[0000.270] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-7e6ef1bd) [0000.279] I> Default Heap @ [0xd486400 - 0xd488400] [0000.283] I> DMA Heap @ [0x84900000 - 0x85300000] [0000.288] I> bit @ 0xd480000 [0000.291] I> BR-BCT relocated to 0xf7f20000 [0000.295] I> Boot-device: eMMC [0000.299] I> pmic: reset reason (nverc) : 0x10 [0000.303] I> Reading GPT from 512 for device 00000003 [0000.309] I> Reading GPT from 8388096 for device 00000003 [0000.316] I> Found 6 partitions in 00000003 device [0000.321] I> Reading GPT from 512 for device 00010003 [0000.328] I> Found 17 partitions in 00010003 device [0000.333] W> No valid slot number is found in scratch register [0000.338] W> Return default slot: _a [0000.342] I> A/B: bin_type (16) slot 0 [0000.345] I> Select partition: bpmp-fw [0000.349] I> Loading partition bpmp-fw at 0xf7600000 [0000.354] I> Reading two headers - addr:0xf7600000 blocks:1 [0000.359] I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1 [0000.374] I> Binary(16) of size 524192 is loaded @ 0xf7600000 [0000.380] W> No valid slot number is found in scratch register [0000.386] W> Return default slot: _a [0000.389] I> A/B: bin_type (17) slot 0 [0000.393] I> Select partition: bpmp-fw-dtb [0000.397] I> Loading partition bpmp-fw-dtb at 0xf77f0000 [0000.402] I> Reading two headers - addr:0xf77f0000 blocks:1 [0000.407] I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1 [0000.419] I> Binary(17) of size 326672 is loaded @ 0xf77b0200 [0000.546] I> BPMP-FW load address = 0xf7600000 [0000.550] I> BPMP-FW DTB load address = 0x501b0200 [0000.555] I> Loading SCE-FW ... [0000.558] W> No valid slot number is found in scratch register [0000.564] W> Return default slot: _a [0000.567] I> A/B: bin_type (12) slot 0 [0000.571] I> Select partition: sce-fw [0000.574] I> Loading partition sce-fw at 0xf7800000 [0000.579] I> Reading two headers - addr:0xf7800000 blocks:1 [0000.584] I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1 [0000.593] I> Binary(12) of size 65088 is loaded @ 0xf7800000 [0000.599] I> Init SCE [0000.601] I> Copy BTCM section [0000.604] W> No valid slot number is found in scratch register [0000.609] W> Return default slot: _a [0000.613] I> A/B: bin_type (13) slot 0 [0000.616] I> Select partition: cpu-bootloader [0000.621] I> Loading partition cpu-bootloader at 0x96000000 [0000.626] I> Reading two headers - addr:0x96000000 blocks:1 [0000.632] I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1 [0000.642] I> Binary(13) of size 194656 is loaded @ 0x96000000 [0000.647] W> No valid slot number is found in scratch register [0000.653] W> Return default slot: _a [0000.657] I> A/B: bin_type (20) slot 0 [0000.660] I> Select partition: bootloader-dtb [0000.664] I> Loading partition bootloader-dtb at 0x85300000 [0000.670] I> Reading two headers - addr:0x85300000 blocks:1 [0000.675] I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1 [0000.686] I> Binary(20) of size 247936 is loaded @ 0x85300000 [0000.692] I> MB2-params @ 0xf7f00000 [0000.695] I> CPUBL-params @ 0xf7f00000 [0000.699] I> CPU-BL loaded at : 0x96000000 [0000.703] I> Loading TOS ... [0000.706] W> No valid slot number is found in scratch register [0000.711] W> Return default slot: _a [0000.715] I> A/B: bin_type (14) slot 0 [0000.718] I> Select partition: secure-os [0000.722] I> Loading partition secure-os at 0x8490f400 [0000.727] I> Reading two headers - addr:0x8490f400 blocks:1 [0000.733] I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1 [0000.741] I> Binary(14) of size 54384 is loaded @ 0x8490f400 [0000.747] I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000 [0000.754] I> Erasing Monitor @ 0x8490f600 [0000.758] I> Unhalting SCE [0000.762] I> Waypoint2-ACK: 0x5200b8d0 [0000.766] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.2(release):ff7a644 NOTICE: BL31: Built : 18:01:59, Feb 8 2017 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0001.134] I> Welcome to Cboot [0001.137] I> Cboot Version: 00.00.2014.50-t186-f89a1b0e [0001.142] I> CPU-BL Params @ 0xf7f00000 [0001.146] I> 0) Base:0x00000000 Size:0x00000000 [0001.150] I> 1) Base:0xf7e00000 Size:0x00100000 [0001.155] I> 2) Base:0xf7d00000 Size:0x00100000 [0001.159] I> 3) Base:0xf7c00000 Size:0x00100000 [0001.163] I> 4) Base:0xf7b00000 Size:0x00100000 [0001.168] I> 5) Base:0xf7a00000 Size:0x00100000 [0001.172] I> 6) Base:0xf7600000 Size:0x00200000 [0001.177] I> 7) Base:0xf7000000 Size:0x00400000 [0001.181] I> 8) Base:0xf7900000 Size:0x00100000 [0001.186] I> 9) Base:0xf7800000 Size:0x00100000 [0001.190] I> 10) Base:0xf6800000 Size:0x00800000 [0001.194] I> 11) Base:0x30000000 Size:0x00040000 [0001.199] I> 12) Base:0xf7500000 Size:0x00100000 [0001.203] I> 13) Base:0x30040000 Size:0x00001000 [0001.208] I> 14) Base:0x30048000 Size:0x00001000 [0001.212] I> 15) Base:0x30049000 Size:0x00001000 [0001.217] I> 16) Base:0x3004a000 Size:0x00001000 [0001.221] I> 17) Base:0x3004b000 Size:0x00001000 [0001.225] I> 18) Base:0x3004c000 Size:0x00001000 [0001.230] I> 19) Base:0x3004d000 Size:0x00001000 [0001.234] I> 20) Base:0x3004e000 Size:0x00001000 [0001.239] I> 21) Base:0x3004f000 Size:0x00001000 [0001.243] I> 22) Base:0x00000000 Size:0x00000000 [0001.248] I> 23) Base:0xf7ff0000 Size:0x00010000 [0001.252] I> 24) Base:0x00000000 Size:0x00000000 [0001.256] I> 25) Base:0x00000000 Size:0x00000000 [0001.261] I> 26) Base:0x00000000 Size:0x00000000 [0001.265] I> 27) Base:0x00000000 Size:0x00000000 [0001.270] I> 28) Base:0x84400000 Size:0x00400000 [0001.274] I> 29) Base:0x30000000 Size:0x00010000 [0001.279] I> 30) Base:0xf8000000 Size:0x08000000 [0001.283] I> 31) Base:0x00000000 Size:0x00000000 [0001.287] I> 32) Base:0xf6000000 Size:0x00600000 [0001.292] I> 33) Base:0x80000000 Size:0x76000000 [0001.296] I> 34) Base:0x100000000 Size:0x180000000 [0001.301] I> 35) Base:0x00000000 Size:0x00000000 [0001.305] I> 36) Base:0x00000000 Size:0x00000000 [0001.310] I> 37) Base:0xf7fc0000 Size:0x00020000 [0001.314] I> 38) Base:0x84000000 Size:0x00400000 [0001.319] I> 39) Base:0x96000000 Size:0x02000000 [0001.323] I> 40) Base:0x84800000 Size:0x00b00000 [0001.327] I> 41) Base:0xf7f00000 Size:0x00080000 [0001.332] I> 42) Base:0x00000000 Size:0x00000000 [0001.336] I> 43) Base:0x00000000 Size:0x00000000 [0001.341] platform_init_interrupts-121, 1* [0001.345] Interrupts Init done [0001.348] calling constructors [0001.351] initializing heap [0001.354] initializing threads [0001.357] initializing timers [0001.360] creating bootstrap completion thread [0001.365] top of bootstrap2() [0001.368] CPU: ARM Cortex A57 [0001.371] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.376] initializing platform [0001.379] I> Boot-device: eMMC [0001.383] I> odm data is 1090000 [0001.386] I> Reading GPT from 512 for device 00000003 [0001.392] I> Reading GPT from 8388096 for device 00000003 [0001.398] I> Found 6 partitions in 00000003 device [0001.403] I> Reading GPT from 512 for device 00010003 [0001.409] I> Found 17 partitions in 00010003 device [0001.413] W> No valid slot number is found in scratch register [0001.419] W> Return default slot: _a [0001.422] I> A/B: bin_type (1) slot 0 [0001.426] I> Select partition: kernel-dtb [0001.430] I> Loading partition kernel-dtb at 0x92000000 [0001.439] I> Kernel_dtb @0x92000000 [0001.442] I> Bl_dtb @0x85300000 [0001.445] I> gpio framework initialized [0001.449] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0001.456] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0001.463] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.471] E> tca9539_device_init: failed to write polar reg [0001.476] E> tegrabl_tca9539_init: failed to init device! [0001.481] E> GPIO TCA9539 driver init failed [0001.486] E> tegrabl_blob_init: BMP partition does not have valid Blob [0001.492] E> tegrabl_load_bmp_blob: BMP blob initialization failed [0001.498] W> Loading bmp blob to memory failed [0001.507] I> Find /i2c@c250000's alias i2c7 [0001.511] I> Reading eeprom i2c=7 address=0x50 [0001.540] I> Device at /i2c@c250000:0x50 [0001.544] I> Reading eeprom i2c=7 address=0x57 [0001.573] I> Device at /i2c@c250000:0x57 [0001.577] I> Find /i2c@c240000's alias i2c1 [0001.581] I> Reading eeprom i2c=1 address=0x51 [0001.587] I> Eeprom read failed 0x1a800027 [0001.592] I> Find /i2c@3160000's alias i2c0 [0001.596] I> Reading eeprom i2c=0 address=0x50 [0001.601] I> Eeprom read failed 0x1a800027 [0001.606] I> Find /i2c@3180000's alias i2c2 [0001.610] I> Reading eeprom i2c=2 address=0x54 [0001.614] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.619] C> GPIO driver for chip_id 0x2 could not be found [0001.624] E> cam_eeprom_read: Can't get gpio driver [0001.629] I> Eeprom read failed 0x2693400d [0001.633] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.638] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.649] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0001.654] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.665] initializing target [0001.668] calling apps_init() [0001.671] starting app android_boot_app [0001.675] I> Gpio keyboard init success [0001.679] I> Kernel type = Normal [0001.682] I> Loading kernel/boot.img ... [0001.686] W> No valid slot number is found in scratch register [0001.691] W> Return default slot: _a [0001.695] I> A/B: bin_type (0) slot 0 [0001.698] I> Select partition: kernel [0001.702] I> Loading partition kernel at 0xa8000000 [0001.783] W> No valid slot number is found in scratch register [0001.789] W> Return default slot: _a [0001.792] I> A/B: bin_type (1) slot 0 [0001.795] I> Select partition: kernel-dtb [0001.799] I> Loading partition kernel-dtb at 0x92000000 [0001.808] I> Kernel DTB @ 0x92000000 [0001.812] I> Verified boot state = Orange [0001.815] E> tegrabl_display_clear: display is not initialized [0001.821] I> Checking boot.img header magic ... [0001.825] I> [OK] [0001.827] I> Valid boot.img @ 0xa8000000 [0001.831] I> decompressor handler not found [0001.835] I> Copying kernel image (462634 bytes) from 0xa8000800 to 0x80080000 ... [0001.842] I> Done [0001.844] I> Move ramdisk (len: 6249321) from 0xa8071800 to 0x98000000 [0001.853] I> Updated bpmp info to DTB [0001.859] I> Ramdisk: Base: 0x98000000; Size: 0x5f5b69 [0001.864] I> Updated initrd info to DTB [0001.868] I> disabled_core_mask: 0xffffff0c [0001.872] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 vpr_resize sdhci_tegra.en_boot_part_access=1 [0001.904] I> Updated bootarg info to DTB [0001.909] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:9e:65 [0001.915] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:9e:66 [0001.921] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:9e:67 [0001.927] E> "ids" doesn't exist, creating [0001.931] E> "connection" doesn't exist, creating [0001.936] E> "configs" doesn't exist, creating [0001.940] I> create_pm_ids: id: 3310-1000-B00-E, len: 15 [0001.945] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.956] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0001.961] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.972] I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50 [0001.979] E> "i2c@c250000" doesn't exist, creating [0001.984] E> "module@0x50" doesn't exist, creating [0001.989] I> Adding plugin-manager/ids/XXXX-XXXX-XXX=/i2c@c250000:module@0x57 [0001.996] E> "module@0x57" doesn't exist, creating [0002.003] I> Adding plugin-manager/ids/3310-1000-B00-E [0002.010] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.015] I> Adding plugin-manager/configs/3310-power-config 00 [0002.021] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.027] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.033] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.039] I> Adding plugin-manager/configs/3310-display-config 00 [0002.045] E> "chip-id" doesn't exist, creating [0002.049] I> Adding plugin-manager/chip-id/A02P [0002.055] I> Updated memory info to DTB [0002.061] E> "reset" doesn't exist, creating [0002.065] E> "pmc-reset-reason" doesn't exist, creating [0002.070] E> "pmic-reset-reason" doesn't exist, creating [0002.076] I> disabled_core_mask: 0xffffff0c [0002.086] I> tegrabl_load_kernel_and_dtb: Done U-Boot 2016.07-g5971907 (Feb 08 2017 - 18:01:58 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 462 bytes read in 86 ms (4.9 KiB/s) p2771-0000 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/Image 18823872 bytes read in 501 ms (35.8 MiB/s) append: fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 gpt tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0335115020673 vpr_resize root=/dev/mmcblk0p1 rw rootwait ## Flattened Device Tree blob at 92000000 Booting using the fdt blob at 0x92000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000092000000, end 0000000092041814 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.15-tegra (buildbrain@mobile-u64-847) (gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Wed Feb 8 18:06:32 PST 2017 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Reserved memory: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] Reserved memory: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000f2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1ffcaa000 s31104 r8192 d30336 u69632 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2019520 [ 0.000000] Kernel command line: fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 gpt tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0335115020673 vpr_resize root=/dev/mmcblk0p1 rw rootwait [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7280352K/8206336K available (10128K kernel code, 1654K rwdata, 5340K rodata, 1132K init, 677K bss, 172320K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc2000000 - 0xffffffbdca000000 ( 128 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] .init : 0xffffffc000f9c000 - 0xffffffc0010b7000 ( 1132 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000f9c000 ( 15472 KB) [ 0.000000] .data : 0xffffffc0010d6000 - 0xffffffc001273ac0 ( 1655 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008869] tegra-id: chipid=21817. [ 0.012692] tegra-id: opt_subrevision=1. [ 0.017475] Console: colour dummy device 80x25 [ 0.022425] console [tty0] enabled [ 0.025956] kmemleak: Kernel memory leak detector disabled [ 0.031651] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.042409] pid_max: default: 32768 minimum: 301 [ 0.047235] Security Framework initialized [ 0.051507] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.058646] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.066580] Initializing cgroup subsys freezer [ 0.071201] Initializing cgroup subsys debug [ 0.075761] CPU0 ipc=752 [ 0.078400] CPU1 ipc=1024 [ 0.081122] CPU2 ipc=1024 [ 0.083839] CPU3 ipc=752 [ 0.086471] CPU4 ipc=752 [ 0.089102] CPU5 ipc=752 [ 0.091756] ASID allocator initialised with 65536 entries [ 0.133952] CPU1: Booted secondary processor [4e0f0030] [ 0.145507] CPU2: Booted secondary processor [4e0f0030] [ 0.157361] CPU3: Booted secondary processor [411fd073] [ 0.169348] CPU4: Booted secondary processor [411fd073] [ 0.181353] CPU5: Booted secondary processor [411fd073] [ 0.181391] Brought up 6 CPUs [ 0.211591] SMP: Total of 6 processors activated. [ 0.216477] CPU: All CPU(s) started at EL2 [ 0.221107] devtmpfs: initialized [ 0.247903] Initilizing CustomIPI irq domain [ 0.252546] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.273026] pinctrl core: initialized pinctrl subsystem [ 0.278828] OS set in device tree is L4T. [ 0.283549] regulator-dummy: no parameters [ 0.288078] Initializing plugin-manager [ 0.292147] Plugin module not found [ 0.296218] node /plugin-manager/soc-prod-a02-fragment match with chip-id A02P [ 0.304149] node /plugin-manager/fragement@0 match with odm-data enable-tegra-wdt [ 0.312374] node /plugin-manager/fragement@4 match with odm-data enable-tegra-wdt [ 0.320990] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board >=3310-1000-300 [ 0.330614] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board >=3310-1000-300 [ 0.339928] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board >=3310-1000-800 [ 0.349178] node /plugin-manager/fragment-devslp@0 match with board >=3310-1000-200 [ 0.357469] node /plugin-manager/fragment-500-pcie-config match with board >=3310-1000-500 [ 0.366438] node /plugin-manager/fragment-500-xusb-config match with board >=3310-1000-500 [ 0.375340] node /plugin-manager/fragment-500-e3325-pcie match with board >=3310-1000-500 [ 0.384003] node /plugin-manager/fragment-p3310-c00-comm match with board >=3310-1000-800 [ 0.392736] node /plugin-manager/fragment-p3310-c01 match with board >=3310-1000-900 [ 0.401032] node /plugin-manager/fragment-p3310-c03 match with board >=3310-1000-B00 [ 0.410392] node /plugin-manager/fragment-p3310-c00-camera match with board >=3310-1000-800 [ 0.422219] Adding domain adsp-pd to PM domain ape-pd [ 0.431529] NET: Registered protocol family 16 [ 0.437650] console [pstore-1] enabled [ 0.441596] pstore: Registered ramoops as persistent store backend [ 0.448086] ramoops: attached 0x200000@0x100000000, ecc: 0/0 [ 0.461972] cpuidle: using governor ladder [ 0.473964] cpuidle: using governor menu [ 0.479694] bpmp: waiting for handshake [ 0.483714] bpmp: handshake completed [ 0.487587] bpmp: synchronizing channels [ 0.491803] bpmp: channels synchronized [ 0.495840] bpmp: connect returned 0 [ 0.500097] tegra186-pmc device create success [ 0.504747] scratch reg offset dts data not present [ 0.509958] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.517497] PMC: configuring io pad defaults [ 0.521993] T186 pmc padctrl driver initialized [ 0.526762] ### PMC reset source: Power on reset [ 0.531588] ### PMC reset level: L0 [ 0.535231] ### PMC reset status reg: 0x0 [ 0.540131] vdso: 2 pages (1 code @ ffffffc0010dd000, 1 data @ ffffffc0010dc000) [ 0.547910] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.556486] atomic_pool_init():526: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.566641] tegra_powergate_init: DONE [ 0.570690] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.4/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.589534] DTB Build time: Feb 8 2017 18:07:45 [ 0.595800] Tegra reboot handler registered. [ 0.601621] Registering Tegra186 clocks (this may take a while)...done [ 0.610196] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.617034] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.621966] arm-smmu 12000000.iommu: stage 1 translation [ 0.627622] arm-smmu 12000000.iommu: stage 2 translation [ 0.633275] arm-smmu 12000000.iommu: nested translation [ 0.638838] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.647601] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.658610] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.665543] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.672378] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.719319] arm-smmu 12000000.iommu: registered 66 master devices [ 0.729811] iommu: Adding device 3460000.sdhci to group 0 [ 0.736069] iommu: Adding device 3400000.sdhci to group 1 [ 0.744694] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.751109] iommu: Adding device 3160000.i2c to group 3 [ 0.756924] iommu: Adding device c240000.i2c to group 4 [ 0.762664] iommu: Adding device 3180000.i2c to group 5 [ 0.768435] iommu: Adding device 3190000.i2c to group 6 [ 0.774270] iommu: Adding device 31b0000.i2c to group 7 [ 0.780017] iommu: Adding device 31c0000.i2c to group 8 [ 0.785765] iommu: Adding device c250000.i2c to group 9 [ 0.791486] iommu: Adding device 31e0000.i2c to group 10 [ 0.798778] iommu: Adding device 3210000.spi to group 11 [ 0.804666] iommu: Adding device c260000.spi to group 12 [ 0.810505] iommu: Adding device 3240000.spi to group 13 [ 0.816735] iommu: Adding device 3100000.serial to group 14 [ 0.822852] iommu: Adding device 3110000.serial to group 15 [ 0.829022] iommu: Adding device 3130000.serial to group 16 [ 0.835845] iommu: Adding device 2490000.ether_qos to group 17 [ 0.842365] iommu: Adding device b000000.rtcpu to group 18 [ 0.848879] Wake73 for irq=42 [ 0.852380] iommu: Adding device smmu_test to group 19 [ 0.858381] mc: mapped MMIO address: 0xffffff8000560000 -> 0x2c10000 [ 0.865038] mc: mapped MMIO address: 0xffffff8000640000 -> 0x2c20000 [ 0.871676] mc: mapped MMIO address: 0xffffff8000660000 -> 0x2c30000 [ 0.878317] mc: mapped MMIO address: 0xffffff8000fa0000 -> 0x2c40000 [ 0.884958] mc: mapped MMIO address: 0xffffff8000fc0000 -> 0x2c50000 [ 0.891601] mc-err: Set intmask: 0xf3140 [ 0.895915] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.902917] Wake76 for irq=199 [ 0.906106] Wake77 for irq=199 [ 0.909293] Wake78 for irq=199 [ 0.912479] Wake79 for irq=199 [ 0.915665] Wake80 for irq=199 [ 0.918848] Wake81 for irq=199 [ 0.922032] Wake82 for irq=199 [ 0.925359] iommu: Adding device 3530000.xhci to group 20 [ 0.931412] iommu: Adding device 3550000.xudc to group 21 [ 0.937888] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.944074] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 320 [ 0.951894] iommu: Adding device 13e10000.host1x to group 22 [ 0.958045] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.964596] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.971149] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.977730] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.984300] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.990887] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.997447] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 1.004010] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 1.010748] iommu: Adding device 150c0000.nvcsi to group 31 [ 1.017090] iommu: Adding device 15700000.vi to group 32 [ 1.022929] iommu: Adding device 15600000.isp to group 33 [ 1.028852] iommu: Adding device 15210000.nvdisplay to group 34 [ 1.035272] iommu: Adding device 15340000.vic to group 35 [ 1.041086] iommu: Adding device 154c0000.nvenc to group 36 [ 1.047084] iommu: Adding device 15480000.nvdec to group 37 [ 1.053299] iommu: Adding device 15380000.nvjpg to group 38 [ 1.059289] iommu: Adding device 15500000.tsec to group 39 [ 1.065186] iommu: Adding device 15100000.tsecb to group 40 [ 1.071555] iommu: Adding device 15810000.se to group 41 [ 1.077285] iommu: Adding device 15820000.se to group 42 [ 1.083031] iommu: Adding device 15830000.se to group 43 [ 1.088758] iommu: Adding device 15840000.se to group 44 [ 1.094719] iommu: Adding device 17000000.gp10b to group 45 [ 1.101654] tegra-reset 5000000.clock: registered 193 resets. [ 1.108916] iommu: Adding device d000000.bpmp to group 46 [ 1.114739] bpmp: ping status is 0 [ 1.118444] bpmp d000000.bpmp: firmware tag is 563ea251202ee05681d111e7e9283ca9 [ 1.128444] iommu: Adding device 2600000.dma to group 47 [ 1.134721] GPIO line 461 (cam0-rst) hogged as output/high [ 1.140498] GPIO line 424 (wifi-enable) hogged as output/high [ 1.146532] GPIO line 445 (sdmmc-wake-input) hogged as input [ 1.152472] GPIO line 446 (sdmmc-wake-output) hogged as output/low [ 1.158995] gpiochip_add_data: registered GPIOs 320 to 511 on device: tegra-gpio [ 1.168277] GPIO line 315 (wifi-wake-ap) hogged as input [ 1.174034] gpiochip_add_data: registered GPIOs 256 to 319 on device: tegra-gpio-aon [ 1.182877] iommu: Adding device 10003000.pcie-controller to group 48 [ 1.189819] iommu: Adding device sound to group 49 [ 1.196282] iommu: Adding device 3510000.hda to group 50 [ 1.202872] iommu: Adding device adsp_audio to group 51 [ 1.209582] iommu: Adding device 2993000.adsp to group 52 [ 1.220577] iommu: Adding device c160000.aon to group 53 [ 1.228267] vdd-ac-bat: 5000 mV [ 1.233555] vdd-1v8-ap: 1800 mV [ 1.237930] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 1.243778] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 1.264252] SCSI subsystem initialized [ 1.268511] usbcore: registered new interface driver usbfs [ 1.274282] usbcore: registered new interface driver hub [ 1.279956] usbcore: registered new device driver usb [ 1.287581] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 1.294556] pca953x 0-0074: failed reading register [ 1.299724] pca953x: probe of 0-0074 failed with error -121 [ 1.305798] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 1.312751] pca953x 0-0077: failed reading register [ 1.317918] pca953x: probe of 0-0077 failed with error -121 [ 1.323941] tps65132 0-003e: No active discharge gpio for regulator tps65132-outp [ 1.331901] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [ 1.338999] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [ 1.345974] outp: 4000 <--> 6000 mV [ 1.349723] tps65132 0-003e: No active discharge gpio for regulator tps65132-outn [ 1.357656] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [ 1.364720] tegra-i2c 3160000.i2c: no acknowledge from address 0x3e [ 1.371677] outn: 4000 <--> 6000 mV [ 1.385995] media: Linux media interface: v0.10 [ 1.390766] Linux video capture interface: v2.00 [ 1.399248] pps_core: LinuxPPS API ver. 1 registered [ 1.404441] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.413986] PTP clock support registered [ 1.419745] Tegra WDT setup timeout = 120 seconds. [ 1.424797] tegra_wdt_t18x 30c0000.watchdog: tegra_wdt_t18x_probe done [ 1.433011] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 1.440765] GPIO line 253 (spmic_gpio_input_5) hogged as input [ 1.447027] GPIO line 254 (spmic_gpio_input_6) hogged as input [ 1.453205] gpiochip_add_data: registered GPIOs 248 to 255 on device: max77620-gpio [ 1.466122] vddio-ddr: at 1125 mV [ 1.473968] avdd_dsi_csi: 1200 mV [ 1.481967] vdd-1v8: 1800 mV [ 1.489966] vdd-3v3-sys: 3300 mV [ 1.494418] spmic-ldo0: at 1800 mV [ 1.498810] spmic-ldo1: at 800 mV [ 1.505970] vddio-3v3: 3300 mV [ 1.509993] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 1.517968] vdd-rtc: 1000 mV [ 1.521915] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 1.529970] spmic-ldo6: at 1500 mV [ 1.534343] vdd-pex-1v05: 1000 mV [ 1.538738] dvdd-pex: 1000 mV [ 1.542264] max77620 4-003c: max77620 probe successful [ 1.547873] Advanced Linux Sound Architecture Driver Initialized. [ 1.555573] en-vdd-sd: 3300 mV [ 1.559165] vdd-usb0-5v: 5000 mV [ 1.562989] vdd-usb1-5v: 5000 mV [ 1.566930] vdd-3v3: 3300 mV [ 1.570260] en-vdd-vcm-2v8: 2800 mV [ 1.574178] vdd-sys-bl: 3300 mV [ 1.578462] gpio tegra-gpio wake53 for gpio=159(X:5) [ 1.585379] extcon-gpio-states external-connection:extcon@1: Cable state 2 [ 1.592982] clocksource: Switched to clocksource arch_sys_counter [ 1.629263] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.636328] dma_declare_coherent_resizable_cma_memory:288: resizable heap=vpr, base=0x00000000ae000000, size=0x2a000000 [ 1.644508] Wake76 for irq=199 [ 1.644510] Wake77 for irq=199 [ 1.644512] Wake78 for irq=199 [ 1.644514] Wake79 for irq=199 [ 1.644516] Wake80 for irq=199 [ 1.644517] Wake81 for irq=199 [ 1.644519] Wake82 for irq=199 [ 1.645724] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 1.645953] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 1.646117] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 1.646187] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 1.646586] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type AO-therm [ 1.646730] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tboard_tegra [ 1.646882] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tdiode_tegra [ 1.647043] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type PMIC-Die [ 1.647070] isomgr_init(): iso emc max clk=1866000KHz [ 1.647073] isomgr_init(): max_iso_bw=26870400KB [ 1.647294] tegra186-pmc-iopower pmc-iopower: Rail iopower-sys is having fixed voltage 1800000 [ 1.647357] tegra186-pmc-iopower pmc-iopower: Rail iopower-uart is having fixed voltage 1800000 [ 1.647418] tegra186-pmc-iopower pmc-iopower: Rail iopower-conn is having fixed voltage 1800000 [ 1.647476] tegra186-pmc-iopower pmc-iopower: Rail iopower-edp is having fixed voltage 1800000 [ 1.647538] tegra186-pmc-iopower pmc-iopower: Rail iopower-pex-ctrl-audio is having fixed voltage 1800000 [ 1.647626] tegra186-pmc-iopower pmc-iopower: Rail iopower-ufs is having fixed voltage 1800000 [ 1.647716] tegra186-pmc-iopower pmc-iopower: Rail iopower-ddr0 is having fixed voltage 0 [ 1.647773] tegra186-pmc-iopower pmc-iopower: Rail iopower-ddr1 is having fixed voltage 0 [ 1.647824] tegra186-pmc-iopower pmc-iopower: Rail iopower-csi-dsi is having fixed voltage 1200000 [ 1.647888] tegra186-pmc-iopower pmc-iopower: Rail iopower-cam is having fixed voltage 1800000 [ 1.647948] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc4 is having fixed voltage 1800000 [ 1.648001] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc1-hv is having voltages: 1800000:3300000 [ 1.648071] tegra186-pmc-iopower pmc-iopower: Rail iopower-audio-hv is having fixed voltage 1800000 [ 1.648133] tegra186-pmc-iopower pmc-iopower: Rail iopower-dbg is having fixed voltage 1800000 [ 1.648192] tegra186-pmc-iopower pmc-iopower: Rail iopower-spi is having fixed voltage 1800000 [ 1.648260] tegra186-pmc-iopower pmc-iopower: Rail iopower-ao is having fixed voltage 1800000 [ 1.648311] tegra186-pmc-iopower pmc-iopower: Rail iopower-ao-hv is having fixed voltage 3300000 [ 1.648373] tegra186-pmc-iopower pmc-iopower: Rail iopower-dmic-hv is having fixed voltage 1800000 [ 1.648430] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc2-hv is having fixed voltage 3300000 [ 1.648503] tegra186-pmc-iopower pmc-iopower: Rail iopower-sdmmc3-hv is having voltages: 1800000:3300000 [ 1.648514] tegra186-pmc-iopower pmc-iopower: NO_IO_POWER setting 0x00000000 [ 1.648802] NET: Registered protocol family 2 [ 1.649628] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.650427] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.651687] TCP: Hash tables configured (established 65536 bind 65536) [ 1.651729] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.651869] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.652208] NET: Registered protocol family 1 [ 1.652572] RPC: Registered named UNIX socket transport module. [ 1.652575] RPC: Registered udp transport module. [ 1.652578] RPC: Registered tcp transport module. [ 1.652580] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.652753] Unpacking initramfs... [ 1.826660] Freeing initrd memory: 6100K (ffffffc018000000 - ffffffc0185f5000) [ 1.842648] host1x 13e10000.host1x: initialized [ 1.849809] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.850865] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 1.850991] audit: initializing netlink subsys (disabled) [ 1.851020] audit: type=2000 audit(1.804:1): initialized [ 1.859026] io scheduler noop registered (default) [ 1.864581] Adding domain tsec-pd to PM domain host-pd [ 1.867229] tsec 15500000.tsec: initialized [ 1.868446] tsec 15100000.tsecb: initialized [ 1.868852] Adding domain nvdec-pd to PM domain host-pd [ 1.870775] nvdec 15480000.nvdec: initialized [ 1.871308] Adding domain vic03-pd to PM domain host-pd [ 1.871330] Adding domain msenc-pd to PM domain host-pd [ 1.871350] Adding domain nvjpg-pd to PM domain host-pd [ 1.874702] falcon 15340000.vic: initialized [ 1.875847] falcon 154c0000.nvenc: initialized [ 1.877174] falcon 15380000.nvjpg: initialized [ 1.878203] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.878980] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.879763] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.880522] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.881296] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.882075] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.882844] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.883589] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.884926] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.884944] tegradc 15210000.nvdisplay: Display dc.15210000 registered with id=0 [ 1.884951] DC OR NODE connected to /host1x/sor1 [ 1.885018] parse_tmds_config: No tmds-config node [ 1.885107] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1250000, vi_iso_bw=1500000, max_bw=1500000 [ 1.885110] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.892151] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.892153] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.892155] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.892187] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [ 1.892191] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [ 1.892559] hdmi: couldn't get regulator vdd_hdmi_5v0: -517 [ 1.894027] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [ 1.894550] PD DISP0 index2 UP [ 1.894568] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.894887] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.894963] PD DISP1 index3 UP [ 1.895048] PD DISP2 index4 UP [ 1.895782] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 1.897209] console [ttyS0] disabled [ 1.897219] PD DISP2 index4 DOWN [ 1.897312] PD DISP1 index3 DOWN [ 1.897390] PD DISP0 index2 DOWN [ 1.898815] tegradc 15210000.nvdisplay: probed [ 2.311323] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 2.311399] cma: enabled page replacement for spfn=ae000, epfn=d8000 [ 2.311410] dma_declare_coherent_resizable_cma_memory:335: resizable cma heap=vpr create successful [ 2.311411] nvmap_page_pool_init: Total RAM pages: 2010029 [ 2.311414] nvmap_page_pool_init: nvmap page pool size: 251253 pages (981 MB) [ 2.311509] nvmap_background_zero_thread: PP zeroing thread starting. [ 2.311953] misc nvmap: created heap vpr base 0x00000000ae000000 size (688128KiB) [ 2.313502] Console: switching to colour frame buffer device 80x30 [ 2.387306] tegradc 15210000.nvdisplay: fb registered [ 2.387306] tegradc 15210000.nvdisplay: fb registered [ 2.387534] gpio tegra-gpio wake21 for gpio=121(P:2) [ 2.387534] gpio tegra-gpio wake21 for gpio=121(P:2) [ 2.410042] console [ttyS0] enabled [ 2.410042] console [ttyS0] enabled [ 2.418278] bootconsole [uart0] disabled [ 2.418278] bootconsole [uart0] disabled [ 2.428687] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 2.439741] serial-tegra 3130000.serial: RX in PIO mode [ 2.446807] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 2.459198] gpio tegra-gpio-aon wake35 for gpio=16(V:2) [ 2.465638] nct1008_nct72 7-004c: find device tree node, parsing dt [ 2.473157] nct1008_nct72 7-004c: starting parse dt [ 2.479524] nct1008_nct72 7-004c: success parsing dt [ 2.487639] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 2.531044] tmp451: Enabled overheat logging at 105.00C [ 2.537574] gpio tegra-gpio-aon wake35 for gpio=16(V:2) [ 2.544024] nct1008_nct72 7-004c: nct1008_probe: initialized [ 2.553193] THERMAL EST: found 3 subdevs [ 2.558277] THERMAL EST num_resources: 0 [ 2.563325] [THERMAL EST subdev 0] [ 2.567838] [THERMAL EST subdev 1] [ 2.572305] [THERMAL EST subdev 2] [ 2.576926] thermal thermal_zone8: Registering thermal zone thermal_zone8 for type thermal-fan-est [ 2.587926] THERMAL EST: thz register success. [ 2.593636] THERMAL EST: end of probe, return err: 0 [ 2.599820] tegra_profiler: Branch: Dev [ 2.604442] tegra_profiler: Version: 1.109 [ 2.609252] tegra_profiler: Samples version: 37 [ 2.614463] tegra_profiler: IO version: 20 [ 2.619265] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.624295] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.631572] armv8_pmu: imp: 0x4e, idcode: 0x1 [ 2.636554] armv8_pmu: arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 2 [ 2.643891] armv8_pmu: imp: 0x4e, idcode: 0x1 [ 2.648846] armv8_pmu: arch: AA64 PmuV3 NVIDIA (Denver), type: 6, ver: 2 [ 2.656164] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.661151] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.668406] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.673413] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.680682] armv8_pmu: imp: 0x41, idcode: 0x1 [ 2.685656] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0 [ 2.693293] tegra_profiler: auth: init [ 2.700879] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.711591] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 2.723350] scsi host0: tegra_ahci [ 2.727829] scsi host1: tegra_ahci [ 2.732049] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 2.741312] ata2: DUMMY [ 2.745185] spi-tegra114 3210000.spi: Static pin configuration used [ 2.752636] spi-tegra114 c260000.spi: Static pin configuration used [ 2.759999] spi-tegra114 3240000.spi: Static pin configuration used [ 2.767792] tun: Universal TUN/TAP device driver, 1.6 [ 2.773544] tun: (C) 1999-2004 Max Krasnyansky [ 2.780576] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.787117] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.793783] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.801444] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.807912] PPP generic driver version 2.4.2 [ 2.813053] PPP BSD Compression module registered [ 2.818455] PPP Deflate Compression module registered [ 2.824219] PPP MPPE Compression module registered [ 2.829690] NET: Registered protocol family 24 [ 2.834851] usbcore: registered new interface driver asix [ 2.840997] usbcore: registered new interface driver ax88179_178a [ 2.847767] usbcore: registered new interface driver cdc_ether [ 2.854256] usbcore: registered new interface driver smsc95xx [ 2.860613] usbcore: registered new interface driver net1080 [ 2.866852] usbcore: registered new interface driver cdc_subset [ 2.873336] usbcore: registered new interface driver zaurus [ 2.879530] usbcore: registered new interface driver cdc_ncm [ 2.886031] usbcore: registered new interface driver usb-storage [ 2.892761] tegra-usb-cd usb_cd: otg phy is not available yet [ 2.901166] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 3.040199] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.051707] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.059620] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.061005] ata1: SATA link down (SStatus 0 SControl 300) [ 3.073087] i2c /dev entries driver [ 3.078242] gspca_main: v2.14.0 registered [ 3.083257] usbcore: registered new interface driver gspca_zc3xx [ 3.090380] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.099607] FAN: coudln't get the regulator [ 3.105099] device-mapper: uevent: version 1.0.3 [ 3.110806] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 3.121386] sdhci: Secure Digital Host Controller Interface driver [ 3.128241] sdhci: Copyright(c) Pierre Ossman [ 3.133252] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.139800] sdhci-tegra 3460000.sdhci: Parent select= pll_p rate=408000000 [ 3.140494] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.140878] hidraw: raw HID events driver (C) Jiri Kosina [ 3.142531] usbcore: registered new interface driver usbhid [ 3.142533] usbhid: USB HID core driver [ 3.144339] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 3.144817] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 3.145033] ina3221x: probe of 0-0042 failed with error -121 [ 3.145375] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 3.145796] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 3.145971] ina3221x: probe of 0-0043 failed with error -121 [ 3.146319] nvadsp 2993000.adsp: in probe()... [ 3.147241] nvadsp 2993000.adsp: Registering AMC Error Interrupt [ 3.147296] nvadsp 2993000.adsp: AMC/ARAM initialized. [ 3.147449] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 3.147924] tegra_central_actmon d230000.actmon: in probe()... [ 3.148512] tegra_central_actmon d230000.actmon: initialization Completed for the device mc_all [ 3.148964] kfuse 3830000.kfuse: initialized [ 3.149274] Denver: backdoor interface is NOT available. [ 3.150366] coresight-tmc 8030000.etf: TMC initialized [ 3.150757] coresight-tpiu 8060000.tpiu: TPIU initialized [ 3.151265] coresight-funnel 9010000.funnel_bccplex: FUNNEL initialized [ 3.151727] coresight-funnel 8010000.funnel_major: FUNNEL initialized [ 3.152138] coresight-replicator 8040000.replicator: REPLICATOR initialized [ 3.152764] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [ 3.153373] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [ 3.153993] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [ 3.155638] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [ 3.155670] Module initialized successfully [ 3.159528] camchar: rtcpu character device driver loaded [ 3.161095] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.161268] register_ari_mca_banks: Registered MCA ROC:IOB [ 3.161341] register_ari_mca_banks: Registered MCA ROC:CCE [ 3.162059] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 3.162173] parse_throttle_dt_data: Num cap clks = 4 [ 3.162176] parse_throttle_dt_data: clk=mcpu type=1 [ 3.162179] parse_throttle_dt_data: clk=bcpu type=2 [ 3.162187] parse_throttle_dt_data: clk=gpu type=4 [ 3.162189] parse_throttle_dt_data: clk=emc type=3 [ 3.162694] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.162897] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 3.163377] Adding domain se-pd to PM domain host-pd [ 3.165301] tegra-se-nvhost 15810000.se: initialized [ 3.165857] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 3.166210] tegra-se-nvhost 15820000.se: initialized [ 3.166832] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 3.167174] tegra-se-nvhost 15830000.se: initialized [ 3.167688] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 3.167991] tegra-se-nvhost 15840000.se: initialized [ 3.168555] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 3.173613] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 3.175879] cpufreq: platform driver Initialization: pass [ 3.176041] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 3.176050] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 3.176078] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 3.176081] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 3.177192] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 3.178515] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.180803] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.180907] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.182952] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b 8c 9e 67 [ 3.183007] tachometer tegra-tachometer: Tachometer driver tegra-tachometer registered [ 3.183013] Tachometer driver initialized with pulse_per_rev: 1 and win_len: 1 [ 3.183375] libphy: dwc_phy: probed [ 3.186315] tegra210_adsp_audio_platform_probe: platform probe started [ 3.187374] tegra210-adsp adsp_audio: Default param-type to BYTE for mp3-dec1 [ 3.187799] tegra210-adsp adsp_audio: Default param-type to BYTE for spkprot [ 3.192556] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 3.192720] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 3.192907] tegra210-adsp adsp_audio: Default param-type to BYTE for src [ 3.193293] tegra210-adsp adsp_audio: Default param-type to BYTE for aac-dec1 [ 3.193724] tegra210-adsp adsp_audio: Default param-type to BYTE for aec [ 3.193731] tegra210-adsp adsp_audio: adma channel page address dt entry not found [ 3.193733] tegra210-adsp adsp_audio: using adma channel page 0 [ 3.203923] tegra210_adsp_audio_platform_probe probe successfull. [ 3.203924] OPE platform probe [ 3.203998] OPE platform probe successful [ 3.217834] tegra-snd-t186ref-mobile-rt565x sound: Failed to get HP Det GPIO, should be handled by codec [ 3.246221] gpio tegra-gpio wake18 for gpio=101(M:3) [ 3.246384] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.292109] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.292196] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.292277] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.292360] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.292444] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.292526] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.292608] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.292714] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.292815] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.292901] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.293013] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 3.293113] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 3.293196] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 3.293277] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 3.293359] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 3.293441] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 3.293545] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 3.293627] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 3.293706] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 3.293789] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 3.294984] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE1 <-> ADSP PCM1 mapping ok [ 3.295068] tegra-snd-t186ref-mobile-rt565x sound: ADSP-FE2 <-> ADSP PCM2 mapping ok [ 3.295090] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok [ 3.295112] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok [ 3.328228] input: tegra-snd-t186ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input2 [ 3.328930] tegra-snd-t186ref-mobile-rt565x sound: codec-dai "dit-hifi" registered [ 3.328932] tegra-snd-t186ref-mobile-rt565x sound: This is a dummy codec [ 3.329286] GACT probability NOT on [ 3.329294] Mirror/redirect action on [ 3.329303] u32 classifier [ 3.329304] Actions configured [ 3.329323] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 3.330002] Initializing XFRM netlink socket [ 3.330296] NET: Registered protocol family 10 [ 3.330998] NET: Registered protocol family 17 [ 3.331011] NET: Registered protocol family 15 [ 3.331016] 8021q: 802.1Q VLAN Support v1.8 [ 3.331580] Registered cp15_barrier emulation handler [ 3.337600] Registered setend emulation handler [ 3.338722] registered taskstats version 1 [ 3.339230] Adding domain ispa-pd to PM domain host-pd [ 3.341536] isp 15600000.isp: initialized [ 3.341910] Adding domain ve-pd to PM domain host-pd [ 3.344546] nvcsi 150c0000.nvcsi: initialized [ 3.346203] Wake76 for irq=199 [ 3.346204] Wake77 for irq=199 [ 3.346205] Wake78 for irq=199 [ 3.346206] Wake79 for irq=199 [ 3.346206] Wake80 for irq=199 [ 3.346207] Wake81 for irq=199 [ 3.346208] Wake82 for irq=199 [ 3.346377] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 3.346678] spi-tegra114 3210000.spi: Static pin configuration used [ 3.347227] spi-tegra114 c260000.spi: Static pin configuration used [ 3.347788] spi-tegra114 3240000.spi: Static pin configuration used [ 3.348206] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.349466] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 3.352656] tegra186-cam-rtcpu b000000.rtcpu: booting sce with Camera RTCPU FW [ 3.352671] tegra186-cam-rtcpu b000000.rtcpu: sce gets unhalted [ 3.353762] tegra-camera-rtcpu-character-device ivc-b000000.rtcpu:echo@0: probing /dev/camchar-echo [ 3.354510] tegra-camera-rtcpu-character-device ivc-b000000.rtcpu:dbg@7c00: probing /dev/camchar-dbg [ 3.354665] tegra186-cam-rtcpu b000000.rtcpu: enabling tracing [ 3.354700] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 3.354935] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=2 ivc=2 sha1=fb16914d17f56e81ad21e716791045b9ac83064a [ 3.355059] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 3.355065] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 3.355097] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 3.355099] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 3.355679] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 3.357721] Wake76 for irq=199 [ 3.357721] Wake77 for irq=199 [ 3.357722] Wake78 for irq=199 [ 3.357723] Wake79 for irq=199 [ 3.357724] Wake80 for irq=199 [ 3.357724] Wake81 for irq=199 [ 3.357725] Wake82 for irq=199 [ 3.357876] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 3.358051] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.359253] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 3.360213] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 3.360266] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 3.360336] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 3.360440] input: gpio-keys as /devices/gpio-keys/input/input3 [ 3.360671] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 3.360676] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 3.360706] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 3.360708] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 3.361246] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 3.363037] Wake76 for irq=199 [ 3.363038] Wake77 for irq=199 [ 3.363039] Wake78 for irq=199 [ 3.363040] Wake79 for irq=199 [ 3.363040] Wake80 for irq=199 [ 3.363041] Wake81 for irq=199 [ 3.363042] Wake82 for irq=199 [ 3.363192] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 3.363354] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.364515] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 3.395388] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:01:38 UTC (946688498) [ 3.409930] tegra-vi4 15700000.vi: initialized [ 3.411020] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 3.411025] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 3.411058] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 3.411061] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 3.411667] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 3.413912] Wake76 for irq=199 [ 3.413914] Wake77 for irq=199 [ 3.413914] Wake78 for irq=199 [ 3.413915] Wake79 for irq=199 [ 3.413916] Wake80 for irq=199 [ 3.413916] Wake81 for irq=199 [ 3.413917] Wake82 for irq=199 [ 3.414098] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 3.414335] tegra-usb-cd usb_cd: otg phy is not available yet [ 3.415634] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 3.425226] bpmp: mounted debugfs mirror [ 3.425570] [dram-timers] DRAM derating cdev registered. [ 3.428291] outp: disabling [ 3.428294] outn: disabling [ 3.428300] spmic-ldo0: disabling [ 3.428464] spmic-ldo1: disabling [ 3.428592] vddio-sdmmc1: disabling [ 3.428719] avdd-ts-hv: disabling [ 3.428848] en-vdd-sd: disabling [ 3.428849] vdd-usb0-5v: disabling [ 3.428850] vdd-usb1-5v: disabling [ 3.428852] vdd-3v3: disabling [ 3.428853] en-vdd-vcm-2v8: disabling [ 3.428855] vdd-sys-bl: disabling [ 3.434732] ALSA device list: [ 3.434735] #0: tegra-hda at 0x3518000 irq 391 [ 3.434736] #1: tegra-snd-t186ref-mobile-rt565x [ 4.531874] sdhci-tegra 3460000.sdhci: Parent select= pll_c4_out0 rate=196249804 [ 4.540231] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.549638] sdhci-tegra 3460000.sdhci: voltage switch failed in probe, err: -524 [ 4.588997] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.599316] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 4.599357] sdhci-tegra 3440000.sdhci: Parent select= pll_p rate=408000000 [ 4.599638] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.601557] sdhci-tegra 3440000.sdhci: voltage switch failed in probe, err: -524 [ 4.634103] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 4.634104] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 4.636990] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.637157] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 4.637195] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 4.637247] sdhci-tegra 3400000.sdhci: Parent select= pll_p rate=408000000 [ 4.637304] sdhci-tegra 3400000.sdhci: wakeup init done, cd_irq: 247 [ 4.637525] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 4.639354] sdhci-tegra 3400000.sdhci: voltage switch failed in probe, err: -524 [ 4.658945] mmc0: MAN_BKOPS_EN bit is not set [ 4.666022] mmc0: Skipping tuning since strobe enabled [ 4.673306] mmc0: periodic cache flush enabled [ 4.673311] mmc0: new HS400 MMC card at address 0001 [ 4.673555] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 4.673669] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 4.674660] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 4.681035] gpio tegra-gpio wake71 for gpio=125(P:6) [ 4.681061] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.681742] Freeing unused kernel memory: 1132K (ffffffc000f9c000 - ffffffc0010b7000) [ 4.681762] Freeing alternatives memory: 92K (ffffffc0010b7000 - ffffffc0010ce000) [ 4.713290] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 4.713290] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 4.794803] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 01:01:39 ] L4T initrd starts f[ 4.802642] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 rom here..... [ 01:01:39 ] L4T-INITRD Build DATE: Sat [ 4.813460] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg Jan 1 01:01:39 UTC 2000 [ 01:01:39 ] Root device found: mmcblk0p1 Roo[ 4.826409] Wake76 for irq=199 tdevice found: /dev/mmcblk0p1 [ 4.832878] Wake77 for irq=199 [ 4.838567] Wake78 for irq=199 [ 4.842120] Wake79 for irq=199 [ 4.845647] Wake80 for irq=199 [ 4.849153] Wake81 for irq=199 [ 4.852648] Wake82 for irq=199 [ 4.856403] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 4.863261] tegra-usb-cd usb_cd: otg phy is not available yet [ 4.873039] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 4.880496] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 4.886479] EXT4-fs (mmcblk0p1): 5 orphan inodes deleted [ 01:01:39 ] Rootfs mounted over mmcblk0[ 4.886481] EXT4-fs (mmcblk0p1): recovery complete p1 [ 4.893041] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) cp: not writing through dangling symlink 'et[ 4.913982] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff c/resolv.conf' [ 01:01:39 ] Switching from init[ 4.916745] mmc1 tuning done saved tap delay=62 rd to actual rootfs [ 4.916747] mmc1: hw tuning done ... [ 4.916753] mmc1: tuning_window[0]: 0xffffffff [ 4.916756] mmc1: tuning_window[1]: 0xfffffcff [ 4.916760] mmc1: tuning_window[2]: 0xffcfffff [ 4.916763] mmc1: tuning_window[3]: 0x7fffffff [ 4.916767] mmc1: tuning_window[4]: 0x0 [ 4.916770] mmc1: tuning_window[5]: 0x0 [ 4.916792] mmc1: tuning_window[6]: 0x0 [ 4.916795] mmc1: tuning_window[7]: 0x0 [ 4.916797] sdhci: Tap value: 62 | Trim value: 5 [ 4.916800] sdhci: SDMMC_VENDOR_INTR_STATUS[0x108]: 0x40000 [ 4.921683] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.921715] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.964057] systemd[1]: System time before build time, advancing clock. [ 4.981955] random: systemd urandom read with 113 bits of entropy available [ 5.014908] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 5.022112] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 5.022222] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.022520] systemd[1]: Detected architecture arm64. Welcome to Ubuntu 16.04 LTS! [ 5.056359] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 5.075506] systemd[1]: Set hostname to . [ 5.188141] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.201129] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 5.213016] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.225055] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.241048] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 5.253089] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 5.265081] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.281023] systemd[1]: Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems (Pre). [ 5.297011] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.313012] systemd[1]: Reached target User and Group Name Lookups. [ OK ] Reached target User and Group Name Lookups. [ 5.329044] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.345009] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.357050] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.373012] systemd[1]: Reached target Encrypted Volumes. [[ 5.379185] random: nonblocking pool is initialized  OK ] Reached target Encrypted Volumes. [ 5.393063] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 5.413056] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.441266] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 5.459927] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 5.481921] systemd[1]: Started Braille Device Support. [ OK ] Started Braille Device Support. [ 5.498303] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 5.512823] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.521897] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 5.528055] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/de[ 5.536768] Wake76 for irq=199 v/log). [ 5.543451] Wake77 for irq=199 [ 5.547233] Wake78 for irq=199 [ 5.550927] Wake79 for irq=199 [ 5.551425] systemd[1]: Starting Journal Service... [ 5.560345] Wake80 for irq=199 [ 5.560348] Wake81 for irq=199 [ 5.560349] Wake82 for irq=199 [ 5.560633] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 5.560913] tegra-usb-cd usb_cd: otg phy is not available yet [ 5.564903] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 5.568088] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 5.568094] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 5.568127] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 5.568130] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 5.584702] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg Starting Journal Service... [ 5.641237] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.670406] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 5.685225] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Load Kernel Modules. Mounting Configuration File System... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load/Save Random Seed. [ 5.856441] systemd-journald[229]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. Starting lvm2.service... [ OK ] Started lvm2.service. [ OK ] Reached target Local File Systems. Starting Tell Plymouth To Write Out Runtime Data... Starting LSB: AppArmor initialization... Starting Create Volatile Files and Directories... [ 6.029275] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration Starting Clean up any mess left by 0dns-up... [ 6.040010] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 6.053551] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes Starting Set console keymap... [ 6.064675] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ OK ] Started udev Coldplug all Devices. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Create Volatile Files and Directories. [FAILED] Failed to start Set console keymap. See 'systemctl status console-setup.service' for details. [ OK ] Found device /dev/ttyS0. [ OK ] Started LSB: AppArmor initial[ 6.212604] tegra_net_perf_init: cannot get wifi sclk ization. [ 6.224720] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ OK ] Started Clean up any mess left by 0dns-up. [ 6.239648] Wake76 for irq=199 [ 6.243633] Wake77 for irq=199 [ 6.247513] Wake78 for irq=199 [ 6.247514] Wake79 for irq=199 [ 6.247515] Wake80 for irq=199 [ 6.247516] Wake81 for irq=199 [ 6.247516] Wake82 for irq=199 [ 6.249563] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 6.250960] tegra-usb-cd usb_cd: otg phy is not available yet [ 6.261460] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 6.261825] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 6.261832] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 6.261868] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 6.261870] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 6.267322] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Raise network interfaces... [ OK ] Reached target Sound Card. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Network Time Synchronization. [ 6.460157] Wake76 for irq=199 [ 6.463567] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 [ 6.463968] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc1eabe1a70 [ 6.464551] tegra_sysfs_register [ 6.464659] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 62 [ 6.494618] Wake77 for irq=199 [ 6.498488] Wake78 for irq=199 [ 6.502323] Wake79 for irq=199 [ 6.506130] Wake80 for irq=199 [ 6.509931] Wake81 for irq=199 [ 6.513688] Wake82 for irq=199 [ 6.517806] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 6.520997] tegra-pcie 10003000.pcie-controller: link 0 down, retrying Starting Load/Save RF Ki[ 6.532271] tegra-usb-cd usb_cd: otg phy is not available yet ll Switch Status... [ 6.542195] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ OK ] Reached target S[ 6.550265] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff ystem Time Synchronized. [ 6.564463] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 6.575919] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 6.583834] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 6.584555] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on CUPS Scheduler. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets. Starting Socket activation for snappy d[ 6.671037] Wake76 for irq=199 aemon. [ 6.677919] Wake77 for irq=199 [ 6.681873] Wake78 for irq=199 [ 6.685841] Wake79 for irq=199 [ 6.689680] Wake80 for irq=199 [ 6.693484] Wake81 for irq=199 [ 6.697260] Wake82 for irq=199 [ 6.701289] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 6.708451] tegra-usb-cd usb_cd: otg phy is not available yet [ OK ] Started CUPS Schedul[ 6.715691] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet er. [ 6.726129] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 6.737108] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ OK ] Reached target Paths. [ 6.747650] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 6.757658] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 6.765706] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ OK ] Started Daily apt activities. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started Raise network interfaces. [ OK ] Listening on Socket activation for snappy daemon. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting NVIDIA specific script... [ OK ] Started D-Bus System Message Bus. Starting Network Manager... [ 6.935002] tegra-pcie 10003000.pcie-controller: link 0 down, retrying Starting Save/Restore Sound Card State... Starting Modem Manager... Starting LSB: Speech Dispatcher... Starting Permit User Sessions... Starting Restore /etc/resolv.conf i...re the ppp link was shut down... Starting Accounts Service... [ 6.990967] gk20a 17000000.gp10b: railgate is disabled. Starting NVIDIA specific first-boot script... Starting System Logging Service... [ OK ] Started CUPS Scheduler. [ OK ] Started GPS (Global Positioning System) Daemon. [ OK ] Started crash report submission daemon. [ OK ] Started Run anacron jobs. Starting Login Service... Starting Avahi mDNS/DNS-SD Stack... Starting LSB: automatic crash report generation... Starting pulseaudio restart service... Starting oFono Mobile telephony stack... [ OK ] Started Regular background program processing daemon. [ OK ] Started System Logging Service. [ OK ] Started NVIDIA specific script. [ 7.158647] Bluetooth: Core ver 2.21 [ 7.163307] NET: Registered protocol family 31 [ OK ] Started Permit User Sessions. [ 7.177430] Bluetooth: HCI device and connection manager initialized [ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down. [ 7.193930] Bluetooth: HCI socket layer initialized [ 7.201446] Bluetooth: L2CAP socket layer initialized [ OK ] Started pulseaudio restart service. [ 7.219913] Bluetooth: SCO socket layer initialized [ OK ] Started LSB: Speech Dispatcher. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started oFono Mobile telephony stack. [ OK ] Started LSB: automatic crash report generation. [ OK ] Started Network Manager. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Login Service. Starting Network Manager Script Dispatcher Service... [ 7.357027] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ OK ] Reached target Network. [ 7.368242] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring Starting OpenBSD Secure Shell server... Starting Network Manager Wait Online... [ OK ] Started Make remote CUPS printers available locally. Starting Authenticate and Authorize Users to Run Privileged Tasks... Starting Light Display Manager... [ OK ] Started nvpmodel service. [ 7.440987] CPU1: shutdown [ 7.444468] psci: CPU1 killed. [ 7.449812] CPU2: shutdown [ 7.453294] psci: CPU2 killed. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks. [ OK ] Started Accounts Service. [ OK ] Started Modem Manager. Starting Hostname Service... [ OK ] Stopped Light Display Manager. [ OK ] Started Hostname Service. Starting Light Display Manager... [ 7.578561] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ OK ] Started Light Display Manager. [ OK ] Started NVIDIA specific first-boot script. [ 7.782292] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 7.794665] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39] [ 7.836828] pad_id 28: PMC_IMPL_E_33V_PWR_0 = [0x39][ 7.862489] tegradc 15210000.nvdisplay: blank - powerdown [ 7.869548] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 7.940668] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 62 [ 8.046949] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.052351] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.057654] Enabling wake69 [ OK ] Created slice User Slice of nvidia. [ 8.077616] tegra_sysfs_on Starting User Manager for UID 1001... [ OK ] Started Session c1 of user nvidia. [ 8.140481] cfg80211: World regulatory domain updated: [ 8.145659] cfg80211: DFS Master region: unset [ 8.150053] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.159816] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.167827] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.175852] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.183863] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.193352] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.196980] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 8.209357] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.217463] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.225464] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.233830] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.302239] gpio tegra-gpio wake18 for gpio=101(M:3) [ 8.308659] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Starting RealtimeKit Scheduling Policy Service... [ OK ] Started RealtimeKit Scheduling Policy Service. Starting WPA supplicant... [ OK ] Started WPA supplicant. [ 8.424517] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered [ 8.436677] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.492279] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.531918] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.574509] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.584484] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.596096] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.611000] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 8.619544] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 8.626082] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 8.633425] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.633648] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 8.635893] Wake76 for irq=199 [ 8.635895] Wake77 for irq=199 [ 8.635896] Wake78 for irq=199 [ 8.635896] Wake79 for irq=199 [ 8.635897] Wake80 for irq=199 [ 8.635898] Wake81 for irq=199 [ 8.635899] Wake82 for irq=199 [ 8.636164] xhci-tegra 3530000.xhci: can't get usb3-0 phy (-517) [ 8.636492] tegra-usb-cd usb_cd: otg phy is not available yet [ 8.638839] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 8.639323] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 8.639329] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 8.639366] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2ec098 [ 8.639368] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 8.640017] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 8.728616] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.743103] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz [ 8.784652] pll_a_out0 = 22579200 Hz, aud_mclk = 11289600 Hz, codec rate = 44100 Hz Starting Bluetooth service... [ OK ] Started User Manager for UID 1001. [ OK ] Started Bluetooth service. [ 8.873930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.879305] Bluetooth: BNEP socket layer initialized [ 9.808226] fuse init (API version 7.23) Starting Daemon for power management... [ OK ] Started Daemon for power management. Starting Manage, Install and Generate Color Profiles... [ OK ] Started Manage, Install and Generate Color Profiles. Starting Locale Service... [ OK ] Started Locale Service. Starting Disk Manager... [ OK ] Started Disk Manager. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. [ OK ] Started Argus daemon. Starting /etc/rc.local Compatibility... [ OK ] Started nvcamera daemon. [ OK ] Started /etc/rc.local Compatibility. Starting Hold until boot process finishes up... [ OK ] Started Hold until boot process finishes up. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Ubuntu 16.04 LTS tegra-ubuntu ttyS0 tegra-ubuntu login: nvidia (automatic login) Last login: Tue Dec 5 05:51:07 UTC 2017 on tty1 Welcome to Ubuntu 16.04 LTS (GNU/Linux 4.4.15-tegra aarch64) * Documentation: https://help.ubuntu.com/ 329 packages can be updated. 4 updates are security updates. nvidia@tegra-ubuntu:~$