[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2713) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:47:42 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefaf000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29504(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570404K/4159488K available (15230K kernel code, 2926K rwdata, 6620K rodata, 8576K init, 609K bss, 113948K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a11b808 ( 2927 KB) [ 0.000000] .bss : 0xffffff800a11b808 - 0xffffff800a1b3dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001719] Console: colour dummy device 80x25 [ 0.002558] console [tty0] enabled [ 0.002584] kmemleak: Kernel memory leak detector disabled [ 0.002615] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002646] pid_max: default: 32768 minimum: 301 [ 0.003102] Security Framework initialized [ 0.003335] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003355] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004554] ftrace: allocating 47001 entries in 184 pages [ 0.176391] sched-energy: CPU device node has no sched-energy-costs [ 0.176426] ASID allocator initialised with 65536 entries [ 0.215986] tegra-id: chipid=22117. [ 0.216033] tegra-id: opt_subrevision=0. [ 0.216062] Tegra Speedo/IDDQ fuse revision 4 [ 0.216077] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.216094] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.216109] Tegra: CPU Speedo Value 2032, SoC Speedo Value 1927, GPU Speedo Value 2031 [ 0.216131] Tegra: CPU IDDQ Value 1708, SoC IDDQ Value 1884, GPU IDDQ Value 2270 [ 0.216166] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.216191] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.216266] DTB Build time: Dec 9 2019 22:51:55 [ 0.265056] CPU1: Booted secondary processor [411fd071] [ 0.296978] CPU2: Booted secondary processor [411fd071] [ 0.328947] CPU3: Booted secondary processor [411fd071] [ 0.329037] Brought up 4 CPUs [ 0.329099] SMP: Total of 4 processors activated. [ 0.329117] CPU features: detected feature: 32-bit EL0 Support [ 0.329397] CPU: All CPU(s) started at EL2 [ 0.329430] alternatives: patching kernel code [ 0.337484] devtmpfs: initialized [ 0.375275] Initilizing CustomIPI irq domain [ 0.375712] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.375762] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.386237] pinctrl core: initialized pinctrl subsystem [ 0.386915] OS set in device tree is not L4T. [ 0.387345] regulator-dummy: no parameters [ 0.387634] Initializing plugin-manager [ 0.387748] Plugin module not found [ 0.387990] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.388571] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.389683] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.390196] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.390848] node /plugin-manager/fragement@10 match with board >=3448-0000-300 [ 0.392957] node /plugin-manager/fragement@11 match with board >=3448-0000-300 [ 0.396425] NET: Registered protocol family 16 [ 0.401922] pstore: using zlib compression [ 0.402590] console [pstore-1] enabled [ 0.402608] pstore: Registered ramoops as persistent store backend [ 0.402626] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.417074] cpuidle: using governor menu [ 0.420417] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.422296] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.422345] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.425496] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.428212] tegra_powergate_init: DONE [ 0.428254] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.428292] DTB Build time: Dec 9 2019 22:51:55 [ 0.430240] Tegra reboot handler registered. [ 0.434770] iommu: Adding device tegra-carveouts to group 0 [ 0.434939] platform tegra-carveouts: domain=ffffffc0f9bdc318 allocates as[0]=ffffffc0f9bd40a8 [ 0.435312] iommu: Adding device smmu_test to group 1 [ 0.435378] platform smmu_test: domain=ffffffc0f9bdc558 allocates as[0]=ffffffc0f9bd4110 [ 0.436210] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.436289] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.436355] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.436379] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.436415] mc-err: mcerr ops are set to t21x [ 0.443896] iommu: Adding device 70090000.xusb to group 2 [ 0.444208] iommu: Adding device 70006000.serial to group 3 [ 0.444309] platform 70006000.serial: domain=ffffffc0f9b69618 allocates as[0]=ffffffc0f9bd4178 [ 0.444751] iommu: Adding device 70006040.serial to group 4 [ 0.445075] iommu: Adding device 70006200.serial to group 5 [ 0.445338] iommu: Adding device sound to group 6 [ 0.445402] platform sound: domain=ffffffc0f9b69b58 allocates as[0]=ffffffc0f9bd41e0 [ 0.445991] iommu: Adding device 7000d400.spi to group 7 [ 0.446275] iommu: Adding device 7000d600.spi to group 8 [ 0.446555] iommu: Adding device 70410000.spi to group 9 [ 0.446881] iommu: Adding device 50000000.host1x to group 10 [ 0.447173] iommu: Adding device 54080000.vi to group 11 [ 0.447579] iommu: Adding device 54600000.isp to group 12 [ 0.447857] iommu: Adding device 54680000.isp to group 13 [ 0.448186] iommu: Adding device tegradc.0 to group 14 [ 0.448260] platform tegradc.0: domain=ffffffc0f94dda98 allocates as[0]=ffffffc0f9bd4248 [ 0.448791] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.449208] iommu: Adding device tegradc.1 to group 15 [ 0.449274] platform tegradc.1: domain=ffffffc0f94ddcd8 allocates as[0]=ffffffc0f9bd42b0 [ 0.449797] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.450064] iommu: Adding device 54340000.vic to group 16 [ 0.450294] iommu: Adding device 544c0000.nvenc to group 17 [ 0.450505] iommu: Adding device 54500000.tsec to group 18 [ 0.450727] iommu: Adding device 54100000.tsecb to group 19 [ 0.450936] iommu: Adding device 54480000.nvdec to group 20 [ 0.451169] iommu: Adding device 54380000.nvjpg to group 21 [ 0.452220] iommu: Adding device 546c0000.i2c to group 22 [ 0.452573] iommu: Adding device 57000000.gpu to group 23 [ 0.452643] platform 57000000.gpu: domain=ffffffc0f94e9cd8 allocates as[0]=ffffffc0f9bd4318 [ 0.452701] platform 57000000.gpu: domain=ffffffc0f94e9cd8 allocates as[1]=ffffffc0f9bd4380 [ 0.452763] platform 57000000.gpu: domain=ffffffc0f94e9cd8 allocates as[2]=ffffffc0f9bd43e8 [ 0.452815] platform 57000000.gpu: domain=ffffffc0f94e9cd8 allocates as[3]=ffffffc0f9bd4450 [ 0.453778] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.453820] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.453848] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.453868] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.453885] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.505157] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.505194] tegra-pmc: Clear bootloader IO dpd settings [ 0.505227] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.505303] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.505617] iommu: Adding device 70012000.se to group 24 [ 0.506403] iommu: Adding device 7000c000.i2c to group 25 [ 0.506670] iommu: Adding device 7000c400.i2c to group 26 [ 0.506941] iommu: Adding device 7000c500.i2c to group 27 [ 0.507217] iommu: Adding device 7000c700.i2c to group 28 [ 0.507524] iommu: Adding device 7000d000.i2c to group 29 [ 0.507795] iommu: Adding device 7000d100.i2c to group 30 [ 0.508094] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.508165] platform sdhci-tegra.0: domain=ffffffc0f94f5e58 allocates as[0]=ffffffc0f9bd44b8 [ 0.509040] iommu: Adding device 700d0000.xudc to group 32 [ 0.512405] vdd-ac-bat: 5000 mV [ 0.512783] vdd-5v0-sys: 5000 mV [ 0.513765] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.513852] vdd-5v0-hdmi: 5000 mV [ 0.514262] vdd-1v8-sys: 1800 mV [ 0.514658] vdd-fan: supplied by vdd-5v0-sys [ 0.514708] vdd-fan: 5000 mV [ 0.515102] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.515173] vdd-usb-vbus: 5000 mV [ 0.515695] vdd-usb-vbus2: 5000 mV [ 0.541830] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544166] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.546068] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.546112] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.546165] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.546528] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.554849] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.555216] SCSI subsystem initialized [ 0.555488] libata version 3.00 loaded. [ 0.555795] usbcore: registered new interface driver usbfs [ 0.555868] usbcore: registered new interface driver hub [ 0.555960] usbcore: registered new device driver usb [ 0.559996] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.564367] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.565218] random: fast init done [ 0.565370] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.568368] vdd-ddr-1v1: 1150 mV [ 0.572237] vdd-pre-reg-1v35: 1350 mV [ 0.576239] vdd-1v8: 1800 mV [ 0.580236] avdd-sys-1v2: 1200 mV [ 0.584235] vdd-pex-1v0: 1050 mV [ 0.584940] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.585509] max77620-ldo3: at 3100 mV [ 0.588243] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.588787] max77620-ldo5: at 3100 mV [ 0.592237] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.596235] avdd-1v05-pll: 1050 mV [ 0.600235] avdd-io-hdmi-dp: 1050 mV [ 0.602689] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.603032] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.603349] max77620 4-003c: max77620 probe successful [ 0.606056] media: Linux media interface: v0.10 [ 0.606132] Linux video capture interface: v2.00 [ 0.607082] pps_core: LinuxPPS API ver. 1 registered [ 0.607108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.607152] PTP clock support registered [ 0.610763] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.617117] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.617926] Advanced Linux Sound Architecture Driver Initialized. [ 0.618586] Bluetooth: Core ver 2.22 [ 0.618660] NET: Registered protocol family 31 [ 0.618678] Bluetooth: HCI device and connection manager initialized [ 0.618707] Bluetooth: HCI socket layer initialized [ 0.618730] Bluetooth: L2CAP socket layer initialized [ 0.618773] Bluetooth: SCO socket layer initialized [ 0.620483] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.620522] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.620581] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.620609] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.623740] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.625059] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.625165] vdd-3v3-sys: 3300 mV [ 0.625456] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.628300] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.628773] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.628827] vdd-3v3-sd: 3300 mV [ 0.629721] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.629780] avdd-io-edp-1v05: 1050 mV [ 0.630209] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.630263] vdd-usb-hub-en: 5000 mV [ 0.631699] camchar: rtcpu character device driver loaded [ 0.632438] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.633771] clocksource: Switched to clocksource arch_sys_counter [ 0.673510] VFS: Disk quotas dquot_6.6.0 [ 0.673679] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.674234] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.674672] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.674720] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.674939] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.674962] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.674988] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.675038] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.675065] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.675098] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.675120] nvmap_page_pool_init: Total RAM pages: 1011385 [ 0.675139] nvmap_page_pool_init: nvmap page pool size: 126423 pages (493 MB) [ 0.675261] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.675709] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.676681] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.684869] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.685332] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.685601] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.685871] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.686077] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.686359] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.686380] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.686827] NET: Registered protocol family 2 [ 0.687820] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.688058] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.688562] TCP: Hash tables configured (established 32768 bind 32768) [ 0.688728] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.688827] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.689251] NET: Registered protocol family 1 [ 0.690121] RPC: Registered named UNIX socket transport module. [ 0.690153] RPC: Registered udp transport module. [ 0.690171] RPC: Registered tcp transport module. [ 0.690189] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.690217] PCI: CLS 0 bytes, default 64 [ 0.690449] Trying to unpack rootfs image as initramfs... [ 0.922509] Freeing initrd memory: 5356K [ 0.932204] host1x 50000000.host1x: initialized [ 0.934115] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.937352] audit: initializing netlink subsys (disabled) [ 0.937475] audit: type=2000 audit(0.787:1): initialized [ 0.938319] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.948375] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.949950] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.950757] 9p: Installing v9fs 9p2000 file system support [ 0.954280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.954467] io scheduler noop registered [ 0.954787] io scheduler cfq registered (default) [ 0.957481] gic 702f9000.agic: GIC IRQ controller registered [ 0.960531] iommu: Adding device 702ef000.adsp to group 33 [ 0.969369] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.969572] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.970206] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x79a640f [ 0.970238] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.971850] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.971986] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.972097] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.972307] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.972424] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.972531] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.972636] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.972750] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.972856] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.972979] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.979081] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.980817] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.982779] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.984085] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.984445] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.985680] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.985914] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.986150] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.986430] Adding domain tsec-pd to PM domain host1x-pd [ 0.989530] tsec 54500000.tsec: initialized [ 0.990943] tsec 54100000.tsecb: initialized [ 0.991656] Adding domain nvdec-pd to PM domain host1x-pd [ 0.995087] nvdec 54480000.nvdec: initialized [ 0.996175] Adding domain vic03-pd to PM domain host1x-pd [ 0.996376] Adding domain msenc-pd to PM domain host1x-pd [ 0.996563] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.000567] falcon 54340000.vic: initialized [ 1.001841] falcon 544c0000.nvenc: initialized [ 1.003195] falcon 54380000.nvjpg: initialized [ 1.007549] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.007630] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.007679] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.007779] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.007918] display board info: id 0x0, fab 0x0 [ 1.007958] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.007980] tegra_cec 70015000.tegra_cec: probed [ 1.007987] generic_infoframe_type: 0x87 [ 1.008119] tegradc tegradc.0: DT parsed successfully [ 1.008186] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 1.012191] tegradc tegradc.0: probed [ 1.012896] Console: switching to colour frame buffer device 80x30 [ 1.012951] tegradc tegradc.0: fb registered [ 1.014289] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.014391] tegradc tegradc.1: No lt-data, using default setting [ 1.014429] tegradc tegradc.1: No hpd-gpio in DT [ 1.014474] tegradc tegradc.1: DT parsed successfully [ 1.014540] tegradc tegradc.1: Display dc.ffffff800acc0000 registered with id=1 [ 1.016066] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.016975] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.523096] Host read timeout at address 545c00c4 [ 1.523331] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.524101] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.524342] tegradc tegradc.1: probed [ 1.524471] kfuse 7000fc00.kfuse: initialized [ 1.524773] tegradc tegradc.1: fb registered [ 1.525500] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.526360] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.527363] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.527396] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.527782] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.528178] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.528200] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.528221] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.528248] tegradc tegradc.1: blank - powerdown [ 1.528278] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.528295] Extcon DP: HPD disabled [ 1.528308] hpd: hpd_switch 0 [ 1.528321] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.528342] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.528359] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.529004] vdd-gpu: applied init 1000000uV constraint [ 1.529025] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.529404] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.533304] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.533430] No Device Node present for smmu client: serial8250 !! [ 1.533452] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.533511] iommu: Adding device serial8250 to group 35 [ 1.535968] console [ttyS0] disabled [ 1.536087] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.996684] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.037792] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.037797] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.400990] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.805280] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.807297] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.913465] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.913477] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.913482] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.913487] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.913492] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.913536] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.913641] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.913918] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.914069] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.914099] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.914132] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.914154] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.914311] pci 0000:01:00.0: supports D1 D2 [ 2.914314] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.929870] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.929916] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.929921] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.929931] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.929951] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.929969] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.929979] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.929985] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.929991] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.930360] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.930365] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.930372] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.930488] aer 0000:00:02.0:pcie002: service driver aer loaded [ 4.068979] console [ttyS0] enabled [ 4.073740] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 4.082971] serial-tegra 70006200.serial: RX in PIO mode [ 4.088405] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 4.098303] [drm] Initialized [ 4.111346] brd: module loaded [ 4.119799] loop: module loaded [ 4.123102] tegra_profiler: version: 1.139, samples/io: 47/27 [ 4.129006] tegra_profiler: auth: init [ 4.134159] THERMAL EST: found 2 subdevs [ 4.138127] THERMAL EST num_resources: 0 [ 4.142060] [THERMAL EST subdev 0] [ 4.145463] [THERMAL EST subdev 1] [ 4.149354] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 4.158331] THERMAL EST: thz register success. [ 4.162932] THERMAL EST: end of probe, return err: 0 [ 4.169137] hisi_sas: driver version v1.6 [ 4.177588] tegra-qspi 70410000.spi: Prod settings list not found [ 4.184889] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 4.190324] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 4.205235] libphy: Fixed MDIO Bus: probed [ 4.210323] tun: Universal TUN/TAP device driver, 1.6 [ 4.215399] tun: (C) 1999-2004 Max Krasnyansky [ 4.222604] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.228462] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.234456] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.241423] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.247059] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.254893] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.260867] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 4.267862] Copyright(c) 1999 - 2017 Intel Corporation. [ 4.273935] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 4.279814] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 4.300665] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 4.313088] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ec:08:87 from device tree [ 4.325580] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.337030] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.368399] PPP generic driver version 2.4.2 [ 4.372871] PPP BSD Compression module registered [ 4.377596] PPP Deflate Compression module registered [ 4.382690] PPP MPPE Compression module registered [ 4.387497] NET: Registered protocol family 24 [ 4.392016] usbcore: registered new interface driver r8152 [ 4.397565] usbcore: registered new interface driver asix [ 4.403025] usbcore: registered new interface driver ax88179_178a [ 4.409165] usbcore: registered new interface driver cdc_ether [ 4.415039] usbcore: registered new interface driver net1080 [ 4.420747] usbcore: registered new interface driver cdc_subset [ 4.426729] usbcore: registered new interface driver zaurus [ 4.432364] usbcore: registered new interface driver cdc_ncm [ 4.438187] VFIO - User Level meta-driver version: 0.3 [ 4.444634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.451224] ehci-pci: EHCI PCI platform driver [ 4.455736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.461936] ohci-pci: OHCI PCI platform driver [ 4.466431] ohci-platform: OHCI generic platform driver [ 4.474316] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 4.480676] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 4.488993] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f917a400 id [ 4.497470] usbcore: registered new interface driver uas [ 4.502866] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 4.502914] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.502939] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 4.503702] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 4.503762] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 4.504080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.504086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.504090] usb usb1: Product: xHCI Host Controller [ 4.504094] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 4.504098] usb usb1: SerialNumber: 70090000.xusb [ 4.514196] hub 1-0:1.0: USB hub found [ 4.514240] hub 1-0:1.0: 5 ports detected [ 4.514794] tegra-xusb 70090000.xusb: xHCI Host Controller [ 4.514805] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 4.514908] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.515012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.515017] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.515021] usb usb2: Product: xHCI Host Controller [ 4.515025] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 4.515029] usb usb2: SerialNumber: 70090000.xusb [ 4.515444] hub 2-0:1.0: USB hub found [ 4.515477] hub 2-0:1.0: 4 ports detected [ 4.617830] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 4.644467] usbcore: registered new interface driver usb-storage [ 4.650603] usbcore: registered new interface driver usbserial [ 4.660006] tegra-xudc-new 700d0000.xudc: device count: 1 [ 4.666706] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 4.673445] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 4.678709] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.682407] mousedev: PS/2 mouse device common for all mice [ 4.682517] usbcore: registered new interface driver xpad [ 4.695240] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.798891] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.808712] rtc rtc1: alarm rtc device [ 4.812515] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 4.819712] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 4.826470] i2c /dev entries driver [ 4.831755] i2c i2c-6: Added multiplexed i2c bus 7 [ 4.836979] i2c i2c-6: Added multiplexed i2c bus 8 [ 4.841794] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 4.845782] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.856291] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.878939] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 4.885675] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 4.885783] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.885820] imx219 7-0010: board setup failed [ 4.885917] imx219: probe of 7-0010 failed with error -121 [ 4.886418] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.915504] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 4.915588] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.915615] imx219 8-0010: board setup failed [ 4.915680] imx219: probe of 8-0010 failed with error -121 [ 4.922074] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.946277] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.953435] usb 1-2: Product: 4-Port USB 2.1 Hub [ 4.958073] usb 1-2: Manufacturer: Generic [ 4.963015] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 4.963505] hub 1-2:1.0: USB hub found [ 4.964104] hub 1-2:1.0: 4 ports detected [ 4.977907] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 4.985363] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.994701] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 5.003676] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 5.012690] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.022008] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 5.030973] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 5.040003] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.049323] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 5.058294] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 5.066306] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 5.074309] tegra_aotag tegra-aotag: Registering sensor 0 [ 5.079826] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 5.085076] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 5.089790] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 5.098394] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.107731] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 5.115961] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 5.117776] usb 1-2: usb_suspend_both: status 0 [ 5.117853] usb usb1: usb_suspend_both: status 0 [ 5.133939] parse_throttle_dt_data: Num cap clks = 6 [ 5.138919] parse_throttle_dt_data: clk=cclk_g type=2 [ 5.143987] parse_throttle_dt_data: clk=gpu type=4 [ 5.148809] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 5.154933] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 5.161052] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 5.167070] parse_throttle_dt_data: clk=emc type=3 [ 5.172249] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.181687] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.191137] tegra_throttle_probe: probe successful. #cdevs=4 [ 5.197565] FAN dev name: pwm-fan [ 5.200980] FAN:gpio request success. [ 5.204726] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 5.210708] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 5.217506] pwm_fan_driver pwm-fan: fan tach request irq success [ 5.223532] pwm_fan_driver pwm-fan: tach period: 1000 [ 5.228692] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 5.236269] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 5.244021] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 5.251855] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 5.259692] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 5.267536] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 5.275377] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 5.283209] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 5.291046] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 5.298968] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 5.307523] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 5.316213] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 5.325042] device-mapper: uevent: version 1.0.3 [ 5.330165] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 5.343881] tegra210-cpufreq cpufreq: probe()...completed [ 5.350096] sdhci: Secure Digital Host Controller Interface driver [ 5.356276] sdhci: Copyright(c) Pierre Ossman [ 5.360630] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.366775] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 5.371919] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 5.379172] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 5.389910] tegra-se 70012000.se: tegra_se_probe: complete [ 5.395924] hidraw: raw HID events driver (C) Jiri Kosina [ 5.402591] usbcore: registered new interface driver usbhid [ 5.408171] usbhid: USB HID core driver [ 5.414127] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 5.420700] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 5.430865] nvpmodel: initialized successfully [ 5.436421] usbcore: registered new interface driver snd-usb-audio [ 5.437901] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 5.451994] No Device Node present for smmu client: snd-soc-dummy !! [ 5.459506] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 5.469192] iommu: Adding device snd-soc-dummy to group 36 [ 5.476150] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 5.499297] OPE platform probe [ 5.502484] OPE platform probe successful [ 5.506919] OPE platform probe [ 5.510073] OPE platform probe successful [ 5.514905] u32 classifier [ 5.517607] Actions configured [ 5.521099] Initializing XFRM netlink socket [ 5.526097] NET: Registered protocol family 10 [ 5.535312] NET: Registered protocol family 17 [ 5.539774] NET: Registered protocol family 15 [ 5.544324] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.557456] Bluetooth: RFCOMM socket layer initialized [ 5.562622] Bluetooth: RFCOMM ver 1.11 [ 5.566379] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.572298] Bluetooth: HIDP socket layer initialized [ 5.577277] 9pnet: Installing 9P2000 support [ 5.581596] Key type dns_resolver registered [ 5.587119] Registered cp15_barrier emulation handler [ 5.592395] Registered setend emulation handler [ 5.598451] registered taskstats version 1 [ 5.603148] Adding domain ve2-pd to PM domain host1x-pd [ 5.608616] Adding domain ve-pd to PM domain host1x-pd [ 5.615764] isp 54600000.isp: initialized [ 5.620722] isp 54680000.isp: initialized [ 5.634717] last reset is due to software reset [ 5.639262] KERNEL: PMC reset status reg: 0x3 [ 5.643723] BL: PMC reset status reg: 0x3 [ 5.647742] BL: PMIC poweroff Event Recorder: 0x0 [ 5.653862] clk_cbus_recalc_rate: no gbus parent [ 5.658491] clk_cbus_round_rate: no gbus parent [ 5.663036] clk_cbus_round_rate: no gbus parent [ 5.667570] clk_cbus_recalc_rate: no gbus parent [ 5.672299] clk_cbus_recalc_rate: no gbus parent [ 5.676931] clk_cbus_round_rate: no gbus parent [ 5.681470] clk_cbus_round_rate: no gbus parent [ 5.686002] clk_cbus_recalc_rate: no gbus parent [ 5.690648] tegra_dvfs: GPU-cap: registered [ 5.694884] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 5.703594] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 5.712371] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 5.732294] tegra_dvfs: vdd-gpu-vts: registered [ 5.741773] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 5.751621] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 5.761026] input: gpio-keys as /devices/gpio-keys/input/input1 [ 5.780828] mmc0: hw tuning done ... [ 5.784442] mmc0: new ultra high speed SDR50 SDHC card at address aaaa [ 5.791327] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 5.802252] tegra_rtc 7000e000.rtc: setting system clock to 2020-07-25 14:22:39 UTC (1595686959) [ 5.811109] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 5.812087] vi 54080000.vi: vi_probe: ++ [ 5.824157] vi 54080000.vi: initialized [ 5.830102] vi 54080000.vi: subdev nvcsi--2 bound [ 5.834923] vi 54080000.vi: subdev nvcsi--1 bound [ 5.839859] mmcblk mmc0:aaaa: Card claimed for testing. [ 5.845681] Disable partitions left on by BL [ 5.849975] disb [ 5.852021] bwmgr: missing cdev-type property [ 5.856475] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.865780] DRAM derating cdev registered. [ 5.870978] vdd-fan: disabling [ 5.874045] vdd-usb-vbus: disabling [ 5.877525] vdd-usb-vbus2: disabling [ 5.881113] vddio-sdmmc3-ap: disabling [ 5.884989] avdd-io-edp-1v05: disabling [ 5.888836] vdd-usb-hub-en: disabling [ 5.892628] ALSA device list: [ 5.895606] #0: tegra-hda at 0x70038000 irq 83 [ 5.903323] Freeing unused kernel memory: 8576K [ 5.928327] Root device found: mmcblk0p1 [ 5.933326] Found dev node: /dev/mmcblk0p1 [ 5.994406] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.003329] Rootfs mounted over mmcblk0p1 [ 6.037679] Switching from initrd to actual rootfs [ 6.446693] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.465323] cgroup: cgroup2: unknown option "nsdelegate" [ 6.491278] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.513388] systemd[1]: Detected architecture arm64. [ 6.542519] systemd[1]: Set hostname to . [ 6.677599] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.694660] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.896712] random: systemd: uninitialized urandom read (16 bytes read) [ 6.903392] systemd[1]: Reached target User and Group Name Lookups. [ 6.910049] random: systemd: uninitialized urandom read (16 bytes read) [ 6.918663] systemd[1]: Created slice System Slice. [ 6.923733] random: systemd: uninitialized urandom read (16 bytes read) [ 6.930528] systemd[1]: Listening on Syslog Socket. [ 6.935666] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.941898] systemd[1]: Listening on Journal Socket. [ 7.062496] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.197582] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 7.236462] snd_soc_seeed_voicecard: loading out-of-tree module taints kernel. [ 7.252992] ac10x i2c_id number: 0 [ 7.256414] systemd-journald[1956]: Received request to flush runtime journal from PID 1 [ 7.264955] ac10x data protocol: 0 [ 7.269118] tegra-i2c 7000c400.i2c: no acknowledge from address 0x3b [ 7.406463] ac10x codec count : 1 [ 8.239490] random: crng init done [ 8.242896] random: 7 urandom warning(s) missed due to ratelimiting [ 8.678833] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 8.678839] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 9.006262] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 9.034941] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 9.034948] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.034952] usb 2-1: Product: 4-Port USB 3.1 Hub [ 9.034956] usb 2-1: Manufacturer: Generic [ 9.038395] hub 2-1:1.0: USB hub found [ 9.039177] hub 2-1:1.0: 4 ports detected [ 9.326173] usb 2-1.1: new SuperSpeed USB device number 3 using tegra-xusb [ 9.347126] usb 2-1.1: New USB device found, idVendor=0781, idProduct=5595 [ 9.347131] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.347134] usb 2-1.1: Product: Ultra USB 3.0 [ 9.347137] usb 2-1.1: Manufacturer: SanDisk [ 9.347140] usb 2-1.1: SerialNumber: 4C530000300215105104 [ 9.348019] usb-storage 2-1.1:1.0: USB Mass Storage device detected [ 9.348383] scsi host0: usb-storage 2-1.1:1.0 [ 10.358875] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 10.367932] sd 0:0:0:0: [sda] 120127488 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 10.377961] sd 0:0:0:0: [sda] Write Protect is off [ 10.382777] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 10.383362] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.396164] sda: sda1 sda2 sda3 [ 10.398151] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 10.662573] Adding 18138108k swap on /dev/sda2. Priority:5 extents:1 across:18138108k [ 11.295179] using random self ethernet address [ 11.299784] using random host ethernet address [ 12.073589] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 12.560852] tegra-i2c 7000c400.i2c: no acknowledge from address 0x35 [ 12.895843] Mass Storage Function, version: 2009/09/11 [ 12.895849] LUN: removable file: (no medium) [ 12.911980] using random self ethernet address [ 12.917047] using random host ethernet address [ 12.995233] rndis0: HOST MAC b2:f1:be:8f:73:64 [ 12.995515] rndis0: MAC b2:f1:be:8f:73:65 [ 13.001482] usb0: HOST MAC b2:f1:be:8f:73:66 [ 13.001517] usb0: MAC b2:f1:be:8f:73:67 [ 13.001543] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 13.004510] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 13.004543] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 13.004601] tegra-xudc-new 700d0000.xudc: entering ELPG [ 13.004862] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 13.004878] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 13.011569] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 13.011594] tegra-xudc-new 700d0000.xudc: entering ELPG [ 13.011838] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 13.018166] l4tbr0: port 1(rndis0) entered blocking state [ 13.018171] l4tbr0: port 1(rndis0) entered disabled state [ 13.031316] device rndis0 entered promiscuous mode [ 13.061900] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 13.069011] l4tbr0: port 2(usb0) entered blocking state [ 13.069017] l4tbr0: port 2(usb0) entered disabled state [ 13.069175] device usb0 entered promiscuous mode [ 13.089313] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 14.129063] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.130257] eth0: 0xffffff800a37e000, 00:04:4b:ec:08:87, IRQ 406 [ 14.199270] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.458726] zram: Added device: zram0 [ 14.459150] zram: Added device: zram1 [ 14.459569] zram: Added device: zram2 [ 14.462256] zram: Added device: zram3 [ 14.480344] zram0: detected capacity change from 0 to 519614464 [ 14.558499] Adding 507432k swap on /dev/zram0. Priority:5 extents:1 across:507432k SS [ 14.569646] zram1: detected capacity change from 0 to 519614464 [ 14.583245] Adding 507432k swap on /dev/zram1. Priority:5 extents:1 across:507432k SS [ 14.587248] zram2: detected capacity change from 0 to 519614464 [ 14.598857] Adding 507432k swap on /dev/zram2. Priority:5 extents:1 across:507432k SS [ 14.605494] zram3: detected capacity change from 0 to 519614464 [ 14.619799] Adding 507432k swap on /dev/zram3. Priority:5 extents:1 across:507432k SS [ 16.242198] r8168: eth0: link up [ 16.242224] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.542209] tegradc tegradc.0: blank - powerdown [ 25.542219] tegradc tegradc.1: blank - powerdown [ 26.553982] fuse init (API version 7.26)