[0000.251] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobi le-f97eef92) [0000.259] I> Boot-device: eMMC [0000.266] I> sdmmc bdev is already initialized [0000.271] I> pmic: reset reason (nverc) : 0x50 [0000.304] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.324] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.330] W> No valid slot number is found in scratch register [0000.336] W> Return default slot: _a [0000.339] I> A/B: bin_type (16) slot 0 [0000.343] I> Loading partition bpmp-fw at 0xd7800000 [0000.348] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.353] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.378] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.384] W> No valid slot number is found in scratch register [0000.389] W> Return default slot: _a [0000.393] I> A/B: bin_type (17) slot 0 [0000.396] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.401] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.407] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.426] I> Binary(17) of size 138656 is loaded @ 0xd79de000 [0000.455] I> Loading SCE-FW ... [0000.458] W> No valid slot number is found in scratch register [0000.464] W> Return default slot: _a [0000.467] I> A/B: bin_type (12) slot 0 [0000.471] I> Loading partition sce-fw at 0xd7300000 [0000.476] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.481] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.500] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.506] I> Init SCE [0000.508] I> Loading APE-FW ... [0000.511] W> No valid slot number is found in scratch register [0000.517] W> Return default slot: _a [0000.520] I> A/B: bin_type (11) slot 0 [0000.524] I> Loading partition adsp-fw at 0xd7400000 [0000.529] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.534] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.553] I> Binary(11) of size 77232 is loaded @ 0xd7400000 [0000.559] I> Copy BTCM section [0000.562] W> No valid slot number is found in scratch register [0000.568] W> Return default slot: _a [0000.571] I> A/B: bin_type (13) slot 0 [0000.575] I> Loading partition cpu-bootloader at 0x96000000 [0000.580] I> Reading two headers - addr:0x96000000 blocks:1 [0000.586] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.607] I> Binary(13) of size 309424 is loaded @ 0x96000000 [0000.612] W> No valid slot number is found in scratch register [0000.618] W> Return default slot: _a [0000.622] I> A/B: bin_type (20) slot 0 [0000.625] I> Loading partition bootloader-dtb at 0x85205400 [0000.631] I> Reading two headers - addr:0x85205400 blocks:1 [0000.636] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.656] I> Binary(20) of size 173872 is loaded @ 0x85205400 [0000.661] W> No valid slot number is found in scratch register [0000.667] W> Return default slot: _a [0000.670] I> A/B: bin_type (14) slot 0 [0000.674] I> Loading partition secure-os at 0x85305600 [0000.679] I> Reading two headers - addr:0x85305600 blocks:1 [0000.684] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.707] I> Binary(14) of size 406960 is loaded @ 0x85305600 [0000.714] I> TOS boot-params @ 0x85000000 [0000.718] I> TOS params prepared [0000.721] I> Loading EKS ... [0000.724] I> A/B: bin_type (15) slot 0 [0000.728] I> Loading partition eks at 0x85905800 [0000.732] I> Reading two headers - addr:0x85905800 blocks:1 [0000.738] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.756] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.762] I> EKB detected (length: 0x400) @ 0x85905800 [0000.767] I> Copied encrypted keys [0000.771] I> boot profiler @ 0x175844000 [0000.774] I> boot profiler for TOS @ 0x175844000 [0000.779] I> Unhalting SCE [0000.782] I> Primary Memory Start:80000000 Size:70000000 [0000.787] I> Extended Memory Start:f0110000 Size:856f0000 [0000.794] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):9892ce1 NOTICE: BL31: Built : 09:21:30, Nov 22 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.021] I> Welcome to Cboot [0001.024] I> Cboot Version: t186-cf8d3df5 [0001.028] I> CPU-BL Params @ 0x175800000 [0001.031] I> 0) Base:0x00000000 Size:0x00000000 [0001.036] I> 1) Base:0x177f00000 Size:0x00100000 [0001.040] I> 2) Base:0x177e00000 Size:0x00100000 [0001.045] I> 3) Base:0x177d00000 Size:0x00100000 [0001.049] I> 4) Base:0x177c00000 Size:0x00100000 [0001.054] I> 5) Base:0x177b00000 Size:0x00100000 [0001.058] I> 6) Base:0x177800000 Size:0x00200000 [0001.063] I> 7) Base:0x177400000 Size:0x00400000 [0001.067] I> 8) Base:0x177a00000 Size:0x00100000 [0001.072] I> 9) Base:0x177300000 Size:0x00100000 [0001.076] I> 10) Base:0x176800000 Size:0x00800000 [0001.081] I> 11) Base:0x30000000 Size:0x00040000 [0001.085] I> 12) Base:0xf0000000 Size:0x00100000 [0001.090] I> 13) Base:0x30040000 Size:0x00001000 [0001.094] I> 14) Base:0x30048000 Size:0x00001000 [0001.099] I> 15) Base:0x30049000 Size:0x00001000 [0001.103] I> 16) Base:0x3004a000 Size:0x00001000 [0001.107] I> 17) Base:0x3004b000 Size:0x00001000 [0001.112] I> 18) Base:0x3004c000 Size:0x00001000 [0001.116] I> 19) Base:0x3004d000 Size:0x00001000 [0001.121] I> 20) Base:0x3004e000 Size:0x00001000 [0001.125] I> 21) Base:0x3004f000 Size:0x00001000 [0001.130] I> 22) Base:0x00000000 Size:0x00000000 [0001.134] I> 23) Base:0xf0100000 Size:0x00010000 [0001.138] I> 24) Base:0x00000000 Size:0x00000000 [0001.143] I> 25) Base:0x00000000 Size:0x00000000 [0001.147] I> 26) Base:0x00000000 Size:0x00000000 [0001.152] I> 27) Base:0x00000000 Size:0x00000000 [0001.156] I> 28) Base:0x84400000 Size:0x00400000 [0001.161] I> 29) Base:0x30000000 Size:0x00010000 [0001.165] I> 30) Base:0x178000000 Size:0x08000000 [0001.170] I> 31) Base:0x00000000 Size:0x00000000 [0001.174] I> 32) Base:0x176000000 Size:0x00600000 [0001.179] I> 33) Base:0x80000000 Size:0x70000000 [0001.183] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.187] I> 35) Base:0x00000000 Size:0x00000000 [0001.192] I> 36) Base:0x00000000 Size:0x00000000 [0001.196] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.201] I> 38) Base:0x84000000 Size:0x00400000 [0001.205] I> 39) Base:0x96000000 Size:0x02000000 [0001.210] I> 40) Base:0x85000000 Size:0x01200000 [0001.214] I> 41) Base:0x175800000 Size:0x00500000 [0001.219] I> 42) Base:0x00000000 Size:0x00000000 [0001.223] I> 43) Base:0x00000000 Size:0x00000000 [0001.227] GIC-SPI Target CPU: 4 [0001.231] Interrupts Init done [0001.234] calling constructors [0001.237] initializing heap [0001.240] initializing threads [0001.243] initializing timers [0001.246] creating bootstrap completion thread [0001.251] top of bootstrap2() [0001.254] CPU: ARM Cortex A57 [0001.257] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.262] initializing platform [0001.266] I> Bl_dtb @0x85205400 [0001.269] I> gpio framework initialized [0001.274] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driv er [0001.282] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.290] I> GPIO framework and drivers are initialized. [0001.295] I> Boot-device: eMMC [0001.302] I> sdmmc bdev is already initialized [0001.333] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.351] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.356] W> opt-in fuse is not set, skip fuse_burning [0001.361] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.367] W> No valid slot number is found in scratch register [0001.373] W> Return default slot: _a [0001.382] I> A/B: bin_type (21) slot 0 [0001.386] I> Loading kernel-dtb from partition [0001.390] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.408] I> Kernel_dtb @0x80000000 [0001.411] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.419] W> fetch_driver_phandle_from_dt: failed to get node with compatible t i,tca9539 [0001.428] W> fetch_driver_phandle_from_dt: failed to get node with compatible n xp,tca9539 [0001.436] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.442] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.450] W> fetch_driver_phandle_from_dt: failed to get node with compatible t i,tca9539 [0001.460] W> fetch_driver_phandle_from_dt: failed to get node with compatible n xp,tca9539 [0001.468] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.475] I> fixed regulator driver initialized [0001.496] I> register 'maxim' power off handle [0001.501] I> virtual i2c enabled [0001.504] I> registered 'maxim,max77620' pmic [0001.509] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.519] E> failed to read label property for node 144348: 13 [0001.525] E> failed to read reg property for node 144444: 13 [0001.532] E> failed to read reg property for node 144496: 13 [0001.539] E> failed to read label property for node 144580: 13 [0001.546] E> failed to read reg property for node 144648: 13 [0001.552] E> failed to read reg property for node 144720: 13 [0001.559] I> Find /i2c@c250000's alias i2c7 [0001.563] I> Reading eeprom i2c=7 address=0x50 [0001.593] I> Device at /i2c@c250000:0x50 [0001.596] I> Reading eeprom i2c=7 address=0x57 [0001.601] E> I2C: slave not found in slaves. [0001.605] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start tr ue. [0001.613] E> I2C_DEV: Failed to send register address 0x00000000. [0001.619] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.628] E> eeprom: Failed to read I2C slave device [0001.633] I> Eeprom read failed 0x3526070d [0001.637] I> Find /i2c@3160000's alias i2c0 [0001.641] I> Reading eeprom i2c=0 address=0x50 [0001.646] E> I2C: slave not found in slaves. [0001.650] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start tr ue. [0001.658] E> I2C_DEV: Failed to send register address 0x00000000. [0001.664] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.673] E> eeprom: Failed to read I2C slave device [0001.678] I> Eeprom read failed 0x3526070d [0001.683] I> Find /i2c@3180000's alias i2c2 [0001.687] I> Reading eeprom i2c=2 address=0x54 [0001.691] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.696] C> GPIO driver for chip_id 0x2 could not be found [0001.701] E> cam_eeprom_read: Can't get gpio driver [0001.706] I> Eeprom read failed 0x4d4d000d [0001.710] I> Reading eeprom i2c=2 address=0x57 [0001.714] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.719] C> GPIO driver for chip_id 0x2 could not be found [0001.724] E> cam_eeprom_read: Can't get gpio driver [0001.729] I> Eeprom read failed 0x4d4d000d [0001.733] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0001.738] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0001.760] I> regulator 'vdd-hdmi-5v0' already enabled [0001.771] I> regulator 'vdd-hdmi-5v0' already enabled [0001.776] I> hdmi cable connected [0001.781] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.788] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.794] I> retrieved tmds range from prod_list_hdmi_soc [0001.800] E> cannot find any other nvdisp nodes [0001.809] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.816] E> I2C: Failed to clear bus for instance 3. [0001.821] E> I2C: Failed to clear bus for instance 3. [0001.826] E> I2C_DEV: Failed to initialize instance 3. [0001.831] E> read_edid, invalid i2c handle [0001.838] I> hdmi_enable, starting HDMI initialisation [0001.846] I> hdmi_enable, HDMI initialisation complete [0001.859] initializing target [0001.862] calling apps_init() [0001.865] starting app kernel_boot_app [0001.887] I> found decompressor handler: lz4-legacy [0001.892] I> decompressing BMP blob ... [0001.964] I> Kernel type = Normal [0001.967] I> ########## Fixed storage boot ########## [0001.972] I> Loading kernel-bootctrl from partition [0001.977] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.991] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.998] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.005] W> No valid slot number is found in scratch register [0002.011] W> Return default slot: _a [0002.014] I> A/B: bin_type (24) slot 0 [0002.030] I> Boot image size read from image header: 9902d [0002.035] I> Boot image load address: 0x80400000 [0002.039] I> Loading kernel from partition [0002.043] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.987] I> Validate kernel ... [0002.990] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.998] I> Decrypt the buffer ... [0003.001] W> tegrabl_decrypt_block: fuse ( 0x0) is not burnt to do encryption (0x4); skip decryption. [0003.010] I> done [0003.012] I> Checking boot.img header magic ... [0003.016] I> [OK] [0003.018] I> kernel-dtb is already loaded [0003.022] I> Validate kernel-dtb ... [0003.025] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.032] I> Decrypt the buffer ... [0003.036] W> tegrabl_decrypt_block: fuse ( 0x0) is not burnt to do encryption (0x4); skip decryption. [0003.045] I> done [0003.046] I> Kernel hdr @0x80400000 [0003.050] I> Kernel dtb @0x80000000 [0003.053] I> decompressor handler not found [0003.057] I> Copying kernel image (626733 bytes) from 0x80400800 to 0x80600000 ... [0003.064] I> Done [0003.066] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0003.073] I> Updated bpmp info to DTB [0003.078] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0003.082] I> Updated initrd info to DTB [0003.086] W> WARN: Fail to override "console=none" in commandline [0003.092] I> Active rootfs suffix: [0003.095] W> tegrabl_linuxboot_add_disp_param, du 1 failed to get display param s [0003.102] W> tegrabl_linuxboot_add_disp_param, du 1 failed to get display param s [0003.110] I> disabled_core_mask: 0xffffff0c [0003.114] W> No valid slot number is found in scratch register [0003.119] W> Return default slot: _a [0003.123] I> Active slot suffix: [0003.126] I> add_boot_slot_suffix: slot_suffix = [0003.130] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwai t rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved =0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2 008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_consol e_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_da taptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.177] I> Updated bootarg info to DTB [0003.181] W> MAC addr invalid! [0003.184] E> Failed to get WIFI MAC address [0003.188] W> MAC addr invalid! [0003.191] E> Failed to get Bluetooth MAC address [0003.195] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:55:e1:ac [0003.201] E> Found no plugin manager ids in source DT [0003.206] W> Add plugin manager ids from board info [0003.211] W> "plugin-manager" doesn't exist, creating [0003.216] W> "ids" doesn't exist, creating [0003.220] W> "connection" doesn't exist, creating [0003.224] W> "configs" doesn't exist, creating [0003.229] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0003.234] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0003.245] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.252] W> "i2c@c250000" doesn't exist, creating [0003.257] W> "module@0x50" doesn't exist, creating [0003.262] I> Adding plugin-manager/ids/3636-0001-300-H [0003.268] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.274] I> Adding plugin-manager/configs/3636-power-config 00 [0003.280] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.285] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.291] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.297] I> Adding plugin-manager/configs/3636-display-config 00 [0003.303] I> Adding plugin-manager/cvm [0003.307] W> "chip-id" doesn't exist, creating [0003.311] I> Adding plugin-manager/chip-id/A02P [0003.316] W> "odm-data" doesn't exist, creating [0003.320] I> Adding /chosen/plugin-manager/odm-data [0003.328] I> added [base:0x80000000, size:0x70000000] to /memory [0003.334] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.340] I> added [base:0x175e00000, size:0x200000] to /memory [0003.345] I> added [base:0x176600000, size:0x200000] to /memory [0003.351] I> added [base:0x177000000, size:0x200000] to /memory [0003.357] I> Updated memory info to DTB [0003.361] W> add_disp_param: failed to get display params for du=1 [0003.368] W> "reset" doesn't exist, creating [0003.372] W> "pmc-reset-reason" doesn't exist, creating [0003.377] W> "pmic-reset-reason" doesn't exist, creating [0003.383] I> Adding ecid(000000016409c2471800000003fb81c0) to DT [0003.389] I> disabled_core_mask: 0xffffff0c [0003.397] I> Add serial number:1422821069150 as DT property [0003.404] I> Plugin-manager override starting [0003.409] I> node /plugin-manager/fragement@0 matches [0003.417] I> node /plugin-manager/fragement@3 matches [0003.427] I> Disable plugin-manager status in FDT [0003.431] I> Plugin-manager override finished successfully [0003.436] I> tegrabl_load_kernel_and_dtb: Done [0003.481] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g4335beb (Nov 22 2022 - 09:21:33 -0800) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 539 bytes read in 13 ms (40 KiB/s) Ignoring malformed menu command: TITLE 1: development kernel Retrieving file: /boot/initrd 7238963 bytes read in 191 ms (36.1 MiB/s) Retrieving file: /home/dev/Image Skipping development for failure retrieving kernel 2: primary kernel Retrieving file: /boot/initrd 7238963 bytes read in 190 ms (36.3 MiB/s) Retrieving file: /boot/Image 35422216 bytes read in 848 ms (39.8 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 000000008002f6c9 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-tegra (MY-MACHINE) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #12 SMP PREEMPT Mon Mar 13 10:30:47 CET 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29796(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147108K/4018164K available (15806K kernel code, 3040K rwdata, 6868K rodata, 8832K init, 620K bss, 117392K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ff0000 ( 15808 KB) [ 0.000000] .rodata : 0xffffff8008ff0000 - 0xffffff80096b0000 ( 6912 KB) [ 0.000000] .init : 0xffffff80096b0000 - 0xffffff8009f50000 ( 8832 KB) [ 0.000000] .data : 0xffffff8009f50000 - 0xffffff800a248008 ( 3041 KB) [ 0.000000] .bss : 0xffffff800a248008 - 0xffffff800a2e322c ( 621 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009244] Console: colour dummy device 80x25 [ 0.013921] console [tty0] enabled [ 0.017482] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-tegra (MY-MACHINE) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #12 SMP PREEMPT Mon Mar 13 10:30:47 CET 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29796(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147108K/4018164K available (15806K kernel code, 3040K rwdata, 6868K rodata, 8832K init, 620K bss, 117392K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ff0000 ( 15808 KB) [ 0.000000] .rodata : 0xffffff8008ff0000 - 0xffffff80096b0000 ( 6912 KB) [ 0.000000] .init : 0xffffff80096b0000 - 0xffffff8009f50000 ( 8832 KB) [ 0.000000] .data : 0xffffff8009f50000 - 0xffffff800a248008 ( 3041 KB) [ 0.000000] .bss : 0xffffff800a248008 - 0xffffff800a2e322c ( 621 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009244] Console: colour dummy device 80x25 [ 0.013921] console [tty0] enabled [ 0.017482] bootconsole [uart8250] disabled [ 0.021869] kmemleak: Kernel memory leak detector disabled [ 0.021884] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.021898] pid_max: default: 32768 minimum: 301 [ 0.022209] Security Framework initialized [ 0.022365] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.022374] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.022963] ftrace: allocating 47836 entries in 187 pages [ 0.149075] sched-energy: Sched-energy-costs installed from DT [ 0.149094] ASID allocator initialised with 65536 entries [ 0.185079] tegra-id: chipid=21817. [ 0.185093] tegra-id: opt_subrevision=1. [ 0.185116] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.185128] DTS File Name: /home/dev/bsp/workdir/Linux_for_Tegra/source/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.185143] DTB Build time: [ 0.235005] CPU1: Booted secondary processor [4e0f0030] [ 0.266392] CPU2: Booted secondary processor [4e0f0030] [ 0.297407] CPU3: Booted secondary processor [411fd073] [ 0.329364] CPU4: Booted secondary processor [411fd073] [ 0.361361] CPU5: Booted secondary processor [411fd073] [ 0.361416] Brought up 6 CPUs [ 0.361448] SMP: Total of 6 processors activated. [ 0.361459] CPU features: detected feature: 32-bit EL0 Support [ 0.363860] CPU: All CPU(s) started at EL2 [ 0.364023] alternatives: patching kernel code [ 0.366380] devtmpfs: initialized [ 0.386564] Initilizing CustomIPI irq domain [ 0.386725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386750] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.395212] pinctrl core: initialized pinctrl subsystem [ 0.395463] OS set in device tree is not L4T. [ 0.395675] regulator-dummy: no parameters [ 0.395827] Initializing plugin-manager [ 0.395891] Plugin module not found [ 0.395932] Plugin-manager status disabled [ 0.396983] NET: Registered protocol family 16 [ 0.397923] pstore: using zlib compression [ 0.398193] console [pstore-1] enabled [ 0.398204] pstore: Registered ramoops as persistent store backend [ 0.398216] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.413420] cpuidle: using governor menu [ 0.414304] bpmp: waiting for handshake [ 0.414318] bpmp: handshake completed [ 0.414344] bpmp: synchronizing channels [ 0.414356] bpmp: channels synchronized [ 0.414367] bpmp: mail init ok [ 0.415713] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.415731] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.415744] arm-smmu 12000000.iommu: stage 1 translation [ 0.415755] arm-smmu 12000000.iommu: stage 2 translation [ 0.415767] arm-smmu 12000000.iommu: nested translation [ 0.415781] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.415799] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.415817] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.415830] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.415842] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.417542] vdso: 2 pages (1 code @ ffffff8008ff7000, 1 data @ ffffff8009f54000) [ 0.417572] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.420805] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.421714] Registering BPMP clocks... [ 0.421794] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.422232] Serial: AMBA PL011 UART driver [ 0.423136] tegra_powergate_init: DONE [ 0.423153] DTS File Name: /home/dev/bsp/workdir/Linux_for_Tegra/source/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.423178] DTB Build time: [ 0.424363] Tegra reboot handler registered. [ 0.425500] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.425580] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.425603] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.425614] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.425626] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.425793] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.425819] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.426093] iommu: Adding device 3460000.sdhci to group 0 [ 0.426528] iommu: Adding device 3440000.sdhci to group 1 [ 0.427500] iommu: Adding device 3160000.i2c to group 2 [ 0.427916] iommu: Adding device c240000.i2c to group 3 [ 0.428220] iommu: Adding device 3180000.i2c to group 4 [ 0.428527] iommu: Adding device 3190000.i2c to group 5 [ 0.428915] iommu: Adding device 31b0000.i2c to group 6 [ 0.429214] iommu: Adding device 31c0000.i2c to group 7 [ 0.429535] iommu: Adding device c250000.i2c to group 8 [ 0.429822] iommu: Adding device 31e0000.i2c to group 9 [ 0.431242] iommu: Adding device 3210000.spi to group 10 [ 0.431535] iommu: Adding device c260000.spi to group 11 [ 0.432173] iommu: Adding device 3100000.serial to group 12 [ 0.432460] iommu: Adding device 3110000.serial to group 13 [ 0.432740] iommu: Adding device 3130000.serial to group 14 [ 0.433854] iommu: Adding device 2490000.ether_qos to group 15 [ 0.433877] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.434677] iommu: Adding device b000000.rtcpu to group 16 [ 0.436257] iommu: Adding device 13e10000.host1x to group 17 [ 0.436548] iommu: Adding device 13e10000.host1x:ctx0 to group 18 [ 0.436824] iommu: Adding device 13e10000.host1x:ctx1 to group 19 [ 0.437104] iommu: Adding device 13e10000.host1x:ctx2 to group 20 [ 0.437426] iommu: Adding device 13e10000.host1x:ctx3 to group 21 [ 0.437704] iommu: Adding device 13e10000.host1x:ctx4 to group 22 [ 0.437982] iommu: Adding device 13e10000.host1x:ctx5 to group 23 [ 0.438271] iommu: Adding device 13e10000.host1x:ctx6 to group 24 [ 0.438551] iommu: Adding device 13e10000.host1x:ctx7 to group 25 [ 0.438960] iommu: Adding device 150c0000.nvcsi to group 26 [ 0.439505] iommu: Adding device 15700000.vi to group 27 [ 0.439805] iommu: Adding device 15600000.isp to group 28 [ 0.440006] iommu: Adding device 15200000.dc_common to group 29 [ 0.440056] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x800000) [ 0.440108] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.440543] iommu: Adding device 15200000.nvdisplay to group 30 [ 0.440855] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.441160] iommu: Adding device 15340000.vic to group 32 [ 0.441356] iommu: Adding device 154c0000.nvenc to group 33 [ 0.441589] iommu: Adding device 15480000.nvdec to group 34 [ 0.441880] iommu: Adding device 15380000.nvjpg to group 35 [ 0.442079] iommu: Adding device 15500000.tsec to group 36 [ 0.442267] iommu: Adding device 15100000.tsecb to group 37 [ 0.443120] iommu: Adding device 15810000.se to group 38 [ 0.443314] iommu: Adding device 15820000.se to group 39 [ 0.443516] iommu: Adding device 15830000.se to group 40 [ 0.443725] iommu: Adding device 15840000.se to group 41 [ 0.444467] iommu: Adding device smmu_test to group 42 [ 0.445023] mc: mapped MMIO address: 0xffffff800a7e0000 -> 0x2c10000 [ 0.445048] mc: mapped MMIO address: 0xffffff800a9b0000 -> 0x2c20000 [ 0.445067] mc: mapped MMIO address: 0xffffff800a9d0000 -> 0x2c30000 [ 0.445086] mc: mapped MMIO address: 0xffffff800a9f0000 -> 0x2c40000 [ 0.445108] mc: mapped MMIO address: 0xffffff800aa10000 -> 0x2c50000 [ 0.445124] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.445143] mc-err: mcerr ops are set to t18x [ 0.445297] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.446013] iommu: Adding device 3530000.xhci to group 43 [ 0.446035] arm-smmu: forcing sodev map for 3530000.xhci [ 0.446437] iommu: Adding device 3550000.xudc to group 44 [ 0.446465] arm-smmu: forcing sodev map for 3550000.xudc [ 0.446971] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.446989] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.447003] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.447588] iommu: Adding device 17000000.gp10b to group 45 [ 0.448485] tegra-reset 5000000.clock: registered 193 resets. [ 0.450320] iommu: Adding device d000000.bpmp to group 46 [ 0.450542] bpmp: ping status is 0 [ 0.450630] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.452238] bpmp d000000.bpmp: probe ok [ 0.454662] iommu: Adding device 2600000.dma to group 47 [ 0.455469] GPIO line 408 (w-disable1) hogged as output/high [ 0.455520] GPIO line 410 (w-disable2) hogged as output/high [ 0.455686] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.459476] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.461035] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.461061] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.461389] iommu: Adding device sound to group 49 [ 0.461727] iommu: Adding device 3510000.hda to group 50 [ 0.468227] iommu: Adding device c1a0000.aon to group 51 [ 0.468756] vdd-1v8-ap: 1800 mV [ 0.468969] vdd-ac-bat: 5000 mV [ 0.469178] vdd-3v3-disp-cvb: 3300 mV [ 0.469492] dummy_regulator_sdmmc3: 1800 mV [ 0.469688] vdd-3v3-cvb: 3300 mV [ 0.469879] vdd-1v8-cvb: 1800 mV [ 0.470069] vdd-fan: 5000 mV [ 0.470260] vdd-hdmi-5v0: 5000 mV [ 0.470460] vdd_sys_en: 1200 mV [ 0.493819] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.496343] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.496545] SCSI subsystem initialized [ 0.496791] usbcore: registered new interface driver usbfs [ 0.496834] usbcore: registered new interface driver hub [ 0.496871] usbcore: registered new device driver usb [ 0.498996] random: fast init done [ 0.506094] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.509502] vddio-ddr: at 1125 mV [ 0.513396] avdd_dsi_csi: 1200 mV [ 0.517373] vdd-1v8: 1800 mV [ 0.521373] vdd-3v3-sys: 3300 mV [ 0.522252] spmic-ldo0: at 1800 mV [ 0.522894] spmic-ldo1: at 800 mV [ 0.525373] vddio-3v3: 3300 mV [ 0.526036] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.529374] vdd-rtc: at 800 mV [ 0.530048] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.533372] spmic-ldo6: at 800 mV [ 0.537371] vdd-pex-1v00: 1000 mV [ 0.537952] dvdd-pex: 1000 mV [ 0.539904] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.540043] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.540211] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.540399] max77620 4-003c: max77620 probe successful [ 0.540762] media: Linux media interface: v0.10 [ 0.540797] Linux video capture interface: v2.00 [ 0.543031] pps_core: LinuxPPS API ver. 1 registered [ 0.543046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.543078] PTP clock support registered [ 0.543285] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.543475] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.543503] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.544570] trusty trusty: trusty version: Built: 09:23:15 Nov 22 2022 [ 0.544597] trusty trusty: selected api version: 3 (requested 3) [ 0.545701] Advanced Linux Sound Architecture Driver Initialized. [ 0.546166] Bluetooth: Core ver 2.22 [ 0.546237] NET: Registered protocol family 31 [ 0.546250] Bluetooth: HCI device and connection manager initialized [ 0.546266] Bluetooth: HCI socket layer initialized [ 0.546279] Bluetooth: L2CAP socket layer initialized [ 0.546301] Bluetooth: SCO socket layer initialized [ 0.547179] vdd-sys-bl: 3300 mV [ 0.548767] camchar: rtcpu character device driver loaded [ 0.549199] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.549287] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.550282] clocksource: Switched to clocksource arch_sys_counter [ 0.574935] VFS: Disk quotas dquot_6.6.0 [ 0.575023] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.575278] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.575713] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.575844] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.575859] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.575878] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.575895] nvmap_page_pool_init: Total RAM pages: 975193 [ 0.575907] nvmap_page_pool_init: nvmap page pool size: 121899 pages (476 MB) [ 0.575961] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.576424] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.578282] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.583689] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.583901] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.584249] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.584343] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.584494] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.584726] la/ptsa driver initialized. [ 0.584744] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.584756] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.585065] NET: Registered protocol family 2 [ 0.585152] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.586874] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.587045] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.587351] TCP: Hash tables configured (established 32768 bind 32768) [ 0.587408] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.587478] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.587732] NET: Registered protocol family 1 [ 0.588092] RPC: Registered named UNIX socket transport module. [ 0.588107] RPC: Registered udp transport module. [ 0.588118] RPC: Registered tcp transport module. [ 0.588129] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.588255] Trying to unpack rootfs image as initramfs... [ 0.797793] Freeing initrd memory: 7068K [ 0.812454] host1x 13e10000.host1x: initialized [ 0.813695] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.815806] audit: initializing netlink subsys (disabled) [ 0.815845] audit: type=2000 audit(0.696:1): initialized [ 0.816240] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.822798] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.823748] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.824253] 9p: Installing v9fs 9p2000 file system support [ 0.826297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 0.826372] io scheduler noop registered [ 0.826577] io scheduler cfq registered (default) [ 0.829343] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.841788] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 0.845391] iommu: Adding device 2993000.adsp to group 53 [ 0.845503] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.850510] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.851398] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.852198] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.852988] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.854942] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.855673] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.855975] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.858133] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.858182] tsec 15500000.tsec: initialized [ 0.859094] tsec 15100000.tsecb: initialized [ 0.861285] nvdec 15480000.nvdec: initialized [ 0.864934] falcon 15340000.vic: initialized [ 0.866049] falcon 154c0000.nvenc: initialized [ 0.867085] falcon 15380000.nvjpg: initialized [ 0.868830] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.870237] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.871601] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.872967] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.874354] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.875715] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.877084] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.878504] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.881083] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.881104] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.881150] tegradccommon 15200000.dc_common: dma mapping done [ 0.881839] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.881894] generic_infoframe_type: 0x87 [ 0.881974] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.882008] tegradc 15200000.nvdisplay: Display dc.ffffff800af50000 registered with id=0 [ 0.887574] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.887595] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.887611] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.887782] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.887798] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.888695] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.890645] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.890666] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.892793] tegradc 15200000.nvdisplay: probed [ 0.893668] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.894244] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.894290] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.895127] kfuse 3830000.kfuse: initialized [ 0.896402] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.899203] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.901257] console [ttyS0] disabled [ 0.901305] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 1.284002] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.688307] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.092614] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.094631] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.496924] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.901247] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.090865] console [ttyS0] enabled [ 3.091212] Console: switching to colour frame buffer device 240x67 [ 3.092241] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 3.092438] serial-tegra 3130000.serial: RX in PIO mode [ 3.093007] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 3.093972] [drm] Initialized [ 3.119270] brd: module loaded [ 3.129888] tegradc 15200000.nvdisplay: fb registered [ 3.130701] loop: module loaded [ 3.130743] tegra_profiler: version: 1.145, samples/io: 49/28 [ 3.130828] tegra_profiler: auth: init [ 3.131437] THERMAL EST: found 3 subdevs [ 3.131441] THERMAL EST num_resources: 0 [ 3.131444] [THERMAL EST subdev 0] [ 3.131447] [THERMAL EST subdev 1] [ 3.131450] [THERMAL EST subdev 2] [ 3.131459] THERMAL EST: Found 2 profiles, default profile is quiet [ 3.131735] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.131736] THERMAL EST: thz register success. [ 3.131819] THERMAL EST: end of probe, return err: 0 [ 3.132355] sd: No Scsi addr parsed to reserve index [ 3.132371] hisi_sas: driver version v1.6 [ 3.137584] tun: Universal TUN/TAP device driver, 1.6 [ 3.137586] tun: (C) 1999-2004 Max Krasnyansky [ 3.138962] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.138963] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.138994] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.138995] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.139025] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.139026] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.139055] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 3.139056] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.262374] gpio tegra-gpio wake21 for gpio=121(P:1) [ 3.267754] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.273814] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 3.280849] Parent Clock set for DC plld2 [ 3.318179] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.326181] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.348154] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 3.357537] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 3.365463] tegradc 15200000.nvdisplay: hdmi: BL set VIC 0 [ 3.370952] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 3.382244] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.390561] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 3.398106] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 55 e1 ac [ 3.404832] Using phyrst_lpmode = 1 from DT [ 3.411271] PPP generic driver version 2.4.2 [ 3.415671] PPP BSD Compression module registered [ 3.420389] PPP Deflate Compression module registered [ 3.425455] PPP MPPE Compression module registered [ 3.430256] NET: Registered protocol family 24 [ 3.434744] usbcore: registered new interface driver r8152 [ 3.440270] usbcore: registered new interface driver asix [ 3.445717] usbcore: registered new interface driver ax88179_178a [ 3.451853] usbcore: registered new interface driver cdc_ether [ 3.457716] usbcore: registered new interface driver net1080 [ 3.463412] usbcore: registered new interface driver cdc_subset [ 3.469364] usbcore: registered new interface driver zaurus [ 3.474981] usbcore: registered new interface driver cdc_ncm [ 3.480750] VFIO - User Level meta-driver version: 0.3 [ 3.486697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.493242] ehci-pci: EHCI PCI platform driver [ 3.497722] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.503914] ohci-pci: OHCI PCI platform driver [ 3.508391] ohci-platform: OHCI generic platform driver [ 3.516941] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.524070] tegra-xusb 3530000.xhci: extcon 0: ffffffc0ef8af400 id [ 3.530973] usbcore: registered new interface driver uas [ 3.536324] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 3.536345] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.536358] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.536452] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.536660] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.537093] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.537123] tegra-xusb 3530000.xhci: irq 68, io mem 0x03530000 [ 3.537252] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.537256] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.537260] usb usb1: Product: xHCI Host Controller [ 3.537263] usb usb1: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 3.537265] usb usb1: SerialNumber: 3530000.xhci [ 3.547039] hub 1-0:1.0: USB hub found [ 3.547083] hub 1-0:1.0: 4 ports detected [ 3.547430] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.547439] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.547564] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.547567] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.547570] usb usb2: Product: xHCI Host Controller [ 3.547572] usb usb2: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 3.547575] usb usb2: SerialNumber: 3530000.xhci [ 3.547857] hub 2-0:1.0: USB hub found [ 3.547880] hub 2-0:1.0: 3 ports detected [ 3.548306] Wake76 for irq=199 [ 3.548308] Wake77 for irq=199 [ 3.548309] Wake78 for irq=199 [ 3.548311] Wake79 for irq=199 [ 3.548312] Wake80 for irq=199 [ 3.548313] Wake81 for irq=199 [ 3.548314] Wake82 for irq=199 [ 3.548341] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 3.548345] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 3.570280] usb usb1: usb_suspend_both: status 0 [ 3.650322] usb usb2: usb_suspend_both: status 0 [ 3.718016] usbcore: registered new interface driver usb-storage [ 3.724096] usbcore: registered new interface driver usbserial [ 3.732855] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.739215] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 3.745850] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.751005] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.756630] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.762322] mousedev: PS/2 mouse device common for all mice [ 3.767965] usbcore: registered new interface driver xpad [ 3.904520] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.912903] Wake73 for irq=42 [ 3.917051] rtc rtc1: alarm rtc device [ 3.920827] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.927832] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.934075] i2c /dev entries driver [ 3.939308] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.950318] parse_throttle_dt_data: Num cap clks = 4 [ 3.955336] parse_throttle_dt_data: clk=mcpu type=1 [ 3.960222] parse_throttle_dt_data: clk=bcpu type=2 [ 3.965106] parse_throttle_dt_data: clk=gpu type=4 [ 3.969901] parse_throttle_dt_data: clk=emc type=3 [ 3.975314] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.981493] FAN dev name: pwm-fan [ 3.984872] FAN:gpio request success. [ 3.988546] FAN: can't find tach_gpio [ 3.992218] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 3.999458] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 4.005302] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 4.011926] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.017453] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.025029] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 4.032865] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 4.040696] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 4.048529] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.056359] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.064191] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.072020] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.079853] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.087772] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.096180] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.104051] device-mapper: uevent: version 1.0.3 [ 4.108991] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.117664] CPU EMC frequency mapping table: from device tree [ 4.125198] cpufreq: platform driver Initialization: pass [ 4.131154] cpuidle: Initializing cpuidle driver init for Denver cluster [ 4.137981] cpuidle: Initializing cpuidle driver init for A57 cluster [ 4.145216] sdhci: Secure Digital Host Controller Interface driver [ 4.151399] sdhci: Copyright(c) Pierre Ossman [ 4.155758] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.162368] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.171112] CMDQ: cmdq_platfm_init successful [ 4.175891] sdhci-tegra 3440000.sdhci: runtime pm disabled [ 4.181719] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 4.187573] sdhci: Sys addr: 0x00000000 | Version: 0x00000404 [ 4.193416] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 4.199262] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.206408] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 4.206415] sdhci: Present: 0x01fb00f0 | Host ctl: 0x00000000 [ 4.206421] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 4.206427] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000 [ 4.206433] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 4.206439] sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00fc1003 [ 4.206445] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 4.206451] sdhci: Caps: 0x3f6cd08c | Caps_1: 0x18006f77 [ 4.206456] sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 4.206460] sdhci: Host ctl2: 0x00003000 [ 4.206469] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 [ 4.206576] sdhci: =========================================== [ 4.206626] CQE: CMD_TIMING bit set for R1B DCMD [ 4.250180] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.250198] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz [ 4.292125] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.305806] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 4.307663] mmc0: periodic cache flush enabled [ 4.307669] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.318197] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 4.318298] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 4.318400] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 4.318489] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 4.331674] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 4.358047] sdhci: Sys addr: 0x00000000 | Version: 0x00000404 [ 4.363881] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 4.369716] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 4.375568] sdhci: Present: 0x01fb00f0 | Host ctl: 0x00000000 [ 4.381404] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 4.387239] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000 [ 4.393076] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 4.398912] sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00fc1003 [ 4.404749] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 4.410584] sdhci: Caps: 0x3f6cd08c | Caps_1: 0x18006f73 [ 4.416419] sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 4.422249] sdhci: Host ctl2: 0x00003000 [ 4.426177] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000 [ 4.432815] sdhci: =========================================== [ 4.482181] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.491499] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz [ 4.504888] mmc1: mmc_rescan_try_freq: trying to init card at 300000 H [ 5.970181] tegra-xusb 3530000.xhci: entering ELPG [ 5.977582] tegra-xusb 3530000.xhci: entering ELPG done [ 13.394193] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 13.400555] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 13.407168] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 13.412219] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 13.418830] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x1c [ 13.424313] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800040 [ 13.430057] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 13.435193] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 13.440447] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 13.447239] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 13.454463] Extcon AUX1(HDMI) enable [ 13.458394] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 13.465615] tegradc 15210000.nvdisplay: DT parsed successfully [ 13.471473] tegradc 15210000.nvdisplay: Display dc.ffffff800ba90000 registered with id=1 [ 13.479702] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 13.485974] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 13.499125] tegradc 15210000.nvdisplay: probed [ 13.503708] tegradc 15210000.nvdisplay: fb registered [ 13.511943] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 13.519079] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 13.519817] tegra-se-nvhost 15810000.se: initialized [ 13.520872] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 13.521321] tegra-se-nvhost 15820000.se: initialized [ 13.522271] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 13.522707] tegra-se-nvhost 15830000.se: initialized [ 13.523493] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 13.523904] tegra-se-nvhost 15840000.se: initialized [ 13.524793] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 13.525497] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 13.525618] hidraw: raw HID events driver (C) Jiri Kosina [ 13.526476] usbcore: registered new interface driver usbhid [ 13.526477] usbhid: USB HID core driver [ 13.529320] ashmem: initialized [ 13.531381] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 13.533029] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 13.538228] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 13.538354] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 13.538424] tegra186-cam-rtcpu b000000.rtcpu: no priority specified, using 99 as default [ 13.539073] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 13.539142] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 13.539184] tegra-capture-ivc ivc-b000000.rtcpu:ivccontrol@52c0: no priority specified, using 99 as default [ 13.539230] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 13.539273] tegra-capture-ivc ivc-b000000.rtcpu:ivccapture@72c0: no priority specified, using 99 as default [ 13.539313] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 13.539407] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 13.539697] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (48) [ 13.539699] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 13.685193] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 13.686787] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 13.687179] tegra186-aondbg aondbg: aondbg driver probe() OK [ 13.687579] register_ari_mca_banks: Registered MCA ROC:IOB [ 13.687891] register_ari_mca_banks: Registered MCA ROC:CCE [ 13.688625] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688627] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 13.688629] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 13.688671] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688673] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 13.688674] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 13.688714] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688716] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 13.688718] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 13.688757] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688758] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 13.688760] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 13.688802] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688804] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 13.688805] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 13.688846] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688850] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 13.688851] tegra18-bridge 2100000.axip2p: bridge probed OK [ 13.688898] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688902] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 13.688904] tegra18-bridge 2110000.axip2p: bridge probed OK [ 13.688949] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688953] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 13.688955] tegra18-bridge 2120000.axip2p: bridge probed OK [ 13.688994] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.688998] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 13.689000] tegra18-bridge 2130000.axip2p: bridge probed OK [ 13.689041] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.689043] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 13.689045] tegra18-bridge 2140000.axip2p: bridge probed OK [ 13.689084] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.689089] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 13.689090] tegra18-bridge 2150000.axip2p: bridge probed OK [ 13.689128] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.689133] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 13.689134] tegra18-bridge 2160000.axip2p: bridge probed OK [ 13.689172] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.689177] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 13.689178] tegra18-bridge 2170000.axip2p: bridge probed OK [ 13.689217] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.689222] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 13.689223] tegra18-bridge 2180000.axip2p: bridge probed OK [ 13.689263] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 13.689267] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 13.689269] tegra18-bridge 2190000.axip2p: bridge probed OK [ 13.689319] **** A57 ECC: Enabled [ 13.689321] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 13.689380] tegra18x_actmon d230000.actmon: in actmon_register()... [ 13.689739] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 13.690129] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 13.690264] denver_knobs_init:MTS_VERSION:61650191 [ 13.695847] nvpmodel: initialized successfully [ 13.705580] trusty-virtio trusty:virtio: initializing [ 13.705686] trusty_ipc virtio0: vring0: va(pa) ffffffc0e9d6a000(0) qsz 32 notifyid 1 [ 13.705692] trusty_ipc virtio0: vring1: va(pa) ffffffc0e9d70000(0) qsz 32 notifyid 2 [ 13.705756] trusty-virtio trusty:virtio: initializing done [ 13.705831] trusty_ipc virtio0: is online [ 13.706565] usbcore: registered new interface driver snd-usb-audio [ 13.722275] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 13.722411] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 13.725809] OPE platform probe [ 13.725875] OPE platform probe successful [ 13.772565] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 13.772639] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 13.772711] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 13.772780] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 13.772846] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 13.772914] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 13.772984] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 13.773052] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 13.773119] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 13.773194] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 13.773262] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 13.773332] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 13.773404] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 13.773472] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 13.773543] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 13.773612] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 13.773681] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 13.773750] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 13.773821] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 13.773889] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 13.781100] tegra-asoc: sound: ASoC: no source widget found for x HPL [ 13.781104] tegra-asoc: sound: ASoC: Failed to add route x HPL -> direct -> x Headphone [ 13.781122] tegra-asoc: sound: ASoC: no source widget found for x HPR [ 13.781124] tegra-asoc: sound: ASoC: Failed to add route x HPR -> direct -> x Headphone [ 13.781138] tegra-asoc: sound: ASoC: no source widget found for x SPK [ 13.781140] tegra-asoc: sound: ASoC: Failed to add route x SPK -> direct -> x Int Spk [ 13.781154] tegra-asoc: sound: ASoC: no sink widget found for x MIC1LP [ 13.781155] tegra-asoc: sound: ASoC: Failed to add route x Mic -> direct -> x MIC1LP [ 13.781169] tegra-asoc: sound: ASoC: no sink widget found for x MIC1RP [ 13.781171] tegra-asoc: sound: ASoC: Failed to add route x Mic -> direct -> x MIC1RP [ 13.781185] tegra-asoc: sound: ASoC: no sink widget found for x MIC1LM [ 13.781186] tegra-asoc: sound: ASoC: Failed to add route x Mic -> direct -> x MIC1LM [ 13.793145] u32 classifier [ 13.793146] Actions configured [ 13.793203] Initializing XFRM netlink socket [ 13.793746] NET: Registered protocol family 10 [ 13.794340] NET: Registered protocol family 17 [ 13.794348] NET: Registered protocol family 15 [ 13.794403] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 13.794441] Bluetooth: RFCOMM socket layer initialized [ 13.794449] Bluetooth: RFCOMM ver 1.11 [ 13.794452] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 13.794456] Bluetooth: HIDP socket layer initialized [ 13.794469] 9pnet: Installing 9P2000 support [ 13.794502] Key type dns_resolver registered [ 13.799441] Registered cp15_barrier emulation handler [ 13.799455] Registered setend emulation handler [ 13.800310] registered taskstats version 1 [ 13.802660] isp 15600000.isp: initialized [ 13.802723] driver not enabled, cannot register any devices [ 13.805642] nvcsi 150c0000.nvcsi: initialized [ 13.805653] driver not enabled, cannot register any devices [ 13.806476] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 13.808958] Wake83 for irq=51 [ 13.809036] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 13.809176] input: gpio-keys as /devices/gpio-keys/input/input2 [ 13.810293] tegra-vi4 15700000.vi: initialized [ 13.812056] driver not enabled, cannot register any devices [ 13.841217] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:22 UTC (946688422) [ 13.841896] mmcblk mmc0:0001: Card claimed for testing. [ 13.858793] bpmp: mounted debugfs mirror [ 13.859584] bwmgr: missing cdev-type property [ 13.863576] ALSA device list: [ 13.863579] #0: tegra-hda at 0x3518000 irq 381 [ 13.863580] #1: tegra-snd-t186ref-mobile-rt565x [ 14.539348] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 14.544855] tegradc 15210000.nvdisplay: blank - powerdown [ 14.547329] Freeing unused kernel memory: 8832K [ 14.554805] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 14.563160] Extcon DP: HPD disabled [ 14.566654] hpd: hpd_switch 0 [ 14.569620] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 14.574512] Root device found: mmcblk0p1 [ 14.575579] Found dev node: /dev/mmcblk0p1 [ 14.584270] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 14.590201] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 14.717331] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 14.722658] EXT4-fs (mmcblk0p1): recovery complete [ 14.732322] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 14.742394] Rootfs mounted over mmcblk0p1 [ 14.761166] Switching from initrd to actual rootfs [ 14.844279] systemd[1]: System time before build time, advancing clock. [ 14.873254] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.887423] cgroup: cgroup2: unknown option "nsdelegate" [ 14.900465] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 14.922670] systemd[1]: Detected architecture arm64. [ 14.946707] systemd[1]: Set hostname to . [ 15.031489] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 15.048659] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 15.175602] random: systemd: uninitialized urandom read (16 bytes read) [ 15.182270] systemd[1]: Reached target User and Group Name Lookups. [ 15.189108] random: systemd: uninitialized urandom read (16 bytes read) [ 15.197155] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 15.206672] random: systemd: uninitialized urandom read (16 bytes read) [ 15.213391] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 15.222446] systemd[1]: Created slice System Slice. [ 15.227607] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 15.266077] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 15.287433] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 15.322160] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 15.330665] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 15.338379] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 15.454198] random: crng init done [ 15.457604] random: 7 urandom warning(s) missed due to ratelimiting [ 15.732246] systemd-journald[2204]: Received request to flush runtime journal from PID 1 [ 16.159482] using random self ethernet address [ 16.166814] using random host ethernet address [ 16.381055] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 16.389672] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 16.399783] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 16.417378] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 16.426640] systemd-journald[2204]: /dev/kmsg buffer overrun, some messages lost. [ 16.846708] using random self ethernet address [ 16.870284] using random host ethernet address [ 17.195207] tegra-xudc-new 3550000.xudc: setup request failed: -22 [ 17.382076] CPU1: shutdown [ 17.462594] CPU2: shutdown [ 18.567842] Bridge firewalling registered