[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06aa000 [ 0.000000] Found lut_mem: 00002008@a06a4000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a4000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix=_b boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29964(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182412K/8124404K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 188328K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000625] Console: colour dummy device 80x25 [ 0.000636] console [tty0] enabled [ 0.000644] bootconsole [tegra_comb_uart0] disabled [ 0.000658] kmemleak: Kernel memory leak detector disabled [ 0.000677] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000692] pid_max: default: 32768 minimum: 301 [ 0.001749] Security Framework initialized [ 0.002350] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002360] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003973] ftrace: allocating 47077 entries in 184 pages [ 0.403585] sched-energy: Sched-energy-costs installed from DT [ 0.403605] ASID allocator initialised with 65536 entries [ 0.439371] tegra-id: chipid=21917. [ 0.439383] tegra-id: opt_subrevision=1. [ 0.439410] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.439423] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.439436] DTB Build time: Jul 26 2021 12:22:25 [ 0.487244] CPU1: Booted secondary processor [4e0f0040] [ 0.519356] CPU2: Booted secondary processor [4e0f0040] [ 0.551414] CPU3: Booted secondary processor [4e0f0040] [ 0.583678] CPU4: Booted secondary processor [4e0f0040] [ 0.615748] CPU5: Booted secondary processor [4e0f0040] [ 0.615976] Brought up 6 CPUs [ 0.616017] SMP: Total of 6 processors activated. [ 0.616033] CPU features: detected feature: Privileged Access Never [ 0.616040] CPU features: detected feature: LSE atomic instructions [ 0.616046] CPU features: detected feature: User Access Override [ 0.616052] CPU features: detected feature: 32-bit EL0 Support [ 0.617577] CPU: All CPU(s) started at EL2 [ 0.617641] alternatives: patching kernel code [ 0.624036] devtmpfs: initialized [ 0.662900] Initilizing CustomIPI irq domain [ 0.663098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.663112] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676637] pinctrl core: initialized pinctrl subsystem [ 0.676897] OS set in device tree is not L4T. [ 0.677215] regulator-dummy: no parameters [ 0.677444] Initializing plugin-manager [ 0.677500] Plugin module not found [ 0.677543] Plugin-manager status disabled [ 0.678650] NET: Registered protocol family 16 [ 0.700418] pstore: using zlib compression [ 0.700450] console [pstore-1] enabled [ 0.700460] pstore: Registered ramoops as persistent store backend [ 0.700470] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.714619] cpuidle: using governor menu [ 0.715648] bpmp: waiting for handshake [ 0.715660] bpmp: handshake completed [ 0.715677] bpmp: synchronizing channels [ 0.715689] bpmp: channels synchronized [ 0.715702] bpmp: mail init ok [ 0.718323] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.718504] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.718516] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.718523] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.718529] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.718535] t19x-arm-smmu 12000000.iommu: nested translation [ 0.718543] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.718551] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.718622] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.718630] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.718636] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.721694] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.721733] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.724325] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.725549] tegra_aon_clk_init: ok [ 0.725563] Registering BPMP clocks... [ 0.725660] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.726195] Serial: AMBA PL011 UART driver [ 0.726316] tegra_powergate_init: DONE [ 0.726411] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.726427] DTB Build time: Jul 26 2021 12:22:25 [ 0.729463] Tegra reboot handler registered. [ 0.738251] iommu: Adding device 14160000.pcie to group 0 [ 0.738966] iommu: Adding device 141a0000.pcie to group 1 [ 0.740591] iommu: Adding device 2490000.ether_qos to group 2 [ 0.741130] iommu: Adding device 3100000.serial to group 3 [ 0.741631] iommu: Adding device 3110000.serial to group 4 [ 0.742060] iommu: Adding device 3140000.serial to group 5 [ 0.742725] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.743125] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.743154] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.743178] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.743187] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.743248] tegra-pmc: PMC Prod config success [ 0.743459] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.743474] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.743825] iommu: Adding device 3400000.sdhci to group 6 [ 0.744321] iommu: Adding device 3210000.spi to group 7 [ 0.744738] iommu: Adding device 3230000.spi to group 8 [ 0.745171] iommu: Adding device 3270000.spi to group 9 [ 0.746549] iommu: Adding device 3160000.i2c to group 10 [ 0.747020] iommu: Adding device c240000.i2c to group 11 [ 0.747614] iommu: Adding device 3180000.i2c to group 12 [ 0.748121] iommu: Adding device 3190000.i2c to group 13 [ 0.748718] iommu: Adding device 31b0000.i2c to group 14 [ 0.749135] iommu: Adding device 31c0000.i2c to group 15 [ 0.749610] iommu: Adding device c250000.i2c to group 16 [ 0.750076] iommu: Adding device 31e0000.i2c to group 17 [ 0.750653] iommu: Adding device sound to group 18 [ 0.751331] iommu: Adding device 3510000.hda to group 19 [ 0.751891] iommu: Adding device bc00000.rtcpu to group 20 [ 0.753951] iommu: Adding device 13e10000.host1x to group 21 [ 0.754443] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.754834] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.755233] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.755700] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.756139] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.756503] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.756951] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.757373] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.757904] iommu: Adding device 15340000.vic to group 30 [ 0.758363] iommu: Adding device 15380000.nvjpg to group 31 [ 0.758890] iommu: Adding device 15500000.tsec to group 32 [ 0.759182] iommu: Adding device 15100000.tsecb to group 33 [ 0.759515] iommu: Adding device 15480000.nvdec to group 34 [ 0.759839] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.760129] iommu: Adding device 154c0000.nvenc to group 36 [ 0.760414] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.760875] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.761292] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.761893] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.762053] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06aa000(800000) [ 0.762065] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06a4000(3000) [ 0.766084] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.766154] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.766847] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.766905] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.768843] iommu: Adding device 15c10000.vi to group 42 [ 0.769031] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.769550] iommu: Adding device 14800000.isp to group 43 [ 0.770620] iommu: Adding device 16000000.pva0 to group 44 [ 0.771227] iommu: Adding device 16800000.pva1 to group 45 [ 0.771621] iommu: Adding device 15810000.se to group 46 [ 0.772085] iommu: Adding device 15820000.se to group 47 [ 0.772432] iommu: Adding device 15830000.se to group 48 [ 0.772724] iommu: Adding device 15840000.se to group 49 [ 0.773087] iommu: Adding device c1a0000.aon to group 50 [ 0.775024] iommu: Adding device d000000.bpmp to group 51 [ 0.775396] bpmp: ping status is 0 [ 0.775518] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.778598] bpmp d000000.bpmp: probe ok [ 0.780522] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.781237] iommu: Adding device smmu_test to group 52 [ 0.782476] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.782497] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.782516] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.782536] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.782560] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.782579] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.782598] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.782616] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.782648] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.782666] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.782684] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.782702] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.782721] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.782739] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.782757] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.782775] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.782792] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.782895] mc-err: mcerr ops are set to t19x [ 0.789062] iommu: Adding device 2600000.dma to group 53 [ 0.793910] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.795224] GPIO line 339 (wifi-enable) hogged as output/high [ 0.795267] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.795304] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.795655] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.803717] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.803790] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.803826] GPIO line 266 (w-disable1) hogged as output/high [ 0.803859] GPIO line 264 (w-disable2) hogged as output/high [ 0.803916] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.804246] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.806745] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.806756] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.806789] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.807602] iommu: Adding device 3550000.xudc to group 54 [ 0.808286] iommu: Adding device 3610000.xhci to group 55 [ 0.810375] arm64_ras arm64_ras: probed [ 0.810806] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.810851] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.810950] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.811012] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.811081] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.811146] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.811343] carmel_ras_enable: RAS enabled on cpu0 [ 0.811505] carmel_ras_enable: RAS enabled on cpu1 [ 0.811723] carmel_ras_enable: RAS enabled on cpu2 [ 0.811911] carmel_ras_enable: RAS enabled on cpu3 [ 0.812105] carmel_ras_enable: RAS enabled on cpu4 [ 0.812287] carmel_ras_enable: RAS enabled on cpu5 [ 0.812373] carmel_ras carmel_ras: probed [ 0.813548] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.814050] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.815064] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.816089] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.817062] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.817420] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.818788] vdd-ac-bat: 5000 mV [ 0.819278] vdd-sdmmc1-sw: 3300 mV [ 0.819654] vdd-1v8-sd: 1800 mV [ 0.819973] vdd-3v3-cvb: 3300 mV [ 0.820297] vdd-1v8-cvb: 1800 mV [ 0.820692] vdd-epb-1v0: 1000 mV [ 0.820867] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.821137] avdd-cam-2v8: 2800 mV [ 0.821513] vdd-fan: 5000 mV [ 0.821867] vdd-hdmi-5v0: 5000 mV [ 0.822192] vdd_sys_en: 1200 mV [ 0.858677] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.863467] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.863831] SCSI subsystem initialized [ 0.864074] libata version 3.00 loaded. [ 0.864335] usbcore: registered new interface driver usbfs [ 0.864388] usbcore: registered new interface driver hub [ 0.864436] usbcore: registered new device driver usb [ 0.875417] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.878286] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.887774] vdd-1v0: at 1000 mV [ 0.891761] vdd-1v8-hs: at 1800 mV [ 0.895781] vdd-1v8-ls: at 1800 mV [ 0.899794] vdd-1v8-ao: at 1800 mV [ 0.903838] vddio-ddr-1v1: at 1100 mV [ 0.907593] vdd-rtc: at 800 mV [ 0.908563] spmic-ldo1: at 2375 mV [ 0.915637] vdd-ao-3v3: at 3300 mV [ 0.923657] vddio-emmc-3v3: at 3300 mV [ 0.924700] spmic-ldo4: at 1587 mV [ 0.931689] vdd-usb-3v3: at 3300 mV [ 0.939716] vddio-sdmmc1-3v3: at 3300 mV [ 0.943755] vdd-csi-1v2: at 1200 mV [ 0.944878] spmic-ldo8: at 1800 mV [ 0.949259] GPIO line 246 (gpio_default) hogged as output/high [ 0.950225] GPIO line 247 (gpio_default) hogged as output/high [ 0.950567] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.950907] max77620 4-003c: max77620 probe successful [ 0.951456] media: Linux media interface: v0.10 [ 0.951498] Linux video capture interface: v2.00 [ 0.953022] pps_core: LinuxPPS API ver. 1 registered [ 0.953029] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.953128] PTP clock support registered [ 0.953507] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.953738] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.953770] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.956478] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.956540] trusty trusty: selected api version: 3 (requested 3) [ 0.958026] Advanced Linux Sound Architecture Driver Initialized. [ 0.958645] Bluetooth: Core ver 2.22 [ 0.958684] NET: Registered protocol family 31 [ 0.958689] Bluetooth: HCI device and connection manager initialized [ 0.958701] Bluetooth: HCI socket layer initialized [ 0.958709] Bluetooth: L2CAP socket layer initialized [ 0.958777] Bluetooth: SCO socket layer initialized [ 0.961302] camchar: rtcpu character device driver loaded [ 0.961762] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.961858] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.962735] clocksource: Switched to clocksource arch_sys_counter [ 1.006980] VFS: Disk quotas dquot_6.6.0 [ 1.007067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.007462] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.008652] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.008696] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.008883] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.008889] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.008901] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.008909] nvmap_page_pool_init: Total RAM pages: 1984019 [ 1.008914] nvmap_page_pool_init: nvmap page pool size: 248002 pages (968 MB) [ 1.009064] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.009395] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.011732] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.024384] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.024640] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.024868] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.025058] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.025242] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.026469] la/ptsa driver initialized. [ 1.026815] NET: Registered protocol family 2 [ 1.027693] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.028051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.028667] TCP: Hash tables configured (established 65536 bind 65536) [ 1.028714] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.028831] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.029297] NET: Registered protocol family 1 [ 1.029792] RPC: Registered named UNIX socket transport module. [ 1.029797] RPC: Registered udp transport module. [ 1.029802] RPC: Registered tcp transport module. [ 1.029806] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.029817] PCI: CLS 0 bytes, default 64 [ 1.030113] Trying to unpack rootfs image as initramfs... [ 1.246617] Freeing initrd memory: 7068K [ 1.270508] host1x 13e10000.host1x: initialized [ 1.272254] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.277000] audit: initializing netlink subsys (disabled) [ 1.277043] audit: type=2000 audit(0.896:1): initialized [ 1.277788] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.288731] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.290084] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.290815] 9p: Installing v9fs 9p2000 file system support [ 1.295807] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.295933] io scheduler noop registered [ 1.296183] io scheduler cfq registered (default) [ 1.299886] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.300953] random: fast init done [ 1.334446] iommu: Adding device 2993000.adsp to group 56 [ 1.446921] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.447863] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.460086] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.460521] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.461072] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.461451] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.461847] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.465127] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.465301] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.468081] tsec 15500000.tsec: initialized [ 1.469642] tsec 15100000.tsecb: initialized [ 1.473498] nvdec 15480000.nvdec: initialized [ 1.476198] nvdec 15140000.nvdec1: initialized [ 1.482202] falcon 15340000.vic: initialized [ 1.484132] falcon 15380000.nvjpg: initialized [ 1.486229] falcon 154c0000.nvenc: initialized [ 1.488032] falcon 15a80000.nvenc1: initialized [ 1.491533] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.493213] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.494893] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.496485] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.498132] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.499624] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.501106] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.502613] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.506259] t194-nvcsi 15a00000.nvcsi: initialized [ 1.511750] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.512109] scare-pigeon 14b00000.isp-thi: initialized [ 1.517472] pva 16000000.pva0: initialized [ 1.522786] pva 16800000.pva1: initialized [ 1.527324] nvdla 15880000.nvdla0: initialized [ 1.531669] nvdla 158c0000.nvdla1: initialized [ 1.532923] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.532936] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.532991] tegradccommon 15200000.dc_common: dma mapping done [ 1.533718] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.533728] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.533982] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.534029] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.534278] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.534285] tegra_cec 3960000.tegra_cec: probed [ 1.534922] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.534977] generic_infoframe_type: 0x87 [ 1.535068] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.535097] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.539660] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.539668] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.539673] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.539892] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.539902] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.540732] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.543507] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.543519] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.546314] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.547232] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.547241] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.547525] tegradc 15200000.nvdisplay: probed [ 1.547720] kfuse 3830000.kfuse: initialized [ 1.553822] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.556748] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.557915] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.558769] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.560036] console [ttyTCU0] enabled [ 1.560388] [drm] Initialized [ 1.573710] brd: module loaded [ 1.579890] loop: module loaded [ 1.579957] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.580109] tegra_profiler: auth: init [ 1.580805] THERMAL EST: found 3 subdevs [ 1.580812] THERMAL EST num_resources: 0 [ 1.580820] [THERMAL EST subdev 0] [ 1.580827] [THERMAL EST subdev 1] [ 1.580833] [THERMAL EST subdev 2] [ 1.580847] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.581219] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.581225] THERMAL EST: thz register success. [ 1.581413] THERMAL EST: end of probe, return err: 0 [ 1.582085] sd: No Scsi addr parsed to reserve index [ 1.582120] hisi_sas: driver version v1.6 [ 1.588619] Console: switching to colour frame buffer device 240x67 [ 1.588744] tegradc 15200000.nvdisplay: fb registered [ 1.589021] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.589609] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.589705] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.595978] Parent Clock set for DC plld2 [ 1.597466] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.597474] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.597486] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.597812] 1 ofpart partitions found on MTD device spi6.0 [ 1.597819] Creating 1 MTD partitions on "spi6.0": [ 1.597828] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.605647] libphy: Fixed MDIO Bus: probed [ 1.606340] tun: Universal TUN/TAP device driver, 1.6 [ 1.606345] tun: (C) 1999-2004 Max Krasnyansky [ 1.607187] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.607193] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.607258] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.607262] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.607310] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.607316] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.607360] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.607365] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.662636] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.663290] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.663304] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.688931] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.688937] Extcon AUX1(HDMI) enable [ 1.689410] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.689439] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.689519] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.689565] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 1.689777] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.689786] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.698346] tegradc 15210000.nvdisplay: probed [ 1.698796] tegradc 15210000.nvdisplay: fb registered [ 1.702092] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.702101] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.702114] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.702126] tegradc 15210000.nvdisplay: blank - powerdown [ 1.702140] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.702145] Extcon DP: HPD disabled [ 1.702150] hpd: hpd_switch 0 [ 1.702156] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.702168] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.702178] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.821839] tegradc 15200000.nvdisplay: blank - powerdown [ 1.853655] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.854208] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3d 76 71 [ 1.854222] Using phyrst_lpmode = 1 from DT [ 1.854329] libphy: dwc_phy: probed [ 1.856810] PPP generic driver version 2.4.2 [ 1.857259] PPP BSD Compression module registered [ 1.857264] PPP Deflate Compression module registered [ 1.857281] PPP MPPE Compression module registered [ 1.857285] NET: Registered protocol family 24 [ 1.857360] usbcore: registered new interface driver r8152 [ 1.857408] usbcore: registered new interface driver asix [ 1.857455] usbcore: registered new interface driver ax88179_178a [ 1.857487] usbcore: registered new interface driver cdc_ether [ 1.857516] usbcore: registered new interface driver net1080 [ 1.857547] usbcore: registered new interface driver cdc_subset [ 1.857577] usbcore: registered new interface driver zaurus [ 1.857629] usbcore: registered new interface driver cdc_ncm [ 1.857887] VFIO - User Level meta-driver version: 0.3 [ 1.859145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.859158] ehci-pci: EHCI PCI platform driver [ 1.859220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.859227] ohci-pci: OHCI PCI platform driver [ 1.859260] ohci-platform: OHCI generic platform driver [ 1.862973] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.862978] Extcon AUX1(HDMI) disable [ 1.864187] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.866310] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4e7c400 id [ 1.866850] usbcore: registered new interface driver uas [ 1.866908] usbcore: registered new interface driver usb-storage [ 1.867034] usbcore: registered new interface driver usbserial [ 1.868963] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.868994] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.869018] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.869740] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.869783] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.870011] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.870083] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.870109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.870116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.870121] usb usb1: Product: xHCI Host Controller [ 1.870126] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.870131] usb usb1: SerialNumber: 3610000.xhci [ 1.870624] hub 1-0:1.0: USB hub found [ 1.870667] hub 1-0:1.0: 4 ports detected [ 1.871157] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.871165] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.871191] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.871343] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.871377] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.871387] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.871477] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.871647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.871653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.871658] usb usb2: Product: xHCI Host Controller [ 1.871663] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.871667] usb usb2: SerialNumber: 3610000.xhci [ 1.872339] hub 2-0:1.0: USB hub found [ 1.872383] hub 2-0:1.0: 4 ports detected [ 1.872455] mousedev: PS/2 mouse device common for all mice [ 1.872652] usbcore: registered new interface driver xpad [ 1.873530] Wake76 for irq=199 [ 1.873534] Wake77 for irq=199 [ 1.873536] Wake78 for irq=199 [ 1.873539] Wake79 for irq=199 [ 1.873542] Wake80 for irq=199 [ 1.873545] Wake81 for irq=199 [ 1.873547] Wake82 for irq=199 [ 1.873635] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.873642] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.888568] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.889743] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.970844] tegradc 15200000.nvdisplay: unblank [ 1.972627] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.972911] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.975760] usb usb2: usb_suspend_both: status 0 [ 1.984034] Parent Clock set for DC plld2 [ 1.992624] tegradc 15200000.nvdisplay: hdmi: tmds rate:594000K prod-setting:prod_c_hdmi_300m_600m [ 1.994317] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.998837] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.000197] Wake73 for irq=42 [ 2.001478] rtc rtc1: alarm rtc device [ 2.001499] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.001524] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.001694] i2c /dev entries driver [ 2.004125] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.004661] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.004669] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.005267] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.028765] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.028817] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.028945] imx219 9-0010: board setup failed [ 2.029016] imx219: probe of 9-0010 failed with error -121 [ 2.029476] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.052720] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.052766] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.052856] imx219 10-0010: board setup failed [ 2.052920] imx219: probe of 10-0010 failed with error -121 [ 2.054020] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.060807] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.061182] FAN dev name: pwm-fan [ 2.061229] FAN:gpio request success. [ 2.061240] FAN: can't find tach_gpio [ 2.061249] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.061276] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.061517] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.061523] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.062067] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.062075] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.062081] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.062086] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.062092] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.062101] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.062130] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.062136] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.062142] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.062148] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.063140] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 2.063144] Extcon AUX1(HDMI) enable [ 2.063223] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.064199] device-mapper: uevent: version 1.0.3 [ 2.064695] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.068278] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.069369] cpuidle: Initializing cpuidle driver [ 2.070155] sdhci: Secure Digital Host Controller Interface driver [ 2.070157] sdhci: Copyright(c) Pierre Ossman [ 2.070160] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.070500] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.071337] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.073403] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 246 [ 2.077880] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 2.078271] tegra-se-nvhost 15810000.se: initialized [ 2.079458] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.080480] tegra-se-nvhost 15820000.se: initialized [ 2.081586] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.082580] tegra-se-nvhost 15830000.se: initialized [ 2.083261] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.084204] tegra-se-nvhost 15840000.se: initialized [ 2.085112] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.086269] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.086408] hidraw: raw HID events driver (C) Jiri Kosina [ 2.088146] usbcore: registered new interface driver usbhid [ 2.088148] usbhid: USB HID core driver [ 2.092284] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.093303] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.093739] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.094400] denver_knobs_init:MTS_VERSION:53250041 [ 2.094797] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.095452] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.096064] t19x_cache tegra-cache: probed [ 2.098289] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.098295] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.098755] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.099135] PLL_AON clock registered [ 2.100206] Clocks initialized successfully [ 2.101688] nvpmodel: initialized successfully [ 2.102777] trusty-virtio trusty:virtio: initializing [ 2.102977] trusty_ipc virtio0: vring0: va(pa) ffffffc1e265e000(0) qsz 32 notifyid 1 [ 2.102989] trusty_ipc virtio0: vring1: va(pa) ffffffc1e275c000(0) qsz 32 notifyid 2 [ 2.103156] trusty-virtio trusty:virtio: initializing done [ 2.103375] trusty_ipc virtio0: is online [ 2.103727] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.104216] usbcore: registered new interface driver snd-usb-audio [ 2.118217] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 2.118221] Extcon HDMI: HPD enabled [ 2.118260] tegradc 15200000.nvdisplay: hdmi: plugged [ 2.122881] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.123007] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.123971] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.124166] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.124416] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.124668] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.206770] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.217275] OPE platform probe [ 2.217399] OPE platform probe successful [ 2.251099] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 2.251108] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.251113] usb 1-2: Product: 4-Port USB 2.0 Hub [ 2.251117] usb 1-2: Manufacturer: Generic [ 2.252533] hub 1-2:1.0: USB hub found [ 2.253574] hub 1-2:1.0: 4 ports detected [ 2.293412] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.293553] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.293687] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.293816] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.293941] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.294060] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.294190] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.294327] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.294496] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.294640] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.294820] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.294928] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.295027] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.295187] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.295288] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.295396] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.295541] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.295647] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.295754] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.295860] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.325726] u32 classifier [ 2.325733] Actions configured [ 2.325812] Initializing XFRM netlink socket [ 2.326421] NET: Registered protocol family 10 [ 2.327258] NET: Registered protocol family 17 [ 2.327273] NET: Registered protocol family 15 [ 2.327329] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.327419] Bluetooth: RFCOMM socket layer initialized [ 2.327433] Bluetooth: RFCOMM ver 1.11 [ 2.327440] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.327446] Bluetooth: HIDP socket layer initialized [ 2.327465] 9pnet: Installing 9P2000 support [ 2.327502] Key type dns_resolver registered [ 2.327719] Registered cp15_barrier emulation handler [ 2.327731] Registered setend emulation handler [ 2.329154] registered taskstats version 1 [ 2.329586] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.330938] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.330955] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.330964] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.330969] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.343716] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.364462] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 2.407230] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 2.407238] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.407243] usb 2-3: Product: 4-Port USB 3.0 Hub [ 2.407247] usb 2-3: Manufacturer: Generic [ 2.424048] hub 2-3:1.0: USB hub found [ 2.426223] hub 2-3:1.0: 4 ports detected [ 2.442760] tegra-pcie-dw 14160000.pcie: link is up [ 2.442947] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.442956] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.442969] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.442975] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.442980] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.443008] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.443191] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.443411] iommu: Adding device 0004:00:00.0 to group 58 [ 2.443803] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.443920] pci 0004:01:00.0: reg 0x10: [io 0x1000-0x10ff] [ 2.444082] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 2.444807] pci 0004:01:00.0: supports D1 D2 [ 2.444811] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.445139] iommu: Adding device 0004:01:00.0 to group 59 [ 2.460878] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.460885] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.460894] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.460977] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.461004] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.461010] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.461018] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.461038] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.461097] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.461379] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.461385] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.461391] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.461479] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.462910] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.463097] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.463105] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.488249] mmc0: hw tuning done ... [ 2.488284] mmc0: new ultra high speed SDR104 SDXC card at address e624 [ 2.488655] mmcblk0: mmc0:e624 SN128 119 GiB [ 2.493924] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.514760] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.535899] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 2.535906] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.535910] usb 1-3: Product: Bluetooth Radio [ 2.535914] usb 1-3: Manufacturer: Realtek [ 2.535918] usb 1-3: SerialNumber: 00e04c000001 [ 2.550762] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.571093] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.571118] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.571129] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.571135] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.615310] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.615315] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.814730] usb 1-2: usb_suspend_both: status 0 [ 3.085905] tegra-pcie-dw 141a0000.pcie: link is down [ 3.086145] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.086157] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.086165] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.086171] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.086177] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.086220] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.086389] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.086632] iommu: Adding device 0005:00:00.0 to group 60 [ 3.087019] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.087042] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.087295] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.087325] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.087476] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.087652] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.087722] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.087829] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.087992] iommu: Removing device 0005:00:00.0 from group 60 [ 3.088058] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.089754] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.099391] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 3.104422] tegra194-isp5 14800000.isp: initialized [ 3.111080] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.113689] tegra194-vi5 15c10000.vi: initialized [ 3.118242] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.118343] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.118572] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.122943] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.122962] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.122966] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.123065] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.123098] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.123103] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.127052] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.127095] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.127100] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.127420] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.127454] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.127459] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.127816] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.127853] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.127858] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.128060] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.128851] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.150990] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 3.171257] usb 2-3.1: LPM exit latency is zeroed, disabling LPM. [ 3.172060] usb 2-3.1: New USB device found, idVendor=2560, idProduct=c1d1 [ 3.172066] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.172071] usb 2-3.1: Product: See3CAM_CU135 [ 3.172075] usb 2-3.1: Manufacturer: e-con systems [ 3.172079] usb 2-3.1: SerialNumber: 0620C204 [ 3.174429] hid-generic 0003:2560:C1D1.0001: hidraw0: USB HID v1.11 Device [e-con systems See3CAM_CU135] on usb-3610000.xhci-3.1/input2 [ 3.206653] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.206976] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.207153] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.207328] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.207648] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.207735] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.207918] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 3.207922] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.208838] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.209266] Wake83 for irq=211 [ 3.209332] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.209406] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.209548] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.239725] tegra_rtc c2a0000.rtc: setting system clock to 2022-03-02 08:07:08 UTC (1646208428) [ 3.240250] mmcblk mmc0:e624: Card claimed for testing. [ 3.254985] usb 2-3.2: new SuperSpeed USB device number 4 using tegra-xusb [ 3.275287] usb 2-3.2: LPM exit latency is zeroed, disabling LPM. [ 3.276073] usb 2-3.2: New USB device found, idVendor=2560, idProduct=c1d1 [ 3.276079] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.276083] usb 2-3.2: Product: See3CAM_CU135 [ 3.276088] usb 2-3.2: Manufacturer: e-con systems [ 3.276108] usb 2-3.2: SerialNumber: 1F128409 [ 3.277898] bpmp: mounted debugfs mirror [ 3.278598] hid-generic 0003:2560:C1D1.0002: hidraw1: USB HID v1.11 Device [e-con systems See3CAM_CU135] on usb-3610000.xhci-3.2/input2 [ 3.284024] ALSA device list: [ 3.284030] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.284034] #1: jetson-xaviernx-ape [ 3.285405] Freeing unused kernel memory: 8640K [ 3.324981] Root device found: mmcblk0p1 [ 3.326825] Found dev node: /dev/mmcblk0p1 [ 3.359006] usb 2-3.3: new SuperSpeed USB device number 5 using tegra-xusb [ 3.379313] usb 2-3.3: LPM exit latency is zeroed, disabling LPM. [ 3.380068] usb 2-3.3: New USB device found, idVendor=2560, idProduct=c1d1 [ 3.380074] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.380079] usb 2-3.3: Product: See3CAM_CU135 [ 3.380084] usb 2-3.3: Manufacturer: e-con systems [ 3.380088] usb 2-3.3: SerialNumber: 3010D900 [ 3.382751] hid-generic 0003:2560:C1D1.0003: hidraw2: USB HID v1.11 Device [e-con systems See3CAM_CU135] on usb-3610000.xhci-3.3/input2 [ 3.462962] usb 2-3.4: new SuperSpeed USB device number 6 using tegra-xusb [ 3.483338] usb 2-3.4: LPM exit latency is zeroed, disabling LPM. [ 3.484173] usb 2-3.4: New USB device found, idVendor=2560, idProduct=c1d1 [ 3.484180] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.484184] usb 2-3.4: Product: See3CAM_CU135 [ 3.484188] usb 2-3.4: Manufacturer: e-con systems [ 3.484192] usb 2-3.4: SerialNumber: 3007D900 [ 3.486929] hid-generic 0003:2560:C1D1.0004: hidraw3: USB HID v1.11 Device [e-con systems See3CAM_CU135] on usb-3610000.xhci-3.4/input2 [ 3.528779] EXT4-fs (mmcblk0p1): recovery complete [ 3.529748] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.532253] Rootfs mounted over mmcblk0p1 [ 3.549743] Switching from initrd to actual rootfs [ 3.827298] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.832907] cgroup: cgroup2: unknown option "nsdelegate" [ 3.873479] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.874445] systemd[1]: Detected architecture arm64. [ 3.880323] systemd[1]: Set hostname to . [ 4.558945] random: systemd: uninitialized urandom read (16 bytes read) [ 4.559141] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 4.559153] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 4.563218] systemd[1]: Created slice system-modprobe.slice. [ 4.563384] random: systemd: uninitialized urandom read (16 bytes read) [ 4.564407] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.564481] random: systemd: uninitialized urandom read (16 bytes read) [ 4.565415] systemd[1]: Created slice User and Session Slice. [ 4.565633] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.566381] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.566551] systemd[1]: Reached target User and Group Name Lookups. [ 4.566665] systemd[1]: Reached target Slices. [ 4.566766] systemd[1]: Reached target Swap. [ 4.579134] systemd[1]: Listening on RPCbind Server Activation Socket. [ 4.579482] systemd[1]: Listening on Syslog Socket. [ 4.579766] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.579991] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.580513] systemd[1]: Listening on Journal Audit Socket. [ 4.580802] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.581092] systemd[1]: Listening on Journal Socket. [ 4.581471] systemd[1]: Listening on udev Control Socket. [ 4.581660] systemd[1]: Listening on udev Kernel Socket. [ 4.585349] systemd[1]: Mounting Huge Pages File System... [ 4.589492] systemd[1]: Mounting POSIX Message Queue File System... [ 4.593224] systemd[1]: Mounting RPC Pipe File System... [ 4.597570] systemd[1]: Mounting Kernel Debug File System... [ 4.601438] systemd[1]: Mounting Kernel Trace File System... [ 4.605562] systemd[1]: Starting Journal Service... [ 4.612041] systemd[1]: Starting Set the console keyboard layout... [ 4.615766] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 4.615962] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 4.619676] systemd[1]: Started Nameserver information manager. [ 4.620639] systemd[1]: Reached target Network (Pre). [ 4.632744] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 4.632896] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 4.638253] systemd[1]: Starting Load Kernel Modules... [ 4.641716] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.646137] systemd[1]: Starting udev Coldplug all Devices... [ 4.649493] systemd[1]: Starting Uncomplicated firewall... [ 4.654279] systemd[1]: Mounted Huge Pages File System. [ 4.654825] systemd[1]: Mounted POSIX Message Queue File System. [ 4.655262] systemd[1]: Mounted RPC Pipe File System. [ 4.655649] systemd[1]: Mounted Kernel Debug File System. [ 4.656025] systemd[1]: Mounted Kernel Trace File System. [ 4.658091] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 4.662236] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.665916] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.686461] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.726079] systemd[1]: Starting Platform Persistent Storage Archival... [ 4.730875] systemd[1]: Starting Load/Save Random Seed... [ 4.734632] systemd[1]: Starting Create System Users... [ 4.737846] systemd[1]: Finished Uncomplicated firewall. [ 4.780968] systemd[1]: Finished Set the console keyboard layout. [ 4.820562] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.835153] systemd[1]: Finished Load Kernel Modules. [ 4.836463] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 4.839402] systemd[1]: Mounting Kernel Configuration File System... [ 4.843613] systemd[1]: Starting Apply Kernel Variables... [ 4.871341] systemd[1]: Mounted Kernel Configuration File System. [ 4.876297] systemd[1]: Finished Create System Users. [ 4.879918] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.880386] systemd[1]: Started Journal Service. [ 4.911856] systemd-journald[2357]: Received client request to flush runtime journal. [ 5.102674] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 5.102934] squashfs: SQUASHFS error: unable to read xattr id index table [ 5.116960] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 5.117177] squashfs: SQUASHFS error: unable to read xattr id index table [ 6.531407] cpu-throttle-alert cooling device registered. [ 6.531769] gpu-throttle-alert cooling device registered. [ 6.532112] aux-throttle-alert cooling device registered. [ 7.020822] rtl88x2ce 0004:01:00.0: enabling device (0000 -> 0003) [ 7.240239] uvcvideo: Found UVC 1.00 device See3CAM_CU135 (2560:c1d1) [ 7.246118] uvcvideo 2-3.1:1.0: Entity type for entity Extension 3 was not initialized! [ 7.246141] uvcvideo 2-3.1:1.0: Entity type for entity Processing 2 was not initialized! [ 7.246146] uvcvideo 2-3.1:1.0: Entity type for entity Camera 1 was not initialized! [ 7.247534] input: See3CAM_CU135 as /devices/3610000.xhci/usb2/2-3/2-3.1/2-3.1:1.0/input/input5 [ 7.247868] uvcvideo: Found UVC 1.00 device See3CAM_CU135 (2560:c1d1) [ 7.251347] uvcvideo 2-3.2:1.0: Entity type for entity Extension 3 was not initialized! [ 7.251358] uvcvideo 2-3.2:1.0: Entity type for entity Processing 2 was not initialized! [ 7.251363] uvcvideo 2-3.2:1.0: Entity type for entity Camera 1 was not initialized! [ 7.251732] input: See3CAM_CU135 as /devices/3610000.xhci/usb2/2-3/2-3.2/2-3.2:1.0/input/input6 [ 7.252009] uvcvideo: Found UVC 1.00 device See3CAM_CU135 (2560:c1d1) [ 7.254312] uvcvideo 2-3.3:1.0: Entity type for entity Extension 3 was not initialized! [ 7.254320] uvcvideo 2-3.3:1.0: Entity type for entity Processing 2 was not initialized! [ 7.254324] uvcvideo 2-3.3:1.0: Entity type for entity Camera 1 was not initialized! [ 7.254581] input: See3CAM_CU135 as /devices/3610000.xhci/usb2/2-3/2-3.3/2-3.3:1.0/input/input7 [ 7.258039] uvcvideo: Found UVC 1.00 device See3CAM_CU135 (2560:c1d1) [ 7.260280] uvcvideo 2-3.4:1.0: Entity type for entity Extension 3 was not initialized! [ 7.260291] uvcvideo 2-3.4:1.0: Entity type for entity Processing 2 was not initialized! [ 7.260295] uvcvideo 2-3.4:1.0: Entity type for entity Camera 1 was not initialized! [ 7.261302] input: See3CAM_CU135 as /devices/3610000.xhci/usb2/2-3/2-3.4/2-3.4:1.0/input/input8 [ 7.261658] usbcore: registered new interface driver uvcvideo [ 7.261661] USB Video Class driver (1.1.1) [ 7.304682] usbcore: registered new interface driver btusb [ 7.318617] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 7.318621] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 7.318623] rtk_btcoex: create workqueue [ 7.318960] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 7.319051] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 7.319055] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 7.319056] rtk_btusb: patch_add [ 7.319058] rtk_btusb: auto suspend is disabled [ 7.319062] rtk_btusb: pid = 0x3549 [ 7.319064] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 7.319074] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 7.319590] rtk_btusb: btusb_probe: done [ 7.319597] rtk_btusb: btusb_open start [ 7.319601] rtk_btusb: btusb_open hdev->promisc ==0 [ 7.319603] rtk_btusb: download_patch start [ 7.319608] rtk_btusb: chip type value: 0x73 [ 7.319612] rtk_btusb: HCI reset. [ 7.319658] usbcore: registered new interface driver rtk_btusb [ 7.330387] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 7.330391] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 7.330394] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 7.330396] rtk_btusb: load_firmware start [ 7.330399] rtk_btusb: lmp_version = 0x8822 [ 7.330401] rtk_btusb: config filename rtl8822cu_config [ 7.377882] rtk_btusb: no bdaddr file /opt/bdaddr [ 7.377888] rtk_btusb: 55 ab 23 87 00 00 [ 7.377899] rtk_btusb: Config file length 6, new length 6 [ 7.377901] rtk_btusb: fw name is rtl8822cu_fw [ 7.382947] rtk_btusb: This is not 8723a, use new patch style! [ 7.382952] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 7.384374] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 7.384378] rtk_btusb: load_firmware: New gEVersion 3 [ 7.384380] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 7.384383] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 7.384385] rtk_btusb: fw_version = 0x98a42f7 [ 7.384387] rtk_btusb: number_of_total_patch = 3 [ 7.384389] rtk_btusb: chipID 4 [ 7.384391] rtk_btusb: patch_length 0x55f0 [ 7.384393] rtk_btusb: start_offset 0x00005d00 [ 7.384396] rtk_btusb: Svn version: 21761 [ 7.384399] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 7.384400] rtk_btusb: buf_len = 0x55f6 [ 7.384413] rtk_btusb: fw: exists, config file: exists [ 7.384423] rtk_btusb: load_firmware done [ 7.384441] rtk_btusb: download_data start [ 7.497395] rtk_btusb: download_data done [ 7.497402] rtk_btusb: HCI reset. [ 7.508397] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 7.508404] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 7.508408] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 7.508417] rtk_btusb: Rtk patch end 0 [ 7.508422] rtk_btusb: btusb_open set HCI_RUNNING [ 7.508466] rtk_btcoex: Open BTCOEX [ 7.508469] rtk_btusb: btusb_open end [ 7.511393] rtk_btcoex: BTCOEX hci_rev 0x098a [ 7.511400] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 7.531372] rtk_btusb: btusb_notify: hci0 evt 3 [ 7.563413] rtk_btusb: btusb_flush add delay [ 7.583435] rtk_btusb: btusb_close [ 7.595190] rtk_btcoex: Close BTCOEX [ 7.595199] rtk_btcoex: -x [ 9.394750] usb 2-3.1: usb_suspend_both: status 0 [ 9.394762] usb 2-3.3: usb_suspend_both: status 0 [ 9.402740] usb 2-3.4: usb_suspend_both: status 0 [ 9.402756] usb 2-3.2: usb_suspend_both: status 0 [ 9.458745] usb 2-3: usb_suspend_both: status 0 [ 9.458904] usb usb2: usb_suspend_both: status 0 [ 32.494392] random: crng init done [ 32.494557] random: 7 urandom warning(s) missed due to ratelimiting [ 33.093271] using random self ethernet address [ 33.093461] using random host ethernet address [ 34.134872] vdd-1v8-sd: disabling [ 34.134882] vdd-1v8-cvb: disabling [ 34.134886] vdd-epb-1v0: disabling [ 34.134889] avdd-cam-2v8: disabling [ 34.134893] vdd-fan: disabling [ 34.134896] vdd_sys_en: disabling [ 34.351259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.351278] Bluetooth: BNEP socket layer initialized [ 34.993887] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.312420] gpio tegra-gpio wake20 for gpio=52(G:4) [ 35.320389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.333019] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.617383] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.776681] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.276730] Mass Storage Function, version: 2009/09/11 [ 37.276740] LUN: removable file: (no medium) [ 37.281554] using random self ethernet address [ 37.281752] using random host ethernet address [ 38.108225] rndis0: HOST MAC 8a:7c:72:4c:df:74 [ 38.108453] rndis0: MAC 8a:7c:72:4c:df:75 [ 38.114438] usb0: HOST MAC 8a:7c:72:4c:df:76 [ 38.114481] usb0: MAC 8a:7c:72:4c:df:77 [ 38.114505] tegra-xudc-new 3550000.xudc: exiting ELPG [ 38.115365] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 38.115389] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 38.115424] tegra-xudc-new 3550000.xudc: entering ELPG [ 38.115678] tegra-xudc-new 3550000.xudc: entering ELPG done [ 38.115691] tegra-xudc-new 3550000.xudc: exiting ELPG [ 38.116124] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 38.116136] tegra-xudc-new 3550000.xudc: entering ELPG [ 38.116356] tegra-xudc-new 3550000.xudc: entering ELPG done [ 38.122596] l4tbr0: port 1(rndis0) entered blocking state [ 38.122611] l4tbr0: port 1(rndis0) entered disabled state [ 38.122899] device rndis0 entered promiscuous mode [ 38.128239] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 38.133521] l4tbr0: port 2(usb0) entered blocking state [ 38.133531] l4tbr0: port 2(usb0) entered disabled state [ 38.133959] device usb0 entered promiscuous mode [ 38.140543] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 39.255206] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 39.574317] zram: Added device: zram0 [ 39.575104] zram: Added device: zram1 [ 39.576148] zram: Added device: zram2 [ 39.576712] zram: Added device: zram3 [ 39.581279] zram: Added device: zram4 [ 39.583578] zram: Added device: zram5 [ 39.603417] zram0: detected capacity change from 0 to 678551552 [ 39.894652] ------------[ cut here ]------------ [ 39.894919] WARNING: CPU: 3 PID: 6333 at /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/net/wireless/nl80211.c:14153 cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 39.895269] Modules linked in: zram overlay bnep rtk_btusb btusb btrtl uvcvideo btbcm btintel rtl8822ce userspace_alert cfg80211 nvgpu ip_tables x_tables [ 39.895361] CPU: 3 PID: 6333 Comm: RTW_CMD_THREAD Not tainted 4.9.253-tegra #1 [ 39.895366] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [ 39.895373] task: ffffffc1dbb0b800 task.stack: ffffffc1c79b4000 [ 39.895463] PC is at cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 39.896122] LR is at rtw_cfg80211_ch_switch_notify+0x94/0x98 [rtl8822ce] [ 39.896139] pc : [] lr : [] pstate: 60c00045 [ 39.896145] sp : ffffffc1c79b7c20 [ 39.896151] x29: ffffffc1c79b7c20 x28: ffffff800127e760 [ 39.896165] x27: ffffff800bf471bc x26: ffffff8001443578 [ 39.896177] x25: ffffff80014c713c x24: ffffffc1db9cd000 [ 39.896189] x23: ffffffc1d062d000 x22: ffffffc1d063e800 [ 39.896201] x21: 0000000000000002 x20: ffffffc1c79b7ca8 [ 39.896213] x19: ffffffc1da9c4800 x18: 0000000000000400 [ 39.896228] x17: 0000007f794f0118 x16: 0000000000000000 [ 39.896240] x15: 000000000000022d x14: 0000000000000008 [ 39.896252] x13: 7f1201c70000002a x12: 0105c00363fffa03 [ 39.896264] x11: 0000000000000004 x10: 0000000000000002 [ 39.896277] x9 : 0000000000000004 x8 : ffffffc1c79b7d3a [ 39.896289] x7 : 0000000000000000 x6 : 0000000000000001 [ 39.896300] x5 : 0000000000000040 x4 : 00000000000009b4 [ 39.896312] x3 : 0000145a00000003 x2 : ffffffc1d0678048 [ 39.896325] x1 : 0000145a00000003 x0 : 0000000000000000 [ 39.896342] ---[ end trace 4edb1a8c703fc540 ]--- [ 39.896499] Call trace: [ 39.896594] [] cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 39.897256] [] rtw_cfg80211_ch_switch_notify+0x94/0x98 [rtl8822ce] [ 39.897892] [] rtw_chk_start_clnt_join+0x43c/0x4d8 [rtl8822ce] [ 39.898534] [] join_cmd_hdl+0x238/0x330 [rtl8822ce] [ 39.899160] [] rtw_cmd_thread+0x308/0x608 [rtl8822ce] [ 39.899172] [] kthread+0xec/0xf0 [ 39.899182] [] ret_from_fork+0x10/0x30 [ 40.050560] Adding 662644k swap on /dev/zram0. Priority:5 extents:1 across:662644k SS [ 40.057812] zram1: detected capacity change from 0 to 678551552 [ 40.072451] Adding 662644k swap on /dev/zram1. Priority:5 extents:1 across:662644k SS [ 40.075683] zram2: detected capacity change from 0 to 678551552 [ 40.079416] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.108968] Adding 662644k swap on /dev/zram2. Priority:5 extents:1 across:662644k SS [ 40.112018] zram3: detected capacity change from 0 to 678551552 [ 40.127256] Adding 662644k swap on /dev/zram3. Priority:5 extents:1 across:662644k SS [ 40.130597] zram4: detected capacity change from 0 to 678551552 [ 40.143805] Adding 662644k swap on /dev/zram4. Priority:5 extents:1 across:662644k SS [ 40.147262] zram5: detected capacity change from 0 to 678551552 [ 40.162945] Adding 662644k swap on /dev/zram5. Priority:5 extents:1 across:662644k SS [ 50.989040] fuse init (API version 7.26) [ 51.078025] tegradc 15200000.nvdisplay: unblank [ 51.078040] tegradc 15210000.nvdisplay: blank - powerdown [ 54.378784] usb 2-3.1: usb_suspend_both: status 0 [ 54.378790] usb 2-3.2: usb_suspend_both: status 0 [ 54.378811] usb 2-3.4: usb_suspend_both: status 0 [ 54.378816] usb 2-3.3: usb_suspend_both: status 0 [ 54.434800] usb 2-3: usb_suspend_both: status 0 [ 54.435003] usb usb2: usb_suspend_both: status 0 [ 54.694701] tegradc 15200000.nvdisplay: blank - powerdown [ 54.761323] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 54.761328] Extcon AUX1(HDMI) disable [ 54.783245] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 54.783779] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 54.789139] tegradc 15210000.nvdisplay: blank - powerdown [ 54.800944] tegradc 15200000.nvdisplay: blank - powerdown [ 54.800977] tegradc 15200000.nvdisplay: unblank [ 54.802010] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 54.802169] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 54.808035] Parent Clock set for DC plld2 [ 54.817331] tegradc 15200000.nvdisplay: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_223m_300m [ 54.819215] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 54.854454] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 54.854458] Extcon AUX1(HDMI) enable [ 54.854558] tegradc 15200000.nvdisplay: unblank [ 54.854571] tegradc 15210000.nvdisplay: blank - powerdown [ 83.559531] usb 2-3.1: USB disconnect, device number 3 [ 83.694839] usb 2-3: usb_suspend_both: status 0 [ 83.695382] usb usb2: usb_suspend_both: status 0 [ 90.115078] usb 2-3.1: new SuperSpeed USB device number 7 using tegra-xusb [ 90.136864] usb 2-3.1: New USB device found, idVendor=2109, idProduct=0817 [ 90.136873] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 90.136881] usb 2-3.1: Product: USB3.0 Hub [ 90.136887] usb 2-3.1: Manufacturer: VIA Labs, Inc. [ 90.141054] hub 2-3.1:1.0: USB hub found [ 90.141682] hub 2-3.1:1.0: 4 ports detected [ 90.266762] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 90.288814] usb 1-2.1: New USB device found, idVendor=2109, idProduct=2817 [ 90.288825] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 90.288831] usb 1-2.1: Product: USB2.0 Hub [ 90.288837] usb 1-2.1: Manufacturer: VIA Labs, Inc. [ 90.289862] hub 1-2.1:1.0: USB hub found [ 90.290073] hub 1-2.1:1.0: 4 ports detected [ 90.546759] usb 2-3.1: usb_suspend_both: status 0 [ 90.602765] usb 2-3: usb_suspend_both: status 0 [ 90.602995] usb usb2: usb_suspend_both: status 0 [ 91.006768] usb 1-2.1.1: new full-speed USB device number 5 using tegra-xusb [ 91.029004] usb 1-2.1.1: New USB device found, idVendor=062a, idProduct=4182 [ 91.029016] usb 1-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 91.029023] usb 1-2.1.1: Product: 2.4G Keyboard Mouse [ 91.029028] usb 1-2.1.1: Manufacturer: MOSART Semi. [ 91.031940] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/0003:062A:4182.0005/input/input9 [ 91.091770] hid-generic 0003:062A:4182.0005: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3610000.xhci-2.1.1/input0 [ 91.094463] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.1/0003:062A:4182.0006/input/input10 [ 91.151311] hid-generic 0003:062A:4182.0006: input,hidraw4: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3610000.xhci-2.1.1/input1 [ 91.278828] usb 1-2.1.2: new low-speed USB device number 6 using tegra-xusb [ 91.303954] usb 1-2.1.2: New USB device found, idVendor=1d57, idProduct=0001 [ 91.303964] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 91.303970] usb 1-2.1.2: Product: 2.4G Mouse [ 91.303975] usb 1-2.1.2: Manufacturer: 2.4G KB [ 91.308430] input: 2.4G KB 2.4G Mouse as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:1D57:0001.0007/input/input11 [ 91.367990] hid-generic 0003:1D57:0001.0007: input,hidraw5: USB HID v1.10 Keyboard [2.4G KB 2.4G Mouse] on usb-3610000.xhci-2.1.2/input0 [ 91.372850] input: 2.4G KB 2.4G Mouse as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.1/0003:1D57:0001.0008/input/input12 [ 91.431398] hid-generic 0003:1D57:0001.0008: input,hidraw6: USB HID v1.10 Mouse [2.4G KB 2.4G Mouse] on usb-3610000.xhci-2.1.2/input1