x-pd [ 1.420676] isp 54600000.isp: initialized [ 1.421675] isp 54680000.isp: initialized [ 1.432247] last reset is due to software reset [ 1.432250] KERNEL: PMC reset status reg: 0x3 [ 1.432314] BL: PMC reset status reg: 0x3 [ 1.432315] BL: PMIC poweroff Event Recorder: 0x0 [ 1.433871] clk_cbus_recalc_rate: no gbus parent [ 1.433876] clk_cbus_round_rate: no gbus parent [ 1.433878] clk_cbus_round_rate: no gbus parent [ 1.433884] clk_cbus_recalc_rate: no gbus parent [ 1.433980] clk_cbus_recalc_rate: no gbus parent [ 1.433983] clk_cbus_round_rate: no gbus parent [ 1.433984] clk_cbus_round_rate: no gbus parent [ 1.433987] clk_cbus_recalc_rate: no gbus parent [ 1.434655] tegra_dvfs: GPU-cap: registered [ 1.434712] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.434714] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.434716] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.436178] tegra_dvfs: vdd-gpu-vts: registered [ 1.436905] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.437591] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.438128] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.457599] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.457603] Extcon HDMI: HPD enabled [ 1.457620] tegradc tegradc.0: hdmi: plugged [ 1.469594] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.470871] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:44:40 UTC (946691080) [ 1.471884] vi 54080000.vi: vi_probe: ++ [ 1.473444] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.474575] vi 54080000.vi: initialized [ 1.476639] vi 54080000.vi: subdev nvcsi--2 bound [ 1.476745] vi 54080000.vi: subdev nvcsi--1 bound [ 1.477537] Disable partitions left on by BL [ 1.477540] disb [ 1.477607] bwmgr: missing cdev-type property [ 1.477700] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.477707] DRAM derating cdev registered. [ 1.478651] ALSA device list: [ 1.478655] #0: tegra-hda at 0x70038000 irq 83 [ 1.478657] #1: tegra-snd-t210ref-mobile-rt565x [ 1.481972] Freeing unused kernel memory: 8640K [ 1.498791] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.498797] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.498801] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.498804] usb 1-2: Manufacturer: Generic [ 1.499705] hub 1-2:1.0: USB hub found [ 1.500292] hub 1-2:1.0: 4 ports detected [ 1.506518] Root device found: mmcblk0p1 [ 1.584727] mmc0: Applying tuning correction [ 1.584743] mmc0: Tap value after applying correction 60 [ 1.584762] mmc0: hw tuning done ... [ 1.584797] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 1.585213] mmcblk0: mmc0:aaaa SD64G 59.5 GiB [ 1.590039] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.610112] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.638586] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.638591] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.638594] usb 2-1: Product: 4-Port USB 3.1 Hub [ 1.638596] usb 2-1: Manufacturer: Generic [ 1.641922] hub 2-1:1.0: USB hub found [ 1.642751] hub 2-1:1.0: 4 ports detected [ 1.711352] Found dev node: /dev/mmcblk0p1 [ 1.793602] usb 2-1: usb_suspend_both: status 0 [ 1.793756] usb usb2: usb_suspend_both: status 0 [ 1.797654] usb 1-2.2: new high-speed USB device number 3 using tegra-xusb [ 1.819416] usb 1-2.2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.819422] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.819425] usb 1-2.2: Product: USB2.0 Hub [ 1.820543] hub 1-2.2:1.0: USB hub found [ 1.820853] hub 1-2.2:1.0: 4 ports detected [ 1.880223] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.905598] usb 1-2.4: new low-speed USB device number 4 using tegra-xusb [ 1.929990] usb 1-2.4: New USB device found, idVendor=093a, idProduct=2510 [ 1.929996] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.930000] usb 1-2.4: Product: USB Optical Mouse [ 1.930004] usb 1-2.4: Manufacturer: PixArt [ 1.933145] input: PixArt USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.0/0003:093A:2510.0001/input/input2 [ 1.933387] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-70090000.xusb-2.4/input0 [ 2.065660] tegra_cec 70015000.tegra_cec: physical address: 20:00. [ 2.109595] usb 1-2.2.1: new low-speed USB device number 5 using tegra-xusb [ 2.130278] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.130281] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.156100] usb 1-2.2.1: New USB device found, idVendor=04d9, idProduct=0006 [ 2.156104] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.156107] usb 1-2.2.1: Product: RPI Wired Keyboard 4 [ 2.156109] usb 1-2.2.1: Manufacturer: [ 2.168437] input: RPI Wired Keyboard 4 as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:04D9:0006.0002/input/input3 [ 2.226066] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Keyboard [ RPI Wired Keyboard 4] on usb-70090000.xusb-2.2.1/input0 [ 2.237350] input: RPI Wired Keyboard 4 as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:04D9:0006.0003/input/input4 [ 2.290078] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.292198] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.293906] hid-generic 0003:04D9:0006.0003: input,hidraw2: USB HID v1.11 Device [ RPI Wired Keyboard 4] on usb-70090000.xusb-2.2.1/input1 [ 2.396602] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.396607] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.396610] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.396614] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.396617] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.396637] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.396695] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.396829] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.396930] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.396953] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.396982] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.397002] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.397134] pci 0000:01:00.0: supports D1 D2 [ 2.397137] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.409714] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.409738] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.409742] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.409747] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.409764] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.409779] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.409785] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.409789] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.409793] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.410003] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.410006] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.410011] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.410083] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.410243] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.410259] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.424639] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.424701] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:3d:03:80 from device tree [ 2.425095] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.425108] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.815303] EXT4-fs (mmcblk0p1): 10 orphan inodes deleted [ 2.815306] EXT4-fs (mmcblk0p1): recovery complete [ 2.916213] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.918253] Rootfs mounted over mmcblk0p1 [ 2.936721] Switching from initrd to actual rootfs [ 3.102241] systemd[1]: System time before build time, advancing clock. [ 3.121784] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.133768] cgroup: cgroup2: unknown option "nsdelegate" [ 3.159205] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.159981] systemd[1]: Detected architecture arm64. [ 3.182626] systemd[1]: Set hostname to . [ 3.287842] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.287852] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.425159] random: systemd: uninitialized urandom read (16 bytes read) [ 3.426995] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.427122] random: systemd: uninitialized urandom read (16 bytes read) [ 3.427144] systemd[1]: Reached target User and Group Name Lookups. [ 3.427173] random: systemd: uninitialized urandom read (16 bytes read) [ 3.427291] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.429087] systemd[1]: Created slice System Slice. [ 3.429323] systemd[1]: Listening on Syslog Socket. [ 3.481955] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.584436] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.771434] systemd-journald[2032]: Received request to flush runtime journal from PID 1 [ 3.901687] Adding 4194300k swap on /mnt/4GB.swap. Priority:-1 extents:8 across:4513788k SS [ 4.380638] using random self ethernet address [ 4.390337] using random host ethernet address [ 4.575417] soctherm: OC ALARM 0x00000001 [ 4.852339] random: crng init done [ 4.855770] random: 7 urandom warning(s) missed due to ratelimiting [ 5.334439] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334461] cpu-throttle-alert cooling device registered. [ 5.334590] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334605] gpu-throttle-alert cooling device registered. [ 5.334754] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334767] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334782] hot-surface-alert cooling device registered. [ 5.544721] Mass Storage Function, version: 2009/09/11 [ 5.544727] LUN: removable file: (no medium) [ 5.551077] using random self ethernet address [ 5.562667] using random host ethernet address [ 5.771555] soctherm: OC ALARM 0x00000001 [ 6.203608] rndis0: HOST MAC 96:57:db:6f:b5:8c [ 6.203675] rndis0: MAC 96:57:db:6f:b5:8d [ 6.205144] usb0: HOST MAC 96:57:db:6f:b5:8e [ 6.205175] usb0: MAC 96:57:db:6f:b5:8f [ 6.205207] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.210414] l4tbr0: port 1(rndis0) entered blocking state [ 6.210418] l4tbr0: port 1(rndis0) entered disabled state [ 6.210610] device rndis0 entered promiscuous mode [ 6.219148] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.225869] l4tbr0: port 2(usb0) entered blocking state [ 6.225873] l4tbr0: port 2(usb0) entered disabled state [ 6.226044] device usb0 entered promiscuous mode [ 6.245996] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.449276] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.450400] eth0: 0xffffff800ac3b000, 48:b0:2d:3d:03:80, IRQ 407 [ 6.512406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.863818] soctherm: OC ALARM 0x00000001 [ 8.160505] soctherm: OC ALARM 0x00000001 [ 8.346879] Bridge firewalling registered [ 8.373698] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.712954] Netfilter messages via NETLINK v0.30. [ 8.715477] ctnetlink v0.93: registering with nfnetlink. [ 8.945384] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.184431] tegradc tegradc.0: unblank [ 9.184444] tegradc tegradc.1: blank - powerdown [ 9.585660] r8168: eth0: link up [ 9.585703] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.950656] soctherm: OC ALARM 0x00000001 [ 10.209865] fuse init (API version 7.26) [ 12.827982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.827991] Bluetooth: BNEP socket layer initialized [ 14.371842] soctherm: OC ALARM 0x00000001 [ 17.298453] soctherm: OC ALARM 0x00000001 [ 28.409067] tegradc tegradc.0: blank - powerdown [ 28.462348] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 28.462351] Extcon AUX1(HDMI) disable [ 28.482758] tegradc tegradc.1: blank - powerdown [ 28.623749] tegradc tegradc.0: blank - powerdown [ 28.623761] tegradc tegradc.0: unblank [ 28.628472] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 28.628563] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 28.629631] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 28.668196] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 28.668198] Extcon AUX1(HDMI) enable [ 28.670483] tegradc tegradc.0: unblank [ 28.670492] tegradc tegradc.1: blank - powerdown [ 31.857770] vdd-fan: disabling [ 31.857775] vdd-usb-vbus: disabling [ 31.857778] vdd-usb-vbus2: disabling [ 31.857790] vddio-sdmmc3-ap: disabling [ 31.857871] avdd-io-edp-1v05: disabling [ 31.857875] vdd-usb-hub-en: disabling [ 32.281166] tegradc tegradc.0: unblank [ 32.281176] tegradc tegradc.1: blank - powerdown [ 32.782730] soctherm: OC ALARM 0x00000001 [ 268.036744] soctherm: OC ALARM 0x00000001 0.407822] Serial: AMBA PL011 UART driver [ 398.030706] soctherm: OC ALARM 0x00000001 [ 1038.036704] soctherm: OC ALARM 0x00000001 ding device 702ef000.adsp to group 33 [ 1.018821] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.018971] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.019577] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7208c11 [ 1.019586] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.021179] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.021287] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.021380] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.021568] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.022150] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.022237] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.022334] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.022420] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.022514] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.022598] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.028670] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.030370] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.032215] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.033501] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.033915] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.035167] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.035374] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.035602] Adding domain tsec-pd to PM domain host1x-pd [ 1.037791] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.038631] tsec 54500000.tsec: initialized [ 1.039971] tsec 54100000.tsecb: initialized [ 1.040681] Adding domain nvdec-pd to PM domain host1x-pd [ 1.044203] nvdec 54480000.nvdec: initialized [ 1.045268] Adding domain vic03-pd to PM domain host1x-pd [ 1.045455] Adding domain msenc-pd to PM domain host1x-pd [ 1.045646] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.049743] falcon 54340000.vic: initialized [ 1.051030] falcon 544c0000.nvenc: initialized [ 1.052353] falcon 54380000.nvjpg: initialized [ 1.056716] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.056772] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.056805] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.056989] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.057078] display board info: id 0x0, fab 0x0 [ 1.057092] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.057096] tegra_cec 70015000.tegra_cec: probed [ 1.057146] generic_infoframe_type: 0x87 [ 1.057294] tegradc tegradc.0: DT parsed successfully [ 1.057342] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.064664] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.070018] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.070719] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.070726] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.071032] kfuse 7000fc00.kfuse: initialized [ 1.071923] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.072710] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.073665] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.073677] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.074065] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.075321] vdd-gpu: applied init 1000000uV constraint [ 1.075329] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.075703] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.079275] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.079372] No Device Node present for smmu client: serial8250 !! [ 1.079382] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.079418] iommu: Adding device serial8250 to group 35 [ 1.081798] console [ttyS0] disabled [ 1.081870] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.081961] console [ttyS0] enabled [ 1.082893] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.083179] serial-tegra 70006200.serial: RX in PIO mode [ 1.083263] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.084237] [drm] Initialized [ 1.094883] brd: module loaded [ 1.097526] tegradc tegradc.0: probed [ 1.098365] Console: switching to colour frame buffer device 128x48 [ 1.098428] tegradc tegradc.0: fb registered [ 1.100811] loop: module loaded [ 1.100894] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.101022] tegra_profiler: auth: init [ 1.102270] THERMAL EST: found 2 subdevs [ 1.102279] THERMAL EST num_resources: 0 [ 1.102285] [THERMAL EST subdev 0] [ 1.102295] [THERMAL EST subdev 1] [ 1.102757] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.102762] THERMAL EST: thz register success. [ 1.102932] THERMAL EST: end of probe, return err: 0 [ 1.104180] sd: No Scsi addr parsed to reserve index [ 1.104220] hisi_sas: driver version v1.6 [ 1.107064] tegradc tegradc.0: nominal-pclk:64995840 parent:64994921 div:1.0 pclk:64994921 64345842~70845422 [ 1.107172] tegradc tegradc.0: hdmi: tmds rate:64995K prod-setting:prod_c_hdmi_54m_75m [ 1.108343] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.109467] tegra-qspi 70410000.spi: Prod settings list not found [ 1.110683] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.110694] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.113749] libphy: Fixed MDIO Bus: probed [ 1.114568] tun: Universal TUN/TAP device driver, 1.6 [ 1.114573] tun: (C) 1999-2004 Max Krasnyansky [ 1.115646] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.115653] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.115707] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.115711] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.115759] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.115763] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.115809] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.115814] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.116984] PPP generic driver version 2.4.2 [ 1.117190] PPP BSD Compression module registered [ 1.117198] PPP Deflate Compression module registered [ 1.117238] PPP MPPE Compression module registered [ 1.117245] NET: Registered protocol family 24 [ 1.117328] usbcore: registered new interface driver r8152 [ 1.117376] usbcore: registered new interface driver asix [ 1.117428] usbcore: registered new interface driver ax88179_178a [ 1.117468] usbcore: registered new interface driver cdc_ether [ 1.117507] usbcore: registered new interface driver net1080 [ 1.117550] usbcore: registered new interface driver cdc_subset [ 1.117651] usbcore: registered new interface driver zaurus [ 1.117716] usbcore: registered new interface driver cdc_ncm [ 1.117917] VFIO - User Level meta-driver version: 0.3 [ 1.119221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.119239] ehci-pci: EHCI PCI platform driver [ 1.119290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.119303] ohci-pci: OHCI PCI platform driver [ 1.119345] ohci-platform: OHCI generic platform driver [ 1.122627] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.123251] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.124454] tegra-xusb 70090000.xusb: extcon 0: ffffffc0fa5d2c00 id [ 1.127375] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.127428] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.127456] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.128242] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.128306] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.128520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.128527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.128532] usb usb1: Product: xHCI Host Controller [ 1.128537] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.128542] usb usb1: SerialNumber: 70090000.xusb [ 1.129173] hub 1-0:1.0: USB hub found [ 1.129212] hub 1-0:1.0: 5 ports detected [ 1.129907] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.129918] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.130041] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.130144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.130151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.130157] usb usb2: Product: xHCI Host Controller [ 1.130162] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.130166] usb usb2: SerialNumber: 70090000.xusb [ 1.130613] hub 2-0:1.0: USB hub found [ 1.130646] hub 2-0:1.0: 4 ports detected [ 1.131041] usbcore: registered new interface driver uas [ 1.131130] usbcore: registered new interface driver usb-storage [ 1.131244] usbcore: registered new interface driver usbserial [ 1.135625] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.137237] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.137251] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.137269] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.137281] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.137308] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.137936] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.137943] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.138223] mousedev: PS/2 mouse device common for all mice [ 1.138340] usbcore: registered new interface driver xpad [ 1.143821] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.143828] Extcon AUX1(HDMI) enable [ 1.144696] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.144768] tegradc tegradc.1: No lt-data, using default setting [ 1.144800] tegradc tegradc.1: No hpd-gpio in DT [ 1.144834] tegradc tegradc.1: DT parsed successfully [ 1.144884] tegradc tegradc.1: Display dc.ffffff800ad40000 registered with id=1 [ 1.146236] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.155946] tegradc tegradc.1: probed [ 1.156316] tegradc tegradc.1: fb registered [ 1.159496] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.159504] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.159513] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.159527] tegradc tegradc.1: blank - powerdown [ 1.159544] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.159548] Extcon DP: HPD disabled [ 1.159551] hpd: hpd_switch 0 [ 1.159556] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.159565] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.159572] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.233698] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.237856] usb usb2: usb_suspend_both: status 0 [ 1.266856] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.269405] rtc rtc1: alarm rtc device [ 1.269426] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.269457] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.270144] i2c /dev entries driver [ 1.272414] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.272915] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.272924] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.273862] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.277295] tegradc tegradc.0: blank - powerdown [ 1.297191] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.297283] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.297392] imx219 7-0010: board setup failed [ 1.297458] imx219: probe of 7-0010 failed with error -121 [ 1.298090] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.321379] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.321466] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.321541] imx219 8-0010: board setup failed [ 1.321629] imx219: probe of 8-0010 failed with error -121 [ 1.323088] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.326884] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.326886] Extcon AUX1(HDMI) disable [ 1.327000] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.327005] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.327319] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.327332] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.327340] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.327480] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.327490] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.327496] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.327644] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.327653] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.327658] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.327832] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.328397] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.328443] tegra_aotag tegra-aotag: Invalid temp readout [ 1.328463] tegra_aotag tegra-aotag: Invalid temp readout [ 1.328479] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.328487] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.329422] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.329437] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.329647] tegra_aotag tegra-aotag: Invalid temp readout [ 1.329669] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.330099] parse_throttle_dt_data: Num cap clks = 6 [ 1.330103] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.330109] parse_throttle_dt_data: clk=gpu type=4 [ 1.330132] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.330151] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.330169] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.330172] parse_throttle_dt_data: clk=emc type=3 [ 1.330544] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.330673] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.330813] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.331489] FAN dev name: pwm-fan [ 1.331534] FAN:gpio request success. [ 1.331576] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.331821] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.331942] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.331950] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.332026] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.332031] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.332036] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.332040] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.332044] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.332048] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.332052] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.332056] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.332060] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.332064] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.334426] device-mapper: uevent: version 1.0.3 [ 1.334841] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.337438] tegra210-cpufreq cpufreq: probe()...completed [ 1.338253] sdhci: Secure Digital Host Controller Interface driver [ 1.338254] sdhci: Copyright(c) Pierre Ossman [ 1.338256] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.338763] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.339141] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.339266] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.346335] tegra-se 70012000.se: tegra_se_probe: complete [ 1.346962] hidraw: raw HID events driver (C) Jiri Kosina [ 1.348255] usbcore: registered new interface driver usbhid [ 1.348257] usbhid: USB HID core driver [ 1.351580] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.351759] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.354021] nvpmodel: initialized successfully [ 1.355054] usbcore: registered new interface driver snd-usb-audio [ 1.355110] No Device Node present for smmu client: snd-soc-dummy !! [ 1.355114] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.355131] iommu: Adding device snd-soc-dummy to group 36 [ 1.356578] tegradc tegradc.0: unblank [ 1.362707] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 1.362760] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 1.363797] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.367591] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.374595] OPE platform probe [ 1.374684] OPE platform probe successful [ 1.374940] OPE platform probe [ 1.375018] OPE platform probe successful [ 1.385816] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.398568] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.398570] Extcon AUX1(HDMI) enable [ 1.400346] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.400480] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.400608] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.400735] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.400864] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.400992] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.401124] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.401253] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.401411] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.401549] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.413358] u32 classifier [ 1.413359] Actions configured [ 1.413428] Initializing XFRM netlink socket [ 1.414045] tegradc tegradc.0: sync windows ret = 246 [ 1.414175] NET: Registered protocol family 10 [ 1.414843] NET: Registered protocol family 17 [ 1.414854] NET: Registered protocol family 15 [ 1.414925] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.414971] Bluetooth: RFCOMM socket layer initialized [ 1.414980] Bluetooth: RFCOMM ver 1.11 [ 1.414985] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.414989] Bluetooth: HIDP socket layer initialized [ 1.415006] 9pnet: Installing 9P2000 support [ 1.415042] Key type dns_resolver registered [ 1.415396] Registered cp15_barrier emulation handler [ 1.415402] Registered setend emulation handler [ 1.417807] registered taskstats version 1 [ 1.418339] Adding domain ve2-pd to PM domain host1x-pd [ 1.418594] Adding domain ve-pd to PM domain host1x-pd [ 1.420676] isp 54600000.isp: initialized [ 1.421675] isp 54680000.isp: initialized [ 1.432247] last reset is due to software reset [ 1.432250] KERNEL: PMC reset status reg: 0x3 [ 1.432314] BL: PMC reset status reg: 0x3 [ 1.432315] BL: PMIC poweroff Event Recorder: 0x0 [ 1.433871] clk_cbus_recalc_rate: no gbus parent [ 1.433876] clk_cbus_round_rate: no gbus parent [ 1.433878] clk_cbus_round_rate: no gbus parent [ 1.433884] clk_cbus_recalc_rate: no gbus parent [ 1.433980] clk_cbus_recalc_rate: no gbus parent [ 1.433983] clk_cbus_round_rate: no gbus parent [ 1.433984] clk_cbus_round_rate: no gbus parent [ 1.433987] clk_cbus_recalc_rate: no gbus parent [ 1.434655] tegra_dvfs: GPU-cap: registered [ 1.434712] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.434714] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.434716] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.436178] tegra_dvfs: vdd-gpu-vts: registered [ 1.436905] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.437591] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.438128] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.457599] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.457603] Extcon HDMI: HPD enabled [ 1.457620] tegradc tegradc.0: hdmi: plugged [ 1.469594] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.470871] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:44:40 UTC (946691080) [ 1.471884] vi 54080000.vi: vi_probe: ++ [ 1.473444] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.474575] vi 54080000.vi: initialized [ 1.476639] vi 54080000.vi: subdev nvcsi--2 bound [ 1.476745] vi 54080000.vi: subdev nvcsi--1 bound [ 1.477537] Disable partitions left on by BL [ 1.477540] disb [ 1.477607] bwmgr: missing cdev-type property [ 1.477700] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.477707] DRAM derating cdev registered. [ 1.478651] ALSA device list: [ 1.478655] #0: tegra-hda at 0x70038000 irq 83 [ 1.478657] #1: tegra-snd-t210ref-mobile-rt565x [ 1.481972] Freeing unused kernel memory: 8640K [ 1.498791] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.498797] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.498801] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.498804] usb 1-2: Manufacturer: Generic [ 1.499705] hub 1-2:1.0: USB hub found [ 1.500292] hub 1-2:1.0: 4 ports detected [ 1.506518] Root device found: mmcblk0p1 [ 1.584727] mmc0: Applying tuning correction [ 1.584743] mmc0: Tap value after applying correction 60 [ 1.584762] mmc0: hw tuning done ... [ 1.584797] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 1.585213] mmcblk0: mmc0:aaaa SD64G 59.5 GiB [ 1.590039] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.610112] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.638586] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.638591] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.638594] usb 2-1: Product: 4-Port USB 3.1 Hub [ 1.638596] usb 2-1: Manufacturer: Generic [ 1.641922] hub 2-1:1.0: USB hub found [ 1.642751] hub 2-1:1.0: 4 ports detected [ 1.711352] Found dev node: /dev/mmcblk0p1 [ 1.793602] usb 2-1: usb_suspend_both: status 0 [ 1.793756] usb usb2: usb_suspend_both: status 0 [ 1.797654] usb 1-2.2: new high-speed USB device number 3 using tegra-xusb [ 1.819416] usb 1-2.2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.819422] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.819425] usb 1-2.2: Product: USB2.0 Hub [ 1.820543] hub 1-2.2:1.0: USB hub found [ 1.820853] hub 1-2.2:1.0: 4 ports detected [ 1.880223] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.905598] usb 1-2.4: new low-speed USB device number 4 using tegra-xusb [ 1.929990] usb 1-2.4: New USB device found, idVendor=093a, idProduct=2510 [ 1.929996] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.930000] usb 1-2.4: Product: USB Optical Mouse [ 1.930004] usb 1-2.4: Manufacturer: PixArt [ 1.933145] input: PixArt USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.0/0003:093A:2510.0001/input/input2 [ 1.933387] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-70090000.xusb-2.4/input0 [ 2.065660] tegra_cec 70015000.tegra_cec: physical address: 20:00. [ 2.109595] usb 1-2.2.1: new low-speed USB device number 5 using tegra-xusb [ 2.130278] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.130281] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.156100] usb 1-2.2.1: New USB device found, idVendor=04d9, idProduct=0006 [ 2.156104] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.156107] usb 1-2.2.1: Product: RPI Wired Keyboard 4 [ 2.156109] usb 1-2.2.1: Manufacturer: [ 2.168437] input: RPI Wired Keyboard 4 as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:04D9:0006.0002/input/input3 [ 2.226066] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Keyboard [ RPI Wired Keyboard 4] on usb-70090000.xusb-2.2.1/input0 [ 2.237350] input: RPI Wired Keyboard 4 as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:04D9:0006.0003/input/input4 [ 2.290078] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.292198] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.293906] hid-generic 0003:04D9:0006.0003: input,hidraw2: USB HID v1.11 Device [ RPI Wired Keyboard 4] on usb-70090000.xusb-2.2.1/input1 [ 2.396602] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.396607] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.396610] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.396614] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.396617] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.396637] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.396695] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.396829] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.396930] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.396953] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.396982] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.397002] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.397134] pci 0000:01:00.0: supports D1 D2 [ 2.397137] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.409714] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.409738] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.409742] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.409747] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.409764] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.409779] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.409785] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.409789] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.409793] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.410003] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.410006] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.410011] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.410083] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.410243] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.410259] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.424639] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.424701] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:3d:03:80 from device tree [ 2.425095] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.425108] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.815303] EXT4-fs (mmcblk0p1): 10 orphan inodes deleted [ 2.815306] EXT4-fs (mmcblk0p1): recovery complete [ 2.916213] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.918253] Rootfs mounted over mmcblk0p1 [ 2.936721] Switching from initrd to actual rootfs [ 3.102241] systemd[1]: System time before build time, advancing clock. [ 3.121784] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.133768] cgroup: cgroup2: unknown option "nsdelegate" [ 3.159205] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.159981] systemd[1]: Detected architecture arm64. [ 3.182626] systemd[1]: Set hostname to . [ 3.287842] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.287852] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.425159] random: systemd: uninitialized urandom read (16 bytes read) [ 3.426995] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.427122] random: systemd: uninitialized urandom read (16 bytes read) [ 3.427144] systemd[1]: Reached target User and Group Name Lookups. [ 3.427173] random: systemd: uninitialized urandom read (16 bytes read) [ 3.427291] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.429087] systemd[1]: Created slice System Slice. [ 3.429323] systemd[1]: Listening on Syslog Socket. [ 3.481955] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.584436] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.771434] systemd-journald[2032]: Received request to flush runtime journal from PID 1 [ 3.901687] Adding 4194300k swap on /mnt/4GB.swap. Priority:-1 extents:8 across:4513788k SS [ 4.380638] using random self ethernet address [ 4.390337] using random host ethernet address [ 4.575417] soctherm: OC ALARM 0x00000001 [ 4.852339] random: crng init done [ 4.855770] random: 7 urandom warning(s) missed due to ratelimiting [ 5.334439] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334461] cpu-throttle-alert cooling device registered. [ 5.334590] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334605] gpu-throttle-alert cooling device registered. [ 5.334754] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334767] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.334782] hot-surface-alert cooling device registered. [ 5.544721] Mass Storage Function, version: 2009/09/11 [ 5.544727] LUN: removable file: (no medium) [ 5.551077] using random self ethernet address [ 5.562667] using random host ethernet address [ 5.771555] soctherm: OC ALARM 0x00000001 [ 6.203608] rndis0: HOST MAC 96:57:db:6f:b5:8c [ 6.203675] rndis0: MAC 96:57:db:6f:b5:8d [ 6.205144] usb0: HOST MAC 96:57:db:6f:b5:8e [ 6.205175] usb0: MAC 96:57:db:6f:b5:8f [ 6.205207] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.210414] l4tbr0: port 1(rndis0) entered blocking state [ 6.210418] l4tbr0: port 1(rndis0) entered disabled state [ 6.210610] device rndis0 entered promiscuous mode [ 6.219148] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.225869] l4tbr0: port 2(usb0) entered blocking state [ 6.225873] l4tbr0: port 2(usb0) entered disabled state [ 6.226044] device usb0 entered promiscuous mode [ 6.245996] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.449276] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.450400] eth0: 0xffffff800ac3b000, 48:b0:2d:3d:03:80, IRQ 407 [ 6.512406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.863818] soctherm: OC ALARM 0x00000001 [ 8.160505] soctherm: OC ALARM 0x00000001 [ 8.346879] Bridge firewalling registered [ 8.373698] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.712954] Netfilter messages via NETLINK v0.30. [ 8.715477] ctnetlink v0.93: registering with nfnetlink. [ 8.945384] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.184431] tegradc tegradc.0: unblank [ 9.184444] tegradc tegradc.1: blank - powerdown [ 9.585660] r8168: eth0: link up [ 9.585703] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.950656] soctherm: OC ALARM 0x00000001 [ 10.209865] fuse init (API version 7.26) [ 12.827982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.827991] Bluetooth: BNEP socket layer initialized [ 14.371842] soctherm: OC ALARM 0x00000001 [ 17.298453] soctherm: OC ALARM 0x00000001 [ 28.409067] tegradc tegradc.0: blank - powerdown [ 28.462348] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 28.462351] Extcon AUX1(HDMI) disable [ 28.482758] tegradc tegradc.1: blank - powerdown [ 28.623749] tegradc tegradc.0: blank - powerdown [ 28.623761] tegradc tegradc.0: unblank [ 28.628472] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 28.628563] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 28.629631] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 28.668196] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 28.668198] Extcon AUX1(HDMI) enable [ 28.670483] tegradc tegradc.0: unblank [ 28.670492] tegradc tegradc.1: blank - powerdown [ 31.857770] vdd-fan: disabling [ 31.857775] vdd-usb-vbus: disabling [ 31.857778] vdd-usb-vbus2: disabling [ 31.857790] vddio-sdmmc3-ap: disabling [ 31.857871] avdd-io-edp-1v05: disabling [ 31.857875] vdd-usb-hub-en: disabling [ 32.281166] tegradc tegradc.0: unblank [ 32.281176] tegradc tegradc.1: blank - powerdown [ 32.782730] soctherm: OC ALARM 0x00000001 [ 268.036744] soctherm: OC ALARM 0x00000001 0.407822] Serial: AMBA PL011 UART driver [ 398.030706] soctherm: OC ALARM 0x00000001 [ 1038.036704] soctherm: OC ALARM 0x00000001