[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1004541 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29768(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147908K/4018164K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 116592K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000956] Console: colour dummy device 80x25 [ 0.000961] console [tty0] enabled [ 0.000964] bootconsole [uart8250] disabled [ 0.000972] kmemleak: Kernel memory leak detector disabled [ 0.000981] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000989] pid_max: default: 32768 minimum: 301 [ 0.001291] Security Framework initialized [ 0.001446] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001450] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002020] ftrace: allocating 47077 entries in 184 pages [ 0.125764] sched-energy: Sched-energy-costs installed from DT [ 0.125775] ASID allocator initialised with 65536 entries [ 0.160878] tegra-id: chipid=21817. [ 0.160884] tegra-id: opt_subrevision=1. [ 0.160902] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.160910] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.160914] DTB Build time: [ 0.210646] CPU1: Booted secondary processor [4e0f0030] [ 0.242011] CPU2: Booted secondary processor [4e0f0030] [ 0.273034] CPU3: Booted secondary processor [411fd073] [ 0.304991] CPU4: Booted secondary processor [411fd073] [ 0.336986] CPU5: Booted secondary processor [411fd073] [ 0.337040] Brought up 6 CPUs [ 0.337044] SMP: Total of 6 processors activated. [ 0.337049] CPU features: detected feature: 32-bit EL0 Support [ 0.339267] CPU: All CPU(s) started at EL2 [ 0.339407] alternatives: patching kernel code [ 0.341754] devtmpfs: initialized [ 0.364770] Initilizing CustomIPI irq domain [ 0.364913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.364922] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.373422] pinctrl core: initialized pinctrl subsystem [ 0.373665] OS set in device tree is not L4T. [ 0.373829] regulator-dummy: no parameters [ 0.373967] Initializing plugin-manager [ 0.374022] Plugin module not found [ 0.374056] Plugin-manager status disabled [ 0.375178] NET: Registered protocol family 16 [ 0.376223] pstore: using zlib compression [ 0.376236] console [pstore-1] enabled [ 0.376239] pstore: Registered ramoops as persistent store backend [ 0.376243] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.389048] cpuidle: using governor menu [ 0.389975] bpmp: waiting for handshake [ 0.389978] bpmp: handshake completed [ 0.389997] bpmp: synchronizing channels [ 0.390004] bpmp: channels synchronized [ 0.390008] bpmp: mail init ok [ 0.391424] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.391430] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.391434] arm-smmu 12000000.iommu: stage 1 translation [ 0.391437] arm-smmu 12000000.iommu: stage 2 translation [ 0.391440] arm-smmu 12000000.iommu: nested translation [ 0.391447] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.391452] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.391456] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.391461] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.391465] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.393246] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.393259] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.396440] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.397453] Registering BPMP clocks... [ 0.397524] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.397996] Serial: AMBA PL011 UART driver [ 0.398905] tegra_powergate_init: DONE [ 0.398912] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.398917] DTB Build time: [ 0.400232] Tegra reboot handler registered. [ 0.401421] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.401487] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.401501] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.401503] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.401506] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.401662] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.401672] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.401943] iommu: Adding device 3460000.sdhci to group 0 [ 0.403096] iommu: Adding device 3160000.i2c to group 1 [ 0.403494] iommu: Adding device c240000.i2c to group 2 [ 0.403792] iommu: Adding device 3180000.i2c to group 3 [ 0.404081] iommu: Adding device 3190000.i2c to group 4 [ 0.404459] iommu: Adding device 31b0000.i2c to group 5 [ 0.404768] iommu: Adding device 31c0000.i2c to group 6 [ 0.405075] iommu: Adding device c250000.i2c to group 7 [ 0.405368] iommu: Adding device 31e0000.i2c to group 8 [ 0.406863] iommu: Adding device 3210000.spi to group 9 [ 0.407157] iommu: Adding device c260000.spi to group 10 [ 0.407814] iommu: Adding device 3100000.serial to group 11 [ 0.408106] iommu: Adding device 3110000.serial to group 12 [ 0.408403] iommu: Adding device 3130000.serial to group 13 [ 0.409605] iommu: Adding device 2490000.ether_qos to group 14 [ 0.409617] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.410458] iommu: Adding device b000000.rtcpu to group 15 [ 0.412172] iommu: Adding device 13e10000.host1x to group 16 [ 0.412466] iommu: Adding device 13e10000.host1x:ctx0 to group 17 [ 0.412743] iommu: Adding device 13e10000.host1x:ctx1 to group 18 [ 0.413073] iommu: Adding device 13e10000.host1x:ctx2 to group 19 [ 0.413354] iommu: Adding device 13e10000.host1x:ctx3 to group 20 [ 0.413646] iommu: Adding device 13e10000.host1x:ctx4 to group 21 [ 0.413924] iommu: Adding device 13e10000.host1x:ctx5 to group 22 [ 0.414200] iommu: Adding device 13e10000.host1x:ctx6 to group 23 [ 0.414488] iommu: Adding device 13e10000.host1x:ctx7 to group 24 [ 0.414909] iommu: Adding device 150c0000.nvcsi to group 25 [ 0.415467] iommu: Adding device 15700000.vi to group 26 [ 0.415767] iommu: Adding device 15600000.isp to group 27 [ 0.415973] iommu: Adding device 15200000.dc_common to group 28 [ 0.416014] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x800000) [ 0.416055] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.416504] iommu: Adding device 15200000.nvdisplay to group 29 [ 0.416820] iommu: Adding device 15210000.nvdisplay to group 30 [ 0.417147] iommu: Adding device 15340000.vic to group 31 [ 0.417347] iommu: Adding device 154c0000.nvenc to group 32 [ 0.417531] iommu: Adding device 15480000.nvdec to group 33 [ 0.417820] iommu: Adding device 15380000.nvjpg to group 34 [ 0.418023] iommu: Adding device 15500000.tsec to group 35 [ 0.418208] iommu: Adding device 15100000.tsecb to group 36 [ 0.419087] iommu: Adding device 15810000.se to group 37 [ 0.419274] iommu: Adding device 15820000.se to group 38 [ 0.419462] iommu: Adding device 15830000.se to group 39 [ 0.419652] iommu: Adding device 15840000.se to group 40 [ 0.420398] iommu: Adding device smmu_test to group 41 [ 0.421026] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.421037] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.421047] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ 0.421057] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ 0.421067] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ 0.421075] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.421085] mc-err: mcerr ops are set to t18x [ 0.421228] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.421978] iommu: Adding device 3530000.xhci to group 42 [ 0.421994] arm-smmu: forcing sodev map for 3530000.xhci [ 0.422391] iommu: Adding device 3550000.xudc to group 43 [ 0.422401] arm-smmu: forcing sodev map for 3550000.xudc [ 0.422902] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.422909] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.422914] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.423492] iommu: Adding device 17000000.gp10b to group 44 [ 0.424397] tegra-reset 5000000.clock: registered 193 resets. [ 0.426290] iommu: Adding device d000000.bpmp to group 45 [ 0.426496] bpmp: ping status is 0 [ 0.426574] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.428176] bpmp d000000.bpmp: probe ok [ 0.430711] iommu: Adding device 2600000.dma to group 46 [ 0.431506] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.431538] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.431583] GPIO line 408 (w-disable1) hogged as output/high [ 0.431619] GPIO line 410 (w-disable2) hogged as output/high [ 0.431777] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.435574] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.437170] iommu: Adding device 10003000.pcie-controller to group 47 [ 0.437185] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.437491] iommu: Adding device sound to group 48 [ 0.437803] iommu: Adding device 3510000.hda to group 49 [ 0.444281] iommu: Adding device c1a0000.aon to group 50 [ 0.444805] vdd-1v8-ap: 1800 mV [ 0.445039] vdd-ac-bat: 5000 mV [ 0.445225] vdd-3v3-disp-cvb: 3300 mV [ 0.445495] vdd-3v3-cvb: 3300 mV [ 0.445674] vdd-1v8-cvb: 1800 mV [ 0.445860] vdd-fan: 5000 mV [ 0.446054] vdd-hdmi-5v0: 5000 mV [ 0.446233] vdd_sys_en: 1200 mV [ 0.469445] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.471954] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.472145] SCSI subsystem initialized [ 0.472243] libata version 3.00 loaded. [ 0.472427] usbcore: registered new interface driver usbfs [ 0.472458] usbcore: registered new interface driver hub [ 0.472485] usbcore: registered new device driver usb [ 0.474811] random: fast init done [ 0.481734] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.484679] vddio-ddr: at 1125 mV [ 0.488548] avdd_dsi_csi: 1200 mV [ 0.492545] vdd-1v8: 1800 mV [ 0.496546] vdd-3v3-sys: 3300 mV [ 0.497428] spmic-ldo0: at 1800 mV [ 0.498059] spmic-ldo1: at 800 mV [ 0.500546] vddio-3v3: 3300 mV [ 0.501201] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.504547] vdd-rtc: at 800 mV [ 0.505229] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.508547] spmic-ldo6: at 800 mV [ 0.512546] vdd-pex-1v00: 1000 mV [ 0.513140] dvdd-pex: 1000 mV [ 0.515117] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.515246] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.515404] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.515580] max77620 4-003c: max77620 probe successful [ 0.515944] media: Linux media interface: v0.10 [ 0.515972] Linux video capture interface: v2.00 [ 0.518225] pps_core: LinuxPPS API ver. 1 registered [ 0.518228] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.518242] PTP clock support registered [ 0.518456] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.518634] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.518650] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.519800] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.519815] trusty trusty: selected api version: 3 (requested 3) [ 0.520613] Advanced Linux Sound Architecture Driver Initialized. [ 0.520943] Bluetooth: Core ver 2.22 [ 0.520968] NET: Registered protocol family 31 [ 0.520971] Bluetooth: HCI device and connection manager initialized [ 0.520978] Bluetooth: HCI socket layer initialized [ 0.520982] Bluetooth: L2CAP socket layer initialized [ 0.520996] Bluetooth: SCO socket layer initialized [ 0.521600] vdd-sys-bl: 3300 mV [ 0.523193] camchar: rtcpu character device driver loaded [ 0.523624] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.523695] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.524582] clocksource: Switched to clocksource arch_sys_counter [ 0.546845] VFS: Disk quotas dquot_6.6.0 [ 0.546924] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.547183] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.547624] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.547731] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.547735] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.547742] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.547746] nvmap_page_pool_init: Total RAM pages: 975393 [ 0.547749] nvmap_page_pool_init: nvmap page pool size: 121924 pages (476 MB) [ 0.548605] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.549112] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.550281] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.555794] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.555982] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.556306] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.556381] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.556516] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.556761] la/ptsa driver initialized. [ 0.556770] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.556772] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.557055] NET: Registered protocol family 2 [ 0.557701] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.557855] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.558152] TCP: Hash tables configured (established 32768 bind 32768) [ 0.558199] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.558258] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.558518] NET: Registered protocol family 1 [ 0.558834] RPC: Registered named UNIX socket transport module. [ 0.558838] RPC: Registered udp transport module. [ 0.558840] RPC: Registered tcp transport module. [ 0.558843] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.558849] PCI: CLS 0 bytes, default 64 [ 0.558956] Trying to unpack rootfs image as initramfs... [ 0.768270] Freeing initrd memory: 7068K [ 0.782935] host1x 13e10000.host1x: initialized [ 0.784252] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.786330] audit: initializing netlink subsys (disabled) [ 0.786356] audit: type=2000 audit(0.672:1): initialized [ 0.786745] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.793156] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.794107] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.794611] 9p: Installing v9fs 9p2000 file system support [ 0.796690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.796752] io scheduler noop registered [ 0.796956] io scheduler cfq registered (default) [ 0.799800] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.861637] iommu: Adding device aconnect@2a41000:adsp_audio to group 51 [ 0.882219] iommu: Adding device 2993000.adsp to group 52 [ 0.882788] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.887565] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.888440] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.889254] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.890048] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.891959] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.892679] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.892963] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.893180] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.893288] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.895131] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.895390] tsec 15500000.tsec: initialized [ 0.896278] tsec 15100000.tsecb: initialized [ 0.898424] nvdec 15480000.nvdec: initialized [ 0.902222] falcon 15340000.vic: initialized [ 0.903350] falcon 154c0000.nvenc: initialized [ 0.904409] falcon 15380000.nvjpg: initialized [ 0.906352] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.907875] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.909428] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.910968] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.912519] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.914052] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.915564] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.917150] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.919826] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.919834] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.919858] tegradccommon 15200000.dc_common: dma mapping done [ 0.920728] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.920769] generic_infoframe_type: 0x87 [ 0.920842] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.920861] tegradc 15200000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ 0.926501] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.926504] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.926507] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.926661] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.926667] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.927606] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.929561] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.929565] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.931714] tegradc 15200000.nvdisplay: probed [ 0.932657] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.933229] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.933255] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.933862] kfuse 3830000.kfuse: initialized [ 0.935096] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.938005] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.940106] console [ttyS0] disabled [ 0.940143] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 0.940179] console [ttyS0] enabled [ 0.941351] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 0.941530] serial-tegra 3130000.serial: RX in PIO mode [ 0.942111] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 0.943135] [drm] Initialized [ 0.943262] Console: switching to colour frame buffer device 240x67 [ 0.943350] tegradc 15200000.nvdisplay: fb registered [ 0.943513] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.943896] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.943943] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.945004] Parent Clock set for DC plld2 [ 0.950140] brd: module loaded [ 0.953524] loop: module loaded [ 0.953573] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.953645] tegra_profiler: auth: init [ 0.954257] THERMAL EST: found 3 subdevs [ 0.954262] THERMAL EST num_resources: 0 [ 0.954266] [THERMAL EST subdev 0] [ 0.954270] [THERMAL EST subdev 1] [ 0.954274] [THERMAL EST subdev 2] [ 0.954283] THERMAL EST: Found 2 profiles, default profile is quiet [ 0.954537] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.954540] THERMAL EST: thz register success. [ 0.954630] THERMAL EST: end of probe, return err: 0 [ 0.955222] sd: No Scsi addr parsed to reserve index [ 0.955251] hisi_sas: driver version v1.6 [ 0.959983] libphy: Fixed MDIO Bus: probed [ 0.960683] tun: Universal TUN/TAP device driver, 1.6 [ 0.960686] tun: (C) 1999-2004 Max Krasnyansky [ 0.961360] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.961363] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.961396] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.961398] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.961431] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.961433] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.961470] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 0.961472] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.003069] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.003504] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.003514] tegradc 15200000.nvdisplay: hdmi: BL set VIC 0 [ 1.003517] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.204620] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.206579] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.206990] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 5d 5e [ 1.207013] Using phyrst_lpmode = 1 from DT [ 1.207090] libphy: dwc_phy: probed [ 1.209213] PPP generic driver version 2.4.2 [ 1.209376] PPP BSD Compression module registered [ 1.209379] PPP Deflate Compression module registered [ 1.209393] PPP MPPE Compression module registered [ 1.209397] NET: Registered protocol family 24 [ 1.209465] usbcore: registered new interface driver r8152 [ 1.209523] usbcore: registered new interface driver asix [ 1.209579] usbcore: registered new interface driver ax88179_178a [ 1.209635] usbcore: registered new interface driver cdc_ether [ 1.209688] usbcore: registered new interface driver net1080 [ 1.209740] usbcore: registered new interface driver cdc_subset [ 1.209794] usbcore: registered new interface driver zaurus [ 1.209857] usbcore: registered new interface driver cdc_ncm [ 1.210024] VFIO - User Level meta-driver version: 0.3 [ 1.210799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.210808] ehci-pci: EHCI PCI platform driver [ 1.210835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.210840] ohci-pci: OHCI PCI platform driver [ 1.210863] ohci-platform: OHCI generic platform driver [ 1.214255] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.215635] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efe3a000 id [ 1.216334] usbcore: registered new interface driver uas [ 1.216372] usbcore: registered new interface driver usb-storage [ 1.216432] usbcore: registered new interface driver usbserial [ 1.217975] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.217998] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.218014] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.218744] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.218769] tegra-xusb 3530000.xhci: irq 68, io mem 0x03530000 [ 1.218912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.218917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.218921] usb usb1: Product: xHCI Host Controller [ 1.218924] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.218928] usb usb1: SerialNumber: 3530000.xhci [ 1.219248] hub 1-0:1.0: USB hub found [ 1.219279] hub 1-0:1.0: 4 ports detected [ 1.219385] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.219651] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.219659] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.219792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.219797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.219801] usb usb2: Product: xHCI Host Controller [ 1.219804] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.219807] usb usb2: SerialNumber: 3530000.xhci [ 1.220095] hub 2-0:1.0: USB hub found [ 1.220120] hub 2-0:1.0: 3 ports detected [ 1.220420] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 1.220428] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.220436] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.220587] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.220609] Wake76 for irq=199 [ 1.220612] Wake77 for irq=199 [ 1.220614] Wake78 for irq=199 [ 1.220616] Wake79 for irq=199 [ 1.220618] Wake80 for irq=199 [ 1.220620] Wake81 for irq=199 [ 1.220621] Wake82 for irq=199 [ 1.220650] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.220655] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.221055] mousedev: PS/2 mouse device common for all mice [ 1.221116] usbcore: registered new interface driver xpad [ 1.308507] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.309541] Wake73 for irq=42 [ 1.310789] rtc rtc1: alarm rtc device [ 1.310800] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.310824] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.310977] i2c /dev entries driver [ 1.312294] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.312564] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.312569] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.313045] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.320287] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 1.320820] usb usb2: usb_suspend_both: status 0 [ 1.336391] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.336437] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.344021] imx219 9-0010: board setup failed [ 1.348441] imx219: probe of 9-0010 failed with error -121 [ 1.348748] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.371958] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.372004] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.379635] imx219 10-0010: board setup failed [ 1.384122] imx219: probe of 10-0010 failed with error -121 [ 1.385040] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.389452] parse_throttle_dt_data: Num cap clks = 4 [ 1.389459] parse_throttle_dt_data: clk=mcpu type=1 [ 1.389462] parse_throttle_dt_data: clk=bcpu type=2 [ 1.389468] parse_throttle_dt_data: clk=gpu type=4 [ 1.389471] parse_throttle_dt_data: clk=emc type=3 [ 1.390113] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.390639] FAN dev name: pwm-fan [ 1.390691] FAN:gpio request success. [ 1.390699] FAN: can't find tach_gpio [ 1.390707] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.390731] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.390923] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.390929] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.391377] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.391382] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.391386] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.391390] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.391394] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.391398] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.391402] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.391405] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.391409] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.391413] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.391937] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.392926] device-mapper: uevent: version 1.0.3 [ 1.393285] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.393538] CPU EMC frequency mapping table: from device tree [ 1.395230] cpufreq: platform driver Initialization: pass [ 1.395814] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.395934] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.396745] sdhci: Secure Digital Host Controller Interface driver [ 1.396747] sdhci: Copyright(c) Pierre Ossman [ 1.396748] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.397711] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.399243] CMDQ: cmdq_platfm_init successful [ 1.400124] CQE: CMD_TIMING bit set for R1B DCMD [ 1.402384] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.440565] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.444552] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.482256] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.495871] mmc0: periodic cache flush enabled [ 1.495877] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.496148] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.496250] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.496345] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.496431] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.500798] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.552556] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 1.575815] usb 1-3: New USB device found, idVendor=2109, idProduct=2817 [ 1.575819] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.575821] usb 1-3: Product: USB2.0 Hub [ 1.575824] usb 1-3: Manufacturer: VIA Labs, Inc. [ 1.576514] hub 1-3:1.0: USB hub found [ 1.576692] hub 1-3:1.0: 4 ports detected [ 1.731249] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 1.983264] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 2.135785] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.137806] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 2.243958] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.243962] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.243965] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.243968] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.243971] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.243998] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400 [ 2.244108] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.244244] iommu: Adding device 0000:00:01.0 to group 53 [ 2.244251] arm-smmu: forcing sodev map for 0000:00:01.0 [ 2.244312] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.244455] pci 0000:01:00.0: [1b73:1100] type 00 class 0x0c0330 [ 2.244518] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 2.244577] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.244617] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 2.244824] pci 0000:01:00.0: supports D1 [ 2.244827] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 2.244989] iommu: Adding device 0000:01:00.0 to group 54 [ 2.244993] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.256609] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.256647] pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.256652] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x4010ffff 64bit] [ 2.256685] pci 0000:01:00.0: BAR 2: assigned [mem 0x40110000-0x40110fff 64bit] [ 2.256718] pci 0000:01:00.0: BAR 4: assigned [mem 0x40111000-0x40111fff 64bit] [ 2.256750] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.256757] pci 0000:00:01.0: bridge window [mem 0x40100000-0x401fffff] [ 2.256934] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.256936] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.256942] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 2.257012] aer 0000:00:01.0:pcie002: service driver aer loaded [ 2.257086] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 2.257261] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.257270] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 2.258834] xhci_hcd 0000:01:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x00000010 [ 2.258863] xhci_hcd 0000:01:00.0: irq 379, io mem 0x40100000 [ 2.259256] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.259259] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.259262] usb usb3: Product: xHCI Host Controller [ 2.259264] usb usb3: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.259267] usb usb3: SerialNumber: 0000:01:00.0 [ 2.259488] hub 3-0:1.0: USB hub found [ 2.259508] hub 3-0:1.0: 4 ports detected [ 2.259730] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.259737] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4 [ 2.259773] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.259814] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.259817] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.259820] usb usb4: Product: xHCI Host Controller [ 2.259822] usb usb4: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.259824] usb usb4: SerialNumber: 0000:01:00.0 [ 2.260020] hub 4-0:1.0: USB hub found [ 2.260040] hub 4-0:1.0: 4 ports detected [ 2.329909] usb 2-2: New USB device found, idVendor=2109, idProduct=0817 [ 2.329913] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.329916] usb 2-2: Product: USB3.0 Hub [ 2.329919] usb 2-2: Manufacturer: VIA Labs, Inc. [ 2.332485] hub 2-2:1.0: USB hub found [ 2.332700] hub 2-2:1.0: 4 ports detected [ 2.360721] usb usb4: usb_suspend_both: status 0 [ 2.360755] usb usb3: usb_suspend_both: status 0 [ 2.612567] usb 1-3.2: new low-speed USB device number 3 using tegra-xusb [ 2.636646] usb 1-3.2: New USB device found, idVendor=093a, idProduct=2510 [ 2.636649] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.636652] usb 1-3.2: Product: USB OPTICAL MOUSE [ 2.636654] usb 1-3.2: Manufacturer: PIXART [ 2.884892] usb 2-2.3: new SuperSpeed USB device number 3 using tegra-xusb [ 2.905437] usb 2-2.3: New USB device found, idVendor=0bda, idProduct=8153 [ 2.905440] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 2.905443] usb 2-2.3: Product: USB 10/100/1000 LAN [ 2.905445] usb 2-2.3: Manufacturer: Realtek [ 2.905447] usb 2-2.3: SerialNumber: 000001 [ 2.985159] usb 2-2.4: new SuperSpeed USB device number 4 using tegra-xusb [ 3.009019] usb 2-2.4: New USB device found, idVendor=05e3, idProduct=0749 [ 3.009023] usb 2-2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 3.009026] usb 2-2.4: Product: USB3.0 Card Reader [ 3.009028] usb 2-2.4: Manufacturer: Generic [ 3.009030] usb 2-2.4: SerialNumber: 000000001538 [ 3.013277] usb-storage 2-2.4:1.0: USB Mass Storage device detected [ 3.017430] scsi host0: usb-storage 2-2.4:1.0 [ 3.085139] usb 2-2.3: reset SuperSpeed USB device number 3 using tegra-xusb [ 3.153106] r8152 2-2.3:1.0 eth1: v2.09.00 (2017/08/21) [ 3.153109] r8152 2-2.3:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.050292] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 1538 PQ: 0 ANSI: 6 [ 4.253960] scsi 0:0:0:1: Direct-Access Generic MassStorageClass 1538 PQ: 0 ANSI: 6 [ 4.256690] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.258285] sd 0:0:0:1: [sdb] Attached SCSI removable disk [ 11.084569] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 11.090938] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 11.097563] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 11.102616] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 11.109227] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x1c [ 11.114712] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800040 [ 11.120455] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 11.125592] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 11.130847] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 11.137637] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 11.137641] Extcon AUX1(HDMI) enable [ 11.138010] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 11.138093] tegradc 15210000.nvdisplay: DT parsed successfully [ 11.138110] tegradc 15210000.nvdisplay: Display dc.ffffff800bb90000 registered with id=1 [ 11.138266] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 11.138270] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 11.144970] tegradc 15210000.nvdisplay: probed [ 11.145099] tegradc 15210000.nvdisplay: fb registered [ 11.156411] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 11.156733] Parent Clock set for DC plld3 [ 11.161366] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.170116] dp lt: state 0 (Reset), pending_lt_evt 1 [ 11.170118] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 11.170121] dp lt: state 0 (Reset), pending_lt_evt 0 [ 11.171617] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 11.171620] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.171865] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 11.171875] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 11.171881] dp lt: tx_pu: 0x22 [ 11.172563] dp lt: CR not done [ 11.172804] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.172807] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.172809] dp lt: CR retry [ 11.172812] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 11.172817] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.172832] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.172843] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.172849] dp lt: tx_pu: 0x33 [ 11.173554] dp lt: CR not done [ 11.173790] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.173791] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.173792] dp lt: CR retry [ 11.173794] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 11.173797] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.173810] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.173820] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.173825] dp lt: tx_pu: 0x33 [ 11.174537] dp lt: CR done [ 11.174540] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 11.174545] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 11.176525] dp lt: CE done [ 11.176527] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 11.176569] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 11.176571] Extcon AUX0(DP): enable [ 11.176572] dp_audio switch 1 [ 11.176604] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 11.176606] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 11.177312] tegra-se-nvhost 15810000.se: initialized [ 11.178374] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 11.178840] tegra-se-nvhost 15820000.se: initialized [ 11.179764] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 11.180210] tegra-se-nvhost 15830000.se: initialized [ 11.181006] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 11.181469] tegra-se-nvhost 15840000.se: initialized [ 11.182372] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 11.183114] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 11.183308] hidraw: raw HID events driver (C) Jiri Kosina [ 11.187641] input: PIXART USB OPTICAL MOUSE as /devices/3530000.xhci/usb1/1-3/1-3.2/1-3.2:1.0/0003:093A:2510.0001/input/input0 [ 11.187851] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-3530000.xhci-3.2/input0 [ 11.187892] usbcore: registered new interface driver usbhid [ 11.187894] usbhid: USB HID core driver [ 11.192629] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 11.194310] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 11.194512] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 11.194634] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 11.195333] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 11.195405] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 11.195454] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 11.195498] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 11.195593] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 11.195878] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (48) [ 11.195881] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 11.196333] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 11.197973] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 11.198368] tegra186-aondbg aondbg: aondbg driver probe() OK [ 11.198772] register_ari_mca_banks: Registered MCA ROC:IOB [ 11.199084] register_ari_mca_banks: Registered MCA ROC:CCE [ 11.199828] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.199831] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 11.199833] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 11.199878] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.199880] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 11.199882] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 11.199923] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.199925] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 11.199928] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 11.199969] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.199971] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 11.199973] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 11.200017] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200019] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 11.200021] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 11.200064] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200068] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 11.200070] tegra18-bridge 2100000.axip2p: bridge probed OK [ 11.200110] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200115] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 11.200117] tegra18-bridge 2110000.axip2p: bridge probed OK [ 11.200156] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200161] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 11.200163] tegra18-bridge 2120000.axip2p: bridge probed OK [ 11.200205] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200210] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 11.200212] tegra18-bridge 2130000.axip2p: bridge probed OK [ 11.200253] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200256] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 11.200258] tegra18-bridge 2140000.axip2p: bridge probed OK [ 11.200298] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200304] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 11.200305] tegra18-bridge 2150000.axip2p: bridge probed OK [ 11.200345] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200350] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 11.200352] tegra18-bridge 2160000.axip2p: bridge probed OK [ 11.200393] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200399] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 11.200401] tegra18-bridge 2170000.axip2p: bridge probed OK [ 11.200449] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200455] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 11.200457] tegra18-bridge 2180000.axip2p: bridge probed OK [ 11.200497] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 11.200502] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 11.200504] tegra18-bridge 2190000.axip2p: bridge probed OK [ 11.200670] **** A57 ECC: Enabled [ 11.200673] tegra18_a57_serr_init: on CPU 0 a A57 Core [ 11.200742] tegra18x_actmon d230000.actmon: in actmon_register()... [ 11.201097] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 11.201482] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 11.201595] denver_knobs_init:MTS_VERSION:53679346 [ 11.203237] nvpmodel: initialized successfully [ 11.203990] trusty-virtio trusty:virtio: initializing [ 11.204085] trusty_ipc virtio0: vring0: va(pa) ffffffc0efc0c000(0) qsz 32 notifyid 1 [ 11.204093] trusty_ipc virtio0: vring1: va(pa) ffffffc0efc0e000(0) qsz 32 notifyid 2 [ 11.204156] trusty-virtio trusty:virtio: initializing done [ 11.204246] trusty_ipc virtio0: is online [ 11.205200] usbcore: registered new interface driver snd-usb-audio [ 11.219773] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input1 [ 11.219903] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input2 [ 11.280557] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 11.280558] OPE platform probe [ 11.280564] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 11.280625] OPE platform probe successful [ 11.292575] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 11.302197] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.326793] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.327032] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.327270] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 11.327509] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.327747] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.327985] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.328222] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.328460] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.328699] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.328937] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.329175] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.329414] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.329652] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.329892] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.330130] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.330368] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.330606] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.330844] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.331085] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.331324] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.331564] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.331807] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.332034] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 11.332047] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.332106] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 11.332176] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 11.332241] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 11.332288] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.332311] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 11.332379] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 11.332445] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 11.332512] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 11.332527] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 11.332601] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 11.332678] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 11.332745] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 11.332789] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.332812] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 11.332879] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 11.332950] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 11.333017] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 11.333033] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.333086] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 11.333153] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 11.333218] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 11.333274] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.333286] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 11.333350] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 11.333530] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.333772] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.334012] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.334254] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.334494] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.334498] tegradc 15210000.nvdisplay: blank - powerdown [ 11.352495] u32 classifier [ 11.352497] Actions configured [ 11.352589] Initializing XFRM netlink socket [ 11.353124] NET: Registered protocol family 10 [ 11.353722] NET: Registered protocol family 17 [ 11.353730] NET: Registered protocol family 15 [ 11.353786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 11.353828] Bluetooth: RFCOMM socket layer initialized [ 11.353836] Bluetooth: RFCOMM ver 1.11 [ 11.353840] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 11.353842] Bluetooth: HIDP socket layer initialized [ 11.353856] 9pnet: Installing 9P2000 support [ 11.353889] Key type dns_resolver registered [ 11.354164] Registered cp15_barrier emulation handler [ 11.354187] Registered setend emulation handler [ 11.355022] registered taskstats version 1 [ 11.357480] isp 15600000.isp: initialized [ 11.360605] nvcsi 150c0000.nvcsi: initialized [ 11.361622] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 11.364184] Wake83 for irq=51 [ 11.364285] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 11.364426] input: gpio-keys as /devices/gpio-keys/input/input3 [ 11.365523] tegra-vi4 15700000.vi: initialized [ 11.366308] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 11.366388] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 11.376606] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 11.376608] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 11.376610] dp lt: state 0 (Reset), pending_lt_evt 0 [ 11.376615] dp lt: link training force disable [ 11.376617] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 11.397207] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:07:06 UTC (946688826) [ 11.397231] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 11.397232] Extcon AUX0(DP) disable [ 11.397233] dp_audio switch 0 [ 11.397954] mmcblk mmc0:0001: Card claimed for testing. [ 11.398393] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 11.398704] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.398713] tegradc 15210000.nvdisplay: unblank [ 11.403976] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 11.404144] Parent Clock set for DC plld3 [ 11.407466] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.415267] bpmp: mounted debugfs mirror [ 11.416072] bwmgr: missing cdev-type property [ 11.423418] random: crng init done [ 11.424349] ALSA device list: [ 11.424351] #0: tegra-hda at 0x3518000 irq 381 [ 11.424353] #1: tegra-snd-t186ref-mobile-rt565x [ 11.424568] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 11.424570] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 11.424572] dp lt: state 0 (Reset), pending_lt_evt 0 [ 11.426084] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 11.426087] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.426335] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 11.426345] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 11.426351] dp lt: tx_pu: 0x22 [ 11.427057] dp lt: CR not done [ 11.427292] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.427293] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.427294] dp lt: CR retry [ 11.427296] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 11.427298] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.427310] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.427320] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.427325] dp lt: tx_pu: 0x33 [ 11.428029] dp lt: CR not done [ 11.428265] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.428267] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.428267] dp lt: CR retry [ 11.428269] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 11.428272] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.428285] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.428295] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.428300] dp lt: tx_pu: 0x33 [ 11.429014] dp lt: CR done [ 11.429016] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 11.429020] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 11.429666] tegradc 15210000.nvdisplay: dp: irq event received [ 11.430985] dp lt: CE done [ 11.430987] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 11.431021] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 11.431022] Extcon AUX0(DP): enable [ 11.431023] dp_audio switch 1 [ 11.447672] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 11.447950] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.448197] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.448444] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 11.448691] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.448932] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.449172] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.449412] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.449652] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.449891] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.450132] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.450372] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.450611] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.450851] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.451091] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.451331] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.451571] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 11.451811] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.452051] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.452293] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.452534] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.452786] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.453034] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.453280] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.453526] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.453773] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 11.454019] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.454260] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.454500] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.454755] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 11.454995] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.455235] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.455475] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.455716] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 11.455719] tegradc 15210000.nvdisplay: blank - powerdown [ 11.497689] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 11.497691] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 11.497693] dp lt: state 0 (Reset), pending_lt_evt 0 [ 11.497697] dp lt: link training force disable [ 11.497698] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 11.518272] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 11.518274] Extcon AUX0(DP) disable [ 11.518275] dp_audio switch 0 [ 11.518686] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 11.518961] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.518968] tegradc 15210000.nvdisplay: unblank [ 11.519041] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 11.519231] Parent Clock set for DC plld3 [ 11.522565] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 11.531381] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 11.531382] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 11.531384] dp lt: state 0 (Reset), pending_lt_evt 0 [ 11.532890] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 11.532892] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.533138] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 11.533147] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 11.533152] dp lt: tx_pu: 0x22 [ 11.533854] dp lt: CR not done [ 11.534089] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.534090] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.534091] dp lt: CR retry [ 11.534092] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 11.534094] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.534107] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.534116] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.534121] dp lt: tx_pu: 0x33 [ 11.534821] dp lt: CR not done [ 11.535056] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.535057] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.535058] dp lt: CR retry [ 11.535059] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 11.535061] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 11.535073] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 11.535082] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 11.535087] dp lt: tx_pu: 0x33 [ 11.535788] dp lt: CR done [ 11.535789] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 11.535791] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 11.537758] dp lt: CE done [ 11.537760] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 11.537783] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 11.537784] Extcon AUX0(DP): enable [ 11.537785] dp_audio switch 1 [ 11.538455] tegradc 15210000.nvdisplay: dp: irq event received [ 11.554443] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 11.554477] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 11.554480] Extcon DP: HPD enabled [ 11.554489] hpd: Display connected, hpd_switch 1 [ 11.554492] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 11.556713] Freeing unused kernel memory: 8640K [ 11.578053] Root device found: mmcblk0p1 [ 11.579129] Found dev node: /dev/mmcblk0p1 [ 11.612567] tegradc 15210000.nvdisplay: dp: link stable, ignore irq event [ 11.748237] EXT4-fs (mmcblk0p1): 16 orphan inodes deleted [ 11.748240] EXT4-fs (mmcblk0p1): recovery complete [ 11.753164] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.755016] Rootfs mounted over mmcblk0p1 [ 11.770476] Switching from initrd to actual rootfs [ 11.859861] systemd[1]: System time before build time, advancing clock. [ 11.877373] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.886035] cgroup: cgroup2: unknown option "nsdelegate" [ 11.898619] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 11.899363] systemd[1]: Detected architecture arm64. [ 11.917183] systemd[1]: No hostname configured. [ 11.917195] systemd[1]: Set hostname to . [ 11.996021] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 11.996030] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 12.110867] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.112194] systemd[1]: Created slice User and Session Slice. [ 12.112225] systemd[1]: Reached target Swap. [ 12.112903] systemd[1]: Created slice System Slice. [ 12.157921] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 12.487683] systemd-journald[2217]: Received request to flush runtime journal from PID 1 [ 12.886073] using random self ethernet address [ 12.890660] using random host ethernet address [ 13.260661] FAN rising trip_level:1 cur_temp:46600 trip_temps[2]:60000 [ 13.402468] Mass Storage Function, version: 2009/09/11 [ 13.402474] LUN: removable file: (no medium) [ 13.425197] using random self ethernet address [ 13.433530] using random host ethernet address [ 13.468641] rndis0: HOST MAC 0a:d7:45:81:7c:94 [ 13.468867] rndis0: MAC 0a:d7:45:81:7c:95 [ 13.473546] usb0: HOST MAC 0a:d7:45:81:7c:96 [ 13.473735] usb0: MAC 0a:d7:45:81:7c:97 [ 13.473770] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 13.478892] l4tbr0: port 1(rndis0) entered blocking state [ 13.478896] l4tbr0: port 1(rndis0) entered disabled state [ 13.489415] device rndis0 entered promiscuous mode [ 13.502472] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 13.515248] l4tbr0: port 2(usb0) entered blocking state [ 13.515254] l4tbr0: port 2(usb0) entered disabled state [ 13.520115] device usb0 entered promiscuous mode [ 13.525248] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 13.680737] android_work: did not send uevent (0 0 (null)) [ 13.744784] android_work: sent uevent USB_STATE=CONNECTED [ 13.799880] android_work: sent uevent USB_STATE=DISCONNECTED [ 13.892659] android_work: sent uevent USB_STATE=CONNECTED [ 13.896817] configfs-gadget gadget: high-speed config #1: c [ 13.896854] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 13.896872] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 13.896888] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 13.896971] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 13.896988] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 13.897004] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 13.897038] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 13.897085] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 13.897286] android_work: sent uevent USB_STATE=CONFIGURED [ 13.897329] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 13.897345] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 13.901294] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 13.901313] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 13.901454] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 13.902372] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 13.902477] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 13.920779] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 13.920799] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 13.925676] bcpu-throttle-alert cooling device registered. [ 13.944072] mcpu-throttle-alert cooling device registered. [ 13.953083] gpu-throttle-alert cooling device registered. [ 13.990817] CPU1: shutdown [ 13.993596] psci: CPU1 killed (polled 0 ms) [ 14.058283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.075314] CPU2: shutdown [ 14.078382] psci: CPU2 killed (polled 0 ms) [ 14.336996] zram: Added device: zram0 [ 14.340362] zram: Added device: zram1 [ 14.341013] zram: Added device: zram2 [ 14.345095] zram: Added device: zram3 [ 14.373642] gpio tegra-gpio-aon wake51 for gpio=47(AA:7) [ 14.377093] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.401631] zram0: detected capacity change from 0 to 501411840 [ 14.430916] Adding 489656k swap on /dev/zram0. Priority:5 extents:1 across:489656k SS [ 14.437617] zram1: detected capacity change from 0 to 501411840 [ 14.458221] Adding 489656k swap on /dev/zram1. Priority:5 extents:1 across:489656k SS [ 14.464987] zram2: detected capacity change from 0 to 501411840 [ 14.486230] Adding 489656k swap on /dev/zram2. Priority:5 extents:1 across:489656k SS [ 14.490493] zram3: detected capacity change from 0 to 501411840 [ 14.503786] Adding 489656k swap on /dev/zram3. Priority:5 extents:1 across:489656k SS [ 15.130175] Bridge firewalling registered [ 15.138376] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.153639] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.169164] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.599622] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 15.599895] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.600170] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 15.600441] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.600712] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.600982] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.601249] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.601516] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.601784] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.602050] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.602312] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.602575] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.602846] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 15.603120] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.603391] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.603660] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 15.603930] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 15.604200] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 15.604470] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 15.604738] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 15.605011] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 15.605291] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 15.605560] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 15.605825] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 15.606090] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 15.664353] tegradc 15200000.nvdisplay: unblank [ 15.664363] tegradc 15210000.nvdisplay: unblank [ 15.747603] Netfilter messages via NETLINK v0.30. [ 15.749896] ctnetlink v0.93: registering with nfnetlink. [ 16.221116] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 16.995786] fuse init (API version 7.26) [ 19.718501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.718512] Bluetooth: BNEP socket layer initialized [ 20.362476] l4tbr0: port 2(usb0) entered blocking state [ 20.362487] l4tbr0: port 2(usb0) entered forwarding state [ 20.362610] l4tbr0: port 1(rndis0) entered blocking state [ 20.362616] l4tbr0: port 1(rndis0) entered forwarding state [ 20.365363] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 20.365386] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 21.324576] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 21.331178] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 21.340662] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 21.349384] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 21.358992] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x1c [ 21.364718] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800040 [ 21.371754] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 21.378181] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 21.383612] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 21.551486] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 21.552160] r8152 2-2.3:1.0 eth1: carrier on [ 23.519414] tegradc 15200000.nvdisplay: unblank [ 23.519424] tegradc 15210000.nvdisplay: unblank [ 23.584939] tegradc 15200000.nvdisplay: unblank [ 23.584949] tegradc 15210000.nvdisplay: unblank [ 31.564665] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 31.571280] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 31.579759] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 31.584944] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 31.591585] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x1c [ 31.597092] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800040 [ 31.602939] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 31.608094] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 31.613368] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50