[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (lzy@lzy) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #19 SMP PREEMPT Wed Aug 3 10:42:11 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 6c4800000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b3000 [ 0.000000] Found lut_mem: 00002008@a06b0000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000fbc00000 [ 0.000000] On node 0 totalpages: 7273981 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521213 pages, LIFO batch:31 [ 0.000000] Normal zone: 105512 pages used for memmap [ 0.000000] Normal zone: 6752768 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 7160277 [ 0.000000] Kernel command line: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b3000 lut_mem=0x2008@0xa06b0000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30020(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Memory: 27788376K/29095924K available (15358K kernel code, 2958K rwdata, 6788K rodata, 8640K init, 610K bss, 553884K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a183808 ( 2959 KB) [ 0.000000] .bss : 0xffffff800a183808 - 0xffffff800a21c0f4 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf1bc28000 ( 444 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc6f0a00000 ( 28426 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000006] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009148] Console: colour dummy device 80x25 [ 0.012699] console [tty0] enabled [ 0.015864] bootconsole [tegra_comb_uart0] disabled [ 0.021108] kmemleak: Kernel memory leak detector disabled [ 0.021147] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.021184] pid_max: default: 32768 minimum: 301 [ 0.022255] Security Framework initialized [ 0.022800] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.022827] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.024898] ftrace: allocating 47112 entries in 185 pages [ 0.421041] sched-energy: Sched-energy-costs installed from DT [ 0.421150] ASID allocator initialised with 65536 entries [ 0.459740] tegra-id: chipid=21917. [ 0.459766] tegra-id: opt_subrevision=1. [ 0.459803] Tegra Revision: A02p SKU: 0x99 CPU Process: 0 SoC Process: 0 [ 0.459860] DTS File Name: /home/lzy/AGX/JetPack_4.6.2/public_sources/Linux_for_Tegra/source/public/kernel_src-nvidia/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/galen-industrial/kernel-dts/tegra194-p2888-0008-p2822-0000.dts [ 0.459923] DTB Build time: Sep 9 2022 18:06:34 [ 0.507397] CPU1: Booted secondary processor [4e0f0040] [ 0.539506] CPU2: Booted secondary processor [4e0f0040] [ 0.571536] CPU3: Booted secondary processor [4e0f0040] [ 0.603867] CPU4: Booted secondary processor [4e0f0040] [ 0.635924] CPU5: Booted secondary processor [4e0f0040] [ 0.668511] CPU6: Booted secondary processor [4e0f0040] [ 0.700331] CPU7: Booted secondary processor [4e0f0040] [ 0.700609] Brought up 8 CPUs [ 0.700875] SMP: Total of 8 processors activated. [ 0.700924] CPU features: detected feature: Privileged Access Never [ 0.700951] CPU features: detected feature: LSE atomic instructions [ 0.701002] CPU features: detected feature: User Access Override [ 0.701033] CPU features: detected feature: 32-bit EL0 Support [ 0.702862] CPU: All CPU(s) started at EL2 [ 0.702942] alternatives: patching kernel code [ 0.711786] devtmpfs: initialized [ 0.765573] Initilizing CustomIPI irq domain [ 0.765809] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.765852] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.776882] pinctrl core: initialized pinctrl subsystem [ 0.777144] OS set in device tree is not L4T. [ 0.777434] regulator-dummy: no parameters [ 0.777712] Initializing plugin-manager [ 0.777795] Plugin module not found [ 0.777842] Plugin-manager status disabled [ 0.779221] NET: Registered protocol family 16 [ 0.780607] pstore: using zlib compression [ 0.781366] console [pstore-1] enabled [ 0.781393] pstore: Registered ramoops as persistent store backend [ 0.781422] ramoops: attached 0x200000@0xffe00000, ecc: 0/0 [ 0.799934] cpuidle: using governor menu [ 0.801202] bpmp: waiting for handshake [ 0.801272] bpmp: handshake completed [ 0.801325] bpmp: synchronizing channels [ 0.801350] bpmp: channels synchronized [ 0.801370] bpmp: mail init ok [ 0.804404] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.804636] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.804658] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.804678] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.804697] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.804716] t19x-arm-smmu 12000000.iommu: nested translation [ 0.804737] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.804764] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.804788] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.804809] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.804853] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.809231] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000) [ 0.809290] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.812274] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.814449] tegra_aon_clk_init: ok [ 0.814483] Registering BPMP clocks... [ 0.814604] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.815615] Serial: AMBA PL011 UART driver [ 0.815779] tegra_powergate_init: DONE [ 0.815876] DTS File Name: /home/lzy/AGX/JetPack_4.6.2/public_sources/Linux_for_Tegra/source/public/kernel_src-nvidia/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/galen-industrial/kernel-dts/tegra194-p2888-0008-p2822-0000.dts [ 0.815928] DTB Build time: Sep 9 2022 18:06:34 [ 0.819946] Tegra reboot handler registered. [ 0.828200] iommu: Adding device 14180000.pcie to group 0 [ 0.828996] iommu: Adding device 14100000.pcie to group 1 [ 0.829754] iommu: Adding device 14140000.pcie to group 2 [ 0.830449] iommu: Adding device 14160000.pcie to group 3 [ 0.831216] iommu: Adding device 141a0000.pcie to group 4 [ 0.832788] iommu: Adding device 2490000.ether_qos to group 5 [ 0.833390] iommu: Adding device 3100000.serial to group 6 [ 0.833936] iommu: Adding device 3110000.serial to group 7 [ 0.834407] iommu: Adding device 3140000.serial to group 8 [ 0.835007] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.835360] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.835410] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.835434] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.835458] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.835524] tegra-pmc: PMC Prod config success [ 0.835808] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.835863] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.836254] iommu: Adding device 3460000.sdhci to group 9 [ 0.836852] iommu: Adding device 3400000.sdhci to group 10 [ 0.837471] iommu: Adding device 2450000.ufshci to group 11 [ 0.838246] iommu: Adding device 3210000.spi to group 12 [ 0.838693] iommu: Adding device c260000.spi to group 13 [ 0.839098] iommu: Adding device 3270000.spi to group 14 [ 0.839503] iommu: Adding device 3300000.spi to group 15 [ 0.840459] iommu: Adding device 3160000.i2c to group 16 [ 0.840889] iommu: Adding device c240000.i2c to group 17 [ 0.841309] iommu: Adding device 3180000.i2c to group 18 [ 0.841733] iommu: Adding device 3190000.i2c to group 19 [ 0.842304] iommu: Adding device 31b0000.i2c to group 20 [ 0.842719] iommu: Adding device 31c0000.i2c to group 21 [ 0.843133] iommu: Adding device c250000.i2c to group 22 [ 0.843619] iommu: Adding device 31e0000.i2c to group 23 [ 0.844620] iommu: Adding device sound to group 24 [ 0.845229] iommu: Adding device 3510000.hda to group 25 [ 0.845664] iommu: Adding device b040000.sce to group 26 [ 0.846278] iommu: Adding device bc00000.rtcpu to group 27 [ 0.848303] iommu: Adding device 13e10000.host1x to group 28 [ 0.848762] iommu: Adding device 13e10000.host1x:ctx0 to group 29 [ 0.849189] iommu: Adding device 13e10000.host1x:ctx1 to group 30 [ 0.849753] iommu: Adding device 13e10000.host1x:ctx2 to group 31 [ 0.850152] iommu: Adding device 13e10000.host1x:ctx3 to group 32 [ 0.850560] iommu: Adding device 13e10000.host1x:ctx4 to group 33 [ 0.850949] iommu: Adding device 13e10000.host1x:ctx5 to group 34 [ 0.851387] iommu: Adding device 13e10000.host1x:ctx6 to group 35 [ 0.851777] iommu: Adding device 13e10000.host1x:ctx7 to group 36 [ 0.852339] iommu: Adding device 15340000.vic to group 37 [ 0.852747] iommu: Adding device 15380000.nvjpg to group 38 [ 0.853132] iommu: Adding device 15500000.tsec to group 39 [ 0.853462] iommu: Adding device 15100000.tsecb to group 40 [ 0.853797] iommu: Adding device 15480000.nvdec to group 41 [ 0.854142] iommu: Adding device 15140000.nvdec1 to group 42 [ 0.854431] iommu: Adding device 154c0000.nvenc to group 43 [ 0.854701] iommu: Adding device 15a80000.nvenc1 to group 44 [ 0.855103] iommu: Adding device 15880000.nvdla0 to group 45 [ 0.855935] iommu: Adding device 158c0000.nvdla1 to group 46 [ 0.856512] iommu: Adding device 15200000.nvdisplay to group 47 [ 0.856721] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b3000(800000) [ 0.856752] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b0000(3000) [ 0.860708] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.860852] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.861446] iommu: Adding device 15210000.nvdisplay to group 48 [ 0.861519] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.861932] iommu: Adding device 15220000.nvdisplay to group 49 [ 0.861999] t19x-arm-smmu: Adding 15220000.nvdisplay to ISO SMMU client [ 0.864396] iommu: Adding device 15c10000.vi to group 50 [ 0.864640] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.865014] iommu: Adding device 14800000.isp to group 51 [ 0.865988] iommu: Adding device 16000000.pva0 to group 52 [ 0.866533] iommu: Adding device 16800000.pva1 to group 53 [ 0.867002] iommu: Adding device 15810000.se to group 54 [ 0.867489] iommu: Adding device 15820000.se to group 55 [ 0.867780] iommu: Adding device 15830000.se to group 56 [ 0.868114] iommu: Adding device 15840000.se to group 57 [ 0.868446] iommu: Adding device c1a0000.aon to group 58 [ 0.870569] iommu: Adding device d000000.bpmp to group 59 [ 0.870912] bpmp: ping status is 0 [ 0.871089] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.874252] bpmp d000000.bpmp: probe ok [ 0.876500] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.876992] iommu: Adding device smmu_test to group 60 [ 0.878091] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.878135] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.878177] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c30000 [ 0.878215] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c40000 [ 0.878253] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2c50000 [ 0.878291] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b80000 [ 0.878328] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2b90000 [ 0.878364] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2ba0000 [ 0.878401] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x2bb0000 [ 0.878437] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1700000 [ 0.878486] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1710000 [ 0.878533] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1720000 [ 0.878569] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1730000 [ 0.878605] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1740000 [ 0.878641] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1750000 [ 0.878680] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1760000 [ 0.878745] mc: mapped MMIO address: 0xffffff800b1d0000 -> 0x1770000 [ 0.878843] mc-err: mcerr ops are set to t19x [ 0.884989] iommu: Adding device 2600000.dma to group 61 [ 0.889581] gpio gpiochip0: gpio-line-names specifies 210 line names but there are 224 lines on the chip [ 0.890702] GPIO line 339 (wifi-enable) hogged as output/high [ 0.891046] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.897837] gpio gpiochip1: gpio-line-names specifies 30 line names but there are 40 lines on the chip [ 0.897958] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.898251] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.900420] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.900449] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.900472] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.901286] iommu: Adding device 3550000.xudc to group 62 [ 0.901966] iommu: Adding device 3610000.xhci to group 63 [ 0.904063] arm64_ras arm64_ras: probed [ 0.904503] ras_fhi_enable: FHI 487 enabled on CPU0 [ 0.904551] ras_fhi_enable: FHI 488 enabled on CPU1 [ 0.904628] ras_fhi_enable: FHI 489 enabled on CPU2 [ 0.904715] ras_fhi_enable: FHI 490 enabled on CPU3 [ 0.904778] ras_fhi_enable: FHI 491 enabled on CPU4 [ 0.904878] ras_fhi_enable: FHI 492 enabled on CPU5 [ 0.904950] ras_fhi_enable: FHI 493 enabled on CPU6 [ 0.905058] ras_fhi_enable: FHI 494 enabled on CPU7 [ 0.905290] carmel_ras_enable: RAS enabled on cpu0 [ 0.905480] carmel_ras_enable: RAS enabled on cpu1 [ 0.905680] carmel_ras_enable: RAS enabled on cpu2 [ 0.905873] carmel_ras_enable: RAS enabled on cpu3 [ 0.906060] carmel_ras_enable: RAS enabled on cpu4 [ 0.906254] carmel_ras_enable: RAS enabled on cpu5 [ 0.906491] carmel_ras_enable: RAS enabled on cpu6 [ 0.906681] carmel_ras_enable: RAS enabled on cpu7 [ 0.906804] carmel_ras carmel_ras: probed [ 0.908230] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 496, noc_nonsecure_irq = 495> [ 0.908780] tegra-cbb c600000.aon-noc: noc_secure_irq = 498, noc_nonsecure_irq = 497> [ 0.909804] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 500, noc_nonsecure_irq = 499> [ 0.910774] tegra-cbb be00000.rce-noc: noc_secure_irq = 502, noc_nonsecure_irq = 501> [ 0.911668] tegra-cbb b600000.sce-noc: noc_secure_irq = 504, noc_nonsecure_irq = 503> [ 0.912037] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.915110] vdd-3v3-cvb: 3300 mV [ 0.915434] vdd-1v8-cvb: 1800 mV [ 0.915819] vdd-1v8-sd: 1800 mV [ 0.916155] vdd-epb-1v0: 1000 mV [ 0.916445] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.916700] vdd-sdmmc1-sw: 3300 mV [ 0.917076] avdd-cam-2v8: 2800 mV [ 0.917398] vdd-sata-1v5: 1500 mV [ 0.917697] vdd-1v8-slt: 1800 mV [ 0.918008] vdd-3v3-slt: 3300 mV [ 0.918316] vdd-fan: 5000 mV [ 0.918723] vdd-hdmi-5v0: 5000 mV [ 0.919137] vdd_sys_en: 1200 mV [ 0.919507] vdd-5v-sata: 5000 mV [ 0.920012] vdd-3v3-pcie: 3300 mV [ 0.920462] vdd-12v-pcie: 1200 mV [ 0.920832] vdd-ac-bat: 5000 mV [ 0.921013] vdd-5v-sata: supplied by vdd-ac-bat [ 0.953392] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.958031] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.958366] SCSI subsystem initialized [ 0.958576] libata version 3.00 loaded. [ 0.958753] usbcore: registered new interface driver usbfs [ 0.958810] usbcore: registered new interface driver hub [ 0.958892] usbcore: registered new device driver usb [ 0.970484] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.973497] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.981030] vdd-1v0: at 1000 mV [ 0.985118] vdd-1v8-hs: at 1800 mV [ 0.989100] vdd-1v8-ls: at 1800 mV [ 0.993102] vdd-1v8-ao: at 1800 mV [ 0.997150] vddio-ddr-1v1: at 1100 mV [ 1.000963] vdd-rtc: at 800 mV [ 1.002244] spmic-ldo1: at 2375 mV [ 1.008956] vdd-ao-3v3: at 3300 mV [ 1.017017] vddio-emmc-3v3: at 3300 mV [ 1.018362] spmic-ldo4: at 1587 mV [ 1.025051] vdd-usb-3v3: at 3300 mV [ 1.033085] vddio-sdmmc1-3v3: at 3300 mV [ 1.037102] vdd-csi-1v2: at 1200 mV [ 1.038617] spmic-ldo8: at 1800 mV [ 1.043571] GPIO line 246 (gpio_default) hogged as output/high [ 1.045004] GPIO line 247 (gpio_default) hogged as output/high [ 1.045312] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 1.045598] max77620 4-003c: max77620 probe successful [ 1.046354] media: Linux media interface: v0.10 [ 1.046463] Linux video capture interface: v2.00 [ 1.048023] pps_core: LinuxPPS API ver. 1 registered [ 1.048046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.048090] PTP clock support registered [ 1.048389] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.048683] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.048752] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.051653] trusty trusty: trusty version: Built: 02:25:37 Apr 17 2022 [ 1.051732] trusty trusty: selected api version: 3 (requested 3) [ 1.052748] Advanced Linux Sound Architecture Driver Initialized. [ 1.053301] Bluetooth: Core ver 2.22 [ 1.053389] NET: Registered protocol family 31 [ 1.053409] Bluetooth: HCI device and connection manager initialized [ 1.053438] Bluetooth: HCI socket layer initialized [ 1.053462] Bluetooth: L2CAP socket layer initialized [ 1.053501] Bluetooth: SCO socket layer initialized [ 1.056355] camchar: rtcpu character device driver loaded [ 1.057613] clocksource: Switched to clocksource arch_sys_counter [ 1.099328] VFS: Disk quotas dquot_6.6.0 [ 1.099446] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.099768] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.101357] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.101445] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.101744] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.101769] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.101799] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.101825] nvmap_page_pool_init: Total RAM pages: 7135510 [ 1.101845] nvmap_page_pool_init: nvmap page pool size: 891938 pages (3484 MB) [ 1.102109] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.102603] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.103601] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.116418] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.116732] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.117032] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.117230] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.117436] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.117551] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tboard_tegra [ 1.117707] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tdiode_tegra [ 1.118883] la/ptsa driver initialized. [ 1.119201] NET: Registered protocol family 2 [ 1.119321] IP idents hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.126561] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.127868] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.128526] TCP: Hash tables configured (established 262144 bind 65536) [ 1.128600] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 1.129071] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 1.129879] NET: Registered protocol family 1 [ 1.130493] RPC: Registered named UNIX socket transport module. [ 1.130535] RPC: Registered udp transport module. [ 1.130554] RPC: Registered tcp transport module. [ 1.130571] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.130597] PCI: CLS 0 bytes, default 64 [ 1.130890] Trying to unpack rootfs image as initramfs... [ 1.346572] Freeing initrd memory: 7068K [ 1.361353] random: fast init done [ 1.365842] host1x 13e10000.host1x: initialized [ 1.367947] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.372420] audit: initializing netlink subsys (disabled) [ 1.372488] audit: type=2000 audit(0.980:1): initialized [ 1.373137] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 1.380878] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.382112] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.382765] 9p: Installing v9fs 9p2000 file system support [ 1.387934] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.388167] io scheduler noop registered [ 1.388416] io scheduler cfq registered (default) [ 1.391877] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.427636] iommu: Adding device 2993000.adsp to group 64 [ 1.539620] iommu: Adding device aconnect@2a41000:adsp_audio to group 65 [ 1.540660] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.553433] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.553909] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.554442] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.554880] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.558246] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.558456] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.558483] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 1.561758] tsec 15500000.tsec: initialized [ 1.563403] tsec 15100000.tsecb: initialized [ 1.567829] nvdec 15480000.nvdec: initialized [ 1.570673] nvdec 15140000.nvdec1: initialized [ 1.577347] falcon 15340000.vic: initialized [ 1.579155] falcon 15380000.nvjpg: initialized [ 1.581081] falcon 154c0000.nvenc: initialized [ 1.583164] falcon 15a80000.nvenc1: initialized [ 1.585684] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.587308] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.588970] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.590568] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.592128] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.593745] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.595319] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.596941] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.600758] t194-nvcsi 15a00000.nvcsi: initialized [ 1.606473] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.606845] scare-pigeon 14b00000.isp-thi: initialized [ 1.616621] pva 16000000.pva0: initialized [ 1.647613] pva 16800000.pva1: initialized [ 1.678246] nvdla 15880000.nvdla0: initialized [ 1.708131] nvdla 158c0000.nvdla1: initialized [ 1.709748] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.709779] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.709840] tegradccommon 15200000.dc_common: dma mapping done [ 1.710066] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=89 [ 1.710102] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.710424] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.710477] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.710781] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.710809] tegra_cec 3960000.tegra_cec: probed [ 1.711664] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor2 [ 1.711752] generic_infoframe_type: 0x87 [ 1.711892] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.711962] tegradc 15200000.nvdisplay: Display dc.ffffff800bd90000 registered with id=0 [ 1.715822] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.715857] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 1066500000 Hz [ 1.715880] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 358400000 Hz [ 1.716165] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.716190] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.717821] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.720429] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.720482] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.724178] tegradc 15200000.nvdisplay: probed [ 1.724999] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.725902] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.725933] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.726380] kfuse 3830000.kfuse: initialized [ 1.734972] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.738069] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 53, base_baud = 0) is a TEGRA_UART [ 1.739532] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 54, base_baud = 0) is a TEGRA_UART [ 1.740555] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 55, base_baud = 0) is a TEGRA_UART [ 2.721702] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.721709] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.291547] console [ttyTCU0] enabled [ 4.291924] [drm] Initialized [ 4.292159] Console: switching to colour frame buffer device 240x67 [ 4.304306] tegradc 15200000.nvdisplay: fb registered [ 4.304384] brd: module loaded [ 4.313179] gpio tegra-gpio wake71 for gpio=98(M:2) [ 4.318458] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.318813] loop: module loaded [ 4.318895] tegra_profiler: version: 1.145, samples/io: 49/28 [ 4.319055] tegra_profiler: auth: init [ 4.319490] nct1008_nct72 4-004c: starting parse dt [ 4.319593] nct1008_nct72 4-004c: !!!Found deprecated property!!! [ 4.319600] nct1008_nct72 4-004c: success parsing dt [ 4.319691] nct1008_nct72 4-004c: success in enabling tmp451 VDD rail [ 4.319912] THERMAL EST: found 3 subdevs [ 4.319917] THERMAL EST num_resources: 0 [ 4.319922] [THERMAL EST subdev 0] [ 4.319927] [THERMAL EST subdev 1] [ 4.319930] [THERMAL EST subdev 2] [ 4.319941] THERMAL EST: Found 2 profiles, default profile is quiet [ 4.320213] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 4.320216] THERMAL EST: thz register success. [ 4.320416] THERMAL EST: end of probe, return err: 0 [ 4.321350] ufs_tegra 2450000.ufshci: freq-table-hz property not specified [ 4.321358] ufs_tegra 2450000.ufshci: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 4.326798] ufs_tegra 2450000.ufshci: wakeup init done, cdirq 469 [ 4.326810] gpio tegra-gpio-aon wake25 for gpio=32(EE:0) [ 4.362785] nct1008_nct72 4-004c: LOC shutdown limit 125 [ 4.373112] nct1008_nct72 4-004c: EXT shutdown limit 117 [ 4.441546] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.441563] nct1008_nct72 4-004c: initial LOC temp: 46000 [ 4.453079] nct1008_nct72 4-004c: initial EXT temp: 58000 [ 4.459187] nct1008_nct72 4-004c: hi_b:-10, lo_b:128 [ 4.467401] nct1008_nct72 4-004c: nct1008_probe: initialized [ 4.475114] sd: No Scsi addr parsed to reserve index [ 4.475361] hisi_sas: driver version v1.6 [ 4.475958] Parent Clock set for DC plld3 [ 4.492870] qspi_mtd spi6.0: s25fs512s SSG 8 0 1000 4000000 [ 4.492999] qspi_mtd spi6.0: s25fs512s (65536 Kbytes) [ 4.493117] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00040000 (256KiB) .numeraseregions = 0 [ 4.505069] 1 ofpart partitions found on MTD device spi6.0 [ 4.509932] Creating 1 MTD partitions on "spi6.0": [ 4.514916] 0x000000000000-0x000004000000 : "Whole_flash0" [ 4.525457] qspi_mtd spi7.0: mx75u25690f (32768 Kbytes) [ 4.525581] qspi_mtd spi7.0: mtd .name = spi7.0, .size = 0x2000000 (32MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 4.532463] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 4.533041] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 4.533051] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 4.558577] extcon-disp-state external-connection:disp-state: cable 48 state 1 [ 4.558581] Extcon AUX2(HDMI) enable [ 4.573756] 1 ofpart partitions found on MTD device spi7.0 [ 4.578033] Creating 1 MTD partitions on "spi7.0": [ 4.583072] 0x000000000000-0x000002000000 : "Secure_ROM" [ 4.591056] libphy: Fixed MDIO Bus: probed [ 4.593393] tun: Universal TUN/TAP device driver, 1.6 [ 4.597786] tun: (C) 1999-2004 Max Krasnyansky [ 4.605121] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.610024] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.616186] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.623051] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.628434] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.636487] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.642435] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 4.650089] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.667922] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 4.668620] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 55 b7 8d [ 4.669633] Using phyrst_lpmode = 1 from DT [ 4.673511] libphy: dwc_phy: probed [ 4.677309] lzyong..read phyaddr=0, phyid=01410dd1 [ 4.683757] PPP generic driver version 2.4.2 [ 4.686781] PPP BSD Compression module registered [ 4.690961] PPP Deflate Compression module registered [ 4.696055] PPP MPPE Compression module registered [ 4.696060] NET: Registered protocol family 24 [ 4.696121] usbcore: registered new interface driver r8152 [ 4.696163] tegradc 15200000.nvdisplay: blank - powerdown [ 4.696166] usbcore: registered new interface driver asix [ 4.696197] usbcore: registered new interface driver ax88179_178a [ 4.696220] usbcore: registered new interface driver cdc_ether [ 4.696254] usbcore: registered new interface driver net1080 [ 4.696279] usbcore: registered new interface driver cdc_subset [ 4.696303] usbcore: registered new interface driver zaurus [ 4.696334] usbcore: registered new interface driver cdc_ncm [ 4.696497] VFIO - User Level meta-driver version: 0.3 [ 4.697570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.697587] ehci-pci: EHCI PCI platform driver [ 4.697696] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.697707] ohci-pci: OHCI PCI platform driver [ 4.697741] ohci-platform: OHCI generic platform driver [ 4.702828] tegra-xusb 3610000.xhci: No USB port has OTG_CAP [ 4.706361] usbcore: registered new interface driver uas [ 4.706437] usbcore: registered new interface driver usb-storage [ 4.706520] usbcore: registered new interface driver usbserial [ 4.708016] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 4.708050] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.708067] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 4.708755] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 4.708791] tegra-xusb 3610000.xhci: irq 482, io mem 0x03610000 [ 4.709027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.709032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.709036] usb usb1: Product: xHCI Host Controller [ 4.709040] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 4.709044] usb usb1: SerialNumber: 3610000.xhci [ 4.709472] hub 1-0:1.0: USB hub found [ 4.709519] hub 1-0:1.0: 4 ports detected [ 4.710008] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.710018] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 4.710026] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 4.710246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.710251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.710255] usb usb2: Product: xHCI Host Controller [ 4.710259] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 4.710263] usb usb2: SerialNumber: 3610000.xhci [ 4.710627] hub 2-0:1.0: USB hub found [ 4.710687] hub 2-0:1.0: 4 ports detected [ 4.711429] Wake76 for irq=199 [ 4.711433] Wake77 for irq=199 [ 4.711436] Wake78 for irq=199 [ 4.711438] Wake79 for irq=199 [ 4.711441] Wake80 for irq=199 [ 4.711443] Wake81 for irq=199 [ 4.711446] Wake82 for irq=199 [ 4.711482] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 4.711488] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 4.712817] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 4.712861] Could not get extcon-dev /xudc@3550000:vbus(0) [ 4.713496] tegra-i2c c240000.i2c: no acknowledge from address 0x8 [ 4.713540] ucsi_ccg 1-0008: read version failed [ 4.713546] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 [ 4.713571] ucsi_ccg: probe of 1-0008 failed with error -121 [ 4.714032] mousedev: PS/2 mouse device common for all mice [ 4.714093] usbcore: registered new interface driver xpad [ 4.732887] extcon-disp-state external-connection:disp-state: cable 48 state 0 [ 4.732891] Extcon AUX2(HDMI) disable [ 4.758862] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4.760153] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4.780365] tegradc 15200000.nvdisplay: unblank [ 4.782129] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.782409] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.796838] Parent Clock set for DC plld3 [ 4.801331] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 4.802728] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.814319] usb usb2: usb_suspend_both: status 0 [ 4.837150] extcon-disp-state external-connection:disp-state: cable 48 state 1 [ 4.837155] Extcon AUX2(HDMI) enable [ 4.845516] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.847110] Wake73 for irq=42 [ 4.848315] rtc rtc1: alarm rtc device [ 4.848328] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.848354] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.848519] i2c /dev entries driver [ 4.851219] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 4.852882] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 4.857975] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 4.858433] FAN dev name: pwm-fan [ 4.858487] FAN:gpio request success. [ 4.858495] FAN: can't find tach_gpio [ 4.858504] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 4.858534] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.858762] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.858768] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.859538] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.859567] pwm_fan_driver pwm-fan: index 1: pwm=77, rpm=1000, rru=2, rrd=2, state:2 [ 4.859572] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 4.859577] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 4.859583] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.859587] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.859592] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.859597] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.859602] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.859606] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.860289] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.861434] device-mapper: uevent: version 1.0.3 [ 4.861814] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.866274] tegra194_cpufreq_probe: platform driver Initialization: pass [ 4.867707] cpuidle: Initializing cpuidle driver [ 4.868601] sdhci: Secure Digital Host Controller Interface driver [ 4.868604] sdhci: Copyright(c) Pierre Ossman [ 4.868606] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.869502] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.871504] CMDQ: cmdq_platfm_init successful [ 4.871960] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 4.872763] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 4.875420] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 264 [ 4.899934] tegra-se-nvhost 15810000.se: initialized [ 4.907202] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.917651] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.921720] gpio tegra-gpio wake8 for gpio=55(G:7) [ 4.921768] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.933161] tegra-se-nvhost 15820000.se: initialized [ 4.934261] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.963766] tegra-se-nvhost 15830000.se: initialized [ 4.964360] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.011041] tegra-se-nvhost 15840000.se: initialized [ 5.011949] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.013062] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 5.013221] hidraw: raw HID events driver (C) Jiri Kosina [ 5.014202] usbcore: registered new interface driver usbhid [ 5.014204] usbhid: USB HID core driver [ 5.045640] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 5.067774] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 5.068810] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 5.069221] tegra186-aondbg aondbg: aondbg driver probe() OK [ 5.069836] denver_knobs_init:MTS_VERSION:54811859 [ 5.069910] tegra186-safety-ivc b040000.sce: Probing sce safety driver [ 5.070182] tegra186-safety-ivc b040000.sce: dma address = 0xffef0000 [ 5.070197] tegra186-safety-ivc b040000.sce: cmdresp: RX: 0x0-0x1080 TX: 0x8000-0x9080 [ 5.070202] tegra186-safety-ivc b040000.sce: hb: RX: 0x1400-0x14c0 TX: 0x9400-0x94c0 [ 5.070206] tegra186-safety-ivc b040000.sce: mods: RX: 0x1500-0x1980 TX: 0x9500-0x9980 [ 5.073849] L1SS : srcID 2 destID 1 cmdID 1 ClassID 1 is_resp=0 [ 5.073856] L1SS : cmd_resp_l1_callback_not_configured: Class(1), Cmd(1), is_resp(0) not implemented [ 5.100707] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 5.106360] usb 1-2: New USB device found, idVendor=0e8f, idProduct=0020 [ 5.106365] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.106368] usb 1-2: Product: PS2toUSB Adapter [ 5.106370] usb 1-2: Manufacturer: GASIA [ 5.135093] input: GASIA PS2toUSB Adapter as /devices/3610000.xhci/usb1/1-2/1-2:1.0/0003:0E8F:0020.0001/input/input0 [ 5.194046] hid-generic 0003:0E8F:0020.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-3610000.xhci-2/input0 [ 5.208388] input: GASIA PS2toUSB Adapter as /devices/3610000.xhci/usb1/1-2/1-2:1.1/0003:0E8F:0020.0002/input/input1 [ 5.245185] mmc0: periodic cache flush enabled [ 5.245197] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.245647] mmcblk0: mmc0:0001 G1J38E 59.3 GiB [ 5.245853] mmcblk0boot0: mmc0:0001 G1J38E partition 1 31.5 MiB [ 5.246067] mmcblk0boot1: mmc0:0001 G1J38E partition 2 31.5 MiB [ 5.246288] mmcblk0rpmb: mmc0:0001 G1J38E partition 3 4.00 MiB [ 5.265985] hid-generic 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-3610000.xhci-2/input1 [ 5.327266] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 5.699257] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 5.706818] Extcon HDMI: HPD enabled [ 5.710511] tegradc 15200000.nvdisplay: hdmi: plugged [ 9.313653] tegra186-safety-ivc b040000.sce: Timed out waiting for SCE Ready [ 9.315509] tegra186-safety-ivc b040000.sce: safety: character device 0 registered [ 9.317286] tegra186-safety-ivc b040000.sce: safety: character device 1 registered [ 9.319028] tegra186-safety-ivc b040000.sce: safety: character device 2 registered [ 9.320642] tegra186-safety-ivc b040000.sce: Successfully probed safety ivc driver [ 9.322337] L1SS : Command = 8 [ 9.322890] tegra19x_actmon d230000.actmon: in actmon_register()... [ 9.325182] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 9.327440] t19x_cache tegra-cache: probed [ 9.335428] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 9.337146] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 9.339286] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 9.341371] PLL_AON clock registered [ 9.345962] Clocks initialized successfully [ 9.349194] nvpmodel: initialized successfully [ 9.352169] trusty-virtio trusty:virtio: initializing [ 9.354033] trusty_ipc virtio0: vring0: va(pa) ffffffc6baf20000(0) qsz 32 notifyid 1 [ 9.355727] trusty_ipc virtio0: vring1: va(pa) ffffffc6baf22000(0) qsz 32 notifyid 2 [ 9.357519] trusty-virtio trusty:virtio: initializing done [ 9.357651] trusty_ipc virtio0: is online [ 9.361417] tegra-hda 3510000.hda: Override SDO lines to 4 [ 9.363604] usbcore: registered new interface driver snd-usb-audio [ 9.383084] input: tegra-hda-galen-t194 HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input2 [ 9.384986] input: tegra-hda-galen-t194 HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input3 [ 9.386949] input: tegra-hda-galen-t194 HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input4 [ 9.388766] input: tegra-hda-galen-t194 HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input5 [ 9.716400] tegra-i2c c250000.i2c: no acknowledge from address 0x1a [ 9.718092] rt5659 7-001a: Device with ID register ffffff80 is not rt5659 [ 9.826758] OPE platform probe [ 9.828447] OPE platform probe successful [ 9.843183] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 9.844839] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 9.847438] u32 classifier [ 9.848975] Actions configured [ 9.850602] Initializing XFRM netlink socket [ 9.852643] NET: Registered protocol family 10 [ 9.854930] NET: Registered protocol family 17 [ 9.856474] NET: Registered protocol family 15 [ 9.858124] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 9.860235] Bluetooth: RFCOMM socket layer initialized [ 9.863458] Bluetooth: RFCOMM ver 1.11 [ 9.865679] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 9.867775] Bluetooth: HIDP socket layer initialized [ 9.870950] 9pnet: Installing 9P2000 support [ 9.874119] Key type dns_resolver registered [ 9.877440] Registered cp15_barrier emulation handler [ 9.880563] Registered setend emulation handler [ 9.885519] registered taskstats version 1 [ 9.887522] tegra-pcie-dw 14180000.pcie: Setting init speed to max speed [ 9.891520] OF: PCI: host bridge /pcie@14180000 ranges: [ 9.893679] OF: PCI: IO 0x38100000..0x381fffff -> 0x38100000 [ 9.895255] OF: PCI: MEM 0x1b40000000..0x1bffffffff -> 0x40000000 [ 9.896804] OF: PCI: MEM 0x1800000000..0x1b3fffffff -> 0x1800000000 [ 10.409959] tegra-pcie-dw 14180000.pcie: link is down [ 10.411689] tegra-pcie-dw 14180000.pcie: PCI host bridge to bus 0000:00 [ 10.413225] pci_bus 0000:00: root bus resource [bus 00-ff] [ 10.414725] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff]) [ 10.416246] pci_bus 0000:00: root bus resource [mem 0x1b40000000-0x1bffffffff] (bus address [0x40000000-0xffffffff]) [ 10.417809] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b3fffffff pref] [ 10.419305] pci 0000:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 10.419467] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 10.419655] iommu: Adding device 0000:00:00.0 to group 66 [ 10.421316] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 10.422871] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.424605] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 10.426101] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded [ 10.426197] aer 0000:00:00.0:pcie002: service driver aer loaded [ 10.426386] pcie_pme 0000:00:00.0:pcie001: unloading service driver pcie_pme [ 10.426431] aer 0000:00:00.0:pcie002: unloading service driver aer [ 10.426513] pci_bus 0000:01: busn_res: [bus 01-ff] is released [ 10.426592] iommu: Removing device 0000:00:00.0 from group 66 [ 10.428047] pci_bus 0000:00: busn_res: [bus 00-ff] is released [ 10.429437] tegra-pcie-dw 14180000.pcie: PCIe link is not up...! [ 10.431378] tegra-pcie-dw 14100000.pcie: Setting init speed to max speed [ 10.433590] OF: PCI: host bridge /pcie@14100000 ranges: [ 10.435010] OF: PCI: IO 0x30100000..0x301fffff -> 0x30100000 [ 10.436418] OF: PCI: MEM 0x1230000000..0x123fffffff -> 0x40000000 [ 10.437847] OF: PCI: MEM 0x1200000000..0x122fffffff -> 0x1200000000 [ 10.549657] tegra-pcie-dw 14100000.pcie: link is up [ 10.551343] tegra-pcie-dw 14100000.pcie: PCI host bridge to bus 0001:00 [ 10.552797] pci_bus 0001:00: root bus resource [bus 00-ff] [ 10.554219] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 10.555717] pci_bus 0001:00: root bus resource [mem 0x1230000000-0x123fffffff] (bus address [0x40000000-0x4fffffff]) [ 10.557218] pci_bus 0001:00: root bus resource [mem 0x1200000000-0x122fffffff pref] [ 10.558699] pci 0001:00:00.0: [10de:1ad2] type 01 class 0x060400 [ 10.558873] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 10.559076] iommu: Adding device 0001:00:00.0 to group 66 [ 10.560748] pci 0001:01:00.0: [10ec:8168] type 00 class 0x020000 [ 10.560873] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 10.561020] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 10.561114] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 10.561796] pci 0001:01:00.0: supports D1 D2 [ 10.561800] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 10.562129] iommu: Adding device 0001:01:00.0 to group 67 [ 10.574602] pci 0001:00:00.0: BAR 14: assigned [mem 0x1230000000-0x12300fffff] [ 10.576738] pci 0001:00:00.0: BAR 13: assigned [io 0x100000-0x100fff] [ 10.579551] pci 0001:01:00.0: BAR 4: assigned [mem 0x1230000000-0x1230003fff 64bit] [ 10.581647] pci 0001:01:00.0: BAR 2: assigned [mem 0x1230004000-0x1230004fff 64bit] [ 10.583135] pci 0001:01:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 10.584530] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 10.585924] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 10.587336] pci 0001:00:00.0: bridge window [mem 0x1230000000-0x12300fffff] [ 10.588753] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 10.590304] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 10.591917] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt [ 10.594687] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt [ 10.600983] pcie_pme 0001:00:00.0:pcie001: service driver pcie_pme loaded [ 10.601071] aer 0001:00:00.0:pcie002: service driver aer loaded [ 10.601423] r8168 0001:01:00.0: enabling device (0000 -> 0003) [ 10.606931] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 10.627272] r8168 0001:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 10.628848] r8168 0001:01:00.0 (unnamed net_device) (uninitialized): bad mac address at /chosen/nvidia,ethernet-mac: missing. [ 10.636684] r8168 0001:01:00.0 (unnamed net_device) (uninitialized): Assigning random ethernet address 22:4c:3a:18:82:f5 [ 10.647772] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 10.658764] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 10.689452] tegra-pcie-dw 14140000.pcie: Setting init speed to max speed [ 10.697344] OF: PCI: host bridge /pcie@14140000 ranges: [ 10.701361] OF: PCI: IO 0x34100000..0x341fffff -> 0x34100000 [ 10.707267] OF: PCI: MEM 0x12b0000000..0x12bfffffff -> 0x40000000 [ 10.713693] OF: PCI: MEM 0x1280000000..0x12afffffff -> 0x1280000000 [ 11.234085] tegra-pcie-dw 14140000.pcie: link is down [ 11.235808] tegra-pcie-dw 14140000.pcie: PCI host bridge to bus 0003:00 [ 11.237335] pci_bus 0003:00: root bus resource [bus 00-ff] [ 11.238895] pci_bus 0003:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x34100000-0x341fffff]) [ 11.240475] pci_bus 0003:00: root bus resource [mem 0x12b0000000-0x12bfffffff] (bus address [0x40000000-0x4fffffff]) [ 11.242106] pci_bus 0003:00: root bus resource [mem 0x1280000000-0x12afffffff pref] [ 11.243708] pci 0003:00:00.0: [10de:1ad2] type 01 class 0x060400 [ 11.243854] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold [ 11.244070] iommu: Adding device 0003:00:00.0 to group 68 [ 11.245818] pci 0003:00:00.0: PCI bridge to [bus 01-ff] [ 11.247358] pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.249156] pcieport 0003:00:00.0: Signaling PME through PCIe PME interrupt [ 11.250769] pcie_pme 0003:00:00.0:pcie001: service driver pcie_pme loaded [ 11.250854] aer 0003:00:00.0:pcie002: service driver aer loaded [ 11.251024] pcie_pme 0003:00:00.0:pcie001: unloading service driver pcie_pme [ 11.251071] aer 0003:00:00.0:pcie002: unloading service driver aer [ 11.251156] pci_bus 0003:01: busn_res: [bus 01-ff] is released [ 11.251270] iommu: Removing device 0003:00:00.0 from group 68 [ 11.252875] pci_bus 0003:00: busn_res: [bus 00-ff] is released [ 11.254779] tegra-pcie-dw 14140000.pcie: PCIe link is not up...! [ 11.256899] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 11.258903] tegra-pcie-dw 14160000.pcie: phy_get error: -19 [ 11.260819] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 11.370104] OF: PCI: host bridge /pcie@141a0000 ranges: [ 11.371712] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 11.373300] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 11.374898] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 11.889693] tegra-pcie-dw 141a0000.pcie: link is down [ 11.891470] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 11.893333] pci_bus 0005:00: root bus resource [bus 00-ff] [ 11.896483] pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff]) [ 11.898712] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 11.900374] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 11.901968] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 11.902116] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 11.902292] iommu: Adding device 0005:00:00.0 to group 68 [ 11.904020] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 11.905559] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.907357] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 11.908941] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 11.909028] aer 0005:00:00.0:pcie002: service driver aer loaded [ 11.909247] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 11.909346] aer 0005:00:00.0:pcie002: unloading service driver aer [ 11.909452] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 11.909556] iommu: Removing device 0005:00:00.0 from group 68 [ 11.911152] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 11.912676] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 11.929777] tegra-cbb 14040000.cv-noc: noc_secure_irq = 104, noc_nonsecure_irq = 103> [ 11.935937] tegra194-isp5 14800000.isp: initialized [ 11.944071] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 11.948502] tegra194-vi5 15c10000.vi: initialized [ 11.954541] tegra194-vi5 15c10000.vi: ep of_device is not enabled /host1x/vi@15c10000/ports/port@0/endpoint. [ 11.957505] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 11.959165] Could not get extcon-dev /xudc@3550000:vbus(0) [ 11.961000] tegra-thermal-throttle bthrot_cdev: clk:cpu max:2035200000, min:115200000 steps:25 [ 12.016942] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1211250000, min:114750000 steps:11 [ 12.018655] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 12.020325] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 12.022050] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:50 cutoff:0 [ 12.023687] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 12.025322] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 12.032139] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:44 cutoff:1 [ 12.033805] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 12.035436] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 12.037358] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:50 cutoff:0 [ 12.039025] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 12.041890] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 12.044515] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 12.052425] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 12.061370] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 12.070555] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:44 cutoff:1 [ 12.079015] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 12.161420] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 12.163031] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 12.164568] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 12.166045] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 12.167736] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 12.169140] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 12.170711] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (75) [ 12.171935] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 12.173962] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=4c29076f2400b1aca1797dafeba3d8643d889753 [ 12.177364] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 12.180483] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 12.187991] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 12.192302] Could not get extcon-dev /xudc@3550000:vbus(0) [ 12.198496] Wake83 for irq=211 [ 12.201260] gpio tegra-gpio wake67 for gpio=48(G:0) [ 12.206263] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 12.211857] input: gpio-keys as /devices/gpio-keys/input/input6 [ 12.219905] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 12.224594] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 12.231964] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 12.236743] Could not get extcon-dev /xudc@3550000:vbus(0) [ 12.251030] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:32 UTC (946688432) [ 12.252953] mmcblk mmc0:0001: Card claimed for testing. [ 12.293299] bpmp: mounted debugfs mirror [ 12.301229] ALSA device list: [ 12.302502] #0: tegra-hda-galen-t194 at 0x3518000 irq 74 [ 12.306301] Freeing unused kernel memory: 8640K [ 12.344797] Root device found: mmcblk0p1 [ 12.348092] Found dev node: /dev/mmcblk0p1 [ 12.440716] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 12.442039] EXT4-fs (mmcblk0p1): recovery complete [ 12.447911] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.452257] Rootfs mounted over mmcblk0p1 [ 12.477130] Switching from initrd to actual rootfs [ 12.580998] systemd[1]: System time before build time, advancing clock. [ 12.606099] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.610612] cgroup: cgroup2: unknown option "nsdelegate" [ 12.621085] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 12.624593] systemd[1]: Detected architecture arm64. [ 12.641302] systemd[1]: Set hostname to . [ 12.722790] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 12.724409] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 12.868364] random: systemd: uninitialized urandom read (16 bytes read) [ 12.870219] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.873364] random: systemd: uninitialized urandom read (16 bytes read) [ 12.877343] systemd[1]: Created slice System Slice. [ 12.880774] random: systemd: uninitialized urandom read (16 bytes read) [ 12.882579] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.885916] systemd[1]: Listening on Syslog Socket. [ 12.890174] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.954223] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 12.980769] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 13.045075] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 13.046683] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 13.049774] fpgaPcieRdma: loading out-of-tree module taints kernel. [ 13.049876] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 13.049932] Could not get extcon-dev /xudc@3550000:vbus(0) [ 13.055259] =========================== [ 13.055261] Driver Name : fpgaPcieRdma [ 13.055263] Driver time : Aug 3 2022 18:44:14 [ 13.055265] Driver version: V1.00 [ 13.055266] Driver author : LZY [ 13.055268] =========================== [ 13.265784] systemd-journald[2353]: Received request to flush runtime journal from PID 1 [ 13.946289] cpu-throttle-alert cooling device registered. [ 13.947675] gpu-throttle-alert cooling device registered. [ 13.948870] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 13.950082] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 13.950389] aux-throttle-alert cooling device registered. [ 13.952896] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 13.952931] Could not get extcon-dev /xudc@3550000:vbus(0) [ 13.957647] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 13.959855] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 13.997791] gpio tegra-gpio wake44 for gpio=192(Y:0) [ 13.998905] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 13.998942] Could not get extcon-dev /xudc@3550000:vbus(0) [ 14.002603] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 14.003773] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 14.170383] random: crng init done [ 14.171468] random: 7 urandom warning(s) missed due to ratelimiting [ 15.205500] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 15.361032] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.674661] gpio tegra-gpio wake20 for gpio=52(G:4) [ 15.680182] net eth0: get_configure_l3v4_filter --> [ 15.681435] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.708555] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.711740] eth1: 0xffffff800b1cd000, 3e:f7:26:a2:ce:7d, IRQ 573 [ 15.762766] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.028522] zram: Added device: zram0 [ 16.029303] zram: Added device: zram1 [ 16.030155] zram: Added device: zram2 [ 16.034424] zram: Added device: zram3 [ 16.036954] zram: Added device: zram4 [ 16.038601] zram: Added device: zram5 [ 16.042023] zram: Added device: zram6 [ 16.044460] zram: Added device: zram7 [ 16.073211] zram0: detected capacity change from 0 to 1827696640 [ 16.112959] Adding 1784856k swap on /dev/zram0. Priority:5 extents:1 across:1784856k SS [ 16.120442] zram1: detected capacity change from 0 to 1827696640 [ 16.140624] Adding 1784856k swap on /dev/zram1. Priority:5 extents:1 across:1784856k SS [ 16.146340] zram2: detected capacity change from 0 to 1827696640 [ 16.171285] Adding 1784856k swap on /dev/zram2. Priority:5 extents:1 across:1784856k SS [ 16.176684] zram3: detected capacity change from 0 to 1827696640 [ 16.198233] Adding 1784856k swap on /dev/zram3. Priority:5 extents:1 across:1784856k SS [ 16.204704] zram4: detected capacity change from 0 to 1827696640 [ 16.226374] Adding 1784856k swap on /dev/zram4. Priority:5 extents:1 across:1784856k SS [ 16.234374] zram5: detected capacity change from 0 to 1827696640 [ 16.255137] Adding 1784856k swap on /dev/zram5. Priority:5 extents:1 across:1784856k SS [ 16.262053] zram6: detected capacity change from 0 to 1827696640 [ 16.282298] Adding 1784856k swap on /dev/zram6. Priority:5 extents:1 across:1784856k SS [ 16.290353] zram7: detected capacity change from 0 to 1827696640 [ 16.311208] Adding 1784856k swap on /dev/zram7. Priority:5 extents:1 across:1784856k SS [ 16.515642] Bridge firewalling registered [ 16.540295] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 16.809967] Netfilter messages via NETLINK v0.30. [ 16.812846] ctnetlink v0.93: registering with nfnetlink. [ 16.982466] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 17.409914] tegradc 15200000.nvdisplay: unblank [ 18.280397] fuse init (API version 7.26) [ 19.362490] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.363918] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.553752] L1SS : Done ..but timeout ... wait for register notify [ 22.044464] L1SS : srcID 2 destID 1 cmdID 4 ClassID 2 is_resp=0 [ 22.044515] L1SS : cmd_resp_l1_user_rcv_register_notification(56) num_group=1 1028 [ 42.338092] vdd-1v8-cvb: disabling [ 42.338182] vdd-1v8-sd: disabling [ 42.338195] vdd-epb-1v0: disabling [ 42.338203] avdd-cam-2v8: disabling [ 42.338219] vdd-sata-1v5: disabling [ 42.338226] vdd-1v8-slt: disabling [ 42.338232] vdd-3v3-slt: disabling [ 42.338240] vdd-fan: disabling [ 42.338247] vdd_sys_en: disabling [ 42.338253] vdd-5v-sata: disabling [ 42.338315] vdd-3v3-pcie: disabling [ 42.338328] vdd-12v-pcie: disabling [ 338.115790] tegradc 15200000.nvdisplay: blank - powerdown [ 338.169730] extcon-disp-state external-connection:disp-state: cable 48 state 0 [ 338.169737] Extcon AUX2(HDMI) disable [ 338.194029] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 338.194819] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 349.854172] extcon-disp-state external-connection:disp-state: cable 51 state 0 [ 349.854199] Extcon HDMI: HPD disabled [ 349.854313] tegradc 15200000.nvdisplay: hdmi: unplugged [ 349.896480] tegradc 15200000.nvdisplay: blank - powerdown [ 349.896500] tegradc 15200000.nvdisplay: unblank [ 349.896522] tegradc 15200000.nvdisplay: unblank [ 350.193100] tegradc 15200000.nvdisplay: blank - powerdown [ 350.193140] tegradc 15200000.nvdisplay: unblank [ 350.194196] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 350.194431] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 350.200781] Parent Clock set for DC plld3 [ 350.205025] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 350.206469] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 350.241205] extcon-disp-state external-connection:disp-state: cable 48 state 1 [ 350.241210] Extcon AUX2(HDMI) enable [ 350.241369] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 350.241374] Extcon HDMI: HPD enabled [ 350.241406] tegradc 15200000.nvdisplay: hdmi: plugged [ 350.247279] tegradc 15200000.nvdisplay: unblank