nv@ubuntu:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (sibet@sibet-DLAP-320D-CFP3) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Sep 22 06:00:00 EDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@96088000 [ 0.000000] Found lut_mem2: 00002008@96085000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 nv-auto-config video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0x96088000 lut_mem2=0x2008@0x96085000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29672(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7269424K/8212468K available (15358K kernel code, 2956K rwdata, 6688K rodata, 8640K init, 612K bss, 189380K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001593] Console: colour dummy device 80x25 [ 0.001598] console [tty0] enabled [ 0.001602] bootconsole [uart8250] disabled [ 0.001609] kmemleak: Kernel memory leak detector disabled [ 0.001618] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001626] pid_max: default: 32768 minimum: 301 [ 0.001934] Security Framework initialized [ 0.002088] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002093] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002680] ftrace: allocating 47098 entries in 184 pages [ 0.125140] sched-energy: Sched-energy-costs installed from DT [ 0.125150] ASID allocator initialised with 65536 entries [ 0.164048] tegra-id: chipid=21817. [ 0.164054] tegra-id: opt_subrevision=1. [ 0.164071] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.164079] DTS File Name: /home/sibet/Music/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.164085] DTB Build time: Sep 22 2022 05:48:44 [ 0.210738] CPU1: Booted secondary processor [4e0f0030] [ 0.242156] CPU2: Booted secondary processor [4e0f0030] [ 0.273167] CPU3: Booted secondary processor [411fd073] [ 0.305130] CPU4: Booted secondary processor [411fd073] [ 0.337122] CPU5: Booted secondary processor [411fd073] [ 0.337174] Brought up 6 CPUs [ 0.337179] SMP: Total of 6 processors activated. [ 0.337183] CPU features: detected feature: 32-bit EL0 Support [ 0.339309] CPU: All CPU(s) started at EL2 [ 0.339372] alternatives: patching kernel code [ 0.342175] devtmpfs: initialized [ 0.381652] Initilizing CustomIPI irq domain [ 0.381805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.381814] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.390317] pinctrl core: initialized pinctrl subsystem [ 0.390555] OS set in device tree is not L4T. [ 0.390717] regulator-dummy: no parameters [ 0.390855] Initializing plugin-manager [ 0.390916] Plugin module not found [ 0.390955] Plugin-manager status disabled [ 0.392845] NET: Registered protocol family 16 [ 0.393853] pstore: using zlib compression [ 0.393866] console [pstore-1] enabled [ 0.393868] pstore: Registered ramoops as persistent store backend [ 0.393872] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.409179] cpuidle: using governor menu [ 0.410659] bpmp: waiting for handshake [ 0.410662] bpmp: handshake completed [ 0.410681] bpmp: synchronizing channels [ 0.410694] bpmp: channels synchronized [ 0.410697] bpmp: mail init ok [ 0.412758] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.412763] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.412767] arm-smmu 12000000.iommu: stage 1 translation [ 0.412770] arm-smmu 12000000.iommu: stage 2 translation [ 0.412773] arm-smmu 12000000.iommu: nested translation [ 0.412780] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.412785] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.412789] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.412793] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.412797] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.415057] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.415069] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417386] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.419482] Registering BPMP clocks... [ 0.419573] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.420525] Serial: AMBA PL011 UART driver [ 0.421730] tegra_powergate_init: DONE [ 0.421737] DTS File Name: /home/sibet/Music/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.421743] DTB Build time: Sep 22 2022 05:48:44 [ 0.423957] Tegra reboot handler registered. [ 0.425560] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.425625] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.425638] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.425640] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.425644] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.425800] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.425811] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.426145] iommu: Adding device 3460000.sdhci to group 0 [ 0.426847] iommu: Adding device 3400000.sdhci to group 1 [ 0.427916] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.427929] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.428380] iommu: Adding device 3160000.i2c to group 3 [ 0.428846] iommu: Adding device c240000.i2c to group 4 [ 0.429226] iommu: Adding device 3180000.i2c to group 5 [ 0.429588] iommu: Adding device 3190000.i2c to group 6 [ 0.430009] iommu: Adding device 31b0000.i2c to group 7 [ 0.430347] iommu: Adding device 31c0000.i2c to group 8 [ 0.430692] iommu: Adding device c250000.i2c to group 9 [ 0.431035] iommu: Adding device 31e0000.i2c to group 10 [ 0.432561] iommu: Adding device 3210000.spi to group 11 [ 0.432913] iommu: Adding device c260000.spi to group 12 [ 0.433279] iommu: Adding device 3240000.spi to group 13 [ 0.433984] iommu: Adding device 3100000.serial to group 14 [ 0.434338] iommu: Adding device 3110000.serial to group 15 [ 0.434671] iommu: Adding device c280000.serial to group 16 [ 0.435011] iommu: Adding device 3130000.serial to group 17 [ 0.436432] iommu: Adding device 2490000.ether_qos to group 18 [ 0.436443] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.437397] iommu: Adding device b000000.rtcpu to group 19 [ 0.439700] iommu: Adding device 13e10000.host1x to group 20 [ 0.440019] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.440342] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.440651] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.440961] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.441307] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.441621] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.441930] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.442253] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.442735] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.443374] iommu: Adding device 15700000.vi to group 30 [ 0.443736] iommu: Adding device 15600000.isp to group 31 [ 0.443952] iommu: Adding device 15200000.dc_common to group 32 [ 0.444069] platform 15200000.dc_common: OF IOVA linear map 0x96088000 size (0x800000) [ 0.444104] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x2008) [ 0.444625] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.444988] iommu: Adding device 15340000.vic to group 34 [ 0.445232] iommu: Adding device 154c0000.nvenc to group 35 [ 0.445451] iommu: Adding device 15480000.nvdec to group 36 [ 0.445799] iommu: Adding device 15380000.nvjpg to group 37 [ 0.446016] iommu: Adding device 15500000.tsec to group 38 [ 0.446230] iommu: Adding device 15100000.tsecb to group 39 [ 0.446923] iommu: Adding device 15810000.se to group 40 [ 0.447141] iommu: Adding device 15820000.se to group 41 [ 0.447349] iommu: Adding device 15830000.se to group 42 [ 0.447558] iommu: Adding device 15840000.se to group 43 [ 0.448437] iommu: Adding device smmu_test to group 44 [ 0.449051] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.449062] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.449072] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ 0.449081] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ 0.449091] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ 0.449098] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.449108] mc-err: mcerr ops are set to t18x [ 0.449273] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.450382] iommu: Adding device 3530000.xhci to group 45 [ 0.450394] arm-smmu: forcing sodev map for 3530000.xhci [ 0.450834] iommu: Adding device 3550000.xudc to group 46 [ 0.450845] arm-smmu: forcing sodev map for 3550000.xudc [ 0.451550] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.451556] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.451561] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.452195] iommu: Adding device 17000000.gp10b to group 47 [ 0.453283] tegra-reset 5000000.clock: registered 193 resets. [ 0.455566] iommu: Adding device d000000.bpmp to group 48 [ 0.455770] bpmp: ping status is 0 [ 0.455870] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.458392] bpmp d000000.bpmp: probe ok [ 0.461678] iommu: Adding device 2600000.dma to group 49 [ 0.462596] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.463099] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.463131] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.463162] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.463191] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.463222] GPIO line 424 (wifi-enable) hogged as output/high [ 0.463251] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.463280] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.463443] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.467126] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.467246] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.467388] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.469023] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.469041] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.469402] iommu: Adding device sound to group 51 [ 0.469762] iommu: Adding device 3510000.hda to group 52 [ 0.477318] iommu: Adding device c1a0000.aon to group 53 [ 0.477770] vdd-ac-bat: 5000 mV [ 0.479477] vdd-1v8-ap: 1800 mV [ 0.498257] random: fast init done [ 0.501564] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.504297] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.504497] SCSI subsystem initialized [ 0.504598] libata version 3.00 loaded. [ 0.504794] usbcore: registered new interface driver usbfs [ 0.504828] usbcore: registered new interface driver hub [ 0.504856] usbcore: registered new device driver usb [ 0.508165] GPIO line 241 (touch-rails) hogged as output/high [ 0.508582] GPIO line 242 (touch-rails) hogged as output/high [ 0.509327] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.510700] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.510834] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.520778] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.524847] vddio-ddr: at 1125 mV [ 0.528749] avdd_dsi_csi: 1200 mV [ 0.532691] vdd-1v8: 1800 mV [ 0.536691] vdd-3v3-sys: 3300 mV [ 0.537547] spmic-ldo0: at 1800 mV [ 0.538258] spmic-ldo1: at 800 mV [ 0.540694] vddio-3v3: 3300 mV [ 0.541413] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.544694] vdd-rtc: at 800 mV [ 0.545292] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.548692] spmic-ldo6: at 1500 mV [ 0.552692] vdd-pex-1v00: 1000 mV [ 0.553340] dvdd-pex: 1000 mV [ 0.555709] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.555863] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.556011] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.556188] max77620 4-003c: max77620 probe successful [ 0.556567] media: Linux media interface: v0.10 [ 0.556597] Linux video capture interface: v2.00 [ 0.559102] pps_core: LinuxPPS API ver. 1 registered [ 0.559105] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.559119] PTP clock support registered [ 0.559351] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.559555] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.559572] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.560920] trusty trusty: trusty version: Built: 02:25:36 Apr 17 2022 [ 0.560936] trusty trusty: selected api version: 3 (requested 3) [ 0.561866] Advanced Linux Sound Architecture Driver Initialized. [ 0.562186] Bluetooth: Core ver 2.22 [ 0.562214] NET: Registered protocol family 31 [ 0.562216] Bluetooth: HCI device and connection manager initialized [ 0.562223] Bluetooth: HCI socket layer initialized [ 0.562228] Bluetooth: L2CAP socket layer initialized [ 0.562244] Bluetooth: SCO socket layer initialized [ 0.562969] en-vdd-sd: 3300 mV [ 0.563754] en-vdd-cam: 1800 mV [ 0.568693] vdd-hdmi: 5000 mV [ 0.568995] vdd-usb0-5v: 5000 mV [ 0.569279] vdd-usb1-5v: 5000 mV [ 0.572693] en-vdd-ts-1v8: 1800 mV [ 0.576728] en-vdd-ts-hv-3v3: 3300 mV [ 0.577424] en-vdd-disp-3v3: 3300 mV [ 0.578104] en-mdm-pwr-3v7: 3700 mV [ 0.578780] en-vdd-disp-1v8: 1800 mV [ 0.579467] en-vdd-cam-hv-2v8: 2800 mV [ 0.580153] en-vdd-cam-1v2: 1200 mV [ 0.580868] vdd-fan: 5000 mV [ 0.581113] vdd-3v3: 3300 mV [ 0.582007] dis-vdd-1v2: 1200 mV [ 0.582262] en-vdd-vcm-2v8: 2800 mV [ 0.582982] vdd-usb2-5v: 5000 mV [ 0.583271] vdd-sys-bl: 3300 mV [ 0.584008] en-vdd-sys: 1200 mV [ 0.586273] camchar: rtcpu character device driver loaded [ 0.586800] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.588506] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.589475] clocksource: Switched to clocksource arch_sys_counter [ 0.611815] VFS: Disk quotas dquot_6.6.0 [ 0.611888] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.612133] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.612645] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.612752] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.612756] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.612763] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.612767] nvmap_page_pool_init: Total RAM pages: 2005772 [ 0.612771] nvmap_page_pool_init: nvmap page pool size: 250721 pages (979 MB) [ 0.612814] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.613283] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.615290] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.620975] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.621216] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.621688] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.621764] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.621874] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.621975] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.622130] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.622322] la/ptsa driver initialized. [ 0.622330] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.622333] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.622626] NET: Registered protocol family 2 [ 0.622691] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.625205] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.625537] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.626144] TCP: Hash tables configured (established 65536 bind 65536) [ 0.626193] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.626311] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.626703] NET: Registered protocol family 1 [ 0.627011] RPC: Registered named UNIX socket transport module. [ 0.627014] RPC: Registered udp transport module. [ 0.627016] RPC: Registered tcp transport module. [ 0.627018] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.627024] PCI: CLS 0 bytes, default 64 [ 0.627152] Trying to unpack rootfs image as initramfs... [ 0.835509] Freeing initrd memory: 7068K [ 0.851220] host1x 13e10000.host1x: initialized [ 0.852597] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.854666] audit: initializing netlink subsys (disabled) [ 0.854691] audit: type=2000 audit(0.744:1): initialized [ 0.855070] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.861462] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.862411] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.862913] 9p: Installing v9fs 9p2000 file system support [ 0.864956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.865016] io scheduler noop registered [ 0.865215] io scheduler cfq registered (default) [ 0.868482] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.974613] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 1.009259] iommu: Adding device 2993000.adsp to group 55 [ 1.010354] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.012773] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.015928] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.017072] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.018131] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.019183] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.021474] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 1.022438] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.022779] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 1.022900] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.023010] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.023015] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 1.025240] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 1.026579] tsec 15500000.tsec: initialized [ 1.027733] tsec 15100000.tsecb: initialized [ 1.031324] nvdec 15480000.nvdec: initialized [ 1.037546] falcon 15340000.vic: initialized [ 1.038887] falcon 154c0000.nvenc: initialized [ 1.040081] falcon 15380000.nvjpg: initialized [ 1.042070] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.043571] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.045039] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.046584] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.048063] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.049570] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.051035] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.052504] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.055744] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.055751] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.055778] tegradccommon 15200000.dc_common: dma mapping done [ 1.055975] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391 [ 1.056049] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.056284] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.056299] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.056323] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.056366] generic_infoframe_type: 0x87 [ 1.056442] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.056445] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.056447] tegra_cec 3960000.tegra_cec: probed [ 1.056470] tegradc 15210000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ 1.064737] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.064740] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.064743] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.064925] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.064930] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.066241] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.069048] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.069052] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.071748] tegradc 15210000.nvdisplay: probed [ 1.073042] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.073850] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.073879] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.074317] kfuse 3830000.kfuse: initialized [ 1.075717] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.078963] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.081402] console [ttyS0] disabled [ 1.081454] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.081489] console [ttyS0] enabled [ 1.082778] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.083306] Console: switching to colour frame buffer device 240x67 [ 1.083400] tegradc 15210000.nvdisplay: fb registered [ 1.083566] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.083714] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.083896] serial-tegra 3130000.serial: RX in PIO mode [ 1.084057] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.084152] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.084245] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.091453] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.092077] Parent Clock set for DC plld2 [ 1.093130] [drm] Initialized [ 1.100102] brd: module loaded [ 1.103511] loop: module loaded [ 1.103561] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.103634] tegra_profiler: auth: init [ 1.104006] nct1008_nct72 7-004c: starting parse dt [ 1.104110] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.104115] nct1008_nct72 7-004c: success parsing dt [ 1.104219] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.104596] THERMAL EST: found 3 subdevs [ 1.104600] THERMAL EST num_resources: 0 [ 1.104604] [THERMAL EST subdev 0] [ 1.104608] [THERMAL EST subdev 1] [ 1.104612] [THERMAL EST subdev 2] [ 1.104870] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.104872] THERMAL EST: thz register success. [ 1.104963] THERMAL EST: end of probe, return err: 0 [ 1.105628] sd: No Scsi addr parsed to reserve index [ 1.105646] hisi_sas: driver version v1.6 [ 1.109276] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.109283] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.110043] scsi host0: tegra_ahci [ 1.110435] scsi host1: tegra_ahci [ 1.110590] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.110593] ata2: DUMMY [ 1.115956] libphy: Fixed MDIO Bus: probed [ 1.116572] tun: Universal TUN/TAP device driver, 1.6 [ 1.116574] tun: (C) 1999-2004 Max Krasnyansky [ 1.117245] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.117248] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.117280] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.117282] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.117313] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.117316] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.117350] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.117352] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.129521] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.132112] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.132620] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d f 32 e8 [ 1.132651] Using phyrst_lpmode = 0 from DT [ 1.132730] libphy: dwc_phy: probed [ 1.133015] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.135236] PPP generic driver version 2.4.2 [ 1.135353] PPP BSD Compression module registered [ 1.135359] PPP Deflate Compression module registered [ 1.135374] PPP MPPE Compression module registered [ 1.135377] NET: Registered protocol family 24 [ 1.135419] usbcore: registered new interface driver r8152 [ 1.135452] usbcore: registered new interface driver asix [ 1.135480] usbcore: registered new interface driver ax88179_178a [ 1.135505] usbcore: registered new interface driver cdc_ether [ 1.135532] usbcore: registered new interface driver net1080 [ 1.135561] usbcore: registered new interface driver cdc_subset [ 1.135589] usbcore: registered new interface driver zaurus [ 1.135623] usbcore: registered new interface driver cdc_ncm [ 1.135727] VFIO - User Level meta-driver version: 0.3 [ 1.136573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.136585] ehci-pci: EHCI PCI platform driver [ 1.136617] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.136624] ohci-pci: OHCI PCI platform driver [ 1.136653] ohci-platform: OHCI generic platform driver [ 1.139686] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.140032] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.141650] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.143317] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb487000 id [ 1.144147] usbcore: registered new interface driver uas [ 1.144189] usbcore: registered new interface driver usb-storage [ 1.144256] usbcore: registered new interface driver usbserial [ 1.145464] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.146510] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.147034] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.147044] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.148990] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.150059] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.150077] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.151310] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.151566] mousedev: PS/2 mouse device common for all mice [ 1.151622] usbcore: registered new interface driver xpad [ 1.173793] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.173813] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.174170] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.174173] Extcon AUX1(HDMI) enable [ 1.174535] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.174565] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 1.174707] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.174712] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.174716] usb usb1: Product: xHCI Host Controller [ 1.174719] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.174722] usb usb1: SerialNumber: 3530000.xhci [ 1.175055] hub 1-0:1.0: USB hub found [ 1.175086] hub 1-0:1.0: 4 ports detected [ 1.175418] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.175426] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.175552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.175557] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.175560] usb usb2: Product: xHCI Host Controller [ 1.175563] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.175567] usb usb2: SerialNumber: 3530000.xhci [ 1.175849] hub 2-0:1.0: USB hub found [ 1.175874] hub 2-0:1.0: 3 ports detected [ 1.175926] nct1008_nct72 7-004c: initial LOC temp: 36000 [ 1.176232] nct1008_nct72 7-004c: initial EXT temp: 38000 [ 1.176339] Wake76 for irq=199 [ 1.176342] Wake77 for irq=199 [ 1.176344] Wake78 for irq=199 [ 1.176346] Wake79 for irq=199 [ 1.176347] Wake80 for irq=199 [ 1.176349] Wake81 for irq=199 [ 1.176351] Wake82 for irq=199 [ 1.176376] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.176381] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.176846] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.177137] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.177324] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.267923] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.269060] Wake73 for irq=42 [ 1.270315] rtc rtc1: alarm rtc device [ 1.270326] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.270343] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.270546] i2c /dev entries driver [ 1.272459] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.277544] parse_throttle_dt_data: Num cap clks = 4 [ 1.277549] parse_throttle_dt_data: clk=mcpu type=1 [ 1.277552] parse_throttle_dt_data: clk=bcpu type=2 [ 1.277559] parse_throttle_dt_data: clk=gpu type=4 [ 1.277562] parse_throttle_dt_data: clk=emc type=3 [ 1.278679] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.279307] FAN dev name: pwm-fan [ 1.279370] FAN:gpio request success. [ 1.279379] FAN: can't find tach_gpio [ 1.279396] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.279602] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.279607] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.280251] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.280255] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.280259] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.280263] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.280267] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.280271] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.280275] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.280279] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.280282] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.280286] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.280833] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.281827] device-mapper: uevent: version 1.0.3 [ 1.282146] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.282405] CPU EMC frequency mapping table: from device tree [ 1.286581] cpufreq: platform driver Initialization: pass [ 1.287170] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.287293] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.288073] sdhci: Secure Digital Host Controller Interface driver [ 1.288075] sdhci: Copyright(c) Pierre Ossman [ 1.288076] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.289258] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.291034] CMDQ: cmdq_platfm_init successful [ 1.292026] CQE: CMD_TIMING bit set for R1B DCMD [ 1.294465] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.297605] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.297657] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.298261] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.299927] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 1.303437] tegra-se-nvhost 15810000.se: initialized [ 1.304586] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.305178] tegra-se-nvhost 15820000.se: initialized [ 1.306134] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.306705] tegra-se-nvhost 15830000.se: initialized [ 1.307468] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.308010] tegra-se-nvhost 15840000.se: initialized [ 1.308874] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.309656] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.309797] hidraw: raw HID events driver (C) Jiri Kosina [ 1.310426] tegradc 15210000.nvdisplay: blank - powerdown [ 1.314383] usbcore: registered new interface driver usbhid [ 1.314385] usbhid: USB HID core driver [ 1.319880] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.321933] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.322166] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.322285] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.322484] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.329896] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.329968] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.330023] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.330069] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.330210] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.330552] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 1.330553] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.331068] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.332657] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.333068] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.333481] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.333527] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.333814] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.337440] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.337443] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337445] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.337447] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.337520] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337522] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.337524] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.337576] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337578] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.337579] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.337627] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337628] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.337630] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.337675] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337677] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.337678] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.337734] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337738] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.337740] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.337793] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337853] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.337855] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.337904] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337908] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.337910] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.337956] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.337960] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.337961] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.338006] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.338008] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.338010] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.338115] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.338119] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.338120] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.338170] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.338174] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.338176] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.338278] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.338283] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.338285] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.338332] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.338336] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.338338] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.338388] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.338391] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.338393] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.338504] **** A57 ECC: Enabled [ 1.338505] tegra18_a57_serr_init: on CPU 0 a A57 Core [ 1.338575] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.339693] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.340196] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.340341] denver_knobs_init:MTS_VERSION:55941701 [ 1.342671] nvpmodel: initialized successfully [ 1.345301] trusty-virtio trusty:virtio: initializing [ 1.345400] trusty_ipc virtio0: vring0: va(pa) ffffffc1e67e2000(0) qsz 32 notifyid 1 [ 1.345406] trusty_ipc virtio0: vring1: va(pa) ffffffc1e67f0000(0) qsz 32 notifyid 2 [ 1.345492] trusty-virtio trusty:virtio: initializing done [ 1.345610] trusty_ipc virtio0: is online [ 1.346821] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.346823] Extcon AUX1(HDMI) disable [ 1.347040] usbcore: registered new interface driver snd-usb-audio [ 1.349530] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.349577] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.361850] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.361994] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.369543] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.369841] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.370268] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.376466] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.391592] mmc0: periodic cache flush enabled [ 1.391598] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.394688] OPE platform probe [ 1.394753] OPE platform probe successful [ 1.395913] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 1.396009] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 1.396135] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 1.400270] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 1.404652] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.419723] tegradc 15210000.nvdisplay: unblank [ 1.420626] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.420709] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.420794] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.422083] Parent Clock set for DC plld2 [ 1.423867] ata1: SATA link down (SStatus 0 SControl 300) [ 1.429101] tegradc 15210000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 1.430636] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.442565] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.442641] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.442708] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.442774] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.442840] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.442909] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.442980] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.443046] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.443110] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.443177] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.443242] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.443309] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.443383] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.443447] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.443513] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.443578] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.443647] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.443722] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.443788] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.443856] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.445446] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.468747] u32 classifier [ 1.468749] Actions configured [ 1.468810] Initializing XFRM netlink socket [ 1.469326] NET: Registered protocol family 10 [ 1.469908] NET: Registered protocol family 17 [ 1.469916] NET: Registered protocol family 15 [ 1.469975] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.470015] Bluetooth: RFCOMM socket layer initialized [ 1.470023] Bluetooth: RFCOMM ver 1.11 [ 1.470026] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.470030] Bluetooth: HIDP socket layer initialized [ 1.470043] 9pnet: Installing 9P2000 support [ 1.470075] Key type dns_resolver registered [ 1.470600] Registered cp15_barrier emulation handler [ 1.470612] Registered setend emulation handler [ 1.472384] registered taskstats version 1 [ 1.475968] isp 15600000.isp: initialized [ 1.480595] nvcsi 150c0000.nvcsi: initialized [ 1.482415] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.484788] Wake83 for irq=51 [ 1.484860] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.484937] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.485011] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.485137] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.486525] tegra-vi4 15700000.vi: initialized [ 1.487409] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.505442] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.505601] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.505602] Extcon AUX1(HDMI) enable [ 1.514082] tegradc 15210000.nvdisplay: sync windows ret = 248 [ 1.518425] tegra_rtc c2a0000.rtc: setting system clock to 2022-09-23 03:13:28 UTC (1663902808) [ 1.519776] mmcblk mmc0:0001: Card claimed for testing. [ 1.536639] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.536643] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.536645] usb 1-2: Product: 4-Port USB 2.0 Hub [ 1.536647] usb 1-2: Manufacturer: Generic [ 1.537440] hub 1-2:1.0: USB hub found [ 1.537985] hub 1-2:1.0: 4 ports detected [ 1.549036] bpmp: mounted debugfs mirror [ 1.550241] bwmgr: missing cdev-type property [ 1.553916] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.553918] Extcon HDMI: HPD enabled [ 1.553968] tegradc 15210000.nvdisplay: hdmi: plugged [ 1.554591] ALSA device list: [ 1.554593] #0: tegra-hda at 0x3518000 irq 384 [ 1.554595] #1: tegra-snd-t186ref-mobile-rt565x [ 1.557076] Freeing unused kernel memory: 8640K [ 1.578315] Root device found: mmcblk0p1 [ 1.579393] Found dev node: /dev/mmcblk0p1 [ 1.581739] mmc1: hw tuning done ... [ 1.585932] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.598732] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.600516] Rootfs mounted over mmcblk0p1 [ 1.615248] Switching from initrd to actual rootfs [ 1.649992] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.679143] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.679150] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.679154] usb 2-1: Product: 4-Port USB 3.0 Hub [ 1.679158] usb 2-1: Manufacturer: Generic [ 1.683729] hub 2-1:1.0: USB hub found [ 1.684476] hub 2-1:1.0: 4 ports detected [ 1.716405] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.725393] cgroup: cgroup2: unknown option "nsdelegate" [ 1.740228] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.741003] systemd[1]: Detected architecture arm64. [ 1.759601] systemd[1]: Set hostname to . [ 1.825452] usb 1-2.1: new high-speed USB device number 3 using tegra-xusb [ 1.837877] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.837886] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.845814] usb 1-2.1: New USB device found, idVendor=1a40, idProduct=0101 [ 1.845819] usb 1-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.845822] usb 1-2.1: Product: USB2.0 HUB [ 1.846461] hub 1-2.1:1.0: USB hub found [ 1.846521] hub 1-2.1:1.0: 4 ports detected [ 1.855452] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.945756] random: systemd: uninitialized urandom read (16 bytes read) [ 1.947159] systemd[1]: Created slice User and Session Slice. [ 1.947279] random: systemd: uninitialized urandom read (16 bytes read) [ 1.947296] systemd[1]: Reached target User and Group Name Lookups. [ 1.947353] random: systemd: uninitialized urandom read (16 bytes read) [ 1.947452] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.947486] systemd[1]: Reached target Swap. [ 1.948168] systemd[1]: Created slice System Slice. [ 1.977254] usb 2-1.2: new SuperSpeed USB device number 3 using tegra-xusb [ 1.995076] usb 2-1.2: New USB device found, idVendor=0951, idProduct=1666 [ 1.995081] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.995084] usb 2-1.2: Product: DataTraveler 3.0 [ 1.995086] usb 2-1.2: Manufacturer: Kingston [ 1.995089] usb 2-1.2: SerialNumber: E0D55EA5359DE670C89B00B9 [ 1.995849] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 1.997725] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.005530] scsi host2: usb-storage 2-1.2:1.0 [ 2.033918] random: crng init done [ 2.033923] random: 7 urandom warning(s) missed due to ratelimiting [ 2.057479] tegra_cec 3960000.tegra_cec: physical address: 11:00. [ 2.137510] usb 1-2.1.1: new full-speed USB device number 4 using tegra-xusb [ 2.161607] usb 1-2.1.1: New USB device found, idVendor=0b95, idProduct=6804 [ 2.161613] usb 1-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.161616] usb 1-2.1.1: Product: AX68004 [ 2.161618] usb 1-2.1.1: Manufacturer: ASIX Electronics [ 2.161620] usb 1-2.1.1: SerialNumber: 00000001 [ 2.162474] hub 1-2.1.1:1.0: USB hub found [ 2.162876] hub 1-2.1.1:1.0: 7 ports detected [ 2.168576] systemd-journald[2308]: Received request to flush runtime journal from PID 1 [ 2.245479] usb 1-2.1.4: new full-speed USB device number 5 using tegra-xusb [ 2.259497] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.261476] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.266758] usb 1-2.1.4: New USB device found, idVendor=1a86, idProduct=7523 [ 2.266765] usb 1-2.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.266768] usb 1-2.1.4: Product: USB Serial [ 2.453482] usb 1-2.1.1.1: new full-speed USB device number 6 using tegra-xusb [ 2.486794] usb 1-2.1.1.1: New USB device found, idVendor=046d, idProduct=c534 [ 2.486801] usb 1-2.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.486803] usb 1-2.1.1.1: Product: USB Receiver [ 2.486806] usb 1-2.1.1.1: Manufacturer: Logitech [ 2.493491] input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1.1/1-2.1.1.1:1.0/0003:046D:C534.0001/input/input3 [ 2.554096] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3530000.xhci-2.1.1.1/input0 [ 2.558295] input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1.1/1-2.1.1.1:1.1/0003:046D:C534.0002/input/input4 [ 2.617807] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3530000.xhci-2.1.1.1/input1 [ 2.673491] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.875064] using random self ethernet address [ 2.888580] using random host ethernet address [ 3.020148] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 3.029555] sd 2:0:0:0: [sda] 121024512 512-byte logical blocks: (62.0 GB/57.7 GiB) [ 3.037727] sd 2:0:0:0: [sda] Write Protect is off [ 3.043671] sd 2:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 3.044056] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.093204] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.117890] sda: sda1 [ 3.120001] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 3.438864] Mass Storage Function, version: 2009/09/11 [ 3.438871] LUN: removable file: (no medium) [ 3.448870] using random self ethernet address [ 3.453501] using random host ethernet address [ 3.486524] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.487969] rndis0: HOST MAC c6:9c:4c:03:03:9c [ 3.488324] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.490697] rndis0: MAC c6:9c:4c:03:03:9d [ 3.505560] usb0: HOST MAC c6:9c:4c:03:03:9e [ 3.505630] usb0: MAC c6:9c:4c:03:03:9f [ 3.505651] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.510705] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.510726] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.510755] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.511985] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.511998] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.513642] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.513656] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.514891] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.520025] l4tbr0: port 1(rndis0) entered blocking state [ 3.520030] l4tbr0: port 1(rndis0) entered disabled state [ 3.520195] device rndis0 entered promiscuous mode [ 3.531409] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.544830] l4tbr0: port 2(usb0) entered blocking state [ 3.544835] l4tbr0: port 2(usb0) entered disabled state [ 3.544992] device usb0 entered promiscuous mode [ 3.555050] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.692402] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.692690] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.707923] CPU1: shutdown [ 3.710848] psci: CPU1 killed (polled 0 ms) [ 3.766281] usbcore: registered new interface driver ch341 [ 3.766324] usbserial: USB Serial support registered for ch341-uart [ 3.766368] ch341 1-2.1.4:1.0: ch341-uart converter detected [ 3.774236] usb 1-2.1.4: ch341-uart converter now attached to ttyUSB0 [ 3.802695] CPU2: shutdown [ 3.805622] psci: CPU2 killed (polled 0 ms) [ 3.806686] ov5693 2-0036: probing v4l2 sensor. [ 3.812182] ov5693 2-0036: parse_dt [ 3.817091] ov5693 2-0036: tegracam sensor driver:ov5693_v2.0.6 [ 3.817096] ov5693 2-0036: ov5693_board_setup [ 3.823606] ov5693 2-0036: ov5693_power_on: power on [ 3.907376] ov5693 2-0036: ov5693_board_setup finish. [ 3.915417] ov5693 2-0036: ov5693_board_setup error. [ 3.922140] ov5693 2-0036: ov5693_power_off: power off [ 3.932131] tegra-vi4 15700000.vi: subdev ov5693 2-0036 bound [ 3.932959] ov5693 2-0036: Detected OV5693 sensor [ 4.131527] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.147436] zram: Added device: zram0 [ 4.147883] zram: Added device: zram1 [ 4.148296] zram: Added device: zram2 [ 4.153942] zram: Added device: zram3 [ 4.173469] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.176247] zram0: detected capacity change from 0 to 1028968448 [ 4.181463] tegra_cec 3960000.tegra_cec: Sent res: -62. [ 4.188190] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.218274] gpio tegra-gpio wake18 for gpio=101(M:5) [ 4.220404] net eth0: get_configure_l3v4_filter --> [ 4.220850] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.254712] Adding 1004848k swap on /dev/zram0. Priority:5 extents:1 across:1004848k SS [ 4.260055] zram1: detected capacity change from 0 to 1028968448 [ 4.279209] Adding 1004848k swap on /dev/zram1. Priority:5 extents:1 across:1004848k SS [ 4.286158] zram2: detected capacity change from 0 to 1028968448 [ 4.312818] dhd_module_init in [ 4.312937] found wifi platform device bcmdhd_wlan [ 4.317834] wifi_platform_get_country_code_map: could not get country_code_map [ 4.317840] wifi_plat_dev_drv_probe:platform country code map is not available [ 4.317857] Power-up adapter 'DHD generic adapter' [ 4.317866] wifi_platform_set_power = 1 [ 4.324822] Adding 1004848k swap on /dev/zram2. Priority:5 extents:1 across:1004848k SS [ 4.328147] zram3: detected capacity change from 0 to 1028968448 [ 4.346794] Adding 1004848k swap on /dev/zram3. Priority:5 extents:1 across:1004848k SS [ 4.525476] wifi_platform_bus_enumerate device present 1 [ 4.542746] wifi_platform_bus_enumerate device present 0 [ 4.543546] F1 signature read @0x18000000=0x17214354 [ 4.553932] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 4.558737] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 4.558848] wifi_platform_get_mac_addr [ 4.581661] ids dhd_log_netlink_init [ 4.589003] wl_create_event_handler(): thread:wl_event_handler:16b1 started [ 4.589005] wl_event_handler : [ 4.589008] tsk Enter, tsk = 0xffffffc1b6ac1a90 [ 4.603962] dhd_attach(): thread:dhd_watchdog_thread:16b5 started [ 4.609397] dhd_attach(): thread:dhd_dpc:16b6 started [ 4.610008] dhd_attach(): thread:dhd_rxf:16c2 started [ 4.610017] dhd_deferred_work_init: work queue initialized [ 4.616513] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 4.616907] Register interface [wlan0] MAC: 48:b0:2d:0f:32:e6 [ 4.616912] dhd_prot_ioctl : bus is down. we have nothing to do [ 4.620327] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 64 [ 4.621371] wifi_platform_set_power = 0 [ 4.762781] Bridge firewalling registered [ 4.822770] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 5.257828] tegradc 15210000.nvdisplay: blank - powerdown [ 5.297577] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.297579] Extcon AUX1(HDMI) disable [ 5.319576] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 5.319670] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.320174] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.320578] tegradc 15210000.nvdisplay: unblank [ 5.321224] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.321319] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.321475] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 5.323023] Parent Clock set for DC plld2 [ 5.330434] tegradc 15210000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 5.331992] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.405684] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.405686] Extcon AUX1(HDMI) enable [ 5.411366] bcpu-throttle-alert cooling device registered. [ 5.411618] mcpu-throttle-alert cooling device registered. [ 5.411854] gpu-throttle-alert cooling device registered. [ 5.414581] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 5.415458] tegradc 15210000.nvdisplay: sync windows ret = 248 [ 5.486353] Netfilter messages via NETLINK v0.30. [ 5.493263] ctnetlink v0.93: registering with nfnetlink. [ 5.921933] tegradc 15210000.nvdisplay: blank - powerdown [ 5.966285] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.966287] Extcon AUX1(HDMI) disable [ 5.988091] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.004386] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 6.004472] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.004956] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.005090] tegradc 15210000.nvdisplay: unblank [ 6.009516] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.009625] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.029570] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 6.031650] Parent Clock set for DC plld2 [ 6.040060] tegradc 15210000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 6.041626] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 6.125726] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.125729] Extcon AUX1(HDMI) enable [ 6.145143] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 7.051462] ov5693 2-0036: ov5693_open: [ 7.098353] ov5693 2-0036: ov5693_power_on: power on [ 7.114412] tegradc 15210000.nvdisplay: unblank [ 7.116521] ov5693 2-0036: ov5693_power_off: power off [ 7.533099] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.533225] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 7.533236] wl_android_wifi_on in [ 7.533241] wifi_platform_set_power = 1 [ 7.960913] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 64 [ 7.961550] F1 signature read @0x18000000=0x17214354 [ 7.967267] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 7.967942] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.084520] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 8.131938] fuse init (API version 7.26) [ 8.150373] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 8.151972] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.152037] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.152039] Enabling wake69 [ 8.154043] wifi_platform_get_mac_addr [ 8.164464] Firmware up: op_mode=0x0005, MAC=48:b0:2d:0f:32:e6 [ 8.177545] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 8.177586] Skipping the clm download. len:0 memblk: (null) [ 8.182244] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 8.193395] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 8.203888] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 8.373618] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 8.373622] P2P interface registered [ 8.393770] WLC_E_IF: NO_IF set, event Ignored [ 8.413683] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.010841] [09-23 03:13:44.992] wl_cfg80211_connect: Connectting with a0:de:0f:93:c0:20 channel (13) ssid "hello", len (5) [ 18.083946] [09-23 03:13:45.65] wl_notify_connect_status: wl_bss_connect_done succeeded with a0:de:0f:93:c0:20 [ 18.086546] [09-23 03:13:45.68] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way [ 18.101934] wl_bss_connect_done : [ 18.101937] Report connect result - connection succeeded [ 18.101947] [09-23 03:13:45.83] wl_notify_connect_status: wl_bss_connect_done succeeded with a0:de:0f:93:c0:20 [ 18.103100] [09-23 03:13:45.85] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way [ 18.108681] [09-23 03:13:45.90] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way [ 18.108860] [09-23 03:13:45.90] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way [ 18.124198] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.149697] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23 [ 18.149732] dhd_inet6_work_handler: Adding host ip for NDO failed -23 [ 18.193920] ifidx:0 DHCP - REQUEST [TX] [ 18.230291] ifidx:0 DHCP - ACK [RX] [ 18.436118] tegradc 15210000.nvdisplay: blank - powerdown [ 18.493733] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 18.493735] Extcon AUX1(HDMI) disable [ 18.514107] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 18.514186] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 18.514666] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 18.654583] tegradc 15210000.nvdisplay: blank - powerdown [ 18.654593] tegradc 15210000.nvdisplay: unblank [ 18.655221] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 18.655313] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 18.655395] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 18.656849] Parent Clock set for DC plld2 [ 18.663790] tegradc 15210000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 18.665296] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 18.735457] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 18.735460] Extcon AUX1(HDMI) enable [ 18.735530] tegradc 15210000.nvdisplay: unblank [ 20.191231] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23 [ 20.191241] dhd_inet6_work_handler: Adding host ip for NDO failed -23 [ 20.191972] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23 [ 20.191981] dhd_inet6_work_handler: Adding host ip for NDO failed -23 [ 20.433612] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23 [ 20.433623] dhd_inet6_work_handler: Adding host ip for NDO failed -23 [ 21.709608] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.709619] Bluetooth: BNEP socket layer initialized [ 22.132982] tegradc 15210000.nvdisplay: unblank [ 24.005538] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 31.818199] spmic-ldo0: disabling [ 31.818522] spmic-ldo1: disabling [ 31.818741] en-vdd-sd: disabling [ 31.818752] en-vdd-cam: disabling [ 31.818764] vdd-usb0-5v: disabling [ 31.818774] vdd-usb1-5v: disabling [ 31.818787] en-vdd-disp-3v3: disabling [ 31.818797] en-mdm-pwr-3v7: disabling [ 31.818806] en-vdd-disp-1v8: disabling [ 31.818816] en-vdd-cam-hv-2v8: disabling [ 31.818826] en-vdd-cam-1v2: disabling [ 31.818835] vdd-fan: disabling [ 31.818845] vdd-3v3: disabling [ 31.818857] en-vdd-vcm-2v8: disabling [ 31.818869] vdd-sys-bl: disabling [ 31.818879] en-vdd-sys: disabling [ 281.449694] ov5693 2-0036: ov5693_power_on: power on [ 281.480414] ov5693 2-0036: set_mode 0 [ 281.506342] ov5693 2-0036: set_mode succeed [ 281.510566] ov5693 2-0036: starting stream [ 281.514832] ov5693 2-0036: v_flip [ 281.518182] ov5693 2-0036: h_mirror else [ 281.522119] ov5693 2-0036: ov5693_start_streaming: starting stream succeed [ 281.731804] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 281.738275] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 281.951951] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 281.958413] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 282.172030] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 282.178557] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 282.392015] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 282.398945] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 282.612077] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 282.618512] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 282.832128] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 282.838565] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 283.052146] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 283.058520] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 283.272211] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 283.278616] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 283.492243] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 283.498723] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 283.712417] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 283.718967] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 283.932446] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 283.938909] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 284.152478] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 284.158938] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel [ 284.372540] tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11 [ 284.379048] tegra-vi4 15700000.vi: tegra_channel_error_recovery: attempting to reset the capture channel