Info: [ Disk Avail:404.66 GB ]
Info: change working directory to /home/dylan/nvidia/nvidia_sdk/JetPack_4.4_DP_Linux_DP_JETSON_NANO_DEVKIT/Linux_for_Tegra
Info: [ Component Install Started ]
Info: current working directory is /home/dylan/nvidia/nvidia_sdk/JetPack_4.4_DP_Linux_DP_JETSON_NANO_DEVKIT/Linux_for_Tegra
Info: exec_command [host]:
**********************
#!/bin/bash
set -e
set -e
if [ -e  ./bootloader/system.img ]; then
    echo sudo ./flash.sh --no-systemimg jetson-nano-qspi-sd mmcblk0p1
    sudo ./flash.sh --no-systemimg jetson-nano-qspi-sd mmcblk0p1
else
    echo sudo ./flash.sh jetson-nano-qspi-sd mmcblk0p1
    sudo ./flash.sh jetson-nano-qspi-sd mmcblk0p1
fi
sleep 20
**********************
Info: exec_command: /tmp/tmp_NV_L4T_FLASH_NANO_DEVKIT_WITH_OS_IMAGE_COMP.sh
sudo ./flash.sh jetson-nano-qspi-sd mmcblk0p1
###############################################################################
# L4T BSP Information:
# R32 , REVISION: 4.2
###############################################################################
# Target Board Information:
# Name: jetson-nano-qspi-sd, Board Family: t210ref, SoC: Tegra 210, 
# OpMode: production, Boot Authentication: , 
###############################################################################
./tegraflash.py --chip 0x21 --applet "/home/dylan/nvidia/nvidia_sdk/JetPack_4.4_DP_Linux_DP_JETSON_NANO_DEVKIT/Linux_for_Tegra/bootloader/nvtboot_recovery.bin" --skipuid --cmd "dump eeprom boardinfo cvm.bin" 
Reading board information failed.
Info: [ Component Install Finished with Error ]
Info: [ 8.00 KB used. Disk Avail: 404.66 GB ]
Info: [ NV_L4T_FLASH_NANO_DEVKIT_WITH_OS_IMAGE_COMP Install took 0s ]
Error: [error]: Run commands failed at step Install: command /tmp/tmp_NV_L4T_FLASH_NANO_DEVKIT_WITH_OS_IMAGE_COMP.sh finished with error