[0000.270] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c700205d) [0000.279] I> bit @ 0xd480000 [0000.282] I> Boot-device: eMMC [0000.289] I> sdmmc bdev is already initialized [0000.294] I> pmic: reset reason (nverc) : 0x40 [0000.325] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.344] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.350] W> No valid slot number is found in scratch register [0000.356] W> Return default slot: _a [0000.359] I> A/B: bin_type (16) slot 0 [0000.363] I> Loading partition bpmp-fw at 0xd7800000 [0000.368] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.373] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.398] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.404] W> No valid slot number is found in scratch register [0000.409] W> Return default slot: _a [0000.413] I> A/B: bin_type (17) slot 0 [0000.416] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.422] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.427] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.453] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.682] I> Loading SCE-FW ... [0000.685] W> No valid slot number is found in scratch register [0000.691] W> Return default slot: _a [0000.694] I> A/B: bin_type (12) slot 0 [0000.698] I> Loading partition sce-fw at 0xd7300000 [0000.702] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.708] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.727] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.733] I> Init SCE [0000.735] I> Loading APE-FW ... [0000.738] W> No valid slot number is found in scratch register [0000.744] W> Return default slot: _a [0000.747] I> A/B: bin_type (11) slot 0 [0000.751] I> Loading partition adsp-fw at 0xd7400000 [0000.756] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.761] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.780] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.786] I> Copy BTCM section [0000.789] W> No valid slot number is found in scratch register [0000.795] W> Return default slot: _a [0000.798] I> A/B: bin_type (13) slot 0 [0000.802] I> Loading partition cpu-bootloader at 0x96000000 [0000.807] I> Reading two headers - addr:0x96000000 blocks:1 [0000.813] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.834] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.840] W> No valid slot number is found in scratch register [0000.845] W> Return default slot: _a [0000.849] I> A/B: bin_type (20) slot 0 [0000.852] I> Loading partition bootloader-dtb at 0x8520f400 [0000.858] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.863] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.886] I> Binary(20) of size 371424 is loaded @ 0x8520f400 [0000.891] W> No valid slot number is found in scratch register [0000.897] W> Return default slot: _a [0000.901] I> A/B: bin_type (14) slot 0 [0000.904] I> Loading partition secure-os at 0x8530f600 [0000.909] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.915] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.937] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.944] I> TOS boot-params @ 0x85000000 [0000.948] I> TOS params prepared [0000.952] I> Loading EKS ... [0000.954] I> A/B: bin_type (15) slot 0 [0000.958] I> Loading partition eks at 0x8590f800 [0000.962] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.968] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.987] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.992] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.997] I> Copied encrypted keys [0001.001] I> boot profiler @ 0x275844000 [0001.005] I> boot profiler for TOS @ 0x275844000 [0001.010] I> Unhalting SCE [0001.012] I> Primary Memory Start:80000000 Size:70000000 [0001.017] I> Extended Memory Start:f0110000 Size:1856f0000 [0001.024] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.397] I> Welcome to Cboot [0001.400] I> Cboot Version: t186-02737b3e [0001.403] I> CPU-BL Params @ 0x275800000 [0001.407] I> 0) Base:0x00000000 Size:0x00000000 [0001.412] I> 1) Base:0x277f00000 Size:0x00100000 [0001.416] I> 2) Base:0x277e00000 Size:0x00100000 [0001.421] I> 3) Base:0x277d00000 Size:0x00100000 [0001.425] I> 4) Base:0x277c00000 Size:0x00100000 [0001.430] I> 5) Base:0x277b00000 Size:0x00100000 [0001.434] I> 6) Base:0x277800000 Size:0x00200000 [0001.439] I> 7) Base:0x277400000 Size:0x00400000 [0001.443] I> 8) Base:0x277a00000 Size:0x00100000 [0001.448] I> 9) Base:0x277300000 Size:0x00100000 [0001.452] I> 10) Base:0x276800000 Size:0x00800000 [0001.457] I> 11) Base:0x30000000 Size:0x00040000 [0001.461] I> 12) Base:0xf0000000 Size:0x00100000 [0001.466] I> 13) Base:0x30040000 Size:0x00001000 [0001.470] I> 14) Base:0x30048000 Size:0x00001000 [0001.474] I> 15) Base:0x30049000 Size:0x00001000 [0001.479] I> 16) Base:0x3004a000 Size:0x00001000 [0001.483] I> 17) Base:0x3004b000 Size:0x00001000 [0001.488] I> 18) Base:0x3004c000 Size:0x00001000 [0001.492] I> 19) Base:0x3004d000 Size:0x00001000 [0001.497] I> 20) Base:0x3004e000 Size:0x00001000 [0001.501] I> 21) Base:0x3004f000 Size:0x00001000 [0001.506] I> 22) Base:0x00000000 Size:0x00000000 [0001.510] I> 23) Base:0xf0100000 Size:0x00010000 [0001.514] I> 24) Base:0x00000000 Size:0x00000000 [0001.519] I> 25) Base:0x00000000 Size:0x00000000 [0001.523] I> 26) Base:0x00000000 Size:0x00000000 [0001.528] I> 27) Base:0x00000000 Size:0x00000000 [0001.532] I> 28) Base:0x84400000 Size:0x00400000 [0001.537] I> 29) Base:0x30000000 Size:0x00010000 [0001.541] I> 30) Base:0x278000000 Size:0x08000000 [0001.545] I> 31) Base:0x00000000 Size:0x00000000 [0001.550] I> 32) Base:0x276000000 Size:0x00600000 [0001.554] I> 33) Base:0x80000000 Size:0x70000000 [0001.559] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.563] I> 35) Base:0x00000000 Size:0x00000000 [0001.568] I> 36) Base:0x00000000 Size:0x00000000 [0001.572] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.577] I> 38) Base:0x84000000 Size:0x00400000 [0001.581] I> 39) Base:0x96000000 Size:0x02000000 [0001.586] I> 40) Base:0x85000000 Size:0x01200000 [0001.590] I> 41) Base:0x275800000 Size:0x00500000 [0001.595] I> 42) Base:0x00000000 Size:0x00000000 [0001.599] I> 43) Base:0x00000000 Size:0x00000000 [0001.603] GIC-SPI Target CPU: 4 [0001.607] Interrupts Init done [0001.610] calling constructors [0001.613] initializing heap [0001.616] initializing threads [0001.619] initializing timers [0001.622] creating bootstrap completion thread [0001.627] top of bootstrap2() [0001.630] CPU: ARM Cortex A57 [0001.633] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.638] initializing platform [0001.641] I> Bl_dtb @0x8520f400 [0001.644] I> gpio framework initialized [0001.651] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.661] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.669] I> GPIO framework and drivers are initialized. [0001.674] I> Boot-device: eMMC [0001.681] I> sdmmc bdev is already initialized [0001.711] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.729] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.734] W> opt-in fuse is not set, skip fuse_burning [0001.739] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.745] W> No valid slot number is found in scratch register [0001.751] W> Return default slot: _a [0001.754] I> A/B: bin_type (21) slot 0 [0001.758] I> Loading kernel-dtb from partition [0001.762] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.779] I> Kernel_dtb @0x80000000 [0001.782] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.793] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.800] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.809] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.819] I> fixed regulator driver initialized [0001.852] I> register 'maxim' power off handle [0001.858] I> virtual i2c enabled [0001.861] I> registered 'maxim,max77620' pmic [0001.865] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.879] I> Find /i2c@c250000's alias i2c7 [0001.883] I> Reading eeprom i2c=7 address=0x50 [0001.912] I> Device at /i2c@c250000:0x50 [0001.916] I> Reading eeprom i2c=7 address=0x57 [0001.920] E> I2C: slave not found in slaves. [0001.924] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.932] E> I2C_DEV: Failed to send register address 0x00000000. [0001.938] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.948] E> eeprom: Failed to read I2C slave device [0001.952] I> Eeprom read failed 0x3526070d [0001.957] I> Find /i2c@c240000's alias i2c1 [0001.961] I> Reading eeprom i2c=1 address=0x51 [0001.966] E> I2C: slave not found in slaves. [0001.970] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.978] E> I2C_DEV: Failed to send register address 0x00000000. [0001.984] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.993] E> eeprom: Retry to read I2C slave device. [0001.998] E> I2C: slave not found in slaves. [0002.002] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.010] E> I2C_DEV: Failed to send register address 0x00000000. [0002.016] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.025] E> eeprom: Failed to read I2C slave device [0002.030] I> Eeprom read failed 0x3526070d [0002.035] I> Find /i2c@3160000's alias i2c0 [0002.039] I> Reading eeprom i2c=0 address=0x50 [0002.043] E> I2C: slave not found in slaves. [0002.047] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.055] E> I2C_DEV: Failed to send register address 0x00000000. [0002.061] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.070] E> eeprom: Failed to read I2C slave device [0002.075] I> Eeprom read failed 0x3526070d [0002.080] I> Find /i2c@3180000's alias i2c2 [0002.084] I> Reading eeprom i2c=2 address=0x54 [0002.088] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.094] E> I2C: slave not found in slaves. [0002.098] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0002.106] E> I2C_DEV: Failed to send register address 0x00000000. [0002.112] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0002.121] E> eeprom: Failed to read I2C slave device [0002.126] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.131] I> Eeprom read failed 0x00000000 [0002.135] I> Reading eeprom i2c=2 address=0x57 [0002.140] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.145] E> I2C: slave not found in slaves. [0002.149] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.157] E> I2C_DEV: Failed to send register address 0x00000000. [0002.163] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.172] E> eeprom: Failed to read I2C slave device [0002.177] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.182] I> Eeprom read failed 0x00000000 [0002.186] I> create_pm_ids: id: 3310-1000-D00-E, len: 15 [0002.191] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.226] I> enabling 'vdd-hdmi' regulator [0002.242] I> regulator 'vdd-hdmi' already enabled [0002.246] I> hdmi cable connected [0002.255] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.267] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.276] E> cannot find any other nvdisp nodes [0002.297] I> edid read success [0002.312] I> edid read success [0002.315] I> width = 640, height = 480, frequency = 25174825 [0002.321] I> width = 640, height = 480, frequency = 25174825 [0002.326] I> width = 640, height = 480, frequency = 25174825 [0002.332] I> width = 640, height = 480, frequency = 25174825 [0002.337] I> width = 2560, height = 1440, frequency = 241500000 [0002.343] I> width = 2560, height = 1440, frequency = 296000000 [0002.348] I> width = 1920, height = 1080, frequency = 148500000 [0002.354] I> width = 1920, height = 1080, frequency = 148351648 [0002.360] I> width = 1920, height = 1080, frequency = 148351648 [0002.366] I> width = 1280, height = 720, frequency = 74175824 [0002.371] I> width = 1280, height = 720, frequency = 74175824 [0002.377] I> width = 720, height = 480, frequency = 26973026 [0002.382] I> width = 720, height = 576, frequency = 26973026 [0002.388] I> width = 720, height = 480, frequency = 26973026 [0002.393] I> width = 720, height = 576, frequency = 26973026 [0002.399] I> width = 640, height = 480, frequency = 25174825 [0002.404] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.414] I> hdmi_enable, starting HDMI initialisation [0002.422] I> hdmi_enable, HDMI initialisation complete [0002.435] initializing target [0002.438] calling apps_init() [0002.441] starting app kernel_boot_app [0002.463] I> found decompressor handler: lz4-legacy [0002.468] I> decompressing BMP blob ... [0002.478] I> Kernel type = Normal [0002.481] I> Loading kernel-bootctrl from partition [0002.486] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.500] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.507] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.514] I> ########## Fixed storage boot ########## [0002.519] W> No valid slot number is found in scratch register [0002.525] W> Return default slot: _a [0002.528] I> A/B: bin_type (24) slot 0 [0002.544] I> Boot image size read from image header: 74aba [0002.549] I> Boot image load address: 0x80400000 [0002.553] I> Loading kernel from partition [0002.557] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.517] I> Validate kernel ... [0003.520] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.528] I> kernel-dtb is already loaded [0003.531] I> Validate kernel-dtb ... [0003.535] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.542] I> Checking boot.img header magic ... [0003.547] I> [OK] [0003.548] I> Kernel hdr @0x80400000 [0003.552] I> Kernel dtb @0x80000000 [0003.555] I> decompressor handler not found [0003.559] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80600000 ... [0003.567] I> Done [0003.568] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000 [0003.576] I> Updated bpmp info to DTB [0003.581] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.586] I> Updated initrd info to DTB [0003.590] W> WARN: Fail to override "console=none" in commandline [0003.596] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.603] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.610] I> disabled_core_mask: 0xffffff0c [0003.614] W> No valid slot number is found in scratch register [0003.620] W> Return default slot: _a [0003.623] I> Active slot suffix: [0003.626] I> add_boot_slot_suffix: slot_suffix = [0003.631] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.681] I> Updated bootarg info to DTB [0003.684] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:dd:ba:af [0003.691] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:dd:ba:b0 [0003.697] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:dd:ba:b1 [0003.703] E> Found no plugin manager ids in source DT [0003.708] W> Add plugin manager ids from board info [0003.713] W> "plugin-manager" doesn't exist, creating [0003.718] W> "ids" doesn't exist, creating [0003.722] W> "connection" doesn't exist, creating [0003.726] W> "configs" doesn't exist, creating [0003.731] I> create_pm_ids: id: 3310-1000-D00-E, len: 15 [0003.736] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.747] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.754] W> "i2c@c250000" doesn't exist, creating [0003.759] W> "module@0x50" doesn't exist, creating [0003.766] I> Adding plugin-manager/ids/3310-1000-D00-E [0003.773] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.778] I> Adding plugin-manager/configs/3310-power-config 00 [0003.784] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.790] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.796] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.802] I> Adding plugin-manager/configs/3310-display-config 00 [0003.808] I> Adding plugin-manager/cvm [0003.812] W> "chip-id" doesn't exist, creating [0003.816] I> Adding plugin-manager/chip-id/A02P [0003.821] W> "odm-data" doesn't exist, creating [0003.825] I> Adding /chosen/plugin-manager/odm-data [0003.835] I> added [base:0x80000000, size:0x70000000] to /memory [0003.841] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.847] I> added [base:0x275e00000, size:0x200000] to /memory [0003.853] I> added [base:0x276600000, size:0x200000] to /memory [0003.858] I> added [base:0x277000000, size:0x200000] to /memory [0003.864] I> Updated memory info to DTB [0003.869] E> add_disp_param: failed to get display params for du=1 [0003.877] W> "reset" doesn't exist, creating [0003.881] W> "pmc-reset-reason" doesn't exist, creating [0003.886] W> "pmic-reset-reason" doesn't exist, creating [0003.893] I> Adding ecid(000000016459c446000000000e0483c0) to DT [0003.898] I> disabled_core_mask: 0xffffff0c [0003.911] I> Add serial number:0420919027487 as DT property [0003.920] I> Plugin-manager override starting [0003.926] I> node /plugin-manager/fragement@0 matches [0003.936] I> node /plugin-manager/fragement@4 matches [0003.949] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.969] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.978] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.987] I> node /plugin-manager/fragment-devslp@0 matches [0003.999] I> node /plugin-manager/fragment-500-pcie-config matches [0004.014] I> node /plugin-manager/fragment-500-xusb-config matches [0004.037] I> node /plugin-manager/fragment-p3310-c00-comm matches [0004.050] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0004.061] I> node /plugin-manager/fragment-p3310-c01 matches [0004.074] I> node /plugin-manager/fragment-p3310-c03 matches [0004.113] I> node /plugin-manager/fragment-p3310-c00-camera matches [0004.139] I> Disable plugin-manager status in FDT [0004.144] I> Plugin-manager override finished successfully [0004.149] I> tegrabl_load_kernel_and_dtb: Done [0004.194] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-ge6da093be3 (Jun 25 2020 - 21:14:32 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1169 bytes read in 108 ms (9.8 KiB/s) L4T boot options 1: primary kernel 2: Custom 40-pin Header Config Enter choice: 2: Custom 40-pin Header Config Retrieving file: /boot/initrd 5565615 bytes read in 248 ms (21.4 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 861 ms (38 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 Retrieving file: /boot/tegra186-quill-p3310-1000-c03-00-base-user-custom.dtb ** File not found /boot/tegra186-quill-p3310-1000-c03-00-base-user-custom.dtb ** Skipping JetsonIO for failure retrieving fdt 1: primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 248 ms (21.4 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 861 ms (38 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008005fa73 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 3.778046] cgroup: cgroup2: unknown option "nsdelegate" [ 4.936344] using random self ethernet address [ 4.943218] using random host ethernet address [ 5.465773] using random self ethernet address [ 5.473398] using random host ethernet address [ 6.023982] CPU1: shutdown [ 6.092960] CPU2: shutdown [ 7.672539] tegra_nvdisp_program_final_bw_settings: LA/PTSA failed w/ bw=1060400 KB/s,freq=20400000 Hz [ 8.984898] vdd-1v8: voltage operation not allowed [ 8.989823] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.017369] vdd-1v8: voltage operation not allowed [ 9.022244] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.046253] vdd-1v8: voltage operation not allowed [ 9.051096] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.060773] vdd-1v8: voltage operation not allowed [ 9.065667] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.176897] vdd-1v8: voltage operation not allowed [ 9.181746] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.189510] vdd-1v8: voltage operation not allowed [ 9.194335] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 9.203110] vdd-1v8: voltage operation not allowed [ 9.208294] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.4 LTS nvidia-desktop ttyS0 nvidia-desktop login: nvidia 密码: 上一次登录: 一 12月 14 19:03:19 CST 2020 ttyS0 上 Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 329 packages can be updated. 205 updates are security updates. nvidia@nvidia-desktop:~$