user@user:~/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra$ sudo ./flash.sh -r -d kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb -K kernel/Image jetson-tx2 mmcblk0p1
[sudo] password for user: 
###############################################################################
# L4T BSP Information:
# R28 (release), REVISION: 2.1, GCID: 11272647, BOARD: t186ref, EABI: aarch64, 
# DATE: Thu May 17 07:29:06 UTC 2018
###############################################################################
# Target Board Information:
# Name: jetson-tx2, Board Family: t186ref, SoC: Tegra 186, 
# OpMode: production, Boot Authentication: , 
###############################################################################
./tegraflash.py --chip 0x18 --applet "/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_recovery_prod.bin" --cmd "dump eeprom boardinfo cvm.bin" --skipuid 
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands
 
[   0.0260 ] Generating RCM messages
[   0.0316 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 --download rcm /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_recovery_prod.bin 0 0
[   0.0340 ] RCM 0 is saved as rcm_0.rcm
[   0.0704 ] RCM 1 is saved as rcm_1.rcm
[   0.0704 ] List of rcm files are saved in rcm_list.xml
[   0.0704 ] 
[   0.0704 ] Signing RCM messages
[   0.0951 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key
[   0.0981 ] Assuming zero filled SBK key
[   0.1198 ] 
[   0.1199 ] Copying signature to RCM mesages
[   0.1218 ] tegrarcm_v2 --chip 0x18 --updatesig rcm_list_signed.xml
[   0.1235 ] 
[   0.1236 ] Boot Rom communication
[   0.1253 ] tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xml --skipuid
[   0.1268 ] RCM version 0X180001
[   0.2514 ] Boot Rom communication completed
[   1.2585 ] 
[   1.2609 ] tegrarcm_v2 --isapplet
[   1.2629 ] Applet version 01.00.0000
[   1.4417 ] 
[   1.4433 ] Retrieving EEPROM data
[   1.4434 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/cvm.bin
[   1.4466 ] Applet version 01.00.0000
[   1.6499 ] Saved platform info in /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/cvm.bin
[   1.7302 ] 
Board ID(3310) version(B02) 
copying bctfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg)... done.
copying misc_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-misc-si-l4t.cfg)... done.
copying pinmux_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg)... done.
copying pmic_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg)... done.
copying pmc_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg)... done.
copying prod_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg)... done.
copying scr_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/minimal_scr.cfg)... done.
copying scr_cold_boot_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/mobile_scr.cfg)... done.
copying bootrom_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg)... done.
copying dev_params(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/emmc.cfg)... done.
Existing bootloader(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/nvtboot_cpu.bin) reused.
Making Boot image... done.
Existing sosfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_recovery_prod.bin) reused.
copying tegraboot(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/nvtboot.bin)... done.
Existing mb2blfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/nvtboot_recovery.bin) reused.
Existing mtspreboot(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/preboot_d15_prod_cr.bin) reused.
Existing mts(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mce_mts_d15_prod_cr.bin) reused.
Existing mb1file(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_prod.bin) reused.
Existing bpffile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/bpmp.bin) reused.
copying bpfdtbfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb)... done.
Existing scefile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/camera-rtcpu-sce.bin) reused.
Existing spefile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/spe.bin) reused.
copying wb0boot(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/warmboot.bin)... done.
Existing tosfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/tos.img) reused.
Existing eksfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/eks.img) reused.
copying dtbfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done.
Reusing existing system.img... 
done.
Existing tbcfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/cboot.bin) reused.
copying tbcdtbfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done.
copying cfgfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/cfg/flash_l4t_t186.xml) to flash.xml... done.
Existing flasher(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/nvtboot_recovery_cpu.bin) reused.
Existing flashapp(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/tegraflash.py) reused.
./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x7090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot"  --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg  --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb"  
saving flash command in /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/flashcmd.txt
./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x7090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot"  --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg  --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb"  
copying boot image (boot.img.sb)... done.
copying partition layout (flash.xml.sb)... done.
copying kernel dtb (tegra186-quill-p3310-1000-c03-00-base.dtb.sb)... done.
saving flash parameters in /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/flash_parameters.txt
--bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x7090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot"  --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg  --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb"  
*** Flashing target device started. ***
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands
 
[   0.0017 ] tegrasign_v2 --key None --getmode mode.txt
[   0.0031 ] Assuming zero filled SBK key
[   0.0033 ] 
[   0.0033 ] Generating RCM messages
[   0.0047 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 --download rcm mb1_recovery_prod.bin 0 0
[   0.0061 ] RCM 0 is saved as rcm_0.rcm
[   0.0066 ] RCM 1 is saved as rcm_1.rcm
[   0.0066 ] List of rcm files are saved in rcm_list.xml
[   0.0067 ] 
[   0.0067 ] Signing RCM messages
[   0.0080 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key
[   0.0093 ] Assuming zero filled SBK key
[   0.0152 ] 
[   0.0153 ] Copying signature to RCM mesages
[   0.0165 ] tegrarcm_v2 --chip 0x18 --updatesig rcm_list_signed.xml
[   0.0180 ] 
[   0.0181 ] Parsing partition layout
[   0.0434 ] tegraparser_v2 --pt flash.xml.tmp
[   0.0648 ] 
[   0.0649 ] Creating list of images to be signed
[   0.0793 ] tegrahost_v2 --chip 0x18 --partitionlayout flash.xml.bin --list images_list.xml zerosbk
[   0.4326 ] 
[   0.4327 ] Generating signatures
[   0.4348 ] tegrasign_v2 --key None --list images_list.xml --pubkeyhash pub_key.key
[   0.4367 ] Assuming zero filled SBK key
[   2.1784 ] 
[   2.1785 ] Generating br-bct
[   2.2285 ] Updating dev and MSS params in BR BCT
[   2.2287 ] tegrabct_v2 --dev_param emmc.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --brbct br_bct.cfg --chip 0x18
[   2.2942 ] 
[   2.2943 ] Updating bl info
[   2.2955 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml
[   2.2979 ] 
[   2.2979 ] Updating smd info
[   2.2992 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatesmdinfo flash.xml.bin
[   2.3008 ] 
[   2.3009 ] Updating Odmdata
[   2.3022 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatefields Odmdata =0x7090000
[   2.3039 ] 
[   2.3039 ] Get Signed section bct
[   2.3052 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --listbct bct_list.xml
[   2.3068 ] 
[   2.3069 ] Signing BCT
[   2.3093 ] tegrasign_v2 --key None --list bct_list.xml --pubkeyhash pub_key.key
[   2.3108 ] Assuming zero filled SBK key
[   2.3113 ] 
[   2.3113 ] Updating BCT with signature
[   2.3127 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatesig bct_list_signed.xml
[   2.3142 ] 
[   2.3143 ] Generating coldboot mb1-bct
[   2.3155 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr mobile_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg
[   2.3164 ] MB1-BCT version: 0xe
[   2.3167 ] Copying Sdram info from 2 to 3 set
[   2.3396 ] Packing sdram param for instance[0]
[   2.3400 ] Packing sdram param for instance[1]
[   2.3404 ] Packing sdram param for instance[2]
[   2.3409 ] Packing sdram param for instance[3]

[   2.3413 ] Parsing config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg 
[   2.3422 ] Appending platform config data of size :- 2904
[   2.3426 ] 
[   2.3426 ] Parsing config file :mobile_scr.cfg 
[   2.3426 ] Appending platform config data of size :- 12240
[   2.3426 ] 
[   2.3427 ] Parsing config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg 
[   2.3427 ] Appending platform config data of size :- 24
[   2.3427 ] 
[   2.3427 ] Parsing config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg 
[   2.3427 ] Appending platform config data of size :- 708
[   2.3427 ] 
[   2.3427 ] Parsing config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg 
[   2.3428 ] Appending platform config data of size :- 64
[   2.3428 ] 
[   2.3428 ] Parsing config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg 
[   2.3428 ] Appending platform config data of size :- 1652
[   2.3428 ] 
[   2.3429 ] Updating mb1-bct with firmware information
[   2.3440 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin
[   2.3449 ] MB1-BCT version: 0xe
[   2.3660 ] 
[   2.3660 ] Updating mb1-bct with storage information
[   2.3674 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatestorageinfo flash.xml.bin
[   2.3690 ] MB1-BCT version: 0xe
[   2.3699 ] 
[   2.3714 ] tegrahost_v2 --align mb1_cold_boot_bct_MB1.bct
[   2.3731 ] 
[   2.3748 ] tegrahost_v2 --appendsigheader mb1_cold_boot_bct_MB1.bct zerosbk
[   2.3766 ] 
[   2.3786 ] tegrasign_v2 --key None --list mb1_cold_boot_bct_MB1_sigheader.bct_list.xml
[   2.3798 ] Assuming zero filled SBK key
[   2.3820 ] 
[   2.3838 ] tegrahost_v2 --updatesigheader mb1_cold_boot_bct_MB1_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_sigheader.bct.hash zerosbk
[   2.3852 ] 
[   2.3853 ] Generating recovery mb1-bct
[   2.3865 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr minimal_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg
[   2.3878 ] MB1-BCT version: 0xe
[   2.3881 ] Copying Sdram info from 2 to 3 set
[   2.4108 ] Packing sdram param for instance[0]
[   2.4112 ] Packing sdram param for instance[1]
[   2.4116 ] Packing sdram param for instance[2]
[   2.4121 ] Packing sdram param for instance[3]

[   2.4125 ] Parsing config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg 
[   2.4134 ] Appending platform config data of size :- 2904
[   2.4137 ] 
[   2.4137 ] Parsing config file :minimal_scr.cfg 
[   2.4137 ] Appending platform config data of size :- 12240
[   2.4137 ] 
[   2.4138 ] Parsing config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg 
[   2.4138 ] Appending platform config data of size :- 24
[   2.4138 ] 
[   2.4138 ] Parsing config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg 
[   2.4139 ] Appending platform config data of size :- 708
[   2.4139 ] 
[   2.4139 ] Parsing config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg 
[   2.4140 ] Appending platform config data of size :- 64
[   2.4140 ] 
[   2.4140 ] Parsing config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg 
[   2.4140 ] Appending platform config data of size :- 1652
[   2.4140 ] 
[   2.4141 ] Updating mb1-bct with firmware information
[   2.4154 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatefwinfo flash.xml.bin
[   2.4164 ] MB1-BCT version: 0xe
[   2.4171 ] 
[   2.4171 ] Updating mb1-bct with storage information
[   2.4181 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatestorageinfo flash.xml.bin
[   2.4192 ] MB1-BCT version: 0xe
[   2.4199 ] 
[   2.4211 ] tegrahost_v2 --align mb1_bct_MB1.bct
[   2.4224 ] 
[   2.4234 ] tegrahost_v2 --appendsigheader mb1_bct_MB1.bct zerosbk
[   2.4249 ] 
[   2.4265 ] tegrasign_v2 --key None --list mb1_bct_MB1_sigheader.bct_list.xml
[   2.4277 ] Assuming zero filled SBK key
[   2.4299 ] 
[   2.4316 ] tegrahost_v2 --updatesigheader mb1_bct_MB1_sigheader.bct.encrypt mb1_bct_MB1_sigheader.bct.hash zerosbk
[   2.4329 ] 
[   2.4330 ] Copying signatures
[   2.4343 ] tegrahost_v2 --chip 0x18 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml
[   4.0173 ] 
[   4.0175 ] Boot Rom communication
[   4.0194 ] tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xml
[   4.0210 ] BootRom is not running
[   5.1056 ] 
[   5.1080 ] tegrarcm_v2 --isapplet
[   5.1099 ] Applet version 01.00.0000
[   5.3449 ] 
[   5.3450 ] Retrieving board information
[   5.3472 ] tegrarcm_v2 --oem platformdetails chip chip_info.bin
[   5.3492 ] Applet version 01.00.0000
[   5.5321 ] Saved platform info in chip_info.bin
[   5.5345 ] Chip minor revision: 2
[   5.5359 ] 
[   5.5360 ] Sending BCTs
[   5.5382 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
[   5.5402 ] Applet version 01.00.0000
[   5.7396 ] Sending bct_bootrom
[   5.7400 ] [................................................] 100%
[   5.7510 ] Sending bct_mb1
[   5.7577 ] [................................................] 100%
[   6.1068 ] 
[   6.1069 ] Generating blob
[   6.1095 ] tegrahost_v2 --align blob_nvtboot_recovery_cpu.bin
[   6.1117 ] 
[   6.1137 ] tegrahost_v2 --appendsigheader blob_nvtboot_recovery_cpu.bin zerosbk
[   6.1165 ] 
[   6.1180 ] tegrasign_v2 --key None --list blob_nvtboot_recovery_cpu_sigheader.bin_list.xml
[   6.1196 ] Assuming zero filled SBK key
[   6.1295 ] 
[   6.1319 ] tegrahost_v2 --updatesigheader blob_nvtboot_recovery_cpu_sigheader.bin.encrypt blob_nvtboot_recovery_cpu_sigheader.bin.hash zerosbk
[   6.1334 ] 
[   6.1358 ] tegrahost_v2 --align blob_nvtboot_recovery.bin
[   6.1371 ] 
[   6.1389 ] tegrahost_v2 --appendsigheader blob_nvtboot_recovery.bin zerosbk
[   6.1403 ] 
[   6.1421 ] tegrasign_v2 --key None --list blob_nvtboot_recovery_sigheader.bin_list.xml
[   6.1432 ] Assuming zero filled SBK key
[   6.1463 ] 
[   6.1483 ] tegrahost_v2 --updatesigheader blob_nvtboot_recovery_sigheader.bin.encrypt blob_nvtboot_recovery_sigheader.bin.hash zerosbk
[   6.1499 ] 
[   6.1515 ] tegrahost_v2 --align blob_preboot_d15_prod_cr.bin
[   6.1530 ] 
[   6.1545 ] tegrahost_v2 --appendsigheader blob_preboot_d15_prod_cr.bin zerosbk
[   6.1561 ] 
[   6.1579 ] tegrasign_v2 --key None --list blob_preboot_d15_prod_cr_sigheader.bin_list.xml
[   6.1592 ] Assuming zero filled SBK key
[   6.1622 ] 
[   6.1642 ] tegrahost_v2 --updatesigheader blob_preboot_d15_prod_cr_sigheader.bin.encrypt blob_preboot_d15_prod_cr_sigheader.bin.hash zerosbk
[   6.1660 ] 
[   6.1679 ] tegrahost_v2 --align blob_mce_mts_d15_prod_cr.bin
[   6.1708 ] 
[   6.1725 ] tegrahost_v2 --appendsigheader blob_mce_mts_d15_prod_cr.bin zerosbk
[   6.1795 ] 
[   6.1816 ] tegrasign_v2 --key None --list blob_mce_mts_d15_prod_cr_sigheader.bin_list.xml
[   6.1830 ] Assuming zero filled SBK key
[   6.2472 ] 
[   6.2490 ] tegrahost_v2 --updatesigheader blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt blob_mce_mts_d15_prod_cr_sigheader.bin.hash zerosbk
[   6.2532 ] 
[   6.2552 ] tegrahost_v2 --align blob_bpmp.bin
[   6.2563 ] 
[   6.2575 ] tegrahost_v2 --appendsigheader blob_bpmp.bin zerosbk
[   6.2605 ] 
[   6.2626 ] tegrasign_v2 --key None --list blob_bpmp_sigheader.bin_list.xml
[   6.2641 ] Assuming zero filled SBK key
[   6.2848 ] 
[   6.2867 ] tegrahost_v2 --updatesigheader blob_bpmp_sigheader.bin.encrypt blob_bpmp_sigheader.bin.hash zerosbk
[   6.2885 ] 
[   6.2900 ] tegrahost_v2 --align blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb
[   6.2910 ] 
[   6.2921 ] tegrahost_v2 --appendsigheader blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb zerosbk
[   6.2939 ] 
[   6.2955 ] tegrasign_v2 --key None --list blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb_list.xml
[   6.2964 ] Assuming zero filled SBK key
[   6.3142 ] 
[   6.3159 ] tegrahost_v2 --updatesigheader blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.hash zerosbk
[   6.3179 ] 
[   6.3194 ] tegrahost_v2 --align blob_tos.img
[   6.3207 ] 
[   6.3218 ] tegrahost_v2 --appendsigheader blob_tos.img zerosbk
[   6.3229 ] 
[   6.3242 ] tegrasign_v2 --key None --list blob_tos_sigheader.img_list.xml
[   6.3251 ] Assuming zero filled SBK key
[   6.3275 ] 
[   6.3292 ] tegrahost_v2 --updatesigheader blob_tos_sigheader.img.encrypt blob_tos_sigheader.img.hash zerosbk
[   6.3308 ] 
[   6.3321 ] tegrahost_v2 --align blob_eks.img
[   6.3331 ] 
[   6.3342 ] tegrahost_v2 --appendsigheader blob_eks.img zerosbk
[   6.3353 ] 
[   6.3366 ] tegrasign_v2 --key None --list blob_eks_sigheader.img_list.xml
[   6.3375 ] Assuming zero filled SBK key
[   6.3379 ] 
[   6.3397 ] tegrahost_v2 --updatesigheader blob_eks_sigheader.img.encrypt blob_eks_sigheader.img.hash zerosbk
[   6.3410 ] 
[   6.3426 ] tegrahost_v2 --align blob_tegra186-quill-p3310-1000-c03-00-base.dtb
[   6.3444 ] 
[   6.3458 ] tegrahost_v2 --appendsigheader blob_tegra186-quill-p3310-1000-c03-00-base.dtb zerosbk
[   6.3476 ] 
[   6.3489 ] tegrasign_v2 --key None --list blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb_list.xml
[   6.3503 ] Assuming zero filled SBK key
[   6.3617 ] 
[   6.3634 ] tegrahost_v2 --updatesigheader blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.hash zerosbk
[   6.3649 ] 
[   6.3667 ] tegrahost_v2 --generateblob blob.xml blob.bin
[   6.3677 ] number of images in blob are 9
[   6.3681 ] blobsize is 3748296
[   6.3684 ] Added binary blob_nvtboot_recovery_cpu_sigheader.bin.encrypt of size 190048
[   6.3702 ] Added binary blob_nvtboot_recovery_sigheader.bin.encrypt of size 79600
[   6.3709 ] Added binary blob_preboot_d15_prod_cr_sigheader.bin.encrypt of size 63024
[   6.3716 ] Added binary blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt of size 2076832
[   6.3723 ] Added binary blob_bpmp_sigheader.bin.encrypt of size 529440
[   6.3726 ] Added binary blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt of size 466160
[   6.3735 ] Added binary blob_tos_sigheader.img.encrypt of size 62976
[   6.3742 ] Added binary blob_eks_sigheader.img.encrypt of size 1488
[   6.3746 ] Added binary blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt of size 278576
[   6.3755 ] 
[   6.3756 ] Sending bootloader and pre-requisite binaries
[   6.3768 ] tegrarcm_v2 --download blob blob.bin
[   6.3779 ] Applet version 01.00.0000
[   6.6485 ] Sending blob
[   6.6490 ] [................................................] 100%
[   7.0863 ] 
[   7.0883 ] tegrarcm_v2 --boot recovery
[   7.0902 ] Applet version 01.00.0000
[   7.3615 ] 
[   7.3637 ] tegrarcm_v2 --isapplet
[   8.0382 ] 
[   8.0919 ] tegradevflash_v2 --iscpubl
[   8.0942 ] CPU Bootloader is not running on device.
[   8.2323 ] 
[   9.5422 ] Retrieving storage infomation
[   9.5441 ] tegrarcm_v2 --oem platformdetails storage storage_info.bin
[   9.5452 ] Applet is not running on device. Continue with Bootloader
[   9.7555 ] 
[   9.7579 ] tegradevflash_v2 --oem platformdetails storage storage_info.bin
[   9.7599 ] Bootloader version 01.00.0000
[   9.9008 ] Saved platform info in storage_info.bin
[   9.9073 ] 
[   9.9074 ] Flashing the device
[   9.9095 ] tegraparser_v2 --storageinfo storage_info.bin --generategpt --pt flash.xml.bin
[   9.9139 ] 
[   9.9162 ] tegradevflash_v2 --pt flash.xml.bin --create
[   9.9195 ] Bootloader version 01.00.0000
[  10.0490 ] Erasing sdmmc_boot: 3 ......... [Done]
[  10.0935 ] Writing partition secondary_gpt with gpt_secondary_0_3.bin
[  10.0949 ] [................................................] 100%

[  10.1572 ] Erasing sdmmc_user: 3 ......... [Done]
[  12.4423 ] Writing partition master_boot_record with mbr_1_3.bin
[  12.4437 ] [................................................] 100%
[  12.4530 ] Writing partition primary_gpt with gpt_primary_1_3.bin
[  12.4645 ] [................................................] 100%
[  12.4736 ] Writing partition secondary_gpt with gpt_secondary_1_3.bin
[  12.4909 ] [................................................] 100%

[  12.5168 ] Writing partition mb1 with mb1_prod.bin.encrypt
[  12.5180 ] [................................................] 100%
[  12.5320 ] Writing partition mb1_b with mb1_prod.bin.encrypt
[  12.5572 ] [................................................] 100%
[  12.5697 ] Writing partition spe-fw with spe_sigheader.bin.encrypt
[  12.5979 ] [................................................] 100%
[  12.6101 ] Writing partition spe-fw_b with spe_sigheader.bin.encrypt
[  12.6246 ] [................................................] 100%
[  12.6372 ] Writing partition mb2 with nvtboot_sigheader.bin.encrypt
[  12.6461 ] [................................................] 100%
[  12.6584 ] Writing partition mb2_b with nvtboot_sigheader.bin.encrypt
[  12.7016 ] [................................................] 100%
[  12.7151 ] Writing partition mts-preboot with preboot_d15_prod_cr_sigheader.bin.encrypt
[  12.7651 ] [................................................] 100%
[  12.7765 ] Writing partition mts-preboot_b with preboot_d15_prod_cr_sigheader.bin.encrypt
[  12.8242 ] [................................................] 100%
[  12.8361 ] Writing partition SMD with slot_metadata.bin
[  12.8941 ] [................................................] 100%
[  12.9030 ] Writing partition SMD_b with slot_metadata.bin
[  12.9135 ] [................................................] 100%
[  12.9232 ] Writing partition master_boot_record with mbr_1_3.bin
[  12.9752 ] [................................................] 100%
[  12.9844 ] Writing partition APP with system.img
[  12.9894 ] [................................................] 100%
[ 181.2544 ] Writing partition mts-bootpack with mce_mts_d15_prod_cr_sigheader.bin.encrypt
[ 181.2687 ] [................................................] 100%
[ 181.4030 ] Writing partition mts-bootpack_b with mce_mts_d15_prod_cr_sigheader.bin.encrypt
[ 181.4220 ] [................................................] 100%
[ 181.5141 ] Writing partition cpu-bootloader with cboot_sigheader.bin.encrypt
[ 181.5356 ] [................................................] 100%
[ 181.5868 ] Writing partition cpu-bootloader_b with cboot_sigheader.bin.encrypt
[ 181.5960 ] [................................................] 100%
[ 181.6161 ] Writing partition bootloader-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt
[ 181.6258 ] [................................................] 100%
[ 181.6607 ] Writing partition bootloader-dtb_b with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt
[ 181.6714 ] [................................................] 100%
[ 181.6906 ] Writing partition secure-os with tos_sigheader.img.encrypt
[ 181.6999 ] [................................................] 100%
[ 181.7210 ] Writing partition secure-os_b with tos_sigheader.img.encrypt
[ 181.7282 ] [................................................] 100%
[ 181.7413 ] Writing partition eks with eks_sigheader.img.encrypt
[ 181.7474 ] [................................................] 100%
[ 181.7577 ] Writing partition bpmp-fw with bpmp_sigheader.bin.encrypt
[ 181.7632 ] [................................................] 100%
[ 181.8045 ] Writing partition bpmp-fw_b with bpmp_sigheader.bin.encrypt
[ 181.8187 ] [................................................] 100%
[ 181.8462 ] Writing partition bpmp-fw-dtb with tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt
[ 181.8606 ] [................................................] 100%
[ 181.8919 ] Writing partition bpmp-fw-dtb_b with tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt
[ 181.9053 ] [................................................] 100%
[ 181.9298 ] Writing partition sce-fw with camera-rtcpu-sce_sigheader.bin.encrypt
[ 181.9407 ] [................................................] 100%
[ 181.9630 ] Writing partition sce-fw_b with camera-rtcpu-sce_sigheader.bin.encrypt
[ 181.9705 ] [................................................] 100%
[ 181.9832 ] Writing partition sc7 with warmboot_wbheader.bin.encrypt
[ 181.9908 ] [................................................] 100%
[ 182.0020 ] Writing partition sc7_b with warmboot_wbheader.bin.encrypt
[ 182.0076 ] [................................................] 100%
[ 182.0181 ] Writing partition BMP with bmp.blob
[ 182.0378 ] [................................................] 100%
[ 182.5468 ] Writing partition BMP_b with bmp.blob
[ 182.5592 ] [................................................] 100%
[ 183.0226 ] Writing partition kernel with boot_sigheader.img.encrypt
[ 183.0345 ] [................................................] 100%
[ 184.0735 ] Writing partition kernel_b with boot_sigheader.img.encrypt
[ 184.0863 ] [................................................] 100%
[ 185.0346 ] Writing partition kernel-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt
[ 185.0542 ] [................................................] 100%
[ 185.0733 ] Writing partition kernel-dtb_b with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt
[ 185.0823 ] [................................................] 100%
[ 185.1108 ] 
[ 185.1323 ] tegradevflash_v2 --write BCT br_bct_BR.bct
[ 185.1343 ] Bootloader version 01.00.0000
[ 185.2650 ] Writing partition BCT with br_bct_BR.bct
[ 185.2663 ] [................................................] 100%
[ 185.3489 ] 
[ 185.3747 ] tegradevflash_v2 --write MB1_BCT mb1_cold_boot_bct_MB1_sigheader.bct.encrypt
[ 185.3759 ] Bootloader version 01.00.0000
[ 185.4486 ] Writing partition MB1_BCT with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt
[ 185.4509 ] [................................................] 100%
[ 185.5406 ] 
[ 185.5433 ] tegradevflash_v2 --write MB1_BCT_b mb1_cold_boot_bct_MB1_sigheader.bct.encrypt
[ 185.5456 ] Bootloader version 01.00.0000
[ 185.6208 ] Writing partition MB1_BCT_b with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt
[ 185.6231 ] [................................................] 100%
[ 185.6870 ] 
[ 185.6871 ] Flashing completed

[ 185.6872 ] Coldbooting the device
[ 185.6897 ] tegradevflash_v2 --reboot coldboot
[ 185.6911 ] Bootloader version 01.00.0000
[ 185.7689 ] 
*** The target t186ref has been flashed successfully. ***
Reset the board to boot from internal eMMC.

user@user:~/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra$