[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5403-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:58:27 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 4130304 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4065768 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30124(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 15435872K/16521216K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 331680K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf10000000 ( 256 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc400000000 ( 16384 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000676] Console: colour dummy device 80x25 [ 0.000688] console [tty0] enabled [ 0.000695] bootconsole [tegra_comb_uart0] disabled [ 0.000709] kmemleak: Kernel memory leak detector disabled [ 0.000727] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000743] pid_max: default: 32768 minimum: 301 [ 0.001792] Security Framework initialized [ 0.002352] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.002364] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004061] ftrace: allocating 47098 entries in 184 pages [ 0.402466] sched-energy: Sched-energy-costs installed from DT [ 0.402487] ASID allocator initialised with 65536 entries [ 0.437720] tegra-id: chipid=21917. [ 0.437731] tegra-id: opt_subrevision=1. [ 0.437757] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.437784] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.437794] DTB Build time: Feb 19 2022 09:00:51 [ 0.485927] CPU1: Booted secondary processor [4e0f0040] [ 0.518036] CPU2: Booted secondary processor [4e0f0040] [ 0.550173] CPU3: Booted secondary processor [4e0f0040] [ 0.582413] CPU4: Booted secondary processor [4e0f0040] [ 0.614587] CPU5: Booted secondary processor [4e0f0040] [ 0.614819] Brought up 6 CPUs [ 0.614855] SMP: Total of 6 processors activated. [ 0.614864] CPU features: detected feature: Privileged Access Never [ 0.614871] CPU features: detected feature: LSE atomic instructions [ 0.614877] CPU features: detected feature: User Access Override [ 0.614883] CPU features: detected feature: 32-bit EL0 Support [ 0.616355] CPU: All CPU(s) started at EL2 [ 0.616400] alternatives: patching kernel code [ 0.623491] devtmpfs: initialized [ 0.664322] Initilizing CustomIPI irq domain [ 0.664570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.664585] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.686747] pinctrl core: initialized pinctrl subsystem [ 0.686970] OS set in device tree is not L4T. [ 0.687292] regulator-dummy: no parameters [ 0.687607] Initializing plugin-manager [ 0.687661] Plugin module not found [ 0.687700] Plugin-manager status disabled [ 0.688878] NET: Registered protocol family 16 [ 0.690371] pstore: using zlib compression [ 0.690397] console [pstore-1] enabled [ 0.690406] pstore: Registered ramoops as persistent store backend [ 0.690416] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.705063] cpuidle: using governor menu [ 0.705996] bpmp: waiting for handshake [ 0.706008] bpmp: handshake completed [ 0.706030] bpmp: synchronizing channels [ 0.706044] bpmp: channels synchronized [ 0.706055] bpmp: mail init ok [ 0.708514] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.708684] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.708690] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.708697] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.708703] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.708708] t19x-arm-smmu 12000000.iommu: nested translation [ 0.708717] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.708725] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.708732] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.708739] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.708745] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.712677] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.712709] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.715507] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.716525] tegra_aon_clk_init: ok [ 0.716538] Registering BPMP clocks... [ 0.716643] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.717270] Serial: AMBA PL011 UART driver [ 0.717391] tegra_powergate_init: DONE [ 0.717472] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.717486] DTB Build time: Feb 19 2022 09:00:51 [ 0.720405] Tegra reboot handler registered. [ 0.727662] iommu: Adding device 14160000.pcie to group 0 [ 0.728287] iommu: Adding device 141a0000.pcie to group 1 [ 0.729600] iommu: Adding device 2490000.ether_qos to group 2 [ 0.730079] iommu: Adding device 3100000.serial to group 3 [ 0.730516] iommu: Adding device 3110000.serial to group 4 [ 0.730893] iommu: Adding device 3140000.serial to group 5 [ 0.731469] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.731664] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.731686] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.731715] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.731724] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.731782] tegra-pmc: PMC Prod config success [ 0.732011] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.732024] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.732332] iommu: Adding device 3460000.sdhci to group 6 [ 0.732797] iommu: Adding device 3400000.sdhci to group 7 [ 0.733344] iommu: Adding device 3210000.spi to group 8 [ 0.733705] iommu: Adding device 3230000.spi to group 9 [ 0.734111] iommu: Adding device 3270000.spi to group 10 [ 0.735216] iommu: Adding device 3160000.i2c to group 11 [ 0.735583] iommu: Adding device c240000.i2c to group 12 [ 0.735935] iommu: Adding device 3180000.i2c to group 13 [ 0.736330] iommu: Adding device 3190000.i2c to group 14 [ 0.736803] iommu: Adding device 31b0000.i2c to group 15 [ 0.737263] iommu: Adding device 31c0000.i2c to group 16 [ 0.737628] iommu: Adding device c250000.i2c to group 17 [ 0.737979] iommu: Adding device 31e0000.i2c to group 18 [ 0.738517] iommu: Adding device sound to group 19 [ 0.738988] iommu: Adding device 3510000.hda to group 20 [ 0.739525] iommu: Adding device bc00000.rtcpu to group 21 [ 0.741270] iommu: Adding device 13e10000.host1x to group 22 [ 0.741678] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.742016] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.742410] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.742856] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.743372] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.743832] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.744157] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.744555] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.745090] iommu: Adding device 15340000.vic to group 31 [ 0.745512] iommu: Adding device 15380000.nvjpg to group 32 [ 0.745783] iommu: Adding device 15500000.tsec to group 33 [ 0.746062] iommu: Adding device 15100000.tsecb to group 34 [ 0.746320] iommu: Adding device 15480000.nvdec to group 35 [ 0.746587] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.746884] iommu: Adding device 154c0000.nvenc to group 37 [ 0.747143] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.747515] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.747906] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.748418] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.752470] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.752549] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.753179] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.753247] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.754803] iommu: Adding device 15c10000.vi to group 43 [ 0.754968] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.755337] iommu: Adding device 14800000.isp to group 44 [ 0.756245] iommu: Adding device 16000000.pva0 to group 45 [ 0.756795] iommu: Adding device 16800000.pva1 to group 46 [ 0.757186] iommu: Adding device 15810000.se to group 47 [ 0.757592] iommu: Adding device 15820000.se to group 48 [ 0.757870] iommu: Adding device 15830000.se to group 49 [ 0.758134] iommu: Adding device 15840000.se to group 50 [ 0.758372] iommu: Adding device c1a0000.aon to group 51 [ 0.760319] iommu: Adding device d000000.bpmp to group 52 [ 0.760679] bpmp: ping status is 0 [ 0.760808] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.765075] bpmp d000000.bpmp: probe ok [ 0.766613] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.767035] iommu: Adding device smmu_test to group 53 [ 0.768296] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.768320] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.768366] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.768389] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.768409] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.768429] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.768451] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.768469] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.768488] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.768506] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.768525] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.768544] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.768562] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.768580] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.768614] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.768637] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.768662] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.768736] mc-err: mcerr ops are set to t19x [ 0.774349] iommu: Adding device 2600000.dma to group 54 [ 0.779025] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.780251] GPIO line 339 (wifi-enable) hogged as output/high [ 0.780293] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.780330] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.780605] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.787576] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.787644] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.787680] GPIO line 266 (w-disable1) hogged as output/high [ 0.787742] GPIO line 264 (w-disable2) hogged as output/high [ 0.787777] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.788018] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.790143] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.790154] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.790164] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.790981] iommu: Adding device 3550000.xudc to group 55 [ 0.791774] iommu: Adding device 3610000.xhci to group 56 [ 0.793810] arm64_ras arm64_ras: probed [ 0.794210] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.794275] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.794334] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.794391] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.794462] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.794552] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.794744] carmel_ras_enable: RAS enabled on cpu0 [ 0.794930] carmel_ras_enable: RAS enabled on cpu1 [ 0.795112] carmel_ras_enable: RAS enabled on cpu2 [ 0.795284] carmel_ras_enable: RAS enabled on cpu3 [ 0.795463] carmel_ras_enable: RAS enabled on cpu4 [ 0.795648] carmel_ras_enable: RAS enabled on cpu5 [ 0.795777] carmel_ras carmel_ras: probed [ 0.796725] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.797163] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.797968] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.798760] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.799536] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.799965] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.801201] vdd-ac-bat: 5000 mV [ 0.801644] vdd-sdmmc1-sw: 3300 mV [ 0.802003] vdd-1v8-sd: 1800 mV [ 0.802333] vdd-3v3-cvb: 3300 mV [ 0.802620] vdd-1v8-cvb: 1800 mV [ 0.802926] vdd-epb-1v0: 1000 mV [ 0.803090] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.803388] avdd-cam-2v8: 2800 mV [ 0.803698] vdd-fan: 5000 mV [ 0.804037] vdd-hdmi-5v0: 5000 mV [ 0.804358] vdd_sys_en: 1200 mV [ 0.836842] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.840907] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.841223] SCSI subsystem initialized [ 0.841461] libata version 3.00 loaded. [ 0.841710] usbcore: registered new interface driver usbfs [ 0.841818] usbcore: registered new interface driver hub [ 0.841898] usbcore: registered new device driver usb [ 0.852745] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.855468] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 0.860399] vdd-1v0: at 1000 mV [ 0.864375] vdd-1v8-hs: at 1800 mV [ 0.868418] vdd-1v8-ls: at 1800 mV [ 0.872416] vdd-1v8-ao: at 1800 mV [ 0.876459] vddio-ddr-1v1: at 1100 mV [ 0.880229] vdd-rtc: at 800 mV [ 0.881445] spmic-ldo1: at 2375 mV [ 0.888320] vdd-ao-3v3: at 3300 mV [ 0.896313] vddio-emmc-3v3: at 3300 mV [ 0.897632] spmic-ldo4: at 1587 mV [ 0.904354] vdd-usb-3v3: at 3300 mV [ 0.912388] vddio-sdmmc1-3v3: at 3300 mV [ 0.916415] vdd-csi-1v2: at 1200 mV [ 0.918004] spmic-ldo8: at 1800 mV [ 0.922856] GPIO line 246 (gpio_default) hogged as output/high [ 0.924171] GPIO line 247 (gpio_default) hogged as output/high [ 0.924541] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.924892] max77620 4-003c: max77620 probe successful [ 0.925474] media: Linux media interface: v0.10 [ 0.925519] Linux video capture interface: v2.00 [ 0.926829] pps_core: LinuxPPS API ver. 1 registered [ 0.926836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.926877] PTP clock support registered [ 0.927147] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.927456] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.927505] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.929976] trusty trusty: trusty version: Built: 08:57:16 Feb 19 2022 [ 0.930037] trusty trusty: selected api version: 3 (requested 3) [ 0.931188] Advanced Linux Sound Architecture Driver Initialized. [ 0.931782] Bluetooth: Core ver 2.22 [ 0.931839] NET: Registered protocol family 31 [ 0.931874] Bluetooth: HCI device and connection manager initialized [ 0.931885] Bluetooth: HCI socket layer initialized [ 0.931894] Bluetooth: L2CAP socket layer initialized [ 0.931925] Bluetooth: SCO socket layer initialized [ 0.934413] camchar: rtcpu character device driver loaded [ 0.934868] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.934961] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.935893] clocksource: Switched to clocksource arch_sys_counter [ 0.983735] VFS: Disk quotas dquot_6.6.0 [ 0.983826] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.984181] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.985694] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.985756] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.986021] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.986029] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.986054] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.986061] nvmap_page_pool_init: Total RAM pages: 4047384 [ 0.986068] nvmap_page_pool_init: nvmap page pool size: 505923 pages (1976 MB) [ 0.986246] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.986568] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.989354] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.002605] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.002864] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.003097] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.003280] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.003472] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.004699] la/ptsa driver initialized. [ 1.005052] NET: Registered protocol family 2 [ 1.005149] IP idents hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.012490] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.013208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.013828] TCP: Hash tables configured (established 131072 bind 65536) [ 1.013879] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.014121] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.014635] NET: Registered protocol family 1 [ 1.015258] RPC: Registered named UNIX socket transport module. [ 1.015266] RPC: Registered udp transport module. [ 1.015271] RPC: Registered tcp transport module. [ 1.015277] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.015303] PCI: CLS 0 bytes, default 64 [ 1.015560] Trying to unpack rootfs image as initramfs... [ 1.235077] Freeing initrd memory: 7068K [ 1.252675] random: fast init done [ 1.256782] host1x 13e10000.host1x: initialized [ 1.258564] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.263566] audit: initializing netlink subsys (disabled) [ 1.263610] audit: type=2000 audit(0.876:1): initialized [ 1.264387] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.273264] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.274452] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.275028] 9p: Installing v9fs 9p2000 file system support [ 1.279750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.279871] io scheduler noop registered [ 1.280202] io scheduler cfq registered (default) [ 1.283822] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.317483] iommu: Adding device 2993000.adsp to group 57 [ 1.427949] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.428975] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.442358] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.442736] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.443270] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.443640] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.444048] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.446720] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.446922] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.449610] tsec 15500000.tsec: initialized [ 1.451185] tsec 15100000.tsecb: initialized [ 1.454777] nvdec 15480000.nvdec: initialized [ 1.457058] nvdec 15140000.nvdec1: initialized [ 1.462555] falcon 15340000.vic: initialized [ 1.464456] falcon 15380000.nvjpg: initialized [ 1.466278] falcon 154c0000.nvenc: initialized [ 1.468332] falcon 15a80000.nvenc1: initialized [ 1.471463] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.473563] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.475300] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.477129] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.478835] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.480618] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.482243] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.483869] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.487469] t194-nvcsi 15a00000.nvcsi: initialized [ 1.492826] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.493173] scare-pigeon 14b00000.isp-thi: initialized [ 1.498553] pva 16000000.pva0: initialized [ 1.504119] pva 16800000.pva1: initialized [ 1.509148] nvdla 15880000.nvdla0: initialized [ 1.513810] nvdla 158c0000.nvdla1: initialized [ 1.515243] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.515257] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.515290] tegradccommon 15200000.dc_common: dma mapping done [ 1.516351] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.516380] generic_infoframe_type: 0x87 [ 1.516448] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.516480] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.519621] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.519633] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.519643] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.519948] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.519975] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.522720] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.522729] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.526270] tegradc 15200000.nvdisplay: probed [ 1.526843] Console: switching to colour frame buffer device 80x30 [ 1.526901] tegradc 15200000.nvdisplay: fb registered [ 1.527151] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.527412] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.527446] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.527682] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.527790] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.527922] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.527930] tegra_cec 3960000.tegra_cec: probed [ 1.528763] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.528814] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.528942] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.528994] tegradc 15210000.nvdisplay: Display dc.ffffff800be50000 registered with id=1 [ 1.529178] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.529190] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.538458] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.539120] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.539142] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.539538] kfuse 3830000.kfuse: initialized [ 1.539816] tegradc 15210000.nvdisplay: probed [ 1.540402] tegradc 15210000.nvdisplay: fb registered [ 1.544105] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.544114] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.544126] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.544141] tegradc 15210000.nvdisplay: blank - powerdown [ 1.544157] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.544162] Extcon DP: HPD disabled [ 1.544166] hpd: hpd_switch 0 [ 1.544171] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.544182] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.544191] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.546942] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.549380] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.550438] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.551115] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.552179] console [ttyTCU0] enabled [ 1.552429] [drm] Initialized [ 1.564004] brd: module loaded [ 1.569152] loop: module loaded [ 1.569211] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.569332] tegra_profiler: auth: init [ 1.569856] THERMAL EST: found 3 subdevs [ 1.569863] THERMAL EST num_resources: 0 [ 1.569909] [THERMAL EST subdev 0] [ 1.569922] [THERMAL EST subdev 1] [ 1.569933] [THERMAL EST subdev 2] [ 1.569950] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.570410] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.570415] THERMAL EST: thz register success. [ 1.570615] THERMAL EST: end of probe, return err: 0 [ 1.571257] sd: No Scsi addr parsed to reserve index [ 1.571288] hisi_sas: driver version v1.6 [ 1.580895] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.580905] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.580916] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.581149] 1 ofpart partitions found on MTD device spi6.0 [ 1.581155] Creating 1 MTD partitions on "spi6.0": [ 1.581171] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.583313] libphy: Fixed MDIO Bus: probed [ 1.584025] tun: Universal TUN/TAP device driver, 1.6 [ 1.584031] tun: (C) 1999-2004 Max Krasnyansky [ 1.584644] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.584650] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.584689] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.584693] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.584727] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.584732] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.584768] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.584772] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.830999] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.831516] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 67 94 c3 [ 1.831532] Using phyrst_lpmode = 1 from DT [ 1.831686] libphy: dwc_phy: probed [ 1.833807] PPP generic driver version 2.4.2 [ 1.834218] PPP BSD Compression module registered [ 1.834226] PPP Deflate Compression module registered [ 1.834249] PPP MPPE Compression module registered [ 1.834255] NET: Registered protocol family 24 [ 1.834311] usbcore: registered new interface driver r8152 [ 1.834344] usbcore: registered new interface driver asix [ 1.834375] usbcore: registered new interface driver ax88179_178a [ 1.834401] usbcore: registered new interface driver cdc_ether [ 1.834427] usbcore: registered new interface driver net1080 [ 1.834456] usbcore: registered new interface driver cdc_subset [ 1.834483] usbcore: registered new interface driver zaurus [ 1.834520] usbcore: registered new interface driver cdc_ncm [ 1.834982] VFIO - User Level meta-driver version: 0.3 [ 1.836101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.836117] ehci-pci: EHCI PCI platform driver [ 1.836149] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.836158] ohci-pci: OHCI PCI platform driver [ 1.836187] ohci-platform: OHCI generic platform driver [ 1.840932] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.842965] tegra-xusb 3610000.xhci: extcon 0: ffffffc3ec230800 id [ 1.843387] usbcore: registered new interface driver uas [ 1.843437] usbcore: registered new interface driver usb-storage [ 1.843509] usbcore: registered new interface driver usbserial [ 1.845533] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.845586] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.845605] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.846312] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.846352] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.846551] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.846561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.846569] usb usb1: Product: xHCI Host Controller [ 1.846576] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.846584] usb usb1: SerialNumber: 3610000.xhci [ 1.847056] hub 1-0:1.0: USB hub found [ 1.847162] hub 1-0:1.0: 4 ports detected [ 1.847741] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.847776] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.847790] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.847799] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.847819] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.848051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.848060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.848068] usb usb2: Product: xHCI Host Controller [ 1.848076] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.848083] usb usb2: SerialNumber: 3610000.xhci [ 1.848503] hub 2-0:1.0: USB hub found [ 1.848543] hub 2-0:1.0: 4 ports detected [ 1.848885] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.848897] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.848922] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.849194] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.849532] Wake76 for irq=199 [ 1.849538] Wake77 for irq=199 [ 1.849542] Wake78 for irq=199 [ 1.849546] Wake79 for irq=199 [ 1.849552] Wake80 for irq=199 [ 1.849556] Wake81 for irq=199 [ 1.849559] Wake82 for irq=199 [ 1.849627] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.849634] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.849712] mousedev: PS/2 mouse device common for all mice [ 1.849810] usbcore: registered new interface driver xpad [ 1.952238] usb usb2: usb_suspend_both: status 0 [ 1.983128] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.985043] Wake73 for irq=42 [ 1.986347] rtc rtc1: alarm rtc device [ 1.986370] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.986419] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.986581] i2c /dev entries driver [ 1.989224] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.989773] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.989781] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.990323] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.013905] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.013961] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.014270] imx219 9-0010: board setup failed [ 2.014468] imx219: probe of 9-0010 failed with error -121 [ 2.014838] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.038084] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.038173] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.038459] imx219 10-0010: board setup failed [ 2.038643] imx219: probe of 10-0010 failed with error -121 [ 2.039877] max77620-power max20024-power: Event recorder REG_NVERC : 0x80 [ 2.045655] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.045991] FAN dev name: pwm-fan [ 2.046034] FAN:gpio request success. [ 2.046046] FAN: can't find tach_gpio [ 2.046056] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.046111] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.046343] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.046350] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.047014] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.047022] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.047029] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.047035] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.047041] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.047048] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.047054] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.047060] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.047067] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.047073] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.047869] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.048782] device-mapper: uevent: version 1.0.3 [ 2.049254] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.052918] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.053979] cpuidle: Initializing cpuidle driver [ 2.054738] sdhci: Secure Digital Host Controller Interface driver [ 2.054742] sdhci: Copyright(c) Pierre Ossman [ 2.054746] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.055672] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.057661] CMDQ: cmdq_platfm_init successful [ 2.058096] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.059071] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.060628] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 247 [ 2.066244] tegra-se-nvhost 15810000.se: initialized [ 2.067655] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.069004] tegra-se-nvhost 15820000.se: initialized [ 2.070329] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.071293] tegra-se-nvhost 15830000.se: initialized [ 2.072072] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.073144] tegra-se-nvhost 15840000.se: initialized [ 2.074270] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.075264] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.075427] hidraw: raw HID events driver (C) Jiri Kosina [ 2.076627] usbcore: registered new interface driver usbhid [ 2.076630] usbhid: USB HID core driver [ 2.081602] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.082694] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.083107] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.083603] denver_knobs_init:MTS_VERSION:54811859 [ 2.083871] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.084635] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.085118] t19x_cache tegra-cache: probed [ 2.087128] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.087138] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.087596] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.087998] PLL_AON clock registered [ 2.089952] Clocks initialized successfully [ 2.092005] nvpmodel: initialized successfully [ 2.092994] trusty-virtio trusty:virtio: initializing [ 2.093196] trusty_ipc virtio0: vring0: va(pa) ffffffc3e9656000(0) qsz 32 notifyid 1 [ 2.093225] trusty_ipc virtio0: vring1: va(pa) ffffffc3e964c000(0) qsz 32 notifyid 2 [ 2.093373] trusty-virtio trusty:virtio: initializing done [ 2.093664] trusty_ipc virtio0: is online [ 2.094479] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.094875] usbcore: registered new interface driver snd-usb-audio [ 2.103936] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.107849] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.108106] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.108271] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.108511] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.116056] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.116113] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.149947] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.165438] mmc0: periodic cache flush enabled [ 2.165451] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.170018] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.170360] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.170974] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.171207] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.175922] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.176781] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.203982] OPE platform probe [ 2.204107] OPE platform probe successful [ 2.216868] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 2.216876] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.216882] usb 1-2: Product: 4-Port USB 2.0 Hub [ 2.216888] usb 1-2: Manufacturer: Generic [ 2.218172] hub 1-2:1.0: USB hub found [ 2.219179] hub 1-2:1.0: 4 ports detected [ 2.281351] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.281496] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.281664] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.281810] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.281925] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.282019] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.282114] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.282210] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.282301] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.282396] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.282508] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.282623] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.282768] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.282876] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.282979] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.283075] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.283167] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.283261] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.283357] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.283469] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.312858] u32 classifier [ 2.312863] Actions configured [ 2.312933] Initializing XFRM netlink socket [ 2.313530] NET: Registered protocol family 10 [ 2.314254] NET: Registered protocol family 17 [ 2.314273] NET: Registered protocol family 15 [ 2.314339] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.314424] Bluetooth: RFCOMM socket layer initialized [ 2.314443] Bluetooth: RFCOMM ver 1.11 [ 2.314449] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.314456] Bluetooth: HIDP socket layer initialized [ 2.314473] 9pnet: Installing 9P2000 support [ 2.314532] Key type dns_resolver registered [ 2.314818] Registered cp15_barrier emulation handler [ 2.314841] Registered setend emulation handler [ 2.316594] registered taskstats version 1 [ 2.317091] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.318142] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.318188] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.318232] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.318249] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.328778] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 2.365792] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 2.365798] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.365802] usb 2-3: Product: 4-Port USB 3.0 Hub [ 2.365806] usb 2-3: Manufacturer: Generic [ 2.375830] hub 2-3:1.0: USB hub found [ 2.377273] hub 2-3:1.0: 4 ports detected [ 2.427941] tegra-pcie-dw 14160000.pcie: link is up [ 2.428156] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.428164] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.428180] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.428192] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.428197] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.428238] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.428420] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.428707] iommu: Adding device 0004:00:00.0 to group 59 [ 2.429008] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.429146] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.429347] pci 0004:01:00.0: reg 0x18: [mem 0x36200000-0x3620ffff 64bit] [ 2.430128] pci 0004:01:00.0: supports D1 D2 [ 2.430132] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.430454] iommu: Adding device 0004:01:00.0 to group 60 [ 2.440823] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.440850] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.440857] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.440939] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.440966] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.440971] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.440978] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.440997] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.441055] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.441304] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.441308] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.441315] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.441395] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.441970] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.442152] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.442163] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.475965] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.497121] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 2.497126] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.497131] usb 1-3: Product: Bluetooth Radio [ 2.497134] usb 1-3: Manufacturer: Realtek [ 2.497139] usb 1-3: SerialNumber: 00e04c000001 [ 2.527937] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.527944] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.548281] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.548320] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.548338] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.548351] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.935928] usb 1-2.2: new high-speed USB device number 4 using tegra-xusb [ 2.956360] usb 1-2.2: New USB device found, idVendor=045b, idProduct=0209 [ 2.956365] usb 1-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.957144] hub 1-2.2:1.0: USB hub found [ 2.957205] hub 1-2.2:1.0: 4 ports detected [ 3.065022] tegra-pcie-dw 141a0000.pcie: link is down [ 3.065135] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.065143] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.065160] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.065171] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.065176] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.065212] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.065363] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.065580] iommu: Adding device 0005:00:00.0 to group 61 [ 3.065784] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.065806] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.065973] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.065980] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.066054] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.066229] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.066272] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.066364] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.066466] iommu: Removing device 0005:00:00.0 from group 61 [ 3.066489] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.068074] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.077970] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 3.082840] tegra194-isp5 14800000.isp: initialized [ 3.089918] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.093031] tegra194-vi5 15c10000.vi: initialized [ 3.096346] usb 2-3.2: new SuperSpeed USB device number 3 using tegra-xusb [ 3.097517] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.097685] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.097907] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.102220] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.102243] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.102249] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.102317] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.102352] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.102356] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.106532] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.106592] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.106598] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.107079] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.107120] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.107125] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.107653] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.107693] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.107698] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.107950] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.108743] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.122214] usb 2-3.2: New USB device found, idVendor=045b, idProduct=0210 [ 3.122221] usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.126006] hub 2-3.2:1.0: USB hub found [ 3.126378] hub 2-3.2:1.0: 4 ports detected [ 3.185874] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.186348] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.186667] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.186927] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.187262] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.187353] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.187584] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 3.187589] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.188908] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=1d7bd17f78528535d57449fa59ec355e37add4f8 [ 3.189396] Wake83 for irq=211 [ 3.189482] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.189578] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.189730] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.220951] tegra_rtc c2a0000.rtc: setting system clock to 2022-11-08 02:10:45 UTC (1667873445) [ 3.221519] mmcblk mmc0:0001: Card claimed for testing. [ 3.243972] usb 1-2.2.3: new low-speed USB device number 5 using tegra-xusb [ 3.258187] bpmp: mounted debugfs mirror [ 3.259930] usb 2-3.2: usb_suspend_both: status 0 [ 3.264971] ALSA device list: [ 3.264976] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 3.264980] #1: jetson-xaviernx-ape [ 3.268020] Freeing unused kernel memory: 8640K [ 3.269850] usb 1-2.2.3: New USB device found, idVendor=046d, idProduct=c31d [ 3.269857] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.269861] usb 1-2.2.3: Product: USB Keyboard [ 3.269866] usb 1-2.2.3: Manufacturer: Logitech [ 3.275761] input: Logitech USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/0003:046D:C31D.0001/input/input5 [ 3.306497] Root device found: mmcblk0p1 [ 3.308439] Found dev node: /dev/mmcblk0p1 [ 3.315949] usb 2-3: usb_suspend_both: status 0 [ 3.316201] usb usb2: usb_suspend_both: status 0 [ 3.332424] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3610000.xhci-2.2.3/input0 [ 3.339537] input: Logitech USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.1/0003:046D:C31D.0002/input/input6 [ 3.396520] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3610000.xhci-2.2.3/input1 [ 3.423737] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 3.423743] EXT4-fs (mmcblk0p1): recovery complete [ 3.428869] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.431719] Rootfs mounted over mmcblk0p1 [ 3.452547] Switching from initrd to actual rootfs [ 3.475927] usb 1-2.2.4: new low-speed USB device number 6 using tegra-xusb [ 3.499573] usb 1-2.2.4: New USB device found, idVendor=0461, idProduct=4de2 [ 3.499581] usb 1-2.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.499585] usb 1-2.2.4: Product: USB Optical Mouse [ 3.502606] input: USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:0461:4DE2.0003/input/input7 [ 3.502957] hid-generic 0003:0461:4DE2.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-3610000.xhci-2.2.4/input0 [ 3.567976] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.571341] cgroup: cgroup2: unknown option "nsdelegate" [ 3.578340] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.579028] systemd[1]: Detected architecture arm64. [ 3.585797] systemd[1]: Set hostname to . [ 3.669983] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.669997] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.817360] random: systemd: uninitialized urandom read (16 bytes read) [ 3.817398] systemd[1]: Reached target User and Group Name Lookups. [ 3.817813] random: systemd: uninitialized urandom read (16 bytes read) [ 3.818172] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.818208] random: systemd: uninitialized urandom read (16 bytes read) [ 3.820981] systemd[1]: Created slice User and Session Slice. [ 3.821200] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.822343] systemd[1]: Created slice System Slice. [ 3.876935] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.919812] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.201924] systemd-journald[2391]: Received request to flush runtime journal from PID 1 [ 4.968777] random: crng init done [ 4.968891] random: 7 urandom warning(s) missed due to ratelimiting [ 5.286230] cpu-throttle-alert cooling device registered. [ 5.292516] gpu-throttle-alert cooling device registered. [ 5.292968] aux-throttle-alert cooling device registered. [ 5.296162] usbcore: registered new interface driver btusb [ 5.301244] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 5.301251] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 5.301254] rtk_btcoex: create workqueue [ 5.302372] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 5.302449] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 5.302456] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 5.302460] rtk_btusb: patch_add [ 5.302463] rtk_btusb: auto suspend is disabled [ 5.302468] rtk_btusb: pid = 0x3549 [ 5.302471] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 5.302485] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 5.306672] rtk_btusb: btusb_probe: done [ 5.306687] rtk_btusb: btusb_open start [ 5.306693] rtk_btusb: btusb_open hdev->promisc ==0 [ 5.306697] rtk_btusb: download_patch start [ 5.306707] rtk_btusb: chip type value: 0x73 [ 5.306713] rtk_btusb: HCI reset. [ 5.306812] usbcore: registered new interface driver rtk_btusb [ 5.313215] using random self ethernet address [ 5.313345] using random host ethernet address [ 5.317966] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 5.317972] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 5.317977] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 5.317981] rtk_btusb: load_firmware start [ 5.317985] rtk_btusb: lmp_version = 0x8822 [ 5.317989] rtk_btusb: config filename rtl8822cu_config [ 5.325883] rtk_btusb: no bdaddr file /opt/bdaddr [ 5.325890] rtk_btusb: 55 ab 23 87 00 00 [ 5.325901] rtk_btusb: Config file length 6, new length 6 [ 5.325905] rtk_btusb: fw name is rtl8822cu_fw [ 5.329450] rtk_btusb: This is not 8723a, use new patch style! [ 5.329458] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 5.330968] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 5.330976] rtk_btusb: load_firmware: New gEVersion 3 [ 5.330981] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 5.330986] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 5.330989] rtk_btusb: fw_version = 0x98a42f7 [ 5.330992] rtk_btusb: number_of_total_patch = 3 [ 5.330995] rtk_btusb: chipID 4 [ 5.330999] rtk_btusb: patch_length 0x55f0 [ 5.331003] rtk_btusb: start_offset 0x00005d00 [ 5.331006] rtk_btusb: Svn version: 21761 [ 5.331011] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 5.331014] rtk_btusb: buf_len = 0x55f6 [ 5.331030] rtk_btusb: fw: exists, config file: exists [ 5.331033] rtk_btusb: load_firmware done [ 5.331054] rtk_btusb: download_data start [ 5.447992] rtk_btusb: download_data done [ 5.447998] rtk_btusb: HCI reset. [ 5.458969] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 5.458976] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 5.458979] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 5.458992] rtk_btusb: Rtk patch end 0 [ 5.458996] rtk_btusb: btusb_open set HCI_RUNNING [ 5.459035] rtk_btcoex: Open BTCOEX [ 5.459039] rtk_btusb: btusb_open end [ 5.467993] rtk_btcoex: BTCOEX hci_rev 0x098a [ 5.468001] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 5.489970] rtk_btusb: btusb_notify: hci0 evt 3 [ 5.821361] Mass Storage Function, version: 2009/09/11 [ 5.821371] LUN: removable file: (no medium) [ 5.829442] using random self ethernet address [ 5.829574] using random host ethernet address [ 5.860723] rndis0: HOST MAC ba:99:e9:fd:f7:9c [ 5.861375] rndis0: MAC ba:99:e9:fd:f7:9d [ 5.862381] usb0: HOST MAC ba:99:e9:fd:f7:9e [ 5.862631] usb0: MAC ba:99:e9:fd:f7:9f [ 5.862655] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.863459] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.863478] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.863517] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.863779] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.863797] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.864342] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.864360] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.864536] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.876288] l4tbr0: port 1(rndis0) entered blocking state [ 5.876295] l4tbr0: port 1(rndis0) entered disabled state [ 5.877369] device rndis0 entered promiscuous mode [ 5.885023] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.891031] l4tbr0: port 2(usb0) entered blocking state [ 5.891038] l4tbr0: port 2(usb0) entered disabled state [ 5.891217] device usb0 entered promiscuous mode [ 5.899529] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.202833] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.208490] ras_fhi_disable: FHI 474 disabled [ 6.210152] CPU4: shutdown [ 6.210269] psci: CPU4 killed (polled 0 ms) [ 6.280554] ras_fhi_disable: FHI 475 disabled [ 6.283095] CPU5: shutdown [ 6.283215] psci: CPU5 killed (polled 0 ms) [ 6.306460] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.505578] zram: Added device: zram0 [ 6.506028] zram: Added device: zram1 [ 6.508764] zram: Added device: zram2 [ 6.510436] zram: Added device: zram3 [ 6.530482] zram0: detected capacity change from 0 to 2074271744 [ 6.541003] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.553870] net eth0: get_configure_l3v4_filter --> [ 6.557009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.598982] Adding 2025652k swap on /dev/zram0. Priority:5 extents:1 across:2025652k SS [ 6.607751] zram1: detected capacity change from 0 to 2074271744 [ 6.627115] Adding 2025652k swap on /dev/zram1. Priority:5 extents:1 across:2025652k SS [ 6.634634] zram2: detected capacity change from 0 to 2074271744 [ 6.648528] Adding 2025652k swap on /dev/zram2. Priority:5 extents:1 across:2025652k SS [ 6.660789] zram3: detected capacity change from 0 to 2074271744 [ 6.682378] Adding 2025652k swap on /dev/zram3. Priority:5 extents:1 across:2025652k SS [ 6.867063] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.867078] Bluetooth: BNEP socket layer initialized [ 7.078686] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.411268] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.411419] Bridge firewalling registered [ 7.431921] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.586238] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.765233] tegradc 15200000.nvdisplay: blank - powerdown [ 7.765250] tegradc 15210000.nvdisplay: blank - powerdown [ 7.777625] Netfilter messages via NETLINK v0.30. [ 7.779770] ctnetlink v0.93: registering with nfnetlink. [ 7.993982] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 8.899592] fuse init (API version 7.26) [ 9.591124] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.597002] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready