[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (root@skyangel) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #5 SMP PREEMPT Tue Aug 24 15:40:16 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06a0000 [ 0.000000] Found lut_mem: 00002008@a069a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06a0000 lut_mem=0x2008@0xa069a000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29196(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182600K/8124404K available (15358K kernel code, 2946K rwdata, 6616K rodata, 8576K init, 609K bss, 188140K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009600000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a140808 ( 2947 KB) [ 0.000000] .bss : 0xffffff800a140808 - 0xffffff800a1d8ebc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000781] Console: colour dummy device 80x25 [ 0.000792] console [tty0] enabled [ 0.000800] bootconsole [tegra_comb_uart0] disabled [ 0.000813] kmemleak: Kernel memory leak detector disabled [ 0.000832] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000848] pid_max: default: 32768 minimum: 301 [ 0.001970] Security Framework initialized [ 0.002565] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002599] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004254] ftrace: allocating 47259 entries in 185 pages [ 0.404207] sched-energy: Sched-energy-costs installed from DT [ 0.404226] ASID allocator initialised with 65536 entries [ 0.439032] tegra-id: chipid=21917. [ 0.439043] tegra-id: opt_subrevision=1. [ 0.439070] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.439085] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.439095] DTB Build time: Aug 26 2021 14:18:39 [ 0.487263] CPU1: Booted secondary processor [4e0f0040] [ 0.519336] CPU2: Booted secondary processor [4e0f0040] [ 0.551491] CPU3: Booted secondary processor [4e0f0040] [ 0.583730] CPU4: Booted secondary processor [4e0f0040] [ 0.615791] CPU5: Booted secondary processor [4e0f0040] [ 0.616062] Brought up 6 CPUs [ 0.616097] SMP: Total of 6 processors activated. [ 0.616113] CPU features: detected feature: Privileged Access Never [ 0.616120] CPU features: detected feature: LSE atomic instructions [ 0.616126] CPU features: detected feature: User Access Override [ 0.616132] CPU features: detected feature: 32-bit EL0 Support [ 0.617607] CPU: All CPU(s) started at EL2 [ 0.617655] alternatives: patching kernel code [ 0.624123] devtmpfs: initialized [ 0.665919] Initilizing CustomIPI irq domain [ 0.666173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.666191] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.678001] pinctrl core: initialized pinctrl subsystem [ 0.678264] OS set in device tree is not L4T. [ 0.678585] regulator-dummy: no parameters [ 0.678858] Initializing plugin-manager [ 0.678908] Plugin module not found [ 0.678946] Plugin-manager status disabled [ 0.679975] NET: Registered protocol family 16 [ 0.681246] pstore: using zlib compression [ 0.681265] console [pstore-1] enabled [ 0.681270] pstore: Registered ramoops as persistent store backend [ 0.681276] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.694522] cpuidle: using governor menu [ 0.695395] bpmp: waiting for handshake [ 0.695402] bpmp: handshake completed [ 0.695416] bpmp: synchronizing channels [ 0.695425] bpmp: channels synchronized [ 0.695431] bpmp: mail init ok [ 0.697760] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.697933] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.697940] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.697947] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.697953] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.697959] t19x-arm-smmu 12000000.iommu: nested translation [ 0.697968] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.697976] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.697982] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.697990] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.697996] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.701864] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e64000) [ 0.701898] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.704473] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.705410] tegra_aon_clk_init: ok [ 0.705423] Registering BPMP clocks... [ 0.705529] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.706169] Serial: AMBA PL011 UART driver [ 0.706295] tegra_powergate_init: DONE [ 0.706362] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.706378] DTB Build time: Aug 26 2021 14:18:39 [ 0.709433] Tegra reboot handler registered. [ 0.717235] iommu: Adding device 14160000.pcie to group 0 [ 0.717920] iommu: Adding device 141a0000.pcie to group 1 [ 0.719351] iommu: Adding device 2490000.ether_qos to group 2 [ 0.719824] iommu: Adding device 3100000.serial to group 3 [ 0.720410] iommu: Adding device 3110000.serial to group 4 [ 0.720814] iommu: Adding device 3140000.serial to group 5 [ 0.721552] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.721764] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.721785] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.721791] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.721801] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.721849] tegra-pmc: PMC Prod config success [ 0.722076] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.722089] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.722434] iommu: Adding device 3460000.sdhci to group 6 [ 0.722975] iommu: Adding device 3440000.sdhci to group 7 [ 0.723501] iommu: Adding device 3210000.spi to group 8 [ 0.723929] iommu: Adding device 3230000.spi to group 9 [ 0.724328] iommu: Adding device 3270000.spi to group 10 [ 0.725570] iommu: Adding device 3160000.i2c to group 11 [ 0.726006] iommu: Adding device c240000.i2c to group 12 [ 0.726527] iommu: Adding device 3180000.i2c to group 13 [ 0.726970] iommu: Adding device 3190000.i2c to group 14 [ 0.727557] iommu: Adding device 31b0000.i2c to group 15 [ 0.727942] iommu: Adding device 31c0000.i2c to group 16 [ 0.728339] iommu: Adding device c250000.i2c to group 17 [ 0.728769] iommu: Adding device 31e0000.i2c to group 18 [ 0.729295] iommu: Adding device sound to group 19 [ 0.729863] iommu: Adding device 3510000.hda to group 20 [ 0.730374] iommu: Adding device bc00000.rtcpu to group 21 [ 0.732235] iommu: Adding device 13e10000.host1x to group 22 [ 0.732727] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.733150] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.733494] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.733948] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.734372] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.734727] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.735182] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.735520] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.736096] iommu: Adding device 15340000.vic to group 31 [ 0.736473] iommu: Adding device 15380000.nvjpg to group 32 [ 0.736754] iommu: Adding device 15500000.tsec to group 33 [ 0.737029] iommu: Adding device 15100000.tsecb to group 34 [ 0.737291] iommu: Adding device 15480000.nvdec to group 35 [ 0.737576] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.737855] iommu: Adding device 154c0000.nvenc to group 37 [ 0.738153] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.738577] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.739018] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.739580] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.739736] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06a0000(800000) [ 0.739747] platform 15200000.nvdisplay: IOVA linear map 0x00000000a069a000(3000) [ 0.743729] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.743811] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.744571] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.744645] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.746671] iommu: Adding device 15c10000.vi to group 43 [ 0.746856] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.747286] iommu: Adding device 14800000.isp to group 44 [ 0.748651] iommu: Adding device 16000000.pva0 to group 45 [ 0.749197] iommu: Adding device 16800000.pva1 to group 46 [ 0.749605] iommu: Adding device 15810000.se to group 47 [ 0.749981] iommu: Adding device 15820000.se to group 48 [ 0.750325] iommu: Adding device 15830000.se to group 49 [ 0.750640] iommu: Adding device 15840000.se to group 50 [ 0.750915] iommu: Adding device c1a0000.aon to group 51 [ 0.753042] iommu: Adding device d000000.bpmp to group 52 [ 0.753394] bpmp: ping status is 0 [ 0.753522] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.756576] bpmp d000000.bpmp: probe ok [ 0.758198] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.758625] iommu: Adding device smmu_test to group 53 [ 0.759749] mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000 [ 0.759773] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000 [ 0.759792] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000 [ 0.759814] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.759837] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.759859] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000 [ 0.759878] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000 [ 0.759896] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000 [ 0.759914] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000 [ 0.759935] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000 [ 0.759952] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000 [ 0.759988] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000 [ 0.760006] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000 [ 0.760053] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000 [ 0.760067] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000 [ 0.760082] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000 [ 0.760117] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000 [ 0.760189] mc-err: mcerr ops are set to t19x [ 0.766157] iommu: Adding device 2600000.dma to group 54 [ 0.771448] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.772707] GPIO line 339 (wifi-enable) hogged as output/high [ 0.772749] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.772785] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.773113] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.781652] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.781727] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.781763] GPIO line 266 (w-disable1) hogged as output/high [ 0.781795] GPIO line 264 (w-disable2) hogged as output/high [ 0.781827] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.782177] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.784720] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.784733] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.784745] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.785628] iommu: Adding device 3550000.xudc to group 55 [ 0.786351] iommu: Adding device 3610000.xhci to group 56 [ 0.788557] arm64_ras arm64_ras: probed [ 0.788949] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.788992] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.789082] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.789154] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.789228] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.789324] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.789503] carmel_ras_enable: RAS enabled on cpu0 [ 0.789671] carmel_ras_enable: RAS enabled on cpu1 [ 0.789852] carmel_ras_enable: RAS enabled on cpu2 [ 0.790033] carmel_ras_enable: RAS enabled on cpu3 [ 0.790263] carmel_ras_enable: RAS enabled on cpu4 [ 0.790469] carmel_ras_enable: RAS enabled on cpu5 [ 0.790568] carmel_ras carmel_ras: probed [ 0.791585] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.792168] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.793017] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.793758] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.794522] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.794884] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.796279] vdd-ac-bat: 5000 mV [ 0.796706] vdd-sdmmc1-sw: 3300 mV [ 0.797016] vdd-1v8-sd: 1800 mV [ 0.797340] vdd-3v3-cvb: 3300 mV [ 0.797647] vdd-1v8-cvb: 1800 mV [ 0.798031] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.798090] vdd-epb-1v0: 1000 mV [ 0.798479] avdd-cam-2v8: 2800 mV [ 0.798805] vdd-fan: 5000 mV [ 0.799100] vdd-hdmi-5v0: 5000 mV [ 0.799388] vdd_sys_en: 1200 mV [ 0.844900] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.849769] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.850200] SCSI subsystem initialized [ 0.850455] libata version 3.00 loaded. [ 0.850671] usbcore: registered new interface driver usbfs [ 0.850720] usbcore: registered new interface driver hub [ 0.850812] usbcore: registered new device driver usb [ 0.861603] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.864488] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.875700] vdd-1v0: at 1000 mV [ 0.880515] vdd-1v8-hs: at 1800 mV [ 0.884589] vdd-1v8-ls: at 1800 mV [ 0.888567] vdd-1v8-ao: at 1800 mV [ 0.892630] vddio-ddr-1v1: at 1100 mV [ 0.896374] vdd-rtc: at 800 mV [ 0.897633] spmic-ldo1: at 2375 mV [ 0.904420] vdd-ao-3v3: at 3300 mV [ 0.912480] vddio-emmc-3v3: at 3300 mV [ 0.913863] spmic-ldo4: at 1587 mV [ 0.920485] vdd-usb-3v3: at 3300 mV [ 0.928540] vddio-sdmmc1-3v3: at 3300 mV [ 0.932590] vdd-csi-1v2: at 1200 mV [ 0.934186] spmic-ldo8: at 1800 mV [ 0.939266] GPIO line 246 (gpio_default) hogged as output/high [ 0.940664] GPIO line 247 (gpio_default) hogged as output/high [ 0.941024] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.941443] max77620 4-003c: max77620 probe successful [ 0.941928] media: Linux media interface: v0.10 [ 0.941987] Linux video capture interface: v2.00 [ 0.943279] pps_core: LinuxPPS API ver. 1 registered [ 0.943285] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.943304] PTP clock support registered [ 0.943515] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.943792] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.943839] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.946537] trusty trusty: trusty version: Built: 08:40:57 Feb 19 2021 [ 0.946600] trusty trusty: selected api version: 3 (requested 3) [ 0.947856] Advanced Linux Sound Architecture Driver Initialized. [ 0.948523] Bluetooth: Core ver 2.22 [ 0.948565] NET: Registered protocol family 31 [ 0.948571] Bluetooth: HCI device and connection manager initialized [ 0.948581] Bluetooth: HCI socket layer initialized [ 0.948589] Bluetooth: L2CAP socket layer initialized [ 0.948675] Bluetooth: SCO socket layer initialized [ 0.951435] camchar: rtcpu character device driver loaded [ 0.951931] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.952024] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.952917] clocksource: Switched to clocksource arch_sys_counter [ 1.002937] VFS: Disk quotas dquot_6.6.0 [ 1.003035] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.003406] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.004663] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.004711] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.005044] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.005054] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.005076] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.005084] nvmap_page_pool_init: Total RAM pages: 1984066 [ 1.005092] nvmap_page_pool_init: nvmap page pool size: 248008 pages (968 MB) [ 1.005288] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.005801] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.008009] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.020867] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.021155] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.021415] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.021599] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.021786] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.023011] la/ptsa driver initialized. [ 1.023433] NET: Registered protocol family 2 [ 1.024305] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.024642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.025257] TCP: Hash tables configured (established 65536 bind 65536) [ 1.025306] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.025421] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.025828] NET: Registered protocol family 1 [ 1.026580] RPC: Registered named UNIX socket transport module. [ 1.026586] RPC: Registered udp transport module. [ 1.026591] RPC: Registered tcp transport module. [ 1.026596] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.026606] PCI: CLS 0 bytes, default 64 [ 1.026810] Trying to unpack rootfs image as initramfs... [ 1.246759] Freeing initrd memory: 7064K [ 1.264701] random: fast init done [ 1.268835] host1x 13e10000.host1x: initialized [ 1.270584] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.275259] audit: initializing netlink subsys (disabled) [ 1.275306] audit: type=2000 audit(0.896:1): initialized [ 1.276041] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.286222] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.287477] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.288172] 9p: Installing v9fs 9p2000 file system support [ 1.292762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.293005] io scheduler noop registered [ 1.293314] io scheduler cfq registered (default) [ 1.296889] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.332296] iommu: Adding device 2993000.adsp to group 57 [ 1.438687] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.439677] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.452453] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.452884] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.453555] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.454008] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.454384] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.457387] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.457603] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.460631] tsec 15500000.tsec: initialized [ 1.462327] tsec 15100000.tsecb: initialized [ 1.466423] nvdec 15480000.nvdec: initialized [ 1.469257] nvdec 15140000.nvdec1: initialized [ 1.474941] falcon 15340000.vic: initialized [ 1.476852] falcon 15380000.nvjpg: initialized [ 1.478743] falcon 154c0000.nvenc: initialized [ 1.480790] falcon 15a80000.nvenc1: initialized [ 1.484778] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.487614] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.489649] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.491287] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.493040] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.494759] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.496823] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.498561] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.502174] t194-nvcsi 15a00000.nvcsi: initialized [ 1.507758] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.508160] scare-pigeon 14b00000.isp-thi: initialized [ 1.513731] pva 16000000.pva0: initialized [ 1.519167] pva 16800000.pva1: initialized [ 1.523936] nvdla 15880000.nvdla0: initialized [ 1.528591] nvdla 158c0000.nvdla1: initialized [ 1.530148] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.530161] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.530194] tegradccommon 15200000.dc_common: dma mapping done [ 1.530484] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.530494] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.530763] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.530788] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.531079] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.531088] tegra_cec 3960000.tegra_cec: probed [ 1.531730] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.531785] generic_infoframe_type: 0x87 [ 1.531890] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.531961] tegradc 15200000.nvdisplay: Display dc.ffffff800bd10000 registered with id=0 [ 1.536784] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.536796] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.536802] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.537072] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.537083] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.537925] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.540241] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.540250] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.542514] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.543272] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.543287] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.543915] kfuse 3830000.kfuse: initialized [ 1.546278] tegradc 15200000.nvdisplay: probed [ 1.549109] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.551688] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.552815] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.554047] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.555993] console [ttyTCU0] enabled [ 1.556398] [drm] Initialized [ 1.578217] brd: module loaded [ 1.584028] loop: module loaded [ 1.584121] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.584280] tegra_profiler: auth: init [ 1.585279] THERMAL EST: found 3 subdevs [ 1.585286] THERMAL EST num_resources: 0 [ 1.585292] [THERMAL EST subdev 0] [ 1.585297] [THERMAL EST subdev 1] [ 1.585302] [THERMAL EST subdev 2] [ 1.585311] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.585776] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.585781] THERMAL EST: thz register success. [ 1.585991] THERMAL EST: end of probe, return err: 0 [ 1.586762] sd: No Scsi addr parsed to reserve index [ 1.586800] hisi_sas: driver version v1.6 [ 1.594269] Console: switching to colour frame buffer device 240x67 [ 1.594408] tegradc 15200000.nvdisplay: fb registered [ 1.594656] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.595625] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.595704] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.596516] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.596525] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.596534] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.596888] 1 ofpart partitions found on MTD device spi6.0 [ 1.596894] Creating 1 MTD partitions on "spi6.0": [ 1.596979] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.598694] Parent Clock set for DC plld2 [ 1.600014] libphy: Fixed MDIO Bus: probed [ 1.601534] tun: Universal TUN/TAP device driver, 1.6 [ 1.601540] tun: (C) 1999-2004 Max Krasnyansky [ 1.602311] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.602316] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.602350] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.602354] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.602386] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.602390] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.602427] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.602431] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.657193] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.657784] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.657797] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.683315] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.683321] Extcon AUX1(HDMI) enable [ 1.683661] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.683689] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.683756] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.683817] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 1.684068] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.684077] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.692243] tegradc 15210000.nvdisplay: probed [ 1.692572] tegradc 15210000.nvdisplay: fb registered [ 1.695843] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.695852] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.695862] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.695873] tegradc 15210000.nvdisplay: blank - powerdown [ 1.695909] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.695913] Extcon DP: HPD disabled [ 1.695918] hpd: hpd_switch 0 [ 1.695923] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.695934] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.695942] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.815993] tegradc 15200000.nvdisplay: blank - powerdown [ 1.847844] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.848367] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 15 cf 24 [ 1.848466] libphy: dwc_phy: probed [ 1.850766] PPP generic driver version 2.4.2 [ 1.851142] PPP BSD Compression module registered [ 1.851146] PPP Deflate Compression module registered [ 1.851163] PPP MPPE Compression module registered [ 1.851167] NET: Registered protocol family 24 [ 1.851224] usbcore: registered new interface driver r8152 [ 1.851274] usbcore: registered new interface driver asix [ 1.851309] usbcore: registered new interface driver ax88179_178a [ 1.851334] usbcore: registered new interface driver cdc_ether [ 1.851382] usbcore: registered new interface driver net1080 [ 1.851411] usbcore: registered new interface driver cdc_subset [ 1.851465] usbcore: registered new interface driver zaurus [ 1.851530] usbcore: registered new interface driver cdc_ncm [ 1.851750] VFIO - User Level meta-driver version: 0.3 [ 1.853102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.853120] ehci-pci: EHCI PCI platform driver [ 1.853159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.853170] ohci-pci: OHCI PCI platform driver [ 1.853204] ohci-platform: OHCI generic platform driver [ 1.857545] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.857549] Extcon AUX1(HDMI) disable [ 1.857860] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.859763] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4e5e800 id [ 1.860305] usbcore: registered new interface driver uas [ 1.860346] usbcore: registered new interface driver usb-storage [ 1.860410] usbcore: registered new interface driver usbserial [ 1.860441] usbcore: registered new interface driver cdc_xr_usb_serial [ 1.860443] xr_usb_serial_common: Exar USB UART (serial port) driver [ 1.862103] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.862158] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.862175] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.862904] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.862943] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.863155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.863160] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.863164] usb usb1: Product: xHCI Host Controller [ 1.863168] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.863172] usb usb1: SerialNumber: 3610000.xhci [ 1.863556] hub 1-0:1.0: USB hub found [ 1.863600] hub 1-0:1.0: 4 ports detected [ 1.864143] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.864152] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.864160] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.864386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.864391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.864394] usb usb2: Product: xHCI Host Controller [ 1.864399] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.864402] usb usb2: SerialNumber: 3610000.xhci [ 1.864835] hub 2-0:1.0: USB hub found [ 1.864872] hub 2-0:1.0: 4 ports detected [ 1.865614] Wake76 for irq=199 [ 1.865619] Wake77 for irq=199 [ 1.865621] Wake78 for irq=199 [ 1.865624] Wake79 for irq=199 [ 1.865626] Wake80 for irq=199 [ 1.865628] Wake81 for irq=199 [ 1.865630] Wake82 for irq=199 [ 1.865686] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.865692] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.866276] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.866349] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.867158] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.867176] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.867399] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.867407] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.868103] mousedev: PS/2 mouse device common for all mice [ 1.868233] usbcore: registered new interface driver xpad [ 1.883860] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.885055] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.906163] tegradc 15200000.nvdisplay: unblank [ 1.907820] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.908115] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.916584] Parent Clock set for DC plld2 [ 1.921327] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.922734] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.957548] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.957552] Extcon AUX1(HDMI) enable [ 1.969232] usb usb2: usb_suspend_both: status 0 [ 1.972939] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.998994] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.999000] Extcon HDMI: HPD enabled [ 1.999020] tegradc 15200000.nvdisplay: hdmi: plugged [ 2.001595] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.003189] Wake73 for irq=42 [ 2.004484] rtc rtc1: alarm rtc device [ 2.004504] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.004534] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.004688] i2c /dev entries driver [ 2.006912] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.007341] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.007348] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.007822] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.188954] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.218322] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 2.218330] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.218337] usb 1-2: Product: 4-Port USB 2.1 Hub [ 2.218343] usb 1-2: Manufacturer: Generic [ 2.219281] hub 1-2:1.0: USB hub found [ 2.219888] hub 1-2:1.0: 4 ports detected [ 2.329276] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.357844] usb 2-3: New USB device found, idVendor=0bda, idProduct=0411 [ 2.357852] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.357857] usb 2-3: Product: 4-Port USB 3.1 Hub [ 2.357863] usb 2-3: Manufacturer: Generic [ 2.363716] hub 2-3:1.0: USB hub found [ 2.364812] hub 2-3:1.0: 4 ports detected [ 2.472983] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 2.494610] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 2.494618] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.494624] usb 1-3: Product: USB2.0 Hub [ 2.495601] hub 1-3:1.0: USB hub found [ 2.495941] hub 1-3:1.0: 4 ports detected [ 2.524952] usb 2-3: usb_suspend_both: status 0 [ 2.525152] usb usb2: usb_suspend_both: status 0 [ 2.548967] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.572946] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 2.598801] usb 1-2.2: New USB device found, idVendor=1a2c, idProduct=2d23 [ 2.598809] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.598815] usb 1-2.2: Product: USB Keyboard [ 2.598843] usb 1-2.2: Manufacturer: USB [ 2.613525] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.613560] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.680953] usb 1-2.4: new low-speed USB device number 5 using tegra-xusb [ 2.705060] usb 1-2.4: New USB device found, idVendor=0461, idProduct=4e84 [ 2.705068] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.705073] usb 1-2.4: Product: USB Optical Mouse [ 2.705079] usb 1-2.4: Manufacturer: PixArt [ 2.784989] usb 1-3.2: new full-speed USB device number 6 using tegra-xusb [ 2.806934] usb 1-3.2: New USB device found, idVendor=04e2, idProduct=1420 [ 2.806943] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.806949] usb 1-3.2: Product: Exar USB UART [ 2.806954] usb 1-3.2: Manufacturer: Exar Corp. [ 2.806960] usb 1-3.2: SerialNumber: N294029052 [ 2.808171] cdc_xr_usb_serial 1-3.2:1.0: USB_device_id idVendor:04e2, idProduct 1420 [ 2.808177] =============usb exar [ 2.808184] cdc_xr_usb_serial 1-3.2:1.0: This device cannot do calls on its own. It is not a modem. [ 2.808472] =============usb exar union_header else [ 2.808477] =============usb exar 1 [ 2.808481] =============usb exar 2 [ 2.808485] =============usb exar 3 [ 2.808489] =============usb exar 4 [ 2.808493] =============usb exar 5 [ 2.808499] cdc_xr_usb_serial 1-3.2:1.0: The data interface has switched endpoints [ 2.808504] cdc_xr_usb_serial 1-3.2:1.0: interfaces are valid [ 2.808509] =============usb exar 6 [ 2.808513] =============usb exar 7 [ 2.808520] cdc_xr_usb_serial 1-3.2:1.0: epwrite->bEndpointAddress =4 [ 2.808535] =============usb exar 8 [ 2.808704] =============usb exar 9 [ 2.808737] cdc_xr_usb_serial 1-3.2:1.0: ttyXR_USB_SERIAL0: USB XR_USB_SERIAL device [ 2.809181] cdc_xr_usb_serial 1-3.2:1.0: xr_usb_serial_ctrl_msg - rq 0x22, val 0x0, len 0x0, result 0 [ 2.809339] cdc_xr_usb_serial 1-3.2:1.0: xr_usb_serial_ctrl_msg - rq 0x20, val 0x0, len 0x7, result 7 [ 12.116951] tegra-i2c 3180000.i2c: pio timed out addr: 0x10 tlen:28 rlen:4 [ 12.117168] tegra-i2c 3180000.i2c: --- register dump for debugging ---- [ 12.117346] tegra-i2c 3180000.i2c: I2C_CNFG - 0x22c00 [ 12.117486] tegra-i2c 3180000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 12.117661] tegra-i2c 3180000.i2c: I2C_FIFO_CONTROL - 0x0 [ 12.117838] tegra-i2c 3180000.i2c: I2C_FIFO_STATUS - 0x800080 [ 12.118013] tegra-i2c 3180000.i2c: I2C_MST_FIFO_CONTROL - 0x70000 [ 12.118177] tegra-i2c 3180000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 12.118369] tegra-i2c 3180000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 12.118542] tegra-i2c 3180000.i2c: I2C_INT_MASK - 0x7d [ 12.118705] tegra-i2c 3180000.i2c: I2C_INT_STATUS - 0x2 [ 12.118848] tegra-i2c 3180000.i2c: i2c transfer timed out addr: 0x10 [ 12.119093] imx219 9-0010: imx219_board_setup: error during i2c read probe (-110) [ 12.119426] imx219 9-0010: board setup failed [ 12.119644] imx219: probe of 9-0010 failed with error -110 [ 12.120103] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 22.356956] tegra-i2c 3180000.i2c: pio timed out addr: 0x10 tlen:28 rlen:4 [ 22.357184] tegra-i2c 3180000.i2c: --- register dump for debugging ---- [ 22.357369] tegra-i2c 3180000.i2c: I2C_CNFG - 0x22c00 [ 22.357515] tegra-i2c 3180000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 22.357694] tegra-i2c 3180000.i2c: I2C_FIFO_CONTROL - 0x0 [ 22.357843] tegra-i2c 3180000.i2c: I2C_FIFO_STATUS - 0x800080 [ 22.357999] tegra-i2c 3180000.i2c: I2C_MST_FIFO_CONTROL - 0x70000 [ 22.358165] tegra-i2c 3180000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 22.358333] tegra-i2c 3180000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 22.358513] tegra-i2c 3180000.i2c: I2C_INT_MASK - 0x7d [ 22.358656] tegra-i2c 3180000.i2c: I2C_INT_STATUS - 0x2 [ 22.358801] tegra-i2c 3180000.i2c: i2c transfer timed out addr: 0x10 [ 22.359048] imx219 10-0010: imx219_board_setup: error during i2c read probe (-110) [ 22.359385] imx219 10-0010: board setup failed [ 22.359615] imx219: probe of 10-0010 failed with error -110 [ 22.361069] max77620-power max20024-power: Event recorder REG_NVERC : 0xeb [ 22.367524] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 22.367905] FAN dev name: pwm-fan [ 22.367950] FAN:gpio request success. [ 22.367959] FAN: can't find tach_gpio [ 22.367968] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 22.368007] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 22.368226] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 22.368232] pwm_fan_driver pwm-fan: tach period: 1000 [ 22.368777] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 22.368785] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 22.368791] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 22.368797] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 22.368803] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 22.368809] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 22.368815] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 22.368821] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 22.368827] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 22.368834] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 22.369524] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 22.370531] device-mapper: uevent: version 1.0.3 [ 22.370974] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 22.374611] tegra194_cpufreq_probe: platform driver Initialization: pass [ 22.375622] cpuidle: Initializing cpuidle driver [ 22.376583] sdhci: Secure Digital Host Controller Interface driver [ 22.376587] sdhci: Copyright(c) Pierre Ossman [ 22.376590] sdhci-pltfm: SDHCI platform and OF driver helper [ 22.377588] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 22.379388] CMDQ: cmdq_platfm_init successful [ 22.379987] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 22.382013] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 22.384057] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 322 [ 22.388082] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 22.390177] tegra-se-nvhost 15810000.se: initialized [ 22.391308] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 22.392020] tegra-se-nvhost 15820000.se: initialized [ 22.393120] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 22.394035] tegra-se-nvhost 15830000.se: initialized [ 22.394652] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 22.395294] tegra-se-nvhost 15840000.se: initialized [ 22.396172] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 22.396476] hidraw: raw HID events driver (C) Jiri Kosina [ 22.401127] input: USB USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:2D23.0001/input/input0 [ 22.420988] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 22.429052] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 22.429130] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 22.461432] hid-generic 0003:1A2C:2D23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-3610000.xhci-2.2/input0 [ 22.464955] input: USB USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:2D23.0002/input/input1 [ 22.467404] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 22.480698] mmc0: periodic cache flush enabled [ 22.480710] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 22.481226] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 22.485469] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 22.485655] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 22.485829] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 22.490796] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 22.525277] hid-generic 0003:1A2C:2D23.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keyboard] on usb-3610000.xhci-2.2/input1 [ 22.527335] input: PixArt USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.0/0003:0461:4E84.0003/input/input2 [ 22.527650] hid-generic 0003:0461:4E84.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3610000.xhci-2.4/input0 [ 22.527714] usbcore: registered new interface driver usbhid [ 22.527717] usbhid: USB HID core driver [ 22.531939] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 22.533110] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 22.533536] tegra186-aondbg aondbg: aondbg driver probe() OK [ 22.534100] denver_knobs_init:MTS_VERSION:51035886 [ 22.534250] tegra19x_actmon d230000.actmon: in actmon_register()... [ 22.535025] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 22.535406] t19x_cache tegra-cache: probed [ 22.538250] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 22.538258] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 22.538750] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 22.539147] PLL_AON clock registered [ 22.540312] Clocks initialized successfully [ 22.541738] nvpmodel: initialized successfully [ 22.542846] trusty-virtio trusty:virtio: initializing [ 22.543047] trusty_ipc virtio0: vring0: va(pa) ffffffc1e1114000(0) qsz 32 notifyid 1 [ 22.543058] trusty_ipc virtio0: vring1: va(pa) ffffffc1e1116000(0) qsz 32 notifyid 2 [ 22.543218] trusty-virtio trusty:virtio: initializing done [ 22.543454] trusty_ipc virtio0: is online [ 22.543903] tegra-hda 3510000.hda: Override SDO lines to 4 [ 22.544427] usbcore: registered new interface driver snd-usb-audio [ 22.572120] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input3 [ 22.572297] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input4 [ 22.572466] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input5 [ 22.572625] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input6 [ 22.648583] OPE platform probe [ 22.648678] OPE platform probe successful [ 22.724545] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 22.724674] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 22.724820] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 22.724980] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 22.725094] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 22.725207] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 22.725319] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 22.725442] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 22.725580] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 22.725672] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 22.725782] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 22.725889] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 22.725996] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 22.726091] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 22.726175] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 22.726263] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 22.726347] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 22.726434] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 22.726521] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 22.726633] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 22.754723] u32 classifier [ 22.754730] Actions configured [ 22.754812] Initializing XFRM netlink socket [ 22.755410] NET: Registered protocol family 10 [ 22.756187] NET: Registered protocol family 17 [ 22.756201] NET: Registered protocol family 15 [ 22.756255] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 22.756328] Bluetooth: RFCOMM socket layer initialized [ 22.756354] Bluetooth: RFCOMM ver 1.11 [ 22.756361] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 22.756368] Bluetooth: HIDP socket layer initialized [ 22.756386] 9pnet: Installing 9P2000 support [ 22.756425] Key type dns_resolver registered [ 22.756694] Registered cp15_barrier emulation handler [ 22.756706] Registered setend emulation handler [ 22.758060] registered taskstats version 1 [ 22.758487] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 22.759590] OF: PCI: host bridge /pcie@14160000 ranges: [ 22.759608] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 22.759615] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 22.759620] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 22.868970] tegra-pcie-dw 14160000.pcie: link is up [ 22.869258] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 22.869267] pci_bus 0004:00: root bus resource [bus 00-ff] [ 22.869275] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 22.869282] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 22.869306] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 22.869333] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 22.869513] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 22.869711] iommu: Adding device 0004:00:00.0 to group 59 [ 22.870112] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 22.870230] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 22.870234] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 22.870392] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 22.871116] pci 0004:01:00.0: supports D1 D2 [ 22.871120] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 22.871436] iommu: Adding device 0004:01:00.0 to group 60 [ 22.886484] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 22.886493] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 22.886501] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 22.886583] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 22.886611] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 22.886617] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 22.886625] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 22.886643] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 22.886703] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 22.887030] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 22.887035] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 22.887041] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 22.887137] aer 0004:00:00.0:pcie002: service driver aer loaded [ 22.887760] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 22.888786] OF: PCI: host bridge /pcie@141a0000 ranges: [ 22.888803] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 22.888810] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 22.888815] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 22.996956] tegra-pcie-dw 141a0000.pcie: link is up [ 22.997218] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 22.997226] pci_bus 0005:00: root bus resource [bus 00-ff] [ 22.997234] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 22.997240] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 22.997244] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 22.997268] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 22.997394] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 22.997581] iommu: Adding device 0005:00:00.0 to group 61 [ 22.997901] pci 0005:01:00.0: [1987:5012] type 00 class 0x010802 [ 22.998013] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 22.998932] iommu: Adding device 0005:01:00.0 to group 62 [ 23.009754] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 23.009762] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 23.009820] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 23.009828] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 23.009843] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 23.009885] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 23.010100] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 23.010104] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 23.010110] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 23.010248] aer 0005:00:00.0:pcie002: service driver aer loaded [ 23.010679] nvme nvme0: pci function 0005:01:00.0 [ 23.010711] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 23.020420] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 23.025167] tegra194-isp5 14800000.isp: initialized [ 23.031991] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 23.034884] tegra194-vi5 15c10000.vi: initialized [ 23.039278] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 23.039353] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 23.039588] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 23.043797] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 23.043811] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 23.043815] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 23.043883] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 23.043924] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 23.043928] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 23.048058] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 23.048095] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 23.048100] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 23.048399] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 23.048442] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 23.048447] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 23.048790] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 23.048824] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 23.048829] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 23.049111] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 23.049905] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 23.088955] usb 1-3.1: new full-speed USB device number 7 using tegra-xusb [ 23.110026] usb 1-3.1: New USB device found, idVendor=0bda, idProduct=c822 [ 23.110032] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 23.110036] usb 1-3.1: Product: Bluetooth Radio [ 23.110040] usb 1-3.1: Manufacturer: Realtek [ 23.110044] usb 1-3.1: SerialNumber: 00e04c000001 [ 23.133552] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 23.133871] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 23.134116] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 23.134339] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 23.134840] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 23.134910] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 23.135272] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 23.135277] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 23.136427] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 23.136782] Wake83 for irq=211 [ 23.136869] gpio tegra-gpio wake67 for gpio=48(G:0) [ 23.137004] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 23.137155] input: gpio-keys as /devices/gpio-keys/input/input7 [ 23.170029] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:35 UTC (946688435) [ 23.170461] mmcblk mmc0:0001: Card claimed for testing. [ 23.207332] bpmp: mounted debugfs mirror [ 23.213218] ALSA device list: [ 23.213226] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 23.213229] #1: jetson-xaviernx-ape [ 23.214759] Freeing unused kernel memory: 8576K [ 23.253056] Root device found: mmcblk0p1 [ 23.254731] Found dev node: /dev/mmcblk0p1 [ 23.534067] EXT4-fs (mmcblk0p1): 24 orphan inodes deleted [ 23.534074] EXT4-fs (mmcblk0p1): recovery complete [ 23.541932] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 23.544979] Rootfs mounted over mmcblk0p1 [ 23.567014] Switching from initrd to actual rootfs [ 23.658046] systemd[1]: System time before build time, advancing clock. [ 23.685119] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.688752] cgroup: cgroup2: unknown option "nsdelegate" [ 23.698119] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 23.698825] systemd[1]: Detected architecture arm64. [ 23.704743] systemd[1]: No hostname configured. [ 23.704782] systemd[1]: Set hostname to . [ 23.782274] systemd[1]: Configuration file /etc/systemd/system/qbic-shutdown.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 23.785033] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 23.785046] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 23.940820] systemd[1]: Configuration file /etc/systemd/system/setsdroot.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 23.945660] random: systemd: uninitialized urandom read (16 bytes read) [ 23.946014] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 23.946155] random: systemd: uninitialized urandom read (16 bytes read) [ 23.946282] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 23.946347] random: systemd: uninitialized urandom read (16 bytes read) [ 23.981326] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 24.323549] systemd-journald[2411]: Received request to flush runtime journal from PID 1 [ 24.472014] soctherm: OC ALARM 0x00000002 [ 24.498753] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 24.512646] cpu-throttle-alert cooling device registered. [ 24.513368] gpu-throttle-alert cooling device registered. [ 24.513644] aux-throttle-alert cooling device registered. [ 25.089492] using random self ethernet address [ 25.089692] using random host ethernet address [ 25.113241] FAN rising trip_level:1 cur_temp:46100 trip_temps[2]:60000 [ 25.360820] random: crng init done [ 25.360986] random: 7 urandom warning(s) missed due to ratelimiting [ 25.517722] soctherm: OC ALARM 0x00000002 [ 25.613803] Mass Storage Function, version: 2009/09/11 [ 25.613812] LUN: removable file: (no medium) [ 25.626983] using random self ethernet address [ 25.627178] using random host ethernet address [ 25.723784] rndis0: HOST MAC 62:1a:33:f1:70:10 [ 25.724620] rndis0: MAC 62:1a:33:f1:70:11 [ 25.728256] usb0: HOST MAC 62:1a:33:f1:70:12 [ 25.728476] usb0: MAC 62:1a:33:f1:70:13 [ 25.728510] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 25.736867] l4tbr0: port 1(rndis0) entered blocking state [ 25.736874] l4tbr0: port 1(rndis0) entered disabled state [ 25.738048] device rndis0 entered promiscuous mode [ 25.745194] rtl88x2ce 0004:01:00.0: enabling device (0000 -> 0003) [ 25.752512] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 25.757753] l4tbr0: port 2(usb0) entered blocking state [ 25.757760] l4tbr0: port 2(usb0) entered disabled state [ 25.758724] device usb0 entered promiscuous mode [ 25.766669] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 25.977564] ras_fhi_disable: FHI 474 disabled [ 25.978329] CPU4: shutdown [ 25.978502] psci: CPU4 killed. [ 26.030584] ras_fhi_disable: FHI 475 disabled [ 26.036438] CPU5: shutdown [ 26.052994] psci: Retrying again to check for CPU kill [ 26.053013] psci: CPU5 killed. [ 26.055491] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 26.175554] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.291998] zram: Added device: zram0 [ 26.295186] zram: Added device: zram1 [ 26.297949] zram: Added device: zram2 [ 26.299361] zram: Added device: zram3 [ 26.342363] zram0: detected capacity change from 0 to 1017843712 [ 26.403206] Adding 993984k swap on /dev/zram0. Priority:5 extents:1 across:993984k SS [ 26.406325] zram1: detected capacity change from 0 to 1017843712 [ 26.421585] Adding 993984k swap on /dev/zram1. Priority:5 extents:1 across:993984k SS [ 26.436796] zram2: detected capacity change from 0 to 1017843712 [ 26.452564] Adding 993984k swap on /dev/zram2. Priority:5 extents:1 across:993984k SS [ 26.459288] zram3: detected capacity change from 0 to 1017843712 [ 26.478689] Adding 993984k swap on /dev/zram3. Priority:5 extents:1 across:993984k SS [ 26.490521] gpio tegra-gpio wake20 for gpio=52(G:4) [ 26.496565] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.044296] usbcore: registered new interface driver cdc_acm [ 27.044303] cdc_acm: qbic qbicUSB Abstract Control Model driver for USB modems and ISDN adapters [ 27.186099] usbcore: registered new interface driver btusb [ 27.212606] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 27.212612] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 27.212615] rtk_btcoex: create workqueue [ 27.222390] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 27.222490] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 27.222494] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 1 [ 27.222498] rtk_btusb: patch_add [ 27.222502] rtk_btusb: auto suspend is disabled [ 27.222507] rtk_btusb: pid = 0xc822 [ 27.222512] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 27.222523] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 27.231332] rtk_btusb: btusb_probe: done [ 27.231348] rtk_btusb: btusb_open start [ 27.231354] rtk_btusb: btusb_open hdev->promisc ==0 [ 27.231357] rtk_btusb: download_patch start [ 27.231363] rtk_btusb: chip type value: 0x73 [ 27.231368] rtk_btusb: HCI reset. [ 27.231406] usbcore: registered new interface driver rtk_btusb [ 27.242772] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 27.242779] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 27.242783] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 27.242786] rtk_btusb: load_firmware start [ 27.242789] rtk_btusb: lmp_version = 0x8822 [ 27.242792] rtk_btusb: config filename rtl8822cu_config [ 27.244394] rtk_btusb: no bdaddr file /opt/bdaddr [ 27.244403] rtk_btusb: 55 ab 23 87 00 00 [ 27.244418] rtk_btusb: Config file length 6, new length 6 [ 27.244421] rtk_btusb: fw name is rtl8822cu_fw [ 27.245089] rtk_btusb: This is not 8723a, use new patch style! [ 27.245095] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 27.245754] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 27.245760] rtk_btusb: load_firmware: New gEVersion 3 [ 27.245763] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 27.245768] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 27.245771] rtk_btusb: fw_version = 0x98a42f7 [ 27.245773] rtk_btusb: number_of_total_patch = 3 [ 27.245776] rtk_btusb: chipID 4 [ 27.245779] rtk_btusb: patch_length 0x55f0 [ 27.245782] rtk_btusb: start_offset 0x00005d00 [ 27.245785] rtk_btusb: Svn version: 21761 [ 27.245789] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 27.245795] rtk_btusb: buf_len = 0x55f6 [ 27.245808] rtk_btusb: fw: exists, config file: exists [ 27.245811] rtk_btusb: load_firmware done [ 27.245832] rtk_btusb: download_data start [ 27.364790] rtk_btusb: download_data done [ 27.364797] rtk_btusb: HCI reset. [ 27.375795] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 27.375801] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 27.375805] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 27.375814] rtk_btusb: Rtk patch end 0 [ 27.375817] rtk_btusb: btusb_open set HCI_RUNNING [ 27.375849] rtk_btcoex: Open BTCOEX [ 27.375852] rtk_btusb: btusb_open end [ 27.377859] rtk_btcoex: BTCOEX hci_rev 0x098a [ 27.377864] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 27.397803] rtk_btusb: btusb_notify: hci0 evt 3 [ 27.422989] tegradc 15200000.nvdisplay: unblank [ 27.423000] tegradc 15210000.nvdisplay: blank - powerdown [ 28.188147] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.253476] fuse init (API version 7.26) [ 28.348829] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.348844] Bluetooth: BNEP socket layer initialized [ 28.495176] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.594740] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.829266] FAN rising trip_level:1 cur_temp:46250 trip_temps[2]:60000 [ 36.264506] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 36.265160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.561275] tegradc 15200000.nvdisplay: blank - powerdown [ 41.623527] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 41.623534] Extcon AUX1(HDMI) disable [ 41.648578] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 41.649660] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 41.649907] tegradc 15210000.nvdisplay: blank - powerdown [ 41.796744] tegradc 15200000.nvdisplay: blank - powerdown [ 41.796758] tegradc 15200000.nvdisplay: unblank [ 41.797601] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 41.797734] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 41.799635] Parent Clock set for DC plld2 [ 41.806146] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 41.807906] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 41.843722] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 41.843725] Extcon AUX1(HDMI) enable [ 41.843840] tegradc 15200000.nvdisplay: unblank [ 41.843851] tegradc 15210000.nvdisplay: blank - powerdown [ 47.300051] tegradc 15200000.nvdisplay: unblank [ 47.300063] tegradc 15210000.nvdisplay: blank - powerdown [ 52.892392] soctherm: OC ALARM 0x00000002 [ 54.111007] soctherm: OC ALARM 0x00000002 [ 54.613167] vdd-sdmmc1-sw: disabling [ 54.613176] vdd-1v8-sd: disabling [ 54.613182] vdd-1v8-cvb: disabling [ 54.613189] vdd-epb-1v0: disabling [ 54.613228] avdd-cam-2v8: disabling [ 54.613233] vdd_sys_en: disabling [ 58.249952] soctherm: OC ALARM 0x00000002 [ 59.896605] soctherm: OC ALARM 0x00000002 [ 77.058322] soctherm: OC ALARM 0x00000002 [ 99.759501] soctherm: OC ALARM 0x00000002