[0000.140] I> sdmmc DDR50 mode [0000.144] I> Active Boot chain : 0 [0000.147] I> Boot-device: eMMC [0000.151] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.159] I> Temperature = 33000 [0000.162] W> Skipping boost for clk: BPMP_CPU_NIC [0000.166] W> Skipping boost for clk: BPMP_APB [0000.170] W> Skipping boost for clk: AXI_CBB [0000.174] W> Skipping boost for clk: AON_CPU_NIC [0000.178] W> Skipping boost for clk: CAN1 [0000.182] W> Skipping boost for clk: CAN2 [0000.186] I> Boot-device: eMMC [0000.189] I> Boot-device: eMMC [0000.198] I> Sdmmc: HS400 mode enabled [0000.203] I> ECC region[0]: Start:0x0, End:0x0 [0000.207] I> ECC region[1]: Start:0x0, End:0x0 [0000.211] I> ECC region[2]: Start:0x0, End:0x0 [0000.215] I> ECC region[3]: Start:0x0, End:0x0 [0000.219] I> ECC region[4]: Start:0x0, End:0x0 [0000.224] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.229] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.234] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.238] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.243] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.248] E> FAILED: Thermal config [0000.255] E> FAILED: MEMIO rail config [0000.268] I> Boot-device: eMMC [0000.278] I> sdmmc bdev is already initialized [0000.350] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.359] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.359] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.360] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.360] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.366] W> device prod register failed [0000.370] I> Boot-device: eMMC [0000.373] I> Boot_device: SDMMC_BOOT instance: 3 [0000.379] I> sdmmc-3 params source = boot args [0000.382] I> sdmmc bdev is already initialized [0000.386] I> sdmmc-3 params source = boot args [0000.394] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.401] I> Found 43 partitions in SDMMC_USER (instance 3) [0000.402] I> Active Boot chain : 0 [0000.405] I> parsing oem signed section of bpmp-fw header done [0000.410] I> bpmp-fw binary init read from storage [0000.415] I> oem authentication of bpmp-fw header done [0000.422] I> bpmp-fw binary done read from storage [0000.424] I> bpmp-fw: Authentication init Done [0000.429] I> parsing oem signed section of cpubl header done [0000.434] I> cpubl binary init read from storage [0000.439] I> bpmp-fw: Authentication Finalize Done [0000.444] I> oem authentication of cpubl header done [0000.448] I> cpubl binary done read from storage [0000.453] I> cpubl: Authentication init Done [0000.458] I> parsing oem signed section of rce header done [0000.462] I> rce binary init read from storage [0000.467] I> Relocating BR-BCT [0000.469] I> cpubl: Authentication Finalize Done [0000.474] I> oem authentication of rce header done [0000.478] I> rce binary done read from storage [0000.483] I> rce: Authentication init Done [0000.487] I> parsing oem signed section of ape header done [0000.492] I> ape binary init read from storage [0000.496] I> rce: Authentication Finalize Done [0000.501] I> oem authentication of ape header done [0000.505] I> ape binary done read from storage [0000.509] I> ape: Authentication init Done [0000.514] I> parsing oem signed section of tos header done [0000.519] I> tos binary init read from storage [0000.523] I> ape: Authentication Finalize Done [0000.528] I> oem authentication of tos header done [0000.532] I> tos binary done read from storage [0000.536] I> tos: Authentication init Done [0000.540] I> parsing oem signed section of bpmp-fw-dtb header done [0000.546] I> bpmp-fw-dtb binary init read from storage [0000.551] I> tos: Authentication Finalize Done [0000.557] I> oem authentication of bpmp-fw-dtb header done [0000.564] I> bpmp-fw-dtb binary done read from storage [0000.566] I> bpmp-fw-dtb: Authentication init Done [0000.571] I> parsing oem signed section of cpubl-dtb header done [0000.576] I> cpubl-dtb binary init read from storage [0000.581] I> bpmp-fw-dtb: Authentication Finalize Done [0000.619] I> oem authentication of cpubl-dtb header done [0000.620] I> cpubl-dtb binary done read from storage [0000.620] I> cpubl-dtb: Authentication init Done [0000.622] I> parsing oem signed section of eks header done [0000.623] I> eks binary init read from storage [0000.623] I> cpubl-dtb: Authentication Finalize Done [0000.624] I> oem authentication of eks header done [0000.628] I> eks binary done read from storage [0000.632] I> eks: Authentication init Done [0000.636] I> eks: Authentication Finalize Done [0000.640] I> EKB detected (length: 0x410) @ VA:0x52700400 ÿäNOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ÿá ÿâmrq initialized ÿá[0001.109] I> Welcome to Cboot ÿâfmon_post initialized ÿá[0001.110] I> Cboot Version: t194-cfa2bc91 [0001.110] I> CPU-BL Params @ 0xf2820000 [0001.110] I> 0) Base:0x00000000 Size:0x00000000 [0001.114] I> 1) Base:0xf1100000 Size:0x00100000 [0001.119] I> 2) Base:0xf2000000 Size:0x00200000 [0001.123] I> 3) Base:0xf1200000 Size:0x00200000 [0001.127] I> 4) Base:0xf1000000 Size:0x00100000 ÿâclk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ÿá[0001.132] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.211] I> 6) Base:0xf3800000 Size:0x00400000 [0001.216] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.220] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.225] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.229] I> 10) Base:0xf3000000 Size:0x00800000 [0001.234] I> 11) Base:0x40000000 Size:0x00040000 [0001.238] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.243] I> 13) Base:0x40046000 Size:0x00002000 [0001.247] I> 14) Base:0x40048000 Size:0x00002000 ÿâemc_debugfs initialized dvs_debugfs initialized ÿá[0001.252] I> 15) Base:0xac000000 Size:0x00004000 ÿâfmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0001.261] I> 16) Base:0x4004a000 Size:0x00002000 [0001.311] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.316] I> 18) Base:0x4004c000 Size:0x00002000 [0001.320] I> 19) Base:0xf2200000 Size:0x00600000 [0001.325] I> 20) Base:0x4004e000 Size:0x00002000 [0001.329] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.333] I> 22) Base:0x00000000 Size:0x00000000 [0001.338] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.342] I> 24) Base:0xf6000000 Size:0x02000000 [0001.347] I> 25) Base:0x40050000 Size:0x00002000 [0001.351] I> 26) Base:0x40040000 Size:0x00006000 [0001.356] I> 27) Base:0xf1800000 Size:0x00400000 [0001.360] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.365] I> 29) Base:0xf1400000 Size:0x00400000 [0001.369] I> 30) Base:0x00000000 Size:0x00000000 [0001.374] I> 31) Base:0x00000000 Size:0x00000000 [0001.378] I> 32) Base:0xf8000000 Size:0x08000000 [0001.383] I> 33) Base:0x00000000 Size:0x00000000 [0001.387] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.392] I> 35) Base:0xab000000 Size:0x01000000 [0001.396] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.400] I> 37) Base:0xf2800000 Size:0x00800000 [0001.405] I> 38) Base:0x80000000 Size:0x20000000 [0001.409] I> 39) Base:0xb0000000 Size:0x08000000 [0001.414] I> 40) Base:0x00000000 Size:0x00000000 [0001.418] I> 41) Base:0x00000000 Size:0x00000000 [0001.423] I> 42) Base:0x00000000 Size:0x00000000 [0001.427] I> 43) Base:0x00000000 Size:0x00000000 [0001.432] I> 44) Base:0x00000000 Size:0x00000000 [0001.436] I> 45) Base:0x00000000 Size:0x00000000 [0001.441] GIC-SPI Target CPU: 0 [0001.444] Interrupts Init done [0001.446] calling constructors [0001.449] initializing heap [0001.452] I> Heap: [0xa0699b80 ... 0xab000000] [0001.456] initializing threads [0001.459] initializing timers [0001.462] creating bootstrap completion thread [0001.466] top of bootstrap2() [0001.469] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.474] initializing platform [0001.477] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.482] W> device prod register failed [0001.486] I> Bl_dtb @0xaaf00000 [0001.492] W> "plugin-manager" doesn't exist, creating [0001.494] W> "ids" doesn't exist, creating [0001.498] W> "connection" doesn't exist, creating [0001.502] W> "configs" doesn't exist, creating [0001.515] E> failed to read label property for node 227172: 13 [0001.518] E> failed to read reg property for node 227260: 13 [0001.520] E> failed to read label property for node 227312: 13 [0001.525] E> failed to read label property for node 227380: 13 [0001.530] E> failed to read label property for node 227416: 13 [0001.536] E> failed to read label property for node 227452: 13 [0001.541] E> failed to read reg property for node 227520: 13 [0001.547] E> failed to read label property for node 227572: 13 [0001.553] I> Find /i2c@3160000's alias i2c0 [0001.556] I> Reading eeprom i2c=0 address=0x50 [0001.585] I> Device at /i2c@3160000:0x50 [0001.586] I> Reading eeprom i2c=0 address=0x56 [0001.610] I> Device at /i2c@3160000:0x56 [0001.611] I> Find /i2c@3180000's alias i2c2 [0001.611] I> Reading eeprom i2c=2 address=0x54 [0001.613] E> I2C: slave not found in slaves. [0001.613] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.614] E> I2C_DEV: Failed to send register address 0x00000000. [0001.615] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.624] E> eeprom: Failed to read I2C slave device [0001.629] I> Eeprom read failed 0x3526070d [0001.633] I> Reading eeprom i2c=2 address=0x57 [0001.637] E> I2C: slave not found in slaves. [0001.641] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.649] E> I2C_DEV: Failed to send register address 0x00000000. [0001.655] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.664] E> eeprom: Failed to read I2C slave device [0001.669] I> Eeprom read failed 0x3526070d [0001.673] I> Reading eeprom i2c=2 address=0x52 [0001.677] E> I2C: slave not found in slaves. [0001.681] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.689] E> I2C_DEV: Failed to send register address 0x00000000. [0001.695] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.704] E> eeprom: Failed to read I2C slave device [0001.709] I> Eeprom read failed 0x3526070d [0001.714] I> Find /i2c@c240000's alias i2c1 [0001.717] I> Reading eeprom i2c=1 address=0x52 [0001.723] E> I2C: slave not found in slaves. [0001.725] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.733] E> I2C_DEV: Failed to send register address 0x00000000. [0001.739] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.748] E> eeprom: Retry to read I2C slave device. [0001.753] E> I2C: slave not found in slaves. [0001.757] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.765] E> I2C_DEV: Failed to send register address 0x00000000. [0001.771] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.780] E> eeprom: Failed to read I2C slave device [0001.785] I> Eeprom read failed 0x3526070d [0001.789] I> Reading eeprom i2c=1 address=0x50 [0001.793] E> I2C: slave not found in slaves. [0001.797] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.805] E> I2C_DEV: Failed to send register address 0x00000000. [0001.811] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.820] E> eeprom: Retry to read I2C slave device. [0001.825] E> I2C: slave not found in slaves. [0001.829] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.837] E> I2C_DEV: Failed to send register address 0x00000000. [0001.843] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.852] E> eeprom: Failed to read I2C slave device [0001.857] I> Eeprom read failed 0x3526070d [0001.861] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0001.866] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.877] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0001.882] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.893] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.901] W> "i2c@3160000" doesn't exist, creating [0001.905] W> "module@0x50" doesn't exist, creating [0001.910] I> Adding plugin-manager/ids/XXXX-XXXX-XXX=/i2c@3160000:module@0x56 [0001.917] W> "module@0x56" doesn't exist, creating [0001.922] I> Adding plugin-manager/cvm [0001.925] W> "chip-id" doesn't exist, creating [0001.929] I> Adding plugin-manager/chip-id/A02P [0001.934] I> Plugin-manager override starting [0001.938] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.946] I> node /plugin-manager/fragement-soft-wdt matches [0001.954] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.958] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.969] I> Disable plugin-manager status in FDT [0001.970] I> Plugin-manager override finished successfully [0001.971] I> gpio framework initialized [0001.975] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.983] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.989] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.997] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.005] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.011] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.017] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.025] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.032] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.039] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.047] I> fixed regulator driver initialized [0002.058] I> register 'maxim' power off handle [0002.059] I> virtual i2c enabled [0002.059] I> registered 'maxim,max20024' pmic [0002.061] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.068] I> Boot-device: eMMC [0002.070] I> Boot_device: SDMMC_BOOT instance: 3 [0002.079] I> sdmmc-3 params source = boot args [0002.079] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.084] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.095] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0002.101] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0002.112] I> sdmmc bdev is already initialized [0002.116] I> sdmmc-3 params source = boot args [0002.147] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.159] I> Found 43 partitions in SDMMC_USER (instance 3) [0002.168] I> enabling 'vdd-hdmi-5v0' regulator [0002.173] I> regulator 'vdd-hdmi-5v0' already enabled [0002.173] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.174] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.178] E> invalid display type [0002.181] E> invalid display type [0002.182] E> cannot find any other nvdisp nodes [0002.182] E> no valid display unit config found in dtb [0002.184] W> display init failed [0002.184] I> Load in CBoot Boot Options partition and parse it [0002.196] E> Error -9 when finding node with path /boot-configuration [0002.197] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.204] I> Using default boot order [0002.207] I> boot-dev-order :- [0002.210] I> 1.sd [0002.212] I> 2.usb [0002.214] I> 3.nvme [0002.216] I> 4.emmc [0002.217] I> 5.net [0002.219] I> Hit any key to stop autoboot: 4 3 2 1 [0004.227] initializing target [0004.227] calling apps_init() [0004.228] starting app kernel_boot_app [0004.247] I> found decompressor handler: lz4-legacy [0004.248] I> decompressing BMP blob ... [0004.259] I> Kernel type = Normal [0004.259] I> ########## SD (0) boot ########## [0004.259] I> Found sdcard [0004.262] I> enabling 'vdd-sdmmc1-sw' regulator [0004.266] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.271] E> Error in command_complete 18001 int_status [0004.271] E> Sending CMD_SD_SEND_IF_COND failed [0004.282] W> Error opening sdcard-0 [0004.282] I> -0 params source = [0004.282] W> Failed to initialize device 6-0 [0004.283] E> SD boot failed, err: 252643078 [0004.283] I> ########## USB (0) boot ########## [0004.294] I> Validate XUSB-FW ... [0004.294] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.296] I> Encryption fuse is not ON [0004.297] I> USB Firmware Version: 60.09 release [0004.354] I> regulator of usb2-0 already enabled [0004.359] I> regulator of usb2-1 already enabled [0004.365] I> regulator of usb2-2 already enabled [0004.373] I> enabling 'vdd-5v-sata' regulator [0005.440] I> USB 2.0 port 3 new full-speed USB device detected [0005.542] I> Start to enumerate device [0005.546] I> This device is non-MSD, skip enumeration [0005.547] E> Failed to enumerate USB device [0005.547] E> failed to start xhci controller [0005.547] E> Error in init of XUSB host driver, err: 7979000d [0005.548] W> Failed to initialize device 5-0 [0005.548] E> USB boot failed, err: 2037973005 [0005.549] I> ########## NVME (0) boot ########## [0005.553] I> Initializing nvme device instance 0 [0005.557] I> Initializing nvme controller [0005.561] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.568] I> vpcie3v3-supply not found [0005.571] I> vpcie12v-supply not found [0005.575] W> Failed to get nvidia,plat-gpios [0005.579] I> tegrabl_pcie_soc_preinit: (0): [0005.583] I> Unpowergate [0005.585] I> tegrabl_car_clk_disable(0) ... [0005.589] I> tegrabl_car_rst_set(CORE, 0) ... [0005.593] I> tegrabl_car_rst_set(APB, 0) ... [0005.598] I> tegrabl_car_clk_enable(0) ... [0005.602] I> tegrabl_car_rst_clear(APB, 0) ... [0005.606] I> tegrabl_set_ctrl_state(0) [0005.609] I> CLR PCIE_APB:6 [0005.612] I> tegrabl_pcie_soc_init: (0): [0005.616] I> APPL initialization ... [0005.619] I> poweron phys [0005.622] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0005.628] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0005.633] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0005.639] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0005.644] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0006.749] C> Failed to link up controller-0 [0006.750] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0006.750] I> Failed to initialize SoC Host PCIe controller [0006.751] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0006.751] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0006.752] W> Failed to open NVME-0, err = 80800612 [0006.756] W> Failed to initialize device 10-0 [0006.761] E> NVME (0) boot failed, err: 0x80800612 [0006.765] I> ########## NVME (1) boot ########## [0006.770] I> Initializing nvme device instance 1 [0006.774] I> Initializing nvme controller [0006.778] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.784] I> vpcie3v3-supply not found [0006.788] I> vpcie12v-supply not found [0006.792] W> Failed to get nvidia,plat-gpios [0006.796] I> tegrabl_pcie_soc_preinit: (1): [0006.800] I> Unpowergate [0006.802] I> tegrabl_car_clk_disable(1) ... [0006.806] I> tegrabl_car_rst_set(CORE, 1) ... [0006.810] I> tegrabl_car_rst_set(APB, 1) ... [0006.814] I> tegrabl_car_clk_enable(1) ... [0006.818] I> tegrabl_car_rst_clear(APB, 1) ... [0006.823] I> tegrabl_set_ctrl_state(1) [0006.826] I> CLR PCIE_APB:6 [0006.829] I> tegrabl_pcie_soc_init: (1): [0006.833] I> APPL initialization ... [0006.836] I> poweron phys [0006.839] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0006.845] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0007.950] C> Failed to link up controller-1 [0007.951] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0007.951] I> Failed to initialize SoC Host PCIe controller [0007.952] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(1); error=0x12 [0007.952] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0007.953] W> Failed to open NVME-1, err = 80800612 [0007.957] W> Failed to initialize device 10-1 [0007.962] E> NVME (1) boot failed, err: 0x80800612 [0007.966] I> ########## NVME (2) boot ########## [0007.971] I> Initializing nvme device instance 2 [0007.975] I> Initializing nvme controller [0007.979] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0007.985] I> vpcie3v3-supply not found [0007.989] I> vpcie12v-supply not found [0007.993] W> Failed to get nvidia,plat-gpios [0007.997] I> tegrabl_pcie_soc_preinit: (2): [0008.001] I> Unpowergate [0008.003] I> tegrabl_car_clk_disable(2) ... [0008.007] I> tegrabl_car_rst_set(CORE, 2) ... [0008.011] I> tegrabl_car_rst_set(APB, 2) ... [0008.015] I> tegrabl_car_clk_enable(2) ... [0008.019] I> tegrabl_car_rst_clear(APB, 2) ... [0008.024] I> tegrabl_set_ctrl_state(2) [0008.027] I> CLR PCIE_APB:6 [0008.030] I> tegrabl_pcie_soc_init: (2): [0008.034] I> APPL initialization ... [0008.037] I> poweron phys [0008.040] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0008.046] I> tegrabl_power_on_phy: controller 2 not available [0008.051] E> Failed to power on phy on controller-2 [0008.056] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.061] I> Failed to initialize SoC Host PCIe controller [0008.066] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0008.073] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.079] W> Failed to open NVME-2, err = 80800601 [0008.084] W> Failed to initialize device 10-2 [0008.088] E> NVME (2) boot failed, err: 0x80800601 [0008.093] I> ########## NVME (3) boot ########## [0008.097] I> Initializing nvme device instance 3 [0008.102] I> Initializing nvme controller [0008.106] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0008.112] I> vpcie3v3-supply not found [0008.116] I> vpcie12v-supply not found [0008.119] W> Failed to get nvidia,plat-gpios [0008.123] I> tegrabl_pcie_soc_preinit: (3): [0008.127] I> Unpowergate [0008.130] I> tegrabl_car_clk_disable(3) ... [0008.134] I> tegrabl_car_rst_set(CORE, 3) ... [0008.138] I> tegrabl_car_rst_set(APB, 3) ... [0008.142] I> tegrabl_car_clk_enable(3) ... [0008.146] I> tegrabl_car_rst_clear(APB, 3) ... [0008.150] I> tegrabl_set_ctrl_state(3) [0008.154] I> CLR PCIE_APB:6 [0008.157] I> tegrabl_pcie_soc_init: (3): [0008.160] I> APPL initialization ... [0008.164] I> poweron phys [0008.166] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0008.172] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0009.278] C> Failed to link up controller-3 [0009.279] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.279] I> Failed to initialize SoC Host PCIe controller [0009.279] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0009.280] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.280] W> Failed to open NVME-3, err = 80800612 [0009.285] W> Failed to initialize device 10-3 [0009.289] E> NVME (3) boot failed, err: 0x80800612 [0009.294] I> ########## NVME (4) boot ########## [0009.298] I> Initializing nvme device instance 4 [0009.303] I> Initializing nvme controller [0009.307] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0009.313] I> vpcie3v3-supply not found [0009.316] I> vpcie12v-supply not found [0009.320] W> Failed to get nvidia,plat-gpios [0009.324] I> tegrabl_pcie_soc_preinit: (4): [0009.328] I> Unpowergate [0009.331] I> tegrabl_car_clk_disable(4) ... [0009.335] I> tegrabl_car_rst_set(CORE, 4) ... [0009.339] I> tegrabl_car_rst_set(APB, 4) ... [0009.343] I> tegrabl_car_clk_enable(4) ... [0009.347] I> tegrabl_car_rst_clear(APB, 4) ... [0009.351] I> tegrabl_set_ctrl_state(4) [0009.355] I> CLR PCIE_APB:6 [0009.357] I> tegrabl_pcie_soc_init: (4): [0009.361] I> APPL initialization ... [0009.364] I> poweron phys [0009.367] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0009.373] I> tegrabl_power_on_phy: controller 4 not available [0009.379] E> Failed to power on phy on controller-4 [0009.384] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0009.389] I> Failed to initialize SoC Host PCIe controller [0009.394] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0009.400] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0009.407] W> Failed to open NVME-4, err = 80800601 [0009.411] W> Failed to initialize device 10-4 [0009.416] E> NVME (4) boot failed, err: 0x80800601 [0009.420] I> ########## NVME (5) boot ########## [0009.425] I> Initializing nvme device instance 5 [0009.429] I> Initializing nvme controller [0009.434] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.439] I> i=0, reg_phandle=0x1b [0009.445] I> reg_voltage=3300000 [0009.446] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0009.457] I> enabling 'vdd-3v3-pcie' regulator [0009.457] I> i=1, reg_phandle=0x1c [0009.462] I> reg_voltage=1200000 [0009.464] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0009.475] I> enabling 'vdd-12v-pcie' regulator [0009.475] I> tegrabl_pcie_soc_preinit: (5): [0009.479] I> Unpowergate [0009.482] I> tegrabl_car_clk_disable(5) ... [0009.486] I> tegrabl_car_rst_set(CORE, 5) ... [0009.490] I> tegrabl_car_rst_set(APB, 5) ... [0009.494] I> tegrabl_car_clk_enable(5) ... [0009.498] I> tegrabl_car_rst_clear(APB, 5) ... [0009.502] I> tegrabl_set_ctrl_state(5) [0009.506] I> CLR PCIE_APB:6 [0009.509] I> tegrabl_pcie_soc_init: (5): [0009.512] I> APPL initialization ... [0009.516] I> poweron phys [0009.519] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.525] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0009.530] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0009.535] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0009.541] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0009.546] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0009.551] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0009.557] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0009.562] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0010.667] C> Failed to link up controller-5 [0010.668] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0010.668] I> Failed to initialize SoC Host PCIe controller [0010.669] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0010.669] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0010.670] W> Failed to open NVME-5, err = 80800612 [0010.674] W> Failed to initialize device 10-5 [0010.679] E> NVME (5) boot failed, err: 0x80800612 [0010.683] I> ########## Fixed storage boot ########## [0010.688] I> Loading kernel-bootctrl from partition [0010.693] I> Loading partition kernel-bootctrl at 0xa4320000 from device(0x1) [0010.706] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0010.707] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0010.720] I> Already published: 00010003 [0010.720] I> Look for boot partition [0010.721] I> Fallback: assuming 0th partition is boot partition [0010.727] I> Set 0th partition is boot partition [0010.731] I> Detect filesystem [0010.758] I> Loading extlinux.conf ... [0010.759] I> Loading extlinux.conf binary from rootfs ... [0010.759] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0010.802] I> Loading extlinux.conf sig file from rootfs ... [0010.802] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0010.833] I> Validate extlinux.conf ... [0010.833] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0010.834] I> Encryption fuse is not ON [0010.834] I> L4T boot options [0010.834] I> [1]: "primary kernel" [0010.835] I> Enter choice: [0013.836] I> Continuing with default option: 1 [0013.836] I> Loading kernel ... [0013.836] I> Loading kernel binary from rootfs ... [0013.837] I> rootfs path: /sdmmc_user/boot/Image [0014.064] I> Loading kernel sig file from rootfs ... [0014.064] I> rootfs path: /sdmmc_user/boot/Image.sig [0014.089] I> overload load_size to 34484232 (from 34484240) [0014.089] I> Validate kernel ... [0014.089] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0014.403] I> Encryption fuse is not ON [0014.420] I> Loading kernel-dtb ... [0014.420] I> No kernel-dtb binary path [0014.420] I> Continue to load from partition ... [0014.421] I> A/B: bin_type (38) slot 0 [0014.421] I> Loading kernel-dtb from partition [0014.421] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0014.430] I> Validate kernel-dtb ... [0014.431] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0014.434] I> Encryption fuse is not ON [0014.436] I> Loading ramdisk from rootfs ... [0014.439] I> Loading ramdisk binary from rootfs ... [0014.443] I> rootfs path: /sdmmc_user/boot/initrd [0014.518] I> Loading ramdisk sig file from rootfs ... [0014.519] I> rootfs path: /sdmmc_user/boot/initrd.sig [0014.543] I> overload load_size to 7238344 (from 7238352) [0014.544] I> Validate ramdisk ... [0014.544] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0014.610] I> Encryption fuse is not ON [0014.619] I> Kernel hdr @0xa4320000 [0014.619] I> Kernel dtb @0x90000000 [0014.619] I> decompressor handler not found [0014.620] I> Copying kernel image (34484232 bytes) from 0xa4320000 to 0x80080000 ... [0014.626] I> Done [0014.627] I> Updated bpmp info to DTB [0014.628] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0014.628] I> Updated initrd info to DTB [0014.629] W> WARN: Fail to override "console=none" in commandline [0014.632] I> Active rootfs suffix: [0014.635] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0014.642] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0014.650] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0014.657] I> Active slot suffix: [0014.660] I> add_boot_slot_suffix: slot_suffix = [0014.665] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0014.689] I> Updated bootarg info to DTB [0014.693] W> MAC addr invalid! [0014.696] E> Failed to get WIFI MAC address [0014.700] W> MAC addr invalid! [0014.703] E> Failed to get Bluetooth MAC address [0014.707] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3a:9e:cc [0014.714] W> "plugin-manager" doesn't exist, creating [0014.718] I> Adding /chosen/plugin-manager/cvm [0014.722] W> "chip-id" doesn't exist, creating [0014.727] I> Adding /chosen/plugin-manager/chip-id [0014.731] W> "configs" doesn't exist, creating [0014.736] I> Adding /chosen/plugin-manager/configs [0014.740] W> "ids" doesn't exist, creating [0014.744] I> Adding /chosen/plugin-manager/ids [0014.749] W> "odm-data" doesn't exist, creating [0014.753] I> Adding /chosen/plugin-manager/odm-data [0014.760] W> "memory" doesn't exist, creating [0014.762] I> [0] START: 0x80000000, END: 0xac000000 [0014.766] I> [1] START: 0xac004000, END: 0xf0ad0000 [0014.771] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0014.776] I> dram_block larger than 80000000 [0014.780] I> [3] START: 0x100000000, END: 0x480000000 [0014.785] I> added [base:0x80000000, size:0x2c000000] to /memory [0014.791] I> added [base:0xac200000, size:0x44800000] to /memory [0014.797] I> added [base:0x100000000, size:0x380000000] to /memory [0014.804] I> Updated memory info to DTB [0014.807] E> add_disp_param: failed to get display params for du=0 [0014.813] W> "reset" doesn't exist, creating [0014.817] I> Adding ecid(00000001640171470000000012fd8240) to DT [0014.823] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0014.827] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0014.832] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0014.837] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0014.841] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0014.846] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0014.851] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0014.855] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0014.861] W> "misc-data" doesn't exist, creating [0014.865] I> Boot-device: eMMC [0014.867] I> Add boot-sdmmc to plugin-manager/misc-data [0014.873] I> Add storage-sdmmc to plugin-manager/misc-data [0014.878] W> Unknown storage device [0014.882] I> Add serial number:1560921006917 as DT property [0014.888] I> Plugin-manager override starting [0014.891] I> node /plugin-manager/fragement-tegra-wdt-en matches [0014.898] I> node /plugin-manager/fragement-soft-wdt matches [0014.905] I> node /plugin-manager/fragment-pcie-c5-rp matches [0014.910] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0014.921] I> Disable plugin-manager status in FDT [0014.922] I> Plugin-manager override finished successfully [0014.924] I> tegrabl_load_kernel_and_dtb: Done [0014.928] E> tegrabl_display_clear: display is not initialized [0014.934] W> Boot logo display failed... [0014.938] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 2.443262] rt5659 7-001a: Device with ID register ffffff80 is not rt5659 [ 2.471197] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 2.471387] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 2.904099] ucsi_ccg 1-0008: failed to reset PPM! [ 2.904241] ucsi_ccg 1-0008: PPM init failed (-110) [ 4.767367] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.767528] tegradc 15210000.nvdisplay: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 ÿâWARNING: pll_d has no dyn ramp WARNING: pll_d has no dyn ramp ÿá[ 4.782445] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.782624] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.787961] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.788130] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.793436] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.793578] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.798897] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.799065] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.799244] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 4.816163] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 4.816313] tegradc 15220000.nvdisplay: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 [ 4.830568] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 4.830733] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.835701] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 4.835842] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.841173] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 4.841181] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.841223] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.841533] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.844135] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.844171] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.866816] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 4.868753] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.877591] tegradc 15220000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 4.888385] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.893030] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.913294] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.913457] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.920585] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.922741] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.936731] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.938920] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.944039] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 4.944043] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 4.944045] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 4.944051] hpd: edid read prepare failed [ 5.001241] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 5.001391] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 5.006641] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 5.006794] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 5.014199] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 5.016116] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 5.030651] tegradc 15220000.nvdisplay: dp: aux write got error (0x10000100) [ 5.032585] tegradc 15220000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 5.041654] tegradc 15220000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 5.049875] hpd: edid read prepare failed[ 5.062164] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.062347] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.071820] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.074226] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.082082] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.086750] tegra-asoc: sound: snd_soc_register_card failed (-517) ÿâWARNING: pll_d2 has no dyn ramp WARNING: pll_d2 has no dyn ramp ÿá[ 5.703919] cgroup: cgroup2: unknown option "nsdelegate" [ 6.086186] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 6.086370] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 6.775665] using random self ethernet address [ 6.775790] using random host ethernet address [ 6.936577] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 6.936750] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 6.942183] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 6.942378] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 6.944742] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 6.944949] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 6.947356] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 6.947539] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 7.124473] random: crng init done [ 7.124582] random: 7 urandom warning(s) missed due to ratelimiting [ 7.190758] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 7.190962] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 7.264801] using random self ethernet address [ 7.264933] using random host ethernet address [ 7.721113] CPU4: shutdown [ 7.801603] CPU5: shutdown [ 7.857083] CPU6: shutdown [ 7.901550] CPU7: shutdown [ 7.957383] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 7.957599] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 9.578592] Bridge firewalling registered Ubuntu 18.04.5 LTS rwra-desktop ttyTCU0 rwra-desktop login: rwra Password: Last login: Wed Jul 21 14:53:21 EDT 2021 on ttyTCU0 Welcome to Ubuntu 18.04.5 LTS (GNU/Linux 4.9.253-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 21 updates can be applied immediately. 15 of these updates are standard security updates. To see these additional updates run: apt list --upgradable rwra@rwra-desktop:~$ cd deskt/home/rwra/deslktDeslktop/ rwra@rwra-desktop:~/Desktop$ ls chromium-browser.desktop nv_devzone.desktop nv_jetson_zoo.desktop gnome-terminal.desktop nv_forums.desktop nv_l4t_readme.desktop lxterminal.desktop nv_jetson_projects.desktop rwra@rwra-desktop:~/Desktop$ ls -a . lxterminal.desktop nv_jetson_zoo.desktop .. nv_devzone.desktop nv_l4t_readme.desktop chromium-browser.desktop nv_forums.desktop gnome-terminal.desktop nv_jetson_projects.desktop rwra@rwra-desktop:~/Desktop$