=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.09.03 08:56:20 =~=~=~=~=~=~=~=~=~=~=~= [0000.200] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c700205d) [0000.209] I> bit @ 0xd480000 [0000.212] I> Boot-device: eMMC [0000.219] I> sdmmc bdev is already initialized [0000.224] I> pmic: reset reason (nverc): 0x50 [0000.255] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.274] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.280] W> No valid slot number is found in scratch register [0000.286] W> Return default slot: _a [0000.289] I> A/B: bin_type (16) slot 0 [0000.293] I> Loading partition bpmp-fw at 0xd7800000 [0000.298] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.303] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.328] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.334] W> No valid slot number is found in scratch register [0000.339] W> Return default slot: _a [0000.343] I> A/B: bin_type (17) slot 0 [0000.346] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.352] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.357] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.383] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.613] I> Loading SCE-FW ... [0000.616] W> No valid slot number is found in scratch register [0000.622] W> Return default slot: _a [0000.625] I> A/B: bin_type (12) slot 0 [0000.629] I> Loading partition sce-fw at 0xd7300000 [0000.634] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.639] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.658] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.664] I> Init SCE [0000.666] I> Loading APE-FW ... [0000.669] W> No valid slot number is found in scratch register [0000.675] W> Return default slot: _a [0000.679] I> A/B: bin_type (11) slot 0 [0000.682] I> Loading partition adsp-fw at 0xd7400000 [0000.687] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.692] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.711] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.718] I> Copy BTCM section [0000.720] W> No valid slot number is found in scratch register [0000.726] W> Return default slot: _a [0000.730] I> A/B: bin_type (13) slot 0 [0000.733] I> Loading partition cpu-bootloader at 0x96000000 [0000.739] I> Reading two headers - addr:0x96000000 blocks:1 [0000.744] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.765] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.771] W> No valid slot number is found in scratch register [0000.777] W> Return default slot: _a [0000.780] I> A/B: bin_type (20) slot 0 [0000.784] I> Loading partition bootloader-dtb at 0x8520f400 [0000.789] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.795] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.817] I> Binary(20) of size 371424 is loaded @ 0x8520f400 [0000.823] W> No valid slot number is found in scratch register [0000.828] W> Return default slot: _a [0000.832] I> A/B: bin_type (14) slot 0 [0000.835] I> Loading partition secure-os at 0x8530f600 [0000.840] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.846] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.868] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.876] I> TOS boot-params @ 0x85000000 [0000.880] I> TOS params prepared [0000.883] I> Loading EKS ... [0000.885] I> A/B: bin_type (15) slot 0 [0000.889] I> Loading partition eks at 0x8590f800 [0000.894] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.899] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.918] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.923] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.928] I> Copied encrypted keys [0000.932] I> boot profiler @ 0x275844000 [0000.936] I> boot profiler for TOS @ 0x275844000 [0000.941] I> Unhalting SCE [0000.943] I> Primary Memory Start:80000000 Size:70000000 [0000.949] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.955] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.328] I> Welcome to Cboot [0001.331] I> Cboot Version: t186-02737b3e [0001.334] I> CPU-BL Params @ 0x275800000 [0001.338] I> 0) Base:0x00000000 Size:0x00000000 [0001.343] I> 1) Base:0x277f00000 Size:0x00100000 [0001.347] I> 2) Base:0x277e00000 Size:0x00100000 [0001.352] I> 3) Base:0x277d00000 Size:0x00100000 [0001.356] I> 4) Base:0x277c00000 Size:0x00100000 [0001.361] I> 5) Base:0x277b00000 Size:0x00100000 [0001.365] I> 6) Base:0x277800000 Size:0x00200000 [0001.370] I> 7) Base:0x277400000 Size:0x00400000 [0001.374] I> 8) Base:0x277a00000 Size:0x00100000 [0001.379] I> 9) Base:0x277300000 Size:0x00100000 [0001.383] I> 10) Base:0x276800000 Size:0x00800000 [0001.388] I> 11) Base:0x30000000 Size:0x00040000 [0001.392] I> 12) Base:0xf0000000 Size:0x00100000 [0001.397] I> 13) Base:0x30040000 Size:0x00001000 [0001.401] I> 14) Base:0x30048000 Size:0x00001000 [0001.406] I> 15) Base:0x30049000 Size:0x00001000 [0001.410] I> 16) Base:0x3004a000 Size:0x00001000 [0001.414] I> 17) Base:0x3004b000 Size:0x00001000 [0001.419] I> 18) Base:0x3004c000 Size:0x00001000 [0001.423] I> 19) Base:0x3004d000 Size:0x00001000 [0001.428] I> 20) Base:0x3004e000 Size:0x00001000 [0001.432] I> 21) Base:0x3004f000 Size:0x00001000 [0001.437] I> 22) Base:0x00000000 Size:0x00000000 [0001.441] I> 23) Base:0xf0100000 Size:0x00010000 [0001.445] I> 24) Base:0x00000000 Size:0x00000000 [0001.450] I> 25) Base:0x00000000 Size:0x00000000 [0001.454] I> 26) Base:0x00000000 Size:0x00000000 [0001.459] I> 27) Base:0x00000000 Size:0x00000000 [0001.463] I> 28) Base:0x84400000 Size:0x00400000 [0001.468] I> 29) Base:0x30000000 Size:0x00010000 [0001.472] I> 30) Base:0x278000000 Size:0x08000000 [0001.476] I> 31) Base:0x00000000 Size:0x00000000 [0001.481] I> 32) Base:0x276000000 Size:0x00600000 [0001.485] I> 33) Base:0x80000000 Size:0x70000000 [0001.490] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.494] I> 35) Base:0x00000000 Size:0x00000000 [0001.499] I> 36) Base:0x00000000 Size:0x00000000 [0001.503] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.508] I> 38) Base:0x84000000 Size:0x00400000 [0001.512] I> 39) Base:0x96000000 Size:0x02000000 [0001.517] I> 40) Base:0x85000000 Size:0x01200000 [0001.521] I> 41) Base:0x275800000 Size:0x00500000 [0001.526] I> 42) Base:0x00000000 Size:0x00000000 [0001.530] I> 43) Base:0x00000000 Size:0x00000000 [0001.534] GIC-SPI Target CPU: 4 [0001.538] Interrupts Init done [0001.541] calling constructors [0001.544] initializing heap [0001.547] initializing threads [0001.550] initializing timers [0001.553] creating bootstrap completion thread [0001.558] top of bootstrap2() [0001.561] CPU: ARM Cortex A57 [0001.564] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.569] initializing platform [0001.572] I> Bl_dtb @0x8520f400 [0001.575] I> gpio framework initialized [0001.582] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.592] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.600] I> GPIO framework and drivers are initialized. [0001.605] I> Boot-device: eMMC [0001.612] I> sdmmc bdev is already initialized [0001.642] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.660] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.665] W> opt-in fuse is not set, skip fuse_burning [0001.670] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.676] W> No valid slot number is found in scratch register [0001.682] W> Return default slot: _a [0001.685] I> A/B: bin_type (21) slot 0 [0001.689] I> Loading kernel-dtb from partition [0001.693] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.710] I> Kernel_dtb @0x80000000 [0001.713] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.724] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.731] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.740] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.750] I> fixed regulator driver initialized [0001.783] I> register 'maxim' power off handle [0001.789] I> virtual i2c enabled [0001.792] I> registered 'maxim,max77620' pmic [0001.797] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.810] I> Find /i2c@c250000's alias i2c7 [0001.814] I> Reading eeprom i2c=7 address=0x50 [0001.843] I> Device at /i2c@c250000:0x50 [0001.847] I> Reading eeprom i2c=7 address=0x57 [0001.876] I> Device at /i2c@c250000:0x57 [0001.880] I> Find /i2c@c240000's alias i2c1 [0001.884] I> Reading eeprom i2c=1 address=0x51 [0001.889] E> I2C: slave not found in slaves. [0001.893] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.901] E> I2C_DEV: Failed to send register address 0x00000000. [0001.907] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.916] E> eeprom: Retry to read I2C slave device. [0001.921] E> I2C: slave not found in slaves. [0001.925] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.933] E> I2C_DEV: Failed to send register address 0x00000000. [0001.939] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.948] E> eeprom: Failed to read I2C slave device [0001.953] I> Eeprom read failed 0x3526070d [0001.958] I> Find /i2c@3160000's alias i2c0 [0001.962] I> Reading eeprom i2c=0 address=0x50 [0001.966] E> I2C: slave not found in slaves. [0001.970] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.978] E> I2C_DEV: Failed to send register address 0x00000000. [0001.984] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.993] E> eeprom: Failed to read I2C slave device [0001.998] I> Eeprom read failed 0x3526070d [0002.003] I> Find /i2c@3180000's alias i2c2 [0002.007] I> Reading eeprom i2c=2 address=0x54 [0002.011] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.017] E> I2C: slave not found in slaves. [0002.021] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0002.029] E> I2C_DEV: Failed to send register address 0x00000000. [0002.035] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0002.045] E> eeprom: Failed to read I2C slave device [0002.049] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.055] I> Eeprom read failed 0x00000000 [0002.058] I> Reading eeprom i2c=2 address=0x57 [0002.063] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.068] E> I2C: slave not found in slaves. [0002.072] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.080] E> I2C_DEV: Failed to send register address 0x00000000. [0002.086] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.096] E> eeprom: Failed to read I2C slave device [0002.100] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.106] I> Eeprom read failed 0x00000000 [0002.109] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.115] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.125] I> create_pm_ids: id: 2597-0000-302-E, len: 15 [0002.131] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.166] I> enabling 'vdd-hdmi' regulator [0002.181] I> regulator 'vdd-hdmi' already enabled [0002.186] I> hdmi cable connected [0002.195] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.206] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.215] E> cannot find any other nvdisp nodes [0002.224] E> I2C: slave not found in slaves. [0002.228] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.236] E> I2C_DEV: Failed to send register address 0x00000000. [0002.242] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 at 0x00000000 via instance 3. [0002.251] E> could not read edid [0002.258] I> hdmi_enable, starting HDMI initialisation [0002.266] I> hdmi_enable, HDMI initialisation complete [0002.279] initializing target [0002.282] calling apps_init() [0002.285] starting app kernel_boot_app [0002.308] I> found decompressor handler: lz4-legacy [0002.312] I> decompressing BMP blob ... [0002.322] I> Kernel type = Normal [0002.326] I> Loading kernel-bootctrl from partition [0002.330] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.345] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.352] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.359] I> ########## Fixed storage boot ########## [0002.364] W> No valid slot number is found in scratch register [0002.369] W> Return default slot: _a [0002.373] I> A/B: bin_type (24) slot 0 [0002.388] I> Boot image size read from image header: 74aba [0002.394] I> Boot image load address: 0x80400000 [0002.398] I> Loading kernel from partition [0002.402] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.362] I> Validate kernel ... [0003.365] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.372] I> kernel-dtb is already loaded [0003.376] I> Validate kernel-dtb ... [0003.379] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.387] I> Checking boot.img header magic ... [0003.391] I> [OK] [0003.393] I> Kernel hdr @0x80400000 [0003.396] I> Kernel dtb @0x80000000 [0003.400] I> decompressor handler not found [0003.404] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80600000 ... [0003.411] I> Done [0003.413] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000 [0003.420] I> Updated bpmp info to DTB [0003.426] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.431] I> Updated initrd info to DTB [0003.434] W> WARN: Fail to override "console=none" in commandline [0003.440] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.447] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.455] I> disabled_core_mask: 0xffffff0c [0003.459] W> No valid slot number is found in scratch register [0003.464] W> Return default slot: _a [0003.468] I> Active slot suffix: [0003.471] I> add_boot_slot_suffix: slot_suffix = [0003.475] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.525] I> Updated bootarg info to DTB [0003.529] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:8a:1a [0003.535] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:8a:1b [0003.542] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:8a:1c [0003.548] E> Found no plugin manager ids in source DT [0003.553] W> Add plugin manager ids from board info [0003.557] W> "plugin-manager" doesn't exist, creating [0003.562] W> "ids" doesn't exist, creating [0003.566] W> "connection" doesn't exist, creating [0003.571] W> "configs" doesn't exist, creating [0003.575] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0003.580] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.591] I> create_pm_ids: id: 2597-0000-302-E, len: 15 [0003.596] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.607] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0003.615] W> "i2c@c250000" doesn't exist, creating [0003.619] W> "module@0x50" doesn't exist, creating [0003.624] I> Adding plugin-manager/ids/2597-0000-302=/i2c@c250000:module@0x57 [0003.631] W> "module@0x57" doesn't exist, creating [0003.638] I> Adding plugin-manager/ids/3310-1000-D01-B [0003.645] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.651] I> Adding plugin-manager/configs/3310-power-config 00 [0003.657] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.663] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.669] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.675] I> Adding plugin-manager/configs/3310-display-config 00 [0003.681] I> Adding plugin-manager/cvm [0003.685] W> "chip-id" doesn't exist, creating [0003.689] I> Adding plugin-manager/chip-id/A02P [0003.694] W> "odm-data" doesn't exist, creating [0003.698] I> Adding /chosen/plugin-manager/odm-data [0003.708] I> added [base:0x80000000, size:0x70000000] to /memory [0003.714] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.720] I> added [base:0x275e00000, size:0x200000] to /memory [0003.726] I> added [base:0x276600000, size:0x200000] to /memory [0003.731] I> added [base:0x277000000, size:0x200000] to /memory [0003.737] I> Updated memory info to DTB [0003.742] E> add_disp_param: failed to get display params for du=1 [0003.749] W> "reset" doesn't exist, creating [0003.753] W> "pmc-reset-reason" doesn't exist, creating [0003.759] W> "pmic-reset-reason" doesn't exist, creating [0003.765] I> Adding ecid(00000001645102841c00000016fd0480) to DT [0003.771] I> disabled_core_mask: 0xffffff0c [0003.784] I> Add serial number:0424718090835 as DT property [0003.793] I> Plugin-manager override starting [0003.799] I> node /plugin-manager/fragement@0 matches [0003.809] I> node /plugin-manager/fragement@4 matches [0003.822] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.842] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.851] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.860] I> node /plugin-manager/fragment-devslp@0 matches [0003.872] I> node /plugin-manager/fragment-500-pcie-config matches [0003.887] I> node /plugin-manager/fragment-500-xusb-config matches [0003.910] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.923] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.934] I> node /plugin-manager/fragment-p3310-c01 matches [0003.947] I> node /plugin-manager/fragment-p3310-c03 matches [0003.985] I> node /plugin-manager/fragment-p3310-c00-camera matches [0004.012] I> Disable plugin-manager status in FDT [0004.017] I> Plugin-manager override finished successfully [0004.022] I> tegrabl_load_kernel_and_dtb: Done [0004.067] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-ge6da093be3 (Jun 25 2020 - 21:14:32 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 909 bytes read in 151 ms (5.9 KiB/s) 1:primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 236 ms (22.5 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 861 ms (38 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 Retrieving file: /boot/tegra186-quill-p3310-1000-c03-00-base.dtb 371412 bytes read in 126 ms (2.8 MiB/s) ## Flattened Device Tree blob at 88400000 Booting using the fdt blob at 0x88400000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000088400000, end 000000008845dad3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.447402] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9631a800, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447452] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x963216c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447494] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96326dc0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447532] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9632b740, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447570] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96330900, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447607] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96335c00, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447644] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96339f80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447682] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9633ee40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447719] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96343c00, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447756] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x963484c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.458141] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 0.458160] mc-err: status = 0x20327092; addr = 0x3ffffffc0 [ 0.458171] mc-err: secure: yes, access-type: read [ 0.458188] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.458210] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.458234] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.458255] mc-err: Too many MC errors; throttling prints [ 5.448706] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x961429c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448759] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9614ab80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448804] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x961508c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448848] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x961564c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448892] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9615bc40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448936] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96161840, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448980] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96166b80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.449023] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9616c9c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.449066] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96171740, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.449109] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96177640, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 8.600427] irq 66: nobody cared (try booting with the "irqpoll" option) [ 8.600544] handlers: [ 8.600561] [] tegra_mcerr_hard_irq threaded [] tegra_mcerr_thread [ 8.600586] Disabling IRQ #66 [ 10.456370] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9628fa80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456433] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96298480, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456480] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9629ed40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456526] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962a4c40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456570] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962aa340, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456615] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962b00c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456659] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962b5680, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456703] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962bb840, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456747] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962c0e00, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456790] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962c6140, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 12.880366] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 12.886985] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 12.952341] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 12.958886] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 13.016343] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.022886] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 13.030880] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 13.179563] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 13.252362] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.252365] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 13.304337] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.304339] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 13.356340] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.356343] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 13.408349] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.408352] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 13.408354] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 13.825441] cgroup: cgroup2: unknown option "nsdelegate" [ 14.861305] using random self ethernet address [ 14.878779] using random host ethernet address [ 15.489422] using random self ethernet address [ 15.494373] using random host ethernet address [ 15.878058] CPU1: shutdown [ 15.946767] CPU2: shutdown [ 17.224347] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.224351] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.276346] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.276349] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.328366] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.328369] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 17.380357] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.380360] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 17.380362] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 17.508385] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.508388] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.560360] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.560363] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.612356] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.612359] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 17.664354] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.664358] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 17.664360] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 18.124089] vdd-1v8: voltage operation not allowed [ 18.129035] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.156591] vdd-1v8: voltage operation not allowed [ 18.161455] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.189392] vdd-1v8: voltage operation not allowed [ 18.194235] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.203432] vdd-1v8: voltage operation not allowed [ 18.208519] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.315152] vdd-1v8: voltage operation not allowed [ 18.320021] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.328538] vdd-1v8: voltage operation not allowed [ 18.333428] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.341709] vdd-1v8: voltage operation not allowed [ 18.346580] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.4 LTS nvidia-desktop ttyS0 nvidia-desktop login: nv[ 20.976349] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 20.976352] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.029560] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.029563] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.082143] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.082146] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 21.132371] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.132374] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 21.132377] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable i[ 21.248348] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.248351] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.300357] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.300360] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop d[ 21.352383] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.352389] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 21.404370] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.404374] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 21.404376] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable ia Password: Last login: Tue Sep 1 16:03:40 EDT 2020 on ttyS0 Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 220 packages can be updated. 156 updates are security updates. nvidia@nvidia-desktop:~$ nvidia@nvidia-desktop:~$ nvidia@nvidia-desktop:~$ nvidia@nvidia-desktop:~$ ls 123.txt boot_sigheader.img.encrypt Desktop Documents Downloads examples.desktop Music Pictures Public tegra186-quill-p3310-1000-c03-00-base.dtb.sb tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt Templates Videos nvidia@nvidia-desktop:~$ cd /boot/ nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ ls dtb extlinux grub Image initrd initrd.img initrd.img-4.9.140-tegra tegra186-quill-p3310-1000-a00-00-base.dtb tegra186-quill-p3310-1000-as-0888.dtb tegra186-quill-p3310-1000-c03-00-base-adafruit-sph0645lm4h.dtbo tegra186-quill-p3310-1000-c03-00-base.dtb tegra186-quill-p3310-1000-c03-00-base.dtb.sb tegra186-quill-p3310-1000-c03-00-base-fe-pi-audio-z-v2.dtbo tegra186-quill-p3310-1000-c03-00-base-hdr40.dtbo tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt tegra186-quill-p3310-1000-c03-00-dsi-hdmi-dp.dtb tegra186-quill-p3489-0888-a00-00-base.dtb tegra186-quill-p3489-1000-a00-00-ucm1.dtb tegra186-quill-p3489-1000-a00-00-ucm2.dtb tegra194-p2888-0001-p2822-0000-adafruit-sph0645lm4h.dtbo tegra194-p2888-0001-p2822-0000.dtb tegra194-p2888-0001-p2822-0000-fe-pi-audio-z-v2.dtbo tegra194-p2888-0001-p2822-0000-hdr40.dtbo tegra194-p2888-0001-p2822-0000-maxn.dtb tegra194-p3668-all-p3509-0000-adafruit-sph0645lm4h.dtbo tegra194-p3668-all-p3509-0000-fe-pi-audio-z-v2.dtbo tegra194-p3668-all-p3509-0000-hdr40.dtbo nvidia@nvidia-desktop:/boot$ cat extlinux/extlinux.conf TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primary MENU LABEL primary kernel LINUX /boot/Image INITRD /boot/initrd FDT /boot/tegra186-quill-p3310-1000-c03-00-base.dtb APPEND ${cbootargs} quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 # When testing a custom kernel, it is recommended that you create a backup of # the original kernel and add a new entry to this file so that the device can # fallback to the original kernel. To do this: # # 1, Make a backup of the original kernel # sudo cp /boot/Image /boot/Image.backup # # 2, Copy your custom kernel into /boot/Image # # 3, Uncomment below menu setting lines for the original kernel # # 4, Reboot # LABEL backup # MENU LABEL backup kernel # LINUX /boot/Image.backup # INITRD /boot/initrd # APPEND ${cbootargs} nvidia@nvidia-desktop:/boot$ dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29040(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7960636K/8220672K available (15294K kernel code, 2934K rwdata, 6640K rodata, 8576K init, 609K bss, 194500K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001602] Console: colour dummy device 80x25 [ 0.001607] console [tty0] enabled [ 0.001610] bootconsole [uart8250] disabled [ 0.001617] kmemleak: Kernel memory leak detector disabled [ 0.001627] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001634] pid_max: default: 32768 minimum: 301 [ 0.001941] Security Framework initialized [ 0.002094] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002098] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002708] ftrace: allocating 47104 entries in 185 pages [ 0.126034] sched-energy: Sched-energy-costs installed from DT [ 0.126044] ASID allocator initialised with 65536 entries [ 0.164263] tegra-id: chipid=21817. [ 0.164269] tegra-id: opt_subrevision=1. [ 0.164286] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.164294] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.164299] DTB Build time: Jun 25 2020 21:28:02 [ 0.213666] CPU1: Booted secondary processor [4e0f0030] [ 0.245312] CPU2: Booted secondary processor [4e0f0030] [ 0.277096] CPU3: Booted secondary processor [411fd073] [ 0.309077] CPU4: Booted secondary processor [411fd073] [ 0.341076] CPU5: Booted secondary processor [411fd073] [ 0.341127] Brought up 6 CPUs [ 0.341131] SMP: Total of 6 processors activated. [ 0.341136] CPU features: detected feature: 32-bit EL0 Support [ 0.341798] CPU: All CPU(s) started at EL2 [ 0.341848] alternatives: patching kernel code [ 0.344732] devtmpfs: initialized [ 0.384154] Initilizing CustomIPI irq domain [ 0.384349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.384358] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.385277] pinctrl core: initialized pinctrl subsystem [ 0.385486] OS set in device tree is not L4T. [ 0.385634] regulator-dummy: no parameters [ 0.385767] Initializing plugin-manager [ 0.385819] Plugin module not found [ 0.386226] node /plugin-manager/fragement@0 match with odm-data enable-denver-wdt [ 0.386945] node /plugin-manager/fragement@4 match with odm-data enable-denver-wdt [ 0.388119] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board >=3310-1000-300 [ 0.388461] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board >=3310-1000-300 [ 0.388705] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board >=3310-1000-800 [ 0.388914] node /plugin-manager/fragment-devslp@0 match with board >=3310-1000-200 [ 0.389348] node /plugin-manager/fragment-500-pcie-config match with board >=3310-1000-500 [ 0.389793] node /plugin-manager/fragment-500-xusb-config match with board >=3310-1000-500 [ 0.390088] node /plugin-manager/fragment-500-e3325-pcie match with board >=3310-1000-500 [ 0.390457] node /plugin-manager/fragment-p3310-c00-comm match with board >=3310-1000-800 [ 0.390695] node /plugin-manager/fragment-p3310-c00-pmic match with board >=3310-1000-800 [ 0.390906] node /plugin-manager/fragment-p3310-c01 match with board >=3310-1000-900 [ 0.391154] node /plugin-manager/fragment-p3310-c03 match with board >=3310-1000-B00 [ 0.393307] node /plugin-manager/fragment-p3310-c00-camera match with board >=3310-1000-800 [ 0.396426] NET: Registered protocol family 16 [ 0.397235] pstore: using zlib compression [ 0.397250] console [pstore-1] enabled [ 0.397253] pstore: Registered ramoops as persistent store backend [ 0.397257] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.413104] cpuidle: using governor menu [ 0.414752] bpmp: waiting for handshake [ 0.414756] bpmp: handshake completed [ 0.414770] bpmp: synchronizing channels [ 0.414786] bpmp: channels synchronized [ 0.414789] bpmp: mail init ok [ 0.416889] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.416893] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.416898] arm-smmu 12000000.iommu: stage 1 translation [ 0.416901] arm-smmu 12000000.iommu: stage 2 translation [ 0.416903] arm-smmu 12000000.iommu: nested translation [ 0.416910] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.416916] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.416920] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.416924] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.416928] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.419203] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.419214] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.421306] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.423558] Registering BPMP clocks... [ 0.423642] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.424594] Serial: AMBA PL011 UART driver [ 0.425734] tegra_powergate_init: DONE [ 0.425741] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.425748] DTB Build time: Jun 25 2020 21:28:02 [ 0.427904] Tegra reboot handler registered. [ 0.429426] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.429495] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.429507] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.429509] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.429512] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.429658] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.429668] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.429984] iommu: Adding device 3460000.sdhci to group 0 [ 0.430664] iommu: Adding device 3400000.sdhci to group 1 [ 0.431688] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.431700] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.432133] iommu: Adding device 3160000.i2c to group 3 [ 0.432559] iommu: Adding device c240000.i2c to group 4 [ 0.432905] iommu: Adding device 3180000.i2c to group 5 [ 0.433260] iommu: Adding device 3190000.i2c to group 6 [ 0.433675] iommu: Adding device 31b0000.i2c to group 7 [ 0.434007] iommu: Adding device 31c0000.i2c to group 8 [ 0.434335] iommu: Adding device c250000.i2c to group 9 [ 0.434658] iommu: Adding device 31e0000.i2c to group 10 [ 0.436126] iommu: Adding device 3210000.spi to group 11 [ 0.436469] iommu: Adding device c260000.spi to group 12 [ 0.436797] iommu: Adding device 3240000.spi to group 13 [ 0.437514] iommu: Adding device 3100000.serial to group 14 [ 0.437852] iommu: Adding device 3110000.serial to group 15 [ 0.438179] iommu: Adding device c280000.serial to group 16 [ 0.438505] iommu: Adding device 3130000.serial to group 17 [ 0.439822] iommu: Adding device 2490000.ether_qos to group 18 [ 0.439833] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.440507] iommu: Adding device b000000.rtcpu to group 19 [ 0.442721] iommu: Adding device 13e10000.host1x to group 20 [ 0.443030] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.443342] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.443639] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.443937] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.444243] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.444560] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.444870] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.445196] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.445662] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.446295] iommu: Adding device 15700000.vi to group 30 [ 0.446645] iommu: Adding device 15600000.isp to group 31 [ 0.447100] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.447402] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9631a800, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447452] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x963216c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447494] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96326dc0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447532] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9632b740, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447570] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96330900, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447607] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96335c00, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447644] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96339f80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447682] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9633ee40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447705] iommu: Adding device 15340000.vic to group 33 [ 0.447719] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96343c00, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447756] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x963484c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.447923] iommu: Adding device 154c0000.nvenc to group 34 [ 0.448156] iommu: Adding device 15480000.nvdec to group 35 [ 0.448501] iommu: Adding device 15380000.nvjpg to group 36 [ 0.448716] iommu: Adding device 15500000.tsec to group 37 [ 0.448930] iommu: Adding device 15100000.tsecb to group 38 [ 0.449629] iommu: Adding device 15810000.se to group 39 [ 0.449846] iommu: Adding device 15820000.se to group 40 [ 0.450056] iommu: Adding device 15830000.se to group 41 [ 0.450284] iommu: Adding device 15840000.se to group 42 [ 0.450958] random: fast init done [ 0.451164] iommu: Adding device smmu_test to group 43 [ 0.451764] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c10000 [ 0.451775] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c20000 [ 0.451785] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.451795] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.451804] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c50000 [ 0.451813] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.451823] mc-err: mcerr ops are set to t18x [ 0.451966] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.453222] iommu: Adding device 3530000.xhci to group 44 [ 0.453236] arm-smmu: forcing sodev map for 3530000.xhci [ 0.453690] iommu: Adding device 3550000.xudc to group 45 [ 0.453701] arm-smmu: forcing sodev map for 3550000.xudc [ 0.454403] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.454409] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.454977] iommu: Adding device 17000000.gp10b to group 46 [ 0.458131] tegra-reset 5000000.clock: registered 193 resets. [ 0.458141] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 0.458160] mc-err: status = 0x20327092; addr = 0x3ffffffc0 [ 0.458171] mc-err: secure: yes, access-type: read [ 0.458188] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.458210] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.458234] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.458255] mc-err: Too many MC errors; throttling prints [ 0.460371] iommu: Adding device d000000.bpmp to group 47 [ 0.460579] bpmp: ping status is 0 [ 0.474854] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.509107] bpmp d000000.bpmp: probe ok [ 0.512223] iommu: Adding device 2600000.dma to group 48 [ 0.513485] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.513514] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.513543] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.513570] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.513600] GPIO line 424 (wifi-enable) hogged as output/high [ 0.513628] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.513656] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.513816] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.517526] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.517663] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.519236] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.519250] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.519587] iommu: Adding device sound to group 50 [ 0.519945] iommu: Adding device 3510000.hda to group 51 [ 0.594311] iommu: Adding device c1a0000.aon to group 52 [ 0.594727] vdd-ac-bat: 5000 mV [ 0.596334] vdd-1v8-ap: 1800 mV [ 0.658572] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.675857] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.676029] SCSI subsystem initialized [ 0.676129] libata version 3.00 loaded. [ 0.676244] usbcore: registered new interface driver usbfs [ 0.676270] usbcore: registered new interface driver hub [ 0.676310] usbcore: registered new device driver usb [ 0.710534] GPIO line 241 (touch-rails) hogged as output/high [ 0.710959] GPIO line 242 (touch-rails) hogged as output/high [ 0.711118] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.712485] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.712619] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.723879] random: crng init done [ 0.876025] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.941949] vddio-ddr: at 1125 mV [ 0.961106] avdd_dsi_csi: 1200 mV [ 0.977106] vdd-1v8: 1800 mV [ 1.013105] vdd-3v3-sys: 3300 mV [ 1.042175] spmic-ldo0: at 1800 mV [ 1.058739] spmic-ldo1: at 800 mV [ 1.077105] vddio-3v3: 3300 mV [ 1.092591] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 1.113107] vdd-rtc: at 800 mV [ 1.126068] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 1.145106] spmic-ldo6: at 1500 mV [ 1.161106] vdd-pex-1v00: 1000 mV [ 1.175886] dvdd-pex: 1000 mV [ 1.209659] GPIO line 221 (spmic_gpio_input) hogged as input [ 1.225555] GPIO line 222 (spmic_gpio_input) hogged as input [ 1.225724] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 1.225897] max77620 4-003c: max77620 probe successful [ 1.226268] media: Linux media interface: v0.10 [ 1.226295] Linux video capture interface: v2.00 [ 1.259401] pps_core: LinuxPPS API ver. 1 registered [ 1.259404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.259416] PTP clock support registered [ 1.259598] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.259878] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.259895] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.261887] trusty trusty: trusty version: Built: 21:16:26 Jun 25 2020 [ 1.261902] trusty trusty: selected api version: 3 (requested 3) [ 1.262654] Advanced Linux Sound Architecture Driver Initialized. [ 1.262954] Bluetooth: Core ver 2.22 [ 1.262977] NET: Registered protocol family 31 [ 1.262979] Bluetooth: HCI device and connection manager initialized [ 1.262986] Bluetooth: HCI socket layer initialized [ 1.262990] Bluetooth: L2CAP socket layer initialized [ 1.263003] Bluetooth: SCO socket layer initialized [ 1.263788] en-vdd-sd: 3300 mV [ 1.264499] en-vdd-cam: 1800 mV [ 1.269089] vdd-hdmi: 5000 mV [ 1.269385] vdd-usb0-5v: 5000 mV [ 1.269655] vdd-usb1-5v: 5000 mV [ 1.273095] en-vdd-ts-1v8: 1800 mV [ 1.277092] en-vdd-ts-hv-3v3: 3300 mV [ 1.277785] en-vdd-disp-3v3: 3300 mV [ 1.278442] en-mdm-pwr-3v7: 3700 mV [ 1.279123] en-vdd-disp-1v8: 1800 mV [ 1.279825] en-vdd-cam-hv-2v8: 2800 mV [ 1.280506] en-vdd-cam-1v2: 1200 mV [ 1.281194] vdd-fan: 5000 mV [ 1.281435] vdd-3v3: 3300 mV [ 1.282330] dis-vdd-1v2: 1200 mV [ 1.282584] en-vdd-vcm-2v8: 2800 mV [ 1.283271] vdd-usb2-5v: 5000 mV [ 1.283528] vdd-sys-bl: 3300 mV [ 1.284233] en-vdd-sys: 1200 mV [ 1.309295] camchar: rtcpu character device driver loaded [ 1.309816] gpio tegra-gpio wake53 for gpio=159(X:7) [ 1.342981] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 5.448697] __arm_smmu_context_fault: 221676 callbacks suppressed [ 5.448706] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x961429c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448759] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9614ab80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448804] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x961508c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448848] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x961564c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448892] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9615bc40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448936] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96161840, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.448980] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96166b80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.449023] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9616c9c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.449066] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96171740, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.449109] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96177640, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 8.600427] irq 66: nobody cared (try booting with the "irqpoll" option) [ 8.600444] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.140-tegra #1 [ 8.600446] Hardware name: quill (DT) [ 8.600449] Call trace: [ 8.600459] [] dump_backtrace+0x0/0x198 [ 8.600464] [] show_stack+0x24/0x30 [ 8.600470] [] dump_stack+0x98/0xc0 [ 8.600475] [] __report_bad_irq+0x3c/0xf8 [ 8.600480] [] note_interrupt+0x2c8/0x318 [ 8.600484] [] handle_irq_event_percpu+0x50/0x60 [ 8.600487] [] handle_irq_event+0x50/0x80 [ 8.600491] [] handle_fasteoi_irq+0xc8/0x1b8 [ 8.600494] [] generic_handle_irq+0x34/0x50 [ 8.600497] [] __handle_domain_irq+0x68/0xc0 [ 8.600501] [] gic_handle_irq+0x5c/0xb0 [ 8.600504] [] el1_irq+0xe8/0x194 [ 8.600509] [] irq_exit+0xd0/0x118 [ 8.600512] [] __handle_domain_irq+0x6c/0xc0 [ 8.600515] [] gic_handle_irq+0x5c/0xb0 [ 8.600517] [] el1_irq+0xe8/0x194 [ 8.600521] [] arch_cpu_idle+0x30/0x1b0 [ 8.600526] [] cpu_startup_entry+0x140/0x200 [ 8.600531] [] rest_init+0x84/0x90 [ 8.600538] [] start_kernel+0x370/0x384 [ 8.600542] [] __primary_switched+0x80/0x94 [ 8.600544] handlers: [ 8.600561] [] tegra_mcerr_hard_irq threaded [] tegra_mcerr_thread [ 8.600586] Disabling IRQ #66 [ 8.616356] clocksource: Switched to clocksource arch_sys_counter [ 8.638446] VFS: Disk quotas dquot_6.6.0 [ 8.638519] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 8.638768] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.639276] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 8.639282] nvmap_page_pool_init: Total RAM pages: 2006543 [ 8.639285] nvmap_page_pool_init: nvmap page pool size: 250817 pages (979 MB) [ 8.639351] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.652738] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 8.660530] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 8.660738] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 8.661137] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 8.661241] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 8.661381] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 8.661512] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 8.661703] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 8.661897] la/ptsa driver initialized. [ 8.661906] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 8.661909] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 8.662201] NET: Registered protocol family 2 [ 8.662807] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 8.663120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 8.663721] TCP: Hash tables configured (established 65536 bind 65536) [ 8.663771] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 8.663888] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 8.664218] NET: Registered protocol family 1 [ 8.664677] RPC: Registered named UNIX socket transport module. [ 8.664680] RPC: Registered udp transport module. [ 8.664683] RPC: Registered tcp transport module. [ 8.664685] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.664691] PCI: CLS 0 bytes, default 64 [ 8.664815] Trying to unpack rootfs image as initramfs... [ 8.830850] Freeing initrd memory: 5432K [ 8.887611] host1x 13e10000.host1x: initialized [ 8.888891] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 8.917811] audit: initializing netlink subsys (disabled) [ 8.917836] audit: type=2000 audit(8.808:1): initialized [ 8.918456] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 8.925353] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 8.930601] ntfs: driver 2.1.32 [Flags: R/W]. [ 8.931151] 9p: Installing v9fs 9p2000 file system support [ 8.933352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 8.933432] io scheduler noop registered [ 8.933632] io scheduler cfq registered (default) [ 8.967865] gic 2a41000.agic-controller: GIC IRQ controller registered [ 10.456360] __arm_smmu_context_fault: 218941 callbacks suppressed [ 10.456370] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9628fa80, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456433] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96298480, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456480] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9629ed40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456526] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962a4c40, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456570] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962aa340, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456615] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962b00c0, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456659] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962b5680, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456703] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962bb840, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456747] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962c0e00, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.456790] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x962c6140, fsynr=0x220001, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 11.019107] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 11.670196] iommu: Adding device 2993000.adsp to group 54 [ 11.702902] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 11.721041] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 11.770734] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 11.803112] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 11.820131] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 11.837136] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 11.886405] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 11.886993] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 11.887112] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 11.887117] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 11.920160] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 11.920231] tsec 15500000.tsec: initialized [ 11.936339] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 11.937219] tsec 15100000.tsecb: initialized [ 11.939492] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 11.970030] nvdec 15480000.nvdec: initialized [ 12.020166] falcon 15340000.vic: initialized [ 12.037400] falcon 154c0000.nvenc: initialized [ 12.070005] falcon 15380000.nvjpg: initialized [ 12.071840] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 12.073162] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 12.074453] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 12.075742] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 12.077076] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 12.078371] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 12.079677] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 12.080980] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 12.084187] tegradccommon 15200000.dc_common: host1x channel mapped [ 12.084195] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 12.084228] tegradccommon 15200000.dc_common: dma mapping done [ 12.084657] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 12.084700] generic_infoframe_type: 0x87 [ 12.084776] tegradc 15210000.nvdisplay: DT parsed successfully [ 12.084796] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 12.085356] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=390 [ 12.086473] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 12.103161] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 12.103176] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 12.103324] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 12.103327] tegra_cec 3960000.tegra_cec: probed [ 12.203769] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 12.203773] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 12.203775] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 12.203977] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 12.203983] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 12.209638] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 12.220652] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 12.220678] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 12.236753] kfuse 3830000.kfuse: initialized [ 12.238765] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 12.255237] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 12.271244] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 12.271249] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 12.287034] console [ttyS0] disabled [ 12.287061] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 12.304782] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 12.370606] tegradc 15210000.nvdisplay: probed [ 12.374358] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 12.771095] console [ttyS0] enabled [ 12.771301] Console: switching to colour frame buffer device 80x30 [ 12.771322] tegradc 15210000.nvdisplay: fb registered [ 12.777988] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 12.787236] gpio tegra-gpio wake21 for gpio=121(P:1) [ 12.787982] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 12.804088] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 12.804175] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 12.804239] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 12.827193] Parent Clock set for DC plld2 [ 12.827233] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 12.827409] serial-tegra 3130000.serial: RX in PIO mode [ 12.829322] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 12.830107] edid invalid [ 12.830439] [drm] Initialized [ 12.837717] brd: module loaded [ 12.841335] loop: module loaded [ 12.841395] tegra_profiler: version: 1.141, samples/io: 48/28 [ 12.841475] tegra_profiler: auth: init [ 12.841833] nct1008_nct72 7-004c: starting parse dt [ 12.841933] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 12.841938] nct1008_nct72 7-004c: success parsing dt [ 12.842052] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 12.842390] THERMAL EST: found 3 subdevs [ 12.842394] THERMAL EST num_resources: 0 [ 12.842398] [THERMAL EST subdev 0] [ 12.842402] [THERMAL EST subdev 1] [ 12.842405] [THERMAL EST subdev 2] [ 12.842669] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 12.842672] THERMAL EST: thz register success. [ 12.846802] THERMAL EST: end of probe, return err: 0 [ 12.847432] sd: No Scsi addr parsed to reserve index [ 12.847453] hisi_sas: driver version v1.6 [ 12.851015] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 12.851022] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 12.851821] scsi host0: tegra_ahci [ 12.852216] scsi host1: tegra_ahci [ 12.852375] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 12.852378] ata2: DUMMY [ 12.857540] libphy: Fixed MDIO Bus: probed [ 12.858064] tun: Universal TUN/TAP device driver, 1.6 [ 12.858066] tun: (C) 1999-2004 Max Krasnyansky [ 12.858762] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 12.858765] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 12.858796] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 12.858798] igb: Copyright (c) 2007-2014 Intel Corporation. [ 12.858829] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 12.858831] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 12.858867] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 12.858869] Copyright(c) 1999 - 2017 Intel Corporation. [ 12.868420] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 12.871429] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c6 8a 1c [ 12.871531] libphy: dwc_phy: probed [ 12.871816] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 12.873809] PPP generic driver version 2.4.2 [ 12.873930] PPP BSD Compression module registered [ 12.873934] PPP Deflate Compression module registered [ 12.873950] PPP MPPE Compression module registered [ 12.873954] NET: Registered protocol family 24 [ 12.873997] usbcore: registered new interface driver r8152 [ 12.874030] usbcore: registered new interface driver asix [ 12.874060] usbcore: registered new interface driver ax88179_178a [ 12.874089] usbcore: registered new interface driver cdc_ether [ 12.874116] usbcore: registered new interface driver net1080 [ 12.874141] usbcore: registered new interface driver cdc_subset [ 12.874168] usbcore: registered new interface driver zaurus [ 12.874203] usbcore: registered new interface driver cdc_ncm [ 12.874312] VFIO - User Level meta-driver version: 0.3 [ 12.874518] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 12.875012] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 12.875213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.875224] ehci-pci: EHCI PCI platform driver [ 12.875257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.875269] ohci-pci: OHCI PCI platform driver [ 12.875299] ohci-platform: OHCI generic platform driver [ 12.880366] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 12.880672] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 12.882375] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb47f400 id [ 12.883117] usbcore: registered new interface driver uas [ 12.883158] usbcore: registered new interface driver usb-storage [ 12.883222] usbcore: registered new interface driver usbserial [ 12.884362] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 12.886985] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 12.888029] tegra-xudc-new 3550000.xudc: device count: 1 [ 12.889076] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 12.889092] tegra-xudc-new 3550000.xudc: entering ELPG [ 12.890533] tegra-xudc-new 3550000.xudc: entering ELPG done [ 12.892818] mousedev: PS/2 mouse device common for all mice [ 12.892865] usbcore: registered new interface driver xpad [ 12.907758] nct1008_nct72 7-004c: initial LOC temp: 25000 [ 12.908058] nct1008_nct72 7-004c: initial EXT temp: 38250 [ 12.908663] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 12.908968] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 12.909154] nct1008_nct72 7-004c: nct1008_probe: initialized [ 12.912661] tegra-xusb 3530000.xhci: xHCI Host Controller [ 12.912677] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 12.913371] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 12.913400] tegra-xusb 3530000.xhci: irq 70, io mem 0x03530000 [ 12.913545] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.913551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.913554] usb usb1: Product: xHCI Host Controller [ 12.913558] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 12.913561] usb usb1: SerialNumber: 3530000.xhci [ 12.913887] hub 1-0:1.0: USB hub found [ 12.913915] hub 1-0:1.0: 4 ports detected [ 12.914253] tegra-xusb 3530000.xhci: xHCI Host Controller [ 12.914262] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 12.914393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 12.914398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.914401] usb usb2: Product: xHCI Host Controller [ 12.914404] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 12.914408] usb usb2: SerialNumber: 3530000.xhci [ 12.914698] hub 2-0:1.0: USB hub found [ 12.914725] hub 2-0:1.0: 3 ports detected [ 12.952341] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 12.958886] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 12.977042] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 12.978247] Wake73 for irq=42 [ 12.979521] rtc rtc1: alarm rtc device [ 12.979534] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 12.979549] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 12.979771] i2c /dev entries driver [ 12.981754] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 12.986786] parse_throttle_dt_data: Num cap clks = 4 [ 12.986791] parse_throttle_dt_data: clk=mcpu type=1 [ 12.986794] parse_throttle_dt_data: clk=bcpu type=2 [ 12.986801] parse_throttle_dt_data: clk=gpu type=4 [ 12.986804] parse_throttle_dt_data: clk=emc type=3 [ 12.987835] tegra_throttle_probe: probe successful. #cdevs=4 [ 12.988465] FAN dev name: pwm-fan [ 12.988532] FAN:gpio request success. [ 12.988541] FAN: can't find tach_gpio [ 12.988565] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 12.988761] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 12.988766] pwm_fan_driver pwm-fan: tach period: 1000 [ 12.989384] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 12.989388] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 12.989393] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 12.989397] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 12.989400] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 12.989404] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 12.989408] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 12.989411] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 12.989415] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 12.989419] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 12.990368] device-mapper: uevent: version 1.0.3 [ 12.990689] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 12.990949] CPU EMC frequency mapping table: from device tree [ 12.995318] cpufreq: platform driver Initialization: pass [ 12.995917] cpuidle: Initializing cpuidle driver init for Denver cluster [ 12.996040] cpuidle: Initializing cpuidle driver init for A57 cluster [ 12.996842] sdhci: Secure Digital Host Controller Interface driver [ 12.996843] sdhci: Copyright(c) Pierre Ossman [ 12.996845] sdhci-pltfm: SDHCI platform and OF driver helper [ 12.998056] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 12.999825] CMDQ: cmdq_platfm_init successful [ 13.000856] CQE: CMD_TIMING bit set for R1B DCMD [ 13.003332] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 13.008016] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 13.008067] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 13.009717] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 13.011391] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 13.014102] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 13.016343] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.022886] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 13.030880] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 13.039384] tegra-se-nvhost 15810000.se: initialized [ 13.040584] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 13.041154] tegra-se-nvhost 15820000.se: initialized [ 13.042072] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 13.042626] tegra-se-nvhost 15830000.se: initialized [ 13.043369] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 13.043909] tegra-se-nvhost 15840000.se: initialized [ 13.044785] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 13.045013] hidraw: raw HID events driver (C) Jiri Kosina [ 13.045858] usbcore: registered new interface driver usbhid [ 13.045861] usbhid: USB HID core driver [ 13.048357] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 13.048359] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 13.051518] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 13.053727] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 13.053969] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 13.054088] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 13.054316] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 13.055330] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 13.055400] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 13.055447] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 13.055497] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 13.055714] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 13.056083] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 13.056087] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 13.056737] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 13.059624] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 13.060048] tegra186-aondbg aondbg: aondbg driver probe() OK [ 13.060201] register_ari_mca_banks: Registered MCA ROC:IOB [ 13.060267] register_ari_mca_banks: Registered MCA ROC:CCE [ 13.060598] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060601] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 13.060603] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 13.060656] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060658] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 13.060660] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 13.060713] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060715] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 13.060717] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 13.060764] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060767] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 13.060769] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 13.060824] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060826] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 13.060828] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 13.060878] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060882] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 13.060884] tegra18-bridge 2100000.axip2p: bridge probed OK [ 13.060930] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060935] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 13.060937] tegra18-bridge 2110000.axip2p: bridge probed OK [ 13.060983] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.060987] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 13.060989] tegra18-bridge 2120000.axip2p: bridge probed OK [ 13.061035] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061040] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 13.061042] tegra18-bridge 2130000.axip2p: bridge probed OK [ 13.061088] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061091] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 13.061093] tegra18-bridge 2140000.axip2p: bridge probed OK [ 13.061143] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061149] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 13.061151] tegra18-bridge 2150000.axip2p: bridge probed OK [ 13.061198] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061203] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 13.061205] tegra18-bridge 2160000.axip2p: bridge probed OK [ 13.061251] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061256] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 13.061259] tegra18-bridge 2170000.axip2p: bridge probed OK [ 13.061305] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061310] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 13.061312] tegra18-bridge 2180000.axip2p: bridge probed OK [ 13.061358] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 13.061363] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 13.061365] tegra18-bridge 2190000.axip2p: bridge probed OK [ 13.063532] **** A57 ECC: Enabled [ 13.063534] tegra18_a57_serr_init: on CPU 3 a A57 Core [ 13.063594] tegra18x_actmon d230000.actmon: in actmon_register()... [ 13.064049] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 13.064379] gpio tegra-gpio wake71 for gpio=125(P:5) [ 13.064422] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 13.064487] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 13.064607] denver_knobs_init:MTS_VERSION:47926945 [ 13.066365] nvpmodel: initialized successfully [ 13.067363] trusty-virtio trusty:virtio: initializing [ 13.067473] trusty_ipc virtio0: vring0: va(pa) ffffffc1e7e26000(0) qsz 32 notifyid 1 [ 13.067479] trusty_ipc virtio0: vring1: va(pa) ffffffc1e7e3c000(0) qsz 32 notifyid 2 [ 13.067543] trusty-virtio trusty:virtio: initializing done [ 13.067633] trusty_ipc virtio0: is online [ 13.069113] usbcore: registered new interface driver snd-usb-audio [ 13.085972] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 13.086088] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 13.092176] OPE platform probe [ 13.092243] OPE platform probe successful [ 13.093829] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 13.106605] mmc0: periodic cache flush enabled [ 13.106615] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 13.106957] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 13.107069] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 13.107189] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 13.107288] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 13.109469] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 13.132612] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 13.132617] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 13.143781] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.147110] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 13.147179] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 13.147245] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 13.147314] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 13.147388] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 13.147452] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 13.147530] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 13.147594] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 13.147655] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 13.147701] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.147736] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 13.147801] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 13.147867] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 13.147935] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 13.148001] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 13.148071] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 13.148134] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 13.148198] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 13.148269] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 13.148360] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 13.148436] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 13.151642] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.155560] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.159480] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.163412] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.167345] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.170706] ata1: SATA link down (SStatus 0 SControl 300) [ 13.171261] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.174357] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 13.175165] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.176342] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 13.179064] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.179563] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 13.184423] u32 classifier [ 13.184424] Actions configured [ 13.184483] Initializing XFRM netlink socket [ 13.184999] NET: Registered protocol family 10 [ 13.185483] tegradc 15210000.nvdisplay: hdmi: using fallback edid [ 13.185608] NET: Registered protocol family 17 [ 13.185617] NET: Registered protocol family 15 [ 13.185674] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 13.185689] tegradc 15210000.nvdisplay: blank - powerdown [ 13.185717] Bluetooth: RFCOMM socket layer initialized [ 13.185726] Bluetooth: RFCOMM ver 1.11 [ 13.185729] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 13.185732] Bluetooth: HIDP socket layer initialized [ 13.185746] 9pnet: Installing 9P2000 support [ 13.185783] Key type dns_resolver registered [ 13.186684] Registered cp15_barrier emulation handler [ 13.186697] Registered setend emulation handler [ 13.188148] registered taskstats version 1 [ 13.191992] isp 15600000.isp: initialized [ 13.198283] tegradc 15210000.nvdisplay: unblank [ 13.198475] Parent Clock set for DC plld2 [ 13.198609] nvcsi 150c0000.nvcsi: initialized [ 13.202388] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 13.203111] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 13.203191] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 13.203260] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 13.203384] input: gpio-keys as /devices/gpio-keys/input/input2 [ 13.211976] tegra-vi4 15700000.vi: initialized [ 13.212834] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ 13.212837] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 13.233425] tegra_rtc c2a0000.rtc: setting system clock to 2020-09-03 12:56:43 UTC (1599137803) [ 13.234738] mmcblk mmc0:0001: Card claimed for testing. [ 13.244350] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 13.252362] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.252365] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 13.263269] bpmp: mounted debugfs mirror [ 13.264569] bwmgr: missing cdev-type property [ 13.269283] spmic-ldo0: disabling [ 13.269499] spmic-ldo1: disabling [ 13.269640] en-vdd-sd: disabling [ 13.269641] en-vdd-cam: disabling [ 13.269643] vdd-usb0-5v: disabling [ 13.269644] vdd-usb1-5v: disabling [ 13.269647] en-vdd-disp-3v3: disabling [ 13.269648] en-mdm-pwr-3v7: disabling [ 13.269650] en-vdd-disp-1v8: disabling [ 13.269651] en-vdd-cam-hv-2v8: disabling [ 13.269652] en-vdd-cam-1v2: disabling [ 13.269654] vdd-fan: disabling [ 13.269655] vdd-3v3: disabling [ 13.269657] en-vdd-vcm-2v8: disabling [ 13.269659] vdd-sys-bl: disabling [ 13.269660] en-vdd-sys: disabling [ 13.269662] ALSA device list: [ 13.269664] #0: tegra-hda at 0x3518000 irq 383 [ 13.269665] #1: tegra-snd-t186ref-mobile-rt565x [ 13.272393] usb 1-2: New USB device found, idVendor=413c, idProduct=2113 [ 13.272396] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 13.272398] usb 1-2: Product: Dell KB216 Wired Keyboard [ 13.277314] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:2113.0001/input/input3 [ 13.291951] mmc1: hw tuning done ... [ 13.295724] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 13.304337] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.304339] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 13.336633] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2/input0 [ 13.343217] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.1/0003:413C:2113.0002/input/input4 [ 13.356340] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.356343] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 13.400460] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2/input1 [ 13.408349] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 13.408352] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 13.408354] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 13.408365] tegradc 15210000.nvdisplay: update windows ret = -14 [ 13.408367] tegradc 15210000.nvdisplay: sync windows ret = -14 [ 13.474825] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 13.474827] Extcon HDMI: HPD enabled [ 13.474842] tegradc 15210000.nvdisplay: hdmi: plugged [ 13.477064] Freeing unused kernel memory: 8576K [ 13.498268] Root device found: mmcblk0p1 [ 13.499070] Found dev node: /dev/mmcblk0p1 [ 13.588593] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 13.689773] EXT4-fs (mmcblk0p1): 16 orphan inodes deleted [ 13.689777] EXT4-fs (mmcblk0p1): recovery complete [ 13.693386] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 13.694080] Rootfs mounted over mmcblk0p1 [ 13.708501] Switching from initrd to actual rootfs [ 13.816690] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.825441] cgroup: cgroup2: unknown option "nsdelegate" [ 13.840178] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 13.840941] systemd[1]: Detected architecture arm64. [ 13.860669] systemd[1]: Set hostname to . [ 13.951711] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 13.951720] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 14.000351] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 14.059236] systemd[1]: Reached target User and Group Name Lookups. [ 14.059484] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.060734] systemd[1]: Created slice System Slice. [ 14.061039] systemd[1]: Listening on Journal Audit Socket. [ 14.061135] systemd[1]: Listening on udev Kernel Socket. [ 14.093133] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 14.111003] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 14.321846] systemd-journald[2255]: Received request to flush runtime journal from PID 1 [ 14.416371] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 14.418400] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 14.620844] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 14.621136] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 14.861305] using random self ethernet address [ 14.878779] using random host ethernet address [ 15.481664] Mass Storage Function, version: 2009/09/11 [ 15.481669] LUN: removable file: (no medium) [ 15.489422] using random self ethernet address [ 15.494373] using random host ethernet address [ 15.540690] rndis0: HOST MAC 7e:d0:e9:b7:ee:94 [ 15.546758] rndis0: MAC 7e:d0:e9:b7:ee:95 [ 15.548991] usb0: HOST MAC 7e:d0:e9:b7:ee:96 [ 15.549022] usb0: MAC 7e:d0:e9:b7:ee:97 [ 15.549040] tegra-xudc-new 3550000.xudc: exiting ELPG [ 15.557002] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 15.557022] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 15.557054] tegra-xudc-new 3550000.xudc: entering ELPG [ 15.558358] tegra-xudc-new 3550000.xudc: entering ELPG done [ 15.558382] tegra-xudc-new 3550000.xudc: exiting ELPG [ 15.564801] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 15.564827] tegra-xudc-new 3550000.xudc: entering ELPG [ 15.566198] tegra-xudc-new 3550000.xudc: entering ELPG done [ 15.573984] l4tbr0: port 1(rndis0) entered blocking state [ 15.573989] l4tbr0: port 1(rndis0) entered disabled state [ 15.574142] device rndis0 entered promiscuous mode [ 15.593725] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 15.599955] l4tbr0: port 2(usb0) entered blocking state [ 15.599960] l4tbr0: port 2(usb0) entered disabled state [ 15.600099] device usb0 entered promiscuous mode [ 15.610508] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 15.842657] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.878058] CPU1: shutdown [ 15.881975] psci: CPU1 killed. [ 15.915990] dhd_module_init in [ 15.916064] found wifi platform device bcmdhd_wlan [ 15.920324] wifi_platform_get_country_code_map: could not get country_code_map [ 15.920364] wifi_plat_dev_drv_probe:platform country code map is not available [ 15.920381] Power-up adapter 'DHD generic adapter' [ 15.920389] wifi_platform_set_power = 1 [ 15.921187] gpio tegra-gpio wake18 for gpio=101(M:5) [ 15.923495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.946767] CPU2: shutdown [ 15.950651] psci: CPU2 killed. [ 16.036527] Wake76 for irq=199 [ 16.036530] Wake77 for irq=199 [ 16.036532] Wake78 for irq=199 [ 16.036533] Wake79 for irq=199 [ 16.036534] Wake80 for irq=199 [ 16.036536] Wake81 for irq=199 [ 16.036537] Wake82 for irq=199 [ 16.036568] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 16.036572] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 16.132385] wifi_platform_bus_enumerate device present 1 [ 16.136526] usb usb2: usb_suspend_both: status 0 [ 16.136842] zram: Added device: zram0 [ 16.141670] zram: Added device: zram1 [ 16.143852] zram: Added device: zram2 [ 16.147384] zram: Added device: zram3 [ 16.159172] wifi_platform_bus_enumerate device present 0 [ 16.159964] F1 signature read @0x18000000=0x17214354 [ 16.174051] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 16.174891] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 16.174989] wifi_platform_get_mac_addr [ 16.180630] zram0: detected capacity change from 0 to 1029144576 [ 16.182137] ids dhd_log_netlink_init [ 16.191111] wl_create_event_handler(): thread:wl_event_handler:15c7 started [ 16.191113] wl_event_handler : [ 16.191116] tsk Enter, tsk = 0xffffffc1cdf01a90 [ 16.198874] dhd_attach(): thread:dhd_watchdog_thread:15c9 started [ 16.198955] dhd_attach(): thread:dhd_dpc:15d0 started [ 16.199023] dhd_attach(): thread:dhd_rxf:15d1 started [ 16.199031] dhd_deferred_work_init: work queue initialized [ 16.199817] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 16.207509] Adding 1005020k swap on /dev/zram0. Priority:5 extents:1 across:1005020k SS [ 16.221327] Register interface [wlan0] MAC: 00:04:4b:c6:8a:1a [ 16.221335] dhd_prot_ioctl : bus is down. we have nothing to do [ 16.221891] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 16.225409] zram1: detected capacity change from 0 to 1029144576 [ 16.229362] wifi_platform_set_power = 0 [ 16.254933] Adding 1005020k swap on /dev/zram1. Priority:5 extents:1 across:1005020k SS [ 16.263883] zram2: detected capacity change from 0 to 1029144576 [ 16.275156] Adding 1005020k swap on /dev/zram2. Priority:5 extents:1 across:1005020k SS [ 16.285611] zram3: detected capacity change from 0 to 1029144576 [ 16.301222] Adding 1005020k swap on /dev/zram3. Priority:5 extents:1 across:1005020k SS [ 17.171271] tegradc 15210000.nvdisplay: blank - powerdown [ 17.171289] tegradc 15210000.nvdisplay: unblank [ 17.171828] Parent Clock set for DC plld2 [ 17.224347] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.224351] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.276346] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.276349] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.328366] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.328369] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 17.380357] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.380360] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 17.380362] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 17.454772] tegradc 15210000.nvdisplay: unblank [ 17.455752] Parent Clock set for DC plld2 [ 17.508385] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.508388] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.560360] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.560363] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.612356] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.612359] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 17.664354] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.664358] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 17.664360] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 17.911557] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.911670] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 17.911679] wl_android_wifi_on in [ 17.911684] wifi_platform_set_power = 1 [ 18.124089] vdd-1v8: voltage operation not allowed [ 18.129035] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.156591] vdd-1v8: voltage operation not allowed [ 18.161455] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.189392] vdd-1v8: voltage operation not allowed [ 18.194235] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.203432] vdd-1v8: voltage operation not allowed [ 18.208519] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.315152] vdd-1v8: voltage operation not allowed [ 18.320021] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.328538] vdd-1v8: voltage operation not allowed [ 18.333428] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.341709] vdd-1v8: voltage operation not allowed [ 18.346580] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 18.353273] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 18.353840] F1 signature read @0x18000000=0x17214354 [ 18.359395] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 18.360005] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 18.427970] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 18.492524] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 18.492815] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 18.492872] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 18.492875] Enabling wake69 [ 18.493641] wifi_platform_get_mac_addr [ 18.495661] Firmware up: op_mode=0x0005, MAC=00:04:4b:c6:8a:1a [ 18.500257] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 18.500286] Skipping the clm download. len:0 memblk: (null) [ 18.502613] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 18.507447] Firmware version = wl0: Nov 6 2019 21:22:23 version 7.35.349.85 (r723239 CY) FWID 01-a59d25b5 [ 18.509800] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 18.603608] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 18.603612] P2P interface registered [ 18.611872] WLC_E_IF: NO_IF set, event Ignored [ 18.621241] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.831472] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 18.832549] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.259594] fuse init (API version 7.26) [ 20.461820] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.461831] Bluetooth: BNEP socket layer initialized [ 20.925114] tegradc 15210000.nvdisplay: blank - powerdown [ 20.925206] tegradc 15210000.nvdisplay: unblank [ 20.925615] Parent Clock set for DC plld2 [ 20.976349] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 20.976352] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.029560] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.029563] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.082143] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.082146] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 21.132371] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.132374] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 21.132377] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 21.196388] tegradc 15210000.nvdisplay: unblank [ 21.196725] Parent Clock set for DC plld2 [ 21.248348] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.248351] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.300357] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.300360] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 21.352383] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.352389] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 21.404370] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 21.404374] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 21.404376] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ ls dtb extlinux grub Image initrd initrd.img initrd.img-4.9.140-tegra tegra186-quill-p3310-1000-a00-00-base.dtb tegra186-quill-p3310-1000-as-0888.dtb tegra186-quill-p3310-1000-c03-00-base-adafruit-sph0645lm4h.dtbo tegra186-quill-p3310-1000-c03-00-base.dtb tegra186-quill-p3310-1000-c03-00-base.dtb.sb tegra186-quill-p3310-1000-c03-00-base-fe-pi-audio-z-v2.dtbo tegra186-quill-p3310-1000-c03-00-base-hdr40.dtbo tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt tegra186-quill-p3310-1000-c03-00-dsi-hdmi-dp.dtb tegra186-quill-p3489-0888-a00-00-base.dtb tegra186-quill-p3489-1000-a00-00-ucm1.dtb tegra186-quill-p3489-1000-a00-00-ucm2.dtb tegra194-p2888-0001-p2822-0000-adafruit-sph0645lm4h.dtbo tegra194-p2888-0001-p2822-0000.dtb tegra194-p2888-0001-p2822-0000-fe-pi-audio-z-v2.dtbo tegra194-p2888-0001-p2822-0000-hdr40.dtbo tegra194-p2888-0001-p2822-0000-maxn.dtb tegra194-p3668-all-p3509-0000-adafruit-sph0645lm4h.dtbo tegra194-p3668-all-p3509-0000-fe-pi-audio-z-v2.dtbo tegra194-p3668-all-p3509-0000-hdr40.dtbo nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ nvidia@nvidia-desktop:/boot$ cat /e/boot/