[BEGIN] 2022/10/20 15:42:08
[2022/10/20 15:42:08] Disconnected from remote host(luk-adu510) at 15:42:07.
Type `help' to learn how to use Xshell prompt.
[E:\~]$ 
Connecting to COM3...
[2022/10/20 15:42:08] Connected.
[2022/10/20 15:42:08] 
[2022/10/20 15:42:14] ÿ
[2022/10/20 15:42:14] [0015.178] I> MB1 (version: 0.23.0.0-t234-54845784-92215740)
[2022/10/20 15:42:14] [0015.183] I> t234-A01-0-Silicon (0x12347) Prod
[2022/10/20 15:42:14] [0015.187] I> Boot-mode : BPMP Diagnostic
[2022/10/20 15:42:14] [0015.191] I> Emulation: 
[2022/10/20 15:42:14] [0015.193] I> Entry timestamp: 0x00000000
[2022/10/20 15:42:14] [0015.197] I> last_boot_error: 0x0
[2022/10/20 15:42:14] [0015.200] I> BR-BCT: preprod_dev_sign: 0
[2022/10/20 15:42:14] [0015.204] I> rst_source: 0x0, rst_level: 0x0
[2022/10/20 15:42:14] [0015.208] I> Task: Crypto init (0x5001c0d9)
[2022/10/20 15:42:14] [0015.212] I> Task: Secure debug controls (0x5000cb19)
[2022/10/20 15:42:14] [0015.217] I> Task: strap war set (0x5000b739)
[2022/10/20 15:42:14] [0015.221] I> strap value(0x4000001) set to 0x4000001
[2022/10/20 15:42:14] [0015.226] I> Task: Program NV master stream id (0x5000cad1)
[2022/10/20 15:42:14] [0015.232] I> Task: Verify boot mode (0xd482021)
[2022/10/20 15:42:14] [0015.238] I> Task: Alias fuses (0x50010749)
[2022/10/20 15:42:14] [0015.242] E> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[2022/10/20 15:42:14] [0015.249] I> Task: Print SKU type (0x5000fba9)
[2022/10/20 15:42:14] [0015.253] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[2022/10/20 15:42:14] [0015.258] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[2022/10/20 15:42:14] [0015.263] I> FUSE_OPT_TPC_DISABLE = 0x00000020
[2022/10/20 15:42:14] [0015.267] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[2022/10/20 15:42:14] [0015.271] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[2022/10/20 15:42:14] [0015.275] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[2022/10/20 15:42:14] [0015.280] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[2022/10/20 15:42:14] [0015.284] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[2022/10/20 15:42:14] [0015.288] I> FUSE_SKU_INFO_0 = 0xd2
[2022/10/20 15:42:14] [0015.291] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[2022/10/20 15:42:14] [0015.295] I> FUSE_PACKAGE_INFO_0 = 0x2
[2022/10/20 15:42:14] [0015.299] I> SKU: Prod
[2022/10/20 15:42:14] [0015.301] I> Task: Boost clocks (0x50013db1)
[2022/10/20 15:42:14] [0015.305] I> Initializing PLLC2 for AXI_CBB.
[2022/10/20 15:42:14] [0015.309] I> AXI_CBB : src = 35, divisor = 0
[2022/10/20 15:42:14] [0015.313] I> Task: Voltage monitor (0x50013dbd)
[2022/10/20 15:42:14] [0015.318] I> VMON: Vmon re-calibration and fine tuning done
[2022/10/20 15:42:14] [0015.323] I> Task: UPHY init (0x5000da39)
[2022/10/20 15:42:14] [0015.328] E> UPHY: UPHY lane info table is empty in MB1 BCT.
[2022/10/20 15:42:14] [0015.333] I> Task: Boot device init (0x50000a3d)
[2022/10/20 15:42:14] [0015.338] I> Boot_device: RCM
[2022/10/20 15:42:14] [0015.341] I> USB configuration success
[2022/10/20 15:42:14] [0015.344] I> Task: TSC init (0x5001ed35)
[2022/10/20 15:42:14] [0015.348] I> Task: Enable WDT 5th expiry (0x5001f929)
[2022/10/20 15:42:14] [0015.353] I> Task: Disable WDT globally (0x5001f965)
[2022/10/20 15:42:14] [0015.358] I> Task: I2C register (0x50000a31)
[2022/10/20 15:42:14] [0015.362] I> Task: Reset FSI (0x50013db9)
[2022/10/20 15:42:14] [0015.366] I> Task: Enable clock-mon (0x5001ed25)
[2022/10/20 15:42:14] [0015.381] I> FMON: Fmon re-programming done
[2022/10/20 15:42:14] [0015.385] I> Task: MB1 fixed firewalls (0x5001e55d)
[2022/10/20 15:42:14] [0015.393] I> Task: Load MB2/Applet/FSKP (0x5000d451)
[2022/10/20 15:42:14] [0015.398] I> Loading MB2 Applet
[2022/10/20 15:42:14] [0015.401] I> Scratch RSV109: 0x00000000    active chain: 0
[2022/10/20 15:42:14] [0015.407] I> Slot: 0
[2022/10/20 15:42:14] [0015.409] I> Binary[21] block-0 (partition size: 0x50000)
[2022/10/20 15:42:14] [0015.414] I>  get_binary_info: Binary name: MB2-Applet
[2022/10/20 15:42:14] [0015.419] I> Size of crypto header is 8192
[2022/10/20 15:42:14] [0015.423] I> BCH load address is : 0x4004e000
[2022/10/20 15:42:14] [0015.427] I> Size of crypto header is 8192
[2022/10/20 15:42:14] [0015.431] I> BCH of MB2-Applet read from storage
[2022/10/20 15:42:14] [0015.436] I> BCH address is : 0x4004e000
[2022/10/20 15:42:14] [0015.440] I> MB2-Applet header integrity check is success
[2022/10/20 15:42:14] [0015.445] I> Binary magic in BCH component 0 is MB2A
[2022/10/20 15:42:14] [0015.450] I> component binary type is 21
[2022/10/20 15:42:14] [0015.453] I> Size of crypto header is 8192
[2022/10/20 15:42:14] [0015.466] I> MB2-Applet binary is read from storage
[2022/10/20 15:42:14] [0015.472] I> MB2-Applet binary integrity check is success
[2022/10/20 15:42:14] [0015.477] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b80)
[2022/10/20 15:42:14] [0015.484] I> Task: Map CCPLEX SHARED carveout (0x5000d521)
[2022/10/20 15:42:14] [0015.489] I> Task: Prepare MB2 params (0x5000d5dd)
[2022/10/20 15:42:14] [0015.494] I> MB2-params @ 0x40060000
[2022/10/20 15:42:14] [0015.498] I> Region(2) already mapped
[2022/10/20 15:42:14] [0015.501] E> Failed to map carveout: 50
[2022/10/20 15:42:14] [0015.505] I> BR-BCT Boot Chain Fields
[2022/10/20 15:42:14] [0015.509] I> 	 u32_non_gpio_select_boot_chain  : 0
[2022/10/20 15:42:14] [0015.513] I> 	 u32_num_boot_chains             : 0
[2022/10/20 15:42:14] [0015.518] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[2022/10/20 15:42:14] [0015.523] I> Task: Misc NV security settings (0x5000ced5)
[2022/10/20 15:42:14] [0015.528] I> NVDEC sticky bits programming done
[2022/10/20 15:42:14] [0015.533] I> Task: Disable/Reload WDT (0x5001f991)
[2022/10/20 15:42:14] [0015.537] I> Programmed SLCG global override := 0x0
[2022/10/20 15:42:14] [0015.542] I> MB1: MSS reconfig completed
[2022/10/20 15:42:14] I> Applet (version: 0.0.0.0-t234-54845784-dee653cf)
[2022/10/20 15:42:14] I> t234-A01-0-Silicon (0x12347)
[2022/10/20 15:42:14] I> Emulation: 
[2022/10/20 15:42:14] I> Entry timestamp: 0xffffffff
[2022/10/20 15:42:14] I> Task: Pinmux init (0x4000062d)
[2022/10/20 15:42:14] I> Task: Boot device init (0x400012e5)
[2022/10/20 15:42:14] I> Applet do storage init
[2022/10/20 15:42:14] I> Boot_device: QSPI_FLASH instance: 0
[2022/10/20 15:42:14] I> Qspi clock source : clk_m
[2022/10/20 15:42:14] I> QSPI-0l initialized successfully
[2022/10/20 15:42:14] I> sdmmc DDR50 mode
[2022/10/20 15:42:14] I> sdmmc bdev is already initialized
[2022/10/20 15:42:14] E> Unknown device 7
[2022/10/20 15:42:14] E> Unknown device 8
[2022/10/20 15:42:14] I> Task: Partition Manager Init (0x40002d1d)
[2022/10/20 15:42:14] I> Found 57 partitions in QSPI_FLASH (instance 0)
[2022/10/20 15:42:14] W> Cannot find any partition table for 00000003
[2022/10/20 15:42:14]  > PARTITION_MANAGER: Failed to publish partition.
[2022/10/20 15:42:14] I> Found 11 partitions in SDMMC_USER (instance 3)
[2022/10/20 15:42:14] I> Task: I2C register (0x400006a5)
[2022/10/20 15:42:14] I> Task: Register exit handlers (0x400005f5)
[2022/10/20 15:42:14] I> Task: Enter 3p server (0x400018e1)
[2022/10/20 15:42:14] I> USB configuration success
[2022/10/20 15:42:15] I> Populate chip info
[2022/10/20 15:42:15] I> RAM_CODE 0x4000001
[2022/10/20 15:42:15] I> Populate eeprom info
[2022/10/20 15:42:15] I> Populate eeprom info for module cvm
[2022/10/20 15:42:15] E> I2C: Timeout while polling for transfer complete. Last value 0x00000002.
[2022/10/20 15:42:15] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[2022/10/20 15:42:15] E> I2C_DEV: Failed to send register address 0x00000000.
[2022/10/20 15:42:15] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.
[2022/10/20 15:42:15] E> eeprom: Failed to read I2C slave device
[2022/10/20 15:42:15] E> NV3P_SERVER: Failed to get eeprom handle for cvm from eeprom manager.
[2022/10/20 15:42:15] E> NV3P_SERVER: Could not read eeprom for module cvm.
[2022/10/20 15:45:19] ÿ
[2022/10/20 15:45:19] [0004.156] I> MB1 (version: 0.23.0.0-t234-54845784-92215740)
[2022/10/20 15:45:19] [0004.161] I> t234-A01-0-Silicon (0x12347) Prod
[2022/10/20 15:45:19] [0004.165] I> Boot-mode : BPMP Diagnostic
[2022/10/20 15:45:19] [0004.169] I> Emulation: 
[2022/10/20 15:45:19] [0004.171] I> Entry timestamp: 0x00000000
[2022/10/20 15:45:19] [0004.175] I> last_boot_error: 0x0
[2022/10/20 15:45:19] [0004.178] I> BR-BCT: preprod_dev_sign: 0
[2022/10/20 15:45:19] [0004.182] I> rst_source: 0x0, rst_level: 0x0
[2022/10/20 15:45:19] [0004.186] I> Task: Crypto init (0x5001c0d9)
[2022/10/20 15:45:19] [0004.190] I> Task: Secure debug controls (0x5000cb19)
[2022/10/20 15:45:19] [0004.195] I> Task: strap war set (0x5000b739)
[2022/10/20 15:45:19] [0004.199] I> strap value(0x4000001) set to 0x4000001
[2022/10/20 15:45:19] [0004.204] I> Task: Program NV master stream id (0x5000cad1)
[2022/10/20 15:45:19] [0004.210] I> Task: Verify boot mode (0xd482021)
[2022/10/20 15:45:19] [0004.216] I> Task: Alias fuses (0x50010749)
[2022/10/20 15:45:19] [0004.220] E> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[2022/10/20 15:45:19] [0004.227] I> Task: Print SKU type (0x5000fba9)
[2022/10/20 15:45:19] [0004.231] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[2022/10/20 15:45:19] [0004.236] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[2022/10/20 15:45:19] [0004.240] I> FUSE_OPT_TPC_DISABLE = 0x00000020
[2022/10/20 15:45:19] [0004.245] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[2022/10/20 15:45:19] [0004.249] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[2022/10/20 15:45:19] [0004.253] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[2022/10/20 15:45:19] [0004.257] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[2022/10/20 15:45:19] [0004.262] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[2022/10/20 15:45:19] [0004.266] I> FUSE_SKU_INFO_0 = 0xd2
[2022/10/20 15:45:19] [0004.269] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[2022/10/20 15:45:19] [0004.273] I> FUSE_PACKAGE_INFO_0 = 0x2
[2022/10/20 15:45:19] [0004.277] I> SKU: Prod
[2022/10/20 15:45:19] [0004.279] I> Task: Boost clocks (0x50013db1)
[2022/10/20 15:45:19] [0004.283] I> Initializing PLLC2 for AXI_CBB.
[2022/10/20 15:45:19] [0004.287] I> AXI_CBB : src = 35, divisor = 0
[2022/10/20 15:45:19] [0004.291] I> Task: Voltage monitor (0x50013dbd)
[2022/10/20 15:45:19] [0004.296] I> VMON: Vmon re-calibration and fine tuning done
[2022/10/20 15:45:19] [0004.301] I> Task: UPHY init (0x5000da39)
[2022/10/20 15:45:19] [0004.306] E> UPHY: UPHY lane info table is empty in MB1 BCT.
[2022/10/20 15:45:19] [0004.311] I> Task: Boot device init (0x50000a3d)
[2022/10/20 15:45:19] [0004.316] I> Boot_device: RCM
[2022/10/20 15:45:19] [0004.319] I> USB configuration success
[2022/10/20 15:45:19] [0004.322] I> Task: TSC init (0x5001ed35)
[2022/10/20 15:45:19] [0004.326] I> Task: Enable WDT 5th expiry (0x5001f929)
[2022/10/20 15:45:19] [0004.331] I> Task: Disable WDT globally (0x5001f965)
[2022/10/20 15:45:19] [0004.336] I> Task: I2C register (0x50000a31)
[2022/10/20 15:45:19] [0004.340] I> Task: Reset FSI (0x50013db9)
[2022/10/20 15:45:19] [0004.344] I> Task: Enable clock-mon (0x5001ed25)
[2022/10/20 15:45:19] [0004.359] I> FMON: Fmon re-programming done
[2022/10/20 15:45:19] [0004.363] I> Task: MB1 fixed firewalls (0x5001e55d)
[2022/10/20 15:45:19] [0004.371] I> Task: Load MB2/Applet/FSKP (0x5000d451)
[2022/10/20 15:45:19] [0004.376] I> Loading MB2 Applet
[2022/10/20 15:45:19] [0004.379] I> Scratch RSV109: 0x00000000    active chain: 0
[2022/10/20 15:45:19] [0004.385] I> Slot: 0
[2022/10/20 15:45:19] [0004.387] I> Binary[21] block-0 (partition size: 0x50000)
[2022/10/20 15:45:19] [0004.392] I>  get_binary_info: Binary name: MB2-Applet
[2022/10/20 15:45:19] [0004.397] I> Size of crypto header is 8192
[2022/10/20 15:45:19] [0004.401] I> BCH load address is : 0x4004e000
[2022/10/20 15:45:19] [0004.405] I> Size of crypto header is 8192
[2022/10/20 15:45:19] [0004.409] I> BCH of MB2-Applet read from storage
[2022/10/20 15:45:19] [0004.414] I> BCH address is : 0x4004e000
[2022/10/20 15:45:19] [0004.417] I> MB2-Applet header integrity check is success
[2022/10/20 15:45:19] [0004.423] I> Binary magic in BCH component 0 is MB2A
[2022/10/20 15:45:19] [0004.428] I> component binary type is 21
[2022/10/20 15:45:19] [0004.431] I> Size of crypto header is 8192
[2022/10/20 15:45:19] [0004.444] I> MB2-Applet binary is read from storage
[2022/10/20 15:45:19] [0004.450] I> MB2-Applet binary integrity check is success
[2022/10/20 15:45:19] [0004.455] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b80)
[2022/10/20 15:45:19] [0004.462] I> Task: Map CCPLEX SHARED carveout (0x5000d521)
[2022/10/20 15:45:19] [0004.467] I> Task: Prepare MB2 params (0x5000d5dd)
[2022/10/20 15:45:19] [0004.472] I> MB2-params @ 0x40060000
[2022/10/20 15:45:19] [0004.476] I> Region(2) already mapped
[2022/10/20 15:45:19] [0004.479] E> Failed to map carveout: 50
[2022/10/20 15:45:19] [0004.483] I> BR-BCT Boot Chain Fields
[2022/10/20 15:45:19] [0004.487] I> 	 u32_non_gpio_select_boot_chain  : 0
[2022/10/20 15:45:19] [0004.491] I> 	 u32_num_boot_chains             : 0
[2022/10/20 15:45:19] [0004.496] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[2022/10/20 15:45:19] [0004.501] I> Task: Misc NV security settings (0x5000ced5)
[2022/10/20 15:45:19] [0004.507] I> NVDEC sticky bits programming done
[2022/10/20 15:45:19] [0004.511] I> Task: Disable/Reload WDT (0x5001f991)
[2022/10/20 15:45:19] [0004.516] I> Programmed SLCG global override := 0x0
[2022/10/20 15:45:19] [0004.520] I> MB1: MSS reconfig completed
[2022/10/20 15:45:19] I> Applet (version: 0.0.0.0-t234-54845784-dee653cf)
[2022/10/20 15:45:19] I> t234-A01-0-Silicon (0x12347)
[2022/10/20 15:45:19] I> Emulation: 
[2022/10/20 15:45:19] I> Entry timestamp: 0xffffffff
[2022/10/20 15:45:19] I> Task: Pinmux init (0x4000062d)
[2022/10/20 15:45:19] I> Task: Boot device init (0x400012e5)
[2022/10/20 15:45:19] I> Applet do storage init
[2022/10/20 15:45:19] I> Boot_device: QSPI_FLASH instance: 0
[2022/10/20 15:45:19] I> Qspi clock source : clk_m
[2022/10/20 15:45:19] I> QSPI-0l initialized successfully
[2022/10/20 15:45:19] I> sdmmc DDR50 mode
[2022/10/20 15:45:19] I> sdmmc bdev is already initialized
[2022/10/20 15:45:19] E> Unknown device 7
[2022/10/20 15:45:19] E> Unknown device 8
[2022/10/20 15:45:19] I> Task: Partition Manager Init (0x40002d1d)
[2022/10/20 15:45:19] I> Found 57 partitions in QSPI_FLASH (instance 0)
[2022/10/20 15:45:19] W> Cannot find any partition table for 00000003
[2022/10/20 15:45:19]  > PARTITION_MANAGER: Failed to publish partition.
[2022/10/20 15:45:19] I> Found 11 partitions in SDMMC_USER (instance 3)
[2022/10/20 15:45:19] I> Task: I2C register (0x400006a5)
[2022/10/20 15:45:19] I> Task: Register exit handlers (0x400005f5)
[2022/10/20 15:45:19] I> Task: Enter 3p server (0x400018e1)
[2022/10/20 15:45:19] I> USB configuration success
[2022/10/20 15:45:19] I> Populate chip info
[2022/10/20 15:45:19] I> RAM_CODE 0x4000001
[2022/10/20 15:45:19] I> Populate eeprom info
[2022/10/20 15:45:19] I> Populate eeprom info for module cvm
[2022/10/20 15:45:19] E> I2C: Timeout while polling for transfer complete. Last value 0x00000002.
[2022/10/20 15:45:19] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[2022/10/20 15:45:19] E> I2C_DEV: Failed to send register address 0x00000000.
[2022/10/20 15:45:19] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.
[2022/10/20 15:45:19] E> eeprom: Failed to read I2C slave device
[2022/10/20 15:45:19] E> NV3P_SERVER: Failed to get eeprom handle for cvm from eeprom manager.
[2022/10/20 15:45:19] E> NV3P_SERVER: Could not read eeprom for module cvm.
[2022/10/20 15:46:22] ÿ
[2022/10/20 15:46:22] [0004.079] I> MB1 (version: 0.23.0.0-t234-54845784-92215740)
[2022/10/20 15:46:22] [0004.084] I> t234-A01-0-Silicon (0x12347) Prod
[2022/10/20 15:46:22] [0004.089] I> Boot-mode : BPMP Diagnostic
[2022/10/20 15:46:22] [0004.092] I> Emulation: 
[2022/10/20 15:46:22] [0004.095] I> Entry timestamp: 0x00000000
[2022/10/20 15:46:22] [0004.099] I> last_boot_error: 0x0
[2022/10/20 15:46:22] [0004.102] I> BR-BCT: preprod_dev_sign: 0
[2022/10/20 15:46:22] [0004.105] I> rst_source: 0x0, rst_level: 0x0
[2022/10/20 15:46:22] [0004.110] I> Task: Crypto init (0x5001c0d9)
[2022/10/20 15:46:22] [0004.114] I> Task: Secure debug controls (0x5000cb19)
[2022/10/20 15:46:22] [0004.119] I> Task: strap war set (0x5000b739)
[2022/10/20 15:46:22] [0004.123] I> strap value(0x4000001) set to 0x4000001
[2022/10/20 15:46:22] [0004.128] I> Task: Program NV master stream id (0x5000cad1)
[2022/10/20 15:46:22] [0004.133] I> Task: Verify boot mode (0xd482021)
[2022/10/20 15:46:22] [0004.139] I> Task: Alias fuses (0x50010749)
[2022/10/20 15:46:22] [0004.144] E> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[2022/10/20 15:46:22] [0004.151] I> Task: Print SKU type (0x5000fba9)
[2022/10/20 15:46:22] [0004.155] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[2022/10/20 15:46:22] [0004.160] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[2022/10/20 15:46:22] [0004.164] I> FUSE_OPT_TPC_DISABLE = 0x00000020
[2022/10/20 15:46:22] [0004.169] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[2022/10/20 15:46:22] [0004.173] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[2022/10/20 15:46:22] [0004.177] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[2022/10/20 15:46:22] [0004.181] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[2022/10/20 15:46:22] [0004.185] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[2022/10/20 15:46:22] [0004.190] I> FUSE_SKU_INFO_0 = 0xd2
[2022/10/20 15:46:22] [0004.193] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[2022/10/20 15:46:22] [0004.197] I> FUSE_PACKAGE_INFO_0 = 0x2
[2022/10/20 15:46:22] [0004.201] I> SKU: Prod
[2022/10/20 15:46:22] [0004.203] I> Task: Boost clocks (0x50013db1)
[2022/10/20 15:46:22] [0004.207] I> Initializing PLLC2 for AXI_CBB.
[2022/10/20 15:46:22] [0004.211] I> AXI_CBB : src = 35, divisor = 0
[2022/10/20 15:46:22] [0004.215] I> Task: Voltage monitor (0x50013dbd)
[2022/10/20 15:46:22] [0004.220] I> VMON: Vmon re-calibration and fine tuning done
[2022/10/20 15:46:22] [0004.225] I> Task: UPHY init (0x5000da39)
[2022/10/20 15:46:22] [0004.229] E> UPHY: UPHY lane info table is empty in MB1 BCT.
[2022/10/20 15:46:22] [0004.235] I> Task: Boot device init (0x50000a3d)
[2022/10/20 15:46:22] [0004.239] I> Boot_device: RCM
[2022/10/20 15:46:22] [0004.242] I> USB configuration success
[2022/10/20 15:46:22] [0004.246] I> Task: TSC init (0x5001ed35)
[2022/10/20 15:46:22] [0004.250] I> Task: Enable WDT 5th expiry (0x5001f929)
[2022/10/20 15:46:22] [0004.255] I> Task: Disable WDT globally (0x5001f965)
[2022/10/20 15:46:22] [0004.260] I> Task: I2C register (0x50000a31)
[2022/10/20 15:46:22] [0004.264] I> Task: Reset FSI (0x50013db9)
[2022/10/20 15:46:22] [0004.268] I> Task: Enable clock-mon (0x5001ed25)
[2022/10/20 15:46:22] [0004.283] I> FMON: Fmon re-programming done
[2022/10/20 15:46:22] [0004.287] I> Task: MB1 fixed firewalls (0x5001e55d)
[2022/10/20 15:46:22] [0004.295] I> Task: Load MB2/Applet/FSKP (0x5000d451)
[2022/10/20 15:46:22] [0004.300] I> Loading MB2 Applet
[2022/10/20 15:46:22] [0004.303] I> Scratch RSV109: 0x00000000    active chain: 0
[2022/10/20 15:46:22] [0004.308] I> Slot: 0
[2022/10/20 15:46:22] [0004.310] I> Binary[21] block-0 (partition size: 0x50000)
[2022/10/20 15:46:22] [0004.315] I>  get_binary_info: Binary name: MB2-Applet
[2022/10/20 15:46:22] [0004.320] I> Size of crypto header is 8192
[2022/10/20 15:46:22] [0004.324] I> BCH load address is : 0x4004e000
[2022/10/20 15:46:22] [0004.329] I> Size of crypto header is 8192
[2022/10/20 15:46:22] [0004.333] I> BCH of MB2-Applet read from storage
[2022/10/20 15:46:22] [0004.337] I> BCH address is : 0x4004e000
[2022/10/20 15:46:22] [0004.341] I> MB2-Applet header integrity check is success
[2022/10/20 15:46:22] [0004.346] I> Binary magic in BCH component 0 is MB2A
[2022/10/20 15:46:22] [0004.351] I> component binary type is 21
[2022/10/20 15:46:22] [0004.355] I> Size of crypto header is 8192
[2022/10/20 15:46:22] [0004.367] I> MB2-Applet binary is read from storage
[2022/10/20 15:46:22] [0004.372] I> MB2-Applet binary integrity check is success
[2022/10/20 15:46:22] [0004.378] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b80)
[2022/10/20 15:46:22] [0004.384] I> Task: Map CCPLEX SHARED carveout (0x5000d521)
[2022/10/20 15:46:22] [0004.390] I> Task: Prepare MB2 params (0x5000d5dd)
[2022/10/20 15:46:22] [0004.395] I> MB2-params @ 0x40060000
[2022/10/20 15:46:22] [0004.398] I> Region(2) already mapped
[2022/10/20 15:46:22] [0004.402] E> Failed to map carveout: 50
[2022/10/20 15:46:22] [0004.406] I> BR-BCT Boot Chain Fields
[2022/10/20 15:46:22] [0004.409] I> 	 u32_non_gpio_select_boot_chain  : 0
[2022/10/20 15:46:22] [0004.414] I> 	 u32_num_boot_chains             : 0
[2022/10/20 15:46:22] [0004.419] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[2022/10/20 15:46:22] [0004.424] I> Task: Misc NV security settings (0x5000ced5)
[2022/10/20 15:46:22] [0004.429] I> NVDEC sticky bits programming done
[2022/10/20 15:46:22] [0004.434] I> Task: Disable/Reload WDT (0x5001f991)
[2022/10/20 15:46:22] [0004.438] I> Programmed SLCG global override := 0x0
[2022/10/20 15:46:22] [0004.443] I> MB1: MSS reconfig completed
[2022/10/20 15:46:22] I> Applet (version: 0.0.0.0-t234-54845784-dee653cf)
[2022/10/20 15:46:22] I> t234-A01-0-Silicon (0x12347)
[2022/10/20 15:46:22] I> Emulation: 
[2022/10/20 15:46:22] I> Entry timestamp: 0xffffffff
[2022/10/20 15:46:22] I> Task: Pinmux init (0x4000062d)
[2022/10/20 15:46:22] I> Task: Boot device init (0x400012e5)
[2022/10/20 15:46:22] I> Applet do storage init
[2022/10/20 15:46:22] I> Boot_device: QSPI_FLASH instance: 0
[2022/10/20 15:46:22] I> Qspi clock source : clk_m
[2022/10/20 15:46:22] I> QSPI-0l initialized successfully
[2022/10/20 15:46:22] I> sdmmc DDR50 mode
[2022/10/20 15:46:22] I> sdmmc bdev is already initialized
[2022/10/20 15:46:22] E> Unknown device 7
[2022/10/20 15:46:22] E> Unknown device 8
[2022/10/20 15:46:22] I> Task: Partition Manager Init (0x40002d1d)
[2022/10/20 15:46:22] I> Found 57 partitions in QSPI_FLASH (instance 0)
[2022/10/20 15:46:22] W> Cannot find any partition table for 00000003
[2022/10/20 15:46:22]  > PARTITION_MANAGER: Failed to publish partition.
[2022/10/20 15:46:22] I> Found 11 partitions in SDMMC_USER (instance 3)
[2022/10/20 15:46:22] I> Task: I2C register (0x400006a5)
[2022/10/20 15:46:22] I> Task: Register exit handlers (0x400005f5)
[2022/10/20 15:46:22] I> Task: Enter 3p server (0x400018e1)
[2022/10/20 15:46:22] I> USB configuration success
[2022/10/20 15:46:22] I> Populate chip info
[2022/10/20 15:46:22] I> RAM_CODE 0x4000001
[2022/10/20 15:46:22] I> Populate eeprom info
[2022/10/20 15:46:22] I> Populate eeprom info for module cvm
[2022/10/20 15:46:22] E> I2C: Timeout while polling for transfer complete. Last value 0x00000002.
[2022/10/20 15:46:22] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[2022/10/20 15:46:22] E> I2C_DEV: Failed to send register address 0x00000000.
[2022/10/20 15:46:22] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.
[2022/10/20 15:46:22] E> eeprom: Failed to read I2C slave device
[2022/10/20 15:46:22] E> NV3P_SERVER: Failed to get eeprom handle for cvm from eeprom manager.
[2022/10/20 15:46:22] E> NV3P_SERVER: Could not read eeprom for module cvm.