marek@marek-desktop:~$ dmesg --follow [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5434-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:59:22 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92ca9000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92ca9000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29760(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3560340K/4159488K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 124012K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001565] Console: colour dummy device 80x25 [ 0.001574] console [tty0] enabled [ 0.001580] bootconsole [uart8250] disabled [ 0.001600] kmemleak: Kernel memory leak detector disabled [ 0.001618] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001632] pid_max: default: 32768 minimum: 301 [ 0.002078] Security Framework initialized [ 0.002293] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002302] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003438] ftrace: allocating 47098 entries in 184 pages [ 0.172725] sched-energy: CPU device node has no sched-energy-costs [ 0.172761] ASID allocator initialised with 65536 entries [ 0.211926] tegra-id: chipid=22117. [ 0.211939] tegra-id: opt_subrevision=0. [ 0.211956] Tegra Speedo/IDDQ fuse revision 4 [ 0.211960] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211964] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.211971] Tegra: CPU Speedo Value 1983, SoC Speedo Value 1889, GPU Speedo Value 1992 [ 0.211975] Tegra: CPU IDDQ Value 1500, SoC IDDQ Value 1672, GPU IDDQ Value 2045 [ 0.211996] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212011] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.212019] DTB Build time: Feb 19 2022 09:01:46 [ 0.261107] CPU1: Booted secondary processor [411fd071] [ 0.293013] CPU2: Booted secondary processor [411fd071] [ 0.324983] CPU3: Booted secondary processor [411fd071] [ 0.325074] Brought up 4 CPUs [ 0.325082] SMP: Total of 4 processors activated. [ 0.325091] CPU features: detected feature: 32-bit EL0 Support [ 0.325357] CPU: All CPU(s) started at EL2 [ 0.325373] alternatives: patching kernel code [ 0.333699] devtmpfs: initialized [ 0.370662] Initilizing CustomIPI irq domain [ 0.371000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371022] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.382366] pinctrl core: initialized pinctrl subsystem [ 0.382991] OS set in device tree is not L4T. [ 0.383442] regulator-dummy: no parameters [ 0.383726] Initializing plugin-manager [ 0.383888] Plugin module not found [ 0.384083] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.384614] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.385372] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.385913] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.386115] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.386386] node /plugin-manager/fragement@9 match with board <3448-0000-300 [ 0.389984] NET: Registered protocol family 16 [ 0.391340] pstore: using zlib compression [ 0.391374] console [pstore-1] enabled [ 0.391378] pstore: Registered ramoops as persistent store backend [ 0.391384] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.401127] cpuidle: using governor menu [ 0.405035] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.406694] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.406716] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.409658] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.411931] Serial: AMBA PL011 UART driver [ 0.412454] tegra_powergate_init: DONE [ 0.412471] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.412480] DTB Build time: Feb 19 2022 09:01:46 [ 0.414301] Tegra reboot handler registered. [ 0.418872] iommu: Adding device tegra-carveouts to group 0 [ 0.419019] platform tegra-carveouts: domain=ffffffc0f94043d8 allocates as[0]=ffffffc0f942c0a8 [ 0.419384] iommu: Adding device smmu_test to group 1 [ 0.419432] platform smmu_test: domain=ffffffc0f9404618 allocates as[0]=ffffffc0f942c110 [ 0.420253] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.420310] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.420363] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.420371] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.420398] mc-err: mcerr ops are set to t21x [ 0.431292] iommu: Adding device 70090000.xusb to group 2 [ 0.431583] iommu: Adding device 70006000.serial to group 3 [ 0.431662] platform 70006000.serial: domain=ffffffc0f94a7558 allocates as[0]=ffffffc0f942c178 [ 0.432089] iommu: Adding device 70006040.serial to group 4 [ 0.432361] iommu: Adding device 70006200.serial to group 5 [ 0.432584] iommu: Adding device sound to group 6 [ 0.432633] platform sound: domain=ffffffc0f94a7a98 allocates as[0]=ffffffc0f942c1e0 [ 0.433247] iommu: Adding device 7000d400.spi to group 7 [ 0.433523] iommu: Adding device 7000d600.spi to group 8 [ 0.433810] iommu: Adding device 70410000.spi to group 9 [ 0.434131] iommu: Adding device 50000000.host1x to group 10 [ 0.434421] iommu: Adding device 54080000.vi to group 11 [ 0.434815] iommu: Adding device 54600000.isp to group 12 [ 0.435105] iommu: Adding device 54680000.isp to group 13 [ 0.435382] iommu: Adding device tegradc.0 to group 14 [ 0.435437] platform tegradc.0: domain=ffffffc0f94b29d8 allocates as[0]=ffffffc0f942c248 [ 0.439741] platform tegradc.0: IOVA linear map 0x0000000092ca9000(800000) [ 0.440134] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.440469] iommu: Adding device tegradc.1 to group 15 [ 0.440513] platform tegradc.1: domain=ffffffc0f94b2c18 allocates as[0]=ffffffc0f942c2b0 [ 0.444693] platform tegradc.1: IOVA linear map 0x0000000092ca9000(800000) [ 0.445098] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.445358] iommu: Adding device 54340000.vic to group 16 [ 0.445562] iommu: Adding device 544c0000.nvenc to group 17 [ 0.445759] iommu: Adding device 54500000.tsec to group 18 [ 0.445960] iommu: Adding device 54100000.tsecb to group 19 [ 0.446182] iommu: Adding device 54480000.nvdec to group 20 [ 0.446378] iommu: Adding device 54380000.nvjpg to group 21 [ 0.447447] iommu: Adding device 546c0000.i2c to group 22 [ 0.447782] iommu: Adding device 57000000.gpu to group 23 [ 0.447832] platform 57000000.gpu: domain=ffffffc0f94e2c18 allocates as[0]=ffffffc0f942c318 [ 0.447867] platform 57000000.gpu: domain=ffffffc0f94e2c18 allocates as[1]=ffffffc0f942c380 [ 0.447906] platform 57000000.gpu: domain=ffffffc0f94e2c18 allocates as[2]=ffffffc0f942c3e8 [ 0.447963] platform 57000000.gpu: domain=ffffffc0f94e2c18 allocates as[3]=ffffffc0f942c450 [ 0.448848] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.448859] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.448871] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.448876] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.448880] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.501182] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.501190] tegra-pmc: Clear bootloader IO dpd settings [ 0.501212] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.501280] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.501580] iommu: Adding device 70012000.se to group 24 [ 0.502153] iommu: Adding device 1003000.pcie to group 25 [ 0.502205] platform 1003000.pcie: domain=ffffffc0f954b498 allocates as[0]=ffffffc0f942c4b8 [ 0.502773] iommu: Adding device 7000c000.i2c to group 26 [ 0.503124] iommu: Adding device 7000c400.i2c to group 27 [ 0.503434] iommu: Adding device 7000c500.i2c to group 28 [ 0.503747] iommu: Adding device 7000c700.i2c to group 29 [ 0.504059] iommu: Adding device 7000d000.i2c to group 30 [ 0.504384] iommu: Adding device 7000d100.i2c to group 31 [ 0.504692] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.504753] platform sdhci-tegra.0: domain=ffffffc0f94e2f18 allocates as[0]=ffffffc0f942c520 [ 0.505811] iommu: Adding device 700d0000.xudc to group 33 [ 0.509670] vdd-ac-bat: 5000 mV [ 0.510102] vdd-5v0-sys: 5000 mV [ 0.510890] vdd-5v0-hdmi: 5000 mV [ 0.511314] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.511567] vdd-1v8-sys: 1800 mV [ 0.512002] vdd-fan: 5000 mV [ 0.512225] vdd-fan: supplied by vdd-5v0-sys [ 0.512512] vdd-usb-vbus: 5000 mV [ 0.512739] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.513119] vdd-usb-vbus2: 5000 mV [ 0.546156] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.548591] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.549763] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.550136] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.558386] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.558739] SCSI subsystem initialized [ 0.558961] libata version 3.00 loaded. [ 0.559278] usbcore: registered new interface driver usbfs [ 0.559330] usbcore: registered new interface driver hub [ 0.559374] usbcore: registered new device driver usb [ 0.563477] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.568345] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.568496] random: fast init done [ 0.569425] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.572233] vdd-ddr-1v1: 1150 mV [ 0.576248] vdd-pre-reg-1v35: 1350 mV [ 0.580235] vdd-1v8: 1800 mV [ 0.584231] avdd-sys-1v2: 1200 mV [ 0.588232] vdd-pex-1v0: 1050 mV [ 0.588863] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.589407] max77620-ldo3: at 3100 mV [ 0.592234] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.592776] max77620-ldo5: at 3100 mV [ 0.593354] max77620-ldo6: at 2800 mV [ 0.596234] avdd-1v05-pll: 1050 mV [ 0.600230] avdd-io-hdmi-dp: 1050 mV [ 0.602894] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.603180] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.603472] max77620 4-003c: max77620 probe successful [ 0.606356] media: Linux media interface: v0.10 [ 0.606418] Linux video capture interface: v2.00 [ 0.607400] pps_core: LinuxPPS API ver. 1 registered [ 0.607406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.607438] PTP clock support registered [ 0.610719] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.611687] Advanced Linux Sound Architecture Driver Initialized. [ 0.612331] Bluetooth: Core ver 2.22 [ 0.612380] NET: Registered protocol family 31 [ 0.612384] Bluetooth: HCI device and connection manager initialized [ 0.612398] Bluetooth: HCI socket layer initialized [ 0.612407] Bluetooth: L2CAP socket layer initialized [ 0.612441] Bluetooth: SCO socket layer initialized [ 0.614205] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.614220] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.614265] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.614278] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.617449] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.618596] vdd-3v3-sys: 3300 mV [ 0.618976] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.619021] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.621282] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.621711] vdd-3v3-sd: 3300 mV [ 0.622127] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.622863] avdd-io-edp-1v05: 1050 mV [ 0.623235] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.623424] vdd-usb-hub-en: 5000 mV [ 0.623770] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.624997] camchar: rtcpu character device driver loaded [ 0.626135] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.627524] clocksource: Switched to clocksource arch_sys_counter [ 0.668485] VFS: Disk quotas dquot_6.6.0 [ 0.668628] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.669130] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.669620] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.669639] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.669854] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.669859] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.669873] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.669903] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.669908] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.669924] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.669932] nvmap_page_pool_init: Total RAM pages: 1008869 [ 0.669937] nvmap_page_pool_init: nvmap page pool size: 126108 pages (492 MB) [ 0.670027] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.670572] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.671628] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.680071] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.680516] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.680880] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.681148] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.681326] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.681612] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.681617] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.682049] NET: Registered protocol family 2 [ 0.682178] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.684682] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.684901] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.685440] TCP: Hash tables configured (established 32768 bind 32768) [ 0.685603] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685683] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.686127] NET: Registered protocol family 1 [ 0.686703] RPC: Registered named UNIX socket transport module. [ 0.686707] RPC: Registered udp transport module. [ 0.686711] RPC: Registered tcp transport module. [ 0.686715] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.686729] PCI: CLS 0 bytes, default 64 [ 0.686974] Trying to unpack rootfs image as initramfs... [ 0.986698] Freeing initrd memory: 6988K [ 0.996613] host1x 50000000.host1x: initialized [ 0.998517] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.001861] audit: initializing netlink subsys (disabled) [ 1.001949] audit: type=2000 audit(0.851:1): initialized [ 1.002669] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.012674] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.014168] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.015019] 9p: Installing v9fs 9p2000 file system support [ 1.018273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.018389] io scheduler noop registered [ 1.018687] io scheduler cfq registered (default) [ 1.021482] gic 702f9000.agic: GIC IRQ controller registered [ 1.024871] iommu: Adding device 702ef000.adsp to group 34 [ 1.033755] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 1.033912] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.034580] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x89c8411 [ 1.034588] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.036335] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.036448] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.036547] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.036742] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.036835] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.036929] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.037017] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.037110] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.037195] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.037291] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.043500] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.045325] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.047275] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.048567] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.048910] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.050196] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.050408] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 1.050645] Adding domain tsec-pd to PM domain host1x-pd [ 1.052827] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.053853] tsec 54500000.tsec: initialized [ 1.055448] tsec 54100000.tsecb: initialized [ 1.056197] Adding domain nvdec-pd to PM domain host1x-pd [ 1.059454] nvdec 54480000.nvdec: initialized [ 1.060569] Adding domain vic03-pd to PM domain host1x-pd [ 1.060757] Adding domain msenc-pd to PM domain host1x-pd [ 1.060915] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.064657] falcon 54340000.vic: initialized [ 1.065903] falcon 544c0000.nvenc: initialized [ 1.067203] falcon 54380000.nvjpg: initialized [ 1.071645] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.071686] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.071720] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.071925] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.072006] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.072010] display board info: id 0x0, fab 0x0 [ 1.072016] tegra_cec 70015000.tegra_cec: probed [ 1.072078] generic_infoframe_type: 0x87 [ 1.072236] tegradc tegradc.0: DT parsed successfully [ 1.072287] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.072855] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.080446] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.080753] tegradc tegradc.0: probed [ 1.087378] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.088900] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.088908] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.089329] kfuse 7000fc00.kfuse: initialized [ 1.091021] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.092092] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.094979] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.094995] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.095001] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.095009] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.095016] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.095080] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.095283] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.095310] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.095330] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.095746] iommu: Adding device 0000:00:01.0 to group 36 [ 1.095896] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.096017] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.096021] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.096290] iommu: Adding device 0000:00:02.0 to group 37 [ 1.096463] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.096480] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.096712] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [ 1.096773] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.097063] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.097348] iommu: Adding device 0000:01:00.0 to group 38 [ 1.098169] vdd-gpu: applied init 1000000uV constraint [ 1.098180] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.098716] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.104369] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.104545] No Device Node present for smmu client: serial8250 !! [ 1.104559] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.104613] iommu: Adding device serial8250 to group 39 [ 1.107688] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.107739] console [ttyS0] disabled [ 1.107816] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.107905] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.107928] console [ttyS0] enabled [ 1.107938] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.107974] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.107998] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 1.108185] pci 0000:02:00.0: supports D1 D2 [ 1.108190] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.108451] iommu: Adding device 0000:02:00.0 to group 40 [ 1.108977] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.109300] serial-tegra 70006200.serial: RX in PIO mode [ 1.109391] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.110438] [drm] Initialized [ 1.112577] Console: switching to colour frame buffer device 240x67 [ 1.112702] tegradc tegradc.0: fb registered [ 1.119288] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.119338] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.119704] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.119803] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.119812] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff] [ 1.119820] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.119834] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.119863] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.119873] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.119886] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit] [ 1.119907] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit] [ 1.119927] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.119937] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.119941] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.119948] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 1.120656] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.120664] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.120672] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.120843] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.120955] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.120966] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.121193] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.121198] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.121205] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.121324] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.122515] brd: module loaded [ 1.127999] loop: module loaded [ 1.128104] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.128237] tegra_profiler: auth: init [ 1.129661] THERMAL EST: found 2 subdevs [ 1.129671] THERMAL EST num_resources: 0 [ 1.129678] [THERMAL EST subdev 0] [ 1.129686] [THERMAL EST subdev 1] [ 1.130174] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.130179] THERMAL EST: thz register success. [ 1.130344] THERMAL EST: end of probe, return err: 0 [ 1.131685] sd: No Scsi addr parsed to reserve index [ 1.131734] hisi_sas: driver version v1.6 [ 1.136880] tegra-qspi 70410000.spi: Prod settings list not found [ 1.138045] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.138054] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.141200] libphy: Fixed MDIO Bus: probed [ 1.141940] tun: Universal TUN/TAP device driver, 1.6 [ 1.141946] tun: (C) 1999-2004 Max Krasnyansky [ 1.143052] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.143059] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.143119] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.143123] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.143175] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.143179] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.143240] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.143243] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.144523] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.144555] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.147328] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.147333] Extcon AUX1(HDMI) enable [ 1.148390] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.148463] tegradc tegradc.1: No lt-data, using default setting [ 1.148492] tegradc tegradc.1: No hpd-gpio in DT [ 1.148528] tegradc tegradc.1: DT parsed successfully [ 1.148589] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1 [ 1.150132] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.158888] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.158992] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e5:e4:ca from device tree [ 1.159700] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.159773] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.160556] PPP generic driver version 2.4.2 [ 1.163455] PPP BSD Compression module registered [ 1.163462] PPP Deflate Compression module registered [ 1.163976] PPP MPPE Compression module registered [ 1.163989] NET: Registered protocol family 24 [ 1.164083] usbcore: registered new interface driver r8152 [ 1.164132] usbcore: registered new interface driver asix [ 1.164212] usbcore: registered new interface driver ax88179_178a [ 1.164256] usbcore: registered new interface driver cdc_ether [ 1.164292] usbcore: registered new interface driver net1080 [ 1.164325] usbcore: registered new interface driver cdc_subset [ 1.164359] usbcore: registered new interface driver zaurus [ 1.164417] usbcore: registered new interface driver cdc_ncm [ 1.164436] tegradc tegradc.1: probed [ 1.164666] VFIO - User Level meta-driver version: 0.3 [ 1.165381] tegradc tegradc.1: fb registered [ 1.166855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.166880] ehci-pci: EHCI PCI platform driver [ 1.166942] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.166958] ohci-pci: OHCI PCI platform driver [ 1.167006] ohci-platform: OHCI generic platform driver [ 1.168638] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.168647] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.168849] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.168867] tegradc tegradc.1: blank - powerdown [ 1.168888] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.168892] Extcon DP: HPD disabled [ 1.168896] hpd: hpd_switch 0 [ 1.168900] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.168909] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.168915] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.169847] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.170473] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.171668] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f96e0000 id [ 1.174076] usbcore: registered new interface driver uas [ 1.174135] usbcore: registered new interface driver usb-storage [ 1.174245] usbcore: registered new interface driver usbserial [ 1.174587] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.174655] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.174680] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.175446] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.175503] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.175737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.175743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.175749] usb usb1: Product: xHCI Host Controller [ 1.175754] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.175758] usb usb1: SerialNumber: 70090000.xusb [ 1.176442] hub 1-0:1.0: USB hub found [ 1.176490] hub 1-0:1.0: 5 ports detected [ 1.177155] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.177168] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.177259] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.177354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.177361] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.177366] usb usb2: Product: xHCI Host Controller [ 1.177370] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.177375] usb usb2: SerialNumber: 70090000.xusb [ 1.177849] hub 2-0:1.0: USB hub found [ 1.177884] hub 2-0:1.0: 4 ports detected [ 1.178714] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.178723] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.179943] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.181712] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.181726] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.182315] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.182609] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.182802] mousedev: PS/2 mouse device common for all mice [ 1.182924] usbcore: registered new interface driver xpad [ 1.185689] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.279084] tegradc tegradc.0: blank - powerdown [ 1.279655] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.279754] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.279969] usb usb2: usb_suspend_both: status 0 [ 1.312154] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.314278] rtc rtc1: alarm rtc device [ 1.314292] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.314318] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.314692] i2c /dev entries driver [ 1.316420] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.335373] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.335376] Extcon AUX1(HDMI) disable [ 1.339681] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.339748] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.339817] imx219 6-0010: board setup failed [ 1.339868] imx219: probe of 6-0010 failed with error -121 [ 1.340776] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.342762] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.342766] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.343071] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.343083] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.343090] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.343220] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.343229] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.343235] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.343384] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.343392] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.343397] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.343600] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.344168] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.344214] tegra_aotag tegra-aotag: Invalid temp readout [ 1.344234] tegra_aotag tegra-aotag: Invalid temp readout [ 1.344250] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.344258] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.345057] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.345071] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.345218] tegra_aotag tegra-aotag: Invalid temp readout [ 1.345240] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.345606] parse_throttle_dt_data: Num cap clks = 6 [ 1.345610] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.345616] parse_throttle_dt_data: clk=gpu type=4 [ 1.345638] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.345661] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.345684] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.345687] parse_throttle_dt_data: clk=emc type=3 [ 1.346211] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.346338] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.346487] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.347189] FAN dev name: pwm-fan [ 1.347233] FAN:gpio request success. [ 1.347275] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.347578] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.347697] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.347704] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.347777] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.347782] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.347786] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.347791] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.347795] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.347798] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.347802] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.347806] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.347810] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.347814] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.350207] device-mapper: uevent: version 1.0.3 [ 1.350599] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.353235] tegra210-cpufreq cpufreq: probe()...completed [ 1.354001] sdhci: Secure Digital Host Controller Interface driver [ 1.354003] sdhci: Copyright(c) Pierre Ossman [ 1.354004] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.354516] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.354900] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.355020] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.359402] tegra-se 70012000.se: tegra_se_probe: complete [ 1.359960] hidraw: raw HID events driver (C) Jiri Kosina [ 1.361104] usbcore: registered new interface driver usbhid [ 1.361106] usbhid: USB HID core driver [ 1.363164] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.363492] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.365528] nvpmodel: initialized successfully [ 1.366513] usbcore: registered new interface driver snd-usb-audio [ 1.366573] No Device Node present for smmu client: snd-soc-dummy !! [ 1.366578] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.366596] iommu: Adding device snd-soc-dummy to group 41 [ 1.366963] tegradc tegradc.0: unblank [ 1.379797] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.379848] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.380677] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.380862] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.390890] OPE platform probe [ 1.390978] OPE platform probe successful [ 1.391233] OPE platform probe [ 1.391303] OPE platform probe successful [ 1.399867] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.415078] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.415199] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.415321] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.415439] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.415590] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.415648] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.415650] Extcon AUX1(HDMI) enable [ 1.419670] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.419797] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.419920] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.420046] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.420170] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.431048] tegradc tegradc.0: sync windows ret = 247 [ 1.432802] u32 classifier [ 1.432804] Actions configured [ 1.432873] Initializing XFRM netlink socket [ 1.433582] NET: Registered protocol family 10 [ 1.434307] NET: Registered protocol family 17 [ 1.434318] NET: Registered protocol family 15 [ 1.434391] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.434433] Bluetooth: RFCOMM socket layer initialized [ 1.434442] Bluetooth: RFCOMM ver 1.11 [ 1.434447] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.434451] Bluetooth: HIDP socket layer initialized [ 1.434469] 9pnet: Installing 9P2000 support [ 1.434505] Key type dns_resolver registered [ 1.434889] Registered cp15_barrier emulation handler [ 1.434895] Registered setend emulation handler [ 1.436004] registered taskstats version 1 [ 1.436628] Adding domain ve2-pd to PM domain host1x-pd [ 1.436865] Adding domain ve-pd to PM domain host1x-pd [ 1.438840] isp 54600000.isp: initialized [ 1.439802] isp 54680000.isp: initialized [ 1.450167] last reset is due to power on reset [ 1.450170] KERNEL: PMC reset status reg: 0x0 [ 1.450230] BL: PMC reset status reg: 0x0 [ 1.450232] BL: PMIC poweroff Event Recorder: 0x10 [ 1.451900] clk_cbus_recalc_rate: no gbus parent [ 1.451904] clk_cbus_round_rate: no gbus parent [ 1.451906] clk_cbus_round_rate: no gbus parent [ 1.451914] clk_cbus_recalc_rate: no gbus parent [ 1.452020] clk_cbus_recalc_rate: no gbus parent [ 1.452022] clk_cbus_round_rate: no gbus parent [ 1.452024] clk_cbus_round_rate: no gbus parent [ 1.452027] clk_cbus_recalc_rate: no gbus parent [ 1.452712] tegra_dvfs: GPU-cap: registered [ 1.452770] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.452772] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.452774] tegra dvfs: vdd-gpu: nominal 1088mV, offset 708000uV, step 10000uV, scaling enabled [ 1.454171] tegra_dvfs: vdd-gpu-vts: registered [ 1.454878] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.455554] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.456155] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.467659] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.467662] Extcon HDMI: HPD enabled [ 1.467680] tegradc tegradc.0: hdmi: plugged [ 1.488710] tegra_rtc 7000e000.rtc: setting system clock to 2022-08-15 08:24:41 UTC (1660551881) [ 1.489696] vi 54080000.vi: vi_probe: ++ [ 1.492704] vi 54080000.vi: initialized [ 1.494694] vi 54080000.vi: subdev nvcsi--1 bound [ 1.496187] Disable partitions left on by BL [ 1.496190] disb [ 1.496238] bwmgr: missing cdev-type property [ 1.496333] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.496340] DRAM derating cdev registered. [ 1.497221] ALSA device list: [ 1.497225] #0: tegra-hda at 0x70038000 irq 83 [ 1.497227] #1: tegra-snd-t210ref-mobile-rt565x [ 1.500579] Freeing unused kernel memory: 8640K [ 1.503539] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.524912] Root device found: mmcblk0p1 [ 1.539482] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.539488] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.539491] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.539494] usb 1-2: Manufacturer: Generic [ 1.541691] hub 1-2:1.0: USB hub found [ 1.542785] hub 1-2:1.0: 4 ports detected [ 1.595076] mmc0: hw tuning done ... [ 1.595110] mmc0: new ultra high speed SDR104 SDXC card at address 0001 [ 1.595489] mmcblk0: mmc0:0001 EC2QT 59.6 GiB [ 1.599531] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.648507] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.684204] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.684208] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.684211] usb 2-1: Product: 4-Port USB 3.1 Hub [ 1.684214] usb 2-1: Manufacturer: Generic [ 1.688507] hub 2-1:1.0: USB hub found [ 1.689939] hub 2-1:1.0: 4 ports detected [ 1.730003] Found dev node: /dev/mmcblk0p1 [ 1.799578] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 1.821578] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 1.821583] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.855530] usb 2-1: usb_suspend_both: status 0 [ 1.855681] usb usb2: usb_suspend_both: status 0 [ 1.899570] usb 1-2.2: new full-speed USB device number 4 using tegra-xusb [ 1.924513] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b [ 1.924517] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.924519] usb 1-2.2: Product: USB Receiver [ 1.924522] usb 1-2.2: Manufacturer: Logitech [ 2.099539] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.164113] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.164117] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.737720] EXT4-fs (mmcblk0p1): 28 orphan inodes deleted [ 2.737724] EXT4-fs (mmcblk0p1): recovery complete [ 2.847340] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.849266] Rootfs mounted over mmcblk0p1 [ 2.869401] Switching from initrd to actual rootfs [ 3.084864] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.097824] cgroup: cgroup2: unknown option "nsdelegate" [ 3.121486] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.122256] systemd[1]: Detected architecture arm64. [ 3.148772] systemd[1]: Set hostname to . [ 3.268529] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.268537] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.412817] random: systemd: uninitialized urandom read (16 bytes read) [ 3.413056] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.413175] random: systemd: uninitialized urandom read (16 bytes read) [ 3.414744] systemd[1]: Created slice System Slice. [ 3.414816] random: systemd: uninitialized urandom read (16 bytes read) [ 3.415010] systemd[1]: Listening on udev Control Socket. [ 3.415156] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.416056] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.499373] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.612071] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.702528] systemd-journald[1980]: Received request to flush runtime journal from PID 1 [ 4.704568] random: crng init done [ 4.708002] random: 7 urandom warning(s) missed due to ratelimiting [ 5.218939] using random self ethernet address [ 5.223464] using random host ethernet address [ 5.507603] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.507624] cpu-throttle-alert cooling device registered. [ 5.507764] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.507781] gpu-throttle-alert cooling device registered. [ 5.507973] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.508528] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.508551] hot-surface-alert cooling device registered. [ 5.605089] Intel(R) Wireless WiFi driver for Linux [ 5.605093] Copyright(c) 2003- 2015 Intel Corporation [ 5.605319] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 5.646507] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 5.656221] iwlwifi 0000:01:00.0: Falling back to user helper [ 5.928969] usbcore: registered new interface driver btusb [ 5.940093] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 5.941106] Bluetooth: hci0: Device revision is 16 [ 5.941111] Bluetooth: hci0: Secure boot is enabled [ 5.941113] Bluetooth: hci0: OTP lock is enabled [ 5.941116] Bluetooth: hci0: API lock is enabled [ 5.941118] Bluetooth: hci0: Debug lock is disabled [ 5.941121] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.962139] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 6.040425] Mass Storage Function, version: 2009/09/11 [ 6.040432] LUN: removable file: (no medium) [ 6.070996] using random self ethernet address [ 6.085418] using random host ethernet address [ 6.330978] rndis0: HOST MAC 2a:6c:a1:f2:76:1c [ 6.331579] rndis0: MAC 2a:6c:a1:f2:76:1d [ 6.336814] usb0: HOST MAC 2a:6c:a1:f2:76:1e [ 6.336842] usb0: MAC 2a:6c:a1:f2:76:1f [ 6.336864] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 6.338624] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 6.338641] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.338831] tegra-xudc-new 700d0000.xudc: entering ELPG [ 6.339062] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 6.339157] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 6.339695] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 6.339706] tegra-xudc-new 700d0000.xudc: entering ELPG [ 6.340016] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 6.345302] l4tbr0: port 1(rndis0) entered blocking state [ 6.345305] l4tbr0: port 1(rndis0) entered disabled state [ 6.347296] device rndis0 entered promiscuous mode [ 6.360848] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.376803] l4tbr0: port 2(usb0) entered blocking state [ 6.376834] l4tbr0: port 2(usb0) entered disabled state [ 6.377534] device usb0 entered promiscuous mode [ 6.393771] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.452592] logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.2/input2 [ 6.913921] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.919990] eth0: 0xffffff800a40c000, 00:04:4b:e5:e4:ca, IRQ 406 [ 6.973101] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.425998] zram: Added device: zram0 [ 7.430132] zram: Added device: zram1 [ 7.436751] zram: Added device: zram2 [ 7.440901] zram: Added device: zram3 [ 7.469351] Bluetooth: hci0: Waiting for firmware download to complete [ 7.470050] Bluetooth: hci0: Firmware loaded in 1505057 usecs [ 7.470179] Bluetooth: hci0: Waiting for device to boot [ 7.474570] zram0: detected capacity change from 0 to 518541312 [ 7.487052] Bluetooth: hci0: Device booted in 16526 usecs [ 7.496659] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 7.506044] iwlwifi 0000:01:00.0: Falling back to user helper [ 7.518168] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 7.521058] Bluetooth: hci0: Applying Intel DDC parameters completed [ 7.654146] Adding 506384k swap on /dev/zram0. Priority:5 extents:1 across:506384k SS [ 7.658553] zram1: detected capacity change from 0 to 518541312 [ 7.669462] Adding 506384k swap on /dev/zram1. Priority:5 extents:1 across:506384k SS [ 7.673009] zram2: detected capacity change from 0 to 518541312 [ 7.688380] Adding 506384k swap on /dev/zram2. Priority:5 extents:1 across:506384k SS [ 7.693657] zram3: detected capacity change from 0 to 518541312 [ 7.712043] Adding 506384k swap on /dev/zram3. Priority:5 extents:1 across:506384k SS [ 7.853853] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input2 [ 7.858357] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.2:1 [ 7.951041] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 7.962284] iwlwifi 0000:01:00.0: Falling back to user helper [ 7.989806] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 8.002631] iwlwifi 0000:01:00.0: Falling back to user helper [ 8.041664] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 8.294976] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 8.296844] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.297462] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.414256] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 8.415312] thermal thermal_zone6: failed to read out thermal zone (-5) [ 8.422361] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi_1 [ 8.425143] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.425153] Bluetooth: BNEP socket layer initialized [ 8.539599] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.541900] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.542191] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.659641] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.659956] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.718672] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.016437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.301418] Bridge firewalling registered [ 9.342563] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.686940] Netfilter messages via NETLINK v0.30. [ 9.689926] ctnetlink v0.93: registering with nfnetlink. [ 9.968032] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 10.336752] tegradc tegradc.0: unblank [ 10.337006] tegradc tegradc.1: blank - powerdown [ 11.059577] r8168: eth0: link up [ 11.059619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.510365] wlan0: authenticate with 8c:6a:8d:18:19:13 [ 12.520117] wlan0: send auth to 8c:6a:8d:18:19:13 (try 1/3) [ 12.526682] wlan0: authenticated [ 12.535548] wlan0: associate with 8c:6a:8d:18:19:13 (try 1/3) [ 12.536792] wlan0: RX AssocResp from 8c:6a:8d:18:19:13 (capab=0x1011 status=0 aid=1) [ 12.538872] wlan0: associated [ 12.566319] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 12.607214] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 8c:6a:8d:18:19:13 [ 13.527171] fuse init (API version 7.26) [ 14.748959] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.386247] tegradc tegradc.0: unblank [ 18.386565] tegradc tegradc.1: blank - powerdown [ 31.859712] vdd-fan: disabling [ 31.859716] vdd-usb-vbus: disabling [ 31.859719] vdd-usb-vbus2: disabling [ 31.859728] avdd-io-edp-1v05: disabling