root@anycon-desktop:/home/anycon# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (vvdn@vvdn-pc) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0e eb7f91977701] (Linaro GCC 7.3-2018.05) ) #8 SMP PREEMPT Wed Nov 25 18:12:08 IST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2032640 [ 0.000000] DMA zone: 7184 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 459776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1ffd02000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2000880 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt us bcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29096(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7191144K/8130560K available (14910K kernel code, 2808K rwdata, 6588K rodata, 8384K init, 611K bss, 185752K reserved, 753 664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f10000 ( 14912 KB) [ 0.000000] .rodata : 0xffffff8008f10000 - 0xffffff8009590000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009590000 - 0xffffff8009dc0000 ( 8384 KB) [ 0.000000] .data : 0xffffff8009dc0000 - 0xffffff800a07e008 ( 2809 KB) [ 0.000000] .bss : 0xffffff800a07e008 - 0xffffff800a116ea4 ( 612 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000790] Console: colour dummy device 80x25 [ 0.000802] console [tty0] enabled [ 0.000810] bootconsole [tegra_comb_uart0] disabled [ 0.000823] kmemleak: Kernel memory leak detector disabled [ 0.000841] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000856] pid_max: default: 32768 minimum: 301 [ 0.001928] Security Framework initialized [ 0.002542] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002553] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004212] ftrace: allocating 46203 entries in 181 pages [ 0.396297] sched-energy: Sched-energy-costs installed from DT [ 0.396317] ASID allocator initialised with 65536 entries [ 0.431310] tegra-id: chipid=21917. [ 0.431322] tegra-id: opt_subrevision=1. [ 0.431350] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.431365] DTS File Name: /home/vvdn/ancs_sais/git_code/ancs_sgat/Linux_for_Tegra/source/kernel/kernel/kernel-4.9/arch/arm64/boot/dts/../.. /../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.431374] DTB Build time: Nov 27 2020 15:19:01 [ 0.479407] CPU1: Booted secondary processor [4e0f0040] [ 0.511505] CPU2: Booted secondary processor [4e0f0040] [ 0.543548] CPU3: Booted secondary processor [4e0f0040] [ 0.575838] CPU4: Booted secondary processor [4e0f0040] [ 0.607789] CPU5: Booted secondary processor [4e0f0040] [ 0.608009] Brought up 6 CPUs [ 0.608019] SMP: Total of 6 processors activated. [ 0.608028] CPU features: detected feature: Privileged Access Never [ 0.608035] CPU features: detected feature: LSE atomic instructions [ 0.608041] CPU features: detected feature: User Access Override [ 0.608047] CPU features: detected feature: 32-bit EL0 Support [ 0.609472] CPU: All CPU(s) started at EL2 [ 0.609535] alternatives: patching kernel code [ 0.615906] devtmpfs: initialized [ 0.651811] Initilizing CustomIPI irq domain [ 0.652055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.652097] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.671364] pinctrl core: initialized pinctrl subsystem [ 0.671589] OS set in device tree is not L4T. [ 0.671840] regulator-dummy: no parameters [ 0.672033] Initializing plugin-manager [ 0.672085] Plugin module not found [ 0.672121] Plugin-manager status disabled [ 0.673417] NET: Registered protocol family 16 [ 0.674553] pstore: using zlib compression [ 0.674602] console [pstore-1] enabled [ 0.674611] pstore: Registered ramoops as persistent store backend [ 0.674620] ramoops: attached 0x200000@0xf0600000, ecc: 0/0 [ 0.690398] cpuidle: using governor menu [ 0.691318] bpmp: waiting for handshake [ 0.691352] bpmp: handshake completed [ 0.691371] bpmp: synchronizing channels [ 0.691383] bpmp: channels synchronized [ 0.691392] bpmp: mail init ok [ 0.693767] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.693931] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.693964] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.693971] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.693977] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.693982] t19x-arm-smmu 12000000.iommu: nested translation [ 0.693991] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.694001] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.694032] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.694039] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.694045] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.696890] vdso: 2 pages (1 code @ ffffff8008f17000, 1 data @ ffffff8009dc4000) [ 0.696926] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.699556] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.700654] tegra_aon_clk_init: ok [ 0.700667] Registering BPMP clocks... [ 0.700770] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.701283] Serial: AMBA PL011 UART driver [ 0.701433] tegra_powergate_init: DONE [ 0.701496] DTS File Name: /home/vvdn/ancs_sais/git_code/ancs_sgat/Linux_for_Tegra/source/kernel/kernel/kernel-4.9/arch/arm64/boot/dts/../.. /../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.701511] DTB Build time: Nov 27 2020 15:19:01 [ 0.703819] Tegra reboot handler registered. [ 0.710256] iommu: Adding device 14160000.pcie to group 0 [ 0.710875] iommu: Adding device 141a0000.pcie to group 1 [ 0.712030] iommu: Adding device 2490000.ether_qos to group 2 [ 0.712418] iommu: Adding device 3100000.serial to group 3 [ 0.712842] iommu: Adding device 3110000.serial to group 4 [ 0.713174] iommu: Adding device 3140000.serial to group 5 [ 0.713646] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.713801] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.713830] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.713855] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.713863] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.713911] tegra-pmc: PMC Prod config success [ 0.714083] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.714096] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.714341] iommu: Adding device 3460000.sdhci to group 6 [ 0.714818] iommu: Adding device 3440000.sdhci to group 7 [ 0.715218] iommu: Adding device 3210000.spi to group 8 [ 0.715576] iommu: Adding device 3230000.spi to group 9 [ 0.715896] iommu: Adding device 3270000.spi to group 10 [ 0.716728] iommu: Adding device 3160000.i2c to group 11 [ 0.717071] iommu: Adding device c240000.i2c to group 12 [ 0.717388] iommu: Adding device 3180000.i2c to group 13 [ 0.717693] iommu: Adding device 3190000.i2c to group 14 [ 0.718127] iommu: Adding device 31b0000.i2c to group 15 [ 0.718444] iommu: Adding device 31c0000.i2c to group 16 [ 0.718844] iommu: Adding device c250000.i2c to group 17 [ 0.719190] iommu: Adding device 31e0000.i2c to group 18 [ 0.719716] iommu: Adding device sound to group 19 [ 0.720179] iommu: Adding device 3510000.hda to group 20 [ 0.720678] iommu: Adding device bc00000.rtcpu to group 21 [ 0.722597] iommu: Adding device 13e10000.host1x to group 22 [ 0.722936] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.723285] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.723656] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.723985] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.724300] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.724682] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.725127] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.725452] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.725954] iommu: Adding device 15340000.vic to group 31 [ 0.726290] iommu: Adding device 15380000.nvjpg to group 32 [ 0.726540] iommu: Adding device 15500000.tsec to group 33 [ 0.726819] iommu: Adding device 15100000.tsecb to group 34 [ 0.727052] iommu: Adding device 15480000.nvdec to group 35 [ 0.727307] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.727528] iommu: Adding device 154c0000.nvenc to group 37 [ 0.727760] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.728114] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.728459] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.728914] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.732867] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.732928] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.733517] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.733560] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.734934] iommu: Adding device 15c10000.vi to group 43 [ 0.735100] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.735421] iommu: Adding device 14800000.isp to group 44 [ 0.736280] iommu: Adding device 16000000.pva0 to group 45 [ 0.736745] iommu: Adding device 16800000.pva1 to group 46 [ 0.737087] iommu: Adding device 15810000.se to group 47 [ 0.737457] iommu: Adding device 15820000.se to group 48 [ 0.737688] iommu: Adding device 15830000.se to group 49 [ 0.737914] iommu: Adding device 15840000.se to group 50 [ 0.738188] iommu: Adding device c1a0000.aon to group 51 [ 0.739570] iommu: Adding device d000000.bpmp to group 52 [ 0.739860] bpmp: ping status is 0 [ 0.740033] bpmp d000000.bpmp: firmware tag is 57f8a77779f848bf2ecf21dabee5645f [ 0.742849] bpmp d000000.bpmp: probe ok [ 0.744235] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.744668] iommu: Adding device smmu_test to group 53 [ 0.745740] mc: mapped MMIO address: 0xffffff800a4e0000 -> 0x2c10000 [ 0.745765] mc: mapped MMIO address: 0xffffff800a6b0000 -> 0x2c20000 [ 0.745788] mc: mapped MMIO address: 0xffffff800a6d0000 -> 0x2c30000 [ 0.745809] mc: mapped MMIO address: 0xffffff800a6f0000 -> 0x2c40000 [ 0.745828] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c50000 [ 0.745847] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2b80000 [ 0.745865] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2b90000 [ 0.745884] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2ba0000 [ 0.745903] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2bb0000 [ 0.745921] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x1700000 [ 0.745951] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x1710000 [ 0.745975] mc: mapped MMIO address: 0xffffff800b010000 -> 0x1720000 [ 0.745992] mc: mapped MMIO address: 0xffffff800b030000 -> 0x1730000 [ 0.746013] mc: mapped MMIO address: 0xffffff800b050000 -> 0x1740000 [ 0.746029] mc: mapped MMIO address: 0xffffff800b070000 -> 0x1750000 [ 0.746044] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1760000 [ 0.746060] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1770000 [ 0.746126] mc-err: mcerr ops are set to t19x [ 0.750988] iommu: Adding device 2600000.dma to group 54 [ 0.755783] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.757017] GPIO line 339 (wifi-enable) hogged as output/high [ 0.757053] GPIO line 446 (vcc-lte-en) hogged as output/low [ 0.757088] GPIO line 429 (usbhub-reset) hogged as output/high [ 0.757123] GPIO line 428 (led-hub) hogged as output/high [ 0.757156] GPIO line 445 (tpm-rst) hogged as output/low [ 0.757199] GPIO line 484 (lte-rst) hogged as output/high [ 0.757239] GPIO line 480 (poe-tpl) hogged as input [ 0.757277] GPIO line 481 (poe-tph) hogged as input [ 0.757316] GPIO line 482 (poe-bt) hogged as input [ 0.757350] GPIO line 422 (pcie1-dev-off) hogged as output/low [ 0.757384] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.757416] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.757668] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.762852] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.762925] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.762958] GPIO line 251 (pd-reset) hogged as output/high [ 0.762987] GPIO line 266 (vcc-ssd-en) hogged as output/high [ 0.763270] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.765088] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.765099] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.765815] iommu: Adding device 3550000.xudc to group 55 [ 0.766478] iommu: Adding device 3610000.xhci to group 56 [ 0.768544] arm64_ras arm64_ras: probed [ 0.768890] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.768934] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.769009] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.769083] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.769155] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.769212] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.769388] carmel_ras_enable: RAS enabled on cpu0 [ 0.769557] carmel_ras_enable: RAS enabled on cpu1 [ 0.769747] carmel_ras_enable: RAS enabled on cpu2 [ 0.769931] carmel_ras_enable: RAS enabled on cpu3 [ 0.770128] carmel_ras_enable: RAS enabled on cpu4 [ 0.770301] carmel_ras_enable: RAS enabled on cpu5 [ 0.770359] carmel_ras carmel_ras: probed [ 0.771416] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.771885] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.772639] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.773370] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.774103] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.774458] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.775519] vdd-ac-bat: 5000 mV [ 0.775795] vdd-sdmmc3-sw: 3300 mV [ 0.776100] vdd-1v8-sd: 1800 mV [ 0.776459] vdd-3v3-cvb: 3300 mV [ 0.776826] vdd-1v8-cvb: 1800 mV [ 0.777163] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.777209] vdd-epb-1v0: 1000 mV [ 0.777536] avdd-cam-2v8: 2800 mV [ 0.777811] vdd-fan: 5000 mV [ 0.778056] vdd-hdmi-5v0: 5000 mV [ 0.778284] vdd_sys_en: 1200 mV [ 0.805177] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.809544] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.809832] SCSI subsystem initialized [ 0.810132] libata version 3.00 loaded. [ 0.810363] usbcore: registered new interface driver usbfs [ 0.810406] usbcore: registered new interface driver hub [ 0.810501] usbcore: registered new device driver usb [ 0.813389] tegra-i2c 3160000.i2c: no acknowledge from address 0x21 [ 0.813432] pca953x 0-0021: failed reading register [ 0.813527] pca953x: probe of 0-0021 failed with error -121 [ 0.823534] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.826114] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.835439] vdd-1v0: at 1000 mV [ 0.843425] vdd-1v8-hs: at 1800 mV [ 0.851465] vdd-1v8-ls: at 1800 mV [ 0.859506] vdd-1v8-ao: at 1800 mV [ 0.867509] vddio-ddr-1v1: at 1100 mV [ 0.875297] vdd-rtc: at 800 mV [ 0.876507] spmic-ldo1: at 2375 mV [ 0.887331] vdd-ao-3v3: at 3300 mV [ 0.899390] vddio-emmc-3v3: at 3300 mV [ 0.900658] spmic-ldo4: at 1587 mV [ 0.911437] vdd-usb-3v3: at 3300 mV [ 0.923478] vddio-sdmmc1-3v3: at 3300 mV [ 0.931514] vdd-csi-1v2: at 1200 mV [ 0.933190] spmic-ldo8: at 1800 mV [ 0.938181] GPIO line 246 (gpio_default) hogged as output/high [ 0.939559] GPIO line 247 (gpio_default) hogged as output/high [ 0.939822] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.940120] max77620 4-003c: max77620 probe successful [ 0.940619] media: Linux media interface: v0.10 [ 0.940715] Linux video capture interface: v2.00 [ 0.942183] pps_core: LinuxPPS API ver. 1 registered [ 0.942190] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.942285] PTP clock support registered [ 0.942614] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.942882] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.942912] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.945228] trusty trusty: trusty version: Built: 21:16:17 Jun 25 2020 [ 0.945291] trusty trusty: selected api version: 3 (requested 3) [ 0.946150] Advanced Linux Sound Architecture Driver Initialized. [ 0.948776] camchar: rtcpu character device driver loaded [ 0.949214] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.949288] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.950022] clocksource: Switched to clocksource arch_sys_counter [ 0.992281] VFS: Disk quotas dquot_6.6.0 [ 0.992383] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.992735] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.993978] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.994069] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.994258] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.994267] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.994279] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.994287] nvmap_page_pool_init: Total RAM pages: 1986202 [ 0.994294] nvmap_page_pool_init: nvmap page pool size: 248275 pages (969 MB) [ 0.994484] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.995058] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.995972] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.007301] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.007449] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.007602] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.007742] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.007880] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.009047] la/ptsa driver initialized. [ 1.009338] NET: Registered protocol family 2 [ 1.010158] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.010483] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.011063] TCP: Hash tables configured (established 65536 bind 65536) [ 1.011107] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.011224] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.011549] NET: Registered protocol family 1 [ 1.012171] RPC: Registered named UNIX socket transport module. [ 1.012178] RPC: Registered udp transport module. [ 1.012184] RPC: Registered tcp transport module. [ 1.012189] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.012199] PCI: CLS 0 bytes, default 64 [ 1.012380] Trying to unpack rootfs image as initramfs... [ 1.196586] Freeing initrd memory: 5432K [ 1.208721] random: fast init done [ 1.212866] host1x 13e10000.host1x: initialized [ 1.214546] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.219069] audit: initializing netlink subsys (disabled) [ 1.219121] audit: type=2000 audit(0.848:1): initialized [ 1.219903] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.227116] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.228148] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.228662] 9p: Installing v9fs 9p2000 file system support [ 1.234769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.234937] io scheduler noop registered [ 1.235138] io scheduler cfq registered (default) [ 1.238666] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.273210] iommu: Adding device 2993000.adsp to group 57 [ 1.380065] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.381037] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.392664] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.393086] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.393650] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.394061] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.394407] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.396902] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.397063] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.399891] tsec 15500000.tsec: initialized [ 1.401626] tsec 15100000.tsecb: initialized [ 1.405596] nvdec 15480000.nvdec: initialized [ 1.408480] nvdec 15140000.nvdec1: initialized [ 1.414278] falcon 15340000.vic: initialized [ 1.416104] falcon 15380000.nvjpg: initialized [ 1.417910] falcon 154c0000.nvenc: initialized [ 1.419778] falcon 15a80000.nvenc1: initialized [ 1.423247] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.426124] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.427817] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.429386] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.430983] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.432534] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.434107] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.435613] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.439068] t194-nvcsi 15a00000.nvcsi: initialized [ 1.444005] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.444402] scare-pigeon 14b00000.isp-thi: initialized [ 1.449742] pva 16000000.pva0: initialized [ 1.455162] pva 16800000.pva1: initialized [ 1.460015] nvdla 15880000.nvdla0: initialized [ 1.464552] nvdla 158c0000.nvdla1: initialized [ 1.465575] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.465589] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.465625] tegradccommon 15200000.dc_common: dma mapping done [ 1.466244] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.466254] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.466505] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.466529] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.466747] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.466755] tegra_cec 3960000.tegra_cec: probed [ 1.467296] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.467327] tegradc 15200000.nvdisplay: tegra_dc_parse_panel_ops: panel: /host1x/sor1/hdmi-display is not active [ 1.467384] tegradc 15200000.nvdisplay: err:-19 parsing panel_ops [ 1.467818] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor [ 1.467844] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.467926] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.467953] tegradc 15210000.nvdisplay: Display dc.ffffff800bc50000 registered with id=0 [ 1.471856] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.471870] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.471881] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.472106] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.472115] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.479863] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.480784] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.480796] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.481214] kfuse 3830000.kfuse: initialized [ 1.484667] tegradc 15210000.nvdisplay: probed [ 1.485204] Console: switching to colour frame buffer device 80x30 [ 1.485234] tegradc 15210000.nvdisplay: fb registered [ 1.488911] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.488920] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.488935] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.488948] tegradc 15210000.nvdisplay: blank - powerdown [ 1.489026] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.489032] Extcon DP: HPD disabled [ 1.489038] hpd: hpd_switch 0 [ 1.489043] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.489058] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.489066] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.489434] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.491632] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.492629] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.493289] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.494533] console [ttyTCU0] enabled [ 1.494763] [drm] Initialized [ 1.504775] brd: module loaded [ 1.509601] loop: module loaded [ 1.509702] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.509833] tegra_profiler: auth: init [ 1.510444] THERMAL EST: found 3 subdevs [ 1.510452] THERMAL EST num_resources: 0 [ 1.510459] [THERMAL EST subdev 0] [ 1.510465] [THERMAL EST subdev 1] [ 1.510471] [THERMAL EST subdev 2] [ 1.510481] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.510728] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.510733] THERMAL EST: thz register success. [ 1.510870] THERMAL EST: end of probe, return err: 0 [ 1.511439] sd: No Scsi addr parsed to reserve index [ 1.511471] hisi_sas: driver version v1.6 [ 1.520484] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.520493] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.520503] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.520782] 1 ofpart partitions found on MTD device spi6.0 [ 1.520793] Creating 1 MTD partitions on "spi6.0": [ 1.520809] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.522963] libphy: Fixed MDIO Bus: probed [ 1.524520] tun: Universal TUN/TAP device driver, 1.6 [ 1.524526] tun: (C) 1999-2004 Max Krasnyansky [ 1.525219] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.525225] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.525258] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.525263] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.525289] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.525294] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.525322] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.525327] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.769555] eqos_get_mac_address_dtb: bad mac address at /chosen/nvidia,ether-mac: null. [ 1.769750] eqos 2490000.ether_qos (unnamed net_device) (uninitialized): ether-mac read from DT failed -99 [ 1.769965] eqos 2490000.ether_qos (unnamed net_device) (uninitialized): EQOS using random MAC address: 36:52:a4:75:69:e2 [ 1.770196] libphy: dwc_phy: probed [ 1.772361] PPP generic driver version 2.4.2 [ 1.772579] PPP BSD Compression module registered [ 1.772586] PPP Deflate Compression module registered [ 1.772604] PPP MPPE Compression module registered [ 1.772611] NET: Registered protocol family 24 [ 1.772658] usbcore: registered new interface driver r8152 [ 1.772723] usbcore: registered new interface driver asix [ 1.772759] usbcore: registered new interface driver ax88179_178a [ 1.772784] usbcore: registered new interface driver cdc_ether [ 1.772807] usbcore: registered new interface driver net1080 [ 1.772830] usbcore: registered new interface driver cdc_subset [ 1.772854] usbcore: registered new interface driver zaurus [ 1.772887] usbcore: registered new interface driver cdc_ncm [ 1.772914] usbcore: registered new interface driver cdc_mbim [ 1.773147] VFIO - User Level meta-driver version: 0.3 [ 1.774451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.774472] ehci-pci: EHCI PCI platform driver [ 1.774510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.774521] ohci-pci: OHCI PCI platform driver [ 1.774584] ohci-platform: OHCI generic platform driver [ 1.779080] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.781023] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4e09c00 id [ 1.781624] usbcore: registered new interface driver cdc_wdm [ 1.781652] usbcore: registered new interface driver uas [ 1.781686] usbcore: registered new interface driver usb-storage [ 1.781746] usbcore: registered new interface driver usbserial [ 1.783404] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.783464] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.783483] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.784206] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.784245] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.784424] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.784432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.784438] usb usb1: Product: xHCI Host Controller [ 1.784443] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.784449] usb usb1: SerialNumber: 3610000.xhci [ 1.784942] hub 1-0:1.0: USB hub found [ 1.784989] hub 1-0:1.0: 4 ports detected [ 1.785473] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.785509] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.785519] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.785701] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.785708] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.785714] usb usb2: Product: xHCI Host Controller [ 1.785720] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.785725] usb usb2: SerialNumber: 3610000.xhci [ 1.786213] hub 2-0:1.0: USB hub found [ 1.786252] hub 2-0:1.0: 4 ports detected [ 1.787093] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.787177] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.788004] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.788015] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.788042] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.788285] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.788705] mousedev: PS/2 mouse device common for all mice [ 1.788767] usbcore: registered new interface driver xpad [ 1.921084] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.922548] Wake73 for irq=42 [ 1.923840] rtc rtc1: alarm rtc device [ 1.923858] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.923883] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.924077] i2c /dev entries driver [ 1.926138] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.926404] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.926412] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.927104] max77620-power max20024-power: Event recorder REG_NVERC : 0xd0 [ 1.927294] sht3x_probe:709, SHT3x Probe called........ [ 1.927787] tegra-i2c c240000.i2c: no acknowledge from address 0x44 [ 1.927844] sht3x: probe of 1-0044 failed with error -121 [ 1.934229] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 1.938444] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 1.938491] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 1.938499] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 1.938613] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 1.938698] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 1.938705] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 1.938948] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 1.938999] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 1.939006] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 1.939286] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 1.939340] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 1.939347] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 1.939707] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 1.939750] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 1.939756] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 1.939996] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 1.940388] FAN dev name: pwm-fan [ 1.940438] FAN:gpio request success. [ 1.940448] FAN: can't find tach_gpio [ 1.940460] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.940515] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.940709] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.940716] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.941297] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.941304] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.941310] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.941316] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.941322] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.941328] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.941334] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.941340] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.941347] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.941353] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.942404] device-mapper: uevent: version 1.0.3 [ 1.942814] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.946406] tegra194_cpufreq_probe: platform driver Initialization: pass [ 1.947328] cpuidle: Initializing cpuidle driver [ 1.948193] sdhci: Secure Digital Host Controller Interface driver [ 1.948199] sdhci: Copyright(c) Pierre Ossman [ 1.948202] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.949649] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.951813] CMDQ: cmdq_platfm_init successful [ 1.952330] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 1.954749] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.956870] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 321 [ 1.961040] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.962002] tegra-se-nvhost 15810000.se: initialized [ 1.963167] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.964167] tegra-se-nvhost 15820000.se: initialized [ 1.965506] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.966445] tegra-se-nvhost 15830000.se: initialized [ 1.967114] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.967956] tegra-se-nvhost 15840000.se: initialized [ 1.969005] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.969359] hidraw: raw HID events driver (C) Jiri Kosina [ 1.971553] usbcore: registered new interface driver usbhid [ 1.971558] usbhid: USB HID core driver [ 1.975610] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 1.976797] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.977263] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.978057] denver_knobs_init:MTS_VERSION:50168445 [ 1.978238] tegra19x_actmon d230000.actmon: in actmon_register()... [ 1.979177] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.979479] t19x_cache tegra-cache: probed [ 1.981796] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 1.981804] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 1.982372] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 1.982661] PLL_AON clock registered [ 1.983939] Clocks initialized successfully [ 1.985301] nvpmodel: initialized successfully [ 1.986461] trusty-virtio trusty:virtio: initializing [ 1.986661] trusty_ipc virtio0: vring0: va(pa) ffffffc1f1418000(0) qsz 32 notifyid 1 [ 1.986690] trusty_ipc virtio0: vring1: va(pa) ffffffc1f141a000(0) qsz 32 notifyid 2 [ 1.986831] trusty-virtio trusty:virtio: initializing done [ 1.987100] trusty_ipc virtio0: is online [ 1.987784] tegra-hda 3510000.hda: Override SDO lines to 4 [ 1.988059] usbcore: registered new interface driver snd-usb-audio [ 1.994093] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.000413] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.000570] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.000714] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.000857] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.002157] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 2.002231] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.040233] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.052941] mmc0: periodic cache flush enabled [ 2.052953] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.053515] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.053767] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.058076] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.062311] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.067406] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.070363] OPE platform probe [ 2.070452] OPE platform probe successful [ 2.110061] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.130677] usb 1-2: New USB device found, idVendor=0451, idProduct=8442 [ 2.130685] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.130690] usb 1-2: SerialNumber: 1D000069C998 [ 2.131619] hub 1-2:1.0: USB hub found [ 2.131701] hub 1-2:1.0: 6 ports detected [ 2.139179] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.139293] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.139419] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.139507] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.139592] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.139694] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.139782] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.139866] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.139969] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.140073] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.140150] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.140250] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.140330] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.140434] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.140510] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.140595] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.140691] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.140790] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.140877] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.140947] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.167682] u32 classifier [ 2.167688] Actions configured [ 2.167767] Initializing XFRM netlink socket [ 2.168306] NET: Registered protocol family 10 [ 2.169050] NET: Registered protocol family 17 [ 2.169064] NET: Registered protocol family 15 [ 2.169118] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need t his. [ 2.169137] 9pnet: Installing 9P2000 support [ 2.169172] Key type dns_resolver registered [ 2.169499] Registered cp15_barrier emulation handler [ 2.169524] Registered setend emulation handler [ 2.171145] registered taskstats version 1 [ 2.171624] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.172708] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.172734] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.172743] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.172748] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.282061] tegra-pcie-dw 14160000.pcie: link is up [ 2.282313] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.282322] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.282330] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.282336] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.282341] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.282367] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.282518] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.282727] iommu: Adding device 0004:00:00.0 to group 59 [ 2.283016] pci 0004:01:00.0: [8086:1531] type 00 class 0x020000 [ 2.283132] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x007fffff] [ 2.283247] pci 0004:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 2.283252] pci 0004:01:00.0: reg 0x18: [io size 0x0020] [ 2.283311] pci 0004:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 2.284101] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold [ 2.284411] iommu: Adding device 0004:01:00.0 to group 60 [ 2.295014] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x1740bfffff] [ 2.295023] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.295031] pci 0004:01:00.0: BAR 0: assigned [mem 0x1740000000-0x17407fffff] [ 2.295076] pci 0004:01:00.0: BAR 3: assigned [mem 0x1740800000-0x1740803fff] [ 2.295103] pci 0004:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 2.295131] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.295137] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.295145] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x1740bfffff] [ 2.295163] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.295223] pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 2.295525] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.295531] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.295553] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.295630] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.295900] igb 0004:01:00.0: enabling device (0000 -> 0002) [ 2.308631] igb 0004:01:00.0: The NVM Checksum Is Not Valid [ 2.308782] igb 0004:01:00.0: Invalid MAC Address [ 2.326762] igb 0004:01:00.0 (unnamed net_device) (uninitialized): igb: eth%d NIC Link is Down [ 2.327588] pps_core: source ptp0 got cdev (248:0) [ 2.327596] pps pps0: new PPS source ptp0 [ 2.327603] igb 0004:01:00.0: added PHC on eth1 [ 2.327607] igb 0004:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.327614] igb 0004:01:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 26:84:a8:b0:ec:45 [ 2.327703] igb 0004:01:00.0: eth1: PBA No: 000000-000 [ 2.327707] igb 0004:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.328098] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.329019] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.329038] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.329045] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.329051] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.418095] usb 1-2.5: new high-speed USB device number 3 using tegra-xusb [ 2.438481] usb 1-2.5: New USB device found, idVendor=0451, idProduct=82ff [ 2.438487] usb 1-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.439999] hid-generic 0003:0451:82FF.0001: hidraw0: USB HID v1.11 Device [HID 0451:82ff] on usb-3610000.xhci-2.5/input0 [ 2.478092] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.478099] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.842172] tegra-pcie-dw 141a0000.pcie: link is down [ 2.842257] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.842263] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.842270] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.842276] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.842281] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.842305] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.842434] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.842618] iommu: Adding device 0005:00:00.0 to group 61 [ 2.842778] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.842800] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.842964] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.842972] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.843059] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.843207] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 2.843247] aer 0005:00:00.0:pcie002: unloading service driver aer [ 2.843352] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 2.843435] iommu: Removing device 0005:00:00.0 from group 61 [ 2.843456] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 2.845150] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 2.854265] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 2.861831] tegra194-isp5 14800000.isp: initialized [ 2.868462] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.873406] tegra194-vi5 15c10000.vi: initialized [ 2.878164] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.878230] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.878947] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.962132] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 2.962413] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 2.962605] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 2.962752] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 2.963097] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 2.963158] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 2.963429] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 2.963435] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 2.964316] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 2.964784] gpio tegra-gpio wake67 for gpio=48(G:0) [ 2.964878] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 2.965005] input: gpio-keys as /devices/gpio-keys/input/input4 [ 2.991139] tegra_rtc c2a0000.rtc: setting system clock to 2020-11-28 05:44:30 UTC (1606542270) [ 2.991672] mmcblk mmc0:0001: Card claimed for testing. [ 3.025628] bpmp: mounted debugfs mirror [ 3.031852] vdd-sdmmc3-sw: disabling [ 3.031858] vdd-1v8-sd: disabling [ 3.031862] vdd-1v8-cvb: disabling [ 3.031866] vdd-epb-1v0: disabling [ 3.031869] avdd-cam-2v8: disabling [ 3.031872] vdd-fan: disabling [ 3.031876] vdd_sys_en: disabling [ 3.031883] ALSA device list: [ 3.031886] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 3.031901] #1: jetson-xaviernx-ape [ 3.033686] Freeing unused kernel memory: 8384K [ 3.070214] Root device found: mmcblk0p1 [ 3.071491] Found dev node: /dev/mmcblk0p1 [ 3.144533] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 3.144540] EXT4-fs (mmcblk0p1): recovery complete [ 3.148901] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.149948] Rootfs mounted over mmcblk0p1 [ 3.172273] Switching from initrd to actual rootfs [ 3.300459] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.303323] cgroup: cgroup2: unknown option "nsdelegate" [ 3.311044] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRY PT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.311718] systemd[1]: Detected architecture arm64. [ 3.316909] systemd[1]: Set hostname to . [ 3.399051] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local sy stem does not support BPF/cgroup based firewalling. [ 3.399064] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling .) [ 3.543192] random: systemd: uninitialized urandom read (16 bytes read) [ 3.545726] systemd[1]: Created slice User and Session Slice. [ 3.545854] random: systemd: uninitialized urandom read (16 bytes read) [ 3.545876] systemd[1]: Reached target User and Group Name Lookups. [ 3.545934] random: systemd: uninitialized urandom read (16 bytes read) [ 3.546982] systemd[1]: Created slice System Slice. [ 3.548035] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.548622] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.584992] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.884831] systemd-journald[2323]: Received request to flush runtime journal from PID 1 [ 4.072961] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.350113] using random self ethernet address [ 4.350241] using random host ethernet address [ 4.875640] Mass Storage Function, version: 2009/09/11 [ 4.875651] LUN: removable file: (no medium) [ 4.884268] using random self ethernet address [ 4.884397] using random host ethernet address [ 4.913048] rndis0: HOST MAC 1a:da:05:a7:b3:ec [ 4.913138] rndis0: MAC 1a:da:05:a7:b3:ed [ 4.914767] usb0: HOST MAC 1a:da:05:a7:b3:ee [ 4.914968] usb0: MAC 1a:da:05:a7:b3:ef [ 4.914992] tegra-xudc-new 3550000.xudc: exiting ELPG [ 4.915831] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 4.915851] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.915889] tegra-xudc-new 3550000.xudc: entering ELPG [ 4.916076] tegra-xudc-new 3550000.xudc: entering ELPG done [ 4.916099] tegra-xudc-new 3550000.xudc: exiting ELPG [ 4.916777] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 4.916798] tegra-xudc-new 3550000.xudc: entering ELPG [ 4.916975] tegra-xudc-new 3550000.xudc: entering ELPG done [ 4.923237] l4tbr0: port 1(rndis0) entered blocking state [ 4.923244] l4tbr0: port 1(rndis0) entered disabled state [ 4.923411] device rndis0 entered promiscuous mode [ 4.928955] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.938815] l4tbr0: port 2(usb0) entered blocking state [ 4.938830] l4tbr0: port 2(usb0) entered disabled state [ 4.939028] device usb0 entered promiscuous mode [ 4.955918] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.017388] random: crng init done [ 5.017517] random: 7 urandom warning(s) missed due to ratelimiting [ 5.318651] ras_fhi_disable: FHI 471 disabled [ 5.319799] CPU2: shutdown [ 5.319912] psci: CPU2 killed. [ 5.372163] ras_fhi_disable: FHI 472 disabled [ 5.379527] CPU3: shutdown [ 5.398175] psci: Retrying again to check for CPU kill [ 5.398199] psci: CPU3 killed. [ 5.462622] ras_fhi_disable: FHI 473 disabled [ 5.463360] CPU4: shutdown [ 5.463473] psci: CPU4 killed. [ 5.542000] igb: ancs calling mac_write [ 5.551636] ras_fhi_disable: FHI 474 disabled [ 5.557537] CPU5: shutdown [ 5.574129] psci: Retrying again to check for CPU kill [ 5.574150] psci: CPU5 killed. [ 5.577872] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 5.882248] zram: Added device: zram0 [ 5.886481] zram: Added device: zram1 [ 5.932113] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.969807] Wake76 for irq=199 [ 5.969815] Wake77 for irq=199 [ 5.969819] Wake78 for irq=199 [ 5.969823] Wake79 for irq=199 [ 5.969829] Wake80 for irq=199 [ 5.969833] Wake81 for irq=199 [ 5.969836] Wake82 for irq=199 [ 5.969892] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 5.969899] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 5.982582] zram0: detected capacity change from 0 to 2037407744 [ 6.035900] Adding 1989652k swap on /dev/zram0. Priority:5 extents:1 across:1989652k SS [ 6.055744] zram1: detected capacity change from 0 to 2037407744 [ 6.087897] Adding 1989652k swap on /dev/zram1. Priority:5 extents:1 across:1989652k SS [ 6.171043] tpm_tis_spi_probe:194- Probe function started [ 6.266950] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.271785] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.290340] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 6.304936] tpm_tis_spi spi0.0: 2.0 TPM (device-id 0x1B, rev-id 22) [ 6.305262] tpm_tis_core_init:797- Probe function Done [ 6.310508] usb 2-3: New USB device found, idVendor=0451, idProduct=8440 [ 6.310519] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.312142] hub 2-3:1.0: USB hub found [ 6.312215] hub 2-3:1.0: 4 ports detected [ 6.335757] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 6.347350] ANYCON_GPIO_DRV..................is here [ 6.347363] anycon-gpio-manager anycon-gpio: probed [ 6.347566] anycon-gpio-manager anycon-gpio: gpioReset:417 gpioTamper:419 [ 6.347705] input: anycon-button as /devices/anycon-gpio/input/input5 [ 6.348016] gpio tegra-gpio wake40 for gpio=129(Q:1) [ 6.348197] gpio tegra-gpio wake38 for gpio=131(Q:3) [ 6.354233] tpm tpm0: A TPM error (256) occurred continue selftest [ 6.361536] ANYCON_GPIO_DRV: Wait queue thread creation successful [ 6.361572] ANYCON_GPIO_DRV: Waiting for event [ 6.466089] usb 2-3: usb_suspend_both: status 0 [ 6.466356] usb usb2: usb_suspend_both: status 0 [ 6.626648] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.193055] tegradc 15210000.nvdisplay: blank - powerdown [ 9.348480] tegradc 15210000.nvdisplay: blank - powerdown [ 10.164087] fuse init (API version 7.26) [ 11.037340] ANYCON_GPIO_DRV: input device opened() [ 11.093521] ANYCON_GPIO_DRV: input device closed() [ 56.230932] igb 0004:01:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 56.338667] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 305.038340] FAN rising trip_level:1 cur_temp:46250 trip_temps[2]:60000 [ 753.586161] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 753.586533] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 753.586572] tegra-xudc-new 3550000.xudc: exiting ELPG [ 753.588320] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 753.588395] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 753.588428] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 753.788203] android_work: did not send uevent (0 0 (null)) [ 753.861307] android_work: sent uevent USB_STATE=CONNECTED [ 753.916785] android_work: sent uevent USB_STATE=DISCONNECTED [ 754.008920] android_work: sent uevent USB_STATE=CONNECTED [ 754.010595] configfs-gadget gadget: high-speed config #1: c [ 754.010625] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 754.010639] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 754.010654] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 754.010745] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 754.010758] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 754.010770] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 754.010872] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 754.010916] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 754.011143] android_work: sent uevent USB_STATE=CONFIGURED [ 754.011185] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 754.011199] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 754.018060] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 754.018076] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 754.018471] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 754.018591] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 754.036919] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 754.036937] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 754.037136] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 757.111815] l4tbr0: port 2(usb0) entered blocking state [ 757.111826] l4tbr0: port 2(usb0) entered forwarding state [ 757.111932] l4tbr0: port 1(rndis0) entered blocking state [ 757.111949] l4tbr0: port 1(rndis0) entered forwarding state [ 757.112050] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 757.112067] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 761.844571] tegradc 15210000.nvdisplay: dp: plug event received [ 761.844608] hpd: state 3 (Disabled), hpd 1, pending_hpd_evt 1 [ 761.844615] hpd: switching from state 3 (Disabled) to state 0 (Reset) [ 761.946047] hpd: state 0 (Reset), hpd 1, pending_hpd_evt 0 [ 761.946067] tegradc 15210000.nvdisplay: blank - powerdown [ 761.946797] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 761.981555] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 761.981563] Extcon DP: HPD disabled [ 761.981568] hpd: hpd_switch 0 [ 761.981573] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 761.981593] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 761.981601] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 761.982980] tegradc 15210000.nvdisplay: blank - powerdown [ 761.986102] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 761.991499] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 761.992309] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 761.992431] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 761.992536] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 761.994500] Parent Clock set for DC pll_d [ 761.999194] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.009539] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.009803] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.009814] dp lt: state 0 (Reset), pending_lt_evt 1 [ 762.009819] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 762.009825] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.011465] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 762.011476] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 762.011726] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 762.011738] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 762.011749] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 762.011759] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 762.011791] dp lt: tx_pu: 0x20 [ 762.012751] dp lt: CR done [ 762.012760] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 762.012768] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 762.015277] dp lt: CE done [ 762.015287] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 762.015567] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.015808] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.016048] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.016290] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.016528] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.016766] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.017004] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.017243] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.017481] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.017718] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.017724] tegradc 15210000.nvdisplay: blank - powerdown [ 762.048713] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 762.048718] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 762.048723] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.048730] dp lt: link training force disable [ 762.048733] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 762.072387] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 762.072531] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 762.073491] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 762.073873] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.074236] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.077022] tegradc 15210000.nvdisplay: unblank [ 762.078482] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 762.078592] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 762.078692] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 762.080241] Parent Clock set for DC pll_d [ 762.086776] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.096268] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.096277] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 762.096282] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 762.096286] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.097829] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 762.097836] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 762.098089] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 762.098099] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 762.098110] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 762.098119] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 762.098126] dp lt: tx_pu: 0x20 [ 762.099062] dp lt: CR done [ 762.099067] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 762.099100] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 762.101593] dp lt: CE done [ 762.101597] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 762.101908] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.104101] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.104358] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.104609] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.104859] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.105118] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.105375] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.105623] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.105868] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.106056] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.106063] tegradc 15210000.nvdisplay: blank - powerdown [ 762.134995] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 762.135000] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 762.135004] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.135011] dp lt: link training force disable [ 762.135014] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 762.158382] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 762.158458] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 762.158953] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 762.159313] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.159332] tegradc 15210000.nvdisplay: unblank [ 762.162773] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 762.162913] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 762.163668] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 762.165449] Parent Clock set for DC pll_d [ 762.172016] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.180891] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.180901] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 762.180905] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 762.180909] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.182490] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 762.182497] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 762.182751] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 762.182760] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 762.182770] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 762.182779] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 762.182786] dp lt: tx_pu: 0x20 [ 762.183719] dp lt: CR done [ 762.183725] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 762.183731] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 762.186222] dp lt: CE done [ 762.186227] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 762.186361] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 762.186366] Extcon DP: HPD enabled [ 762.186393] hpd: Display connected, hpd_switch 1 [ 762.186399] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 762.186886] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.187169] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.187444] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.188793] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.189113] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.189387] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.189681] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.189954] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.190296] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.190572] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 762.195418] tegradc 15210000.nvdisplay: blank - powerdown [ 762.219662] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 762.219668] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 762.219672] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.219680] dp lt: link training force disable [ 762.219684] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 762.242869] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 762.242950] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 762.243482] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 762.292942] tegradc 15210000.nvdisplay: blank - powerdown [ 762.293283] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.293307] tegradc 15210000.nvdisplay: unblank [ 762.294114] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 762.294221] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 762.294327] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 762.296003] Parent Clock set for DC pll_d [ 762.300266] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 762.309391] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 762.309395] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 762.309402] dp lt: state 0 (Reset), pending_lt_evt 0 [ 762.309745] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.310966] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 762.310972] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 762.311217] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 762.311228] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 762.311239] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 762.311250] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 762.311257] dp lt: tx_pu: 0x20 [ 762.312187] dp lt: CR done [ 762.312192] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 762.312196] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 762.314716] dp lt: CE done [ 762.314721] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 762.314808] tegradc 15210000.nvdisplay: unblank [ 762.318390] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.638379] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 762.958379] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 763.278472] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 763.598442] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 763.918379] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 764.238422] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 764.558337] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 797.154079] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 797.178498] usb 1-2.2: New USB device found, idVendor=413c, idProduct=301a [ 797.178586] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 797.178593] usb 1-2.2: Product: Dell MS116 USB Optical Mouse [ 797.178598] usb 1-2.2: Manufacturer: PixArt [ 797.184611] input: PixArt Dell MS116 USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:413C:301A.0002/input/input6 [ 797.185309] hid-generic 0003:413C:301A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3610000.xhci-2. 2/input0 [ 842.969658] tegradc 15210000.nvdisplay: blank - powerdown [ 843.031469] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 843.031474] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 843.031478] dp lt: state 0 (Reset), pending_lt_evt 0 [ 843.031485] dp lt: link training force disable [ 843.031489] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 843.053847] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 843.053921] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 843.054472] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 843.062821] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 843.211720] tegradc 15210000.nvdisplay: blank - powerdown [ 843.212002] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 843.212027] tegradc 15210000.nvdisplay: unblank [ 843.212864] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 843.212975] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 843.213078] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 843.214850] Parent Clock set for DC pll_d [ 843.220692] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 843.230796] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 843.230801] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 843.230806] dp lt: state 0 (Reset), pending_lt_evt 0 [ 843.231297] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 843.232391] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 843.232398] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 843.232648] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 843.232658] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 843.232666] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 843.232675] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 843.232683] dp lt: tx_pu: 0x20 [ 843.233644] dp lt: CR done [ 843.233649] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 843.233654] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 843.236196] dp lt: CE done [ 843.236201] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 843.534398] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 843.854461] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 844.174451] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 844.494401] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 844.814402] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 845.134399] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 845.454667] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 845.774399] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 846.511966] tegradc 15210000.nvdisplay: unblank [ 877.358367] FAN rising trip_level:2 cur_temp:60100 trip_temps[3]:68000 [ 926.136741] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 926.446425] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 926.766382] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 927.086400] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 927.406402] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 927.726408] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 928.050379] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 928.366383] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 928.686418] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 942.652493] tegradc 15210000.nvdisplay: blank - powerdown [ 942.702983] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 942.702989] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 942.702993] dp lt: state 0 (Reset), pending_lt_evt 0 [ 942.703001] dp lt: link training force disable [ 942.703004] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 942.725451] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 942.725561] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 942.726099] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 942.853081] tegradc 15210000.nvdisplay: blank - powerdown [ 942.853367] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 942.853392] tegradc 15210000.nvdisplay: unblank [ 942.854309] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 942.854414] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 942.854518] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 942.859976] Parent Clock set for DC pll_d [ 942.864957] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 942.877097] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 942.877141] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 942.877518] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 942.877527] dp lt: state 0 (Reset), pending_lt_evt 0 [ 942.879154] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 942.879162] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 942.879453] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 942.879463] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 942.879473] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 942.879482] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 942.879489] dp lt: tx_pu: 0x20 [ 942.880471] dp lt: CR done [ 942.880477] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 942.880525] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 942.883432] dp lt: CE done [ 942.883438] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 943.182463] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 943.502400] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 943.822460] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 944.142694] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 944.462514] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 944.782448] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 945.102505] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 945.422483] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 946.224529] tegradc 15210000.nvdisplay: unblank [ 957.604329] tegradc 15210000.nvdisplay: blank - powerdown [ 957.666845] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 957.666850] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 957.666854] dp lt: state 0 (Reset), pending_lt_evt 0 [ 957.666862] dp lt: link training force disable [ 957.666864] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 957.689769] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 957.689848] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 957.690535] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 957.822900] tegradc 15210000.nvdisplay: blank - powerdown [ 957.823239] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 957.823265] tegradc 15210000.nvdisplay: unblank [ 957.824040] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 957.824163] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 957.824270] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 957.826308] Parent Clock set for DC pll_d [ 957.832396] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 957.842313] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 957.842318] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 957.842323] dp lt: state 0 (Reset), pending_lt_evt 0 [ 957.842812] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 957.843904] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 957.843912] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 957.844159] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 957.844168] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 957.844177] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 957.844186] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 957.844194] dp lt: tx_pu: 0x20 [ 957.845129] dp lt: CR done [ 957.845133] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 957.845139] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 957.847600] dp lt: CE done [ 957.847605] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 958.158333] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 958.478352] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 958.798351] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 959.118383] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 959.438350] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 959.758517] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 960.078484] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 960.398336] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 961.065411] tegradc 15210000.nvdisplay: unblank [ 980.607136] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 980.914446] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 981.230401] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 981.550441] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 981.870417] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 982.190423] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 982.510704] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 982.830401] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 983.150382] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1000.765736] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1001.070380] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1001.390378] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1001.710398] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1002.034402] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1002.350376] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1002.670404] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1002.990378] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1003.310386] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1034.258426] tegradc 15210000.nvdisplay: blank - powerdown [ 1034.314390] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1034.314397] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1034.314400] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1034.314469] dp lt: link training force disable [ 1034.314473] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1034.337995] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1034.338158] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1034.338806] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1034.472629] tegradc 15210000.nvdisplay: blank - powerdown [ 1034.472910] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1034.472936] tegradc 15210000.nvdisplay: unblank [ 1034.473821] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1034.473932] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1034.474110] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1034.476354] Parent Clock set for DC pll_d [ 1034.486730] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1034.495804] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1034.495809] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1034.495815] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1034.496247] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1034.497348] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1034.497353] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1034.497592] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1034.497601] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1034.497610] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1034.497619] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1034.497626] dp lt: tx_pu: 0x20 [ 1034.498558] dp lt: CR done [ 1034.498561] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1034.498566] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1034.501050] dp lt: CE done [ 1034.501056] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1034.798419] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1035.118500] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1035.438438] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1035.758462] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1036.078419] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1036.398446] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1036.718419] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1037.038547] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1037.741469] tegradc 15210000.nvdisplay: unblank [ 1101.748900] tegradc 15210000.nvdisplay: blank - powerdown [ 1101.801254] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1101.801260] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1101.801264] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1101.801271] dp lt: link training force disable [ 1101.801298] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1101.827053] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1101.827217] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1101.827934] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1101.963504] tegradc 15210000.nvdisplay: blank - powerdown [ 1101.963896] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1101.963921] tegradc 15210000.nvdisplay: unblank [ 1101.965034] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1101.965214] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1101.965808] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1101.968361] Parent Clock set for DC pll_d [ 1101.972547] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1101.982851] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1101.982889] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1101.982893] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1101.982897] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1101.984590] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1101.984597] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1101.984910] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1101.984921] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1101.984930] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1101.984938] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1101.984946] dp lt: tx_pu: 0x20 [ 1101.985908] dp lt: CR done [ 1101.985914] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1101.985919] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1101.988507] dp lt: CE done [ 1101.988512] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1102.286375] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1102.606394] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1102.926894] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1103.246331] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1103.566397] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1103.886435] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1104.206331] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1104.526404] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1105.238083] tegradc 15210000.nvdisplay: unblank [ 1105.838293] FAN rising trip_level:3 cur_temp:68100 trip_temps[4]:76000 [ 1144.195015] tegradc 15210000.nvdisplay: blank - powerdown [ 1144.255418] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1144.255424] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1144.255429] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1144.255437] dp lt: link training force disable [ 1144.255440] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1144.277973] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1144.278184] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1144.278804] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1144.446778] tegradc 15210000.nvdisplay: blank - powerdown [ 1144.447152] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1144.447177] tegradc 15210000.nvdisplay: unblank [ 1144.448352] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1144.448524] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1144.448689] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1144.451312] Parent Clock set for DC pll_d [ 1144.459046] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1144.468591] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1144.468596] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1144.468601] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1144.469022] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1144.470201] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1144.470207] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1144.470449] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1144.470459] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1144.470468] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1144.470477] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1144.470484] dp lt: tx_pu: 0x20 [ 1144.471415] dp lt: CR done [ 1144.471419] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1144.471424] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1144.473930] dp lt: CE done [ 1144.473935] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1144.782486] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1145.102440] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1145.422448] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1145.742466] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1146.062399] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1146.382366] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1146.702407] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1147.022360] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1147.734229] tegradc 15210000.nvdisplay: unblank [ 1459.830369] tegradc 15210000.nvdisplay: blank - powerdown [ 1459.890658] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1459.890663] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1459.890667] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1459.890674] dp lt: link training force disable [ 1459.890678] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1459.913112] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1459.913190] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1459.913677] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1460.044658] tegradc 15210000.nvdisplay: blank - powerdown [ 1460.045067] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1460.045093] tegradc 15210000.nvdisplay: unblank [ 1460.046319] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1460.046445] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1460.046644] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1460.048673] Parent Clock set for DC pll_d [ 1460.054877] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1460.069373] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1460.069411] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1460.069415] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1460.069418] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1460.071140] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1460.071171] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1460.071422] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1460.071432] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1460.071442] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1460.071493] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1460.071501] dp lt: tx_pu: 0x20 [ 1460.072492] dp lt: CR done [ 1460.072497] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1460.072503] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1460.075234] dp lt: CE done [ 1460.075239] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1460.398417] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1460.718352] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1461.038373] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1461.358456] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1461.678428] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1461.998371] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1462.318376] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1462.638416] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 1463.307363] tegradc 15210000.nvdisplay: unblank