[ 0.000000] Booting Linux on physical CPU 0x0000010200 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6289-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Sun Mar 19 07:55:28 PDT 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin Nano Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x20b5bdf18 SMBIOS=0xffff0000 SMBIOS 3.0=0x20a560000 MEMATTR=0x20ac5e018 ESRT=0x20ac6f898 RNG=0x22dd3dd18 MEMRESERVE=0x20ac5ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000020ac6f898 to 0x000000020ac6f8d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000021dc00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000237ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002075fffff] [ 0.000000] node 0: [mem 0x0000000207600000-0x000000020762ffff] [ 0.000000] node 0: [mem 0x0000000207630000-0x0000000207e7cfff] [ 0.000000] node 0: [mem 0x0000000207e7d000-0x000000020a1bffff] [ 0.000000] node 0: [mem 0x000000020a1c0000-0x000000020a4fffff] [ 0.000000] node 0: [mem 0x000000020a500000-0x000000020a50ffff] [ 0.000000] node 0: [mem 0x000000020a510000-0x000000020a55ffff] [ 0.000000] node 0: [mem 0x000000020a560000-0x000000020a56ffff] [ 0.000000] node 0: [mem 0x000000020a570000-0x000000020a76ffff] [ 0.000000] node 0: [mem 0x000000020a770000-0x000000020a7bffff] [ 0.000000] node 0: [mem 0x000000020a7c0000-0x000000020a8affff] [ 0.000000] node 0: [mem 0x000000020a8b0000-0x000000020a8fffff] [ 0.000000] node 0: [mem 0x000000020a900000-0x000000020aa7ffff] [ 0.000000] node 0: [mem 0x000000020aa80000-0x000000020abbffff] [ 0.000000] node 0: [mem 0x000000020abc0000-0x000000020ac6ffff] [ 0.000000] node 0: [mem 0x000000020ac70000-0x000000020af0ffff] [ 0.000000] node 0: [mem 0x000000020af10000-0x000000020af3ffff] [ 0.000000] node 0: [mem 0x000000020af40000-0x000000020b02ffff] [ 0.000000] node 0: [mem 0x000000020b030000-0x000000020b03ffff] [ 0.000000] node 0: [mem 0x000000020b040000-0x000000020b08ffff] [ 0.000000] node 0: [mem 0x000000020b090000-0x000000020b58ffff] [ 0.000000] node 0: [mem 0x000000020b590000-0x000000020b59ffff] [ 0.000000] node 0: [mem 0x000000020b5a0000-0x000000020b6affff] [ 0.000000] node 0: [mem 0x000000020b6b0000-0x000000020b74ffff] [ 0.000000] node 0: [mem 0x000000020b750000-0x000000020b84ffff] [ 0.000000] node 0: [mem 0x000000020b850000-0x000000020b8effff] [ 0.000000] node 0: [mem 0x000000020b8f0000-0x000000020b9effff] [ 0.000000] node 0: [mem 0x000000020b9f0000-0x000000020ba8ffff] [ 0.000000] node 0: [mem 0x000000020ba90000-0x000000020c35ffff] [ 0.000000] node 0: [mem 0x000000020c360000-0x000000020c53ffff] [ 0.000000] node 0: [mem 0x000000020c540000-0x000000022dceffff] [ 0.000000] node 0: [mem 0x000000022dcf0000-0x000000022dd3ffff] [ 0.000000] node 0: [mem 0x000000022dd40000-0x00000002317fffff] [ 0.000000] node 0: [mem 0x0000000231a00000-0x0000000231e0ffff] [ 0.000000] node 0: [mem 0x0000000236000000-0x0000000237ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000237ffffff] [ 0.000000] On node 0 totalpages: 1784848 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:63 [ 0.000000] Normal zone: 19968 pages used for memmap [ 0.000000] Normal zone: 1260560 pages, LIFO batch:63 [ 0.000000] On node 0, zone Normal: 496 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] pcpu-alloc: s90200 r8192 d32680 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1756688 [ 0.000000] Kernel command line: root=/dev/mmcblk1p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 6360896K/7139392K available (18496K kernel code, 3168K rwdata, 7172K rodata, 3968K init, 1418K bss, 516352K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 10200 region 0:0x000000000f500000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000670] Console: colour dummy device 80x25 [ 0.000711] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000718] pid_max: default: 32768 minimum: 301 [ 0.000777] LSM: Security Framework initializing [ 0.000801] Yama: becoming mindful. [ 0.000820] SELinux: Initializing. [ 0.000883] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000897] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001589] /cpus/cpu-map: empty cluster [ 0.001886] rcu: Hierarchical SRCU implementation. [ 0.001969] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002387] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/tegra234-p3767-0003-p3768-0000-a0.dts [ 0.002392] DTB Build time: Mar 19 2023 08:08:40 [ 0.003637] Tegra Revision: A01 SKU: 0xd5 CPU Process: 0 SoC Process: 0 [ 0.003805] Remapping and enabling EFI services. [ 0.005016] smp: Bringing up secondary CPUs ... [ 0.033702] Detected PIPT I-cache on CPU1 [ 0.033741] GICv3: CPU1: found redistributor 10300 region 0:0x000000000f520000 [ 0.033775] CPU1: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.064472] Detected PIPT I-cache on CPU2 [ 0.064497] GICv3: CPU2: found redistributor 20000 region 0:0x000000000f540000 [ 0.064526] CPU2: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.093218] Detected PIPT I-cache on CPU3 [ 0.093232] GICv3: CPU3: found redistributor 20100 region 0:0x000000000f560000 [ 0.093249] CPU3: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.122505] Detected PIPT I-cache on CPU4 [ 0.122517] GICv3: CPU4: found redistributor 20200 region 0:0x000000000f580000 [ 0.122534] CPU4: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.151798] Detected PIPT I-cache on CPU5 [ 0.151810] GICv3: CPU5: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.151826] CPU5: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.151887] smp: Brought up 1 node, 6 CPUs [ 0.151900] SMP: Total of 6 processors activated. [ 0.151904] CPU features: detected: Privileged Access Never [ 0.151906] CPU features: detected: LSE atomic instructions [ 0.151908] CPU features: detected: User Access Override [ 0.151910] CPU features: detected: 32-bit EL0 Support [ 0.151913] CPU features: detected: Common not Private translations [ 0.151915] CPU features: detected: RAS Extension Support [ 0.151916] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.151919] CPU features: detected: CRC32 instructions [ 0.151921] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.189940] CPU: All CPU(s) started at EL2 [ 0.191767] devtmpfs: initialized [ 0.208522] Registered cp15_barrier emulation handler [ 0.208538] Registered setend emulation handler [ 0.208544] KASLR enabled [ 0.208689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.208699] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.210647] pinctrl core: initialized pinctrl subsystem [ 0.211207] SMBIOS 3.0.0 present. [ 0.211218] DMI: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 3.0-32616947 02/21/2023 [ 0.211501] NET: Registered protocol family 16 [ 0.212404] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.212470] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.212527] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.212553] audit: initializing netlink subsys (disabled) [ 0.212641] audit: type=2000 audit(0.212:1): state=initialized audit_enabled=0 res=1 [ 0.212831] thermal_sys: Registered thermal governor 'step_wise' [ 0.212833] thermal_sys: Registered thermal governor 'power_allocator' [ 0.212837] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.213701] cpuidle: using governor menu [ 0.213823] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.213905] ASID allocator initialised with 32768 entries [ 0.214003] Serial: AMBA PL011 UART driver [ 0.215720] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.215745] Tegra reboot handler registered. [ 0.237377] mc: mapped MMIO address: 0xffff8000107b0000 -> 0x2c10000 [ 0.237389] mc: mapped MMIO address: 0xffff8000107d0000 -> 0x2c20000 [ 0.237397] mc: mapped MMIO address: 0xffff8000107f0000 -> 0x2c30000 [ 0.237408] mc: mapped MMIO address: 0xffff800010810000 -> 0x2c40000 [ 0.237414] mc: mapped MMIO address: 0xffff800010830000 -> 0x2c50000 [ 0.237421] mc: mapped MMIO address: 0xffff800010850000 -> 0x2b80000 [ 0.237427] mc: mapped MMIO address: 0xffff800010870000 -> 0x2b90000 [ 0.237433] mc: mapped MMIO address: 0xffff800010890000 -> 0x2ba0000 [ 0.237439] mc: mapped MMIO address: 0xffff8000108b0000 -> 0x2bb0000 [ 0.237445] mc: mapped MMIO address: 0xffff8000108d0000 -> 0x1700000 [ 0.237452] mc: mapped MMIO address: 0xffff8000108f0000 -> 0x1710000 [ 0.237459] mc: mapped MMIO address: 0xffff800010910000 -> 0x1720000 [ 0.237465] mc: mapped MMIO address: 0xffff800010930000 -> 0x1730000 [ 0.237471] mc: mapped MMIO address: 0xffff800010950000 -> 0x1740000 [ 0.237477] mc: mapped MMIO address: 0xffff800010970000 -> 0x1750000 [ 0.237483] mc: mapped MMIO address: 0xffff800010990000 -> 0x1760000 [ 0.237490] mc: mapped MMIO address: 0xffff8000109b0000 -> 0x1770000 [ 0.237498] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.237528] mc-err: mcerr ops are set to t23x [ 0.238297] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 65, base_baud = 0) is a SBSA [ 1.390924] printk: console [ttyAMA0] enabled [ 1.399833] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.406540] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.413240] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.419939] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.428658] ACPI: Interpreter disabled. [ 1.432938] ddr-vddq: supplied by vdd-5v [ 1.437081] ddr-vdd2: supplied by vdd-5v [ 1.441124] vdd-AO-1v2: supplied by vdd-5v [ 1.445358] vdd-3v3: supplied by vdd-5v [ 1.449400] vdd-rtc: supplied by vdd-AO-1v2 [ 1.453709] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 1.458544] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 1.463529] vdd-1v8: supplied by vdd-3v3-sys [ 1.467912] vdd-3v3-AO: supplied by vdd-5v-sys [ 1.472467] vdd-av10-hub: supplied by vdd-5v-sys [ 1.477218] vdd-vbus-a: supplied by vdd-5v-sys [ 1.481774] vdd-vbus-b: supplied by vdd-5v-sys [ 1.486342] vdd-3v3-dp: supplied by vdd-3v3-sys [ 1.491156] iommu: Default domain type: Translated [ 1.496073] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.502359] SCSI subsystem initialized [ 1.506183] usbcore: registered new interface driver usbfs [ 1.511685] usbcore: registered new interface driver hub [ 1.517010] usbcore: registered new device driver usb [ 1.522294] mc: Linux media interface: v0.10 [ 1.526574] videodev: Linux video capture interface: v2.00 [ 1.532235] pps_core: LinuxPPS API ver. 1 registered [ 1.537199] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.546334] PTP clock support registered [ 1.550517] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.557673] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.565385] Registered efivars operations [ 1.569933] FPGA manager framework [ 1.573371] Advanced Linux Sound Architecture Driver Initialized. [ 1.579741] Bluetooth: Core ver 2.22 [ 1.583324] NET: Registered protocol family 31 [ 1.587767] Bluetooth: HCI device and connection manager initialized [ 1.594125] Bluetooth: HCI socket layer initialized [ 1.599002] Bluetooth: L2CAP socket layer initialized [ 1.604059] Bluetooth: SCO socket layer initialized [ 1.609507] camchar: rtcpu character device driver loaded [ 1.615155] clocksource: Switched to clocksource arch_sys_counter [ 1.815480] VFS: Disk quotas dquot_6.6.0 [ 1.819449] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.826499] pnp: PnP ACPI: disabled [ 1.832826] la/ptsa driver initialized. [ 1.836724] NET: Registered protocol family 2 [ 1.841214] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.850265] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.858811] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.866807] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.874718] TCP: Hash tables configured (established 65536 bind 65536) [ 1.881317] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.888126] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.895431] NET: Registered protocol family 1 [ 1.900006] RPC: Registered named UNIX socket transport module. [ 1.905931] RPC: Registered udp transport module. [ 1.910641] RPC: Registered tcp transport module. [ 1.915343] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.921788] PCI: CLS 0 bytes, default 64 [ 1.925812] Trying to unpack rootfs image as initramfs... [ 2.085232] Freeing initrd memory: 9120K [ 2.091357] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.099304] kvm [1]: IPA Size Limit: 48 bits [ 2.103621] kvm [1]: GICv3: no GICV resource entry [ 2.108412] kvm [1]: disabling GICv2 emulation [ 2.112868] kvm [1]: GIC system register CPU interface enabled [ 2.118776] kvm [1]: vgic interrupt IRQ9 [ 2.122820] kvm [1]: VHE mode initialized successfully [ 2.128613] Initialise system trusted keyrings [ 2.133140] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.141992] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.148151] NFS: Registering the id_resolver key type [ 2.153217] Key type id_resolver registered [ 2.157399] Key type id_legacy registered [ 2.161450] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.168159] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.175565] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.194855] NET: Registered protocol family 38 [ 2.199302] Key type asymmetric registered [ 2.203397] Asymmetric key parser 'x509' registered [ 2.208292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.215746] io scheduler mq-deadline registered [ 2.220277] io scheduler kyber registered [ 2.228826] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.234428] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.240023] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.246509] efifb: probing for efifb [ 2.250118] efifb: framebuffer at 0x208000000, using 8640k, total 8640k [ 2.256733] efifb: mode is 1920x1080x32, linelength=8192, pages=1 [ 2.262825] efifb: scrolling: redraw [ 2.266402] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.275756] Console: switching to colour frame buffer device 240x67 [ 2.285522] fb0: EFI VGA frame buffer device [ 2.291847] tegra_dc_assign_hw_data: no matching compatible node [ 2.297855] tegradccommon module_init failed [ 2.302123] tegradc module_init failed [ 2.306164] EINJ: ACPI disabled. [ 2.311158] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.318038] tegra-pmc: ### PMC reset source: MAINSWRST [ 2.323175] tegra-pmc: ### PMC reset level: L1 [ 2.327615] tegra-pmc: ### PMC reset status reg: 0x2d [ 2.334356] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.779048] random: fast init done [ 3.959460] printk: console [ttyTCU0] enabled [ 3.964552] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.971252] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.976076] arm-smmu 12000000.iommu: stage 1 translation [ 3.981615] arm-smmu 12000000.iommu: stage 2 translation [ 3.987154] arm-smmu 12000000.iommu: nested translation [ 3.992602] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.000012] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.009127] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.015822] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.022516] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.030059] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.036754] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.041572] arm-smmu 10000000.iommu: stage 1 translation [ 4.047103] arm-smmu 10000000.iommu: stage 2 translation [ 4.052637] arm-smmu 10000000.iommu: nested translation [ 4.058090] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.065499] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.074579] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.081274] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.087972] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.095152] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.101758] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.106489] arm-smmu 8000000.iommu: stage 1 translation [ 4.111941] arm-smmu 8000000.iommu: stage 2 translation [ 4.117386] arm-smmu 8000000.iommu: nested translation [ 4.122745] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.130065] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.139079] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.145689] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.152296] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.159621] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.169360] tegra_profiler: version: 1.151, samples/io: 51/30 [ 4.175340] tegra_profiler: auth: init [ 4.179521] nvsciipc: loaded module [ 4.184897] tun: Universal TUN/TAP device driver, 1.6 [ 4.190633] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.198047] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.203514] e1000e: Intel(R) PRO/1000 Network Driver [ 4.208608] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.214695] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.220235] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.226143] PPP generic driver version 2.4.2 [ 4.230583] PPP BSD Compression module registered [ 4.235411] PPP Deflate Compression module registered [ 4.240599] PPP MPPE Compression module registered [ 4.245548] usbcore: registered new interface driver r8152 [ 4.251182] usbcore: registered new interface driver asix [ 4.256739] usbcore: registered new interface driver ax88179_178a [ 4.262994] usbcore: registered new interface driver cdc_ether [ 4.268992] usbcore: registered new interface driver net1080 [ 4.274796] usbcore: registered new interface driver cdc_subset [ 4.280876] usbcore: registered new interface driver zaurus [ 4.286606] usbcore: registered new interface driver cdc_ncm [ 4.292423] usbcore: registered new interface driver aqc111 [ 4.298274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.304629] ohci-pci: OHCI PCI platform driver [ 4.309199] ohci-platform: OHCI generic platform driver [ 4.314933] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.321293] usbcore: registered new interface driver uas [ 4.326771] usbcore: registered new interface driver usb-storage [ 4.333112] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.339227] mousedev: PS/2 mouse device common for all mice [ 4.344974] usbcore: registered new interface driver xpad [ 4.352421] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.357893] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:33 UTC (33) [ 4.366140] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.372549] i2c /dev entries driver [ 4.376279] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.382068] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.387769] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.393457] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.399140] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.404826] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.410505] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.416183] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.426291] device-mapper: uevent: version 1.0.3 [ 4.431140] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.440854] sdhci: Secure Digital Host Controller Interface driver [ 4.447204] sdhci: Copyright(c) Pierre Ossman [ 4.451675] Synopsys Designware Multimedia Card Interface Driver [ 4.457936] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.464330] sdhci-tegra 3400000.sdhci: Adding to iommu group 3 [ 4.464851] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.477782] tegra-bpmp bpmp: firmware: f0fadc45ec6216cb5b0b-1377b684fe5 [ 4.485902] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.491293] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 4.500218] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.506135] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful [ 5.594660] hid: raw HID events driver (C) Jiri Kosina [ 5.600463] usbcore: registered new interface driver usbhid [ 5.606200] usbhid: USB HID core driver [ 5.610638] tegra-dce d800000.dce: Adding to iommu group 4 [ 5.617779] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 5.626449] tegra234-aon c000000.aon: Adding to iommu group 5 [ 5.632868] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.640057] c000000.aon:hsp: probed [ 5.642008] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.652415] tegra234-aon c000000.aon: init done [ 5.652825] tegra23x-psc e860000.psc: Adding to iommu group 6 [ 5.657218] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.663313] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.671969] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.678379] tegra23x-psc e860000.psc: init done [ 5.678549] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 7 [ 5.686797] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.692433] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.698195] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.722896] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 5.731560] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 5.738532] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 5.747716] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 5.759349] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 5.770755] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 5.782513] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 5.795073] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 5.807890] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 5.820039] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (113) [ 5.826835] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 5.835494] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=0b67520f597ddc6db82218e87c6c6eb8979fd4bb [ 5.848985] t19x_cache tegra-cache: probed [ 5.853430] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 5.864381] optee: probing for conduit method. [ 5.868981] optee: revision 3.19 (3f29c61f) [ 5.869701] optee: dynamic shared memory is enabled [ 5.879167] optee: initialized driver [ 5.895393] nvpmodel: initialized successfully [ 5.900086] tegra_hv: get_hvd: not initialized yet [ 5.905036] user_ivc_mempool: hypervisor not present [ 5.910864] usbcore: registered new interface driver snd-usb-audio [ 5.918071] u32 classifier [ 5.920869] input device check on [ 5.924646] Actions configured [ 5.928308] Initializing XFRM netlink socket [ 5.933155] NET: Registered protocol family 10 [ 5.939369] Segment Routing with IPv6 [ 5.943196] NET: Registered protocol family 17 [ 5.947792] NET: Registered protocol family 15 [ 5.952418] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.966509] Bluetooth: RFCOMM socket layer initialized [ 5.971815] Bluetooth: RFCOMM ver 1.11 [ 5.975677] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.981754] Bluetooth: HIDP socket layer initialized [ 5.987558] 9pnet: Installing 9P2000 support [ 5.992015] Key type dns_resolver registered [ 5.997117] registered taskstats version 1 [ 6.001345] Loading compiled-in X.509 certificates [ 6.017232] Loaded X.509 cert 'Build time autogenerated kernel key: e63fb224cdc2a940ac382bb67b420fcb52cc4aee' [ 6.028030] tegra194-pcie 14100000.pcie: Adding to iommu group 8 [ 6.041249] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.048600] tegra194-pcie 14160000.pcie: Adding to iommu group 9 [ 6.061337] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.068347] tegra194-pcie 141e0000.pcie: Adding to iommu group 10 [ 6.080683] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 6.087653] tegra194-pcie 140a0000.pcie: Adding to iommu group 11 [ 6.100216] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 6.107533] tegra194-pcie 140a0000.pcie: Failed to get slot regulators: -517 [ 6.133663] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.144074] host1x 13e40000.host1x: Adding to iommu group 13 [ 6.173298] host1x 13e40000.host1x: initialized [ 6.178440] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 6.186534] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 6.198855] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 6.206860] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 6.219204] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 6.227211] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 6.239565] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 6.247557] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.259862] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 6.267871] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.280196] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 6.288187] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.300483] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 6.308487] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.320799] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 6.328814] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.341131] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 6.349136] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 6.361430] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 6.369420] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 6.381750] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 6.389774] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 6.402083] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 6.410084] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 6.422401] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 6.430381] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 6.442678] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 6.450678] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 6.462990] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 6.470979] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 6.483311] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 6.491296] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 6.503644] falcon 15340000.vic: Adding to iommu group 30 [ 6.514279] falcon 15340000.vic: initialized [ 6.519002] falcon 15380000.nvjpg: Adding to iommu group 31 [ 6.528179] falcon 15380000.nvjpg: initialized [ 6.532915] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 6.542268] falcon 15540000.nvjpg1: initialized [ 6.547080] falcon 154c0000.nvenc: Adding to iommu group 33 [ 6.556992] falcon 154c0000.nvenc: _opp_is_duplicate: duplicate OPPs detected. Existing: freq: 115200000, volt: 0, enabled: 1. New: freq: 115200000, volt: 0, enabled: 1 [ 6.573639] falcon 154c0000.nvenc: initialized [ 6.578367] falcon 15a50000.ofa: Adding to iommu group 34 [ 6.589841] falcon 15a50000.ofa: initialized [ 6.594397] nvdec 15480000.nvdec: Adding to iommu group 35 [ 6.612507] nvdec 15480000.nvdec: initialized [ 6.617148] tsec 15500000.tsec: Adding to iommu group 36 [ 6.631375] tsec 15500000.tsec: initialized [ 6.639117] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.656795] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.672208] gpio-397 (camera-control-output-low): hogged as output/low [ 6.678989] gpio-486 (camera-control-output-low): hogged as output/low [ 6.686787] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.694069] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.701073] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.707651] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.714224] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.722598] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 6.730927] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.740534] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.747005] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.756249] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.765633] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 6.773781] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 6.781774] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 6.791711] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 6.798520] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 6.808428] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 6.815242] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.825137] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 6.831970] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 6.840608] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 6.851990] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 6.860589] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 6.871941] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 6.880543] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 6.891906] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 6.900506] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 6.911864] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 6.920506] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 6.931883] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 6.940479] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 6.951838] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 6.960457] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 6.971837] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 6.980430] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 6.991789] pva 16000000.pva0: Adding to iommu group 48 [ 6.997600] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 7.003684] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 7.009869] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 7.017303] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 7.024815] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.031440] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.038176] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.045544] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud = 0) is a TEGRA_UART [ 7.055264] serial-tegra 3130000.serial: Adding to iommu group 2 [ 7.062442] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 63, base_baud = 0) is a TEGRA_UART [ 7.072074] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.079251] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 7.107834] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 7.117588] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.123161] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.131840] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 7.141463] tegra-xusb 3610000.xhci: irq 230, io mem 0x03610000 [ 7.147931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.156473] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.163926] usb usb1: Product: xHCI Host Controller [ 7.168946] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.175230] usb usb1: SerialNumber: 3610000.xhci [ 7.180793] hub 1-0:1.0: USB hub found [ 7.184680] hub 1-0:1.0: 4 ports detected [ 7.189091] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.194648] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.202438] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.209940] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.218451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.225890] usb usb2: Product: xHCI Host Controller [ 7.230903] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.237182] usb usb2: SerialNumber: 3610000.xhci [ 7.242409] hub 2-0:1.0: USB hub found [ 7.246293] hub 2-0:1.0: 4 ports detected [ 7.269969] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.275519] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.280560] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.287568] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 7.309011] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1576000 KHz, changing to: 1510400 KHz [ 7.322635] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1562000 KHz, changing to: 1510400 KHz [ 7.334544] tegra194-cpufreq e000000.ccplex: probed with ICC [ 7.341772] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 7.344179] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 7.349736] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 7.360364] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 7.362548] irq: IRQ294: trimming hierarchy from :interrupt-controller@f400000-1 [ 7.369077] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 7.376751] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 294 [ 7.385402] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 7.451164] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.507362] tegra194-pcie 14100000.pcie: Link up [ 7.515540] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 7.522354] pci_bus 0001:00: root bus resource [bus 00-ff] [ 7.527989] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 7.537828] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 7.548651] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 7.556590] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 7.562938] pci 0001:00:00.0: PME# supported from D0 D3hot [ 7.574304] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 7.580669] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 7.586627] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 7.595078] pci 0001:01:00.0: supports D1 D2 [ 7.599473] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7.611741] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 7.619183] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 7.625576] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 7.630729] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.633589] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 7.641938] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.648258] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 7.655583] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.660964] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 7.665713] usb 1-2: Manufacturer: Generic [ 7.671998] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 7.679203] hub 1-2:1.0: USB hub found [ 7.683579] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 7.688947] hub 1-2:1.0: 4 ports detected [ 7.696203] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 7.709359] pcieport 0001:00:00.0: Adding to iommu group 8 [ 7.715336] pcieport 0001:00:00.0: PME: Signaling with IRQ 55 [ 7.721633] pcieport 0001:00:00.0: AER: enabled with IRQ 55 [ 7.728485] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 7.736394] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 7.743587] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 7.747880] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.752274] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 7.768760] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 7.797947] usb 2-1: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.806365] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.813708] usb 2-1: Product: 4-Port USB 3.0 Hub [ 7.818449] usb 2-1: Manufacturer: Generic [ 7.833604] hub 2-1:1.0: USB hub found [ 7.839493] hub 2-1:1.0: 4 ports detected [ 7.915356] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 8.077015] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 8.085428] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.092768] usb 1-3: Product: Bluetooth Radio [ 8.097247] usb 1-3: Manufacturer: Realtek [ 8.101461] usb 1-3: SerialNumber: 00e04c000001 [ 8.423157] usb 1-2.3: new low-speed USB device number 4 using tegra-xusb [ 8.542056] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c044, bcdDevice=27.20 [ 8.550652] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.558173] usb 1-2.3: Product: USB-PS/2 Optical Mouse [ 8.563457] usb 1-2.3: Manufacturer: Logitech [ 8.574416] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C044.0001/input/input0 [ 8.588629] hid-generic 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-3610000.xhci-2.3/input0 [ 8.683166] usb 1-2.4: new high-speed USB device number 5 using tegra-xusb [ 8.798104] usb 1-2.4: New USB device found, idVendor=05ac, idProduct=1006, bcdDevice=96.15 [ 8.806695] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.814217] usb 1-2.4: Product: Keyboard Hub [ 8.818609] usb 1-2.4: Manufacturer: Apple, Inc. [ 8.823349] usb 1-2.4: SerialNumber: 000000000000 [ 8.829178] hub 1-2.4:1.0: USB hub found [ 8.833528] hub 1-2.4:1.0: 3 ports detected [ 8.871587] tegra194-pcie 14160000.pcie: Phy link never came up [ 8.877777] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 8.884579] pci_bus 0004:00: root bus resource [bus 00-ff] [ 8.890216] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 8.900317] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 8.911138] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 8.919069] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 8.925434] pci 0004:00:00.0: PME# supported from D0 D3hot [ 8.941185] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 8.946577] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 8.955632] pcieport 0004:00:00.0: Adding to iommu group 9 [ 8.961570] pcieport 0004:00:00.0: PME: Signaling with IRQ 57 [ 8.967864] pcieport 0004:00:00.0: AER: enabled with IRQ 57 [ 8.973896] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 8.980048] pci 0004:00:00.0: Removing from iommu group 9 [ 8.985608] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 8.993554] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 9.001137] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges: [ 9.008331] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 9.017046] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 9.025738] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff -> 0x2e40000000 [ 9.131359] usb 1-2.4.2: new low-speed USB device number 6 using tegra-xusb [ 9.251582] usb 1-2.4.2: New USB device found, idVendor=05ac, idProduct=0220, bcdDevice= 0.69 [ 9.260354] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.268048] usb 1-2.4.2: Product: Apple Keyboard [ 9.272791] usb 1-2.4.2: Manufacturer: Apple, Inc [ 9.287720] input: Apple, Inc Apple Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/0003:05AC:0220.0002/input/input1 [ 9.360159] apple 0003:05AC:0220.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-3610000.xhci-2.4.2/input0 [ 9.376832] apple 0003:05AC:0220.0003: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling [ 9.387595] input: Apple, Inc Apple Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.1/0003:05AC:0220.0003/input/input2 [ 9.460032] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-3610000.xhci-2.4.2/input1 [ 10.127585] tegra194-pcie 141e0000.pcie: Phy link never came up [ 10.133757] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 10.140570] pci_bus 0007:00: root bus resource [bus 00-ff] [ 10.146208] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3e100000-0x3e1fffff]) [ 10.156309] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.167131] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref] [ 10.175050] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 10.181364] pci 0007:00:00.0: PME# supported from D0 D3hot [ 10.197218] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 10.202609] pci 0007:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.211679] pcieport 0007:00:00.0: Adding to iommu group 10 [ 10.217689] pcieport 0007:00:00.0: PME: Signaling with IRQ 59 [ 10.223980] pcieport 0007:00:00.0: AER: enabled with IRQ 59 [ 10.229994] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 10.236119] pci 0007:00:00.0: Removing from iommu group 10 [ 10.241792] pci_bus 0007:00: busn_res: [bus 00-ff] is released [ 10.249713] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 10.256335] tegra194-pcie 140a0000.pcie: Failed to get slot regulators: -517 [ 10.256670] vdd-3v3-sd: supplied by vdd-3v3 [ 10.263368] tegra194-isp5 14800000.isp: initialized [ 10.277694] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 10.284180] (NULL device *): fops function table already registered [ 10.292661] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 10.300631] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 10.300635] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 10.301250] irq: IRQ295: trimming hierarchy from :interrupt-controller@f400000-1 [ 10.319753] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 294 [ 10.431711] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 10.438916] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 10.447630] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 10.456350] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 10.571358] tegra194-pcie 140a0000.pcie: Link up [ 10.579528] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 10.586334] pci_bus 0008:00: root bus resource [bus 00-ff] [ 10.591971] pci_bus 0008:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x2a100000-0x2a1fffff]) [ 10.602073] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.612899] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 10.620817] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.627156] pci 0008:00:00.0: PME# supported from D0 D3hot [ 10.638317] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 10.644665] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 10.650602] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 10.657720] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 10.665783] pci 0008:01:00.0: supports D1 D2 [ 10.670188] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 10.682419] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 10.689860] pci 0008:00:00.0: BAR 13: assigned [io 0x300000-0x300fff] [ 10.696592] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 10.704579] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 10.712560] pci 0008:01:00.0: BAR 0: assigned [io 0x300000-0x3000ff] [ 10.719226] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 10.724609] pci 0008:00:00.0: bridge window [io 0x300000-0x300fff] [ 10.731256] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 10.738621] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 10.747370] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 10.756448] pcieport 0008:00:00.0: Adding to iommu group 11 [ 10.762493] pcieport 0008:00:00.0: PME: Signaling with IRQ 61 [ 10.768792] pcieport 0008:00:00.0: AER: enabled with IRQ 61 [ 10.775915] pva 16000000.pva0: deferred probe timeout, ignoring dependency [ 10.783005] pva: probe of 16000000.pva0 failed with error -110 [ 10.789169] nvdla 15880000.nvdla0: deferred probe timeout, ignoring dependency [ 10.796598] nvdla: probe of 15880000.nvdla0 failed with error -110 [ 10.803038] nvdla 158c0000.nvdla1: deferred probe timeout, ignoring dependency [ 10.810463] nvdla: probe of 158c0000.nvdla1 failed with error -110 [ 10.818521] irq: IRQ297: trimming hierarchy from :pmc@c360000 [ 10.824514] irq: IRQ298: trimming hierarchy from :interrupt-controller@f400000-1 [ 10.832240] input: gpio-keys as /devices/platform/gpio-keys/input/input3 [ 10.839823] tegra-se-nvhost 15810000.se: Adding to iommu group 51 [ 10.846590] tegra-se-nvhost 15810000.se: initialized [ 10.861875] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 10.868337] tegra-se-nvhost 15820000.se: Adding to iommu group 52 [ 10.874957] tegra-se-nvhost 15820000.se: initialized [ 10.881350] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 10.887781] tegra-se-nvhost 15840000.se: Adding to iommu group 53 [ 10.894416] tegra-se-nvhost 15840000.se: initialized [ 10.901049] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 10.908097] tegra_actmon d230000.actmon: in actmon_register()... [ 10.914461] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 10.920693] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 10.929135] hvc_sysfs: hypervisor is not present [ 10.968877] ALSA device list: [ 10.971945] No soundcards found. [ 10.976330] Freeing unused kernel memory: 3968K [ 10.981146] Run /init as init process [ 10.984934] with arguments: [ 10.984935] /init [ 10.984936] with environment: [ 10.984937] HOME=/ [ 10.984939] TERM=linux [ 10.984940] mminit_loglevel=4 [ 11.001234] Root device found: mmcblk1p1 [ 11.375896] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 11.717148] mmc1: new ultra high speed SDR104 SDXC card at address 1388 [ 11.724702] mmcblk1: mmc1:1388 USD00 233 GiB [ 11.869366] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 12.021456] Found dev node: /dev/mmcblk1p1 [ 12.220515] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.230327] Rootfs mounted over mmcblk1p1 [ 12.396325] Switching from initrd to actual rootfs [ 12.656472] systemd[1]: System time before build time, advancing clock. [ 12.885592] systemd[1]: systemd 245.4-4ubuntu3.21 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.909397] systemd[1]: Detected architecture arm64. [ 13.095604] systemd[1]: Set hostname to . [ 13.445286] random: systemd: uninitialized urandom read (16 bytes read) [ 13.452215] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 13.465203] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 13.475245] systemd[1]: Created slice system-modprobe.slice. [ 13.495204] random: systemd: uninitialized urandom read (16 bytes read) [ 13.502490] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 13.523192] random: systemd: uninitialized urandom read (16 bytes read) [ 13.530446] systemd[1]: Created slice User and Session Slice. [ 13.551300] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 13.575503] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.599273] systemd[1]: Reached target User and Group Name Lookups. [ 13.619209] systemd[1]: Reached target Slices. [ 13.635196] systemd[1]: Reached target Mounting snaps. [ 13.655194] systemd[1]: Reached target Swap. [ 13.671512] systemd[1]: Listening on RPCbind Server Activation Socket. [ 13.691329] systemd[1]: Listening on Syslog Socket. [ 13.711312] systemd[1]: Listening on fsck to fsckd communication Socket. [ 13.735268] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 13.755456] systemd[1]: Listening on Journal Audit Socket. [ 13.775315] systemd[1]: Listening on Journal Socket (/dev/log). [ 13.795353] systemd[1]: Listening on Journal Socket. [ 13.815362] systemd[1]: Listening on udev Control Socket. [ 13.820815] random: crng init done [ 13.824409] random: 7 urandom warning(s) missed due to ratelimiting [ 13.847350] systemd[1]: Listening on udev Kernel Socket. [ 13.868810] systemd[1]: Mounting Huge Pages File System... [ 13.892675] systemd[1]: Mounting POSIX Message Queue File System... [ 13.916842] systemd[1]: Mounting RPC Pipe File System... [ 13.940776] systemd[1]: Mounting Kernel Debug File System... [ 13.964716] systemd[1]: Mounting Kernel Trace File System... [ 13.989221] systemd[1]: Starting Journal Service... [ 14.010041] systemd[1]: Starting Set the console keyboard layout... [ 14.037499] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 14.065344] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 14.087280] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 14.097657] systemd[1]: Starting Load Kernel Module efi_pstore... [ 14.120888] systemd[1]: Starting Load Kernel Module pstore_blk... [ 14.140788] systemd[1]: Starting Load Kernel Module pstore_zone... [ 14.160695] systemd[1]: Starting Load Kernel Module ramoops... [ 14.185026] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 14.212948] systemd[1]: Started Nameserver information manager. [ 14.235503] systemd[1]: Reached target Network (Pre). [ 14.269566] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 14.279045] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 14.293738] systemd[1]: Starting Load Kernel Modules... [ 14.317271] systemd[1]: Starting Remount Root and Kernel File Systems... [ 14.326273] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 14.335282] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null) [ 14.335653] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000249800000,914358272 [ 14.345193] systemd[1]: Starting udev Coldplug all Devices... [ 14.352424] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 14.366577] nvmap_page_pool_init: Total RAM pages: 1659032 [ 14.372244] nvmap_page_pool_init: nvmap page pool size: 207379 pages (810 MB) [ 14.382521] nvmap_background_zero_thread: PP zeroing thread starting. [ 14.382707] misc nvmap: created heap vpr base 0x0000000249800000 size (892928KiB) [ 14.410384] systemd[1]: Started Journal Service. [ 14.646707] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 14.826156] systemd-journald[253]: Received client request to flush runtime journal. [ 15.639540] loop: module loaded [ 16.912185] nvidia: loading out-of-tree module taints kernel. [ 16.927084] nv_platform 13800000.display: Adding to iommu group 54 [ 16.934605] platform 13800000.display:nvdisplay-niso: Adding to iommu group 55 [ 16.936985] NVRM: loading NVIDIA UNIX Open Kernel Module for aarch64 35.3.1 Release Build (buildbrain@mobile-u64-6289-d7000) Sun Mar 19 08:09:33 PDT 2023 [ 16.952653] spi-tegra114 3210000.spi: Adding to iommu group 2 [ 16.956763] spi-tegra114 3230000.spi: Adding to iommu group 2 [ 16.964051] r8169 0008:01:00.0: Adding to iommu group 11 [ 16.964704] r8169 0008:01:00.0: enabling device (0000 -> 0003) [ 16.966134] imx477 9-001a: tegracam sensor driver:imx477_v2.0.6 [ 16.999032] r8169 0008:01:00.0 eth0: RTL8168h/8111h, 48:b0:2d:eb:bb:c4, XID 541, IRQ 299 [ 16.999043] r8169 0008:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 17.003341] tegra-hda 3510000.hda: Adding to iommu group 56 [ 17.033291] cpu-throttle-alert cooling device registered. [ 17.033421] gpu-throttle-alert cooling device registered. [ 17.033491] cv0-throttle-alert cooling device registered. [ 17.033552] cv1-throttle-alert cooling device registered. [ 17.033613] cv2-throttle-alert cooling device registered. [ 17.033676] soc0-throttle-alert cooling device registered. [ 17.033736] soc1-throttle-alert cooling device registered. [ 17.033803] soc2-throttle-alert cooling device registered. [ 17.033932] hot-surface-alert cooling device registered. [ 17.081947] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels [ 17.110477] nvadsp 2993000.adsp: Adding to iommu group 57 [ 17.110699] nvadsp 2993000.adsp: in probe()... [ 17.116391] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input4 [ 17.116514] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input5 [ 17.116584] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input6 [ 17.116653] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input7 [ 17.123612] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 17.146324] irq: IRQ301: trimming hierarchy from :pmc@c360000 [ 17.157627] fusb301 1-0025: device id: 0x12 [ 17.188692] fusb301 1-0025: toggle_time(0) is not updated [ 17.194710] fusb301 1-0025: fusb301_set_mode: mode (32)(32) [ 17.197252] fusb301 1-0025: fusb301_detach: type[0x00] chipstate[0x01] [ 17.197260] fusb301 1-0025: fusb_update_state: 1 [ 17.198055] fusb301 1-0025: mode[0x20], host_cur[0x02], dttime[0x00] [ 17.230083] rtl88x2ce 0001:01:00.0: Adding to iommu group 8 [ 17.230660] rtl88x2ce 0001:01:00.0: enabling device (0000 -> 0003) [ 17.267268] tegra-camrtc-capture-vi tegra-capture-vi: subdev imx477 9-001a bound [ 17.268971] imx477 10-001a: tegracam sensor driver:imx477_v2.0.6 [ 17.449465] tegra-asoc: sound: Adding to iommu group 57 [ 17.561096] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 57 [ 17.561151] tegra210_adsp_audio_probe: platform probe started [ 17.561660] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1 [ 17.561997] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot [ 17.562322] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src [ 17.562647] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1 [ 17.562968] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec [ 17.569724] imx477 10-001a: imx477_board_setup: error during i2c read probe (-121) [ 17.569745] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire [ 17.577758] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found [ 17.577761] tegra210-adsp tegra210-adsp: using adma channel page 0 [ 17.577867] nvadsp 2993000.adsp: ADSP OS firmware already loaded [ 17.578128] imx477 10-001a: board setup failed [ 17.591030] imx477: probe of 10-001a failed with error -121 [ 17.619605] usbcore: registered new interface driver btusb [ 17.648818] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 17.648830] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 17.648832] rtk_btcoex: create workqueue [ 17.649785] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 17.649905] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 17.649908] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 17.649910] rtk_btusb: patch_add [ 17.649912] rtk_btusb: auto suspend is disabled [ 17.649915] rtk_btusb: pid = 0x3549 [ 17.649918] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 17.649931] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 17.651839] rtk_btusb: btusb_probe: done [ 17.651953] rtk_btusb: btusb_open start [ 17.651958] rtk_btusb: btusb_open hdev->promisc ==0 [ 17.651962] rtk_btusb: download_patch start [ 17.651966] rtk_btusb: chip type value: 0x73 [ 17.651969] rtk_btusb: HCI reset. [ 17.652816] usbcore: registered new interface driver rtk_btusb [ 17.662944] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 17.662954] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 17.662955] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 17.662957] rtk_btusb: load_firmware start [ 17.662958] rtk_btusb: lmp_version = 0x8822 [ 17.662960] rtk_btusb: config filename rtl8822cu_config [ 17.669422] rtk_btusb: no bdaddr file /opt/bdaddr [ 17.669435] rtk_btusb: 55 ab 23 87 00 00 [ 17.669446] rtk_btusb: Config file length 6, new length 6 [ 17.669448] rtk_btusb: fw name is rtl8822cu_fw [ 17.685006] rtk_btusb: This is not 8723a, use new patch style! [ 17.685018] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 17.685911] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 17.685917] rtk_btusb: load_firmware: New gEVersion 3 [ 17.685921] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 17.685923] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 17.685925] rtk_btusb: fw_version = 0x9a8cbc9 [ 17.685927] rtk_btusb: number_of_total_patch = 3 [ 17.685928] rtk_btusb: chipID 4 [ 17.685929] rtk_btusb: patch_length 0x8590 [ 17.685930] rtk_btusb: start_offset 0x00005d00 [ 17.685932] rtk_btusb: Svn version: 1940234490 [ 17.685933] rtk_btusb: Coexistence: BTCOEX_20210106-2020 [ 17.685935] rtk_btusb: buf_len = 0x8596 [ 17.685945] rtk_btusb: fw: exists, config file: exists [ 17.685947] rtk_btusb: load_firmware done [ 17.685970] rtk_btusb: download_data start [ 17.697614] cryptd: max_cpu_qlen set to 1000 [ 17.857971] rtk_btusb: download_data done [ 17.857983] rtk_btusb: HCI reset. [ 17.869928] rtk_btusb: read_ver_rsp->lmp_subver = 0xcbc9 [ 17.869937] rtk_btusb: read_ver_rsp->hci_rev = 0x9a8 [ 17.869938] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 17.869951] rtk_btusb: Rtk patch end 0 [ 17.869955] rtk_btusb: btusb_open set HCI_RUNNING [ 17.869991] rtk_btcoex: Open BTCOEX [ 17.869992] rtk_btusb: btusb_open end [ 17.873943] rtk_btcoex: BTCOEX hci_rev 0x09a8 [ 17.873950] rtk_btcoex: BTCOEX lmp_subver 0xcbc9 [ 17.893940] rtk_btusb: btusb_notify: hci0 evt 3 [ 18.032403] tegra210-adsp tegra210-adsp: Loaded app wire [ 18.032414] tegra210-adsp tegra210-adsp: Loaded app apm [ 18.032417] tegra210-adsp tegra210-adsp: Loaded app adma [ 18.032420] tegra210-adsp tegra210-adsp: Loaded app adma_tx [ 18.032426] nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 000000003cd8285a [ 18.067916] tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered [ 18.662100] using random self ethernet address [ 18.669683] using random host ethernet address [ 19.778459] Mass Storage Function, version: 2009/09/11 [ 19.778475] LUN: removable file: (no medium) [ 19.782220] using random self ethernet address [ 19.786901] using random host ethernet address [ 19.797831] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.797856] Bluetooth: BNEP socket layer initialized [ 19.825655] rndis0: HOST MAC 96:a9:04:cd:72:8c [ 19.825666] rndis0: MAC 96:a9:04:cd:72:8d [ 19.826526] usb0: HOST MAC 96:a9:04:cd:72:8e [ 19.826531] usb0: MAC 96:a9:04:cd:72:8f [ 19.827510] tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled [ 19.832473] l4tbr0: port 1(rndis0) entered blocking state [ 19.832495] l4tbr0: port 1(rndis0) entered disabled state [ 19.832835] device rndis0 entered promiscuous mode [ 19.846993] l4tbr0: port 2(usb0) entered blocking state [ 19.847033] l4tbr0: port 2(usb0) entered disabled state [ 19.847524] device usb0 entered promiscuous mode [ 20.187200] Generic FE-GE Realtek PHY r8169-8-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-8-100:00, irq=IGNORE) [ 20.399330] r8169 0008:01:00.0 eth0: Link is Down [ 24.130199] r8169 0008:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 24.130251] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.106620] pstore: Using crash dump compression: deflate [ 26.106693] printk: console [ramoops-1] enabled [ 26.106697] pstore: Registered ramoops as persistent store backend [ 26.106700] ramoops: using 0x200000@0x231800000, ecc: 0 [ 26.162590] nvgpu: 17000000.ga10b tpc_pg_mask_store:1067 [INFO] no value change, same mask already set [ 26.395259] nvgpu: 17000000.ga10b gk20a_scale_init:539 [INFO] enabled scaling for GPU [ 26.704304] zram: Added device: zram0 [ 26.705084] zram: Added device: zram1 [ 26.705372] zram: Added device: zram2 [ 26.705578] zram: Added device: zram3 [ 26.705774] zram: Added device: zram4 [ 26.705977] zram: Added device: zram5 [ 26.815876] zram0: detected capacity change from 0 to 566284288 [ 26.983245] Adding 553008k swap on /dev/zram0. Priority:5 extents:1 across:553008k SS [ 26.985328] zram1: detected capacity change from 0 to 566284288 [ 27.007323] Adding 553008k swap on /dev/zram1. Priority:5 extents:1 across:553008k SS [ 27.010068] zram2: detected capacity change from 0 to 566284288 [ 27.039336] Adding 553008k swap on /dev/zram2. Priority:5 extents:1 across:553008k SS [ 27.041171] zram3: detected capacity change from 0 to 566284288 [ 27.071301] Adding 553008k swap on /dev/zram3. Priority:5 extents:1 across:553008k SS [ 27.073532] zram4: detected capacity change from 0 to 566284288 [ 27.107415] Adding 553008k swap on /dev/zram4. Priority:5 extents:1 across:553008k SS [ 27.109244] zram5: detected capacity change from 0 to 566284288 [ 27.135596] Adding 553008k swap on /dev/zram5. Priority:5 extents:1 across:553008k SS [ 29.070277] Bridge firewalling registered [ 30.484259] fuse: init (API version 7.32) [ 30.539773] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for aarch64 35.3.1 Release Build (buildbrain@mobile-u64-6289-d7000) Sun Mar 19 08:09:35 PDT 2023 [ 30.785689] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080013f result 0x56: [ 30.787492] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080017e result 0x56: [ 30.794680] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080014a result 0x56: [ 30.882527] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [ 30.883369] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x730190 result 0x56: [ 32.650848] audit: type=1326 audit(1683920427.313:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2450 comm="cupsd" exe="/snap/cups/873/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff8a11eee8 code=0x50000 [ 33.886393] audit: type=1326 audit(1683920428.549:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2450 comm="cupsd" exe="/snap/cups/873/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff8a11eee8 code=0x50000 [ 33.998380] audit: type=1326 audit(1683920428.661:4): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2489 comm="cups-browsed" exe="/snap/cups/873/sbin/cups-browsed" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffffb75f88c4 code=0x50000 [ 106.449325] bwmgr API not supported [ 109.033368] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 109.046162] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 109.056943] (NULL device *): vi_capture_control_message: NULL VI channel received [ 109.064682] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 109.075354] (NULL device *): vi_capture_control_message: NULL VI channel received [ 109.083081] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 109.094042] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 111.849140] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 111.858378] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 111.868932] (NULL device *): vi_capture_control_message: NULL VI channel received [ 111.876719] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 111.887415] (NULL device *): vi_capture_control_message: NULL VI channel received [ 111.895162] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 111.906028] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 114.665145] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 114.674304] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 114.684899] (NULL device *): vi_capture_control_message: NULL VI channel received [ 114.692643] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 114.703344] (NULL device *): vi_capture_control_message: NULL VI channel received [ 114.711082] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 114.721934] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 117.257277] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 117.266444] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 117.277485] (NULL device *): vi_capture_control_message: NULL VI channel received [ 117.285256] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 117.295953] (NULL device *): vi_capture_control_message: NULL VI channel received [ 117.303674] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 117.314731] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 117.329025] bwmgr API not supported [ 521.710961] bwmgr API not supported [ 524.248595] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 524.261334] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 524.271965] (NULL device *): vi_capture_control_message: NULL VI channel received [ 524.279696] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 524.290378] (NULL device *): vi_capture_control_message: NULL VI channel received [ 524.298101] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 524.308957] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 527.064521] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 527.073674] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 527.083922] (NULL device *): vi_capture_control_message: NULL VI channel received [ 527.091638] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 527.102292] (NULL device *): vi_capture_control_message: NULL VI channel received [ 527.110001] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 527.120842] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 529.656460] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [ 529.665616] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [ 529.676109] (NULL device *): vi_capture_control_message: NULL VI channel received [ 529.683829] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [ 529.694494] (NULL device *): vi_capture_control_message: NULL VI channel received [ 529.702217] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [ 529.713093] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [ 529.727243] bwmgr API not supported [18412.341254] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffc7b800, fsynr=0x4b0003, cbfrsynra=0x5, cb=3 [18412.361696] mc-err: (255) csr_pcie1r: EMEM address decode error [18412.367959] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [18412.376209] mc-err: secure: yes, access-type: read [19618.313126] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffdb8000, fsynr=0x4b0003, cbfrsynra=0x405, cb=3 [19618.330140] mc-err: (255) csr_pcie1r: EMEM address decode error [19618.336356] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [19618.344622] mc-err: secure: yes, access-type: read [39286.955452] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffb96000, fsynr=0x550003, cbfrsynra=0x5, cb=3 [39286.967919] mc-err: (255) csr_pcie1r: EMEM address decode error [39286.974016] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [39286.982266] mc-err: secure: yes, access-type: read [84403.824950] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffca7800, fsynr=0x550003, cbfrsynra=0xc05, cb=3 [84403.837572] mc-err: (255) csr_pcie1r: EMEM address decode error [84403.843685] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [84403.851931] mc-err: secure: yes, access-type: read [109994.240880] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffd31800, fsynr=0x550003, cbfrsynra=0xc05, cb=3 [109994.253503] mc-err: Too many MC errors; throttling prints [161359.066757] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffb09000, fsynr=0x550003, cbfrsynra=0xc05, cb=3 [161359.079452] mc-err: (255) csr_pcie1r: EMEM address decode error [161359.085632] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [161359.093966] mc-err: secure: yes, access-type: read [171378.928890] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffdaa800, fsynr=0x550003, cbfrsynra=0x405, cb=3 [171378.941505] mc-err: (255) csr_pcie1r: EMEM address decode error [171378.947809] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [171378.956132] mc-err: secure: yes, access-type: read [221019.721130] arm-smmu 8000000.iommu: Unhandled context fault: fsr=0x80000402, iova=0xffca8000, fsynr=0x550003, cbfrsynra=0x405, cb=3 [221019.733838] mc-err: (255) csr_pcie1r: EMEM address decode error [221019.740021] mc-err: status = 0x200640da; hi_addr_reg = 0x000000ff addr = 0xffffffff00 [221019.748363] mc-err: secure: yes, access-type: read [238175.815486] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [238176.154110] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [238177.033374] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [238177.276844] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [238435.083606] usb 1-2.1: new high-speed USB device number 7 using tegra-xusb [238435.556930] usb 1-2.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 1.00 [238435.556945] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [238435.556950] usb 1-2.1: Product: HD Webcam C270 [238435.556953] usb 1-2.1: Manufacturer: HD Webcam C270 [238435.567569] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [238435.617078] usb 1-2.1: set resolution quirk: cval->res = 384 [238435.811299] uvcvideo: Found UVC 1.00 device HD Webcam C270 (046d:0825) [238435.815914] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1). [238435.846994] input: HD Webcam C270: HD Webcam C270 as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input8 [238435.847176] usbcore: registered new interface driver uvcvideo [238435.847179] USB Video Class driver (1.1.1) [238436.030455] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [238436.113039] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [238519.861717] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [238586.640486] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [238616.523425] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [238778.243909] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [238866.522200] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [238867.685624] bwmgr API not supported [238867.698008] regmap_util_write_table_8:regmap_util_write_table:-121 [238867.701725] imx477 9-001a: Error writing mode [238870.181388] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [238870.190624] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [238870.201128] (NULL device *): vi_capture_control_message: NULL VI channel received [238870.208966] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [238870.219713] (NULL device *): vi_capture_control_message: NULL VI channel received [238870.227535] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [238870.238473] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [238870.248939] ------------[ cut here ]------------ [238870.248964] WARNING: CPU: 2 PID: 27870 at drivers/media/common/videobuf2/videobuf2-core.c:1568 vb2_start_streaming+0xdc/0x160 [238870.260703] Modules linked in: uvcvideo videobuf2_vmalloc spidev nvidia_modeset(O) fuse xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter lzo_rle lzo_compress zram overlay ramoops reed_solomon bnep snd_soc_tegra186_asrc snd_soc_tegra210_ope snd_soc_tegra186_dspk snd_soc_tegra210_mvc snd_soc_tegra186_arad snd_soc_tegra210_iqc snd_soc_tegra210_afc snd_soc_tegra210_dmic snd_soc_tegra210_amx snd_soc_tegra210_adx aes_ce_blk crypto_simd snd_soc_tegra210_i2s snd_soc_tegra210_mixer cryptd snd_soc_tegra210_admaif snd_soc_tegra210_sfc aes_ce_cipher snd_soc_tegra_pcm rtk_btusb ghash_ce input_leds sha2_ce btusb sha256_arm64 btrtl snd_soc_tegra210_adsp sha1_ce btbcm snd_soc_tegra_machine_driver btintel snd_soc_tegra_utils snd_soc_spdif_tx snd_soc_simple_card_utils rtl8822ce fusb301 nvadsp snd_hda_codec_hdmi tegra_bpmp_thermal snd_soc_tegra210_ahub r8168 tegra210_adma userspace_alert [238870.260879] snd_hda_tegra snd_hda_codec snd_hda_core nv_imx477 r8169 cfg80211 spi_tegra114 realtek nvidia(O) binfmt_misc loop ina3221 pwm_fan nvgpu nvmap ip_tables x_tables [last unloaded: mtd] [238870.260928] CPU: 2 PID: 27870 Comm: a.out Tainted: G O 5.10.104-tegra #1 [238870.260932] Hardware name: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 3.0-32616947 02/21/2023 [238870.260938] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [238870.260943] pc : vb2_start_streaming+0xdc/0x160 [238870.260946] lr : vb2_start_streaming+0x74/0x160 [238870.260949] sp : ffff80001c8abb10 [238870.260952] x29: ffff80001c8abb10 x28: ffff15259305f500 [238870.260958] x27: 0000000040045612 x26: 0000000000000000 [238870.260965] x25: ffff80001c8abd08 x24: ffff1525032f01f8 [238870.260971] x23: ffff15255f1e0e80 x22: ffff80001c8abd08 [238870.260977] x21: ffff1525032f0858 x20: ffff1525032f0870 [238870.260982] x19: 00000000ffffff87 x18: 0000000000000000 [238870.260988] x17: 0000000000000000 x16: 0000000000000000 [238870.260994] x15: 0000000000000000 x14: 000000000000171a [238870.261000] x13: 0000000000004d26 x12: 0000000000000024 [238870.261006] x11: 0000000000000040 x10: 0000000000000a80 [238870.261012] x9 : 00000000fffffffe x8 : ffff15255f1e0e80 [238870.261018] x7 : ffff000000000000 x6 : 0000000000000001 [238870.261024] x5 : 0000000000000001 x4 : ffff152631bf6de0 [238870.261030] x3 : 0000000000000000 x2 : ffffcb8abbdce170 [238870.261035] x1 : 0000000000000000 x0 : ffff15259938e9f0 [238870.261042] Call trace: [238870.261047] vb2_start_streaming+0xdc/0x160 [238870.261052] vb2_core_streamon+0x9c/0x1a0 [238870.261058] vb2_streamon+0x34/0x80 [238870.261063] vb2_ioctl_streamon+0x58/0x70 [238870.261069] v4l_streamon+0x40/0x50 [238870.261072] __video_do_ioctl+0x188/0x400 [238870.261076] video_usercopy+0x280/0x790 [238870.261080] video_ioctl2+0x40/0x180 [238870.261084] v4l2_ioctl+0x68/0x90 [238870.261094] __arm64_sys_ioctl+0xac/0xf0 [238870.261104] el0_svc_common.constprop.0+0x80/0x1d0 [238870.261108] do_el0_svc+0x38/0xb0 [238870.261115] el0_svc+0x1c/0x30 [238870.261118] el0_sync_handler+0xa8/0xb0 [238870.261124] el0_sync+0x16c/0x180 [238870.261127] ---[ end trace e494fab34b8f5978 ]--- [238965.211463] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [239080.052619] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [239105.879828] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [239490.335264] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [239623.664291] usb 1-2.1: reset high-speed USB device number 7 using tegra-xusb [241017.644213] usb 1-2.1: USB disconnect, device number 7 [241087.757447] usb 1-2.1: new high-speed USB device number 8 using tegra-xusb [241087.869919] usb 1-2.1: New USB device found, idVendor=0c45, idProduct=636d, bcdDevice= 1.00 [241087.869928] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [241087.869932] usb 1-2.1: Product: Arducam IMX477 HQ Camera [241087.869936] usb 1-2.1: Manufacturer: Arducam Technology Co., Ltd. [241087.869939] usb 1-2.1: SerialNumber: UC517 [241087.873554] uvcvideo: Found UVC 1.00 device Arducam IMX477 HQ Camera (0c45:636d) [241087.895365] input: Arducam IMX477 HQ Camera: Arduc as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input9 [241087.901893] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [241088.218902] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [241088.294804] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [241918.252495] usb 1-2.1: USB disconnect, device number 8 [241928.460189] usb 1-2.1: new high-speed USB device number 9 using tegra-xusb [241928.933540] usb 1-2.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 1.00 [241928.933551] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [241928.933555] usb 1-2.1: Product: HD Webcam C270 [241928.933559] usb 1-2.1: Manufacturer: HD Webcam C270 [241928.936813] uvcvideo: Found UVC 1.00 device HD Webcam C270 (046d:0825) [241928.941565] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1). [241928.972638] input: HD Webcam C270: HD Webcam C270 as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input10 [241928.982304] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [241929.033048] usb 1-2.1: set resolution quirk: cval->res = 384 [241929.221790] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [241929.301693] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [242122.622817] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [242416.483452] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244260.050297] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244276.398414] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244387.991177] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244396.131408] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244467.985641] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244528.251858] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244595.630268] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244685.016499] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244715.819892] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [244935.078219] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [245166.265045] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [245614.898548] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [245655.077506] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [246272.197856] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [252030.703846] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [252093.586934] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [252273.750703] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [252739.983731] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [252750.991483] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [253111.867203] usb 1-2.1: reset high-speed USB device number 9 using tegra-xusb [254201.133029] usb 1-2.1: USB disconnect, device number 9 [254475.786590] usb 1-2.1: new high-speed USB device number 10 using tegra-xusb [254476.259538] usb 1-2.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 1.00 [254476.259547] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [254476.259551] usb 1-2.1: Product: HD Webcam C270 [254476.259555] usb 1-2.1: Manufacturer: HD Webcam C270 [254476.262837] uvcvideo: Found UVC 1.00 device HD Webcam C270 (046d:0825) [254476.267531] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1). [254476.299110] input: HD Webcam C270: HD Webcam C270 as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input11 [254476.308905] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [254476.361814] usb 1-2.1: set resolution quirk: cval->res = 384 [254476.538451] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [254476.619804] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [254579.512258] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [254807.990439] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [254899.780221] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255034.501342] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255095.799699] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255179.497794] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255349.009743] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255440.743577] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255540.580862] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255550.836688] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [255623.346888] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [257088.008270] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [257219.493689] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [257357.630464] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [257551.673560] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [257558.025562] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258341.981685] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258427.586903] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258514.880244] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258631.445261] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258790.644888] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258879.070560] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258931.817209] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [258965.124448] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259058.534142] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259124.432325] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259244.801545] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259303.035767] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259492.795387] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259561.505337] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259624.403950] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259693.710053] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259799.923631] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259843.398945] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [259895.641039] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [260095.488290] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [260206.520993] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [260265.723119] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [260458.081247] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [260466.996984] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [260581.193996] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [264106.008756] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [264890.255352] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [265009.829377] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [265184.838271] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [266631.094754] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [268211.710081] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [268304.708112] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [268401.084874] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [268798.607386] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [269846.022766] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [270001.838787] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [270171.290440] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [270215.377659] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [270340.514302] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [270421.440631] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [321322.895239] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [326002.162287] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [326002.394206] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [326003.127231] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [326003.358930] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [326008.087292] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [326150.454511] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [326204.440970] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [326300.506741] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [327472.056683] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [327577.353998] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [327595.565342] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [327946.016386] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [328048.415740] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [328154.451894] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [335555.785822] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [335620.120355] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [335734.214034] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [335834.879640] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [335926.345562] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336011.703374] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336185.773342] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336294.334471] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336374.251992] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336406.853449] uvcvideo: Failed to resubmit video URB (-1). [336468.109590] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336617.797654] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336705.855191] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [336779.913662] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [342096.730259] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [413157.753177] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [413158.084337] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [413158.928595] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [413159.160534] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [414636.626367] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [414653.545964] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [414721.652138] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [414846.152948] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [415503.757882] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [417147.280720] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [417922.558945] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [417943.026275] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [418452.572636] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [418686.430666] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [418741.349007] usb 1-2.1: reset high-speed USB device number 10 using tegra-xusb [418802.988966] usb 1-2.1: USB disconnect, device number 10 [418810.635173] usb 1-2.1: new high-speed USB device number 11 using tegra-xusb [418811.108165] usb 1-2.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 1.00 [418811.108175] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [418811.108180] usb 1-2.1: Product: HD Webcam C270 [418811.108183] usb 1-2.1: Manufacturer: HD Webcam C270 [418811.111428] uvcvideo: Found UVC 1.00 device HD Webcam C270 (046d:0825) [418811.116149] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1). [418811.146879] input: HD Webcam C270: HD Webcam C270 as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input12 [418811.156542] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [418811.206954] usb 1-2.1: set resolution quirk: cval->res = 384 [418811.371001] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [418811.452304] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [418831.166646] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [418886.229692] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [418901.125090] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [418913.874234] bwmgr API not supported [418913.874925] regmap_util_write_table_8:regmap_util_write_table:-121 [418913.878642] imx477 9-001a: Error writing mode [418916.392807] tegra-camrtc-capture-vi tegra-capture-vi: uncorr_err: request timed out after 2500 ms [418916.402093] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: attempting to reset the capture channel [418916.413165] (NULL device *): vi_capture_control_message: NULL VI channel received [418916.421029] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_close: Error in closing stream_id=1, csi_port=1 [418916.431817] (NULL device *): vi_capture_control_message: NULL VI channel received [418916.439746] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: csi5_stream_open: VI channel not found for stream- 1 vc- 0 [418916.450732] tegra-camrtc-capture-vi tegra-capture-vi: err_rec: successfully reset the capture channel [418916.461917] ------------[ cut here ]------------ [418916.461936] WARNING: CPU: 1 PID: 53319 at drivers/media/common/videobuf2/videobuf2-core.c:1568 vb2_start_streaming+0xdc/0x160 [418916.473654] Modules linked in: uvcvideo videobuf2_vmalloc spidev nvidia_modeset(O) fuse xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter lzo_rle lzo_compress zram overlay ramoops reed_solomon bnep snd_soc_tegra186_asrc snd_soc_tegra210_ope snd_soc_tegra186_dspk snd_soc_tegra210_mvc snd_soc_tegra186_arad snd_soc_tegra210_iqc snd_soc_tegra210_afc snd_soc_tegra210_dmic snd_soc_tegra210_amx snd_soc_tegra210_adx aes_ce_blk crypto_simd snd_soc_tegra210_i2s snd_soc_tegra210_mixer cryptd snd_soc_tegra210_admaif snd_soc_tegra210_sfc aes_ce_cipher snd_soc_tegra_pcm rtk_btusb ghash_ce input_leds sha2_ce btusb sha256_arm64 btrtl snd_soc_tegra210_adsp sha1_ce btbcm snd_soc_tegra_machine_driver btintel snd_soc_tegra_utils snd_soc_spdif_tx snd_soc_simple_card_utils rtl8822ce fusb301 nvadsp snd_hda_codec_hdmi tegra_bpmp_thermal snd_soc_tegra210_ahub r8168 tegra210_adma userspace_alert [418916.473766] snd_hda_tegra snd_hda_codec snd_hda_core nv_imx477 r8169 cfg80211 spi_tegra114 realtek nvidia(O) binfmt_misc loop ina3221 pwm_fan nvgpu nvmap ip_tables x_tables [last unloaded: mtd] [418916.473800] CPU: 1 PID: 53319 Comm: read_thread Tainted: G W O 5.10.104-tegra #1 [418916.473802] Hardware name: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 3.0-32616947 02/21/2023 [418916.473806] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [418916.473808] pc : vb2_start_streaming+0xdc/0x160 [418916.473810] lr : vb2_start_streaming+0x74/0x160 [418916.473812] sp : ffff80001c56bb10 [418916.473814] x29: ffff80001c56bb10 x28: ffff152573911400 [418916.473817] x27: 0000000040045612 x26: 0000000000000000 [418916.473821] x25: ffff80001c56bd08 x24: ffff1525032f01f8 [418916.473824] x23: ffff152535eeba00 x22: ffff80001c56bd08 [418916.473827] x21: ffff1525032f0858 x20: ffff1525032f0870 [418916.473830] x19: 00000000ffffff87 x18: 0000000000000000 [418916.473832] x17: 0000000000000000 x16: 0000000000000000 [418916.473836] x15: 0000000000000000 x14: 0000000000000000 [418916.473838] x13: 0000000000000003 x12: 0000000000000500 [418916.473841] x11: 0000000000000040 x10: 0000000000000a80 [418916.473844] x9 : 00000000fffffffe x8 : ffff152535eeba00 [418916.473847] x7 : ffff000000000000 x6 : 0000000000000001 [418916.473850] x5 : 0000000000000001 x4 : ffff152631bd6de8 [418916.473852] x3 : 0000000000000000 x2 : ffffcb8abbdce170 [418916.473855] x1 : 0000000000000000 x0 : ffff15251ca875f0 [418916.473859] Call trace: [418916.473862] vb2_start_streaming+0xdc/0x160 [418916.473865] vb2_core_streamon+0x9c/0x1a0 [418916.473868] vb2_streamon+0x34/0x80 [418916.473870] vb2_ioctl_streamon+0x58/0x70 [418916.473875] v4l_streamon+0x40/0x50 [418916.473877] __video_do_ioctl+0x188/0x400 [418916.473879] video_usercopy+0x280/0x790 [418916.473880] video_ioctl2+0x40/0x180 [418916.473883] v4l2_ioctl+0x68/0x90 [418916.473889] __arm64_sys_ioctl+0xac/0xf0 [418916.473896] el0_svc_common.constprop.0+0x80/0x1d0 [418916.473898] do_el0_svc+0x38/0xb0 [418916.473903] el0_svc+0x1c/0x30 [418916.473905] el0_sync_handler+0xa8/0xb0 [418916.473908] el0_sync+0x16c/0x180 [418916.473911] ---[ end trace e494fab34b8f5979 ]--- [418920.320440] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [418942.203871] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [419019.862286] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [419165.846449] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [419204.533494] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [419289.035942] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [419331.934745] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [430728.059404] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [430972.869265] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [431187.940344] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [431282.377941] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [431338.801080] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [431639.161612] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [432106.422875] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [432191.825015] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [432251.051243] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [432444.938842] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [432540.896147] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [432723.939724] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [433258.827026] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [433805.110675] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [433889.720128] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [433992.725734] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [434060.740534] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [434165.157831] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [434235.900005] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [434433.182813] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [434537.707950] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [435950.979439] nvdec 15480000.nvdec: RISC-V desc binary name:nvhost_nvdec050_desc_prod.bin [435951.118294] nvdec 15480000.nvdec: RISC-V booting from GSC [435951.130334] nvdec 15480000.nvdec: RISCV boot success [435985.743507] nvdec 15480000.nvdec: RISC-V booting from GSC [435985.748111] nvdec 15480000.nvdec: RISCV boot success [436046.527660] nvdec 15480000.nvdec: RISC-V booting from GSC [436046.531899] nvdec 15480000.nvdec: RISCV boot success [490362.681884] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [490362.911553] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [490363.531053] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [490363.759786] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [490444.492343] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [490492.371316] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [491017.363999] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [491313.217584] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [491422.347164] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [495372.691758] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [495448.702057] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [495604.418564] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [495645.997693] uvcvideo: Failed to resubmit video URB (-1). [495733.395417] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [495824.616862] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [495903.258760] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [497130.640777] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [497265.298162] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [498106.862481] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [498135.493845] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [498358.936806] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [498380.768314] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [498661.017959] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [499408.664916] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [499647.679419] usb 1-2.1: reset high-speed USB device number 11 using tegra-xusb [499927.003972] ------------[ cut here ]------------ [499927.008840] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out [499927.008877] WARNING: CPU: 4 PID: 0 at net/sched/sch_generic.c:467 dev_watchdog+0x394/0x3a0 [499927.017502] Modules linked in: uvcvideo videobuf2_vmalloc spidev nvidia_modeset(O) fuse xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter lzo_rle lzo_compress zram overlay ramoops reed_solomon bnep snd_soc_tegra186_asrc snd_soc_tegra210_ope snd_soc_tegra186_dspk snd_soc_tegra210_mvc snd_soc_tegra186_arad snd_soc_tegra210_iqc snd_soc_tegra210_afc snd_soc_tegra210_dmic snd_soc_tegra210_amx snd_soc_tegra210_adx aes_ce_blk crypto_simd snd_soc_tegra210_i2s snd_soc_tegra210_mixer cryptd snd_soc_tegra210_admaif snd_soc_tegra210_sfc aes_ce_cipher snd_soc_tegra_pcm rtk_btusb ghash_ce input_leds sha2_ce btusb sha256_arm64 btrtl snd_soc_tegra210_adsp sha1_ce btbcm snd_soc_tegra_machine_driver btintel snd_soc_tegra_utils snd_soc_spdif_tx snd_soc_simple_card_utils rtl8822ce fusb301 nvadsp snd_hda_codec_hdmi tegra_bpmp_thermal snd_soc_tegra210_ahub r8168 tegra210_adma userspace_alert [499927.017599] snd_hda_tegra snd_hda_codec snd_hda_core nv_imx477 r8169 cfg80211 spi_tegra114 realtek nvidia(O) binfmt_misc loop ina3221 pwm_fan nvgpu nvmap ip_tables x_tables [last unloaded: mtd] [499927.017630] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W O 5.10.104-tegra #1 [499927.017632] Hardware name: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 3.0-32616947 02/21/2023 [499927.017636] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [499927.017638] pc : dev_watchdog+0x394/0x3a0 [499927.017640] lr : dev_watchdog+0x394/0x3a0 [499927.017642] sp : ffff800010023d50 [499927.017644] x29: ffff800010023d50 x28: 0000000000000001 [499927.017647] x27: 0000000000000004 x26: 0000000000000140 [499927.017651] x25: ffff152507afee80 x24: 00000000ffffffff [499927.017654] x23: ffff15250b7243dc x22: ffffcb8abd926000 [499927.017657] x21: ffff15250b724000 x20: ffff15250b724480 [499927.017660] x19: 0000000000000000 x18: 0000000000000000 [499927.017663] x17: 0000000000000000 x16: ffffcb8abbc33210 [499927.017666] x15: ffff1525001d13f0 x14: ffffffffffffffff [499927.017670] x13: ffffcb8abdc49de8 x12: ffffcb8abdc49a38 [499927.017673] x11: 0020000000000000 x10: 0000000000000000 [499927.017676] x9 : 00000000fffffffe x8 : 756f2064656d6974 [499927.017679] x7 : 2030206575657571 x6 : c0000000ffffefff [499927.017682] x5 : ffff152631c32958 x4 : ffffcb8abd947968 [499927.017685] x3 : 0000000000000001 x2 : ffff152631c32960 [499927.017688] x1 : 0000000000000000 x0 : 0000000000000000 [499927.017692] Call trace: [499927.017695] dev_watchdog+0x394/0x3a0 [499927.017700] call_timer_fn+0x3c/0x200 [499927.017701] run_timer_softirq+0x464/0x5d0 [499927.017705] __do_softirq+0x140/0x3e8 [499927.017709] irq_exit+0xc0/0xe0 [499927.017714] __handle_domain_irq+0x74/0xd0 [499927.017716] gic_handle_irq+0x68/0x134 [499927.017717] el1_irq+0xd0/0x180 [499927.017722] cpuidle_enter_state+0xb8/0x410 [499927.017724] cpuidle_enter+0x40/0x60 [499927.017727] call_cpuidle+0x44/0x80 [499927.017728] do_idle+0x208/0x270 [499927.017730] cpu_startup_entry+0x30/0x70 [499927.017734] secondary_start_kernel+0x14c/0x170 [499927.017736] ---[ end trace e494fab34b8f597a ]--- [500190.418895] nvdec 15480000.nvdec: RISC-V booting from GSC [500190.423180] nvdec 15480000.nvdec: RISCV boot success [500226.701345] nvdec 15480000.nvdec: RISC-V booting from GSC [500226.705961] nvdec 15480000.nvdec: RISCV boot success [500253.740301] usb 1-2.1: USB disconnect, device number 11 [500254.019130] usb 1-2.1: new high-speed USB device number 12 using tegra-xusb [500254.492054] usb 1-2.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 1.00 [500254.492062] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [500254.492064] usb 1-2.1: Product: HD Webcam C270 [500254.492066] usb 1-2.1: Manufacturer: HD Webcam C270 [500254.495193] uvcvideo: Found UVC 1.00 device HD Webcam C270 (046d:0825) [500254.499917] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1). [500254.530689] input: HD Webcam C270: HD Webcam C270 as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input13 [500254.540301] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [500254.590545] usb 1-2.1: set resolution quirk: cval->res = 384 [500255.459053] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [500255.621311] usb 1-2.1: 3:1: cannot get freq at ep 0x84 [500381.584229] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [500975.245165] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [501647.501001] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [509106.833769] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [510865.549078] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [511387.292871] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [516196.919651] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [517324.548071] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [517776.509144] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [517808.448355] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [517859.763117] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [517879.162641] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [517932.161345] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [518035.138866] usb 1-2.1: reset high-speed USB device number 12 using tegra-xusb [518442.541030] usb 1-2.1: USB disconnect, device number 12 [518515.977805] usb 1-2.1: new high-speed USB device number 13 using tegra-xusb [518516.641917] usb 1-2.1: New USB device found, idVendor=046d, idProduct=08e5, bcdDevice= 0.21 [518516.641927] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [518516.641931] usb 1-2.1: Product: HD Pro Webcam C920 [518516.641935] usb 1-2.1: SerialNumber: 766E463F [518516.643218] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:08e5) [518516.658116] input: HD Pro Webcam C920 as /devices/platform/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/input/input14 [518529.937693] usb 1-2.1: reset high-speed USB device number 13 using tegra-xusb [521142.005439] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521142.012761] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521142.061463] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521142.068752] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521142.112402] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521142.119694] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521142.163140] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521142.170428] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521145.620096] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521145.631845] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521146.620732] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521146.631763] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521171.678537] nvdec 15480000.nvdec: RISC-V booting from GSC [521171.682277] nvdec 15480000.nvdec: RISCV boot success [521208.680889] nvdec 15480000.nvdec: RISC-V booting from GSC [521208.685490] nvdec 15480000.nvdec: RISCV boot success [521234.211688] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521234.218988] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521234.262312] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521234.269594] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521234.312781] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521234.320067] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521234.363314] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521234.370600] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521256.640242] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521256.647559] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521256.691554] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521256.699048] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521256.743046] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521256.750397] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521256.793763] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521256.801096] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521258.948479] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521259.948608] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521271.958290] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521271.969103] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521272.958242] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521277.031296] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521277.042954] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521421.600429] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521421.607739] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521421.651094] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521421.658388] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521421.701703] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521421.708997] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521421.752425] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521421.759712] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521423.944348] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521424.943104] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521434.952550] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521435.953426] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521440.955611] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521482.986986] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521562.653700] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521562.661018] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521562.704977] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [521562.712249] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521562.756864] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521562.764135] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521562.807608] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [521562.814878] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [521591.987799] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521592.000248] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521786.698604] nvdec 15480000.nvdec: RISC-V booting from GSC [521786.703205] nvdec 15480000.nvdec: RISCV boot success [521790.178185] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521790.189379] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521791.179349] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521792.179286] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521792.190095] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521801.185360] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [521803.187366] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521836.210846] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [521837.211501] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [522185.648842] nvdec 15480000.nvdec: RISC-V booting from GSC [522185.653455] nvdec 15480000.nvdec: RISCV boot success [522811.143340] nvdec 15480000.nvdec: RISC-V booting from GSC [522811.147978] nvdec 15480000.nvdec: RISCV boot success [584212.541499] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [584212.770634] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [584213.393689] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [584213.623005] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff: [585299.281665] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [585299.288991] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [585299.332371] tegra210-adsp tegra210-adsp: Broken Path1 - FE not linked to BE [585299.339660] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [585299.383046] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [585299.390336] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [585299.434362] tegra210-adsp tegra210-adsp: Broken Path2 - FE not linked to BE [585299.441655] tegra210-adsp tegra210-adsp: ASoC: error at snd_soc_component_open on tegra210-adsp: -32 [585309.651227] uvcvideo: Failed to query (SET_CUR) UVC control 6 on unit 1: -32 (exp. 2). [585310.650989] uvcvideo: Failed to query (SET_CUR) UVC control 4 on unit 1: -32 (exp. 4). [585338.459888] nvdec 15480000.nvdec: RISC-V booting from GSC [585338.464131] nvdec 15480000.nvdec: RISCV boot success