Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB3, 21:03:24 Press CTRL-A Z for help on special keys �� [0087.641] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet lev. [0087.649] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39) [0087.655] I> Boot-mode: RCM [0087.657] I> Chip revision : A02P [0087.660] I> Bootrom patch version : 15 (correctly patched) [0087.666] I> ATE fuse revision : 0x200 [0087.669] I> Ram repair fuse : 0x0 [0087.672] I> Ram Code : 0x2 [0087.675] I> rst_source : 0x0 [0087.677] I> rst_level : 0x0 [0087.681] I> USB configuration success [0092.499] I> bct_bootrom image downloaded [0092.507] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0092.515] I> Temperature = 24500 [0092.518] W> Skipping boost for clk: BPMP_CPU_NIC [0092.522] W> Skipping boost for clk: BPMP_APB [0092.526] W> Skipping boost for clk: AXI_CBB [0092.530] W> Skipping boost for clk: AON_CPU_NIC [0092.535] W> Skipping boost for clk: CAN1 [0092.538] W> Skipping boost for clk: CAN2 [0092.543] I> Boot-device: eMMC [0092.545] I> Boot-device: eMMC [0092.548] I> bct_mb1 image downloaded [0092.559] I> ECC region[0]: Start:0x0, End:0x0 [0092.563] I> ECC region[1]: Start:0x0, End:0x0 [0092.567] I> ECC region[2]: Start:0x0, End:0x0 [0092.571] I> ECC region[3]: Start:0x0, End:0x0 [0092.575] I> ECC region[4]: Start:0x0, End:0x0 [0092.579] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0092.585] I> Non-ECC region[1]: Start:0x0, End:0x0 [0092.590] I> Non-ECC region[2]: Start:0x0, End:0x0 [0092.594] I> Non-ECC region[3]: Start:0x0, End:0x0 [0092.598] I> Non-ECC region[4]: Start:0x0, End:0x0 [0092.605] E> FAILED: Thermal config [0092.612] E> FAILED: MEMIO rail config [0092.630] I> bct_mem image downloaded [0095.418] I> blob image downloaded [0096.849] I> Recovery boot mode 0 [0096.918] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0096.927] I> Welcome to MB2(TBoot-BPMP) Recovery (version: 00.00.2018.32-mob) [0096.928] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0096.929] I> Default Heap @ [0xd486400 - 0xd48a400] [0096.930] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0096.936] W> device prod register failed [0096.940] I> parsing oem signed section of bpmp-fw header done [0096.948] I> bpmp-fw binary copied from blob [0096.950] I> oem authentication of bpmp-fw header done [0096.955] I> bpmp-fw: Authentication init Done [0096.959] I> parsing oem signed section of cpubl header done [0096.965] I> cpubl binary copied from blob [0096.968] I> bpmp-fw: Authentication Finalize Done [0096.973] I> oem authentication of cpubl header done [0096.978] I> cpubl: Authentication init Done [0096.982] I> parsing oem signed section of tos header done [0096.988] I> tos binary copied from blob [0096.991] I> Relocating BR-BCT [0096.994] I> cpubl: Authentication Finalize Done [0096.999] I> oem authentication of tos header done [0097.003] I> tos: Authentication init Done [0097.007] I> parsing oem signed section of bpmp-fw-dtb header done [0097.015] I> bpmp-fw-dtb binary copied from blob [0097.017] I> tos: Authentication Finalize Done [0097.024] I> oem authentication of bpmp-fw-dtb header done [0097.027] I> bpmp-fw-dtb: Authentication init Done [0097.032] I> parsing oem signed section of cpubl-dtb header done [0097.038] I> cpubl-dtb binary copied from blob [0097.042] I> bpmp-fw-dtb: Authentication Finalize Done [0097.229] I> oem authentication of cpubl-dtb header done [0097.229] I> cpubl-dtb: Authentication init Done [0097.230] I> parsing oem signed section of eks header done [0097.230] I> eks binary copied from blob [0097.231] I> cpubl-dtb: Authentication Finalize Done [0097.232] I> oem authentication of eks header done [0097.232] I> eks: Authentication init Done [0097.236] I> eks: Authentication Finalize Done [0097.240] I> EKB detected (length: 0x410) @ VA:0x526fb600 ��NOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:38:54, Feb 19 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized /uphy is not enabled status = disabled uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0097.736] I> Welcome to TBoot-CPU Recovery ��fmon_post initialized ��[0097.736] I> Heap: [0xa4000000 ... 0xaa000000 [0097.741] I> gpio framework initialized [0097.752] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' dri) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized �� [0097.833] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon'r [0097.835] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0097.846] W> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0097.854] W> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0097.857] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0097.863] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 ��emc_debugfs initialized dvs_debugfs initialized ��[0097.874] W> fetch_driver_phandle_from_dt: failed to get node with compatibld vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] �� [0097.932] W> fetch_driver_phandle_from_dt: failed to get node with compatible 9 [0097.935] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0097.946] I> fixed regulator driver initialized [0097.974] I> CPU: Nvidia Carmel [0097.975] I> CPU: MIDR: 0x4e0f0040, MPIDR: 0x80000000 [0097.975] I> chip revision : A02P [0097.975] I> Boot-device: eMMC [0097.976] I> Boot_device: SDMMC_BOOT instance: 3 [0098.460] I> sdmmc-3 params source = boot args [0098.460] I> sdmmc bdev is already initialized [0098.461] I> sdmmc-3 params source = boot args [0098.487] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0098.500] I> Found 42 partitions in SDMMC_USER (instance 3) [0098.500] I> Recovery boot_type: 0 [0098.501] I> Entering 3p server [0098.501] I> USB configuration success