############################################################################### # L4T BSP Information: # R28 (release), REVISION: 2.0, GCID: 10567845, BOARD: t210ref, EABI: aarch64, # DATE: Fri Mar 2 04:58:16 UTC 2018 ############################################################################### # Target Board Information: # Name: jetson-tx1, Board Family: t210ref, SoC: Tegra 210, # OpMode: production, Boot Authentication: , ############################################################################### copying bctfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/BCT/P2180_A00_LP4_DSC_204Mhz.cfg)... done. copying bootloader(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/cboot.bin)... done. populating kernel to rootfs... done. populating initrd to rootfs... done. populating extlinux.conf.emmc to rootfs... done. populating /home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/kernel/dtb/tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb to rootfs... done. done. Making Boot image... done. copying bcffile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/cfg/board_config_p2597-devkit.xml)... done. Existing sosfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/nvtboot_recovery.bin) reused. copying tegraboot(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/nvtboot.bin)... done. Existing bpffile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/bpmp.bin) reused. copying wb0boot(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/warmboot.bin)... done. Existing tosfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/tos.img) reused. Existing eksfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/eks.img) reused. copying dtbfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/kernel/dtb/tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb)... done. Existing tbcfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/nvtboot_cpu.bin) reused. copying tbcdtbfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/kernel/dtb/tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb)... done. copying cfgfile(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/cfg/gnu_linux_tegraboot_emmc_full.xml) to flash.xml... done. creating gpt(ppt.img)... *** GPT Parameters *** device size -------------- 31276924928 bootpart size ------------ 8388608 userpart size ------------ 31268536320 Erase Block Size --------- 2097152 sector size -------------- 4096 Partition Config file ---- flash.xml Visible partition flag --- GP1 Primary GPT output ------- PPT->ppt.img Secondary GPT output ----- GPT->gpt.img Target device name ------- none *** PARTITION LAYOUT(24 partitions) *** [ BCT] BH 0 8191 4.0MiB [ NVC] BH 8192 16383 4.0MiB nvtboot.bin [ PPT] UH 0 4095 2.0MiB [ GP1] UH 4096 8191 2.0MiB [ APP] UH 8192 29368319 14336.0MiB system.img [ TBC] UV 29368320 29372415 2.0MiB nvtboot_cpu.bin [ EBT] UV 29372416 29380607 4.0MiB cboot.bin [ BPF] UV 29380608 29384703 2.0MiB bpmp.bin [ WB0] UV 29384704 29396991 6.0MiB warmboot.bin [ RP1] UV 29396992 29405183 4.0MiB tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb [ TOS] UV 29405184 29417471 6.0MiB tos.img [ EKS] UV 29417472 29421567 2.0MiB eks.img [ FX] UV 29421568 29425663 2.0MiB [ BMP] UV 29425664 29687807 128.0MiB bmp.blob [ SOS] UV 29687808 29728767 20.0MiB [ EXI] UV 29728768 29859839 64.0MiB [ LNX] UV 29859840 29990911 64.0MiB boot.img [ DTB] UV 29990912 29999103 4.0MiB tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb [ NXT] UV 29999104 30003199 2.0MiB [ MXB] UV 30003200 30015487 6.0MiB [ MXP] UV 30015488 30027775 6.0MiB [ USP] UV 30027776 30031871 2.0MiB [ UDA] UV 30031872 61067263 15154.0MiB [ GPT] UH 61067264 61071359 2.0MiB copying flasher(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/t210ref/cboot.bin)... done. Existing flashapp(/home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/tegraflash.py) reused. *** Updating [LNX] with boot.img *** ./tegraflash.py --bl cboot.bin --bldtb tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb --chip 0x21 --applet nvtboot_recovery.bin --cfg flash.xml --bct P2180_A00_LP4_DSC_204Mhz.cfg --bct P2180_A00_LP4_DSC_204Mhz.cfg --cfg flash.xml --cmd "sign; write LNX ./signed/boot.img.encrypt; reboot" --skipuid Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0100 ] Generating RCM messages [ 0.0111 ] tegrarcm --listrcm rcm_list.xml --chip 0x21 --download rcm nvtboot_recovery.bin 0 0 [ 0.0120 ] RCM 0 is saved as rcm_0.rcm [ 0.0125 ] RCM 1 is saved as rcm_1.rcm [ 0.0126 ] List of rcm files are saved in rcm_list.xml [ 0.0126 ] [ 0.0126 ] Signing RCM messages [ 0.0137 ] tegrasign --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.0147 ] Assuming zero filled SBK key [ 0.0214 ] [ 0.0215 ] Copying signature to RCM mesages [ 0.0225 ] tegrarcm --chip 0x21 --updatesig rcm_list_signed.xml [ 0.0240 ] [ 0.0240 ] Parsing partition layout [ 0.0252 ] tegraparser --pt flash.xml.tmp [ 0.0267 ] [ 0.0268 ] Creating list of images to be signed [ 0.0288 ] tegrahost --chip 0x21 --partitionlayout flash.xml.bin --list images_list.xml [ 0.0341 ] [ 0.0342 ] Generating signatures [ 0.0375 ] tegrasign --key None --list images_list.xml --pubkeyhash pub_key.key [ 0.0386 ] Assuming zero filled SBK key [ 0.1093 ] [ 0.1093 ] Generating br-bct [ 0.1102 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.cfg --chip 0x21 [ 0.1109 ] Copying Sdram info from 1 to 2 set [ 0.1127 ] Copying Sdram info from 2 to 3 set [ 0.1127 ] [ 0.1127 ] Updating boot device parameters [ 0.1135 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --updatedevparam flash.xml.bin [ 0.1142 ] Warning: No sdram params [ 0.1143 ] [ 0.1143 ] Updating bl info [ 0.1150 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml [ 0.2574 ] [ 0.2575 ] Updating secondary storage information into bct [ 0.2619 ] tegraparser --pt flash.xml.bin --chip 0x21 --updatecustinfo P2180_A00_LP4_DSC_204Mhz.bct [ 0.2659 ] [ 0.2660 ] Get Signed section bct [ 0.2693 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --listbct bct_list.xml [ 0.2734 ] [ 0.2735 ] Signing BCT [ 0.2808 ] tegrasign --key None --list bct_list.xml --pubkeyhash pub_key.key [ 0.2844 ] Assuming zero filled SBK key [ 0.2865 ] [ 0.2866 ] Updating BCT with signature [ 0.2910 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --updatesig bct_list_signed.xml [ 0.2953 ] [ 0.2954 ] Copying signatures [ 0.2992 ] tegrahost --chip 0x21 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml [ 0.3032 ] Run tegrabct to update tboot signature in bct [ 0.3652 ] [ 0.3654 ] Copying signed file in /home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/signed [ 0.4030 ] Generating RCM messages [ 0.4066 ] tegrarcm --listrcm rcm_list.xml --chip 0x21 --download rcm nvtboot_recovery.bin 0 0 [ 0.4100 ] RCM 0 is saved as rcm_0.rcm [ 0.4117 ] RCM 1 is saved as rcm_1.rcm [ 0.4121 ] List of rcm files are saved in rcm_list.xml [ 0.4121 ] [ 0.4121 ] Signing RCM messages [ 0.4156 ] tegrasign --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.4186 ] Assuming zero filled SBK key [ 0.4366 ] [ 0.4367 ] Copying signature to RCM mesages [ 0.4406 ] tegrarcm --chip 0x21 --updatesig rcm_list_signed.xml [ 0.5238 ] [ 0.5240 ] Boot Rom communication [ 0.5279 ] tegrarcm --chip 0x21 --rcm rcm_list_signed.xml --skipuid [ 0.5312 ] RCM version 0X210001 [ 0.9831 ] Boot Rom communication completed [ 1.9904 ] [ 1.9905 ] Parsing partition layout [ 1.9940 ] tegraparser --pt flash.xml.tmp [ 1.9982 ] [ 1.9982 ] Creating list of images to be signed [ 2.0016 ] tegrahost --chip 0x21 --partitionlayout flash.xml.bin --list images_list.xml [ 2.0140 ] [ 2.0141 ] Generating signatures [ 2.0192 ] tegrasign --key None --list images_list.xml --pubkeyhash pub_key.key [ 2.0220 ] Assuming zero filled SBK key [ 2.1470 ] [ 2.1470 ] Send BCT from Host [ 2.1470 ] Generating br-bct [ 2.1479 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.cfg --chip 0x21 [ 2.1488 ] Copying Sdram info from 1 to 2 set [ 2.1512 ] Copying Sdram info from 2 to 3 set [ 2.1513 ] [ 2.1513 ] Updating boot device parameters [ 2.1522 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --updatedevparam flash.xml.bin [ 2.1529 ] Warning: No sdram params [ 2.1530 ] [ 2.1531 ] Updating bl info [ 2.1539 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml [ 2.1550 ] [ 2.1551 ] Updating secondary storage information into bct [ 2.1558 ] tegraparser --pt flash.xml.bin --chip 0x21 --updatecustinfo P2180_A00_LP4_DSC_204Mhz.bct [ 2.1566 ] [ 2.1566 ] Get Signed section bct [ 2.1574 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --listbct bct_list.xml [ 2.1583 ] [ 2.1583 ] Signing BCT [ 2.1598 ] tegrasign --key None --list bct_list.xml --pubkeyhash pub_key.key [ 2.1606 ] Assuming zero filled SBK key [ 2.1610 ] [ 2.1611 ] Updating BCT with signature [ 2.1619 ] tegrabct --bct P2180_A00_LP4_DSC_204Mhz.bct --chip 0x21 --updatesig bct_list_signed.xml [ 2.1629 ] [ 2.1629 ] Sending BCTs [ 2.1638 ] tegrarcm --download bct P2180_A00_LP4_DSC_204Mhz.bct [ 2.1646 ] Applet version 00.01.0000 [ 2.6078 ] Sending bct [ 2.6079 ] [................................................] 100% [ 2.7300 ] [ 2.7301 ] Sending bootloader and pre-requisite binaries [ 2.7313 ] tegrarcm --download ebt cboot.bin 0 0 --download rp1 tegra210-jetson-tx1-p2597-2180-a01-devkit.dtb 0 [ 2.7325 ] Applet version 00.01.0000 [ 3.1930 ] Sending ebt [ 3.1937 ] [................................................] 100% [ 3.2839 ] Sending rp1 [ 3.2849 ] [................................................] 100% [ 3.3736 ] [ 3.3773 ] tegrarcm --boot recovery [ 3.3830 ] Applet version 00.01.0000 [ 3.8213 ] [ 3.8214 ] Writing partition [ 3.8244 ] tegradevflash --write LNX /home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/signed/boot.img.encrypt [ 3.8267 ] Cboot version 00.01.0000 [ 4.4332 ] Writing partition LNX with /home/burak/JetPack-L4T-3.3/64_TX1/Linux_for_Tegra/bootloader/signed/boot.img.encrypt [ 4.4349 ] [................................................] 100% [ 4.4749 ] [ 4.4750 ] Coldbooting the device [ 4.4768 ] tegradevflash --reboot coldboot [ 4.4783 ] Cboot version 00.01.0000 [ 4.6559 ] *** The [LNX] has been updated successfully. ***