[0161.743] I> MB1 (version: 0.23.0.0-t234-54845784-92215740)
[0161.749] I> t234-A01-0-Silicon (0x12347) Prod
[0161.753] I> Boot-mode : BPMP Diagnostic
[0161.757] I> Emulation: 
[0161.759] I> Entry timestamp: 0x00000000
[0161.763] I> last_boot_error: 0x0
[0161.766] I> BR-BCT: preprod_dev_sign: 0
[0161.770] I> rst_source: 0x0, rst_level: 0x0
[0161.774] I> Task: Crypto init (0x5001c0d9)
[0161.778] I> Task: Secure debug controls (0x5000cb19)
[0161.783] I> Task: strap war set (0x5000b739)
[0161.787] I> strap value(0x4000001) set to 0x4000001
[0161.792] I> Task: Program NV master stream id (0x5000cad1)
[0161.797] I> Task: Verify boot mode (0xd482021)
[0161.803] I> Task: Alias fuses (0x50010749)
[0161.808] E> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0161.815] I> Task: Print SKU type (0x5000fba9)
[0161.820] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000
[0161.825] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[0161.829] I> FUSE_OPT_TPC_DISABLE = 0x00000000
[0161.833] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[0161.838] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[0161.842] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0161.846] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0161.850] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0161.854] I> FUSE_SKU_INFO_0 = 0xd0
[0161.858] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0161.862] I> FUSE_PACKAGE_INFO_0 = 0x2
[0161.865] I> SKU: Prod
[0161.868] I> Task: Boost clocks (0x50013db1)
[0161.872] I> Initializing PLLC2 for AXI_CBB.
[0161.876] I> AXI_CBB : src = 35, divisor = 0
[0161.880] I> Task: Voltage monitor (0x50013dbd)
[0161.884] I> VMON: Vmon re-calibration and fine tuning done
[0161.890] I> Task: UPHY init (0x5000da39)
[0161.894] E> UPHY: UPHY lane info table is empty in MB1 BCT.
[0161.899] I> Task: Boot device init (0x50000a3d)
[0161.904] I> Boot_device: RCM
[0161.907] I> USB configuration success
[0166.757] I> Task: TSC init (0x5001ed35)
[0166.761] I> Task: Enable WDT 5th expiry (0x5001f929)
[0166.766] I> Task: Disable WDT globally (0x5001f965)
[0166.771] I> Task: I2C register (0x50000a31)
[0166.775] I> Task: Reset FSI (0x50013db9)
[0166.779] I> Task: Enable clock-mon (0x5001ed25)
[0166.794] I> FMON: Fmon re-programming done
[0166.798] I> Task: MB1 fixed firewalls (0x5001e55d)
[0166.806] I> Task: Load MB2/Applet/FSKP (0x5000d451)
[0166.811] I> Loading MB2 Applet
[0166.814] I> Scratch RSV109: 0x00000000    active chain: 0
[0166.819] I> Slot: 0
[0166.821] I> Binary[21] block-0 (partition size: 0x50000)
[0166.827] I>  get_binary_info: Binary name: MB2-Applet
[0166.831] I> Size of crypto header is 8192
[0166.835] I> BCH load address is : 0x4004e000
[0166.840] I> Size of crypto header is 8192
[0167.600] I> BCH of MB2-Applet read from storage
[0167.605] I> BCH address is : 0x4004e000
[0167.609] I> MB2-Applet header integrity check is success
[0167.614] I> Binary magic in BCH component 0 is MB2A
[0167.619] I> component binary type is 21
[0167.623] I> Size of crypto header is 8192
[0167.636] I> MB2-Applet binary is read from storage
[0167.641] I> MB2-Applet binary integrity check is success
[0167.647] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b80)
[0167.653] I> Task: Map CCPLEX SHARED carveout (0x5000d521)
[0167.659] I> Task: Prepare MB2 params (0x5000d5dd)
[0167.664] I> MB2-params @ 0x40060000
[0167.667] I> Region(2) already mapped
[0167.671] E> Failed to map carveout: 50
[0167.675] I> BR-BCT Boot Chain Fields
[0167.678] I> 	 u32_non_gpio_select_boot_chain  : 0
[0167.683] I> 	 u32_num_boot_chains             : 0
[0167.687] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[0167.693] I> Task: Misc NV security settings (0x5000ced5)
[0167.698] I> NVDEC sticky bits programming done
[0167.702] I> Task: Disable/Reload WDT (0x5001f991)
[0167.707] I> Programmed SLCG global override := 0x0
[0167.712] I> MB1: MSS reconfig completed
I> Applet (version: 0.0.0.0-t234-54845784-dee653cf)
I> t234-A01-0-Silicon (0x12347)
I> Emulation: 
I> Entry timestamp: 0xffffffff
I> Task: Pinmux init (0x4000062d)
I> Task: Boot device init (0x400012e5)
I> Applet do storage init
I> Boot_device: QSPI_FLASH instance: 0
I> Qspi clock source : clk_m
I> QSPI-0l initialized successfully
I> sdmmc DDR50 mode
I> sdmmc bdev is already initialized
E> Unknown device 7
E> Unknown device 8
I> Task: Partition Manager Init (0x40002d1d)
I> Found 57 partitions in QSPI_FLASH (instance 0)
W> Cannot find any partition table for 00000003
 > PARTITION_MANAGER: Failed to publish partition.
I> Found 11 partitions in SDMMC_USER (instance 3)
I> Task: I2C register (0x400006a5)
I> Task: Register exit handlers (0x400005f5)
I> Task: Enter 3p server (0x400018e1)
I> USB configuration success
I> Populate chip info
I> RAM_CODE 0x4000001
I> Populate eeprom info
I> Populate eeprom info for module cvm
I> dump bct
I> Rebooting : reboot-recovery