[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (root@asus-docker-env) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jun 27 07:46:20 UTC 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1004541 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29780(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3149168K/4018164K available (14398K kernel code, 2892K rwdata, 6592K rodata, 8448K init, 612K bss, 115332K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e90000 ( 14400 KB) [ 0.000000] .rodata : 0xffffff8008e90000 - 0xffffff8009510000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009510000 - 0xffffff8009d50000 ( 8448 KB) [ 0.000000] .data : 0xffffff8009d50000 - 0xffffff800a023008 ( 2893 KB) [ 0.000000] .bss : 0xffffff800a023008 - 0xffffff800a0bc1f4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000978] Console: colour dummy device 80x25 [ 0.000984] console [tty0] enabled [ 0.000987] bootconsole [uart8250] disabled [ 0.000995] kmemleak: Kernel memory leak detector disabled [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001012] pid_max: default: 32768 minimum: 301 [ 0.001317] Security Framework initialized [ 0.001472] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001476] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002049] ftrace: allocating 45420 entries in 178 pages [ 0.121369] sched-energy: Sched-energy-costs installed from DT [ 0.121379] ASID allocator initialised with 65536 entries [ 0.156848] tegra-id: chipid=21817. [ 0.156854] tegra-id: opt_subrevision=1. [ 0.156872] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.156880] DTS File Name: /source/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.156885] DTB Build time: [ 0.206691] CPU1: Booted secondary processor [4e0f0030] [ 0.238036] CPU2: Booted secondary processor [4e0f0030] [ 0.269065] CPU3: Booted secondary processor [411fd073] [ 0.301033] CPU4: Booted secondary processor [411fd073] [ 0.333013] CPU5: Booted secondary processor [411fd073] [ 0.333070] Brought up 6 CPUs [ 0.333073] SMP: Total of 6 processors activated. [ 0.333078] CPU features: detected feature: 32-bit EL0 Support [ 0.335260] CPU: All CPU(s) started at EL2 [ 0.335396] alternatives: patching kernel code [ 0.337823] devtmpfs: initialized [ 0.360888] Initilizing CustomIPI irq domain [ 0.361038] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.361047] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.369781] pinctrl core: initialized pinctrl subsystem [ 0.370026] OS set in device tree is not L4T. [ 0.370189] regulator-dummy: no parameters [ 0.370323] Initializing plugin-manager [ 0.370378] Plugin module not found [ 0.370412] Plugin-manager status disabled [ 0.371530] NET: Registered protocol family 16 [ 0.372459] pstore: using zlib compression [ 0.372473] console [pstore-1] enabled [ 0.372475] pstore: Registered ramoops as persistent store backend [ 0.372479] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.385080] cpuidle: using governor menu [ 0.386029] bpmp: waiting for handshake [ 0.386033] bpmp: handshake completed [ 0.386051] bpmp: synchronizing channels [ 0.386058] bpmp: channels synchronized [ 0.386062] bpmp: mail init ok [ 0.387534] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.387539] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.387544] arm-smmu 12000000.iommu: stage 1 translation [ 0.387547] arm-smmu 12000000.iommu: stage 2 translation [ 0.387550] arm-smmu 12000000.iommu: nested translation [ 0.387556] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.387562] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.387566] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.387571] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.387575] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.389428] vdso: 2 pages (1 code @ ffffff8008e97000, 1 data @ ffffff8009d54000) [ 0.389442] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.392691] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.393706] Registering BPMP clocks... [ 0.393778] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.394232] Serial: AMBA PL011 UART driver [ 0.395131] tegra_powergate_init: DONE [ 0.395138] DTS File Name: /source/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.395142] DTB Build time: [ 0.396431] Tegra reboot handler registered. [ 0.397575] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.397639] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.397652] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.397655] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.397658] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.397814] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.397824] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.398087] iommu: Adding device 3460000.sdhci to group 0 [ 0.398492] iommu: Adding device 3440000.sdhci to group 1 [ 0.398764] tegra186-pinctrl 2430000.pinmux: Start Pinctrl settings [ 0.399379] tegra186-pinctrl 2430000.pinmux: findish Pinctrl settings [ 0.399657] iommu: Adding device 3160000.i2c to group 2 [ 0.400072] iommu: Adding device c240000.i2c to group 3 [ 0.400366] iommu: Adding device 3180000.i2c to group 4 [ 0.400673] iommu: Adding device 3190000.i2c to group 5 [ 0.401083] iommu: Adding device 31b0000.i2c to group 6 [ 0.401382] iommu: Adding device 31c0000.i2c to group 7 [ 0.401670] iommu: Adding device c250000.i2c to group 8 [ 0.401956] iommu: Adding device 31e0000.i2c to group 9 [ 0.403439] iommu: Adding device 3210000.spi to group 10 [ 0.403742] iommu: Adding device c260000.spi to group 11 [ 0.404413] iommu: Adding device 3100000.serial to group 12 [ 0.404705] iommu: Adding device 3110000.serial to group 13 [ 0.404983] iommu: Adding device c280000.serial to group 14 [ 0.405280] iommu: Adding device 3130000.serial to group 15 [ 0.406416] iommu: Adding device 2490000.ether_qos to group 16 [ 0.406428] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.407243] iommu: Adding device b000000.rtcpu to group 17 [ 0.408948] iommu: Adding device 13e10000.host1x to group 18 [ 0.409282] iommu: Adding device 13e10000.host1x:ctx0 to group 19 [ 0.409559] iommu: Adding device 13e10000.host1x:ctx1 to group 20 [ 0.409844] iommu: Adding device 13e10000.host1x:ctx2 to group 21 [ 0.410119] iommu: Adding device 13e10000.host1x:ctx3 to group 22 [ 0.410390] iommu: Adding device 13e10000.host1x:ctx4 to group 23 [ 0.410679] iommu: Adding device 13e10000.host1x:ctx5 to group 24 [ 0.410961] iommu: Adding device 13e10000.host1x:ctx6 to group 25 [ 0.411247] iommu: Adding device 13e10000.host1x:ctx7 to group 26 [ 0.411675] iommu: Adding device 150c0000.nvcsi to group 27 [ 0.412244] iommu: Adding device 15700000.vi to group 28 [ 0.412560] iommu: Adding device 15600000.isp to group 29 [ 0.412770] iommu: Adding device 15200000.dc_common to group 30 [ 0.412817] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x800000) [ 0.412860] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.413363] iommu: Adding device 15200000.nvdisplay to group 31 [ 0.413685] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.413997] iommu: Adding device 15340000.vic to group 33 [ 0.414211] iommu: Adding device 154c0000.nvenc to group 34 [ 0.414402] iommu: Adding device 15480000.nvdec to group 35 [ 0.414710] iommu: Adding device 15380000.nvjpg to group 36 [ 0.414905] iommu: Adding device 15500000.tsec to group 37 [ 0.415095] iommu: Adding device 15100000.tsecb to group 38 [ 0.415997] iommu: Adding device 15810000.se to group 39 [ 0.416198] iommu: Adding device 15820000.se to group 40 [ 0.416410] iommu: Adding device 15830000.se to group 41 [ 0.416604] iommu: Adding device 15840000.se to group 42 [ 0.417382] iommu: Adding device smmu_test to group 43 [ 0.417930] mc: mapped MMIO address: 0xffffff800a5c0000 -> 0x2c10000 [ 0.417941] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c20000 [ 0.417952] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.417961] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.417972] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c50000 [ 0.417980] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.417991] mc-err: mcerr ops are set to t18x [ 0.418127] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.418881] iommu: Adding device 3530000.xhci to group 44 [ 0.418897] arm-smmu: forcing sodev map for 3530000.xhci [ 0.419284] iommu: Adding device 3550000.xudc to group 45 [ 0.419295] arm-smmu: forcing sodev map for 3550000.xudc [ 0.419794] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.419801] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.419806] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.420383] iommu: Adding device 17000000.gp10b to group 46 [ 0.421340] tegra-reset 5000000.clock: registered 193 resets. [ 0.423185] iommu: Adding device d000000.bpmp to group 47 [ 0.423387] bpmp: ping status is 0 [ 0.423465] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.425169] bpmp d000000.bpmp: probe ok [ 0.427728] iommu: Adding device 2600000.dma to group 48 [ 0.428411] gpio-tegra186 2200000.gpio: GPio start initialization [ 0.428553] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.428585] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.428628] GPIO line 408 (w-disable1) hogged as output/high [ 0.428664] GPIO line 410 (w-disable2) hogged as output/high [ 0.428828] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.432070] gpio-tegra186 2200000.gpio: End GPIO initalization [ 0.432345] gpio-tegra186 c2f0000.gpio: GPio start initialization [ 0.432562] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.433808] gpio-tegra186 c2f0000.gpio: End GPIO initalization [ 0.434167] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.434182] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.434608] iommu: Adding device 3510000.hda to group 50 [ 0.441254] iommu: Adding device c1a0000.aon to group 51 [ 0.441867] vdd-sdmmc1-sw: 3300 mV [ 0.442093] vdd-1v8-ap: 1800 mV [ 0.442281] vdd-ac-bat: 5000 mV [ 0.442459] vdd-3v3-disp-cvb: 3300 mV [ 0.442723] vdd-3v3-cvb: 3300 mV [ 0.442901] vdd-1v8-cvb: 1800 mV [ 0.443076] vdd-fan: 5000 mV [ 0.443268] vdd-hdmi-5v0: 5000 mV [ 0.443441] vdd_sys_en: 1200 mV [ 0.465480] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.468024] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.468220] SCSI subsystem initialized [ 0.468321] libata version 3.00 loaded. [ 0.468468] usbcore: registered new interface driver usbfs [ 0.468500] usbcore: registered new interface driver hub [ 0.468527] usbcore: registered new device driver usb [ 0.470945] random: fast init done [ 0.477847] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.480761] vddio-ddr: at 1125 mV [ 0.484559] avdd_dsi_csi: 1200 mV [ 0.488558] vdd-1v8: 1800 mV [ 0.492555] vdd-3v3-sys: 3300 mV [ 0.493208] spmic-ldo0: at 1800 mV [ 0.493843] spmic-ldo1: at 800 mV [ 0.496556] vddio-3v3: 3300 mV [ 0.497218] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.500558] vdd-rtc: at 800 mV [ 0.501125] avdd-ts-hv: 1800 <--> 3300 mV at 3300 mV [ 0.504557] spmic-ldo6: at 800 mV [ 0.508555] vdd-pex-1v00: 1000 mV [ 0.509143] dvdd-pex: 1000 mV [ 0.511141] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.511273] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.511428] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.511620] max77620 4-003c: max77620 probe successful [ 0.511988] media: Linux media interface: v0.10 [ 0.512019] Linux video capture interface: v2.00 [ 0.514301] pps_core: LinuxPPS API ver. 1 registered [ 0.514304] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.514322] PTP clock support registered [ 0.514557] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.514742] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.514759] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.515850] trusty trusty: trusty version: Built: 08:57:14 Feb 19 2022 [ 0.515863] trusty trusty: selected api version: 3 (requested 3) [ 0.516635] Advanced Linux Sound Architecture Driver Initialized. [ 0.516999] Bluetooth: Core ver 2.22 [ 0.517026] NET: Registered protocol family 31 [ 0.517028] Bluetooth: HCI device and connection manager initialized [ 0.517035] Bluetooth: HCI socket layer initialized [ 0.517040] Bluetooth: L2CAP socket layer initialized [ 0.517054] Bluetooth: SCO socket layer initialized [ 0.517637] vdd-sys-bl: 3300 mV [ 0.519248] camchar: rtcpu character device driver loaded [ 0.519679] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.519749] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.520593] clocksource: Switched to clocksource arch_sys_counter [ 0.542978] VFS: Disk quotas dquot_6.6.0 [ 0.543052] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.543295] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.543724] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.543832] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.543836] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.543844] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.543848] nvmap_page_pool_init: Total RAM pages: 975708 [ 0.543852] nvmap_page_pool_init: nvmap page pool size: 121963 pages (476 MB) [ 0.543917] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.544384] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.546795] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.552462] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.552671] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.553006] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.553078] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.553211] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.553422] la/ptsa driver initialized. [ 0.553430] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.553433] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.553720] NET: Registered protocol family 2 [ 0.553784] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.555312] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.555468] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.555768] TCP: Hash tables configured (established 32768 bind 32768) [ 0.555817] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.555877] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.556140] NET: Registered protocol family 1 [ 0.556473] RPC: Registered named UNIX socket transport module. [ 0.556477] RPC: Registered udp transport module. [ 0.556480] RPC: Registered tcp transport module. [ 0.556482] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.556488] PCI: CLS 0 bytes, default 64 [ 0.556626] Trying to unpack rootfs image as initramfs... [ 0.768368] Freeing initrd memory: 7068K [ 0.782909] host1x 13e10000.host1x: initialized [ 0.784170] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.786290] audit: initializing netlink subsys (disabled) [ 0.786314] audit: type=2000 audit(0.676:1): initialized [ 0.786707] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.793180] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.794242] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.794870] 9p: Installing v9fs 9p2000 file system support [ 0.796973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 0.797037] io scheduler noop registered [ 0.797242] io scheduler cfq registered (default) [ 0.800137] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.860822] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 0.880795] iommu: Adding device 2993000.adsp to group 53 [ 0.881354] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.885843] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.886722] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.887506] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.888290] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.890226] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.890945] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.891228] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.891435] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.891546] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.892750] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.893836] tsec 15500000.tsec: initialized [ 0.894753] tsec 15100000.tsecb: initialized [ 0.897015] nvdec 15480000.nvdec: initialized [ 0.900852] falcon 15340000.vic: initialized [ 0.901981] falcon 154c0000.nvenc: initialized [ 0.903008] falcon 15380000.nvjpg: initialized [ 0.904975] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.906480] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.908000] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.909530] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.910997] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.912450] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.914049] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.915560] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.918221] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.918228] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.918262] tegradccommon 15200000.dc_common: dma mapping done [ 0.919103] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.919147] generic_infoframe_type: 0x87 [ 0.919223] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.919248] tegradc 15200000.nvdisplay: Display dc.ffffff800b620000 registered with id=0 [ 0.924814] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.924817] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.924820] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.924973] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.924979] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.925920] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.927902] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.927907] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.930137] tegradc 15200000.nvdisplay: probed [ 0.930996] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.931569] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.931591] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.932762] kfuse 3830000.kfuse: initialized [ 0.934142] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.937051] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.939144] console [ttyS0] disabled [ 0.939180] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 0.939217] console [ttyS0] enabled [ 0.939801] serial-tegra 3110000.serial: No rts-gpio pin available [ 0.946337] Console: switching to colour frame buffer device 240x67 [ 0.946426] tegradc 15200000.nvdisplay: fb registered [ 0.946573] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.946648] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 0.946849] serial-tegra c280000.serial: No rts-gpio pin available [ 0.946971] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.947017] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.948014] Parent Clock set for DC plld2 [ 0.953592] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 0.953767] serial-tegra 3130000.serial: RX in PIO mode [ 0.953778] serial-tegra 3130000.serial: No rts-gpio pin available [ 0.960534] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 0.961589] [drm] Initialized [ 0.968442] brd: module loaded [ 0.971901] loop: module loaded [ 0.971950] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.972027] tegra_profiler: auth: init [ 0.973081] sd: No Scsi addr parsed to reserve index [ 0.973120] hisi_sas: driver version v1.6 [ 0.994103] tpm_tis_spi spi0.0: 2.0 TPM (device-id 0xFC, rev-id 1) [ 1.013535] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.013960] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.013970] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.039925] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.039928] Extcon AUX1(HDMI) enable [ 1.040302] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.040418] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.040441] tegradc 15210000.nvdisplay: Display dc.ffffff800b890000 registered with id=1 [ 1.040644] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.040650] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.048596] tegradc 15210000.nvdisplay: probed [ 1.048767] tegradc 15210000.nvdisplay: fb registered [ 1.051962] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.051966] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.051974] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.051981] tegradc 15210000.nvdisplay: blank - powerdown [ 1.051991] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.051994] Extcon DP: HPD disabled [ 1.051996] hpd: hpd_switch 0 [ 1.051999] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.052006] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.052012] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.165026] libphy: Fixed MDIO Bus: probed [ 1.165749] tun: Universal TUN/TAP device driver, 1.6 [ 1.165752] tun: (C) 1999-2004 Max Krasnyansky [ 1.166921] PPP generic driver version 2.4.2 [ 1.167087] PPP BSD Compression module registered [ 1.167091] PPP Deflate Compression module registered [ 1.167105] PPP MPPE Compression module registered [ 1.167109] NET: Registered protocol family 24 [ 1.167155] usbcore: registered new interface driver asix [ 1.167187] usbcore: registered new interface driver ax88179_178a [ 1.167213] usbcore: registered new interface driver cdc_ether [ 1.167238] usbcore: registered new interface driver net1080 [ 1.167272] usbcore: registered new interface driver cdc_subset [ 1.167301] usbcore: registered new interface driver zaurus [ 1.167337] usbcore: registered new interface driver cdc_ncm [ 1.167364] usbcore: registered new interface driver qmi_wwan [ 1.167390] usbcore: registered new interface driver cdc_mbim [ 1.167495] VFIO - User Level meta-driver version: 0.3 [ 1.168340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.168350] ehci-pci: EHCI PCI platform driver [ 1.168380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.168386] ohci-pci: OHCI PCI platform driver [ 1.168418] ohci-platform: OHCI generic platform driver [ 1.169308] Reset the mpcie-reset-gpios! [ 1.172288] tegradc 15200000.nvdisplay: blank - powerdown [ 1.213848] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.213850] Extcon AUX1(HDMI) disable [ 1.237350] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.238166] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.253275] tegradc 15200000.nvdisplay: unblank [ 1.254301] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.254468] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.258522] Parent Clock set for DC plld2 [ 1.261802] tegradc 15200000.nvdisplay: hdmi: tmds rate:106500K prod-setting:prod_c_hdmi_54m_111m [ 1.262996] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.298161] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.298163] Extcon AUX1(HDMI) enable [ 1.313212] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.316555] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.335229] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.335232] Extcon HDMI: HPD enabled [ 1.335249] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.374434] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.375919] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efe82000 id [ 1.376627] usbcore: registered new interface driver cdc_acm [ 1.376630] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.376660] usbcore: registered new interface driver cdc_wdm [ 1.376764] usbcore: registered new interface driver uas [ 1.376803] usbcore: registered new interface driver usb-storage [ 1.376871] usbcore: registered new interface driver usbserial [ 1.376897] usbcore: registered new interface driver option [ 1.376914] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.378271] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.378295] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.378311] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.379022] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.379048] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 1.379232] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.379238] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.379242] usb usb1: Product: xHCI Host Controller [ 1.379246] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.379249] usb usb1: SerialNumber: 3530000.xhci [ 1.379595] hub 1-0:1.0: USB hub found [ 1.379629] hub 1-0:1.0: 4 ports detected [ 1.380034] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.380042] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.380066] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.380179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.380184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380187] usb usb2: Product: xHCI Host Controller [ 1.380190] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.380193] usb usb2: SerialNumber: 3530000.xhci [ 1.380473] hub 2-0:1.0: USB hub found [ 1.380498] hub 2-0:1.0: 3 ports detected [ 1.380976] Wake76 for irq=199 [ 1.380979] Wake77 for irq=199 [ 1.380981] Wake78 for irq=199 [ 1.380983] Wake79 for irq=199 [ 1.380985] Wake80 for irq=199 [ 1.380987] Wake81 for irq=199 [ 1.380989] Wake82 for irq=199 [ 1.381016] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.381021] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.381117] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 1.381125] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.381141] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.381757] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.382021] mousedev: PS/2 mouse device common for all mice [ 1.382074] usbcore: registered new interface driver xpad [ 1.484722] usb usb2: usb_suspend_both: status 0 [ 1.500873] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.501899] Wake73 for irq=42 [ 1.503140] rtc rtc1: alarm rtc device [ 1.503152] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.503166] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.503355] i2c /dev entries driver [ 1.505097] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.505416] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.505420] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.505930] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.529288] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.529335] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.536955] imx219 9-0010: board setup failed [ 1.541394] imx219: probe of 9-0010 failed with error -121 [ 1.541692] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.564896] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.564941] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.572617] imx219 10-0010: board setup failed [ 1.577138] imx219: probe of 10-0010 failed with error -121 [ 1.578308] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.582634] parse_throttle_dt_data: Num cap clks = 4 [ 1.582638] parse_throttle_dt_data: clk=mcpu type=1 [ 1.582641] parse_throttle_dt_data: clk=bcpu type=2 [ 1.582648] parse_throttle_dt_data: clk=gpu type=4 [ 1.582651] parse_throttle_dt_data: clk=emc type=3 [ 1.583335] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.584222] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.585221] device-mapper: uevent: version 1.0.3 [ 1.585596] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.585843] CPU EMC frequency mapping table: from device tree [ 1.587765] cpufreq: platform driver Initialization: pass [ 1.588372] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.588491] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.589324] sdhci: Secure Digital Host Controller Interface driver [ 1.589325] sdhci: Copyright(c) Pierre Ossman [ 1.589327] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.589470] sdhci_tegra_parse_dt: cd_gpio: -2 [ 1.590318] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.591871] CMDQ: cmdq_platfm_init successful [ 1.592302] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 1.592343] sdhci_tegra_parse_dt: cd_gpio: 476 [ 1.592795] CQE: CMD_TIMING bit set for R1B DCMD [ 1.592834] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.598011] ledtrig_pe1000n_init start [ 1.598101] ledtrig_pe1000n_init finished [ 1.599348] tegra-se-nvhost 15810000.se: initialized [ 1.600435] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.601017] tegra-se-nvhost 15820000.se: initialized [ 1.601949] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.602382] tegra-se-nvhost 15830000.se: initialized [ 1.603195] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.603604] tegra-se-nvhost 15840000.se: initialized [ 1.604473] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.605196] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.605323] hidraw: raw HID events driver (C) Jiri Kosina [ 1.606230] usbcore: registered new interface driver usbhid [ 1.606232] usbhid: USB HID core driver [ 1.610868] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.612575] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.612869] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.613002] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 1.613656] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 1.613779] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 1.613833] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 1.613888] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 1.614008] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 1.614335] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (49) [ 1.614338] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.614826] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.616394] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.616835] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.617234] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.617547] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.618487] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618490] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 1.618492] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.618564] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618568] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 1.618571] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.618620] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618623] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 1.618625] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.618666] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618668] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 1.618670] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.618710] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618713] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 1.618715] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.618764] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618769] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 1.618771] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.618813] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618818] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 1.618820] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.618860] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618865] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 1.618866] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.618906] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618911] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 1.618913] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.618953] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.618956] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 1.618957] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.619001] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.619007] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 1.619009] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.619049] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.619054] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 1.619056] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.619095] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.619101] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 1.619102] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.619141] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.619147] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 1.619149] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.619188] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.619193] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 1.619194] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.619246] **** A57 ECC: Enabled [ 1.619248] tegra18_a57_serr_init: on CPU 0 a A57 Core [ 1.619312] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.619662] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.620047] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.620158] denver_knobs_init:MTS_VERSION:55941701 [ 1.621579] boardinfo = PE1000N/TX2 [ 1.622130] nvpmodel: initialized successfully [ 1.622870] trusty-virtio trusty:virtio: initializing [ 1.622973] trusty_ipc virtio0: vring0: va(pa) ffffffc0e9d18000(0) qsz 32 notifyid 1 [ 1.622980] trusty_ipc virtio0: vring1: va(pa) ffffffc0e9d1a000(0) qsz 32 notifyid 2 [ 1.623040] trusty-virtio trusty:virtio: initializing done [ 1.623130] trusty_ipc virtio0: is online [ 1.623850] usbcore: registered new interface driver snd-usb-audio [ 1.632577] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.640726] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.647094] OPE platform probe [ 1.647157] OPE platform probe successful [ 1.650676] u32 classifier [ 1.650678] Actions configured [ 1.650738] Initializing XFRM netlink socket [ 1.651358] NET: Registered protocol family 10 [ 1.651906] NET: Registered protocol family 17 [ 1.651916] NET: Registered protocol family 15 [ 1.651973] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.652013] Bluetooth: RFCOMM socket layer initialized [ 1.652019] Bluetooth: RFCOMM ver 1.11 [ 1.652023] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.652026] Bluetooth: HIDP socket layer initialized [ 1.652041] 9pnet: Installing 9P2000 support [ 1.652072] Key type dns_resolver registered [ 1.652333] Registered cp15_barrier emulation handler [ 1.652345] Registered setend emulation handler [ 1.652922] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.655186] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.655443] registered taskstats version 1 [ 1.657997] isp 15600000.isp: initialized [ 1.661184] nvcsi 150c0000.nvcsi: initialized [ 1.662079] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.664512] Wake83 for irq=51 [ 1.664619] gpio tegra-gpio wake1 for gpio=2(A:2) [ 1.664705] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.664832] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.665905] tegra-vi4 15700000.vi: initialized [ 1.666703] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.666782] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.686268] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.697597] tegra_rtc c2a0000.rtc: setting system clock to 2022-07-15 03:13:28 UTC (1657854808) [ 1.701332] mmc0: periodic cache flush enabled [ 1.701341] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.701627] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.704565] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.705780] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.709949] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.710057] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.714652] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.715398] bpmp: mounted debugfs mirror [ 1.716193] bwmgr: missing cdev-type property [ 1.719802] ALSA device list: [ 1.719805] #0: tegra-hda at 0x3518000 irq 382 [ 1.722241] Freeing unused kernel memory: 8448K [ 1.727304] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.727310] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.727313] usb 1-2: Product: USB2.1 Hub [ 1.727315] usb 1-2: Manufacturer: GenesysLogic [ 1.728076] hub 1-2:1.0: USB hub found [ 1.728352] hub 1-2:1.0: 4 ports detected [ 1.728573] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.744098] Root device found: mmcblk0p1 [ 1.745234] Found dev node: /dev/mmcblk0p1 [ 1.763300] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.765101] Rootfs mounted over mmcblk0p1 [ 1.781805] Switching from initrd to actual rootfs [ 1.844967] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 1.867450] usb 2-2: New USB device found, idVendor=05e3, idProduct=0620 [ 1.867455] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.867458] usb 2-2: Product: USB3.1 Hub [ 1.867460] usb 2-2: Manufacturer: GenesysLogic [ 1.869753] hub 2-2:1.0: USB hub found [ 1.870081] hub 2-2:1.0: 4 ports detected [ 1.877152] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.886007] cgroup: cgroup2: unknown option "nsdelegate" [ 1.899609] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.900334] systemd[1]: Detected architecture arm64. [ 1.920407] systemd[1]: Set hostname to . [ 1.984567] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 2.003848] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.003856] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.006168] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 2.006172] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.006175] usb 1-3: Product: USB2.0 Hub [ 2.007009] hub 1-3:1.0: USB hub found [ 2.007319] hub 1-3:1.0: 4 ports detected [ 2.112321] random: systemd: uninitialized urandom read (16 bytes read) [ 2.112583] usb 1-2.3: new low-speed USB device number 4 using tegra-xusb [ 2.113983] systemd[1]: Created slice User and Session Slice. [ 2.114181] random: systemd: uninitialized urandom read (16 bytes read) [ 2.114833] systemd[1]: Created slice System Slice. [ 2.114878] random: systemd: uninitialized urandom read (16 bytes read) [ 2.114895] systemd[1]: Reached target Slices. [ 2.115042] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.115190] systemd[1]: Listening on Syslog Socket. [ 2.136705] usb 1-2.3: New USB device found, idVendor=0461, idProduct=4e84 [ 2.136710] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.136713] usb 1-2.3: Product: USB Optical Mouse [ 2.136715] usb 1-2.3: Manufacturer: PixArt [ 2.138128] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.140159] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.140862] input: PixArt USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:0461:4E84.0001/input/input3 [ 2.141101] hid-generic 0003:0461:4E84.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3530000.xhci-2.3/input0 [ 2.164117] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.190556] random: crng init done [ 2.190561] random: 7 urandom warning(s) missed due to ratelimiting [ 2.216949] usb 2-2.4: new SuperSpeed USB device number 3 using tegra-xusb [ 2.237626] usb 2-2.4: New USB device found, idVendor=0bda, idProduct=8153 [ 2.237633] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 2.237636] usb 2-2.4: Product: USB 10/100/1000 LAN [ 2.237638] usb 2-2.4: Manufacturer: Realtek [ 2.237640] usb 2-2.4: SerialNumber: 001000001 [ 2.246446] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.246452] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.246455] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.246458] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.246462] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.246493] pci 0000:00:03.0: [10de:10e6] type 01 class 0x060400 [ 2.246605] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.246776] iommu: Adding device 0000:00:03.0 to group 54 [ 2.246782] arm-smmu: forcing sodev map for 0000:00:03.0 [ 2.246869] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.247023] pci 0000:01:00.0: [17cb:1103] type 00 class 0x028000 [ 2.247084] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 2.247435] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.247685] iommu: Adding device 0000:01:00.0 to group 55 [ 2.247690] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.256726] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.256774] pci 0000:00:03.0: BAR 14: assigned [mem 0x40200000-0x403fffff] [ 2.256783] pci 0000:01:00.0: BAR 0: assigned [mem 0x40200000-0x403fffff 64bit] [ 2.256816] pci 0000:00:03.0: PCI bridge to [bus 01] [ 2.256825] pci 0000:00:03.0: bridge window [mem 0x40200000-0x403fffff] [ 2.257232] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 2.257236] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.257243] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 2.257335] aer 0000:00:03.0:pcie002: service driver aer loaded [ 2.319980] usb 1-3.3: new full-speed USB device number 5 using tegra-xusb [ 2.337328] usb 1-3.3: New USB device found, idVendor=0cf3, idProduct=e600 [ 2.337333] usb 1-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.377931] systemd-journald[2191]: Received request to flush runtime journal from PID 1 [ 2.633383] usbcore: registered new interface driver r8152 [ 2.713165] usb 2-2.4: reset SuperSpeed USB device number 3 using tegra-xusb [ 2.773321] r8152 2-2.4:1.0 eth0: v2.09.00 (2017/08/21) [ 2.773326] r8152 2-2.4:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.773328] rtl8153 index = 3 [ 3.132126] using random self ethernet address [ 3.144179] using random host ethernet address [ 3.314352] usbcore: registered new interface driver btusb [ 3.696535] Mass Storage Function, version: 2009/09/11 [ 3.696608] LUN: removable file: (no medium) [ 3.719834] using random self ethernet address [ 3.736620] using random host ethernet address [ 3.774370] rndis0: HOST MAC 4a:0c:f7:a3:99:c0 [ 3.774494] rndis0: MAC 4a:0c:f7:a3:99:c1 [ 3.777317] usb0: HOST MAC 4a:0c:f7:a3:99:c2 [ 3.777345] usb0: MAC 4a:0c:f7:a3:99:c3 [ 3.777365] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.778667] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.778689] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.778720] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.779279] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.779291] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.780494] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.780507] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.781222] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.786361] l4tbr0: port 1(rndis0) entered blocking state [ 3.786366] l4tbr0: port 1(rndis0) entered disabled state [ 3.786840] device rndis0 entered promiscuous mode [ 3.799099] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.806373] l4tbr0: port 2(usb0) entered blocking state [ 3.806378] l4tbr0: port 2(usb0) entered disabled state [ 3.806518] device usb0 entered promiscuous mode [ 3.821572] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.929881] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.942390] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.942883] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 69 81 [ 3.942941] Using phyrst_lpmode = 1 from DT [ 3.943094] libphy: dwc_phy: probed [ 3.970440] eqos index = 7 [ 4.008663] bcpu-throttle-alert cooling device registered. [ 4.008937] mcpu-throttle-alert cooling device registered. [ 4.009177] gpu-throttle-alert cooling device registered. [ 4.052384] CAN device driver interface [ 4.056102] CPU1: shutdown [ 4.058955] psci: CPU1 killed (polled 0 ms) [ 4.087043] Message RAM Configuration | base addr |0x0c312000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| [ 4.087241] Release 3.2.0 from 19.12.2014 [ 4.107633] net can0: mttcan device registered (regs=ffffff8008020000, irq=386) [ 4.152401] CPU2: shutdown [ 4.155293] psci: CPU2 killed (polled 0 ms) [ 4.526803] zram: Added device: zram0 [ 4.530274] zram: Added device: zram1 [ 4.533325] zram: Added device: zram2 [ 4.535855] zram: Added device: zram3 [ 4.599140] zram0: detected capacity change from 0 to 501551104 [ 4.677776] Adding 489792k swap on /dev/zram0. Priority:5 extents:1 across:489792k SS [ 4.683218] zram1: detected capacity change from 0 to 501551104 [ 4.706604] Adding 489792k swap on /dev/zram1. Priority:5 extents:1 across:489792k SS [ 4.714648] zram2: detected capacity change from 0 to 501551104 [ 4.747467] Adding 489792k swap on /dev/zram2. Priority:5 extents:1 across:489792k SS [ 4.758543] zram3: detected capacity change from 0 to 501551104 [ 4.789446] Adding 489792k swap on /dev/zram3. Priority:5 extents:1 across:489792k SS [ 4.963791] Bridge firewalling registered [ 4.999742] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.179505] r8152 2-2.4:1.0 rename3: renamed from eth0 [ 5.625621] Netfilter messages via NETLINK v0.30. [ 5.627580] ctnetlink v0.93: registering with nfnetlink. [ 5.645264] tegradc 15200000.nvdisplay: unblank [ 5.645280] tegradc 15210000.nvdisplay: blank - powerdown [ 5.957432] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.212120] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.212132] Bluetooth: BNEP socket layer initialized [ 6.367869] eqos 2490000.ether_qos eth0: renamed from eth1 [ 6.398344] r8152 2-2.4:1.0 eth1: renamed from rename3 [ 6.612759] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.925664] gpio tegra-gpio-aon wake51 for gpio=47(AA:7) [ 6.930429] net eth0: get_configure_l3v4_filter --> [ 6.932267] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.932452] mttcan c310000.mttcan can0: Bitrate set [ 6.932525] mttcan_controller_config: ctrlmode 0 [ 6.932594] mttcan c310000.mttcan can0: Bitrate set [ 6.932644] IPv6: ADDRCONF(NETDEV_UP): can0: link is not ready [ 6.936376] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 6.976714] fuse init (API version 7.26) [ 6.993910] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.010683] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.039989] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 7.040378] r8152 2-2.4:1.0 eth1: carrier on [ 9.925898] tegradc 15200000.nvdisplay: unblank [ 9.925992] tegradc 15210000.nvdisplay: blank - powerdown asus@tegra-ubuntu:~$ [ 33.176440] wlan_cnss_core_pcie: module is from the staging directory, the quality is unknown, you have been warned. [ 33.199545] [enable_bb_ctxt] 0x1000 [ 33.203131] [enable_bb_ctxt] 0x1000 [ 33.207346] cnss: Current L1SS status: 0x0[ 33.211298] cnss: Current ASPM status: 0x41 [ 33.215553] cnss: ASPM status changed to: 40[ 33.219796] rddm size 420000[ 33.222674] IPC_RTR: ipc_router_mhi_xprt_cb: Invalid cb reason 6 [ 33.228713] IPC_RTR: ipc_router_mhi_xprt_cb: Invalid cb reason 6 [ 33.253006] [enable_bb_ctxt] 0x800 [ 33.256530] [enable_bb_ctxt] 0x800 [ 40.213217] wcn6856: module is from the staging directory, the quality is unknown, you have been warned. [ 40.490599] wcn6856: Loading driver v5.2.0.220S.045 +TIMER_MANAGER +MEMORY_DEBUG +PANIC_ON_BUG [ 40.600529] [bhi_probe] jtagid:0x16d0e1 [ 40.633297] patch-1: clear rx-vec, bhi_base as 0x (null)[ 41.396414] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7f66c000, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 41.409546] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7f66c000, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 41.422516] mc-err: unknown mcerr fault, int_status=0x00001040, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 41.433144] mc-err: unknown mcerr fault, int_status=0x00001040, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 41.443733] mc-err: unknown mcerr fault, int_status=0x00001040, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 41.454310] mc-err: unknown mcerr fault, int_status=0x00001040, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 41.464894] mc-err: Too many MC errors; throttling prints [ 41.587815] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000000, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 41.600898] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000000, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 41.921150] irq 66: nobody cared (try booting with the "irqpoll" option) [ 41.927922] handlers: [ 41.930206] [] tegra_mcerr_hard_irq threaded [] tegra_mcerr_thread [ 41.939559] Disabling IRQ #66 [ 41.942988] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e0000c0, fsynr=0x11, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 41.969424] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000140, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 41.991477] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000180, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 42.004473] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000180, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 42.037092] cnss: cnss_fw_ready_hdlr 616 [ 42.058913] [kworke][0x28064e9][03:14:08.879835] wcn6856: [6:E:TXRX] hif_print_hal_shadow_register_cfg: num_config 28 [ 42.070039] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000180, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 42.083012] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x7e000180, fsynr=0x1, cb=20, sid=17(0x11 - AFI), pgd=0, pud=0, pmd=0, pte=0 [ 42.289307] pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID) [ 42.299521] pcieport 0000:00:03.0: device [10de:10e6] error status/mask=00000001/00002000 [ 42.307978] pcieport 0000:00:03.0: [ 0] Receiver Error (First) [ 42.314986] [kworke][0x2844eba][03:14:09.136301] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_cmd_log) [ 42.328197] [kworke][0x284825a][03:14:09.149517] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_cmd_tx_cmp_log) [ 42.342137] [kworke][0x284b8e2][03:14:09.163478] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_mgmt_cmd_log) [ 42.355764] [kworke][0x284ee3f][03:14:09.177138] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_mgmt_cmd_tx_cmp_log) [ 42.369961] [kworke][0x28525c5][03:14:09.191352] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_event_log) [ 42.383375] [kworke][0x2855a3f][03:14:09.204786] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_rx_event_log) [ 42.396866] [kworke][0x2858f0c][03:14:09.218303] wcn6856: [709:E:QDF] __cds_get_context: Module ID 54 context is Null (via wma_print_wmi_mgmt_event_log) [ 52.266630] qmi_send_req_wait: Response Wait Error -110 [ 52.271957] cnss: Failed to send mode request, mode: MISSION(0), err: -110 [ 52.278972] cnss: ASSERT at line 1113 [ 52.282838] ------------[ cut here ]------------ [ 52.287563] WARNING: CPU: 0 PID: 6 at /source/sources/kernel/kernel-4.9/drivers/staging/core_tech_modules/./cnss2/qmi.c:1113 cnss_wlfw_wlan_mode_send_sync+0x134/0x1c8 [wlan_cnss_core_pcie] [ 52.304811] ---[ end trace d883c653a6cab1e9 ]--- [ 52.329084] [kworke][0x31d4804][03:14:19.161592] wcn6856: [6:E:HIF] hif_pci_bus_configure: hif_wlan_enable error: -110 [ 52.340150] [kworke][0x31d734b][03:14:19.172671] wcn6856: [6:E:HIF] hif_pci_bus_configure: Failed, status: -110 [ 52.350408] [kworke][0x31d9b6b][03:14:19.182942] wcn6856: [6:E:HIF] hif_enable: Target probe failed [ 52.359658] [kworke][0x31dbfa1][03:14:19.192212] wcn6856: [6:E:HDD] hdd_hif_open: hif_enable failed status: 16, reinit: 0 [ 52.370777] [kworke][0x31deb18][03:14:19.203338] wcn6856: [6:E:HDD] hdd_wlan_start_modules: Failed to open hif; errno: -1 [ 52.381834] [kworke][0x31e1653][03:14:19.214405] wcn6856: [6:E:HDD] hdd_wlan_startup: Failed to start modules; errno:-1 [ 52.392757] [kworke][0x31e4103][03:14:19.225334] wcn6856: [6:E:HDD] hdd_wlan_startup: Not setting the complete event as fw is down [ 52.404766] [kworke][0x31e6ff7][03:14:19.237354] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_all_objects_per_psoc: Ref counts of PEER [ 52.416855] [kworke][0x31e9f3a][03:14:19.249453] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_all_objects_per_psoc: Ref counts of VDEV [ 52.428966] [kworke][0x31ece66][03:14:19.261529] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_all_objects_per_psoc: Ref counts of PDEV [ 52.441130] [kworke][0x31efe10][03:14:19.273732] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_all_objects_per_psoc: Ref counts of PSOC [ 52.453828] [kworke][0x31f2f14][03:14:19.286450] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_ids: Pending references of object [ 52.465334] [kworke][0x31f5cbf][03:14:19.297970] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_ids: WLAN_OBJMGR_ID -- 1 [ 52.476013] [kworke][0x31f867e][03:14:19.308657] wcn6856: [6:F:OBJMGR] wlan_objmgr_print_ref_ids: WLAN_HDD_ID_OBJ_MGR -- 1 [ 52.507373] [kworke][0x3200116][03:14:19.340041] wcn6856: [6:E:HDD] __hdd_soc_probe: consecutive probe failures:1 [ 52.517719] cnss: Failed to probe host driver, err = -1 [ 52.523727] [fw_paging_dump] to create file:/var/crash/2022-07-15-03-14-19-paging.bin [ 52.532274] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff80011bcf90, size: 0x200 [ 52.546767] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff80136cf000, size: 0x80000 [ 52.559807] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8013751000, size: 0x80000 [ 52.572643] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014af6000, size: 0x80000 [ 52.585534] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014b78000, size: 0x80000 [ 52.598544] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014bfa000, size: 0x80000 [ 52.611477] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014c7c000, size: 0x80000 [ 52.624283] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014cfe000, size: 0x80000 [ 52.637156] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014d80000, size: 0x80000 [ 52.650081] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014e02000, size: 0x80000 [ 52.663070] [fw_paging_dump] to write file:/var/crash/2022-07-15-03-14-19-paging.bin, mem: 0xffffff8014e84000, size: 0x80000 [ 52.744561] [fw_remote_mem_dump] to write file:/var/crash/2022-07-15-03-14-19-remote.bin, mem: 0xffffff7f14f06000, size: 0x690000 [ 52.756384] Unable to handle kernel paging request at virtual address ffffff7f14f06000 [ 52.764340] Mem abort info: [ 52.767155] ESR = 0x96000004 [ 52.770226] Exception class = DABT (current EL), IL = 32 bits [ 52.776172] SET = 0, FnV = 0 [ 52.779258] EA = 0, S1PTW = 0 [ 52.782421] Data abort info: [ 52.785298] ISV = 0, ISS = 0x00000004 [ 52.789152] CM = 0, WnR = 0 [ 52.792140] [ffffff7f14f06000] address between user and kernel address ranges [ 52.799294] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 52.804859] Modules linked in: wcn6856(C) cfg80211 wlan_cnss_core_pcie(C) fuse bnep xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack br_netfilter zram mttcan can_dev userspace_alert eqos ptp_notifier overlay btusb btrtl btbcm btintel r8152 nvgpu ip_tables x_tables [ 52.840461] CPU: 4 PID: 6 Comm: kworker/u12:0 Tainted: G WC 4.9.253-tegra #1 [ 52.848535] Hardware name: ASUS PE1000N/TX2 (DT) [ 52.853218] Workqueue: cnss_driver_event cnss_driver_event_work [wlan_cnss_core_pcie] [ 52.861046] task: ffffffc0f125c600 task.stack: ffffffc0f1340000 [ 52.866959] PC is at __memcpy+0x100/0x180 [ 52.870963] LR is at iov_iter_copy_from_user_atomic+0x2a4/0x3a8 [ 52.876871] pc : [] lr : [] pstate: 20400045 [ 52.884251] sp : ffffffc0f1343810 [ 52.887557] x29: ffffffc0f1343810 x28: ffffffc0f1343a28 [ 52.892880] x27: 0000000000001000 x26: 0000000000001000 [ 52.898203] x25: 0000000000000000 x24: ffffffc0e201b700 [ 52.903525] x23: ffffffc0f13439f0 x22: 0000000000000000 [ 52.908848] x21: ffffffc0f125c600 x20: ffffffc087322000 [ 52.914169] x19: 0000000000000000 x18: 0000000000001800 [ 52.919491] x17: 0000000000000000 x16: 0000000000000000 [ 52.924813] x15: 0000000000001c00 x14: 0000000000001000 [ 52.930135] x13: 0000000000000c00 x12: 0000000000000800 [ 52.935456] x11: 0000000000000400 x10: 0000000000000040 [ 52.940778] x9 : ffffffc0f0c285b0 x8 : ffffffc0a7525900 [ 52.946101] x7 : 0000000000000000 x6 : ffffffc087321000 [ 52.951423] x5 : ffffffc0ef6a4248 x4 : 0000000000000000 [ 52.956747] x3 : 0000000000001000 x2 : 0000000000000f80 [ 52.962069] x1 : ffffff7f14f06000 x0 : ffffffc087321000 [ 52.967392] [ 52.968879] Process kworker/u12:0 (pid: 6, stack limit = 0xffffffc0f1340000) [ 52.975912] Call trace: [ 52.978356] [] __memcpy+0x100/0x180 [ 52.983402] [] generic_perform_write+0xe0/0x190 [ 52.989486] [] __generic_file_write_iter+0xfc/0x1c0 [ 52.995916] [] ext4_file_write_iter+0x268/0x358 [ 53.002002] [] __vfs_write+0xd0/0x118 [ 53.007215] [] vfs_write+0xac/0x1b0 [ 53.012324] [] fw_remote_mem_dump+0xe8/0x1c8 [wlan_cnss_core_pcie] [ 53.020119] [] dump_fw_to_file+0x12c/0x8a8 [wlan_cnss_core_pcie] [ 53.027740] [] bhi_rddm+0x134/0x4d0 [wlan_cnss_core_pcie] [ 53.034755] [] mhi_pm_control_device+0x444/0x624 [wlan_cnss_core_pcie] [ 53.042894] [] cnss_pci_set_mhi_state+0x13c/0x2b0 [wlan_cnss_core_pcie] [ 53.051123] [] cnss_bus_collect_dump_info+0x30/0x80 [wlan_cnss_core_pcie] [ 53.059523] [] cnss_driver_event_work+0x574/0x69c [wlan_cnss_core_pcie] [ 53.067690] [] process_one_work+0x1e4/0x4b0 [ 53.073426] [] worker_thread+0x50/0x4c8 [ 53.078813] [] kthread+0xec/0xf0 [ 53.083596] [] ret_from_fork+0x10/0x30 [ 53.088899] ---[ end trace d883c653a6cab1ea ]--- [ 53.100402] note: kworker/u12:0[6] exited with preempt_count 1 [ 53.106388] Unable to handle kernel paging request at virtual address ffffffffffffffd8 [ 53.114294] Mem abort info: [ 53.117080] ESR = 0x96000005 [ 53.120129] Exception class = DABT (current EL), IL = 32 bits [ 53.126035] SET = 0, FnV = 0 [ 53.129082] EA = 0, S1PTW = 0 [ 53.132215] Data abort info: [ 53.135086] ISV = 0, ISS = 0x00000005 [ 53.138912] CM = 0, WnR = 0 [ 53.141874] swapper pgtable: 4k pages, 39-bit VAs, pgd = ffffff800a0c0000 [ 53.148647] [ffffffffffffffd8] *pgd=0000000000000000, *pud=0000000000000000 [ 53.155620] Internal error: Oops: 96000005 [#2] PREEMPT SMP [ 53.161180] Modules linked in: wcn6856(C) cfg80211 wlan_cnss_core_pcie(C) fuse bnep xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack br_netfilter zram mttcan can_dev userspace_alert eqos ptp_notifier overlay btusb btrtl btbcm btintel r8152 nvgpu ip_tables x_tables [ 53.196776] CPU: 4 PID: 6 Comm: kworker/u12:0 Tainted: G D WC 4.9.253-tegra #1 [ 53.204850] Hardware name: ASUS PE1000N/TX2 (DT) [ 53.209461] task: ffffffc0f125c600 task.stack: ffffffc0f1340000 [ 53.215372] PC is at kthread_data+0x24/0x30 [ 53.219547] LR is at wq_worker_sleeping+0x20/0xd0 [ 53.224240] pc : [] lr : [] pstate: 804000c5 [ 53.231620] sp : ffffffc0f1343440 [ 53.234926] x29: ffffffc0f1343440 x28: ffffffc0f125c600 [ 53.240250] x27: ffffffc0f1258000 x26: 0000000000000000 [ 53.245572] x25: ffffff80080eaf34 x24: ffffffc0f66f2d80 [ 53.250896] x23: ffffffc0f125ccb0 x22: ffffff8009733000 [ 53.256218] x21: ffffff8009d58000 x20: ffffff800973f000 [ 53.261541] x19: ffffffc0f125c600 x18: 00000000fffffff3 [ 53.266860] x17: 0000000000000004 x16: 0000000000000000 [ 53.272181] x15: 0000000000000033 x14: ffffffc0e9857b88 [ 53.277503] x13: ffffffc0e2bd50b8 x12: 0000000000000018 [ 53.282825] x11: 0000000000000003 x10: 0000000000000001 [ 53.288146] x9 : ffffffc0f1343360 x8 : 0000000002190459 [ 53.293466] x7 : 0000000000000000 x6 : 00000000000002f0 [ 53.298786] x5 : 00000000000002f0 x4 : 0000000002190525 [ 53.304109] x3 : 0000000000000000 x2 : 00000015bd8b5b71 [ 53.309431] x1 : ffffffc0f66f2d80 x0 : 0000000000000000 [ 53.314750] [ 53.316237] Process kworker/u12:0 (pid: 6, stack limit = 0xffffffc0f1340000) [ 53.323269] Call trace: [ 53.325710] [] kthread_data+0x24/0x30 [ 53.330926] [] __schedule+0x3e0/0x7d0 [ 53.336141] [] do_task_dead+0x74/0x78 [ 53.341356] [] do_exit+0x710/0xa88 [ 53.346311] [] die+0x194/0x198 [ 53.350920] [] __do_kernel_fault+0x144/0x218 [ 53.356741] [] do_bad_area+0x44/0x90 [ 53.361869] [] do_translation_fault+0x54/0x80 [ 53.367777] [] do_mem_abort+0x54/0xb0 [ 53.372990] [] el1_da+0x24/0xbc [ 53.377687] [] generic_perform_write+0xe0/0x190 [ 53.383767] [] __generic_file_write_iter+0xfc/0x1c0 [ 53.390196] [] ext4_file_write_iter+0x268/0x358 [ 53.396278] [] __vfs_write+0xd0/0x118 [ 53.401491] [] vfs_write+0xac/0x1b0 [ 53.406599] [] fw_remote_mem_dump+0xe8/0x1c8 [wlan_cnss_core_pcie] [ 53.414386] [] dump_fw_to_file+0x12c/0x8a8 [wlan_cnss_core_pcie] [ 53.421994] [] bhi_rddm+0x134/0x4d0 [wlan_cnss_core_pcie] [ 53.428998] [] mhi_pm_control_device+0x444/0x624 [wlan_cnss_core_pcie] [ 53.437127] [] cnss_pci_set_mhi_state+0x13c/0x2b0 [wlan_cnss_core_pcie] [ 53.445343] [] cnss_bus_collect_dump_info+0x30/0x80 [wlan_cnss_core_pcie] [ 53.453733] [] cnss_driver_event_work+0x574/0x69c [wlan_cnss_core_pcie] [ 53.461895] [] process_one_work+0x1e4/0x4b0 [ 53.467629] [] worker_thread+0x50/0x4c8 [ 53.473016] [] kthread+0xec/0xf0 [ 53.477796] [] ret_from_fork+0x10/0x30 [ 53.483097] ---[ end trace d883c653a6cab1eb ]--- [ 53.494848] note: kworker/u12:0[6] exited with preempt_count 2 [ 53.500670] Fixing recursive fault but reboot is needed!