Ubuntu 18.04.6 LTS ubuntu ttyS0 ubuntu login: Ubuntu 18.04.6 LTS ubuntu ttyS0 ubuntu login: [ 7443.964379] Unable to handle kernel read from unreadable memory at virtual address 00000008 [ 7443.972717] Mem abort info: [ 7443.975501] ESR = 0x96000005 [ 7443.978545] Exception class = DABT (current EL), IL = 32 bits [ 7443.984447] SET = 0, FnV = 0 [ 7443.987490] EA = 0, S1PTW = 0 [ 7443.990619] Data abort info: [ 7443.993487] ISV = 0, ISS = 0x00000005 [ 7443.997309] CM = 0, WnR = 0 [ 7444.000266] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffc0a2cd8000 [ 7444.006777] [0000000000000008] *pgd=0000000000000000, *pud=0000000000000000 [ 7444.013738] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7444.019296] Modules linked in: bnep fuse xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink bcmdhd xt_addrtype iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack br_netfilter cfg80211 bluedroid_pm userspace_alert zram nvgpu ip_tables x_tables [ 7444.047137] CPU: 3 PID: 21321 Comm: systemd-fstab-g Not tainted 4.9.253-tegra #1 [ 7444.054515] Hardware name: Jetson-TX1 (DT) [ 7444.058598] task: ffffffc0fa3f7000 task.stack: ffffffc08ff78000 [ 7444.064508] PC is at __rb_insert_augmented+0x2c/0x220 [ 7444.069549] LR is at vma_interval_tree_insert+0x94/0xa0 [ 7444.074761] pc : [] lr : [] pstate: 204000c5 [ 7444.082138] sp : ffffffc08ff7bc40 [ 7444.085442] x29: ffffffc08ff7bc40 x28: ffffffc0b4c37480 [ 7444.090757] x27: ffffffc08ff7be88 x26: ffffffc0f4297038 [ 7444.096070] x25: 0000000000000000 x24: ffffffc0f4297018 [ 7444.101384] x23: 0000000000000000 x22: ffffffc0f4297038 [ 7444.106698] x21: ffffff80081f85a0 x20: ffffffc0f4297038 [ 7444.112010] x19: 0000000000000000 x18: 00000000000409fd [ 7444.117323] x17: ffffffff00000001 x16: 0000000000000000 [ 7444.122635] x15: 00000000000140a8 x14: ffffffc0d0f90548 [ 7444.127947] x13: 0000000000000014 x12: 0000000000000000 [ 7444.133260] x11: 0000000000000000 x10: ffffffc0f0e34108 [ 7444.138574] x9 : 0000000000000075 x8 : 0000000000000003 [ 7444.143888] x7 : ffffffc08ff70108 x6 : 0000000000000010 [ 7444.149201] x5 : 0000000000000008 x4 : ffffffc08ff70110 [ 7444.154513] x3 : 0000000000000014 x2 : ffffff80081f85a0 [ 7444.159825] x1 : ffffffc08ff70108 x0 : ffffffc0d0f90528 [ 7444.165138] [ 7444.166625] Process systemd-fstab-g (pid: 21321, stack limit = 0xffffffc08ff78000) [ 7444.174177] Call trace: [ 7444.176618] [] __rb_insert_augmented+0x2c/0x220 [ 7444.182699] [] vma_interval_tree_insert+0x94/0xa0 [ 7444.188952] [] __vma_adjust+0x368/0x7d0 [ 7444.194338] [] __split_vma.isra.4+0x10c/0x1c0 [ 7444.200242] [] split_vma+0x4c/0x68 [ 7444.205194] [] mprotect_fixup+0x24c/0x2b8 [ 7444.210753] [] do_mprotect_pkey+0x150/0x228 [ 7444.216484] [] SyS_mprotect+0x38/0x50 [ 7444.221697] [] el0_svc_naked+0x34/0x38 [ 7444.226997] ---[ end trace 3b2e7f7106ba4a1b ]--- [ 7444.241019] note: systemd-fstab-g[21321] exited with preempt_count 1 [ 7553.112þ[0000.749] [L4T TegraBoot] (version 00.00.2018.01-l4t-8728f3cb) [0000.754] Processing in cold boot mode Bootloader 2 [0000.759] A02 Bootrom Patch rev = 255 [0000.763] Power-up reason: pmc por [0000.766] No Battery Present [0000.768] pmic max77620 reset reason [0000.772] pmic max77620 NVERC : 0x50 [0000.775] RamCode = 0 [0000.777] Platform has Ddr4 type ram [0000.781] max77620 disabling SD1 Remote Sense [0000.785] Setting Ddr voltage to 1125mv [0000.789] Serial Number of Pmic Max77663: 0x701e3 [0000.796] Entering ramdump check [0000.799] Get RamDumpCarveOut = 0x0 [0000.803] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8 [0000.808] Last reboot was clean, booting normally! [0000.812] Sdram initialization is successful [0000.817] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000 [0000.823] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000 [0000.828] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000 [0000.834] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000 [0000.840] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000 [0000.846] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000 [0000.852] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000 [0000.858] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000 [0000.874] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000 [0000.880] Platform-DebugCarveout: 0 [0000.883] Nck Carveout Base=0x00000000ff080000 Size=0x00200000 [0000.889] Non secure mode, and RB not enabled. [0000.893] Rail not supported [0000.896] BoardID = 2180, SKU = 0x3e8 [0000.899] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0000.905] Read GPT from (0:3) [0000.940] Csd NumOfBlocks=0 [0000.949] Using GPT Primary to query partitions [0000.954] Initialize FailControl [0000.957] Read PT from (0:3) [0000.992] PT crc32 and magic check passed. [0000.996] Using BFS PT to query partitions [0001.001] Loading Tboot-CPU binary [0001.008] Verifying TBC in OdmNonSecureSBK mode [0001.018] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0001.025] Bootloader downloaded successfully. [0001.029] Downloaded Tboot-CPU binary to 0xa0000258 [0001.034] MAX77620_GPIO1 Configured. [0001.037] MAX77620_GPIO5 Configured. [0001.041] CPU power rail is up [0001.044] CPU clock enabled [0001.047] Performing RAM repair [0001.050] Updating A64 Warmreset Address to 0xa00002e9 [0001.055] BoardID = 2180, SKU = 0x3e8 [0001.059] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.065] NvTbootFailControlDoFailover: No failover; Continuing ... [0001.071] Loading NvTbootBootloaderDTB [0001.091] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode [0001.232] Bootloader DTB Load Address: 0x83000000 [0001.237] BoardID = 2180, SKU = 0x3e8 [0001.240] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.246] Loading NvTbootKernelDTB [0001.262] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode [0001.389] Kernel DTB Load Address: 0x83100000 [0001.394] BoardID = 2180, SKU = 0x3e8 [0001.397] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.403] NvTbootFailControlDoFailover: No failover; Continuing ... [0001.410] Loading cboot binary [0001.429] Verifying EBT in OdmNonSecureSBK mode [0001.470] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0001.477] Bootloader downloaded successfully. [0001.481] BoardID = 2180, SKU = 0x3e8 [0001.485] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.491] NvTbootFailControlDoFailover: No failover; Continuing ... [0001.497] PT: Partition NCT NOT found ! [0001.501] Warning: Find Partition via PT Failed [0001.505] Next binary entry address: 0x92c00258 [0001.510] BoardId: 2180 [0001.514] BoardID = 2180, SKU = 0x3e8 [0001.518] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.524] NvTbootFailControlDoFailover: No failover; Continuing ... [0001.539] Verifying SC7EntryFw in OdmNonSecureSBK mode [0001.629] /bpmp deleted [0001.631] SC7EntryFw header found loaded at 0xff700000 [0001.846] OVR2 PMIC [0001.848] Bpmp FW successfully loaded [0001.851] BoardID = 2180, SKU = 0x3e8 [0001.855] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.861] NvTbootFailControlDoFailover: No failover; Continuing ... [0001.868] WB0 init successfully at 0xff780000 [0001.872] Verifying NvTbootWb0 in OdmNonSecureSBK mode [0001.877] Set NvDecSticky Bits [0001.881] GSC2 address ff53fffc value c0edbbcc [0001.887] GSC MC Settings done [0001.890] BoardID = 2180, SKU = 0x3e8 [0001.893] Not Nano-SD or !QSPI-ONLY, check GPT table first ... [0001.900] TOS Image length 53680 [0001.903] Monitor size 53680 [0001.906] OS size 0 [0001.911] Secure Os AES-CMAC Verification Success! [0001.916] TOS image cipher info: plaintext [0001.920] Loading and Validation of Secure OS Successful [0001.936] SC7 Entry Firmware - 0xff700000, 0x4000 [0001.940] NvTbootPackSdramParams: start. [0001.946] NvTbootPackSdramParams: done. [0001.949] Tegraboot started after 140241 us [0001.953] Basic modules init took 1427072 us [0001.957] Sec Bootdevice Read Time = 67 ms, Read Size = 4026 KB [0001.963] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB [0001.969] Next stage binary read took 9031 us [0001.973] Carveout took -27620 us [0001.976] CPU initialization took 447763 us [0001.980] Total time taken by TegraBoot 1856246 us [0001.985] Starting CPU & Halting co-processor 64NOTICE: BL31: v1.3(release):b5eeb33 NOTICE: BL31: Built : 14:22:20, Apr 20 2022 ERROR: Error initializing runtime service trusty_fast [0002.108] RamCode = 0 [0002.123] LPDDR4 Training: Read DT: Number of tables = 10 [0002.128] EMC Training (SRC-freq: 204000; DST-freq: 408000) [0002.134] EMC Training Successful [0002.137] EMC Training (SRC-freq: 204000; DST-freq: 665600) [0002.143] EMC Training Successful [0002.146] EMC Training (SRC-freq: 204000; DST-freq: 800000) [0002.158] EMC Training Successful [0002.161] EMC Training (SRC-freq: 204000; DST-freq: 1065600) [0002.184] EMC Training Successful [0002.187] EMC Training (SRC-freq: 204000; DST-freq: 1331200) [0002.208] EMC Training Successful [0002.211] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0002.231] EMC Training Successful [0002.234] Switching to 800000 KHz Success [0002.241] RamCode = 0 [0002.245] DT Write: emc-table@40800 succeeded [0002.250] DT Write: emc-table@68000 succeeded [0002.255] DT Write: emc-table@102000 succeeded [0002.261] DT Write: emc-table@204000 succeeded [0002.266] DT Write: emc-table@408000 succeeded [0002.272] DT Write: emc-table@665600 succeeded [0002.277] DT Write: emc-table@800000 succeeded [0002.283] DT Write: emc-table@1065600 succeeded [0002.288] DT Write: emc-table@1331200 succeeded [0002.294] DT Write: emc-table@1600000 succeeded [0002.298] LPDDR4 Training: Write DT: Number of tables = 10 [0002.360] [0002.361] Debug Init done [0002.364] Marked DTB cacheable [0002.367] Bootloader DTB loaded at 0x83000000 [0002.371] Marked DTB cacheable [0002.374] Kernel DTB loaded at 0x83100000 [0002.378] DeviceTree Init done [0002.393] Pinmux applied successfully [0002.397] gicd_base: 0x50041000 [0002.401] gicc_base: 0x50042000 [0002.404] Interrupts Init done [0002.409] Using base:0x60005090 & irq:208 for tick-timer [0002.414] Using base:0x60005098 for delay-timer [0002.419] platform_init_timer: DONE [0002.422] Timer(tick) Init done [0002.426] osc freq = 38400 khz [0002.431] [0002.432] Welcome to L4T Cboot [0002.435] [0002.436] Cboot Version: 00.00.2018.01-t210-a2f2e4b8 [0002.441] calling constructors [0002.444] initializing heap [0002.447] initializing threads [0002.449] initializing timers [0002.452] creating bootstrap completion thread [0002.457] top of bootstrap2() [0002.460] CPU: ARM Cortex A57 [0002.462] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0002.467] initializing platform [0002.547] Config for emmc ddr50 mode completed [0002.552] sdmmc bdev is already initialized [0002.556] Enable APE clock [0002.558] Un-powergate APE partition [0002.562] of_register: registering tegra_udc to of_hal [0002.567] of_register: registering inv20628-driver to of_hal [0002.572] of_register: registering ads1015-driver to of_hal [0002.578] of_register: registering lp8557-bl-driver to of_hal [0002.584] of_register: registering bq2419x_charger to of_hal [0002.589] of_register: registering bq27441_fuel_gauge to of_hal [0002.603] gpio framework initialized [0002.607] of_register: registering tca9539_gpio to of_hal [0002.612] of_register: registering tca9539_gpio to of_hal [0002.617] of_register: registering i2c_bus_driver to of_hal [0002.623] of_register: registering i2c_bus_driver to of_hal [0002.629] of_register: registering i2c_bus_driver to of_hal [0002.634] pmic framework initialized [0002.638] of_register: registering max77620_pmic to of_hal [0002.643] regulator framework initialized [0002.647] of_register: registering tps65132_bl_driver to of_hal [0002.653] initializing target [0002.659] gpio_driver_register: register 'tegra_gpio_driver' driver [0002.668] board ID = 884, board SKU = 3E8 [0002.676] fixed regulator driver initialized [0002.719] initializing OF layer [0002.722] NCK carveout not present [0002.726] Skipping dts_overrides [0002.730] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.752] I2C Bus Init done [0002.754] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.766] I2C Bus Init done [0002.769] of_children_init: Ops found for compatible string ti,tca9539 [0002.779] tca9539_init: i2c bus: 2, slave addr: 0xe8 [0002.784] I2C slave not started [0002.787] I2C write failed [0002.790] i2c write failed [0002.793] Slave: 0xe8, Register 0x4 Instance 2, Buffer Size: 0 [0002.798] tca9539_device_init: failed to write polar reg [0002.804] tca9539_init: failed to init device! [0002.808] of_children_init: Ops found for compatible string ti,tca9539 [0002.819] tca9539_init: i2c bus: 2, slave addr: 0xee [0002.824] I2C slave not started [0002.827] I2C write failed [0002.829] i2c write failed [0002.832] Slave: 0xee, Register 0x4 Instance 2, Buffer Size: 0 [0002.838] tca9539_device_init: failed to write polar reg [0002.843] tca9539_init: failed to init device! [0002.848] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.859] I2C Bus Init done [0002.862] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.874] I2C Bus Init done [0002.876] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.888] I2C Bus Init done [0002.890] of_children_init: Ops found for compatible string maxim,max77620 [0002.902] max77620_init using irq 118 [0002.907] register 'maxim,max77620' pmic [0002.911] gpio_driver_register: register 'max77620-gpio' driver [0002.917] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.929] I2C Bus Init done [0002.933] NCK carveout not present [0002.946] Find /i2c@7000c000's alias i2c0 [0002.950] get eeprom at 1-a2, size 256, type 0 [0002.955] get eeprom at 1-ae, size 256, type 0 [0002.966] Find /i2c@7000c400's alias i2c1 [0002.969] get eeprom at 2-a0, size 256, type 0 [0002.981] Find /i2c@7000c500's alias i2c2 [0002.984] get eeprom at 3-a0, size 256, type 0 [0002.989] get eeprom at 3-ae, size 256, type 0 [0002.998] Find /host1x/i2c@546c0000's alias i2c6 [0003.002] get eeprom at 7-a8, size 256, type 0 [0003.007] pm_ids_update: Updating 1,a2, size 256, type 0 [0003.012] I2C slave not started [0003.015] I2C write failed [0003.017] Writing offset failed [0003.021] eeprom_init: EEPROM read failed [0003.024] pm_ids_update: eeprom init failed [0003.029] pm_ids_update: Updating 1,ae, size 256, type 0 [0003.034] I2C slave not started [0003.037] I2C write failed [0003.040] Writing offset failed [0003.043] eeprom_init: EEPROM read failed [0003.046] pm_ids_update: eeprom init failed [0003.051] pm_ids_update: Updating 2,a0, size 256, type 0 [0003.056] I2C slave not started [0003.059] I2C write failed [0003.062] Writing offset failed [0003.065] eeprom_init: EEPROM read failed [0003.069] pm_ids_update: eeprom init failed [0003.073] pm_ids_update: Updating 3,a0, size 256, type 0 [0003.103] pm_ids_update: The pm board id is 2180-1000-400 [0003.110] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 [0003.118] pm_ids_update: pm id update successful [0003.123] pm_ids_update: Updating 3,ae, size 256, type 0 [0003.128] I2C slave not started [0003.131] I2C write failed [0003.134] Writing offset failed [0003.137] eeprom_init: EEPROM read failed [0003.141] pm_ids_update: eeprom init failed [0003.145] pm_ids_update: Updating 7,a8, size 256, type 0 [0003.151] GPIO driver for phandle 0xf3 could not be found [0003.157] I2C slave not started [0003.160] I2C write failed [0003.162] Writing offset failed [0003.165] eeprom_init: EEPROM read failed [0003.169] pm_ids_update: eeprom init failed [0003.174] GPIO driver for phandle 0xf3 could not be found [0003.206] updating /chosen/nvidia,wifi-mac node 00:04:4b:8f:66:bc [0003.215] updating /chosen/nvidia,bluetooth-mac node 00:04:4b:8f:66:bd [0003.223] updating /chosen/nvidia,ethernet-mac node 00:04:4b:8f:66:be [0003.229] Plugin Manager: Parse ODM data 0x000a4000 [0003.242] shim_cmdline_install: /chosen/bootargs: [0003.257] Find /i2c@7000c000's alias i2c0 [0003.261] get eeprom at 1-a2, size 256, type 0 [0003.265] get eeprom at 1-ae, size 256, type 0 [0003.276] Find /i2c@7000c400's alias i2c1 [0003.280] get eeprom at 2-a0, size 256, type 0 [0003.291] Find /i2c@7000c500's alias i2c2 [0003.295] get eeprom at 3-a0, size 256, type 0 [0003.299] get eeprom at 3-ae, size 256, type 0 [0003.308] Find /host1x/i2c@546c0000's alias i2c6 [0003.312] get eeprom at 7-a8, size 256, type 0 [0003.317] pm_ids_update: Updating 1,a2, size 256, type 0 [0003.322] I2C slave not started [0003.325] I2C write failed [0003.328] Writing offset failed [0003.331] eeprom_init: EEPROM read failed [0003.335] pm_ids_update: eeprom init failed [0003.339] pm_ids_update: Updating 1,ae, size 256, type 0 [0003.344] I2C slave not started [0003.347] I2C write failed [0003.350] Writing offset failed [0003.353] eeprom_init: EEPROM read failed [0003.357] pm_ids_update: eeprom init failed [0003.361] pm_ids_update: Updating 2,a0, size 256, type 0 [0003.366] I2C slave not started [0003.369] I2C write failed [0003.372] Writing offset failed [0003.375] eeprom_init: EEPROM read failed [0003.379] pm_ids_update: eeprom init failed [0003.383] pm_ids_update: Updating 3,a0, size 256, type 0 [0003.413] pm_ids_update: The pm board id is 2180-1000-400 [0003.420] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 [0003.427] pm_ids_update: pm id update successful [0003.432] pm_ids_update: Updating 3,ae, size 256, type 0 [0003.437] I2C slave not started [0003.440] I2C write failed [0003.443] Writing offset failed [0003.446] eeprom_init: EEPROM read failed [0003.450] pm_ids_update: eeprom init failed [0003.454] pm_ids_update: Updating 7,a8, size 256, type 0 [0003.460] GPIO driver for phandle 0xf3 could not be found [0003.466] I2C slave not started [0003.468] I2C write failed [0003.471] Writing offset failed [0003.474] eeprom_init: EEPROM read failed [0003.478] pm_ids_update: eeprom init failed [0003.483] GPIO driver for phandle 0xf3 could not be found [0003.515] Add serial number:0321917091163 as DT property [0003.525] Applying platform configs [0003.533] platform-init is not present. Skipping [0003.538] calling apps_init() [0003.556] Found 22 GPT partitions in "sdmmc3_user" [0003.561] Proceeding to Cold Boot [0003.564] starting app android_boot_app [0003.568] Device state: unlocked [0003.571] display console init [0003.577] status of dsi node is not okay [0003.585] enabling 'vdd-hdmi' regulator [0003.588] GPIO driver for phandle 0xf4 could not be found [0003.617] DT entry for leds-pwm not found [0003.621] hdmi cable not connected [0003.625] is_hdmi_needed: HDMI not connected, returning false [0003.630] hdmi is not connected [0003.633] display_console_init: no valid display out_type [0003.643] Gpio keyboard init success [0003.689] found decompressor handler: lz4-legacy [0003.703] decompressing blob (type 1)... [0003.738] display_resolution: No display init [0003.743] Failed to retrieve display resolution [0003.747] Could not load/initialize BMP blob...ignoring [0003.752] -------> se_aes_verify_sbk_clear: 747 [0003.757] se_aes_verify_sbk_clear: Error [0003.761] SE operation failed [0003.764] bl_battery_charging: connected to external power supply [0003.773] fastboot: usb cable is not connected [0003.777] display_console_ioctl: No display init [0003.782] switch_backlight failed [0003.791] device_query_partition_size: failed to open partition sdmmc3_user:MSC ! [0003.799] MSC Partition not found [0003.820] blob_init: USP partition does not have valid Blob [0003.826] kfs_getpartname: name = LNX [0003.829] Loading kernel from LNX [0003.894] load kernel from storage [0003.903] decompressor handler not found [0003.938] Successfully loaded kernel and ramdisk images [0003.944] board ID = 884, board SKU = 3E8 [0003.949] display_resolution: No display init [0003.953] Failed to retrieve display resolution [0003.958] bmp blob is not loaded and initialized [0003.962] Failed to display boot-logo [0003.966] NCK carveout not present [0003.969] Skipping dts_overrides [0003.972] NCK carveout not present [0003.984] Find /i2c@7000c000's alias i2c0 [0003.988] get eeprom at 1-a2, size 256, type 0 [0003.992] get eeprom at 1-ae, size 256, type 0 [0004.001] Find /i2c@7000c400's alias i2c1 [0004.005] get eeprom at 2-a0, size 256, type 0 [0004.015] Find /i2c@7000c500's alias i2c2 [0004.019] get eeprom at 3-a0, size 256, type 0 [0004.023] get eeprom at 3-ae, size 256, type 0 [0004.032] Find /host1x/i2c@546c0000's alias i2c6 [0004.036] get eeprom at 7-a8, size 256, type 0 [0004.041] pm_ids_update: Updating 1,a2, size 256, type 0 [0004.046] I2C slave not started [0004.049] I2C write failed [0004.052] Writing offset failed [0004.055] eeprom_init: EEPROM read failed [0004.059] pm_ids_update: eeprom init failed [0004.063] pm_ids_update: Updating 1,ae, size 256, type 0 [0004.068] I2C slave not started [0004.071] I2C write failed [0004.074] Writing offset failed [0004.077] eeprom_init: EEPROM read failed [0004.081] pm_ids_update: eeprom init failed [0004.085] pm_ids_update: Updating 2,a0, size 256, type 0 [0004.090] I2C slave not started [0004.093] I2C write failed [0004.096] Writing offset failed [0004.099] eeprom_init: EEPROM read failed [0004.103] pm_ids_update: eeprom init failed [0004.107] pm_ids_update: Updating 3,a0, size 256, type 0 [0004.137] pm_ids_update: The pm board id is 2180-1000-400 [0004.144] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 [0004.152] pm_ids_update: pm id update successful [0004.156] pm_ids_update: Updating 3,ae, size 256, type 0 [0004.162] I2C slave not started [0004.165] I2C write failed [0004.167] Writing offset failed [0004.170] eeprom_init: EEPROM read failed [0004.174] pm_ids_update: eeprom init failed [0004.178] pm_ids_update: Updating 7,a8, size 256, type 0 [0004.185] GPIO driver for phandle 0xf3 could not be found [0004.190] I2C slave not started [0004.193] I2C write failed [0004.196] Writing offset failed [0004.199] eeprom_init: EEPROM read failed [0004.203] pm_ids_update: eeprom init failed [0004.208] GPIO driver for phandle 0xf3 could not be found [0004.240] updating /chosen/nvidia,wifi-mac node 00:04:4b:8f:66:bc [0004.248] updating /chosen/nvidia,bluetooth-mac node 00:04:4b:8f:66:bd [0004.256] updating /chosen/nvidia,ethernet-mac node 00:04:4b:8f:66:be [0004.262] Plugin Manager: Parse ODM data 0x000a4000 [0004.274] shim_cmdline_install: /chosen/bootargs: [0004.279] Add serial number:0321917091163 as DT property [0004.289] "bpmp" doesn't exist, creating [0004.295] Updated bpmp info to DTB [0004.301] Updated initrd info to DTB [0004.304] "proc-board" doesn't exist, creating [0004.310] Updated board info to DTB [0004.313] "pmu-board" doesn't exist, creating [0004.319] Updated board info to DTB [0004.322] "display-board" doesn't exist, creating [0004.328] Updated board info to DTB [0004.331] "reset" doesn't exist, creating [0004.336] Updated reset info to DTB [0004.339] display_console_ioctl: No display init [0004.344] display_console_ioctl: No display init [0004.349] display_console_ioctl: No display init [0004.353] Cmdline: tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt [0004.389] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0004.405] Updated bootarg info to DTB [0004.409] Adding uuid 00000001642d78880800000002ff8300 to DT [0004.415] Adding eks info 0 to DT [0004.421] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7 [0004.427] Updated memory info to DTB [0004.437] set vdd_core voltage to 1125 mv [0004.441] setting 'vdd-core' regulator to 1125000 micro volts [0004.447] Found secure-pmc; disable BPMP U-Boot 2020.04-g4335beb (Apr 20 2022 - 14:22:25 -0700) SoC: tegra210 Model: NVIDIA P2371-2180 Board: NVIDIA P2371-2180 DRAM: 4 GiB MMC: sdhci@700b0000: 1, sdhci@700b0600: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 879 bytes read in 31 ms (27.3 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7160179 bytes read in 182 ms (37.5 MiB/s) Retrieving file: /boot/Image 34828296 bytes read in 794 ms (41.8 MiB/s) append: tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 ## Flattened Device Tree blob at 83100000 Booting using the fdt blob at 0x83100000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000083100000, end 00000000831ae0c4 Starting kernel ... [ 0.535820] pca953x 1-0077: failed reading register [ 0.987682] pwm-backlight backlight: fail to find platform data [ 1.005393] tegra_dc_get_panel_ops: unknown panel: /host1x/dsi/panel-y-272p-4-3 [ 1.005415] tegradc tegradc.0: err:-19 parsing panel_ops [ 1.006425] tegradc tegradc.1: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 1.149227] tsc2007 0-0048: i2c io error: -121 [ 1.153699] tsc2007 0-0048: Failed to setup chip: -121 [ 1.164062] lsm6ds3 0-006b: lsm6ds3: probed [ 1.305249] FAN: coudln't get the regulator [ 1.338578] ina3221x 1-0042: ina3221 reset failure status: 0xffffff87 [ 1.345651] ina3221x 1-0043: ina3221 reset failure status: 0xffffff87 [ 1.771404] rt5640 0-001c: Device with ID register 0xffffff80 is not rt5640/39 [ 2.093532] cgroup: cgroup2: unknown option "nsdelegate" [ 3.368655] using random self ethernet address [ 3.375245] using random host ethernet address [ 3.446120] random: crng init done [ 3.449525] random: 7 urandom warning(s) missed due to ratelimiting [ 3.787962] overlay: module is already loaded [ 3.865558] using random self ethernet address [ 3.870206] using random host ethernet address [ 5.400098] Bridge firewalling registered Ubuntu 18.04.6 LTS ubuntu ttyS0 ubuntu login: Ubuntu 18.04.6 LTS ubuntu ttyS0 ubuntu login: [ 280.396046] edid invalid