[0000.065] I> MB1 (version: 0.11.0.0-t234-54845784-7fb1fa27) [0000.070] I> t234-A01-0-Silicon (0x12347) Prod [0000.075] I> Boot-mode : Coldboot [0000.078] I> Emulation: [0000.080] I> Entry timestamp: 0x00000000 [0000.084] I> last_boot_error: 0x0 [0000.087] I> BR-BCT: preprod_dev_sign: 0 [0000.091] I> rst_source: 0x0, rst_level: 0x0 [0000.095] I> Task: Clocks enable (0x50011b9d) [0000.099] I> Task: Crypto init (0x50018df5) [0000.103] I> Task: Secure debug controls (0x5000c76d) [0000.108] E> Error: ECID of check failed!! [0000.112] E> Error: ECID of check failed!! [0000.116] E> Error: ECID of check failed!! [0000.120] E> Error: ECID of check failed!! [0000.124] I> Task: Program NV master stream id (0x5000c725) [0000.129] I> Task: Verify boot mode (0xd482021) [0000.138] I> Task: Alias fuses (0x5000ecd5) [0000.142] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.149] I> Task: 0x5000e911 [0000.152] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.157] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.161] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.165] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.170] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.174] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.178] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.182] I> FUSE_SKU_INFO_0 = 0xd0 [0000.185] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.190] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.193] I> SKU: Perfect F0 [0000.196] I> Task: Voltage monitor (0x50011ba5) [0000.200] I> VMON: Vmon re-calibration and fine tuning done [0000.206] I> Task: Blockdev init (0x500157e1) [0000.210] I> Task: UPHY init (0x5001b42d) [0000.214] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.219] I> Task: Boot device init (0x5000d6a9) [0000.224] E> Adding eMMC storage modules [0000.228] I> Boot-device: QSPI (instance: 0) [0000.232] I> qspi flash params source = mb1bct [0000.236] I> Qspi clock source : pllc_out0 [0000.240] I> QSPI-0l initialized successfully [0000.244] I> Task: TSC init (0x5001c7e1) [0000.248] I> Task: Enable WDT 5th expiry (0x5001d27d) [0000.253] I> Task: Disable WDT globally (0x5001d2b9) [0000.258] I> Task: I2C register (0x50000a09) [0000.262] I> Task: Reset FSI (0x50011ba1) [0000.266] I> Task: Pinmux init (0x50010e95) [0000.270] I> Task: Prod config init (0x50011075) [0000.275] I> Task: Pad voltage init (0x50010f85) [0000.279] I> Task: Prod init (0x50011119) [0000.283] I> Task: Thermal check (0x5001121d) [0000.288] I> max_chip_limit = 115 [0000.291] I> min_chip_limit = -30 [0000.304] I> max temp read = 45 [0000.307] I> min temp read = 44 [0000.310] I> Task: Common rail init (0x50011695) [0000.314] W> Thermal config not found in BCT [0000.318] W> Generic i2c config not found in BCT [0000.324] > DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.332] W> MEMIO rail config not found in BCT [0000.337] I> Task: Mem clock src (0x5000f6b9) [0000.341] I> Task: BR PMIC seq (0x50011711) [0000.345] I> Task: Misc. board config (0x500116ed) [0000.349] W> Platform config not found in BCT [0000.354] I> Task: Load membct (0x5000f5d5) [0000.358] I> RAM_CODE 0x4000401 [0000.361] I> Loading MEM-BCT to SysRAM [0000.364] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.370] I> Slot: 0 [0000.372] I> Binary[0] block-0 (partition size: 0x40000) [0000.377] I> get_binary_info: Binary name: MEM-BCT-0 [0000.382] I> Size of crypto header is 8192 [0000.386] I> BCH load address is : 0x40050000 [0000.390] I> Size of crypto header is 8192 [0000.394] I> BCH of MEM-BCT-0 read from storage [0000.398] I> BCH address is : 0x40050000 [0000.402] I> MEM-BCT-0 header integrity check is success [0000.407] I> Binary magic in BCH component 0 is MEM0 [0000.412] I> component binary type is 0 [0000.416] I> MEM-BCT-0 binary is read from storage [0000.421] I> MEM-BCT-0 binary integrity check is success [0000.426] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.437] I> RAM_CODE 0x4000401 [0000.441] I> Task: Save mem-bct info (0x50011d59) [0000.445] I> Task: SDRAM params override (0x50010c79) [0000.450] I> Task: Carveout allocate (0x50011da5) [0000.455] I> RCM blob carveout will not be allocated [0000.460] I> ECC region[0]: Start:0x0, End:0x0 [0000.464] I> ECC region[1]: Start:0x0, End:0x0 [0000.468] I> ECC region[2]: Start:0x0, End:0x0 [0000.472] I> ECC region[3]: Start:0x0, End:0x0 [0000.477] I> ECC region[4]: Start:0x0, End:0x0 [0000.481] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.487] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.491] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.496] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.501] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.507] I> allocated(CO:51) base:0x80000000 size:0x8000000 align: 0x200000 [0000.514] I> allocated(CO:44) base:0xd6000000 size:0x2a000000 align: 0x100000 [0000.521] I> allocated(CO:31) base:0xce000000 size:0x8000000 align: 0x100000 [0000.528] I> allocated(CO:39) base:0xc8000000 size:0x6000000 align: 0x200000 [0000.535] I> allocated(CO:20) base:0xc6000000 size:0x2000000 align: 0x2000000 [0000.542] I> allocated(CO:24) base:0xc4000000 size:0x2000000 align: 0x2000000 [0000.549] I> allocated(CO:28) base:0xc2000000 size:0x2000000 align: 0x2000000 [0000.556] I> allocated(CO:29) base:0xc0000000 size:0x2000000 align: 0x2000000 [0000.563] I> allocated(CO:41) base:0xbf000000 size:0x1000000 align: 0x100000 [0000.570] I> allocated(CO:43) base:0xbe000000 size:0x1000000 align: 0x200000 [0000.577] I> allocated(CO:02) base:0xbd800000 size:0x800000 align: 0x800000 [0000.584] I> allocated(CO:03) base:0xbd000000 size:0x800000 align: 0x800000 [0000.591] I> allocated(CO:06) base:0xbc800000 size:0x800000 align: 0x800000 [0000.598] I> allocated(CO:10) base:0xbc000000 size:0x800000 align: 0x800000 [0000.604] I> allocated(CO:56) base:0xbb800000 size:0x800000 align: 0x200000 [0000.611] I> allocated(CO:07) base:0xbb400000 size:0x400000 align: 0x400000 [0000.618] I> allocated(CO:22) base:0xbb000000 size:0x400000 align: 0x400000 [0000.625] I> allocated(CO:33) base:0xbac00000 size:0x400000 align: 0x200000 [0000.632] I> allocated(CO:47) base:0xba800000 size:0x400000 align: 0x200000 [0000.639] I> allocated(CO:01) base:0xba700000 size:0x100000 align: 0x100000 [0000.645] I> allocated(CO:04) base:0xba600000 size:0x100000 align: 0x100000 [0000.652] I> allocated(CO:05) base:0xba500000 size:0x100000 align: 0x100000 [0000.659] I> allocated(CO:08) base:0xba400000 size:0x100000 align: 0x100000 [0000.666] I> allocated(CO:09) base:0xba300000 size:0x100000 align: 0x100000 [0000.673] I> allocated(CO:15) base:0xba200000 size:0x100000 align: 0x100000 [0000.680] I> allocated(CO:17) base:0xba100000 size:0x100000 align: 0x100000 [0000.686] I> allocated(CO:23) base:0xba000000 size:0x100000 align: 0x100000 [0000.693] I> allocated(CO:27) base:0xb9f00000 size:0x100000 align: 0x100000 [0000.700] I> allocated(CO:42) base:0xb9e00000 size:0x100000 align: 0x100000 [0000.707] I> allocated(CO:54) base:0xb9d80000 size:0x80000 align: 0x80000 [0000.714] I> allocated(CO:26) base:0xb9d40000 size:0x40000 align: 0x2000 [0000.720] I> allocated(CO:48) base:0xb9d20000 size:0x20000 align: 0x10000 [0000.727] I> allocated(CO:34) base:0xb9d10000 size:0x10000 align: 0x10000 [0000.733] I> allocated(CO:35) base:0xb9d00000 size:0x10000 align: 0x10000 [0000.740] I> allocated(CO:49) base:0xb9cf0000 size:0x10000 align: 0x10000 [0000.747] I> allocated(CO:50) base:0xb9ce0000 size:0x10000 align: 0x10000 [0000.753] I> allocated(CO:52) base:0xb9cd0000 size:0x10000 align: 0x10000 [0000.760] I> Task: SDRAM init (0x5000f6bd) [0000.766] I> SDRAM-params @ 0xd485000 [0000.770] I> MSS code-drop: NvBootSdramInit [0000.774] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision : 8 [0000.781] I> MSS CAR: Init PLLM [0000.784] I> MSS CAR: Init PLLHUB [0000.795] I> mb1_sdram_init Done ! [0000.798] I> SDRAM Size in Total 800000000 [0000.802] I> SDRAM test pass [0000.805] I> Task: Dram ecc scrub (0x5000f2c9) [0000.809] I> Task: DRAM alias check (0x50010c71) [0001.026] I> Task: Register checker (0x50010c75) [0001.034] I> Task: Enable clock-mon (0x5001c301) [0001.051] I> FMON: Fmon re-programmed in mb1 [0001.056] I> Task: Mapper init (0x5001a0d5) [0001.061] I> Task: SC7 Context Init (0x5001cacd) [0001.067] I> NV_SC7 Context addr: 0xa0000000 [0001.072] I> Task: CCPLEX IST init (0x5000ce75) [0001.078] I> Task: CPU WP0 (0x5000c2c9) [0001.084] I> Loading MCE [0001.086] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.092] I> Slot: 0 [0001.094] I> Binary[8] block-0 (partition size: 0x80000) [0001.100] I> get_binary_info: Binary name: MCE [0001.105] I> Size of crypto header is 8192 [0001.110] I> BCH load address is : 0x4003e000 [0001.115] I> Size of crypto header is 8192 [0001.120] I> BCH of MCE read from storage [0001.124] I> BCH address is : 0x4003e000 [0001.130] I> MCE header integrity check is success [0001.135] I> Binary magic in BCH component 0 is MTSM [0001.140] I> component binary type is 8 [0001.144] I> Size of crypto header is 8192 [0001.151] I> MCE binary is read from storage [0001.156] I> MCE binary integrity check is success [0001.161] I> Binary MCE loaded successfully at 0x40000000 (0x29e90) [0001.169] I> Size of crypto header is 8192 [0001.180] I> Size of crypto header is 8192 [0001.185] I> Sending WP0 mailbox command to PSC [0001.198] I> Task: MB1 fixed firewalls (0x5001b1bd) [0001.210] I> Task: Load bpmp-fw (0x5001b311) [0001.215] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.221] I> Slot: 0 [0001.223] I> Binary[15] block-0 (partition size: 0x100000) [0001.230] I> get_binary_info: Binary name: BPMP_FW [0001.235] I> Size of crypto header is 8192 [0001.239] I> BCH load address is : 0x807fe000 [0001.245] I> Size of crypto header is 8192 [0001.250] I> BCH of BPMP_FW read from storage [0001.254] I> BCH address is : 0x807fe000 [0001.260] I> BPMP_FW header integrity check is success [0001.265] I> Binary magic in BCH component 0 is BPMF [0001.271] I> component binary type is 15 [0001.275] I> Size of crypto header is 8192 [0001.290] I> BPMP_FW binary is read from storage [0001.297] I> BPMP_FW binary integrity check is success [0001.302] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf3940) [0001.311] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.317] I> Slot: 0 [0001.319] I> Binary[16] block-0 (partition size: 0x100000) [0001.325] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.331] I> Size of crypto header is 8192 [0001.335] I> BCH load address is : 0x807fc000 [0001.341] I> Size of crypto header is 8192 [0001.346] I> BCH of BPMP_FW_DTB read from storage [0001.351] I> BCH address is : 0x807fc000 [0001.356] I> BPMP_FW_DTB header integrity check is success [0001.362] I> Binary magic in BCH component 0 is BPMD [0001.367] I> component binary type is 16 [0001.372] I> Size of crypto header is 8192 [0001.378] I> BPMP_FW_DTB binary is read from storage [0001.384] I> BPMP_FW_DTB binary integrity check is success [0001.390] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbc00 (0x20380) [0001.398] I> Program IPC carveouts [0001.404] I> Task: Load psc-fw (0x5001b3b9) [0001.409] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.415] I> Slot: 0 [0001.418] I> Binary[17] block-0 (partition size: 0x80000) [0001.424] I> get_binary_info: Binary name: PSC_FW [0001.429] I> Size of crypto header is 8192 [0001.433] I> BCH load address is : 0x803fe000 [0001.439] I> Size of crypto header is 8192 [0001.444] I> BCH of PSC_FW read from storage [0001.448] I> BCH address is : 0x803fe000 [0001.454] I> PSC_FW header integrity check is success [0001.459] I> Binary magic in BCH component 0 is PFWP [0001.465] I> component binary type is 17 [0001.469] I> Size of crypto header is 8192 [0001.477] I> PSC_FW binary is read from storage [0001.483] I> PSC_FW binary integrity check is success [0001.489] I> Binary PSC_FW loaded successfully at 0x80000000 (0x57800) [0001.497] I> Task: Load nvdec-fw (0x5001c05d) [0001.503] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.508] I> Slot: 0 [0001.511] I> Binary[7] block-0 (partition size: 0x100000) [0001.517] I> get_binary_info: Binary name: NVDEC [0001.522] I> Size of crypto header is 8192 [0001.527] I> BCH load address is : 0x800fe000 [0001.532] I> Size of crypto header is 8192 [0001.537] I> BCH of NVDEC read from storage [0001.541] I> BCH address is : 0x800fe000 [0001.547] I> NVDEC header integrity check is success [0001.552] I> Binary magic in BCH component 0 is NDEC [0001.558] I> component binary type is 7 [0001.562] I> Size of crypto header is 8192 [0001.569] I> NVDEC binary is read from storage [0001.574] I> NVDEC binary integrity check is success [0001.580] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.592] I> Task: Load tsec-fw (0x5001c249) [0001.597] I> TSEC-FW load support not enabled [0001.602] I> Task: TZDRAM setup (0x50012515) [0001.607] I> Task: SC7 context save (0x5001cbd1) [0001.613] I> NV_SC7 Context addr: 0xa0000000 [0001.619] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.625] I> Slot: 0 [0001.627] I> Binary[13] block-0 (partition size: 0x20000) [0001.633] I> get_binary_info: Binary name: SC7-FW [0001.638] I> Size of crypto header is 8192 [0001.643] I> Size of crypto header is 8192 [0001.647] I> BCH load address is : 0xa0002000 [0001.653] I> Size of crypto header is 8192 [0001.658] I> BCH of SC7-FW read from storage [0001.662] I> BCH address is : 0xa0002000 [0001.668] I> SC7-FW header integrity check is success [0001.673] I> Binary magic in BCH component 0 is WB0B [0001.679] I> component binary type is 13 [0001.683] I> Size of crypto header is 8192 [0001.688] I> SC7-FW binary is read from storage [0001.694] I> SC7-FW binary integrity check is success [0001.699] I> Binary SC7-FW loaded successfully at 0xa0004000 (0xa4e0) [0001.707] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.713] I> Slot: 0 [0001.715] I> Binary[22] block-0 (partition size: 0x30000) [0001.721] I> get_binary_info: Binary name: PSC_RF [0001.727] I> Size of crypto header is 8192 [0001.731] I> Size of crypto header is 8192 [0001.736] I> BCH load address is : 0xa000e4e0 [0001.741] I> Size of crypto header is 8192 [0001.746] I> BCH of PSC_RF read from storage [0001.751] I> BCH address is : 0xa000e4e0 [0001.756] I> PSC_RF header integrity check is success [0001.762] I> Binary magic in BCH component 0 is PSCR [0001.767] I> component binary type is 22 [0001.771] I> Size of crypto header is 8192 [0001.777] I> PSC_RF binary is read from storage [0001.783] I> PSC_RF binary integrity check is success [0001.788] I> Binary PSC_RF loaded successfully at 0xa00104e0 (0x1af70) [0001.807] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.813] I> Slot: 0 [0001.815] I> Binary[14] block-0 (partition size: 0x20000) [0001.821] I> get_binary_info: Binary name: MB2_RF [0001.826] I> Size of crypto header is 8192 [0001.831] I> Size of crypto header is 8192 [0001.835] I> BCH load address is : 0xa008c020 [0001.841] I> Size of crypto header is 8192 [0001.846] I> BCH of MB2_RF read from storage [0001.850] I> BCH address is : 0xa008c020 [0001.856] I> MB2_RF header integrity check is success [0001.861] I> Binary magic in BCH component 0 is MB2R [0001.867] I> component binary type is 14 [0001.871] I> Size of crypto header is 8192 [0001.876] I> MB2_RF binary is read from storage [0001.882] I> MB2_RF binary integrity check is success [0001.887] I> Binary MB2_RF loaded successfully at 0xa008e020 (0xd360) [0001.896] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.904] I> SC7 context fuse-bypass data is empty [0001.909] I> SC7 context save done [0001.913] I> Task: Load MB2/Applet/FSKP (0x5001c305) [0001.919] I> Loading MB2 [0001.922] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.928] I> Slot: 0 [0001.930] I> Binary[6] block-0 (partition size: 0x70000) [0001.936] I> get_binary_info: Binary name: MB2 [0001.941] I> Size of crypto header is 81ÿâ [0000.066] I> MB1 (version: 0.11.0.0-t234-54845784-7fb1fa27) [0000.072] I> t234-A01-0-Silicon (0x12347) Prod [0000.076] I> Boot-mode : Coldboot [0000.079] I> Emulation: [0000.081] I> Entry timestamp: 0x00000000 [0000.085] I> last_boot_error: 0x0 [0000.088] I> BR-BCT: preprod_dev_sign: 0 [0000.092] I> rst_source: 0x0, rst_level: 0x0 [0000.096] I> Task: Clocks enable (0x50011b9d) [0000.100] I> Task: Crypto init (0x50018df5) [0000.104] I> Task: Secure debug controls (0x5000c76d) [0000.109] E> Error: ECID of check failed!! [0000.113] E> Error: ECID of check failed!! [0000.117] E> Error: ECID of check failed!! [0000.121] E> Error: ECID of check failed!! [0000.125] I> Task: Program NV master stream id (0x5000c725) [0000.131] I> Task: Verify boot mode (0xd482021) [0000.139] I> Task: Alias fuses (0x5000ecd5) [0000.143] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.150] I> Task: 0x5000e911 [0000.153] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.158] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.163] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.167] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.171] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.175] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.179] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.184] I> FUSE_SKU_INFO_0 = 0xd0 [0000.187] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.191] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.195] I> SKU: Perfect F0 [0000.197] I> Task: Voltage monitor (0x50011ba5) [0000.202] I> VMON: Vmon re-calibration and fine tuning done [0000.207] I> Task: Blockdev init (0x500157e1) [0000.211] I> Task: UPHY init (0x5001b42d) [0000.216] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.221] I> Task: Boot device init (0x5000d6a9) [0000.226] E> Adding eMMC storage modules [0000.230] I> Boot-device: QSPI (instance: 0) [0000.234] I> qspi flash params source = mb1bct [0000.238] I> Qspi clock source : pllc_out0 [0000.242] I> QSPI-0l initialized successfully [0000.246] I> Task: TSC init (0x5001c7e1) [0000.250] I> Task: Enable WDT 5th expiry (0x5001d27d) [0000.255] I> Task: Disable WDT globally (0x5001d2b9) [0000.260] I> Task: I2C register (0x50000a09) [0000.264] I> Task: Reset FSI (0x50011ba1) [0000.268] I> Task: Pinmux init (0x50010e95) [0000.272] I> Task: Prod config init (0x50011075) [0000.277] I> Task: Pad voltage init (0x50010f85) [0000.281] I> Task: Prod init (0x50011119) [0000.285] I> Task: Thermal check (0x5001121d) [0000.290] I> max_chip_limit = 115 [0000.293] I> min_chip_limit = -30 [0000.306] I> max temp read = 45 [0000.309] I> min temp read = 44 [0000.312] I> Task: Common rail init (0x50011695) [0000.316] W> Thermal config not found in BCT [0000.320] W> Generic i2c config not found in BCT [0000.326] > DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.334] W> MEMIO rail config not found in BCT [0000.339] I> Task: Mem clock src (0x5000f6b9) [0000.343] I> Task: BR PMIC seq (0x50011711) [0000.347] I> Task: Misc. board config (0x500116ed) [0000.351] W> Platform config not found in BCT [0000.356] I> Task: Load membct (0x5000f5d5) [0000.360] I> RAM_CODE 0x4000401 [0000.363] I> Loading MEM-BCT to SysRAM [0000.366] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.372] I> Slot: 0 [0000.374] I> Binary[0] block-0 (partition size: 0x40000) [0000.379] I> get_binary_info: Binary name: MEM-BCT-0 [0000.384] I> Size of crypto header is 8192 [0000.388] I> BCH load address is : 0x40050000 [0000.392] I> Size of crypto header is 8192 [0000.396] I> BCH of MEM-BCT-0 read from storage [0000.400] I> BCH address is : 0x40050000 [0000.404] I> MEM-BCT-0 header integrity check is success [0000.409] I> Binary magic in BCH component 0 is MEM0 [0000.414] I> component binary type is 0 [0000.419] I> MEM-BCT-0 binary is read from storage [0000.423] I> MEM-BCT-0 binary integrity check is success [0000.429] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.439] I> RAM_CODE 0x4000401 [0000.443] I> Task: Save mem-bct info (0x50011d59) [0000.447] I> Task: SDRAM params override (0x50010c79) [0000.452] I> Task: Carveout allocate (0x50011da5) [0000.457] I> RCM blob carveout will not be allocated [0000.462] I> ECC region[0]: Start:0x0, End:0x0 [0000.466] I> ECC region[1]: Start:0x0, End:0x0 [0000.470] I> ECC region[2]: Start:0x0, End:0x0 [0000.474] I> ECC region[3]: Start:0x0, End:0x0 [0000.479] I> ECC region[4]: Start:0x0, End:0x0 [0000.483] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.489] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.493] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.498] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.503] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.509] I> allocated(CO:51) base:0x80000000 size:0x8000000 align: 0x200000 [0000.516] I> allocated(CO:44) base:0xd6000000 size:0x2a000000 align: 0x100000 [0000.523] I> allocated(CO:31) base:0xce000000 size:0x8000000 align: 0x100000 [0000.530] I> allocated(CO:39) base:0xc8000000 size:0x6000000 align: 0x200000 [0000.537] I> allocated(CO:20) base:0xc6000000 size:0x2000000 align: 0x2000000 [0000.544] I> allocated(CO:24) base:0xc4000000 size:0x2000000 align: 0x2000000 [0000.551] I> allocated(CO:28) base:0xc2000000 size:0x2000000 align: 0x2000000 [0000.558] I> allocated(CO:29) base:0xc0000000 size:0x2000000 align: 0x2000000 [0000.565] I> allocated(CO:41) base:0xbf000000 size:0x1000000 align: 0x100000 [0000.572] I> allocated(CO:43) base:0xbe000000 size:0x1000000 align: 0x200000 [0000.579] I> allocated(CO:02) base:0xbd800000 size:0x800000 align: 0x800000 [0000.586] I> allocated(CO:03) base:0xbd000000 size:0x800000 align: 0x800000 [0000.593] I> allocated(CO:06) base:0xbc800000 size:0x800000 align: 0x800000 [0000.600] I> allocated(CO:10) base:0xbc000000 size:0x800000 align: 0x800000 [0000.606] I> allocated(CO:56) base:0xbb800000 size:0x800000 align: 0x200000 [0000.613] I> allocated(CO:07) base:0xbb400000 size:0x400000 align: 0x400000 [0000.620] I> allocated(CO:22) base:0xbb000000 size:0x400000 align: 0x400000 [0000.627] I> allocated(CO:33) base:0xbac00000 size:0x400000 align: 0x200000 [0000.634] I> allocated(CO:47) base:0xba800000 size:0x400000 align: 0x200000 [0000.641] I> allocated(CO:01) base:0xba700000 size:0x100000 align: 0x100000 [0000.647] I> allocated(CO:04) base:0xba600000 size:0x100000 align: 0x100000 [0000.654] I> allocated(CO:05) base:0xba500000 size:0x100000 align: 0x100000 [0000.661] I> allocated(CO:08) base:0xba400000 size:0x100000 align: 0x100000 [0000.668] I> allocated(CO:09) base:0xba300000 size:0x100000 align: 0x100000 [0000.675] I> allocated(CO:15) base:0xba200000 size:0x100000 align: 0x100000 [0000.682] I> allocated(CO:17) base:0xba100000 size:0x100000 align: 0x100000 [0000.688] I> allocated(CO:23) base:0xba000000 size:0x100000 align: 0x100000 [0000.695] I> allocated(CO:27) base:0xb9f00000 size:0x100000 align: 0x100000 [0000.702] I> allocated(CO:42) base:0xb9e00000 size:0x100000 align: 0x100000 [0000.709] I> allocated(CO:54) base:0xb9d80000 size:0x80000 align: 0x80000 [0000.716] I> allocated(CO:26) base:0xb9d40000 size:0x40000 align: 0x2000 [0000.722] I> allocated(CO:48) base:0xb9d20000 size:0x20000 align: 0x10000 [0000.729] I> allocated(CO:34) base:0xb9d10000 size:0x10000 align: 0x10000 [0000.735] I> allocated(CO:35) base:0xb9d00000 size:0x10000 align: 0x10000 [0000.742] I> allocated(CO:49) base:0xb9cf0000 size:0x10000 align: 0x10000 [0000.749] I> allocated(CO:50) base:0xb9ce0000 size:0x10000 align: 0x10000 [0000.755] I> allocated(CO:52) base:0xb9cd0000 size:0x10000 align: 0x10000 [0000.762] I> Task: SDRAM init (0x5000f6bd) [0000.769] I> SDRAM-params @ 0xd485000 [0000.772] I> MSS code-drop: NvBootSdramInit [0000.776] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision : 8 [0000.783] I> MSS CAR: Init PLLM [0000.787] I> MSS CAR: Init PLLHUB [0000.797] I> mb1_sdram_init Done ! [0000.800] I> SDRAM Size in Total 800000000 [0000.804] I> SDRAM test pass [0000.807] I> Task: Dram ecc scrub (0x5000f2c9) [0000.811] I> Task: DRAM alias check (0x50010c71) [0001.028] I> Task: Register checker (0x50010c75) [0001.036] I> Task: Enable clock-mon (0x5001c301) [0001.053] I> FMON: Fmon re-programmed in mb1 [0001.058] I> Task: Mapper init (0x5001a0d5) [0001.063] I> Task: SC7 Context Init (0x5001cacd) [0001.069] I> NV_SC7 Context addr: 0xa0000000 [0001.074] I> Task: CCPLEX IST init (0x5000ce75) [0001.080] I> Task: CPU WP0 (0x5000c2c9) [0001.086] I> Loading MCE [0001.088] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.094] I> Slot: 0 [0001.096] I> Binary[8] block-0 (partition size: 0x80000) [0001.102] I> get_binary_info: Binary name: MCE [0001.107] I> Size of crypto header is 8192 [0001.112] I> BCH load address is : 0x4003e000 [0001.117] I> Size of crypto header is 8192 [0001.122] I> BCH of MCE read from storage [0001.126] I> BCH address is : 0x4003e000 [0001.132] I> MCE header integrity check is success [0001.137] I> Binary magic in BCH component 0 is MTSM [0001.142] I> component binary type is 8 [0001.146] I> Size of crypto header is 8192 [0001.153] I> MCE binary is read from storage [0001.158] I> MCE binary integrity check is success [0001.163] I> Binary MCE loaded successfully at 0x40000000 (0x29e90) [0001.171] I> Size of crypto header is 8192 [0001.183] I> Size of crypto header is 8192 [0001.187] I> Sending WP0 mailbox command to PSC [0001.200] I> Task: MB1 fixed firewalls (0x5001b1bd) [0001.212] I> Task: Load bpmp-fw (0x5001b311) [0001.217] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.223] I> Slot: 0 [0001.225] I> Binary[15] block-0 (partition size: 0x100000) [0001.232] I> get_binary_info: Binary name: BPMP_FW [0001.237] I> Size of crypto header is 8192 [0001.241] I> BCH load address is : 0x807fe000 [0001.247] I> Size of crypto header is 8192 [0001.252] I> BCH of BPMP_FW read from storage [0001.256] I> BCH address is : 0x807fe000 [0001.262] I> BPMP_FW header integrity check is success [0001.267] I> Binary magic in BCH component 0 is BPMF [0001.273] I> component binary type is 15 [0001.277] I> Size of crypto header is 8192 [0001.292] I> BPMP_FW binary is read from storage [0001.299] I> BPMP_FW binary integrity check is success [0001.304] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf3940) [0001.313] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.319] I> Slot: 0 [0001.321] I> Binary[16] block-0 (partition size: 0x100000) [0001.327] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.333] I> Size of crypto header is 8192 [0001.337] I> BCH load address is : 0x807fc000 [0001.343] I> Size of crypto header is 8192 [0001.348] I> BCH of BPMP_FW_DTB read from storage [0001.353] I> BCH address is : 0x807fc000 [0001.358] I> BPMP_FW_DTB header integrity check is success [0001.364] I> Binary magic in BCH component 0 is BPMD [0001.369] I> component binary type is 16 [0001.374] I> Size of crypto header is 8192 [0001.380] I> BPMP_FW_DTB binary is read from storage [0001.386] I> BPMP_FW_DTB binary integrity check is success [0001.392] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbc00 (0x20380) [0001.400] I> Program IPC carveouts [0001.406] I> Task: Load psc-fw (0x5001b3b9) [0001.411] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.417] I> Slot: 0 [0001.420] I> Binary[17] block-0 (partition size: 0x80000) [0001.426] I> get_binary_info: Binary name: PSC_FW [0001.431] I> Size of crypto header is 8192 [0001.435] I> BCH load address is : 0x803fe000 [0001.441] I> Size of crypto header is 8192 [0001.446] I> BCH of PSC_FW read from storage [0001.450] I> BCH address is : 0x803fe000 [0001.456] I> PSC_FW header integrity check is success [0001.461] I> Binary magic in BCH component 0 is PFWP [0001.467] I> component binary type is 17 [0001.471] I> Size of crypto header is 8192 [0001.479] I> PSC_FW binary is read from storage [0001.485] I> PSC_FW binary integrity check is success [0001.491] I> Binary PSC_FW loaded successfully at 0x80000000 (0x57800) [0001.499] I> Task: Load nvdec-fw (0x5001c05d) [0001.505] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.511] I> Slot: 0 [0001.513] I> Binary[7] block-0 (partition size: 0x100000) [0001.519] I> get_binary_info: Binary name: NVDEC [0001.524] I> Size of crypto header is 8192 [0001.529] I> BCH load address is : 0x800fe000 [0001.534] I> Size of crypto header is 8192 [0001.539] I> BCH of NVDEC read from storage [0001.543] I> BCH address is : 0x800fe000 [0001.549] I> NVDEC header integrity check is success [0001.554] I> Binary magic in BCH component 0 is NDEC [0001.560] I> component binary type is 7 [0001.564] I> Size of crypto header is 8192 [0001.571] I> NVDEC binary is read from storage [0001.576] I> NVDEC binary integrity check is success [0001.582] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.594] I> Task: Load tsec-fw (0x5001c249) [0001.599] I> TSEC-FW load support not enabled [0001.604] I> Task: TZDRAM setup (0x50012515) [0001.609] I> Task: SC7 context save (0x5001cbd1) [0001.615] I> NV_SC7 Context addr: 0xa0000000 [0001.621] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.627] I> Slot: 0 [0001.629] I> Binary[13] block-0 (partition size: 0x20000) [0001.635] I> get_binary_info: Binary name: SC7-FW [0001.640] I> Size of crypto header is 8192 [0001.645] I> Size of crypto header is 8192 [0001.650] I> BCH load address is : 0xa0002000 [0001.655] I> Size of crypto header is 8192 [0001.660] I> BCH of SC7-FW read from storage [0001.664] I> BCH address is : 0xa0002000 [0001.670] I> SC7-FW header integrity check is success [0001.675] I> Binary magic in BCH component 0 is WB0B [0001.681] I> component binary type is 13 [0001.685] I> Size of crypto header is 8192 [0001.690] I> SC7-FW binary is read from storage [0001.696] I> SC7-FW binary integrity check is success [0001.701] I> Binary SC7-FW loaded successfully at 0xa0004000 (0xa4e0) [0001.709] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.715] I> Slot: 0 [0001.717] I> Binary[22] block-0 (partition size: 0x30000) [0001.723] I> get_binary_info: Binary name: PSC_RF [0001.729] I> Size of crypto header is 8192 [0001.733] I> Size of crypto header is 8192 [0001.738] I> BCH load address is : 0xa000e4e0 [0001.743] I> Size of crypto header is 8192 [0001.748] I> BCH of PSC_RF read from storage [0001.753] I> BCH address is : 0xa000e4e0 [0001.758] I> PSC_RF header integrity check is success [0001.764] I> Binary magic in BCH component 0 is PSCR [0001.769] I> component binary type is 22 [0001.773] I> Size of crypto header is 8192 [0001.779] I> PSC_RF binary is read from storage [0001.785] I> PSC_RF binary integrity check is success [0001.790] I> Binary PSC_RF loaded successfully at 0xa00104e0 (0x1af70) [0001.809] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.815] I> Slot: 0 [0001.817] I> Binary[14] block-0 (partition size: 0x20000) [0001.823] I> get_binary_info: Binary name: MB2_RF [0001.828] I> Size of crypto header is 8192 [0001.833] I> Size of crypto header is 8192 [0001.838] I> BCH load address is : 0xa008c020 [0001.843] I> Size of crypto header is 8192 [0001.848] I> BCH of MB2_RF read from storage [0001.852] I> BCH address is : 0xa008c020 [0001.858] I> MB2_RF header integrity check is success [0001.864] I> Binary magic in BCH component 0 is MB2R [0001.869] I> component binary type is 14 [0001.873] I> Size of crypto header is 8192 [0001.878] I> MB2_RF binary is read from storage [0001.884] I> MB2_RF binary integrity check is success [0001.889] I> Binary MB2_RF loaded successfully at 0xa008e020 (0xd360) [0001.898] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.906] I> SC7 context fuse-bypass data is empty [0001.911] I> SC7 context save done [0001.915] I> Task: Load MB2/Applet/FSKP (0x5001c305) [0001.921] I> Loading MB2 [0001.924] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.930] I> Slot: 0 [0001.932] I> Binary[6] block-0 (partition size: 0x70000) [0001.938] I> get_binary_info: Binary name: MB2 [0001.943] I> Size of crypto header is 8192 [0001.947] I> BCH load address is : 0x8007e000 [0001.953] I> Size of crypto header is 8192 [0001.958] I> BCH of MB2 read from storage [0001.962] I> BCH address is : 0x8007e000 [0001.968] I> MB2 header integrity check is success [0001.973] I> Binary magic in BCH component 0 is MB2B [0001.978] I> component binary type is 6 [0001.982] I> Size of crypto header is 8192 [0001.991] I> MB2 binary is read from storage [0001.997] I> MB2 binary integrity check is success [0002.002] I> Binary MB2 loaded successfully at 0x80000000 (0x69940) [0002.011] I> Task: Prepare MB2 params (0x5001c3d5) [0002.018] I> MB2-params @ 0x40060000 [0002.025] I> BR-BCT Boot Chain Fields [0002.029] I> u32_non_gpio_select_boot_chain : 0 [0002.034] I> u32_num_boot_chains : 2 [0002.039] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.044] I> Task: Dram ecc test (0x5000f379) [0002.050] I> Task: Misc NV security settings (0x5000ca35) [0002.056] I> NVDEC sticky bits programming done [0002.061] I> Task: GPIO interrupt map (0x50011a61) [0002.068] I> Task: Disable/Reload WDT (0x5001d2e9) [0002.073] I> Programmed SLCG global override := 0x0 [0002.079] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e8d12f8b) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x002066b7 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0xbb800000, size:0x800000] I> Task: Enable hot-plug capability (0x5001aed8) I> Task: Set blob address (0x50001c70) I> Task: PSC mailbox init (0x5000e5e0) I> Task: Crypto init (0x50005abc) I> Task: I2C register (0x50001c5c) I> Task: Boot device init (0x50001d2c) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> qspi flash-0 params source = MB2 params I> sdmmc-3 params source = MB2 params I> Task: Partition Manager Init (0x50001cf8) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50012818) I> Task: Load AUXP FWs (0x5001aa7c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-56320 (partition size: 0x90000), name: A_spe-fw E> Binary spe is not found in comp table I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-57472 (partition size: 0x100000), name: A_rce-fw E> Binary rce is not found in comp table I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0xba400000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 9437184 I> Binary@ device:3/0 block-37888 (partition size: 0x900000), name: A_dce-fw E> Binary dce is not found in comp table I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0xba100000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-59520 (partition size: 0x200000), name: A_adsp-fw E> Binary ape is not found in comp table I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0xc6000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-10368 (partition size: 0x40000), name: A_xusb-fw E> Binary xusb is not found in comp table I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0xbb400000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0xba500000 I> Task: Carveout setup (0x50014018) I> Program remaining OEM carveouts I> Task: Restore XUSB sec (0x50001c30) I> Task: OEM firewalls (0x50017ee0) I> MB2-BCT Firewall data is empty I> Task: Unhalt AUXPs (0x5001ace4) I> Unhalting SPE.. I> Enabling combined UART ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 9f1f07bc2d4b6509c13554672acefaad spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x5000e660) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0xbb000000 SIZE:0x400000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: a796142-39d6527-74ÿáI> Received ACK from pscÿç90c54-d ev INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 INFO: pllpsc is already locked. INFO: MONITOR: user task addr:0xbb022000, blob offset:0x00020000 ÿâ ÿá I> Task: Start secure NOR provision (0x50010b3c) I> Task: Load FSI keyblob (0x5000ea28) I> Skipping FSI key blob copy I> Task: Enable FSITHERM (0x5000e5b4) I> Task: Unhalt AUXPs (0x5001acec) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5000f7c4) I> Task: Load TOS (0x5000fe50) I> Task: Load and authenticate registered FWs (0x50012818) I> Scratch RSV109: 0x000000ÿå[ 2.443014] Camera-FW on t234-rce-safe started TCU early console enabled.ÿçINFO: MONITOR: populated user images:16 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ÿá01 active chain: 0 I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-17920 (partition size: 0x380000), name: A_cpu-bootlo ader ÿå ÿâbpmp: init bpmp: base binary md5 is f0425a554b39d571b1bbb5291283d946 bpmp: combined binary md5 is 43f75b5aad2b8e1992e4e049bafc8696 bpmp: firmware tag is 43f75b5aad2b8e1992e4-f0425a554b3 initialized vwdt initialized clk_mach_early initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 469 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized regime inivrmon_dt_init: vrmon node not found vrmÿáE> Binary cpubl is not found in comp table ÿè ÿâon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator initialized avfs_clk_platform initialized powergate initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq WARNING @ [platform/drivers/clk/clk-fwk/clk-cal.c]: aon_apb is not configured by BPMP-FW WARNING @ [platform/drivers/clk/clk-fwk/clk-cal.c]: aon_cpu_nic is not configure d by BPMP-FW initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late ÿáI> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-25088 (partition ÿâ swdtimer_init: 0 reg polling star t w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post initialized clk_cal_late initialized noc_late initialized dbells initialized dmce initialized cvc initialized avfs_clk_mach_post initialized pm_post initialized ÿásize: 0x400000), name: A_secure-os ÿâavfs_clk_platform_post initialized cvc_late initialized rm initialized console_late initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fusÿå[ 2.675349] Camera-FW on t234-rce-safe ready SHA1=ab261c6c (crt 16.906 ms,ÿâe_late initialized extras_post bpmp: init complete ÿáE> Binary tos is not found in comp table ÿå total boot 250.295 ms) ÿáI> MB2-params @ 0x40060000 I> CPUBL-params @ 0xc2000000 ÿèDCE: FW Boot Done ÿáI> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0xba800000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xbeee7000 I> Task: Prepare TOS params (0x5000fdcc) I> Task: OEM SC7 context save (0x50010878) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x5001ad78) I> Task: Program display sticky bits (0x5001acf4) I> Task: Storage device deinit (0x50001ca4) I> Task: SMMU init (0x5001a738) I> Task: Program CBB PCIE AMAP regions (0x500031dc) I> Task: Program GICv3 registers (0x5001ae18) I> Task: Audit firewall settings (0x5001816c) I> MB2 finished ÿäNOTICE: BL31: v2.5(release):ef8af0b99 NOTICE: BL31: Built : 20:58:00, May 16 2022 ERROR: Error initializing runtime service trusty_fast ÿá Jetson UEFI firmware (version r34.1-975eef6 built on 2022-05-16T20:58:45-07:00 ) ** WARNING: Test Key is used. ** L4T boot options 0: primary kernel 1: backup kernel Press 0-1 to boot selection within 3.0 seconds. Press any other key to boot default (Option: 1) EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.65-tegra (root@iei-Precision-3640-Tower) (aarc h64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08-14-ge5a2a90) 9.3.0, GNU l d (GNU Binutils) 2.33.1) #6 SMP PREEMPT Fri Jul 15 11:24:31 CST 2022 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] [ 0.000000] CUSTOM_BOARD_EN [ 0.000000] release_kernel_version: R001 [ 0.000000] release_dtb_version: 20220712 [ 0.000000] Machine model: CUSTOM_IEI [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x854781898 SMBIOS=0xbabc0000 SMBIOS 3.0=0x853220000 MEMATTR=0x852f42018 ESRT=0x8531c3b98 RNG=0x85435ff18 MEMRESERVE=0x852f44f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008531c3b98 to 0x000000085 31c3bd0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000086b800000, s ize 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible i d nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node fsi-carveout, compatible id nv idia,fsi-carveout [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nv idia,vpr-carveout [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087ffffff] [ 0.000000] node 0: [mem 0x0000000088000000-0x00000000b9ccffff] [ 0.000000] node 0: [mem 0x00000000ba800000-0x00000000ba9affff] [ 0.000000] node 0: [mem 0x00000000babb0000-0x00000000babcffff] [ 0.000000] node 0: [mem 0x00000000babd0000-0x00000000babfffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000c3ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000084fffffff] [ 0.000000] node 0: [mem 0x0000000850000000-0x0000000851faffff] [ 0.000000] node 0: [mem 0x0000000851fb0000-0x0000000852cf2fff] [ 0.000000] node 0: [mem 0x0000000852cf3000-0x0000000852e54fff] [ 0.000000] node 0: [mem 0x0000000852e55000-0x0000000852edffff] [ 0.000000] node 0: [mem 0x0000000852ee0000-0x0000000852efffff] [ 0.000000] node 0: [mem 0x0000000852f00000-0x000000085317ffff] [ 0.000000] node 0: [mem 0x0000000853180000-0x000000085319ffff] [ 0.000000] node 0: [mem 0x00000008531a0000-0x000000085320ffff] [ 0.000000] node 0: [mem 0x0000000853210000-0x000000085322ffff] [ 0.000000] node 0: [mem 0x0000000853230000-0x0000000853ceffff] [ 0.000000] node 0: [mem 0x0000000853cf0000-0x0000000853f1ffff] [ 0.000000] node 0: [mem 0x0000000853f20000-0x0000000853fdffff] [ 0.000000] node 0: [mem 0x0000000853fe0000-0x000000085411ffff] [ 0.000000] node 0: [mem 0x0000000854120000-0x000000085418ffff] [ 0.000000] node 0: [mem 0x0000000854190000-0x000000085424ffff] [ 0.000000] node 0: [mem 0x0000000854250000-0x000000085425ffff] [ 0.000000] node 0: [mem 0x0000000854260000-0x00000008542fffff] [ 0.000000] node 0: [mem 0x0000000854300000-0x000000085434ffff] [ 0.000000] node 0: [mem 0x0000000854350000-0x000000085435ffff] [ 0.000000] node 0: [mem 0x0000000854360000-0x00000008543affff] [ 0.000000] node 0: [mem 0x00000008543b0000-0x000000085456ffff] [ 0.000000] node 0: [mem 0x0000000854570000-0x000000085457ffff] [ 0.000000] node 0: [mem 0x0000000854580000-0x000000085465ffff] [ 0.000000] node 0: [mem 0x0000000854660000-0x00000008546dffff] [ 0.000000] node 0: [mem 0x00000008546e0000-0x000000085477ffff] [ 0.000000] node 0: [mem 0x0000000854780000-0x000000085485ffff] [ 0.000000] node 0: [mem 0x0000000854860000-0x00000008548affff] [ 0.000000] node 0: [mem 0x00000008548b0000-0x000000085493ffff] [ 0.000000] node 0: [mem 0x0000000854940000-0x000000085498ffff] [ 0.000000] node 0: [mem 0x0000000854990000-0x00000008549affff] [ 0.000000] node 0: [mem 0x00000008549b0000-0x0000000854a4ffff] [ 0.000000] node 0: [mem 0x0000000854a50000-0x0000000854aaffff] [ 0.000000] node 0: [mem 0x0000000854ab0000-0x0000000854b9ffff] [ 0.000000] node 0: [mem 0x0000000854ba0000-0x000000085537ffff] [ 0.000000] node 0: [mem 0x0000000855380000-0x000000085555ffff] [ 0.000000] node 0: [mem 0x0000000855560000-0x000000087b8bffff] [ 0.000000] node 0: [mem 0x000000087b8c0000-0x000000087b90ffff] [ 0.000000] node 0: [mem 0x000000087b910000-0x000000087fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000087fffffff] [ 0.000000] On node 0, zone DMA: 304 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 80 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 31 pages/cpu s90008 r8192 d28776 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel conf iguration [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7983060 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=e xt4 mminit_loglevel=4 console=ttyTCU0,115200 console=tty0 firmware_class.path=/e tc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 byt es, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 byte s, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000a9cd0000-0x00000000b9cd000 0] (256MB) [ 0.000000] Memory: 31083448K/32439104K available (18432K kernel code, 3212K rwdata, 7084K rodata, 3968K init, 1088K bss, 1093512K reserved, 262144K cma-rese rved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jif fies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] random: get_random_bytes called from start_kernel+0x378/0x4f4 wit h crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 43980 46511088ns [ 0.000628] Console: colour dummy device 80x25 [ 0.000834] printk: console [tty0] enabled [ 0.000873] Calibrating delay loop (skipped), value calculated using timer fr equency.. 62.50 BogoMIPS (lpj=125000) [ 0.000882] pid_max: default: 32768 minimum: 301 [ 0.000929] LSM: Security Framework initializing [ 0.000997] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, li near) [ 0.001041] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 byte s, linear) [ 0.002710] rcu: Hierarchical SRCU implementation. [ 0.002802] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003354] DTS File Name: /home/HD2/NVDIA_DATA/Tegra186_git_3410_org/tegra18 6/Linux_for_Tegra/sources/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../ ../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-00 00.dts [ 0.003364] DTB Build time: Jul 15 2022 11:26:45 [ 0.004451] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.004568] Remapping and enabling EFI services. [ 0.005744] smp: Bringing up secondary CPUs ... [ 0.006140] Detected PIPT I-cache on CPU1 [ 0.006171] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.006201] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.006560] Detected PIPT I-cache on CPU2 [ 0.006571] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.006585] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.006899] Detected PIPT I-cache on CPU3 [ 0.006908] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.006922] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.009257] Detected PIPT I-cache on CPU4 [ 0.009278] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c000 0 [ 0.009304] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.009677] Detected PIPT I-cache on CPU5 [ 0.009687] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e000 0 [ 0.009700] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.010040] Detected PIPT I-cache on CPU6 [ 0.010050] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f50000 0 [ 0.010063] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.010411] Detected PIPT I-cache on CPU7 [ 0.010420] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f52000 0 [ 0.010433] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.012768] Detected PIPT I-cache on CPU8 [ 0.012790] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f54000 0 [ 0.012819] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.013187] Detected PIPT I-cache on CPU9 [ 0.013197] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f56000 0 [ 0.013211] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.013558] Detected PIPT I-cache on CPU10 [ 0.013568] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f5800 00 [ 0.013583] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.013920] Detected PIPT I-cache on CPU11 [ 0.013930] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a00 00 [ 0.013945] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.013997] smp: Brought up 1 node, 12 CPUs [ 0.014060] SMP: Total of 12 processors activated. [ 0.014064] CPU features: detected: Privileged Access Never [ 0.014067] CPU features: detected: LSE atomic instructions [ 0.014070] CPU features: detected: User Access Override [ 0.014072] CPU features: detected: 32-bit EL0 Support [ 0.014075] CPU features: detected: Common not Private translations [ 0.014078] CPU features: detected: RAS Extension Support [ 0.014080] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.014084] CPU features: detected: CRC32 instructions [ 0.014087] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.048083] CPU: All CPU(s) started at EL2 [ 0.050330] devtmpfs: initialized [ 0.059444] Registered cp15_barrier emulation handler [ 0.059462] Registered setend emulation handler [ 0.059468] KASLR enabled [ 0.059597] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns [ 0.059610] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.061165] pinctrl core: initialized pinctrl subsystem [ 0.061608] SMBIOS 3.0.0 present. [ 0.061615] DMI: /, BIOS r34.1-975eef6 05/16/2022 [ 0.061847] NET: Registered protocol family 16 [ 0.062713] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.062922] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic all ocations [ 0.063121] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic a llocations [ 0.063183] audit: initializing netlink subsys (disabled) [ 0.063270] audit: type=2000 audit(0.060:1): state=initialized audit_enabled= 0 res=1 [ 0.063893] printk: console [ramoops-1] enabled [ 0.063899] pstore: Registered ramoops as persistent store backend [ 0.063905] ramoops: using 0x200000@0xba9b0000, ecc: 0 [ 0.064061] thermal_sys: Registered thermal governor 'step_wise' [ 0.064062] thermal_sys: Registered thermal governor 'power_allocator' [ 0.064069] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.065519] cpuidle: using governor menu [ 0.065633] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.065745] ASID allocator initialised with 65536 entries [ 0.065889] Serial: AMBA PL011 UART driver [ 0.067286] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.067311] Tegra reboot handler registered. [ 0.067386] DTS File Name: /home/HD2/NVDIA_DATA/Tegra186_git_3410_org/tegra18 6/Linux_for_Tegra/sources/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../ ../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-00 00.dts [ 0.067396] DTB Build time: Jul 15 2022 11:26:45 [ 0.081517] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c10000 [ 0.081536] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c20000 [ 0.081546] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c30000 [ 0.081557] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c40000 [ 0.081566] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c50000 [ 0.081574] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b80000 [ 0.081582] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b90000 [ 0.081591] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2ba0000 [ 0.081600] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2bb0000 [ 0.081608] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1700000 [ 0.081615] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1710000 [ 0.081623] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1720000 [ 0.081633] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1730000 [ 0.081641] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1740000 [ 0.081649] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1750000 [ 0.081657] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1760000 [ 0.081665] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1770000 [ 0.081675] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.081695] mc-err: mcerr ops are set to t23x [ 0.081967] tegra23x-cbb 13a00000.cbb-en: secure_irq = 21 [ 0.082015] tegra23x-cbb c600000.aon-en: secure_irq = 22 [ 0.082053] tegra23x-cbb de00000.dce-en: secure_irq = 23 [ 0.082087] tegra23x-cbb be00000.rce-en: secure_irq = 24 [ 0.082123] tegra23x-cbb b600000.sce-en: secure_irq = 25 [ 0.085866] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.085879] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.085884] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085889] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.087300] ACPI: Interpreter disabled. [ 0.088409] vdd-av1v1-hub: supplied by vdd-5v-sys [ 0.088511] vbusA-cvb: supplied by vdd-5v-sys [ 0.088600] vbusB-cvb: supplied by vdd-5v-sys [ 0.088710] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 0.088802] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 0.089082] iommu: Default domain type: Translated [ 0.089122] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.089278] SCSI subsystem initialized [ 0.089339] usbcore: registered new interface driver usbfs [ 0.089355] usbcore: registered new interface driver hub [ 0.089372] usbcore: registered new device driver usb [ 0.089540] mc: Linux media interface: v0.10 [ 0.089551] videodev: Linux video capture interface: v2.00 [ 0.089690] pps_core: LinuxPPS API ver. 1 registered [ 0.089697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.089706] PTP clock support registered [ 0.089903] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.089944] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.091259] Registered efivars operations [ 0.091693] FPGA manager framework [ 0.091904] Advanced Linux Sound Architecture Driver Initialized. [ 0.092162] Bluetooth: Core ver 2.22 [ 0.092180] NET: Registered protocol family 31 [ 0.092186] Bluetooth: HCI device and connection manager initialized [ 0.092195] Bluetooth: HCI socket layer initialized [ 0.092202] Bluetooth: L2CAP socket layer initialized [ 0.092212] Bluetooth: SCO socket layer initialized [ 0.092735] camchar: rtcpu character device driver loaded [ 0.092982] clocksource: Switched to clocksource arch_sys_counter [ 0.250120] VFS: Disk quotas dquot_6.6.0 [ 0.250160] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.250268] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.250516] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x 00000000bf000000,16777216 [ 0.250530] tegra-carveouts tegra-carveouts: assigned reserved memory node fs i-carveout [ 0.250544] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x 00000000d6000000,704643072 [ 0.250549] pnp: PnP ACPI: disabled [ 0.250557] nvmap_page_pool_init: Total RAM pages: 7836398 [ 0.250562] nvmap_page_pool_init: nvmap page pool size: 979549 pages (3826 MB ) [ 0.250607] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.250705] misc nvmap: created heap vpr base 0x00000000d6000000 size (688128 KiB) [ 0.252154] la/ptsa driver initialized. [ 0.252205] NET: Registered protocol family 2 [ 0.252432] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, li near) [ 0.254224] misc nvmap: created heap fsi base 0x00000000bf000000 size (16384K iB) [ 0.254541] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262 144 bytes, linear) [ 0.254601] TCP established hash table entries: 262144 (order: 9, 2097152 byt es, linear) [ 0.254802] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, line ar) [ 0.255269] TCP: Hash tables configured (established 262144 bind 65536) [ 0.255342] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.255401] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linea r) [ 0.255528] NET: Registered protocol family 1 [ 0.255744] RPC: Registered named UNIX socket transport module. [ 0.255753] RPC: Registered udp transport module. [ 0.255758] RPC: Registered tcp transport module. [ 0.255763] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.255773] PCI: CLS 0 bytes, default 64 [ 0.255866] Trying to unpack rootfs image as initramfs... [ 0.364773] Freeing initrd memory: 8196K [ 0.366462] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av ailable [ 0.366622] kvm [1]: IPA Size Limit: 48 bits [ 0.366781] kvm [1]: VHE mode initialized successfully [ 0.367381] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 0.368758] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.368959] NFS: Registering the id_resolver key type [ 0.368991] Key type id_resolver registered [ 0.368996] Key type id_legacy registered [ 0.369023] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.369034] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 0.369048] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.380485] NET: Registered protocol family 38 [ 0.380508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 39) [ 0.380564] io scheduler mq-deadline registered [ 0.380570] io scheduler kyber registered [ 0.383886] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.383914] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.383933] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.383949] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.386025] tegra_dc_assign_hw_data: no matching compatible node [ 0.386034] tegradccommon module_init failed [ 0.386041] tegradc module_init failed [ 0.386046] [TEGRA-EDID]tegra_edid_init:: [ 0.386265] EINJ: ACPI disabled. [ 0.387450] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.387461] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 0.387467] tegra-pmc: ### PMC reset level: L0 [ 0.387472] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.388502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.392623] random: fast init done [ 0.392851] printk: console [ttyTCU0] enabled [ 2.229784] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.235713] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.240271] arm-smmu 12000000.iommu: stage 1 translation [ 2.245784] arm-smmu 12000000.iommu: stage 2 translation [ 2.251106] arm-smmu 12000000.iommu: nested translation [ 2.256267] arm-smmu 12000000.iommu: stream matching with 128 registe r groups [ 2.263443] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 onl y) [ 2.271723] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.276479] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.283039] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.290170] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.296079] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.300803] arm-smmu 10000000.iommu: stage 1 translation [ 2.306319] arm-smmu 10000000.iommu: stage 2 translation [ 2.311739] arm-smmu 10000000.iommu: nested translation [ 2.317169] arm-smmu 10000000.iommu: stream matching with 128 registe r groups [ 2.324341] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 onl y) [ 2.332661] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.337554] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.344115] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.351034] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.357245] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.361970] arm-smmu 8000000.iommu: stage 1 translation [ 2.367478] arm-smmu 8000000.iommu: stage 2 translation [ 2.372903] arm-smmu 8000000.iommu: nested translation [ 2.378067] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.385241] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.393576] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.398458] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.405016] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.412132] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe su ccessful [ 2.420820] tegra_profiler: version: 1.146, samples/io: 49/28 [ 2.425227] tegra_profiler: auth: init [ 2.429620] [SPIDEV]spidev_init:: [ 2.432625] spi-tegra114 3210000.spi: Adding to iommu group 0 [ 2.438138] [SPI_TEGRA114]tegra_spi_probe: [ 2.442041] [SPI_TEGRA114]tegra_spi_parse_dt: [ 2.446587] spi-tegra114 3210000.spi: can not get clock [ 2.451619] spi-tegra114 3230000.spi: Adding to iommu group 0 [ 2.457351] [SPI_TEGRA114]tegra_spi_probe: [ 2.461369] [SPI_TEGRA114]tegra_spi_parse_dt: [ 2.465752] spi-tegra114 3230000.spi: can not get clock [ 2.471188] tegra23x-qspi 3270000.spi: Adding to iommu group 1 [ 2.477545] libphy: Fixed MDIO Bus: probed [ 2.481138] tun: Universal TUN/TAP device driver, 1.6 [ 2.486733] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - versio n [ 2.493658] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.498921] e1000e: Intel(R) PRO/1000 Network Driver [ 2.503890] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.509850] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.515265] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.521195] PPP generic driver version 2.4.2 [ 2.525544] PPP BSD Compression module registered [ 2.530147] PPP Deflate Compression module registered [ 2.535316] PPP MPPE Compression module registered [ 2.540307] usbcore: registered new interface driver r8152 [ 2.545636] usbcore: registered new interface driver asix [ 2.551066] usbcore: registered new interface driver ax88179_178a [ 2.557189] usbcore: registered new interface driver cdc_ether [ 2.563136] usbcore: registered new interface driver net1080 [ 2.568735] usbcore: registered new interface driver cdc_subset [ 2.574774] usbcore: registered new interface driver zaurus [ 2.580466] usbcore: registered new interface driver cdc_ncm [ 2.586147] usbcore: registered new interface driver aqc111 [ 2.591664] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.597872] ohci-pci: OHCI PCI platform driver [ 2.602166] ohci-platform: OHCI generic platform driver [ 2.607491] tegra-xusb 3610000.xhci: Adding to iommu group 2 [ 2.613426] usbcore: registered new interface driver uas [ 2.618446] usbcore: registered new interface driver usb-storage [ 2.624413] tegra-xudc 3550000.xudc: Adding to iommu group 3 [ 2.630151] mousedev: PS/2 mouse device common for all mice [ 2.635596] usbcore: registered new interface driver xpad [ 2.642802] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.646358] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:2 0 UTC (20) [ 2.654139] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.660368] i2c /dev entries driver [ 2.663954] tegra-i2c 3160000.i2c: Adding to iommu group 0 [ 2.669405] tegra-i2c c240000.i2c: Adding to iommu group 0 [ 2.674938] tegra-i2c 3180000.i2c: Adding to iommu group 0 [ 2.680334] tegra-i2c 3190000.i2c: Adding to iommu group 0 [ 2.685671] tegra-i2c 31b0000.i2c: Adding to iommu group 0 [ 2.691177] tegra-i2c 31c0000.i2c: Adding to iommu group 0 [ 2.696605] tegra-i2c c250000.i2c: Adding to iommu group 0 [ 2.701956] tegra-i2c 31e0000.i2c: Adding to iommu group 0 [ 2.709054] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not ena bled endpoint. [ 2.715556] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not ena bled endpoint. [ 2.724617] device-mapper: uevent: version 1.0.3 [ 2.728489] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-d evel@redhat.com [ 2.737741] sdhci: Secure Digital Host Controller Interface driver [ 2.743205] sdhci: Copyright(c) Pierre Ossman [ 2.747666] Synopsys Designware Multimedia Card Interface Driver [ 2.753774] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.759604] sdhci-tegra 3460000.sdhci: Adding to iommu group 4 [ 2.759753] sdhci-tegra 3400000.sdhci: Adding to iommu group 5 [ 2.765810] pstore: ignoring unexpected backend 'efi' [ 2.777072] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.784134] tegra-bpmp bpmp: firmware: 43f75b5aad2b8e1992e4-f0425a554b3 ÿâdebugfs initialized ÿá[ 3.872713] hid: raw HID events driver (C) Jiri Kosina [ 3.873287] usbcore: registered new interface driver usbhid [ 3.873443] usbhid: USB HID core driver [ 3.873755] tegra-dce d800000.dce: Adding to iommu group 6 [ 3.875161] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch _type [2] [ 3.876451] dce: dce_wait_boot_complete:100 dce is ready to receive bootstra p commands [ 3.876566] tegra234-aon c000000.aon: Adding to iommu group 7 [ 3.877081] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple ti mes for MB : [0x5] [ 3.877438] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 3.877711] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple ti mes for MB : [0x1] [ 3.877788] c000000.aon:hsp: probed [ 3.877973] dce: dce_admin_setup_clients_ipc:480 Channel Reset Complete for Type [1] ... [ 3.878297] tegra234-aon c000000.aon: init done [ 3.878426] dce: dce_admin_setup_clients_ipc:456 Get queue info failed for [ 2] [ 3.878504] tegra23x-psc e860000.psc: Adding to iommu group 8 [ 3.878721] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple ti mes for MB : [0x2] [ 3.879032] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 3.886054] dce: dce_admin_setup_clients_ipc:480 Channel Reset Complete for Type [3] ... [ 3.892369] tegra23x-psc e860000.psc: init done [ 3.900728] dce: dce_worker:209 DCE_BOOT_DONE [ 3.905320] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 9 [ 3.917118] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA =0xbff00000 [ 3.932284] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0x bfee01ff size=131584 [ 3.933230] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[ 16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.944545] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x 448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.955337] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x 8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.966365] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver =0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.978038] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver =0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.990528] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[ 1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.002239] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (115) [ 4.008628] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is succ essful [ 4.021047] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=ab261c6cb44ef92b00c3f83a96d5951f9ccd0c06 [ 4.029408] t19x_cache tegra-cache: probed [ 4.031976] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 4.053951] nvpmodel: initialized successfully [ 4.054320] tegra_hv: get_hvd: not initialized yet [ 4.054398] random: crng init done [ 4.054458] user_ivc_mempool: hypervisor not present [ 4.055913] usbcore: registered new interface driver snd-usb-audio [ 4.062404] u32 classifier [ 4.064703] input device check on [ 4.068295] Actions configured [ 4.071834] Initializing XFRM netlink socket [ 4.076242] NET: Registered protocol family 10 [ 4.081440] Segment Routing with IPv6 [ 4.083985] NET: Registered protocol family 17 [ 4.088436] NET: Registered protocol family 15 [ 4.092923] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.106408] Bluetooth: RFCOMM socket layer initialized [ 4.110931] Bluetooth: RFCOMM ver 1.11 [ 4.114678] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.120711] Bluetooth: HIDP socket layer initialized [ 4.126576] 9pnet: Installing 9P2000 support [ 4.130114] Key type dns_resolver registered [ 4.135385] registered taskstats version 1 [ 4.138874] pstore: Using crash dump compression: deflate [ 4.144123] tegra194-pcie 14100000.pcie: Adding to iommu group 10 [ 4.155363] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 4.157031] tegra194-pcie 14160000.pcie: Adding to iommu group 11 [ 4.167790] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 4.169417] tegra194-pcie 141a0000.pcie: Adding to iommu group 12 [ 4.179865] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 4.201106] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 0 [ 4.202285] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 4.202639] host1x 13e40000.host1x: Adding to iommu group 13 [ 5.210525] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 5.222458] host1x 13e40000.host1x: initialized [ 5.222932] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu gro up 14 [ 5.223439] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (stream id=53, iommu=smmu.0x0000000012000000) [ 5.225022] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu gro up 15 [ 5.225435] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (stream id=54, iommu=smmu.0x0000000012000000) [ 5.226990] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu gro up 16 [ 5.227390] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (stream id=55, iommu=smmu.0x0000000012000000) [ 5.228926] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu gro up 17 [ 5.229383] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (stream id=56, iommu=smmu.0x0000000012000000) [ 5.230938] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu gro up 18 [ 5.231350] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (stream id=57, iommu=smmu.0x0000000012000000) [ 5.232900] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu gro up 19 [ 5.233317] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (stream id=58, iommu=smmu.0x0000000012000000) [ 5.244507] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu gro up 20 [ 5.251036] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (stream id=59, iommu=smmu.0x0000000012000000) [ 5.262559] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu gro up 21 [ 5.269089] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (stream id=60, iommu=smmu.0x0000000012000000) [ 5.280575] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu gro up 22 [ 5.287140] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (stream id=53, iommu=smmu.0x0000000008000000) [ 5.298580] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu gro up 23 [ 5.305183] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (stream id=54, iommu=smmu.0x0000000008000000) [ 5.316615] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu gro up 24 [ 5.323124] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (stream id=55, iommu=smmu.0x0000000008000000) [ 5.334617] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu gro up 25 [ 5.341194] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (stream id=56, iommu=smmu.0x0000000008000000) [ 5.352649] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu gro up 26 [ 5.359201] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (stream id=57, iommu=smmu.0x0000000008000000) [ 5.370666] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu gro up 27 [ 5.377235] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (stream id=58, iommu=smmu.0x0000000008000000) [ 5.388679] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu gro up 28 [ 5.395234] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (stream id=59, iommu=smmu.0x0000000008000000) [ 5.406715] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu gro up 29 [ 5.413288] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (stream id=60, iommu=smmu.0x0000000008000000) [ 5.424770] falcon 15340000.vic: Adding to iommu group 30 [ 5.436181] falcon 15340000.vic: initialized [ 5.436525] falcon 15380000.nvjpg: Adding to iommu group 31 [ 5.443331] falcon 15380000.nvjpg: initialized [ 5.443556] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 5.453357] falcon 15540000.nvjpg1: initialized [ 5.454114] falcon 154c0000.nvenc: Adding to iommu group 33 [ 5.466806] falcon 154c0000.nvenc: initialized [ 5.467032] falcon 15a50000.ofa: Adding to iommu group 34 [ 5.474022] falcon 15a50000.ofa: initialized [ 5.474254] nvdec 15480000.nvdec: Adding to iommu group 35 [ 5.490893] nvdec 15480000.nvdec: initialized [ 5.491106] tsec 15500000.tsec: Adding to iommu group 36 [ 5.498697] tsec 15500000.tsec: initialized [ 5.500874] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.506970] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.513997] gpio-394 (camera-control-output-low): hogged as output/low [ 5.514190] gpio-397 (camera-control-output-low): hogged as output/low [ 5.520006] gpio-487 (camera-control-output-low): hogged as output/low [ 5.526214] gpio-486 (camera-control-output-low): hogged as output/low [ 5.533638] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 5.539362] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 5.545753] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.552526] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 5.557895] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.563184] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.570474] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 5.576790] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 5.585213] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disa bled due to no IOMMU [ 5.591791] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 5.598125] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 5.605752] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 5.612866] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 5.621872] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 5.628152] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: grid-of-semaphores not supported [ 5.636254] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 5.645549] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 5.652034] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: grid-of-semaphores not supported [ 5.660485] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.670619] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 5.676369] scare-pigeon 13e40000.host1x:isp-thi@14b00000: grid-of-semaphores not supported [ 5.684932] pva 16000000.pva0: Adding to iommu group 40 [ 5.710860] pva 16000000.pva0: initialized [ 5.718214] nvdla 15880000.nvdla0: Adding to iommu group 41 [ 5.727035] nvdla 15880000.nvdla0: initialized [ 5.728728] nvdla 158c0000.nvdla1: Adding to iommu group 42 [ 5.736752] nvdla 158c0000.nvdla1: initialized [ 5.738419] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.738604] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.738947] serial-tegra 3100000.serial: Adding to iommu group 0 [ 5.739410] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 5.742675] serial-tegra 3130000.serial: Adding to iommu group 0 [ 5.748612] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 5.757480] [SPI_TEGRA114]tegra_spi_probe: [ 5.761344] [SPI_TEGRA114]tegra_spi_parse_dt: [ 5.765937] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 5.771007] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 5.776294] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 5.780844] [SPI_TEGRA114]tegra_spi_probe: [ 5.784608] [SPI_TEGRA114]tegra_spi_parse_dt: [ 5.789062] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 5.793789] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 5.799186] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 5.804489] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 5.808980] [SPIDEV]spidev_probe:: [ 5.811980] [SPIDEV]spidev_probe_acpi:: [ 5.815947] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 5.821151] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 5.825952] [SPIDEV]spidev_probe:: [ 5.829043] [SPIDEV]spidev_probe_acpi:: [ 5.832924] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 5.860450] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 5.860717] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.860885] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus num ber 1 [ 5.861902] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 5.869750] tegra-xusb 3610000.xhci: irq 232, io mem 0x03610000 [ 5.875968] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 5.883995] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.891342] usb usb1: Product: xHCI Host Controller [ 5.896241] usb usb1: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 5.902190] usb usb1: SerialNumber: 3610000.xhci [ 5.907198] hub 1-0:1.0: USB hub found [ 5.910878] hub 1-0:1.0: 4 ports detected [ 5.915078] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.920310] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus num ber 2 [ 5.927921] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpee d [ 5.935329] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.10 [ 5.943499] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.950756] usb usb2: Product: xHCI Host Controller [ 5.955740] usb usb2: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 5.961690] usb usb2: SerialNumber: 3610000.xhci [ 5.966434] hub 2-0:1.0: USB hub found [ 5.970281] hub 2-0:1.0: 4 ports detected [ 5.975528] bwmgr API not supported [ 5.975533] tegra-xusb 3610000.xhci: can't register EMC bwmgr (-22) [ 6.006533] cpufreq: cpufreq_online: CPU0: Running at unlisted initial freque ncy: 1999000 KHz, changing to: 2035200 KHz [ 6.009993] cpufreq: cpufreq_online: CPU4: Running at unlisted initial freque ncy: 2008000 KHz, changing to: 2035200 KHz [ 6.013603] cpufreq: cpufreq_online: CPU8: Running at unlisted initial freque ncy: 2073000 KHz, changing to: 2112000 KHz [ 6.020227] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.022048] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 6.023749] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 6.029118] mmc0: CQHCI version 5.10 [ 6.034932] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 6.034938] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 6.038962] irq: IRQ290: trimming hierarchy from :pmc@c360000 [ 6.046740] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 6.066291] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADM A 64-bit [ 6.069856] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 290 [ 6.165729] mmc0: Command Queue Engine enabled [ 6.165855] mmc0: periodic cache flush enabled [ 6.165975] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.166568] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 6.166730] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (510: 0) [ 6.170047] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 6.172988] usb 1-4: new high-speed USB device number 2 using tegra-xusb [ 6.342958] usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcd Device= 1.40 [ 6.343226] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.343472] usb 1-4: Product: 4-Port USB 2.0 Hub [ 6.343621] usb 1-4: Manufacturer: Generic [ 6.345792] hub 1-4:1.0: USB hub found [ 6.347205] hub 1-4:1.0: 4 ports detected [ 6.458173] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra -xusb [ 6.497996] usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcd Device= 1.40 [ 6.498234] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.498437] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.498577] usb 2-3: Manufacturer: Generic [ 6.512136] hub 2-3:1.0: USB hub found [ 6.514459] hub 2-3:1.0: 4 ports detected [ 7.154177] tegra194-pcie 14100000.pcie: Phy link never came up [ 7.154405] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 7.154588] pci_bus 0001:00: root bus resource [bus 00-ff] [ 7.154741] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus addr ess [0x30100000-0x301fffff]) [ 7.155015] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff ] (bus address [0x40000000-0x47ffffff]) [ 7.155312] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 7.155556] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 7.155833] pci 0001:00:00.0: PME# supported from D0 D3hot [ 7.161690] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 7.161842] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), M ax Read Rq 512 [ 7.162275] pcieport 0001:00:00.0: Adding to iommu group 10 [ 7.162582] pcieport 0001:00:00.0: PME: Signaling with IRQ 50 [ 7.163150] pcieport 0001:00:00.0: AER: enabled with IRQ 50 [ 7.163458] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 7.163684] pci 0001:00:00.0: Removing from iommu group 10 [ 7.163831] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 7.171044] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 7.175658] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 7.181692] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 7.190352] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 7.199007] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 8.020807] tegra-xusb 3610000.xhci: entering ELPG done [ 8.305559] tegra194-pcie 14160000.pcie: Phy link never came up [ 8.305772] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 8.305961] pci_bus 0004:00: root bus resource [bus 00-ff] [ 8.306116] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 8.306392] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 8.306682] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 8.306931] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 8.307195] pci 0004:00:00.0: PME# supported from D0 D3hot [ 8.312833] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 8.312982] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 8.313412] pcieport 0004:00:00.0: Adding to iommu group 11 [ 8.313713] pcieport 0004:00:00.0: PME: Signaling with IRQ 52 [ 8.314296] pcieport 0004:00:00.0: AER: enabled with IRQ 52 [ 8.314609] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 8.314825] pci 0004:00:00.0: Removing from iommu group 11 [ 8.314975] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 8.322540] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 8.326490] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 8.331117] avdd-cam-2v8: supplied by vdd-3v3-sys [ 8.335754] vdd-dp: supplied by vdd-3v3-sys [ 8.339981] vdd-3v3-sd: supplied by vdd-3v3-sys [ 8.344848] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 8.352320] tegra194-isp5 14800000.isp: initialized [ 8.357312] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 8.360860] (NULL device *): fops function table already registered [ 8.368803] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 8.373736] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.374054] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 8.389172] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 290 [ 8.494583] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 8.494801] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 8.495051] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 8.495287] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 9.442428] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 9.602519] tegra194-pcie 141a0000.pcie: Phy link never came up [ 9.602739] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 9.602922] pci_bus 0005:00: root bus resource [bus 00-ff] [ 9.603077] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 9.603351] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.603647] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 9.603893] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 9.604159] pci 0005:00:00.0: PME# supported from D0 D3hot [ 9.609950] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 9.610101] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.610523] pcieport 0005:00:00.0: Adding to iommu group 12 [ 9.610816] pcieport 0005:00:00.0: PME: Signaling with IRQ 54 [ 9.611309] pcieport 0005:00:00.0: AER: enabled with IRQ 54 [ 9.611625] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 9.611855] pci 0005:00:00.0: Removing from iommu group 12 [ 9.612002] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 9.619320] nvethernet 6810000.ethernet: Adding to iommu group 43 [ 9.623633] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 9.631342] nvethernet 6810000.ethernet: failed to read MDIO address [ 9.637903] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 9.644735] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 9.652475] nvethernet 6810000.ethernet: failed to get phy reset gpio error: -2 [ 9.663843] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:78:99:3a [ 9.667326] nvethernet 6810000.ethernet: Macsec not enabled [ 9.672643] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 9.681983] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 9.688245] irq: IRQ292: trimming hierarchy from :pmc@c360000 [ 9.693592] irq: IRQ293: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.701020] irq: IRQ294: trimming hierarchy from :pmc@c360000 [ 9.706635] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 9.713655] tegra-se-nvhost 15810000.se: Adding to iommu group 44 [ 9.719987] tegra-se-nvhost 15810000.se: initialized [ 9.731006] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 9.731266] tegra-se-nvhost 15820000.se: Adding to iommu group 45 [ 9.737365] tegra-se-nvhost 15820000.se: initialized [ 9.743847] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 9.748064] tegra-se-nvhost 15840000.se: Adding to iommu group 46 [ 9.754477] tegra-se-nvhost 15840000.se: initialized [ 9.761906] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 9.765935] tegra_actmon d230000.actmon: in actmon_register()... [ 9.771477] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 9.777295] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 9.785030] hvc_sysfs: hypervisor is not present [ 9.821846] ALSA device list: [ 9.821930] No soundcards found. [ 9.822578] Freeing unused kernel memory: 3968K [ 9.822738] Run /init as init process [ 9.833213] Root device found: mmcblk0p1 [ 9.833776] Found dev node: /dev/mmcblk0p1 [ 9.930286] EXT4-fs (mmcblk0p1): recovery complete [ 9.931561] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.932668] Rootfs mounted over mmcblk0p1 [ 9.939490] Switching from initrd to actual rootfs [ 10.046159] systemd[1]: System time before build time, advancing clock. [ 10.092053] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.093179] systemd[1]: Detected architecture arm64. [ 10.141620] systemd[1]: Set hostname to . [ 10.316313] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 10.316697] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 10.317599] systemd[1]: Created slice system-modprobe.slice. [ 10.318074] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 10.318483] systemd[1]: Created slice User and Session Slice. [ 10.318750] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.319200] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.319551] systemd[1]: Reached target User and Group Name Lookups. [ 10.319779] systemd[1]: Reached target Slices. [ 10.319948] systemd[1]: Reached target Swap. [ 10.320284] systemd[1]: Listening on RPCbind Server Activation Socket. [ 10.320591] systemd[1]: Listening on Syslog Socket. [ 10.320848] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.321137] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.321862] systemd[1]: Listening on Journal Audit Socket. [ 10.325913] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.332008] systemd[1]: Listening on Journal Socket. [ 10.337006] systemd[1]: Listening on udev Control Socket. [ 10.342474] systemd[1]: Listening on udev Kernel Socket. [ 10.348768] systemd[1]: Mounting Huge Pages File System... [ 10.354235] systemd[1]: Mounting POSIX Message Queue File System... [ 10.360424] systemd[1]: Mounting RPC Pipe File System... [ 10.365812] systemd[1]: Mounting Kernel Debug File System... [ 10.371563] systemd[1]: Mounting Kernel Trace File System... [ 10.377496] systemd[1]: Starting Journal Service... [ 10.382382] systemd[1]: Starting Set the console keyboard layout... [ 10.388510] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 10.396417] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 10.405446] systemd[1]: Started Nameserver information manager. [ 10.410945] systemd[1]: Reached target Network (Pre). [ 10.416547] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.424919] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.435508] systemd[1]: Starting Load Kernel Modules... [ 10.440010] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.445987] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 10.446644] systemd[1]: Starting udev Coldplug all Devices... [ 10.458195] systemd[1]: Started Journal Service. [ 10.505496] systemd-journald[302]: Received client request to flush runtime journal. [ 11.085312] loop: module loaded [ 12.298727] nvidia: loading out-of-tree module taints kernel. [ 12.330092] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 12.330092] [ 12.330336] nv_platform 13800000.display: Adding to iommu group 47 [ 12.336464] platform 13800000.display:nvdisplay-niso: Adding to iommu group 48 [ 12.355947] NVRM: loading NVIDIA UNIX Kernel Module for aarch64 34.1.1 Release Build (buildbrain@mobile-u64-5414-d7000) Mon May 16 21:12:24 PDT 2022 [ 12.377836] cpu-throttle-alert cooling device registered. [ 12.378593] gpu-throttle-alert cooling device registered. [ 12.378911] cv0-throttle-alert cooling device registered. [ 12.378982] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels [ 12.379138] cv1-throttle-alert cooling device registered. [ 12.379704] cv2-throttle-alert cooling device registered. [ 12.380076] soc0-throttle-alert cooling device registered. [ 12.380530] soc1-throttle-alert cooling device registered. [ 12.381082] soc2-throttle-alert cooling device registered. [ 12.381662] hot-surface-alert cooling device registered. [ 12.453385] irq: IRQ296: trimming hierarchy from :pmc@c360000 [ 12.453600] nct1008_nct72 4-004c: starting parse dt [ 12.453784] nct1008_nct72 4-004c: !!!Found deprecated property!!! [ 12.453980] nct1008_nct72 4-004c: success parsing dt [ 12.454216] nct1008_nct72 4-004c: success in enabling tmp451 VDD rail [ 12.490396] nct1008_nct72 4-004c: LOC shutdown limit 107 [ 12.491212] nct1008_nct72 4-004c: EXT shutdown limit 107 [ 12.512277] nvadsp 2993000.adsp: Adding to iommu group 49 [ 12.512569] nvadsp 2993000.adsp: in probe()... [ 12.513220] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 12.527850] nct1008_nct72 4-004c: initial LOC temp: 44000 [ 12.528500] nct1008_nct72 4-004c: initial EXT temp: 49000 [ 12.529610] nct1008_nct72 4-004c: hi_b:-4, lo_b:0 [ 12.530472] nct1008_nct72 4-004c: nct1008_probe: initialized [ 12.614945] qspi_mtd spi6.0: MX25U51279G (65536 Kbytes) [ 12.615115] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 12.621123] [SPI_NOR_CORE]spi_nor_probe:: [ 12.621259] [SPI_NOR_CORE]spi_nor_scan:: [ 12.621367] [SPI_NOR_CORE]spi_nor_check:: [ 12.621478] [SPI_NOR_CORE]spi_nor_get_flash_info:: [ 12.621609] [SPI_NOR_CORE]spi_nor_match_id:: [ 12.621731] [SPI_NOR_CORE]spi_nor_read_id:: [ 12.621840] [SPI_NOR_CORE]spi_nor_read_id::spi_mem_exec_op [ 12.622007] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 12.622298] [SPI_TEGRA114]tegra_spi_setup_transfer_one: [ 12.624240] [SPI_TEGRA114]tegra_spi_setup_transfer_one: [ 12.624411] spi-nor spi0.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00 [ 12.624426] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 12.624634] [SPI_NOR_CORE]spi_nor_probe:: [ 12.624831] [SPI_NOR_CORE]spi_nor_scan:: [ 12.624932] [SPI_NOR_CORE]spi_nor_check:: [ 12.625137] [SPI_NOR_CORE]spi_nor_get_flash_info:: [ 12.625268] [SPI_NOR_CORE]spi_nor_match_id:: [ 12.625390] [SPI_NOR_CORE]spi_nor_read_id:: [ 12.625496] [SPI_NOR_CORE]spi_nor_read_id::spi_mem_exec_op [ 12.629343] [SPI_TEGRA114]tegra_spi_runtime_resume: [ 12.634488] [SPI_TEGRA114]tegra_spi_setup_transfer_one: [ 12.639792] [SPI_TEGRA114]tegra_spi_setup_transfer_one: [ 12.644794] spi-nor spi0.1: unrecognized JEDEC id bytes: 00 00 00 00 00 00 [ 12.644803] [SPI_TEGRA114]tegra_spi_runtime_suspend: [ 12.737616] tegra-hda 3510000.hda: Adding to iommu group 50 [ 12.738454] tegra-asoc: sound: Adding to iommu group 49 [ 12.769446] irq: IRQ297: trimming hierarchy from :pmc@c360000 [ 12.780791] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 49 [ 12.781082] tegra210_adsp_audio_probe: platform probe started [ 12.781666] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1 [ 12.782163] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot [ 12.782596] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src [ 12.783018] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1 [ 12.783449] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec [ 12.783864] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire [ 12.784067] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found [ 12.784299] tegra210-adsp tegra210-adsp: using adma channel page 0 [ 12.784518] nvadsp 2993000.adsp: ADSP OS firmware already loaded [ 12.799124] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0 [ 12.799344] ucsi_ccg 1-0008: Port-0: no role switch found [ 12.800725] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.800933] Creating 1 MTD partitions on "spi6.0": [ 12.801076] 0x000000000000-0x000004000000 : "Whole_flash0" [ 12.824577] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input1 [ 12.824916] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input2 [ 12.825253] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input3 [ 12.826013] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input4 [ 12.888535] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0 [ 12.888748] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connector@0 [ 13.177491] using random self ethernet address [ 13.177650] using random host ethernet address [ 13.453678] using random self ethernet address [ 13.453824] using random host ethernet address [ 18.536417] [xpcs_lane_bring_up][416][type:0x4][loga-0x0] Failed to get PCS block lock [ 18.536670] [xpcs_init][451][type:0x4][loga-0x0] TX/RX lane bring-up failed [ 18.536884] [mgbe_set_speed][4220][type:0x4][loga-0x0] xpcs_init failed Ubuntu 20.04.4 LTS user-desktop ttyTCU0 user-desktop login: