############################################################################### # L4T BSP Information: # R32 , REVISION: 6.1 ############################################################################### # Target Board Information: # Name: jetson-agx-xavier-devkit, Board Family: t186ref, SoC: Tegra 194, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying soft_fuses(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-soft-fuses-l4t.cfg)... done. ./tegraflash.py --chip 0x19 --applet "/home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod.bin" --skipuid --soft_fuses tegra194-mb1-soft-fuses-l4t.cfg --bins "mb2_applet nvtboot_applet_t194.bin" --cmd "dump eeprom boardinfo cvm.bin;reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0026 ] Generating RCM messages [ 0.0034 ] tegrahost_v2 --chip 0x19 0 --magicid MB1B --appendsigheader /home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod.bin zerosbk [ 0.0039 ] Header already present for /home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod.bin [ 0.0061 ] [ 0.0081 ] tegrasign_v3.py --getmode mode.txt --key None [ 0.0081 ] Assuming zero filled SBK key [ 0.0100 ] tegrasign_v3.py --file /home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod_sigheader.bin --key None --length 1136 --offset 2960 --pubkeyhash pub_key.key [ 0.0100 ] Assuming zero filled SBK key [ 0.0136 ] tegrahost_v2 --chip 0x19 0 --updatesigheader /home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod_sigheader.bin /home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod_sigheader.hash zerosbk [ 0.0163 ] [ 0.0182 ] tegrabct_v2 --chip 0x19 0 --sfuse tegra194-mb1-soft-fuses-l4t.cfg.pdf sfuse.bin [ 0.0188 ] [ 0.0205 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x19 0 --sfuses sfuse.bin --download rcm /home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod_sigheader.bin 0 0 [ 0.0210 ] RCM 0 is saved as rcm_0.rcm [ 0.0232 ] RCM 1 is saved as rcm_1.rcm [ 0.0233 ] RCM 2 is saved as rcm_2.rcm [ 0.0233 ] List of rcm files are saved in rcm_list.xml [ 0.0233 ] [ 0.0233 ] Signing RCM messages [ 0.0252 ] tegrasign_v3.py --getmontgomeryvalues montgomery.bin --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.0252 ] Assuming zero filled SBK key [ 0.0301 ] Copying signature to RCM mesages [ 0.0319 ] tegrarcm_v2 --chip 0x19 0 --updatesig rcm_list_signed.xml [ 0.0328 ] [ 0.0328 ] Boot Rom communication [ 0.0346 ] tegrarcm_v2 --chip 0x19 0 --rcm rcm_list_signed.xml --skipuid [ 0.0352 ] RCM version 0X190001 [ 0.0360 ] Boot Rom communication completed [ 1.0527 ] [ 2.0563 ] tegrarcm_v2 --isapplet [ 2.0572 ] Applet version 01.00.0000 [ 2.0593 ] [ 2.0615 ] tegrarcm_v2 --ismb2 [ 2.0640 ] [ 2.0660 ] tegrahost_v2 --chip 0x19 --align nvtboot_applet_t194.bin [ 2.0667 ] [ 2.0686 ] tegrahost_v2 --chip 0x19 0 --magicid PLDT --appendsigheader nvtboot_applet_t194.bin zerosbk [ 2.0693 ] adding BCH for nvtboot_applet_t194.bin [ 2.0742 ] [ 2.0768 ] tegrasign_v3.py --key None --list nvtboot_applet_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 2.0768 ] Assuming zero filled SBK key [ 2.0805 ] tegrahost_v2 --chip 0x19 0 --updatesigheader nvtboot_applet_t194_sigheader.bin.encrypt nvtboot_applet_t194_sigheader.bin.hash zerosbk [ 2.0822 ] [ 2.0839 ] tegrarcm_v2 --download mb2 nvtboot_applet_t194_sigheader.bin.encrypt [ 2.0845 ] Applet version 01.00.0000 [ 2.0863 ] Sending mb2 [ 2.0863 ] [................................................] 100% [ 2.1020 ] [ 2.1039 ] tegrarcm_v2 --boot recovery [ 2.1044 ] Applet version 01.00.0000 [ 2.1098 ] [ 3.1125 ] tegrarcm_v2 --isapplet [ 3.1153 ] [ 3.1172 ] tegrarcm_v2 --ismb2 [ 3.1178 ] MB2 Applet version 01.00.0000 [ 3.1200 ] [ 3.1218 ] tegrarcm_v2 --ismb2 [ 3.1224 ] MB2 Applet version 01.00.0000 [ 3.1245 ] [ 3.1263 ] Retrieving board information [ 3.1281 ] tegrarcm_v2 --oem platformdetails chip chip_info.bin [ 3.1287 ] MB2 Applet version 01.00.0000 [ 3.1330 ] Saved platform info in chip_info.bin [ 3.1373 ] Chip minor revision: 2 [ 3.1374 ] Bootrom revision: 0xf [ 3.1375 ] Ram code: 0x1 [ 3.1376 ] Chip sku: 0x99 [ 3.1377 ] Chip Sample: non es [ 3.1382 ] [ 3.1384 ] Retrieving EEPROM data [ 3.1384 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/anson/xavier_linux_for_tegra/bootloader/cvm.bin [ 3.1390 ] MB2 Applet version 01.00.0000 [ 3.1433 ] Saved platform info in /home/anson/xavier_linux_for_tegra/bootloader/cvm.bin [ 3.1779 ] [ 3.1780 ] Rebooting to recovery mode [ 3.1801 ] tegrarcm_v2 --ismb2 [ 3.1806 ] MB2 Applet version 01.00.0000 [ 3.1828 ] [ 3.1829 ] Rebooting to recovery mode [ 3.1846 ] tegrarcm_v2 --reboot recovery [ 3.1850 ] MB2 Applet version 01.00.0000 [ 3.1941 ] Copy /home/anson/xavier_linux_for_tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb to /home/anson/xavier_linux_for_tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb.rec copying bctfile(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-memcfg-p2888.cfg)... done. copying bctfile1(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-memcfg-sw-override.cfg)... done. copying uphy_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg)... done. copying minratchet_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg)... done. copying device_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra19x-mb1-bct-device-sdmmc.cfg)... done. copying misc_cold_boot_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-misc-l4t.cfg)... done. copying misc_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-misc-flash.cfg)... done. copying pinmux_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg)... done. copying gpioint_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg)... done. copying pmic_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-pmic-p2888-0001-a01-p2822-0000.cfg)... done. copying pmc_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg)... done. copying prod_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg)... done. copying scr_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-scr-cbb-mini.cfg)... done. copying scr_cold_boot_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-scr-cbb-mini.cfg)... done. copying bootrom_config(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg)... done. copying dev_params(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-br-bct-sdmmc.cfg)... done. Existing bootloader(/home/anson/xavier_linux_for_tegra/bootloader/nvtboot_cpu_t194.bin) reused. copying initrd(/home/anson/xavier_linux_for_tegra/bootloader/l4t_initrd.img)... done. Making Boot image... done. /home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py --chip 0x19 --key --minratchet_config tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg --cmd sign boot.img kernel Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0003 ] Generating signature [ 0.0024 ] tegrasign_v3.py --getmode mode.txt --key [ 0.0024 ] Assuming zero filled SBK key : not reading [ 0.0023 ] Generating ratchet blob [ 0.0041 ] tegrabct_v2 --chip 0x19 0 --ratchet_blob ratchet_blob.bin --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 0.0046 ] FwIndex: 1, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 2, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 3, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 4, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 5, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 6, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 7, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 11, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 12, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 13, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 14, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 15, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 16, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 17, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 18, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 19, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 30, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 31, MinRatchetLevel: 0 [ 0.0047 ] FwIndex: 32, MinRatchetLevel: 0 [ 0.0047 ] [ 0.0048 ] header_magic: 414e4452 [ 0.0065 ] tegrahost_v2 --chip 0x19 --align 1_boot.img [ 0.0072 ] [ 0.0089 ] tegrahost_v2 --chip 0x19 0 --magicid KRNL --ratchet_blob ratchet_blob.bin --appendsigheader 1_boot.img zerosbk [ 0.0094 ] adding BCH for 1_boot.img [ 0.6744 ] [ 0.6771 ] tegrasign_v3.py --key --list 1_boot_sigheader.img_list.xml --pubkeyhash pub_key.key [ 0.6771 ] Assuming zero filled SBK key : not reading [ 0.7444 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_boot_sigheader.img.encrypt 1_boot_sigheader.img.hash zerosbk [ 1.0939 ] [ 1.1158 ] Signed file: /home/anson/xavier_linux_for_tegra/bootloader/temp_user_dir/boot_sigheader.img.encrypt l4t_sign_image.sh: Generate header for boot_sigheader.img.encrypt l4t_sign_image.sh: chip 0x19: add 0x27db800 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for boot_sigheader.img.encrypt l4t_sign_image.sh: the signed file is /home/anson/xavier_linux_for_tegra/bootloader/temp_user_dir/boot_sigheader.img.encrypt done. Making recovery ramdisk for recovery image... Re-generating recovery ramdisk for recovery image... ~/xavier_linux_for_tegra/bootloader/ramdisk_tmp ~/xavier_linux_for_tegra/bootloader ~/xavier_linux_for_tegra _BASE_KERNEL_VERSION=4.9.253 ~/xavier_linux_for_tegra/bootloader/ramdisk_tmp/lib ~/xavier_linux_for_tegra/bootloader/ramdisk_tmp ~/xavier_linux_for_tegra/bootloader ~/xavier_linux_for_tegra Making Recovery image... copying recdtbfile(/home/anson/xavier_linux_for_tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb.rec)... done. Existing sosfile(/home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod.bin) reused. Existing tegraboot(/home/anson/xavier_linux_for_tegra/bootloader/nvtboot_t194.bin) reused. Existing cpu_bootloader(/home/anson/xavier_linux_for_tegra/bootloader/nvtboot_cpu_t194.bin) reused. Existing mb2blfile(/home/anson/xavier_linux_for_tegra/bootloader/nvtboot_recovery_t194.bin) reused. Existing mtspreboot(/home/anson/xavier_linux_for_tegra/bootloader/preboot_c10_prod_cr.bin) reused. Existing mcepreboot(/home/anson/xavier_linux_for_tegra/bootloader/mce_c10_prod_cr.bin) reused. Existing mtsproper(/home/anson/xavier_linux_for_tegra/bootloader/mts_c10_prod_cr.bin) reused. Existing mb1file(/home/anson/xavier_linux_for_tegra/bootloader/mb1_t194_prod.bin) reused. Existing bpffile(/home/anson/xavier_linux_for_tegra/bootloader/bpmp_t194.bin) reused. copying bpfdtbfile(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/tegra194-a02-bpmp-p2888-a01.dtb)... done. Existing scefile(/home/anson/xavier_linux_for_tegra/bootloader/camera-rtcpu-sce.img) reused. Existing camerafw(/home/anson/xavier_linux_for_tegra/bootloader/camera-rtcpu-rce.img) reused. Existing spefile(/home/anson/xavier_linux_for_tegra/bootloader/spe_t194.bin) reused. Existing wb0boot(/home/anson/xavier_linux_for_tegra/bootloader/warmboot_t194_prod.bin) reused. Existing tosfile(/home/anson/xavier_linux_for_tegra/bootloader/tos-trusty_t194.img) reused. Existing eksfile(/home/anson/xavier_linux_for_tegra/bootloader/eks.img) reused. copying soft_fuses(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/BCT/tegra194-mb1-soft-fuses-l4t.cfg)... done. copying dtbfile(/home/anson/xavier_linux_for_tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb)... done. Copying nv_boot_control.conf to rootfs /home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py --chip 0x19 --key --minratchet_config tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg --cmd sign kernel_tegra194-p2888-0001-p2822-0000.dtb kernel_dtb Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0004 ] Generating signature [ 0.0025 ] tegrasign_v3.py --getmode mode.txt --key [ 0.0025 ] Assuming zero filled SBK key : not reading [ 0.0025 ] Generating ratchet blob [ 0.0042 ] tegrabct_v2 --chip 0x19 0 --ratchet_blob ratchet_blob.bin --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 0.0047 ] FwIndex: 1, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 2, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 3, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 4, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 5, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 6, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 7, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 11, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 12, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 13, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 14, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 15, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 16, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 17, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 18, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 19, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 30, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 31, MinRatchetLevel: 0 [ 0.0048 ] FwIndex: 32, MinRatchetLevel: 0 [ 0.0048 ] [ 0.0049 ] header_magic: d00dfeed [ 0.0067 ] tegrahost_v2 --chip 0x19 --align 1_kernel_tegra194-p2888-0001-p2822-0000.dtb [ 0.0073 ] [ 0.0091 ] tegrahost_v2 --chip 0x19 0 --magicid KDTB --ratchet_blob ratchet_blob.bin --appendsigheader 1_kernel_tegra194-p2888-0001-p2822-0000.dtb zerosbk [ 0.0096 ] adding BCH for 1_kernel_tegra194-p2888-0001-p2822-0000.dtb [ 0.0142 ] [ 0.0165 ] tegrasign_v3.py --key --list 1_kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb_list.xml --pubkeyhash pub_key.key [ 0.0166 ] Assuming zero filled SBK key : not reading [ 0.0203 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt 1_kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.hash zerosbk [ 0.0233 ] [ 0.0237 ] Signed file: /home/anson/xavier_linux_for_tegra/bootloader/temp_user_dir/kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: Generate header for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: chip 0x19: add 0x45659 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: the signed file is /home/anson/xavier_linux_for_tegra/bootloader/temp_user_dir/kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt done. populating kernel to rootfs... done. populating initrd to rootfs... done. populating kernel_tegra194-p2888-0001-p2822-0000.dtb to rootfs... done. Making system.img... populating rootfs from /home/anson/xavier_linux_for_tegra/rootfs ... populating /boot/extlinux/extlinux.conf ... done. generating sig file of Image ... /home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py --chip 0x19 --key --minratchet_config tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg --cmd sign ./boot/Image kernel Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0005 ] Generating signature [ 0.0028 ] tegrasign_v3.py --getmode mode.txt --key [ 0.0029 ] Assuming zero filled SBK key : not reading [ 0.0028 ] Generating ratchet blob [ 0.0041 ] tegrabct_v2 --chip 0x19 0 --ratchet_blob ratchet_blob.bin --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 0.0047 ] FwIndex: 1, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 2, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 3, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 4, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 5, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 6, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 7, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 11, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 12, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 13, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 14, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 15, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 16, MinRatchetLevel: 0 [ 0.0082 ] FwIndex: 17, MinRatchetLevel: 0 [ 0.0083 ] FwIndex: 18, MinRatchetLevel: 0 [ 0.0083 ] FwIndex: 19, MinRatchetLevel: 0 [ 0.0083 ] FwIndex: 30, MinRatchetLevel: 0 [ 0.0083 ] FwIndex: 31, MinRatchetLevel: 0 [ 0.0083 ] FwIndex: 32, MinRatchetLevel: 0 [ 0.0083 ] [ 0.0088 ] header_magic: 805614 [ 0.0106 ] tegrahost_v2 --chip 0x19 --align 1_Image [ 0.0135 ] [ 0.0153 ] tegrahost_v2 --chip 0x19 0 --magicid KRNL --ratchet_blob ratchet_blob.bin --appendsigheader 1_Image zerosbk [ 0.0159 ] adding BCH for 1_Image [ 0.6275 ] [ 0.6306 ] tegrasign_v3.py --key --list 1_Image_sigheader_list.xml --pubkeyhash pub_key.key [ 0.6307 ] Assuming zero filled SBK key : not reading [ 0.6998 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_Image_sigheader.encrypt 1_Image_sigheader.hash zerosbk [ 0.9892 ] [ 1.0071 ] Signed file: /home/anson/xavier_linux_for_tegra/bootloader/mnt/Image_sigheader.encrypt l4t_sign_image.sh: Generate header for Image_sigheader.encrypt l4t_sign_image.sh: chip 0x19: add 0x20f3008 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for Image_sigheader.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/Image.sig done. done. generating sig file of kernel_tegra194-p2888-0001-p2822-0000.dtb ... /home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py --chip 0x19 --key --minratchet_config tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg --cmd sign ./boot/dtb/kernel_tegra194-p2888-0001-p2822-0000.dtb kernel_dtb Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0005 ] Generating signature [ 0.0025 ] tegrasign_v3.py --getmode mode.txt --key [ 0.0026 ] Assuming zero filled SBK key : not reading [ 0.0025 ] Generating ratchet blob [ 0.0042 ] tegrabct_v2 --chip 0x19 0 --ratchet_blob ratchet_blob.bin --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 0.0048 ] FwIndex: 1, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 2, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 3, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 4, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 5, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 6, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 7, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 11, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 12, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 13, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 14, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 15, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 16, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 17, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 18, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 19, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 30, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 31, MinRatchetLevel: 0 [ 0.0049 ] FwIndex: 32, MinRatchetLevel: 0 [ 0.0049 ] [ 0.0054 ] header_magic: d00dfeed [ 0.0073 ] tegrahost_v2 --chip 0x19 --align 1_kernel_tegra194-p2888-0001-p2822-0000.dtb [ 0.0080 ] [ 0.0098 ] tegrahost_v2 --chip 0x19 0 --magicid KDTB --ratchet_blob ratchet_blob.bin --appendsigheader 1_kernel_tegra194-p2888-0001-p2822-0000.dtb zerosbk [ 0.0103 ] adding BCH for 1_kernel_tegra194-p2888-0001-p2822-0000.dtb [ 0.0157 ] [ 0.0180 ] tegrasign_v3.py --key --list 1_kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb_list.xml --pubkeyhash pub_key.key [ 0.0181 ] Assuming zero filled SBK key : not reading [ 0.0219 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt 1_kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.hash zerosbk [ 0.0248 ] [ 0.0252 ] Signed file: /home/anson/xavier_linux_for_tegra/bootloader/mnt/kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: Generate header for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: chip 0x19: add 0x45659 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/dtb/kernel_tegra194-p2888-0001-p2822-0000.dtb.sig done. done. generating sig file of initrd ... /home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign ./boot/initrd data Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0004 ] Generating signature [ 0.0025 ] tegrasign_v3.py --getmode mode.txt --key [ 0.0026 ] Assuming zero filled SBK key : not reading [ 0.0030 ] header_magic: 1f8b0800 [ 0.0047 ] tegrahost_v2 --chip 0x19 --align 1_initrd [ 0.0056 ] [ 0.0073 ] tegrahost_v2 --chip 0x19 0 --magicid DATA --appendsigheader 1_initrd zerosbk [ 0.0079 ] adding BCH for 1_initrd [ 0.1360 ] [ 0.1387 ] tegrasign_v3.py --key --list 1_initrd_sigheader_list.xml --pubkeyhash pub_key.key [ 0.1387 ] Assuming zero filled SBK key : not reading [ 0.1527 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_initrd_sigheader.encrypt 1_initrd_sigheader.hash zerosbk [ 0.2129 ] [ 0.2169 ] Signed file: /home/anson/xavier_linux_for_tegra/bootloader/mnt/initrd_sigheader.encrypt l4t_sign_image.sh: Generate header for initrd_sigheader.encrypt l4t_sign_image.sh: chip 0x19: add 0x6e72c8 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for initrd_sigheader.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/initrd.sig done. done. generating sig file of extlinux.conf ... /home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign ./boot/extlinux/extlinux.conf data Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0004 ] Generating signature [ 0.0024 ] tegrasign_v3.py --getmode mode.txt --key [ 0.0024 ] Assuming zero filled SBK key : not reading [ 0.0024 ] header_magic: 54494d45 [ 0.0041 ] tegrahost_v2 --chip 0x19 --align 1_extlinux.conf [ 0.0047 ] [ 0.0064 ] tegrahost_v2 --chip 0x19 0 --magicid DATA --appendsigheader 1_extlinux.conf zerosbk [ 0.0070 ] adding BCH for 1_extlinux.conf [ 0.0070 ] [ 0.0094 ] tegrasign_v3.py --key --list 1_extlinux_sigheader.conf_list.xml --pubkeyhash pub_key.key [ 0.0095 ] Assuming zero filled SBK key : not reading [ 0.0130 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_extlinux_sigheader.conf.encrypt 1_extlinux_sigheader.conf.hash zerosbk [ 0.0136 ] [ 0.0138 ] Signed file: /home/anson/xavier_linux_for_tegra/bootloader/mnt/extlinux_sigheader.conf.encrypt l4t_sign_image.sh: Generate header for extlinux_sigheader.conf.encrypt l4t_sign_image.sh: chip 0x19: add 0x360 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for extlinux_sigheader.conf.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/extlinux/extlinux.conf.sig done. done. Sync'ing system.img ... done. Converting RAW image to Sparse image... done. system.img built successfully. Existing tbcfile(/home/anson/xavier_linux_for_tegra/bootloader/cboot_t194.bin) reused. copying tbcdtbfile(/home/anson/xavier_linux_for_tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb)... done. copying cfgfile(/home/anson/xavier_linux_for_tegra/bootloader/t186ref/cfg/flash_t194_sdmmc.xml) to flash.xml... done. Existing flasher(/home/anson/xavier_linux_for_tegra/bootloader/nvtboot_recovery_cpu_t194.bin) reused. Existing flashapp(/home/anson/xavier_linux_for_tegra/bootloader/tegraflash.py) reused. ./tegraflash.py --bl nvtboot_recovery_cpu_t194.bin --sdram_config tegra194-mb1-bct-memcfg-p2888.cfg,tegra194-memcfg-sw-override.cfg --odmdata 0x9190000 --applet mb1_t194_prod.bin --cmd "flash; reboot" --soft_fuses tegra194-mb1-soft-fuses-l4t.cfg --cfg flash.xml --chip 0x19 --uphy_config tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --minratchet_config tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg --device_config tegra19x-mb1-bct-device-sdmmc.cfg --misc_cold_boot_config tegra194-mb1-bct-misc-l4t.cfg --misc_config tegra194-mb1-bct-misc-flash.cfg --pinmux_config tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg --gpioint_config tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --pmic_config tegra194-mb1-bct-pmic-p2888-0001-a01-p2822-0000.cfg --pmc_config tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg --prod_config tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --scr_config tegra194-mb1-bct-scr-cbb-mini.cfg --scr_cold_boot_config tegra194-mb1-bct-scr-cbb-mini.cfg --br_cmd_config tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --dev_params tegra194-br-bct-sdmmc.cfg --bin "mb2_bootloader nvtboot_recovery_t194.bin; mts_preboot preboot_c10_prod_cr.bin; mts_mce mce_c10_prod_cr.bin; mts_proper mts_c10_prod_cr.bin; bpmp_fw bpmp_t194.bin; bpmp_fw_dtb tegra194-a02-bpmp-p2888-a01.dtb; spe_fw spe_t194.bin; tlk tos-trusty_t194.img; eks eks.img; bootloader_dtb tegra194-p2888-0001-p2822-0000.dtb" saving flash command in /home/anson/xavier_linux_for_tegra/bootloader/flashcmd.txt saving Windows flash command to /home/anson/xavier_linux_for_tegra/bootloader/flash_win.bat *** Flashing target device started. *** Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0072 ] tegrasign_v3.py --getmode mode.txt --key None [ 0.0073 ] Assuming zero filled SBK key [ 0.0022 ] Generating RCM messages [ 0.0045 ] tegrahost_v2 --chip 0x19 0 --magicid MB1B --appendsigheader mb1_t194_prod.bin zerosbk [ 0.0052 ] Header already present for mb1_t194_prod.bin [ 0.0083 ] [ 0.0177 ] tegrasign_v3.py --getmode mode.txt --key None [ 0.0178 ] Assuming zero filled SBK key [ 0.0228 ] tegrasign_v3.py --file mb1_t194_prod_sigheader.bin --key None --length 1136 --offset 2960 --pubkeyhash pub_key.key [ 0.0229 ] Assuming zero filled SBK key [ 0.0208 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_t194_prod_sigheader.bin mb1_t194_prod_sigheader.hash zerosbk [ 0.0235 ] [ 0.0281 ] tegrabct_v2 --chip 0x19 0 --sfuse tegra194-mb1-soft-fuses-l4t.cfg sfuse.bin [ 0.0291 ] [ 0.0308 ] tegrabct_v2 --chip 0x19 0 --ratchet_blob ratchet_blob.bin --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 0.0313 ] FwIndex: 1, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 2, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 3, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 4, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 5, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 6, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 7, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 11, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 12, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 13, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 14, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 15, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 16, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 17, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 18, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 19, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 30, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 31, MinRatchetLevel: 0 [ 0.0314 ] FwIndex: 32, MinRatchetLevel: 0 [ 0.0314 ] [ 0.0330 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x19 0 --sfuses sfuse.bin --download rcm mb1_t194_prod_sigheader.bin 0 0 [ 0.0335 ] RCM 0 is saved as rcm_0.rcm [ 0.0374 ] RCM 1 is saved as rcm_1.rcm [ 0.0375 ] RCM 2 is saved as rcm_2.rcm [ 0.0376 ] List of rcm files are saved in rcm_list.xml [ 0.0377 ] [ 0.0377 ] Signing RCM messages [ 0.0447 ] tegrasign_v3.py --getmontgomeryvalues montgomery.bin --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.0447 ] Assuming zero filled SBK key [ 0.0471 ] Copying signature to RCM mesages [ 0.0490 ] tegrarcm_v2 --chip 0x19 0 --updatesig rcm_list_signed.xml [ 0.0499 ] [ 0.0499 ] Parsing partition layout [ 0.0535 ] tegraparser_v2 --pt flash.xml.tmp [ 0.0564 ] [ 0.0565 ] Reading ramcode from backup chip_info.bin file [ 0.0567 ] RAMCODE Read from Device: 1 [ 0.0567 ] Disable BPMP dtb trim, using default dtb [ 0.0568 ] [ 0.0568 ] Creating list of images to be signed [ 0.0585 ] tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --ratchet_blob ratchet_blob.bin --list images_list.xml zerosbk [ 0.0590 ] MB1: Nvheader already present is mb1_t194_prod.bin [ 0.0594 ] Header already present for mb1_t194_prod_sigheader.bin [ 0.0597 ] MB1: Nvheader already present is mb1_t194_prod.bin [ 0.0617 ] Header already present for mb1_t194_prod_sigheader.bin [ 0.0623 ] adding BCH for spe_t194.bin [ 0.0682 ] adding BCH for spe_t194.bin [ 0.0696 ] adding BCH for nvtboot_t194.bin [ 0.0720 ] adding BCH for nvtboot_t194.bin [ 0.0748 ] Header already present for preboot_c10_prod_cr.bin [ 0.0808 ] Header already present for preboot_c10_prod_cr.bin [ 0.0810 ] Header already present for mce_c10_prod_cr.bin [ 0.0820 ] Header already present for mce_c10_prod_cr.bin [ 0.0831 ] adding BCH for mts_c10_prod_cr.bin [ 0.0944 ] adding BCH for mts_c10_prod_cr.bin [ 0.1489 ] adding BCH for cboot_t194.bin [ 0.2037 ] adding BCH for cboot_t194.bin [ 0.2110 ] adding BCH for tegra194-p2888-0001-p2822-0000.dtb [ 0.2185 ] adding BCH for tegra194-p2888-0001-p2822-0000.dtb [ 0.2230 ] adding BCH for tos-trusty_t194.img [ 0.2326 ] adding BCH for tos-trusty_t194.img [ 0.2389 ] adding BCH for eks.img [ 0.2476 ] adding BCH for eks.img [ 0.2477 ] adding BCH for bpmp_t194.bin [ 0.2506 ] adding BCH for bpmp_t194.bin [ 0.2642 ] adding BCH for tegra194-a02-bpmp-p2888-a01.dtb [ 0.2949 ] adding BCH for tegra194-a02-bpmp-p2888-a01.dtb [ 0.3092 ] adding BCH for xusb_sil_rel_fw [ 0.3321 ] adding BCH for xusb_sil_rel_fw [ 0.3341 ] adding BCH for camera-rtcpu-rce.img [ 0.3399 ] adding BCH for camera-rtcpu-rce.img [ 0.3440 ] adding BCH for adsp-fw.bin [ 0.3510 ] adding BCH for adsp-fw.bin [ 0.3522 ] Header already present for warmboot_t194_prod.bin [ 0.3541 ] Header already present for warmboot_t194_prod.bin [ 0.3546 ] adding BCH for recovery.img [ 0.4842 ] adding BCH for tegra194-p2888-0001-p2822-0000.dtb.rec [ 1.3675 ] adding BCH for boot.img [ 1.3904 ] adding BCH for boot.img [ 2.0567 ] adding BCH for kernel_tegra194-p2888-0001-p2822-0000.dtb [ 2.7123 ] adding BCH for kernel_tegra194-p2888-0001-p2822-0000.dtb [ 2.7212 ] [ 2.7212 ] Filling MB1 storage info [ 2.7212 ] Generating br-bct [ 2.7231 ] Performing cfg overlay [ 2.7231 ] ['tegra194-mb1-bct-memcfg-p2888.cfg', 'tegra194-memcfg-sw-override.cfg'] [ 2.7234 ] sw_memcfg_overlay.pl -c tegra194-mb1-bct-memcfg-p2888.cfg -s tegra194-memcfg-sw-override.cfg -o /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg [ 3.0078 ] [ 3.0079 ] Updating dev and MSS params in BR BCT [ 3.0079 ] tegrabct_v2 --dev_param tegra194-br-bct-sdmmc.cfg --sdram /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg --brbct br_bct.cfg --sfuse tegra194-mb1-soft-fuses-l4t.cfg --chip 0x19 0 [ 3.0561 ] [ 3.0561 ] Updating bl info [ 3.0580 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updateblinfo flash.xml.bin [ 3.0597 ] [ 3.0597 ] Generating signatures [ 3.0667 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key [ 3.0667 ] Assuming zero filled SBK key [ 3.3676 ] Generating br-bct [ 3.3694 ] Performing cfg overlay [ 3.3695 ] ['/home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg'] [ 3.3695 ] Updating dev and MSS params in BR BCT [ 3.3695 ] tegrabct_v2 --dev_param tegra194-br-bct-sdmmc.cfg --sdram /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg --brbct br_bct.cfg --sfuse tegra194-mb1-soft-fuses-l4t.cfg --chip 0x19 0 [ 3.6205 ] [ 3.6206 ] Updating bl info [ 3.6226 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml [ 3.6255 ] [ 3.6256 ] Updating smd info [ 3.6275 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 --updatesmdinfo flash.xml.bin [ 3.6283 ] [ 3.6283 ] Updating Odmdata [ 3.6300 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updatefields Odmdata =0x9190000 [ 3.6309 ] [ 3.6309 ] Get Signed section of bct [ 3.6326 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --listbct bct_list.xml [ 3.6333 ] [ 3.6351 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --getmontgomeryvalues montgomery.bin [ 3.6356 ] Assuming zero filled SBK key [ 3.6842 ] [ 3.6842 ] Updating BCT with signature [ 3.6862 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updatesig bct_list_signed.xml [ 3.6870 ] [ 3.6870 ] Generating coldboot mb1-bct [ 3.6893 ] tegrabct_v2 --chip 0x19 0 --mb1bct mb1_cold_boot_bct.cfg --sdram /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg --misc tegra194-mb1-bct-misc-l4t.cfg --scr tegra194-mb1-bct-scr-cbb-mini.cfg --pinmux tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg --pmc tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg --pmic tegra194-mb1-bct-pmic-p2888-0001-a01-p2822-0000.cfg --brcommand tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --prod tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --gpioint tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --uphy tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device tegra19x-mb1-bct-device-sdmmc.cfg [ 3.6899 ] MB1-BCT version: 0x1 [ 3.6901 ] Parsing config file :tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg [ 3.6905 ] Added Platform Config 0 data with size :- 3008 [ 3.6919 ] Parsing config file :tegra194-mb1-bct-scr-cbb-mini.cfg [ 3.6921 ] File read failed [ 3.6962 ] File read failed [ 3.7040 ] Added Platform Config 1 data with size :- 19640 [ 3.7042 ] Parsing config file :tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg [ 3.7045 ] Added Platform Config 2 data with size :- 24 [ 3.7047 ] Parsing config file :tegra194-mb1-bct-pmic-p2888-0001-a01-p2822-0000.cfg [ 3.7049 ] File read failed [ 3.7050 ] File read failed [ 3.7051 ] Added Platform Config 4 data with size :- 380 [ 3.7052 ] Parsing config file :tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg [ 3.7055 ] Added Platform Config 3 data with size :- 92 [ 3.7056 ] Parsing config file :tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg [ 3.7059 ] Added Platform Config 5 data with size :- 68 [ 3.7063 ] Parsing config file :tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg [ 3.7065 ] Added Platform Config 7 data with size :- 392 [ 3.7073 ] Parsing config file :tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg [ 3.7076 ] Added Platform Config 8 data with size :- 12 [ 3.7079 ] Parsing config file :tegra19x-mb1-bct-device-sdmmc.cfg [ 3.7081 ] Added Platform Config 9 data with size :- 32 [ 3.7081 ] [ 3.7081 ] Updating mb1-bct with firmware information [ 3.7101 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin [ 3.7106 ] MB1-BCT version: 0x1 [ 3.7110 ] [ 3.7110 ] Updating mb1-bct with storage information [ 3.7127 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --updatestorageinfo flash.xml.bin [ 3.7133 ] MB1-BCT version: 0x1 [ 3.7136 ] [ 3.7137 ] Updating mb1-bct with ratchet information [ 3.7154 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 3.7160 ] MB1-BCT version: 0x1 [ 3.7161 ] FwIndex: 1, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 2, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 3, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 4, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 5, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 6, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 7, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 11, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 12, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 13, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 14, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 15, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 16, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 17, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 18, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 19, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 30, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 31, MinRatchetLevel: 0 [ 3.7163 ] FwIndex: 32, MinRatchetLevel: 0 [ 3.7163 ] [ 3.7181 ] tegrahost_v2 --chip 0x19 --align mb1_cold_boot_bct_MB1.bct [ 3.7187 ] [ 3.7205 ] tegrahost_v2 --chip 0x19 0 --magicid MBCT --ratchet_blob ratchet_blob.bin --appendsigheader mb1_cold_boot_bct_MB1.bct zerosbk [ 3.7210 ] adding BCH for mb1_cold_boot_bct_MB1.bct [ 3.7216 ] [ 3.7288 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_sigheader.bct_list.xml --pubkeyhash pub_key.key [ 3.7288 ] Assuming zero filled SBK key [ 3.7274 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_cold_boot_bct_MB1_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_sigheader.bct.hash zerosbk [ 3.7283 ] [ 3.7283 ] Generating recovery mb1-bct [ 3.7302 ] tegrabct_v2 --chip 0x19 0 --mb1bct mb1_bct.cfg --sdram /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg --misc tegra194-mb1-bct-misc-flash.cfg --scr tegra194-mb1-bct-scr-cbb-mini.cfg --pinmux tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg --pmc tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg --pmic tegra194-mb1-bct-pmic-p2888-0001-a01-p2822-0000.cfg --brcommand tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --prod tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --gpioint tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --uphy tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device tegra19x-mb1-bct-device-sdmmc.cfg [ 3.7308 ] MB1-BCT version: 0x1 [ 3.7310 ] Parsing config file :tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg [ 3.7313 ] Added Platform Config 0 data with size :- 3008 [ 3.7325 ] Parsing config file :tegra194-mb1-bct-scr-cbb-mini.cfg [ 3.7327 ] File read failed [ 3.7365 ] File read failed [ 3.7443 ] Added Platform Config 1 data with size :- 19640 [ 3.7445 ] Parsing config file :tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg [ 3.7447 ] Added Platform Config 2 data with size :- 24 [ 3.7449 ] Parsing config file :tegra194-mb1-bct-pmic-p2888-0001-a01-p2822-0000.cfg [ 3.7451 ] File read failed [ 3.7452 ] File read failed [ 3.7453 ] Added Platform Config 4 data with size :- 380 [ 3.7454 ] Parsing config file :tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg [ 3.7456 ] Added Platform Config 3 data with size :- 92 [ 3.7456 ] [ 3.7456 ] Parsing config file :tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg [ 3.7456 ] Added Platform Config 5 data with size :- 68 [ 3.7456 ] [ 3.7456 ] Parsing config file :tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg [ 3.7456 ] Added Platform Config 7 data with size :- 392 [ 3.7456 ] [ 3.7456 ] Parsing config file :tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg [ 3.7456 ] Added Platform Config 8 data with size :- 12 [ 3.7456 ] [ 3.7456 ] Parsing config file :tegra19x-mb1-bct-device-sdmmc.cfg [ 3.7456 ] Added Platform Config 9 data with size :- 32 [ 3.7457 ] [ 3.7457 ] Updating mb1-bct with firmware information [ 3.7476 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --updatefwinfo flash.xml.bin [ 3.7482 ] MB1-BCT version: 0x1 [ 3.7485 ] [ 3.7485 ] Updating mb1-bct with storage information [ 3.7503 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --updatestorageinfo flash.xml.bin [ 3.7509 ] MB1-BCT version: 0x1 [ 3.7512 ] [ 3.7512 ] Updating mb1-bct with ratchet information [ 3.7529 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --minratchet tegra194-mb1-bct-ratchet-p2888-0000-p2822-0000.cfg [ 3.7535 ] MB1-BCT version: 0x1 [ 3.7537 ] FwIndex: 1, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 2, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 3, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 4, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 5, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 6, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 7, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 11, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 12, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 13, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 14, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 15, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 16, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 17, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 18, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 19, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 30, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 31, MinRatchetLevel: 0 [ 3.7538 ] FwIndex: 32, MinRatchetLevel: 0 [ 3.7538 ] [ 3.7556 ] tegrahost_v2 --chip 0x19 --align mb1_bct_MB1.bct [ 3.7562 ] [ 3.7580 ] tegrahost_v2 --chip 0x19 0 --magicid MBCT --ratchet_blob ratchet_blob.bin --appendsigheader mb1_bct_MB1.bct zerosbk [ 3.7586 ] adding BCH for mb1_bct_MB1.bct [ 3.7591 ] [ 3.7663 ] tegrasign_v3.py --key None --list mb1_bct_MB1_sigheader.bct_list.xml --pubkeyhash pub_key.key [ 3.7663 ] Assuming zero filled SBK key [ 3.7648 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_bct_MB1_sigheader.bct.encrypt mb1_bct_MB1_sigheader.bct.hash zerosbk [ 3.7657 ] [ 3.7657 ] Generating coldboot mem-bct [ 3.7675 ] tegrabct_v2 --chip 0x19 0 --sdram /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg --membct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_1.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_2.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_3.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_4.bct [ 3.7680 ] Packing sdram param for instance[0] [ 3.8148 ] Packing sdram param for instance[1] [ 3.8149 ] Packing sdram param for instance[2] [ 3.8150 ] Packing sdram param for instance[3] [ 3.8150 ] Packing sdram param for instance[4] [ 3.8150 ] Packing sdram param for instance[5] [ 3.8150 ] Packing sdram param for instance[6] [ 3.8150 ] Packing sdram param for instance[7] [ 3.8150 ] Packing sdram param for instance[8] [ 3.8150 ] Packing sdram param for instance[9] [ 3.8150 ] Packing sdram param for instance[10] [ 3.8150 ] Packing sdram param for instance[11] [ 3.8150 ] Packing sdram param for instance[12] [ 3.8150 ] Packing sdram param for instance[13] [ 3.8150 ] Packing sdram param for instance[14] [ 3.8150 ] Packing sdram param for instance[15] [ 3.8150 ] [ 3.8150 ] Getting sector size from pt [ 3.8170 ] tegraparser_v2 --getsectorsize flash.xml.bin sector_info.bin [ 3.8177 ] [ 3.8177 ] BlockSize read from layout is 200 [ 3.8195 ] tegrahost_v2 --chip 0x19 0 --blocksize 512 --magicid MEMB --addsigheader_multi /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_1.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_2.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_3.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_4.bct [ 3.8201 ] adding BCH for /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_1.bct [ 3.8219 ] [ 3.8238 ] tegrahost_v2 --chip 0x19 --align mem_coldboot.bct [ 3.8244 ] [ 3.8263 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --ratchet_blob ratchet_blob.bin --appendsigheader mem_coldboot.bct zerosbk [ 3.8269 ] Header already present for mem_coldboot.bct [ 3.8271 ] [ 3.8342 ] tegrasign_v3.py --key None --list mem_coldboot_sigheader.bct_list.xml --pubkeyhash pub_key.key [ 3.8343 ] Assuming zero filled SBK key [ 3.8331 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_coldboot_sigheader.bct.encrypt mem_coldboot_sigheader.bct.hash zerosbk [ 3.8340 ] [ 3.8340 ] Generating recovery mem-bct [ 3.8358 ] tegrabct_v2 --chip 0x19 0 --sdram /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071.cfg --membct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_1.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_2.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_3.bct /home/anson/xavier_linux_for_tegra/bootloader/24980/tmp063z8v071_4.bct [ 3.8364 ] Packing sdram param for instance[0] [ 3.8832 ] Packing sdram param for instance[1] [ 3.8833 ] Packing sdram param for instance[2] [ 3.8835 ] Packing sdram param for instance[3] [ 3.8835 ] Packing sdram param for instance[4] [ 3.8835 ] Packing sdram param for instance[5] [ 3.8835 ] Packing sdram param for instance[6] [ 3.8835 ] Packing sdram param for instance[7] [ 3.8835 ] Packing sdram param for instance[8] [ 3.8835 ] Packing sdram param for instance[9] [ 3.8835 ] Packing sdram param for instance[10] [ 3.8835 ] Packing sdram param for instance[11] [ 3.8835 ] Packing sdram param for instance[12] [ 3.8835 ] Packing sdram param for instance[13] [ 3.8835 ] Packing sdram param for instance[14] [ 3.8835 ] Packing sdram param for instance[15] [ 3.8835 ] [ 3.8856 ] tegrahost_v2 --chip 0x19 --align mem_rcm.bct [ 3.8862 ] [ 3.8880 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --ratchet_blob ratchet_blob.bin --appendsigheader mem_rcm.bct zerosbk [ 3.8886 ] adding BCH for mem_rcm.bct [ 3.8895 ] [ 3.8966 ] tegrasign_v3.py --key None --list mem_rcm_sigheader.bct_list.xml --pubkeyhash pub_key.key [ 3.8967 ] Assuming zero filled SBK key [ 3.8952 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_rcm_sigheader.bct.encrypt mem_rcm_sigheader.bct.hash zerosbk [ 3.8963 ] [ 3.8964 ] Copying signatures [ 3.8982 ] tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml [ 5.5550 ] [ 5.5550 ] Boot Rom communication [ 5.5570 ] tegrarcm_v2 --chip 0x19 0 --rcm rcm_list_signed.xml [ 5.5576 ] BR_CID: 0x88021911640560830800000012010040 [ 5.5582 ] RCM version 0X190001 [ 5.5586 ] Boot Rom communication completed [ 6.5743 ] [ 7.5789 ] tegrarcm_v2 --isapplet [ 7.5806 ] Applet version 01.00.0000 [ 7.5829 ] [ 7.5829 ] Sending BCTs [ 7.5857 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt --download bct_mem mem_rcm_sigheader.bct.encrypt [ 7.5868 ] Applet version 01.00.0000 [ 7.5888 ] Sending bct_bootrom [ 7.5889 ] [................................................] 100% [ 7.5902 ] Sending bct_mb1 [ 7.5949 ] [................................................] 100% [ 7.5985 ] Sending bct_mem [ 7.6556 ] [................................................] 100% [ 7.7376 ] [ 7.7376 ] Generating blob [ 7.7398 ] tegrahost_v2 --chip 0x19 --align blob_nvtboot_recovery_cpu_t194.bin [ 7.7404 ] [ 7.7422 ] tegrahost_v2 --chip 0x19 0 --magicid CPBL --ratchet_blob ratchet_blob.bin --appendsigheader blob_nvtboot_recovery_cpu_t194.bin zerosbk [ 7.7429 ] adding BCH for blob_nvtboot_recovery_cpu_t194.bin [ 7.7471 ] [ 7.7544 ] tegrasign_v3.py --key None --list blob_nvtboot_recovery_cpu_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.7545 ] Assuming zero filled SBK key [ 7.7532 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_nvtboot_recovery_cpu_t194_sigheader.bin.encrypt blob_nvtboot_recovery_cpu_t194_sigheader.bin.hash zerosbk [ 7.7560 ] [ 7.7579 ] tegrahost_v2 --chip 0x19 --align blob_nvtboot_recovery_t194.bin [ 7.7585 ] [ 7.7604 ] tegrahost_v2 --chip 0x19 0 --magicid MB2B --ratchet_blob ratchet_blob.bin --appendsigheader blob_nvtboot_recovery_t194.bin zerosbk [ 7.7610 ] adding BCH for blob_nvtboot_recovery_t194.bin [ 7.7644 ] [ 7.7716 ] tegrasign_v3.py --key None --list blob_nvtboot_recovery_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.7717 ] Assuming zero filled SBK key [ 7.7703 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_nvtboot_recovery_t194_sigheader.bin.encrypt blob_nvtboot_recovery_t194_sigheader.bin.hash zerosbk [ 7.7725 ] [ 7.7744 ] tegrahost_v2 --chip 0x19 --align blob_preboot_c10_prod_cr.bin [ 7.7750 ] [ 7.7768 ] tegrahost_v2 --chip 0x19 0 --magicid MTSP --appendsigheader blob_preboot_c10_prod_cr.bin zerosbk [ 7.7774 ] Header already present for blob_preboot_c10_prod_cr.bin [ 7.7776 ] [ 7.7848 ] tegrasign_v3.py --key None --list blob_preboot_c10_prod_cr_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.7849 ] Assuming zero filled SBK key [ 7.7833 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_preboot_c10_prod_cr_sigheader.bin.encrypt blob_preboot_c10_prod_cr_sigheader.bin.hash zerosbk [ 7.7841 ] [ 7.7861 ] tegrahost_v2 --chip 0x19 --align blob_mce_c10_prod_cr.bin [ 7.7866 ] [ 7.7884 ] tegrahost_v2 --chip 0x19 0 --magicid MTSM --appendsigheader blob_mce_c10_prod_cr.bin zerosbk [ 7.7889 ] Header already present for blob_mce_c10_prod_cr.bin [ 7.7902 ] [ 7.7973 ] tegrasign_v3.py --key None --list blob_mce_c10_prod_cr_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.7973 ] Assuming zero filled SBK key [ 7.7958 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_mce_c10_prod_cr_sigheader.bin.encrypt blob_mce_c10_prod_cr_sigheader.bin.hash zerosbk [ 7.7977 ] [ 7.7996 ] tegrahost_v2 --chip 0x19 --align blob_mts_c10_prod_cr.bin [ 7.8001 ] [ 7.8019 ] tegrahost_v2 --chip 0x19 0 --magicid MTSB --appendsigheader blob_mts_c10_prod_cr.bin zerosbk [ 7.8025 ] adding BCH for blob_mts_c10_prod_cr.bin [ 7.8572 ] [ 7.8646 ] tegrasign_v3.py --key None --list blob_mts_c10_prod_cr_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.8647 ] Assuming zero filled SBK key [ 7.8678 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_mts_c10_prod_cr_sigheader.bin.encrypt blob_mts_c10_prod_cr_sigheader.bin.hash zerosbk [ 7.8971 ] [ 7.8990 ] tegrahost_v2 --chip 0x19 --align blob_bpmp_t194.bin [ 7.8996 ] [ 7.9014 ] tegrahost_v2 --chip 0x19 0 --magicid BPMF --ratchet_blob ratchet_blob.bin --appendsigheader blob_bpmp_t194.bin zerosbk [ 7.9019 ] adding BCH for blob_bpmp_t194.bin [ 7.9156 ] [ 7.9228 ] tegrasign_v3.py --key None --list blob_bpmp_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.9229 ] Assuming zero filled SBK key [ 7.9224 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_bpmp_t194_sigheader.bin.encrypt blob_bpmp_t194_sigheader.bin.hash zerosbk [ 7.9303 ] [ 7.9324 ] tegrahost_v2 --chip 0x19 --align blob_tegra194-a02-bpmp-p2888-a01.dtb [ 7.9331 ] [ 7.9349 ] tegrahost_v2 --chip 0x19 0 --magicid BPMD --ratchet_blob ratchet_blob.bin --appendsigheader blob_tegra194-a02-bpmp-p2888-a01.dtb zerosbk [ 7.9355 ] adding BCH for blob_tegra194-a02-bpmp-p2888-a01.dtb [ 7.9513 ] [ 7.9589 ] tegrasign_v3.py --key None --list blob_tegra194-a02-bpmp-p2888-a01_sigheader.dtb_list.xml --pubkeyhash pub_key.key [ 7.9590 ] Assuming zero filled SBK key [ 7.9587 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_tegra194-a02-bpmp-p2888-a01_sigheader.dtb.encrypt blob_tegra194-a02-bpmp-p2888-a01_sigheader.dtb.hash zerosbk [ 7.9677 ] [ 7.9697 ] tegrahost_v2 --chip 0x19 --align blob_spe_t194.bin [ 7.9703 ] [ 7.9721 ] tegrahost_v2 --chip 0x19 0 --magicid SPEF --ratchet_blob ratchet_blob.bin --appendsigheader blob_spe_t194.bin zerosbk [ 7.9727 ] adding BCH for blob_spe_t194.bin [ 7.9743 ] [ 7.9814 ] tegrasign_v3.py --key None --list blob_spe_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key [ 7.9815 ] Assuming zero filled SBK key [ 7.9799 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_spe_t194_sigheader.bin.encrypt blob_spe_t194_sigheader.bin.hash zerosbk [ 7.9813 ] [ 7.9832 ] tegrahost_v2 --chip 0x19 --align blob_tos-trusty_t194.img [ 7.9838 ] [ 7.9855 ] tegrahost_v2 --chip 0x19 0 --magicid TOSB --ratchet_blob ratchet_blob.bin --appendsigheader blob_tos-trusty_t194.img zerosbk [ 7.9861 ] adding BCH for blob_tos-trusty_t194.img [ 7.9927 ] [ 8.0000 ] tegrasign_v3.py --key None --list blob_tos-trusty_t194_sigheader.img_list.xml --pubkeyhash pub_key.key [ 8.0001 ] Assuming zero filled SBK key [ 7.9990 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_tos-trusty_t194_sigheader.img.encrypt blob_tos-trusty_t194_sigheader.img.hash zerosbk [ 8.0031 ] [ 8.0050 ] tegrahost_v2 --chip 0x19 --align blob_eks.img [ 8.0056 ] [ 8.0074 ] tegrahost_v2 --chip 0x19 0 --magicid EKSB --ratchet_blob ratchet_blob.bin --appendsigheader blob_eks.img zerosbk [ 8.0079 ] adding BCH for blob_eks.img [ 8.0080 ] [ 8.0152 ] tegrasign_v3.py --key None --list blob_eks_sigheader.img_list.xml --pubkeyhash pub_key.key [ 8.0152 ] Assuming zero filled SBK key [ 8.0136 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_eks_sigheader.img.encrypt blob_eks_sigheader.img.hash zerosbk [ 8.0144 ] [ 8.0162 ] tegrahost_v2 --chip 0x19 --align blob_tegra194-p2888-0001-p2822-0000.dtb [ 8.0168 ] [ 8.0186 ] tegrahost_v2 --chip 0x19 0 --magicid CDTB --ratchet_blob ratchet_blob.bin --appendsigheader blob_tegra194-p2888-0001-p2822-0000.dtb zerosbk [ 8.0192 ] adding BCH for blob_tegra194-p2888-0001-p2822-0000.dtb [ 8.0239 ] [ 8.0313 ] tegrasign_v3.py --key None --list blob_tegra194-p2888-0001-p2822-0000_sigheader.dtb_list.xml --pubkeyhash pub_key.key [ 8.0314 ] Assuming zero filled SBK key [ 8.0302 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt blob_tegra194-p2888-0001-p2822-0000_sigheader.dtb.hash zerosbk [ 8.0334 ] [ 8.0353 ] tegrahost_v2 --chip 0x19 --generateblob blob.xml blob.bin [ 8.0359 ] number of images in blob are 11 [ 8.0361 ] blobsize is 6691128 [ 8.0362 ] Added binary blob_nvtboot_recovery_cpu_t194_sigheader.bin.encrypt of size 263840 [ 8.0384 ] Added binary blob_nvtboot_recovery_t194_sigheader.bin.encrypt of size 181152 [ 8.0387 ] Added binary blob_preboot_c10_prod_cr_sigheader.bin.encrypt of size 24016 [ 8.0389 ] Added binary blob_mce_c10_prod_cr_sigheader.bin.encrypt of size 143200 [ 8.0392 ] Added binary blob_mts_c10_prod_cr_sigheader.bin.encrypt of size 3430416 [ 8.0400 ] Added binary blob_bpmp_t194_sigheader.bin.encrypt of size 856352 [ 8.0407 ] Added binary blob_tegra194-a02-bpmp-p2888-a01_sigheader.dtb.encrypt of size 992960 [ 8.0412 ] Added binary blob_spe_t194_sigheader.bin.encrypt of size 94960 [ 8.0414 ] Added binary blob_tos-trusty_t194_sigheader.img.encrypt of size 410560 [ 8.0417 ] Added binary blob_eks_sigheader.img.encrypt of size 5136 [ 8.0419 ] Added binary blob_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt of size 288352 [ 8.0440 ] [ 8.0440 ] Sending bootloader and pre-requisite binaries [ 8.0460 ] tegrarcm_v2 --download blob blob.bin [ 8.0466 ] Applet version 01.00.0000 [ 8.0488 ] Sending blob [ 8.0489 ] [....... ] 015% [ 8.0489 ] [............... ] 031% [ 8.0489 ] [....................... ] 047% [ 8.0489 ] [............................... ] 062% [ 8.0489 ] [....................................... ] 078% [ 8.0489 ] [............................................... ] 094% [ 8.0489 ] [................................................] 100% [ 9.0065 ] [ 9.0085 ] tegrarcm_v2 --boot recovery [ 9.0091 ] Applet version 01.00.0000 [ 9.0153 ] [ 10.0185 ] tegrarcm_v2 --isapplet [ 169.7204 ] [ 169.7225 ] tegrarcm_v2 --ismb2 [ 169.7233 ] [ 169.7269 ] tegradevflash_v2 --iscpubl [ 169.7275 ] CPU Bootloader is not running on device. [ 169.7298 ] [ 170.7328 ] tegrarcm_v2 --isapplet [ 170.7336 ] USB communication failed.Check if device is in recovery [ 170.7338 ] [ 170.7357 ] tegrarcm_v2 --ismb2 [ 170.7363 ] USB communication failed.Check if device is in recovery [ 170.7365 ] [ 170.7382 ] tegradevflash_v2 --iscpubl [ 170.7388 ] Cannot Open USB [ 170.7389 ] [ 171.7445 ] tegrarcm_v2 --isapplet [ 171.7470 ] USB communication failed.Check if device is in recovery [ 171.7475 ] [ 171.7516 ] tegrarcm_v2 --ismb2 [ 171.7535 ] USB communication failed.Check if device is in recovery [ 171.7540 ] [ 171.7572 ] tegradevflash_v2 --iscpubl [ 171.7585 ] Cannot Open USB [ 171.7588 ] [ 172.7626 ] tegrarcm_v2 --isapplet [ 172.7637 ] USB communication failed.Check if device is in recovery [ 172.7640 ] [ 172.7664 ] tegrarcm_v2 --ismb2 [ 172.7675 ] USB communication failed.Check if device is in recovery [ 172.7677 ] [ 172.7701 ] tegradevflash_v2 --iscpubl [ 172.7712 ] Cannot Open USB [ 172.7715 ] [ 173.7758 ] tegrarcm_v2 --isapplet [ 173.7774 ] USB communication failed.Check if device is in recovery [ 173.7777 ] [ 173.7807 ] tegrarcm_v2 --ismb2 [ 173.7822 ] USB communication failed.Check if device is in recovery [ 173.7825 ] [ 173.7854 ] tegradevflash_v2 --iscpubl [ 173.7869 ] Cannot Open USB [ 173.7873 ] [ 174.7914 ] tegrarcm_v2 --isapplet [ 174.7927 ] USB communication failed.Check if device is in recovery [ 174.7930 ] [ 174.7956 ] tegrarcm_v2 --ismb2 [ 174.7968 ] USB communication failed.Check if device is in recovery [ 174.7971 ] [ 174.7997 ] tegradevflash_v2 --iscpubl [ 174.8009 ] Cannot Open USB [ 174.8012 ] [ 175.8037 ] tegrarcm_v2 --isapplet [ 175.8043 ] USB communication failed.Check if device is in recovery [ 175.8044 ] [ 175.8063 ] tegrarcm_v2 --ismb2 [ 175.8069 ] USB communication failed.Check if device is in recovery [ 175.8070 ] [ 175.8088 ] tegradevflash_v2 --iscpubl [ 175.8093 ] Cannot Open USB [ 175.8094 ] [ 176.8126 ] tegrarcm_v2 --isapplet [ 176.8132 ] USB communication failed.Check if device is in recovery [ 176.8134 ] [ 176.8152 ] tegrarcm_v2 --ismb2 [ 176.8158 ] USB communication failed.Check if device is in recovery [ 176.8159 ] [ 176.8178 ] tegradevflash_v2 --iscpubl [ 176.8184 ] Cannot Open USB [ 176.8186 ] [ 177.8217 ] tegrarcm_v2 --isapplet [ 177.8223 ] USB communication failed.Check if device is in recovery [ 177.8225 ] [ 177.8243 ] tegrarcm_v2 --ismb2 [ 177.8249 ] USB communication failed.Check if device is in recovery [ 177.8251 ] [ 177.8269 ] tegradevflash_v2 --iscpubl [ 177.8274 ] Cannot Open USB [ 177.8276 ] [ 178.8311 ] tegrarcm_v2 --isapplet [ 178.8320 ] USB communication failed.Check if device is in recovery [ 178.8322 ] [ 178.8343 ] tegrarcm_v2 --ismb2 [ 178.8352 ] USB communication failed.Check if device is in recovery [ 178.8354 ] [ 178.8376 ] tegradevflash_v2 --iscpubl [ 178.8385 ] Cannot Open USB [ 178.8387 ] [ 179.8418 ] tegrarcm_v2 --isapplet [ 179.8424 ] USB communication failed.Check if device is in recovery [ 179.8425 ] [ 179.8443 ] tegrarcm_v2 --ismb2 [ 179.8449 ] USB communication failed.Check if device is in recovery [ 179.8450 ] [ 179.8467 ] tegradevflash_v2 --iscpubl [ 179.8473 ] Cannot Open USB [ 179.8473 ] [ 180.8505 ] tegrarcm_v2 --isapplet [ 180.8513 ] USB communication failed.Check if device is in recovery [ 180.8516 ] [ 180.8537 ] tegrarcm_v2 --ismb2 [ 180.8546 ] USB communication failed.Check if device is in recovery [ 180.8547 ] [ 180.8568 ] tegradevflash_v2 --iscpubl [ 180.8577 ] Cannot Open USB [ 180.8579 ] [ 181.8633 ] tegrarcm_v2 --isapplet [ 181.8658 ] USB communication failed.Check if device is in recovery [ 181.8663 ] [ 181.8704 ] tegrarcm_v2 --ismb2 [ 181.8728 ] USB communication failed.Check if device is in recovery [ 181.8733 ] [ 181.8774 ] tegradevflash_v2 --iscpubl [ 181.8799 ] Cannot Open USB [ 181.8804 ] [ 182.8849 ] tegrarcm_v2 --isapplet [ 182.8864 ] USB communication failed.Check if device is in recovery [ 182.8867 ] [ 182.8897 ] tegrarcm_v2 --ismb2 [ 182.8912 ] USB communication failed.Check if device is in recovery [ 182.8915 ] [ 182.8945 ] tegradevflash_v2 --iscpubl [ 182.8960 ] Cannot Open USB [ 182.8963 ] [ 183.9002 ] tegrarcm_v2 --isapplet [ 183.9014 ] USB communication failed.Check if device is in recovery [ 183.9017 ] [ 183.9042 ] tegrarcm_v2 --ismb2 [ 183.9053 ] USB communication failed.Check if device is in recovery [ 183.9056 ] [ 183.9080 ] tegradevflash_v2 --iscpubl [ 183.9092 ] Cannot Open USB [ 183.9094 ] [ 184.9140 ] tegrarcm_v2 --isapplet [ 184.9165 ] USB communication failed.Check if device is in recovery [ 184.9171 ] [ 184.9211 ] tegrarcm_v2 --ismb2 [ 184.9235 ] USB communication failed.Check if device is in recovery [ 184.9241 ] [ 184.9282 ] tegradevflash_v2 --iscpubl [ 184.9306 ] Cannot Open USB [ 184.9311 ] [ 185.9346 ] tegrarcm_v2 --isapplet [ 185.9354 ] USB communication failed.Check if device is in recovery [ 185.9356 ] [ 185.9376 ] tegrarcm_v2 --ismb2 [ 185.9383 ] USB communication failed.Check if device is in recovery [ 185.9384 ] [ 185.9404 ] tegradevflash_v2 --iscpubl [ 185.9412 ] Cannot Open USB [ 185.9414 ] [ 186.9446 ] tegrarcm_v2 --isapplet [ 186.9452 ] USB communication failed.Check if device is in recovery [ 186.9454 ] [ 186.9472 ] tegrarcm_v2 --ismb2 [ 186.9478 ] USB communication failed.Check if device is in recovery [ 186.9479 ] [ 186.9497 ] tegradevflash_v2 --iscpubl [ 186.9502 ] Cannot Open USB [ 186.9503 ] [ 187.9536 ] tegrarcm_v2 --isapplet [ 187.9542 ] USB communication failed.Check if device is in recovery [ 187.9544 ] [ 187.9563 ] tegrarcm_v2 --ismb2 [ 187.9570 ] USB communication failed.Check if device is in recovery [ 187.9571 ] [ 187.9589 ] tegradevflash_v2 --iscpubl [ 187.9597 ] Cannot Open USB [ 187.9598 ] [ 188.9643 ] tegrarcm_v2 --isapplet [ 188.9665 ] USB communication failed.Check if device is in recovery [ 188.9670 ] [ 188.9708 ] tegrarcm_v2 --ismb2 [ 188.9730 ] USB communication failed.Check if device is in recovery [ 188.9735 ] [ 188.9773 ] tegradevflash_v2 --iscpubl [ 188.9789 ] Cannot Open USB [ 188.9793 ] [ 189.9823 ] tegrarcm_v2 --isapplet [ 189.9835 ] USB communication failed.Check if device is in recovery [ 189.9838 ] [ 189.9864 ] tegrarcm_v2 --ismb2 [ 189.9879 ] USB communication failed.Check if device is in recovery [ 189.9882 ] [ 189.9911 ] tegradevflash_v2 --iscpubl [ 189.9927 ] Cannot Open USB [ 189.9931 ] [ 190.9968 ] tegrarcm_v2 --isapplet [ 190.9977 ] USB communication failed.Check if device is in recovery [ 190.9979 ] [ 191.0000 ] tegrarcm_v2 --ismb2 [ 191.0010 ] USB communication failed.Check if device is in recovery [ 191.0013 ] [ 191.0035 ] tegradevflash_v2 --iscpubl [ 191.0044 ] Cannot Open USB [ 191.0046 ] [ 192.0101 ] tegrarcm_v2 --isapplet [ 192.0126 ] USB communication failed.Check if device is in recovery [ 192.0132 ] [ 192.0173 ] tegrarcm_v2 --ismb2 [ 192.0190 ] USB communication failed.Check if device is in recovery [ 192.0194 ] [ 192.0226 ] tegradevflash_v2 --iscpubl [ 192.0244 ] Cannot Open USB [ 192.0248 ] [ 193.0288 ] tegrarcm_v2 --isapplet [ 193.0299 ] USB communication failed.Check if device is in recovery [ 193.0301 ] [ 193.0325 ] tegrarcm_v2 --ismb2 [ 193.0336 ] USB communication failed.Check if device is in recovery [ 193.0339 ] [ 193.0363 ] tegradevflash_v2 --iscpubl [ 193.0374 ] Cannot Open USB [ 193.0376 ] [ 194.0431 ] tegrarcm_v2 --isapplet [ 194.0456 ] USB communication failed.Check if device is in recovery [ 194.0462 ] [ 194.0498 ] tegrarcm_v2 --ismb2 [ 194.0515 ] USB communication failed.Check if device is in recovery [ 194.0519 ] [ 194.0547 ] tegradevflash_v2 --iscpubl [ 194.0560 ] Cannot Open USB [ 194.0563 ] [ 195.0607 ] tegrarcm_v2 --isapplet [ 195.0622 ] USB communication failed.Check if device is in recovery [ 195.0626 ] [ 195.0645 ] tegrarcm_v2 --ismb2 [ 195.0660 ] USB communication failed.Check if device is in recovery [ 195.0664 ] [ 195.0693 ] tegradevflash_v2 --iscpubl [ 195.0708 ] Cannot Open USB [ 195.0711 ] [ 196.0766 ] tegrarcm_v2 --isapplet [ 196.0786 ] USB communication failed.Check if device is in recovery [ 196.0790 ] [ 196.0822 ] tegrarcm_v2 --ismb2 [ 196.0836 ] USB communication failed.Check if device is in recovery [ 196.0839 ] [ 196.0866 ] tegradevflash_v2 --iscpubl [ 196.0879 ] Cannot Open USB [ 196.0881 ] [ 197.0906 ] tegrarcm_v2 --isapplet [ 197.0913 ] USB communication failed.Check if device is in recovery [ 197.0915 ] [ 197.0933 ] tegrarcm_v2 --ismb2 [ 197.0938 ] USB communication failed.Check if device is in recovery [ 197.0940 ] [ 197.0958 ] tegradevflash_v2 --iscpubl [ 197.0963 ] Cannot Open USB [ 197.0965 ] [ 198.1001 ] tegrarcm_v2 --isapplet [ 198.1011 ] USB communication failed.Check if device is in recovery [ 198.1014 ] [ 198.1036 ] tegrarcm_v2 --ismb2 [ 198.1044 ] USB communication failed.Check if device is in recovery [ 198.1046 ] [ 198.1068 ] tegradevflash_v2 --iscpubl [ 198.1077 ] Cannot Open USB [ 198.1078 ] [ 199.1111 ] tegrarcm_v2 --isapplet [ 199.1119 ] USB communication failed.Check if device is in recovery [ 199.1120 ] [ 199.1139 ] tegrarcm_v2 --ismb2 [ 199.1146 ] USB communication failed.Check if device is in recovery [ 199.1147 ] [ 199.1167 ] tegradevflash_v2 --iscpubl [ 199.1174 ] Cannot Open USB [ 199.1175 ] Error: None of the bootloaders are running on device. Check the UART log. Failed flashing t186ref.