``` vizgard@vizgardnx2:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7. 3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro G CC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b2000 [ 0.000000] Found lut_mem: 00002008@a06af000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramo ops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carv eout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,go smem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_ uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b2000 lut_mem=0x2008 @0xa06af000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ra tchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 r w rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29968(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182412K/8124404K available (15358K kernel code, 2956K rwdata, 6692K r odata, 8640K init, 612K bss, 188328K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000710] Console: colour dummy device 80x25 [ 0.000721] console [tty0] enabled [ 0.000728] bootconsole [tegra_comb_uart0] disabled [ 0.000742] kmemleak: Kernel memory leak detector disabled [ 0.000761] Calibrating delay loop (skipped), value calculated using timer frequency.. 62. 50 BogoMIPS (lpj=125000) [ 0.000776] pid_max: default: 32768 minimum: 301 [ 0.001836] Security Framework initialized [ 0.002400] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002411] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003982] ftrace: allocating 47077 entries in 184 pages [ 0.404072] sched-energy: Sched-energy-costs installed from DT [ 0.404092] ASID allocator initialised with 65536 entries [ 0.439196] tegra-id: chipid=21917. [ 0.439208] tegra-id: opt_subrevision=1. [ 0.439235] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.439262] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/bo ot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3 509-0000.dts [ 0.439273] DTB Build time: Jul 26 2021 12:22:25 [ 0.487301] CPU1: Booted secondary processor [4e0f0040] [ 0.519362] CPU2: Booted secondary processor [4e0f0040] [ 0.551498] CPU3: Booted secondary processor [4e0f0040] [ 0.583770] CPU4: Booted secondary processor [4e0f0040] [ 0.615873] CPU5: Booted secondary processor [4e0f0040] [ 0.616112] Brought up 6 CPUs [ 0.616129] SMP: Total of 6 processors activated. [ 0.616142] CPU features: detected feature: Privileged Access Never [ 0.616151] CPU features: detected feature: LSE atomic instructions [ 0.616160] CPU features: detected feature: User Access Override [ 0.616169] CPU features: detected feature: 32-bit EL0 Support [ 0.617644] CPU: All CPU(s) started at EL2 [ 0.617716] alternatives: patching kernel code [ 0.624021] devtmpfs: initialized [ 0.661696] Initilizing CustomIPI irq domain [ 0.661871] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76 45041785100000 ns [ 0.661887] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.685280] pinctrl core: initialized pinctrl subsystem [ 0.685508] OS set in device tree is not L4T. [ 0.685792] regulator-dummy: no parameters [ 0.686078] Initializing plugin-manager [ 0.686126] Plugin module not found [ 0.686172] Plugin-manager status disabled [ 0.687423] NET: Registered protocol family 16 [ 0.690177] pstore: using zlib compression [ 0.690201] console [pstore-1] enabled [ 0.690210] pstore: Registered ramoops as persistent store backend [ 0.690221] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.707105] cpuidle: using governor menu [ 0.708154] bpmp: waiting for handshake [ 0.708166] bpmp: handshake completed [ 0.708183] bpmp: synchronizing channels [ 0.708195] bpmp: channels synchronized [ 0.708204] bpmp: mail init ok [ 0.710538] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.710708] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.710715] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.710723] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.710728] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.710734] t19x-arm-smmu 12000000.iommu: nested translation [ 0.710743] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mas k 0x7f80 [ 0.710751] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.710758] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.710765] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.710771] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.715030] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.715065] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.717626] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.718494] tegra_aon_clk_init: ok [ 0.718507] Registering BPMP clocks... [ 0.718646] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.719213] Serial: AMBA PL011 UART driver [ 0.719330] tegra_powergate_init: DONE [ 0.720428] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/bo ot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3 509-0000.dts [ 0.720439] DTB Build time: Jul 26 2021 12:22:25 [ 0.722913] Tegra reboot handler registered. [ 0.729701] iommu: Adding device 14160000.pcie to group 0 [ 0.730262] iommu: Adding device 141a0000.pcie to group 1 [ 0.731537] iommu: Adding device 2490000.ether_qos to group 2 [ 0.731964] iommu: Adding device 3100000.serial to group 3 [ 0.732358] iommu: Adding device 3110000.serial to group 4 [ 0.732666] iommu: Adding device 3140000.serial to group 5 [ 0.733315] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.733471] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.733495] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.733500] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.733505] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.733548] tegra-pmc: PMC Prod config success [ 0.733702] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.733715] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.733977] iommu: Adding device 3460000.sdhci to group 6 [ 0.734428] iommu: Adding device 3210000.spi to group 7 [ 0.734749] iommu: Adding device 3230000.spi to group 8 [ 0.735128] iommu: Adding device 3270000.spi to group 9 [ 0.736139] iommu: Adding device 3160000.i2c to group 10 [ 0.736553] iommu: Adding device c240000.i2c to group 11 [ 0.736939] iommu: Adding device 3180000.i2c to group 12 [ 0.737298] iommu: Adding device 3190000.i2c to group 13 [ 0.737781] iommu: Adding device 31b0000.i2c to group 14 [ 0.738131] iommu: Adding device 31c0000.i2c to group 15 [ 0.738521] iommu: Adding device c250000.i2c to group 16 [ 0.738884] iommu: Adding device 31e0000.i2c to group 17 [ 0.739398] iommu: Adding device sound to group 18 [ 0.739895] iommu: Adding device 3510000.hda to group 19 [ 0.740385] iommu: Adding device bc00000.rtcpu to group 20 [ 0.742330] iommu: Adding device 13e10000.host1x to group 21 [ 0.742703] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.743018] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.743354] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.743687] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.744055] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.744363] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.744688] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.745023] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.745489] iommu: Adding device 15340000.vic to group 30 [ 0.745898] iommu: Adding device 15380000.nvjpg to group 31 [ 0.746249] iommu: Adding device 15500000.tsec to group 32 [ 0.746489] iommu: Adding device 15100000.tsecb to group 33 [ 0.746732] iommu: Adding device 15480000.nvdec to group 34 [ 0.747009] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.747255] iommu: Adding device 154c0000.nvenc to group 36 [ 0.747519] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.747943] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.748307] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.748913] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.749090] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b2000(800000) [ 0.749101] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06af000(3000) [ 0.753007] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.753059] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.753814] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.753855] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.755513] iommu: Adding device 15c10000.vi to group 42 [ 0.755701] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.756014] iommu: Adding device 14800000.isp to group 43 [ 0.756857] iommu: Adding device 16000000.pva0 to group 44 [ 0.757305] iommu: Adding device 16800000.pva1 to group 45 [ 0.757628] iommu: Adding device 15810000.se to group 46 [ 0.758028] iommu: Adding device 15820000.se to group 47 [ 0.758260] iommu: Adding device 15830000.se to group 48 [ 0.758479] iommu: Adding device 15840000.se to group 49 [ 0.758729] iommu: Adding device c1a0000.aon to group 50 [ 0.760026] iommu: Adding device d000000.bpmp to group 51 [ 0.760377] bpmp: ping status is 0 [ 0.760496] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.763567] bpmp d000000.bpmp: probe ok [ 0.765213] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.765594] iommu: Adding device smmu_test to group 52 [ 0.766660] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.766683] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.766703] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.766732] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.766752] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.766771] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.766792] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.766814] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.766835] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.766856] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.766877] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.766898] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.766921] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.766943] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.766964] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.767005] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.767022] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.767094] mc-err: mcerr ops are set to t19x [ 0.772237] iommu: Adding device 2600000.dma to group 53 [ 0.776834] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lin es on the chip [ 0.778021] GPIO line 339 (wifi-enable) hogged as output/high [ 0.778065] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.778101] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.778373] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gp io) [ 0.783362] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.783434] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.783472] GPIO line 266 (w-disable1) hogged as output/high [ 0.783506] GPIO line 264 (w-disable2) hogged as output/high [ 0.783539] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.783782] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gp io-aon) [ 0.785666] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.785678] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.785687] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.786406] iommu: Adding device 3550000.xudc to group 54 [ 0.787099] iommu: Adding device 3610000.xhci to group 55 [ 0.789189] arm64_ras arm64_ras: probed [ 0.789479] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.789533] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.789614] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.789679] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.789739] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.789792] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.789971] carmel_ras_enable: RAS enabled on cpu0 [ 0.790141] carmel_ras_enable: RAS enabled on cpu1 [ 0.790339] carmel_ras_enable: RAS enabled on cpu2 [ 0.790533] carmel_ras_enable: RAS enabled on cpu3 [ 0.790732] carmel_ras_enable: RAS enabled on cpu4 [ 0.790928] carmel_ras_enable: RAS enabled on cpu5 [ 0.791056] carmel_ras carmel_ras: probed [ 0.792389] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.792839] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.793586] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.794340] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.795006] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.795355] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.796393] vdd-ac-bat: 5000 mV [ 0.796774] vdd-sdmmc1-sw: 3300 mV [ 0.797008] vdd-1v8-sd: 1800 mV [ 0.797236] vdd-3v3-cvb: 3300 mV [ 0.797477] vdd-1v8-cvb: 1800 mV [ 0.797778] vdd-epb-1v0: 1000 mV [ 0.797920] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.798203] avdd-cam-2v8: 2800 mV [ 0.798454] vdd-fan: 5000 mV [ 0.798682] vdd-hdmi-5v0: 5000 mV [ 0.798917] vdd_sys_en: 1200 mV [ 0.829343] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.833909] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.834202] SCSI subsystem initialized [ 0.834464] libata version 3.00 loaded. [ 0.834622] usbcore: registered new interface driver usbfs [ 0.834656] usbcore: registered new interface driver hub [ 0.834689] usbcore: registered new device driver usb [ 0.845493] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/ pinmux@0, deferring probe [ 0.848319] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.852909] vdd-1v0: at 1000 mV [ 0.856994] vdd-1v8-hs: at 1800 mV [ 0.860981] vdd-1v8-ls: at 1800 mV [ 0.865010] vdd-1v8-ao: at 1800 mV [ 0.869074] vddio-ddr-1v1: at 1100 mV [ 0.872827] vdd-rtc: at 800 mV [ 0.873852] spmic-ldo1: at 2375 mV [ 0.880889] vdd-ao-3v3: at 3300 mV [ 0.888908] vddio-emmc-3v3: at 3300 mV [ 0.890153] spmic-ldo4: at 1587 mV [ 0.896949] vdd-usb-3v3: at 3300 mV [ 0.904970] vddio-sdmmc1-3v3: at 3300 mV [ 0.908995] vdd-csi-1v2: at 1200 mV [ 0.910262] spmic-ldo8: at 1800 mV [ 0.914452] GPIO line 246 (gpio_default) hogged as output/high [ 0.915407] GPIO line 247 (gpio_default) hogged as output/high [ 0.915692] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620 -gpio) [ 0.915980] max77620 4-003c: max77620 probe successful [ 0.916650] media: Linux media interface: v0.10 [ 0.916735] Linux video capture interface: v2.00 [ 0.918411] pps_core: LinuxPPS API ver. 1 registered [ 0.918418] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.918441] PTP clock support registered [ 0.918736] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.919003] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.919034] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.921441] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.921512] trusty trusty: selected api version: 3 (requested 3) [ 0.922537] Advanced Linux Sound Architecture Driver Initialized. [ 0.922882] Bluetooth: Core ver 2.22 [ 0.922920] NET: Registered protocol family 31 [ 0.922925] Bluetooth: HCI device and connection manager initialized [ 0.922936] Bluetooth: HCI socket layer initialized [ 0.922944] Bluetooth: L2CAP socket layer initialized [ 0.922966] Bluetooth: SCO socket layer initialized [ 0.925760] camchar: rtcpu character device driver loaded [ 0.926193] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.926271] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.927087] clocksource: Switched to clocksource arch_sys_counter [ 0.965969] VFS: Disk quotas dquot_6.6.0 [ 0.966054] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.966376] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.967745] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semapho res [ 0.967798] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x0000 0000c6000000, size=0x2a000000 [ 0.968060] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.968068] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create s uccessful [ 0.968081] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.968090] nvmap_page_pool_init: Total RAM pages: 1984019 [ 0.968097] nvmap_page_pool_init: nvmap page pool size: 248002 pages (968 MB) [ 0.968262] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.968699] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.970778] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 0.981910] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-the rm [ 0.982075] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-the rm [ 0.982233] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-the rm [ 0.982383] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-ther m [ 0.982541] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Di e [ 0.983716] la/ptsa driver initialized. [ 0.984004] NET: Registered protocol family 2 [ 0.984821] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.985145] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.985742] TCP: Hash tables configured (established 65536 bind 65536) [ 0.985793] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.985914] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.986351] NET: Registered protocol family 1 [ 0.986880] RPC: Registered named UNIX socket transport module. [ 0.986887] RPC: Registered udp transport module. [ 0.986892] RPC: Registered tcp transport module. [ 0.986897] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.986914] PCI: CLS 0 bytes, default 64 [ 0.987153] Trying to unpack rootfs image as initramfs... [ 1.211397] Freeing initrd memory: 7068K [ 1.226679] host1x 13e10000.host1x: initialized [ 1.228428] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.232841] audit: initializing netlink subsys (disabled) [ 1.232895] audit: type=2000 audit(0.852:1): initialized [ 1.233464] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.239370] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.240359] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.240873] 9p: Installing v9fs 9p2000 file system support [ 1.245447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.245611] io scheduler noop registered [ 1.245799] io scheduler cfq registered (default) [ 1.249657] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.250785] random: fast init done [ 1.283464] iommu: Adding device 2993000.adsp to group 56 [ 1.390423] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.391448] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.403374] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.403861] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.404511] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.404884] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.405304] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.408693] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platfor m_driver probe [ 1.408879] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_is o_bw=1500000, max_bw=1500000 [ 1.411712] tsec 15500000.tsec: initialized [ 1.413325] tsec 15100000.tsecb: initialized [ 1.416978] nvdec 15480000.nvdec: initialized [ 1.419831] nvdec 15140000.nvdec1: initialized [ 1.425798] falcon 15340000.vic: initialized [ 1.427964] falcon 15380000.nvjpg: initialized [ 1.429896] falcon 154c0000.nvenc: initialized [ 1.431877] falcon 15a80000.nvenc1: initialized [ 1.435185] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.436878] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.438206] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.439584] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.440978] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.442327] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.443758] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.445065] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.448672] t194-nvcsi 15a00000.nvcsi: initialized [ 1.454456] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.454896] scare-pigeon 14b00000.isp-thi: initialized [ 1.460532] pva 16000000.pva0: initialized [ 1.466105] pva 16800000.pva1: initialized [ 1.470804] nvdla 15880000.nvdla0: initialized [ 1.475810] nvdla 158c0000.nvdla1: initialized [ 1.477345] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.477358] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.477397] tegradccommon 15200000.dc_common: dma mapping done [ 1.477568] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.477577] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.477911] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.477937] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.478204] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.478214] tegra_cec 3960000.tegra_cec: probed [ 1.479108] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.479180] generic_infoframe_type: 0x87 [ 1.479314] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.479366] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.484286] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.484299] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 H z [ 1.484311] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.484559] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.484571] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.485490] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 192 0x1080 (on 0x0mm) pclk=148350937 [ 1.487895] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.487905] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.489750] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.490404] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.490413] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.490763] kfuse 3830000.kfuse: initialized [ 1.491426] tegradc 15200000.nvdisplay: probed [ 1.496930] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.499498] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA _UART [ 1.500735] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA _UART [ 1.501511] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA _UART [ 1.502759] console [ttyTCU0] enabled [ 1.503067] [drm] Initialized [ 1.513399] brd: module loaded [ 1.518366] loop: module loaded [ 1.518441] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.518576] tegra_profiler: auth: init [ 1.519391] THERMAL EST: found 3 subdevs [ 1.519421] THERMAL EST num_resources: 0 [ 1.519439] [THERMAL EST subdev 0] [ 1.519447] [THERMAL EST subdev 1] [ 1.519454] [THERMAL EST subdev 2] [ 1.519497] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.519790] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal -fan-est [ 1.519797] THERMAL EST: thz register success. [ 1.520036] THERMAL EST: end of probe, return err: 0 [ 1.520699] sd: No Scsi addr parsed to reserve index [ 1.520732] hisi_sas: driver version v1.6 [ 1.530580] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.530590] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.530601] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x 00010000 (64KiB) .numeraseregions = 0 [ 1.530867] 1 ofpart partitions found on MTD device spi6.0 [ 1.530874] Creating 1 MTD partitions on "spi6.0": [ 1.530884] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.533160] libphy: Fixed MDIO Bus: probed [ 1.533673] tun: Universal TUN/TAP device driver, 1.6 [ 1.533679] tun: (C) 1999-2004 Max Krasnyansky [ 1.534306] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.534312] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.534343] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.534347] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.534380] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.534385] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.534415] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.534420] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.537091] Console: switching to colour frame buffer device 240x67 [ 1.537215] tegradc 15200000.nvdisplay: fb registered [ 1.537536] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.538155] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.538259] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.543203] Parent Clock set for DC plld2 [ 1.595412] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_1 11m_223m [ 1.596113] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.596127] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.621746] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.621754] Extcon AUX1(HDMI) enable [ 1.622247] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.622280] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.622373] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.622461] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 1.622709] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.622719] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.631072] tegradc 15210000.nvdisplay: probed [ 1.631426] tegradc 15210000.nvdisplay: fb registered [ 1.634757] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.634767] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.634779] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.634796] tegradc 15210000.nvdisplay: blank - powerdown [ 1.634811] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set . [ 1.634816] Extcon DP: HPD disabled [ 1.634822] hpd: hpd_switch 0 [ 1.634828] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.634839] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.634848] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.754135] tegradc 15200000.nvdisplay: blank - powerdown [ 1.778020] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.778567] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5 a1 83 [ 1.778581] Using phyrst_lpmode = 1 from DT [ 1.778656] libphy: dwc_phy: probed [ 1.780989] PPP generic driver version 2.4.2 [ 1.781372] PPP BSD Compression module registered [ 1.781377] PPP Deflate Compression module registered [ 1.781395] PPP MPPE Compression module registered [ 1.781399] NET: Registered protocol family 24 [ 1.781490] usbcore: registered new interface driver r8152 [ 1.781524] usbcore: registered new interface driver asix [ 1.781557] usbcore: registered new interface driver ax88179_178a [ 1.781580] usbcore: registered new interface driver cdc_ether [ 1.781619] usbcore: registered new interface driver net1080 [ 1.781646] usbcore: registered new interface driver cdc_subset [ 1.781673] usbcore: registered new interface driver zaurus [ 1.781704] usbcore: registered new interface driver cdc_ncm [ 1.781921] VFIO - User Level meta-driver version: 0.3 [ 1.783140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.783156] ehci-pci: EHCI PCI platform driver [ 1.783184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.783192] ohci-pci: OHCI PCI platform driver [ 1.783219] ohci-platform: OHCI generic platform driver [ 1.787862] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.789851] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4c8c800 id [ 1.790243] usbcore: registered new interface driver uas [ 1.790290] usbcore: registered new interface driver usb-storage [ 1.790353] usbcore: registered new interface driver usbserial [ 1.792412] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.792447] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.792489] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.793217] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0005 0810 [ 1.793264] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.793463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.793469] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.793474] usb usb1: Product: xHCI Host Controller [ 1.793480] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.793484] usb usb1: SerialNumber: 3610000.xhci [ 1.793865] hub 1-0:1.0: USB hub found [ 1.793943] hub 1-0:1.0: 4 ports detected [ 1.794523] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.794534] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.794542] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.794749] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.794755] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.794760] usb usb2: Product: xHCI Host Controller [ 1.794764] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.794769] usb usb2: SerialNumber: 3610000.xhci [ 1.795142] hub 2-0:1.0: USB hub found [ 1.795196] hub 2-0:1.0: 4 ports detected [ 1.795819] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.795823] Extcon AUX1(HDMI) disable [ 1.795991] Wake76 for irq=199 [ 1.795994] Wake77 for irq=199 [ 1.795997] Wake78 for irq=199 [ 1.795999] Wake79 for irq=199 [ 1.796002] Wake80 for irq=199 [ 1.796006] Wake81 for irq=199 [ 1.796009] Wake82 for irq=199 [ 1.796056] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.796063] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.796172] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.796246] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.813440] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.813449] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.813472] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.813697] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.814047] mousedev: PS/2 mouse device common for all mice [ 1.814163] usbcore: registered new interface driver xpad [ 1.821932] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.823049] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.869123] tegradc 15200000.nvdisplay: unblank [ 1.871382] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.871673] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.882589] Parent Clock set for DC plld2 [ 1.887377] tegradc 15200000.nvdisplay: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_2 23m_300m [ 1.888756] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.899432] usb usb2: usb_suspend_both: status 0 [ 1.923656] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.923661] Extcon AUX1(HDMI) enable [ 1.938955] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 1.947423] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.949126] Wake73 for irq=42 [ 1.950410] rtc rtc1: alarm rtc device [ 1.950429] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.950455] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.950621] i2c /dev entries driver [ 1.952805] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.953069] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.953076] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.953522] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.970710] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.970717] Extcon HDMI: HPD enabled [ 1.970743] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.977092] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.977146] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.977504] imx219 9-0010: board setup failed [ 1.977703] imx219: probe of 9-0010 failed with error -121 [ 1.978039] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.001272] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.001321] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.001627] imx219 10-0010: board setup failed [ 2.001814] imx219: probe of 10-0010 failed with error -121 [ 2.003022] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.010289] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.010694] FAN dev name: pwm-fan [ 2.010738] FAN:gpio request success. [ 2.010748] FAN: can't find tach_gpio [ 2.010761] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.010788] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.010973] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.010981] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.011577] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.011588] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.011596] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.011603] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.011611] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.011618] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.011625] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.011632] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.011640] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.011647] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.012422] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.013860] device-mapper: uevent: version 1.0.3 [ 2.014261] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.c om [ 2.017894] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.018981] cpuidle: Initializing cpuidle driver [ 2.019940] sdhci: Secure Digital Host Controller Interface driver [ 2.019945] sdhci: Copyright(c) Pierre Ossman [ 2.019948] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.021033] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.022936] CMDQ: cmdq_platfm_init successful [ 2.027830] tegra-se-nvhost 15810000.se: initialized [ 2.028920] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.029512] tegra-se-nvhost 15820000.se: initialized [ 2.030611] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.031712] tegra-se-nvhost 15830000.se: initialized [ 2.032413] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.032966] tegra-se-nvhost 15840000.se: initialized [ 2.033850] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.034975] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.035171] hidraw: raw HID events driver (C) Jiri Kosina [ 2.036925] usbcore: registered new interface driver usbhid [ 2.036929] usbhid: USB HID core driver [ 2.040731] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.041764] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.042344] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.043302] denver_knobs_init:MTS_VERSION:53250041 [ 2.043635] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.044261] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.044633] t19x_cache tegra-cache: probed [ 2.046742] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.046751] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.047344] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.047752] PLL_AON clock registered [ 2.048926] Clocks initialized successfully [ 2.050250] nvpmodel: initialized successfully [ 2.051439] trusty-virtio trusty:virtio: initializing [ 2.051632] trusty_ipc virtio0: vring0: va(pa) ffffffc1e262c000(0) qsz 32 notifyid 1 [ 2.051643] trusty_ipc virtio0: vring1: va(pa) ffffffc1e262e000(0) qsz 32 notifyid 2 [ 2.051809] trusty-virtio trusty:virtio: initializing done [ 2.051922] trusty_ipc virtio0: is online [ 2.052410] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.052844] usbcore: registered new interface driver snd-usb-audio [ 2.063111] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.074771] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.074950] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.075179] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.075351] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.105638] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.119039] mmc0: periodic cache flush enabled [ 2.119059] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.119136] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.119580] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.119804] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.119995] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.120190] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.125095] OPE platform probe [ 2.125200] OPE platform probe successful [ 2.125429] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.157523] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 2.157531] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.157535] usb 1-2: Product: USB2.1 Hub [ 2.157540] usb 1-2: Manufacturer: GenesysLogic [ 2.159059] hub 1-2:1.0: USB hub found [ 2.161335] hub 1-2:1.0: 4 ports detected [ 2.195416] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.195547] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.195655] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.195752] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.195853] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.195958] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.196068] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.196175] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.196285] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.196389] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.196487] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.196572] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.196652] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.196733] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.196811] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.196891] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.196988] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.197091] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.197189] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.197292] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.223502] u32 classifier [ 2.223507] Actions configured [ 2.223573] Initializing XFRM netlink socket [ 2.224084] NET: Registered protocol family 10 [ 2.224880] NET: Registered protocol family 17 [ 2.224894] NET: Registered protocol family 15 [ 2.224952] bridge: filtering via arp/ip/ip6tables is no longer available by default. Upda te your scripts to load br_netfilter if you need this. [ 2.225038] Bluetooth: RFCOMM socket layer initialized [ 2.225055] Bluetooth: RFCOMM ver 1.11 [ 2.225075] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.225082] Bluetooth: HIDP socket layer initialized [ 2.225100] 9pnet: Installing 9P2000 support [ 2.225146] Key type dns_resolver registered [ 2.225403] Registered cp15_barrier emulation handler [ 2.225430] Registered setend emulation handler [ 2.227202] registered taskstats version 1 [ 2.227456] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.228514] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.228533] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.228542] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.228548] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.263852] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.298807] usb 2-3: New USB device found, idVendor=05e3, idProduct=0626 [ 2.298815] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.298820] usb 2-3: Product: USB3.1 Hub [ 2.298825] usb 2-3: Manufacturer: GenesysLogic [ 2.305989] hub 2-3:1.0: USB hub found [ 2.307622] hub 2-3:1.0: 4 ports detected [ 2.475123] usb 2-3: usb_suspend_both: status 0 [ 2.487174] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.743030] tegra-pcie-dw 14160000.pcie: link is down [ 2.743236] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.743262] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.743272] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x361000 00-0x361fffff]) [ 2.743278] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus addres s [0x40000000-0xffffffff]) [ 2.743283] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.743312] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.743488] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.743715] iommu: Adding device 0004:00:00.0 to group 58 [ 2.744011] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.744036] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 5 12 [ 2.744244] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.744252] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.744328] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.744488] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.744575] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.744690] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.744845] iommu: Removing device 0004:00:00.0 from group 58 [ 2.744878] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.746547] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.747181] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.747376] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.747403] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.855541] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.855565] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.855575] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.855581] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.963114] tegra-pcie-dw 141a0000.pcie: link is up [ 2.963347] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.963355] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.963364] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a1 00000-0x3a1fffff]) [ 2.963370] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus addres s [0x40000000-0xffffffff]) [ 2.963375] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.963400] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.963532] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.963742] iommu: Adding device 0005:00:00.0 to group 58 [ 2.964153] pci 0005:01:00.0: [1cd7:0053] type 00 class 0x040000 [ 2.964246] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff] [ 2.964862] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot [ 2.965053] iommu: Adding device 0005:01:00.0 to group 59 [ 2.976372] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 2.976380] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f4003ffff] [ 2.976404] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.976411] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 2.976429] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 5 12 [ 2.976476] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 5 12 [ 2.976711] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.976716] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 2.976723] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.976847] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.986703] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 2.991194] tegra194-isp5 14800000.isp: initialized [ 2.997498] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.000670] tegra194-vi5 15c10000.vi: initialized [ 3.004635] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.004772] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.005071] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 step s:24 [ 3.009297] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 step s:10 [ 3.009352] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-a dj:200 [ 3.009358] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-a dj:400 [ 3.009428] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.009495] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-ad j:400 [ 3.009500] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-ad j:400 [ 3.013370] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.013413] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-ad j:200 [ 3.013420] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.013770] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.013823] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:3840 0000 slope-adj:10 [ 3.013829] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:2550 0000 slope-adj:10 [ 3.014295] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff :0 [ 3.014336] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-ad j:400 [ 3.014341] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-ad j:400 [ 3.014543] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.015465] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.091977] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.092314] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.092476] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX [1x384]=0x1b00-0x1d00 [ 3.092595] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 T X[1x8192]=0x3d80-0x5e00 [ 3.093003] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0 x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.093062] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0 xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.093343] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 3.093347] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.094229] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710 c3c9a48de2881774602bbcf4d0114a58 [ 3.094642] Wake83 for irq=211 [ 3.094704] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.094795] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.094940] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.128156] tegra_rtc c2a0000.rtc: setting system clock to 2022-08-30 19:20:04 UTC (166188 7204) [ 3.128669] mmcblk mmc0:0001: Card claimed for testing. [ 3.165946] bpmp: mounted debugfs mirror [ 3.171980] ALSA device list: [ 3.171995] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.172002] #1: jetson-xaviernx-ape [ 3.173778] Freeing unused kernel memory: 8640K [ 3.179658] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 3.203858] usb 2-3.1: New USB device found, idVendor=05e3, idProduct=0749 [ 3.203866] usb 2-3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 3.203872] usb 2-3.1: Product: USB3.0 Card Reader [ 3.203876] usb 2-3.1: Manufacturer: Generic [ 3.203880] usb 2-3.1: SerialNumber: 000000001537 [ 3.212151] Root device found: mmcblk0p1 [ 3.213938] Found dev node: /dev/mmcblk0p1 [ 3.230973] usb-storage 2-3.1:1.0: USB Mass Storage device detected [ 3.231346] scsi host0: usb-storage 2-3.1:1.0 [ 3.243991] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.246592] Rootfs mounted over mmcblk0p1 [ 3.270743] Switching from initrd to actual rootfs [ 3.303150] usb 1-2.2: new full-speed USB device number 4 using tegra-xusb [ 3.327370] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b [ 3.327378] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.327383] usb 1-2.2: Product: USB Receiver [ 3.327387] usb 1-2.2: Manufacturer: Logitech [ 3.443190] usb 1-2.3: new full-speed USB device number 5 using tegra-xusb [ 3.449893] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.453399] cgroup: cgroup2: unknown option "nsdelegate" [ 3.468925] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +AP PARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +E LFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.469605] systemd[1]: Detected architecture arm64. [ 3.469732] usb 1-2.3: New USB device found, idVendor=0403, idProduct=6001 [ 3.469739] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.469744] usb 1-2.3: Product: USB-RS485 Cable [ 3.469748] usb 1-2.3: Manufacturer: FTDI [ 3.469752] usb 1-2.3: SerialNumber: FT4V2E6B [ 3.479740] systemd[1]: Set hostname to . [ 3.566400] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based fire walling. [ 3.566414] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only sh own for the first loaded unit using IP firewalling.) [ 3.715375] random: systemd: uninitialized urandom read (16 bytes read) [ 3.717979] systemd[1]: Created slice User and Session Slice. [ 3.718161] random: systemd: uninitialized urandom read (16 bytes read) [ 3.719202] systemd[1]: Created slice System Slice. [ 3.719284] random: systemd: uninitialized urandom read (16 bytes read) [ 3.719572] systemd[1]: Listening on Journal Socket. [ 3.722278] systemd[1]: Mounting Huge Pages File System... [ 3.725939] systemd[1]: Mounting POSIX Message Queue File System... [ 3.748526] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.835356] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_un it_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.110269] systemd-journald[2378]: Received request to flush runtime journal from PID 1 [ 4.252566] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 1537 PQ: 0 ANSI: 6 [ 4.255446] scsi 0:0:0:1: Direct-Access Generic MassStorageClass 1537 PQ: 0 ANSI: 6 [ 4.404031] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.548108] sd 0:0:0:1: [sdb] 249737216 512-byte logical blocks: (128 GB/119 GiB) [ 4.549357] sd 0:0:0:1: [sdb] Write Protect is off [ 4.549503] sd 0:0:0:1: [sdb] Mode Sense: 21 00 00 00 [ 4.550202] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.563857] sdb: sdb1 [ 4.568739] sd 0:0:0:1: [sdb] Attached SCSI removable disk [ 4.695131] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.695372] tegra_cec 3960000.tegra_cec: Sent res: -62. [ 4.695533] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.877325] using random self ethernet address [ 4.877493] using random host ethernet address [ 5.018677] random: crng init done [ 5.018815] random: 7 urandom warning(s) missed due to ratelimiting [ 5.020210] MWEcoCapture: loading out-of-tree module taints kernel. [ 5.027058] Eco Capture 0005:01:00.0: enabling device (0000 -> 0002) [ 5.111606] cpu-throttle-alert cooling device registered. [ 5.119634] gpu-throttle-alert cooling device registered. [ 5.161698] aux-throttle-alert cooling device registered. [ 5.651863] Mass Storage Function, version: 2009/09/11 [ 5.651873] LUN: removable file: (no medium) [ 5.657072] using random self ethernet address [ 5.657241] using random host ethernet address [ 5.697622] rndis0: HOST MAC 36:7d:98:a4:80:30 [ 5.698135] rndis0: MAC 36:7d:98:a4:80:31 [ 5.699247] usb0: HOST MAC 36:7d:98:a4:80:32 [ 5.700377] usb0: MAC 36:7d:98:a4:80:33 [ 5.700404] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.707373] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.707400] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.707433] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.707691] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.707707] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.708153] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.708165] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.708337] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.717118] l4tbr0: port 1(rndis0) entered blocking state [ 5.717126] l4tbr0: port 1(rndis0) entered disabled state [ 5.717764] device rndis0 entered promiscuous mode [ 5.729435] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.731061] Eco Capture: V4L2 device registered as video0 [ 5.734748] Eco Capture: V4L2 device registered as video1 [ 5.736872] l4tbr0: port 2(usb0) entered blocking state [ 5.736879] l4tbr0: port 2(usb0) entered disabled state [ 5.737456] device usb0 entered promiscuous mode [ 5.783262] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.905724] usbcore: registered new interface driver ftdi_sio [ 5.905796] usbserial: USB Serial support registered for FTDI USB Serial Device [ 5.905994] ftdi_sio 1-2.3:1.0: FTDI USB Serial Device converter detected [ 5.906112] usb 1-2.3: Detected FT232RL [ 5.906638] usb 1-2.3: FTDI USB Serial Device converter now attached to ttyUSB0 [ 6.014036] logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logite ch USB Receiver] on usb-3610000.xhci-2.2/input2 [ 6.065011] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.118722] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.329955] zram: Added device: zram0 [ 6.332234] zram: Added device: zram1 [ 6.333916] zram: Added device: zram2 [ 6.334655] zram: Added device: zram3 [ 6.335583] zram: Added device: zram4 [ 6.337033] zram: Added device: zram5 [ 6.387440] zram0: detected capacity change from 0 to 678551552 [ 6.429822] Adding 662644k swap on /dev/zram0. Priority:5 extents:1 across:662644k SS [ 6.432237] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.434018] zram1: detected capacity change from 0 to 678551552 [ 6.451755] Adding 662644k swap on /dev/zram1. Priority:5 extents:1 across:662644k SS [ 6.452209] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.456224] zram2: detected capacity change from 0 to 678551552 [ 6.475311] Adding 662644k swap on /dev/zram2. Priority:5 extents:1 across:662644k SS [ 6.483442] zram3: detected capacity change from 0 to 678551552 [ 6.526079] Adding 662644k swap on /dev/zram3. Priority:5 extents:1 across:662644k SS [ 6.536291] zram4: detected capacity change from 0 to 678551552 [ 6.576664] Adding 662644k swap on /dev/zram4. Priority:5 extents:1 across:662644k SS [ 6.591570] zram5: detected capacity change from 0 to 678551552 [ 6.630879] Adding 662644k swap on /dev/zram5. Priority:5 extents:1 across:662644k SS [ 7.420511] Bridge firewalling registered [ 7.459848] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.611618] input: Logitech K400 Plus as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.2/00 03:046D:C52B.0003/0003:046D:404D.0004/input/input5 [ 7.624351] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboa rd [Logitech K400 Plus] on usb-3610000.xhci-2.2:1 [ 7.863723] Netfilter messages via NETLINK v0.30. [ 7.870959] ctnetlink v0.93: registering with nfnetlink. [ 7.955609] tegradc 15200000.nvdisplay: unblank [ 7.955624] tegradc 15210000.nvdisplay: blank - powerdown [ 8.118089] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.401726] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 9.402865] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.165521] fuse init (API version 7.26) [ 13.567181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.567205] Bluetooth: BNEP socket layer initialized [ 14.697053] tegradc 15200000.nvdisplay: unblank [ 14.697069] tegradc 15210000.nvdisplay: blank - powerdown [ 17.173687] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 34.135225] vdd-sdmmc1-sw: disabling [ 34.135233] vdd-1v8-sd: disabling [ 34.135238] vdd-1v8-cvb: disabling [ 34.135242] vdd-epb-1v0: disabling [ 34.135246] avdd-cam-2v8: disabling [ 34.135251] vdd-fan: disabling [ 34.135255] vdd_sys_en: disabling [ 60.673304] nvgpu: 17000000.gv11b railgate_enable_store:297 [INFO] railgate is disabled. vizgard@vizgardnx2:~$ vizgard@vizgardnx2:~$ clear vizgard@vizgardnx2:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b2000 [ 0.000000] Found lut_mem: 00002008@a06af000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b2000 lut_mem=0x2008@0xa06af000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29968(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182412K/8124404K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 188328K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000710] Console: colour dummy device 80x25 [ 0.000721] console [tty0] enabled [ 0.000728] bootconsole [tegra_comb_uart0] disabled [ 0.000742] kmemleak: Kernel memory leak detector disabled [ 0.000761] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000776] pid_max: default: 32768 minimum: 301 [ 0.001836] Security Framework initialized [ 0.002400] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002411] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003982] ftrace: allocating 47077 entries in 184 pages [ 0.404072] sched-energy: Sched-energy-costs installed from DT [ 0.404092] ASID allocator initialised with 65536 entries [ 0.439196] tegra-id: chipid=21917. [ 0.439208] tegra-id: opt_subrevision=1. [ 0.439235] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.439262] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.439273] DTB Build time: Jul 26 2021 12:22:25 [ 0.487301] CPU1: Booted secondary processor [4e0f0040] [ 0.519362] CPU2: Booted secondary processor [4e0f0040] [ 0.551498] CPU3: Booted secondary processor [4e0f0040] [ 0.583770] CPU4: Booted secondary processor [4e0f0040] [ 0.615873] CPU5: Booted secondary processor [4e0f0040] [ 0.616112] Brought up 6 CPUs [ 0.616129] SMP: Total of 6 processors activated. [ 0.616142] CPU features: detected feature: Privileged Access Never [ 0.616151] CPU features: detected feature: LSE atomic instructions [ 0.616160] CPU features: detected feature: User Access Override [ 0.616169] CPU features: detected feature: 32-bit EL0 Support [ 0.617644] CPU: All CPU(s) started at EL2 [ 0.617716] alternatives: patching kernel code [ 0.624021] devtmpfs: initialized [ 0.661696] Initilizing CustomIPI irq domain [ 0.661871] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.661887] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.685280] pinctrl core: initialized pinctrl subsystem [ 0.685508] OS set in device tree is not L4T. [ 0.685792] regulator-dummy: no parameters [ 0.686078] Initializing plugin-manager [ 0.686126] Plugin module not found [ 0.686172] Plugin-manager status disabled [ 0.687423] NET: Registered protocol family 16 [ 0.690177] pstore: using zlib compression [ 0.690201] console [pstore-1] enabled [ 0.690210] pstore: Registered ramoops as persistent store backend [ 0.690221] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.707105] cpuidle: using governor menu [ 0.708154] bpmp: waiting for handshake [ 0.708166] bpmp: handshake completed [ 0.708183] bpmp: synchronizing channels [ 0.708195] bpmp: channels synchronized [ 0.708204] bpmp: mail init ok [ 0.710538] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.710708] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.710715] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.710723] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.710728] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.710734] t19x-arm-smmu 12000000.iommu: nested translation [ 0.710743] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.710751] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.710758] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.710765] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.710771] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.715030] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.715065] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.717626] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.718494] tegra_aon_clk_init: ok [ 0.718507] Registering BPMP clocks... [ 0.718646] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.719213] Serial: AMBA PL011 UART driver [ 0.719330] tegra_powergate_init: DONE [ 0.720428] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.720439] DTB Build time: Jul 26 2021 12:22:25 [ 0.722913] Tegra reboot handler registered. [ 0.729701] iommu: Adding device 14160000.pcie to group 0 [ 0.730262] iommu: Adding device 141a0000.pcie to group 1 [ 0.731537] iommu: Adding device 2490000.ether_qos to group 2 [ 0.731964] iommu: Adding device 3100000.serial to group 3 [ 0.732358] iommu: Adding device 3110000.serial to group 4 [ 0.732666] iommu: Adding device 3140000.serial to group 5 [ 0.733315] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.733471] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.733495] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.733500] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.733505] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.733548] tegra-pmc: PMC Prod config success [ 0.733702] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.733715] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.733977] iommu: Adding device 3460000.sdhci to group 6 [ 0.734428] iommu: Adding device 3210000.spi to group 7 [ 0.734749] iommu: Adding device 3230000.spi to group 8 [ 0.735128] iommu: Adding device 3270000.spi to group 9 [ 0.736139] iommu: Adding device 3160000.i2c to group 10 [ 0.736553] iommu: Adding device c240000.i2c to group 11 [ 0.736939] iommu: Adding device 3180000.i2c to group 12 [ 0.737298] iommu: Adding device 3190000.i2c to group 13 [ 0.737781] iommu: Adding device 31b0000.i2c to group 14 [ 0.738131] iommu: Adding device 31c0000.i2c to group 15 [ 0.738521] iommu: Adding device c250000.i2c to group 16 [ 0.738884] iommu: Adding device 31e0000.i2c to group 17 [ 0.739398] iommu: Adding device sound to group 18 [ 0.739895] iommu: Adding device 3510000.hda to group 19 [ 0.740385] iommu: Adding device bc00000.rtcpu to group 20 [ 0.742330] iommu: Adding device 13e10000.host1x to group 21 [ 0.742703] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.743018] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.743354] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.743687] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.744055] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.744363] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.744688] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.745023] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.745489] iommu: Adding device 15340000.vic to group 30 [ 0.745898] iommu: Adding device 15380000.nvjpg to group 31 [ 0.746249] iommu: Adding device 15500000.tsec to group 32 [ 0.746489] iommu: Adding device 15100000.tsecb to group 33 [ 0.746732] iommu: Adding device 15480000.nvdec to group 34 [ 0.747009] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.747255] iommu: Adding device 154c0000.nvenc to group 36 [ 0.747519] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.747943] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.748307] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.748913] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.749090] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b2000(800000) [ 0.749101] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06af000(3000) [ 0.753007] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.753059] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.753814] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.753855] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.755513] iommu: Adding device 15c10000.vi to group 42 [ 0.755701] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.756014] iommu: Adding device 14800000.isp to group 43 [ 0.756857] iommu: Adding device 16000000.pva0 to group 44 [ 0.757305] iommu: Adding device 16800000.pva1 to group 45 [ 0.757628] iommu: Adding device 15810000.se to group 46 [ 0.758028] iommu: Adding device 15820000.se to group 47 [ 0.758260] iommu: Adding device 15830000.se to group 48 [ 0.758479] iommu: Adding device 15840000.se to group 49 [ 0.758729] iommu: Adding device c1a0000.aon to group 50 [ 0.760026] iommu: Adding device d000000.bpmp to group 51 [ 0.760377] bpmp: ping status is 0 [ 0.760496] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.763567] bpmp d000000.bpmp: probe ok [ 0.765213] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.765594] iommu: Adding device smmu_test to group 52 [ 0.766660] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.766683] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.766703] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.766732] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.766752] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.766771] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.766792] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.766814] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.766835] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.766856] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.766877] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.766898] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.766921] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.766943] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.766964] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.767005] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.767022] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.767094] mc-err: mcerr ops are set to t19x [ 0.772237] iommu: Adding device 2600000.dma to group 53 [ 0.776834] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.778021] GPIO line 339 (wifi-enable) hogged as output/high [ 0.778065] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.778101] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.778373] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.783362] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.783434] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.783472] GPIO line 266 (w-disable1) hogged as output/high [ 0.783506] GPIO line 264 (w-disable2) hogged as output/high [ 0.783539] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.783782] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.785666] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.785678] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.785687] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.786406] iommu: Adding device 3550000.xudc to group 54 [ 0.787099] iommu: Adding device 3610000.xhci to group 55 [ 0.789189] arm64_ras arm64_ras: probed [ 0.789479] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.789533] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.789614] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.789679] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.789739] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.789792] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.789971] carmel_ras_enable: RAS enabled on cpu0 [ 0.790141] carmel_ras_enable: RAS enabled on cpu1 [ 0.790339] carmel_ras_enable: RAS enabled on cpu2 [ 0.790533] carmel_ras_enable: RAS enabled on cpu3 [ 0.790732] carmel_ras_enable: RAS enabled on cpu4 [ 0.790928] carmel_ras_enable: RAS enabled on cpu5 [ 0.791056] carmel_ras carmel_ras: probed [ 0.792389] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.792839] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.793586] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.794340] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.795006] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.795355] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.796393] vdd-ac-bat: 5000 mV [ 0.796774] vdd-sdmmc1-sw: 3300 mV [ 0.797008] vdd-1v8-sd: 1800 mV [ 0.797236] vdd-3v3-cvb: 3300 mV [ 0.797477] vdd-1v8-cvb: 1800 mV [ 0.797778] vdd-epb-1v0: 1000 mV [ 0.797920] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.798203] avdd-cam-2v8: 2800 mV [ 0.798454] vdd-fan: 5000 mV [ 0.798682] vdd-hdmi-5v0: 5000 mV [ 0.798917] vdd_sys_en: 1200 mV [ 0.829343] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.833909] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.834202] SCSI subsystem initialized [ 0.834464] libata version 3.00 loaded. [ 0.834622] usbcore: registered new interface driver usbfs [ 0.834656] usbcore: registered new interface driver hub [ 0.834689] usbcore: registered new device driver usb [ 0.845493] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.848319] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.852909] vdd-1v0: at 1000 mV [ 0.856994] vdd-1v8-hs: at 1800 mV [ 0.860981] vdd-1v8-ls: at 1800 mV [ 0.865010] vdd-1v8-ao: at 1800 mV [ 0.869074] vddio-ddr-1v1: at 1100 mV [ 0.872827] vdd-rtc: at 800 mV [ 0.873852] spmic-ldo1: at 2375 mV [ 0.880889] vdd-ao-3v3: at 3300 mV [ 0.888908] vddio-emmc-3v3: at 3300 mV [ 0.890153] spmic-ldo4: at 1587 mV [ 0.896949] vdd-usb-3v3: at 3300 mV [ 0.904970] vddio-sdmmc1-3v3: at 3300 mV [ 0.908995] vdd-csi-1v2: at 1200 mV [ 0.910262] spmic-ldo8: at 1800 mV [ 0.914452] GPIO line 246 (gpio_default) hogged as output/high [ 0.915407] GPIO line 247 (gpio_default) hogged as output/high [ 0.915692] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.915980] max77620 4-003c: max77620 probe successful [ 0.916650] media: Linux media interface: v0.10 [ 0.916735] Linux video capture interface: v2.00 [ 0.918411] pps_core: LinuxPPS API ver. 1 registered [ 0.918418] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.918441] PTP clock support registered [ 0.918736] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.919003] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.919034] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.921441] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.921512] trusty trusty: selected api version: 3 (requested 3) [ 0.922537] Advanced Linux Sound Architecture Driver Initialized. [ 0.922882] Bluetooth: Core ver 2.22 [ 0.922920] NET: Registered protocol family 31 [ 0.922925] Bluetooth: HCI device and connection manager initialized [ 0.922936] Bluetooth: HCI socket layer initialized [ 0.922944] Bluetooth: L2CAP socket layer initialized [ 0.922966] Bluetooth: SCO socket layer initialized [ 0.925760] camchar: rtcpu character device driver loaded [ 0.926193] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.926271] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.927087] clocksource: Switched to clocksource arch_sys_counter [ 0.965969] VFS: Disk quotas dquot_6.6.0 [ 0.966054] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.966376] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.967745] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.967798] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.968060] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.968068] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.968081] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.968090] nvmap_page_pool_init: Total RAM pages: 1984019 [ 0.968097] nvmap_page_pool_init: nvmap page pool size: 248002 pages (968 MB) [ 0.968262] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.968699] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.970778] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 0.981910] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.982075] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.982233] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 0.982383] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 0.982541] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.983716] la/ptsa driver initialized. [ 0.984004] NET: Registered protocol family 2 [ 0.984821] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.985145] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.985742] TCP: Hash tables configured (established 65536 bind 65536) [ 0.985793] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.985914] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.986351] NET: Registered protocol family 1 [ 0.986880] RPC: Registered named UNIX socket transport module. [ 0.986887] RPC: Registered udp transport module. [ 0.986892] RPC: Registered tcp transport module. [ 0.986897] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.986914] PCI: CLS 0 bytes, default 64 [ 0.987153] Trying to unpack rootfs image as initramfs... [ 1.211397] Freeing initrd memory: 7068K [ 1.226679] host1x 13e10000.host1x: initialized [ 1.228428] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.232841] audit: initializing netlink subsys (disabled) [ 1.232895] audit: type=2000 audit(0.852:1): initialized [ 1.233464] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.239370] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.240359] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.240873] 9p: Installing v9fs 9p2000 file system support [ 1.245447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.245611] io scheduler noop registered [ 1.245799] io scheduler cfq registered (default) [ 1.249657] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.250785] random: fast init done [ 1.283464] iommu: Adding device 2993000.adsp to group 56 [ 1.390423] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.391448] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.403374] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.403861] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.404511] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.404884] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.405304] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.408693] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.408879] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.411712] tsec 15500000.tsec: initialized [ 1.413325] tsec 15100000.tsecb: initialized [ 1.416978] nvdec 15480000.nvdec: initialized [ 1.419831] nvdec 15140000.nvdec1: initialized [ 1.425798] falcon 15340000.vic: initialized [ 1.427964] falcon 15380000.nvjpg: initialized [ 1.429896] falcon 154c0000.nvenc: initialized [ 1.431877] falcon 15a80000.nvenc1: initialized [ 1.435185] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.436878] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.438206] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.439584] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.440978] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.442327] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.443758] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.445065] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.448672] t194-nvcsi 15a00000.nvcsi: initialized [ 1.454456] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.454896] scare-pigeon 14b00000.isp-thi: initialized [ 1.460532] pva 16000000.pva0: initialized [ 1.466105] pva 16800000.pva1: initialized [ 1.470804] nvdla 15880000.nvdla0: initialized [ 1.475810] nvdla 158c0000.nvdla1: initialized [ 1.477345] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.477358] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.477397] tegradccommon 15200000.dc_common: dma mapping done [ 1.477568] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.477577] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.477911] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.477937] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.478204] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.478214] tegra_cec 3960000.tegra_cec: probed [ 1.479108] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.479180] generic_infoframe_type: 0x87 [ 1.479314] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.479366] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.484286] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.484299] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.484311] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.484559] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.484571] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.485490] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.487895] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.487905] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.489750] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.490404] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.490413] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.490763] kfuse 3830000.kfuse: initialized [ 1.491426] tegradc 15200000.nvdisplay: probed [ 1.496930] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.499498] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.500735] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.501511] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.502759] console [ttyTCU0] enabled [ 1.503067] [drm] Initialized [ 1.513399] brd: module loaded [ 1.518366] loop: module loaded [ 1.518441] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.518576] tegra_profiler: auth: init [ 1.519391] THERMAL EST: found 3 subdevs [ 1.519421] THERMAL EST num_resources: 0 [ 1.519439] [THERMAL EST subdev 0] [ 1.519447] [THERMAL EST subdev 1] [ 1.519454] [THERMAL EST subdev 2] [ 1.519497] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.519790] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.519797] THERMAL EST: thz register success. [ 1.520036] THERMAL EST: end of probe, return err: 0 [ 1.520699] sd: No Scsi addr parsed to reserve index [ 1.520732] hisi_sas: driver version v1.6 [ 1.530580] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.530590] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.530601] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.530867] 1 ofpart partitions found on MTD device spi6.0 [ 1.530874] Creating 1 MTD partitions on "spi6.0": [ 1.530884] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.533160] libphy: Fixed MDIO Bus: probed [ 1.533673] tun: Universal TUN/TAP device driver, 1.6 [ 1.533679] tun: (C) 1999-2004 Max Krasnyansky [ 1.534306] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.534312] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.534343] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.534347] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.534380] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.534385] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.534415] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.534420] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.537091] Console: switching to colour frame buffer device 240x67 [ 1.537215] tegradc 15200000.nvdisplay: fb registered [ 1.537536] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.538155] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.538259] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.543203] Parent Clock set for DC plld2 [ 1.595412] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.596113] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.596127] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.621746] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.621754] Extcon AUX1(HDMI) enable [ 1.622247] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.622280] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.622373] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.622461] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 1.622709] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.622719] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.631072] tegradc 15210000.nvdisplay: probed [ 1.631426] tegradc 15210000.nvdisplay: fb registered [ 1.634757] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.634767] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.634779] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.634796] tegradc 15210000.nvdisplay: blank - powerdown [ 1.634811] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.634816] Extcon DP: HPD disabled [ 1.634822] hpd: hpd_switch 0 [ 1.634828] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.634839] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.634848] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.754135] tegradc 15200000.nvdisplay: blank - powerdown [ 1.778020] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.778567] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5 a1 83 [ 1.778581] Using phyrst_lpmode = 1 from DT [ 1.778656] libphy: dwc_phy: probed [ 1.780989] PPP generic driver version 2.4.2 [ 1.781372] PPP BSD Compression module registered [ 1.781377] PPP Deflate Compression module registered [ 1.781395] PPP MPPE Compression module registered [ 1.781399] NET: Registered protocol family 24 [ 1.781490] usbcore: registered new interface driver r8152 [ 1.781524] usbcore: registered new interface driver asix [ 1.781557] usbcore: registered new interface driver ax88179_178a [ 1.781580] usbcore: registered new interface driver cdc_ether [ 1.781619] usbcore: registered new interface driver net1080 [ 1.781646] usbcore: registered new interface driver cdc_subset [ 1.781673] usbcore: registered new interface driver zaurus [ 1.781704] usbcore: registered new interface driver cdc_ncm [ 1.781921] VFIO - User Level meta-driver version: 0.3 [ 1.783140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.783156] ehci-pci: EHCI PCI platform driver [ 1.783184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.783192] ohci-pci: OHCI PCI platform driver [ 1.783219] ohci-platform: OHCI generic platform driver [ 1.787862] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.789851] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4c8c800 id [ 1.790243] usbcore: registered new interface driver uas [ 1.790290] usbcore: registered new interface driver usb-storage [ 1.790353] usbcore: registered new interface driver usbserial [ 1.792412] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.792447] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.792489] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.793217] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.793264] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.793463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.793469] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.793474] usb usb1: Product: xHCI Host Controller [ 1.793480] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.793484] usb usb1: SerialNumber: 3610000.xhci [ 1.793865] hub 1-0:1.0: USB hub found [ 1.793943] hub 1-0:1.0: 4 ports detected [ 1.794523] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.794534] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.794542] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.794749] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.794755] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.794760] usb usb2: Product: xHCI Host Controller [ 1.794764] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.794769] usb usb2: SerialNumber: 3610000.xhci [ 1.795142] hub 2-0:1.0: USB hub found [ 1.795196] hub 2-0:1.0: 4 ports detected [ 1.795819] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.795823] Extcon AUX1(HDMI) disable [ 1.795991] Wake76 for irq=199 [ 1.795994] Wake77 for irq=199 [ 1.795997] Wake78 for irq=199 [ 1.795999] Wake79 for irq=199 [ 1.796002] Wake80 for irq=199 [ 1.796006] Wake81 for irq=199 [ 1.796009] Wake82 for irq=199 [ 1.796056] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.796063] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.796172] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.796246] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.813440] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.813449] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.813472] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.813697] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.814047] mousedev: PS/2 mouse device common for all mice [ 1.814163] usbcore: registered new interface driver xpad [ 1.821932] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.823049] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.869123] tegradc 15200000.nvdisplay: unblank [ 1.871382] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.871673] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.882589] Parent Clock set for DC plld2 [ 1.887377] tegradc 15200000.nvdisplay: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_223m_300m [ 1.888756] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.899432] usb usb2: usb_suspend_both: status 0 [ 1.923656] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.923661] Extcon AUX1(HDMI) enable [ 1.938955] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 1.947423] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.949126] Wake73 for irq=42 [ 1.950410] rtc rtc1: alarm rtc device [ 1.950429] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.950455] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.950621] i2c /dev entries driver [ 1.952805] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.953069] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.953076] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.953522] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.970710] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.970717] Extcon HDMI: HPD enabled [ 1.970743] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.977092] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.977146] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.977504] imx219 9-0010: board setup failed [ 1.977703] imx219: probe of 9-0010 failed with error -121 [ 1.978039] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.001272] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.001321] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.001627] imx219 10-0010: board setup failed [ 2.001814] imx219: probe of 10-0010 failed with error -121 [ 2.003022] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.010289] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.010694] FAN dev name: pwm-fan [ 2.010738] FAN:gpio request success. [ 2.010748] FAN: can't find tach_gpio [ 2.010761] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.010788] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.010973] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.010981] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.011577] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.011588] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.011596] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.011603] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.011611] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.011618] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.011625] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.011632] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.011640] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.011647] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.012422] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.013860] device-mapper: uevent: version 1.0.3 [ 2.014261] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.017894] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.018981] cpuidle: Initializing cpuidle driver [ 2.019940] sdhci: Secure Digital Host Controller Interface driver [ 2.019945] sdhci: Copyright(c) Pierre Ossman [ 2.019948] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.021033] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.022936] CMDQ: cmdq_platfm_init successful [ 2.027830] tegra-se-nvhost 15810000.se: initialized [ 2.028920] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.029512] tegra-se-nvhost 15820000.se: initialized [ 2.030611] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.031712] tegra-se-nvhost 15830000.se: initialized [ 2.032413] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.032966] tegra-se-nvhost 15840000.se: initialized [ 2.033850] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.034975] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.035171] hidraw: raw HID events driver (C) Jiri Kosina [ 2.036925] usbcore: registered new interface driver usbhid [ 2.036929] usbhid: USB HID core driver [ 2.040731] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.041764] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.042344] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.043302] denver_knobs_init:MTS_VERSION:53250041 [ 2.043635] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.044261] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.044633] t19x_cache tegra-cache: probed [ 2.046742] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.046751] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.047344] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.047752] PLL_AON clock registered [ 2.048926] Clocks initialized successfully [ 2.050250] nvpmodel: initialized successfully [ 2.051439] trusty-virtio trusty:virtio: initializing [ 2.051632] trusty_ipc virtio0: vring0: va(pa) ffffffc1e262c000(0) qsz 32 notifyid 1 [ 2.051643] trusty_ipc virtio0: vring1: va(pa) ffffffc1e262e000(0) qsz 32 notifyid 2 [ 2.051809] trusty-virtio trusty:virtio: initializing done [ 2.051922] trusty_ipc virtio0: is online [ 2.052410] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.052844] usbcore: registered new interface driver snd-usb-audio [ 2.063111] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.074771] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.074950] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.075179] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.075351] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.105638] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.119039] mmc0: periodic cache flush enabled [ 2.119059] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.119136] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.119580] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.119804] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.119995] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.120190] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.125095] OPE platform probe [ 2.125200] OPE platform probe successful [ 2.125429] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.157523] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 2.157531] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.157535] usb 1-2: Product: USB2.1 Hub [ 2.157540] usb 1-2: Manufacturer: GenesysLogic [ 2.159059] hub 1-2:1.0: USB hub found [ 2.161335] hub 1-2:1.0: 4 ports detected [ 2.195416] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.195547] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.195655] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.195752] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.195853] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.195958] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.196068] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.196175] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.196285] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.196389] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.196487] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.196572] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.196652] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.196733] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.196811] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.196891] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.196988] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.197091] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.197189] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.197292] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.223502] u32 classifier [ 2.223507] Actions configured [ 2.223573] Initializing XFRM netlink socket [ 2.224084] NET: Registered protocol family 10 [ 2.224880] NET: Registered protocol family 17 [ 2.224894] NET: Registered protocol family 15 [ 2.224952] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.225038] Bluetooth: RFCOMM socket layer initialized [ 2.225055] Bluetooth: RFCOMM ver 1.11 [ 2.225075] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.225082] Bluetooth: HIDP socket layer initialized [ 2.225100] 9pnet: Installing 9P2000 support [ 2.225146] Key type dns_resolver registered [ 2.225403] Registered cp15_barrier emulation handler [ 2.225430] Registered setend emulation handler [ 2.227202] registered taskstats version 1 [ 2.227456] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.228514] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.228533] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.228542] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.228548] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.263852] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.298807] usb 2-3: New USB device found, idVendor=05e3, idProduct=0626 [ 2.298815] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.298820] usb 2-3: Product: USB3.1 Hub [ 2.298825] usb 2-3: Manufacturer: GenesysLogic [ 2.305989] hub 2-3:1.0: USB hub found [ 2.307622] hub 2-3:1.0: 4 ports detected [ 2.475123] usb 2-3: usb_suspend_both: status 0 [ 2.487174] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.743030] tegra-pcie-dw 14160000.pcie: link is down [ 2.743236] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.743262] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.743272] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.743278] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.743283] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.743312] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.743488] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.743715] iommu: Adding device 0004:00:00.0 to group 58 [ 2.744011] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.744036] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.744244] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.744252] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.744328] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.744488] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.744575] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.744690] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.744845] iommu: Removing device 0004:00:00.0 from group 58 [ 2.744878] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.746547] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.747181] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.747376] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.747403] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.855541] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.855565] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.855575] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.855581] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.963114] tegra-pcie-dw 141a0000.pcie: link is up [ 2.963347] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.963355] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.963364] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.963370] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.963375] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.963400] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.963532] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.963742] iommu: Adding device 0005:00:00.0 to group 58 [ 2.964153] pci 0005:01:00.0: [1cd7:0053] type 00 class 0x040000 [ 2.964246] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff] [ 2.964862] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot [ 2.965053] iommu: Adding device 0005:01:00.0 to group 59 [ 2.976372] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 2.976380] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f4003ffff] [ 2.976404] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.976411] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 2.976429] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.976476] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 2.976711] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.976716] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 2.976723] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.976847] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.986703] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 2.991194] tegra194-isp5 14800000.isp: initialized [ 2.997498] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.000670] tegra194-vi5 15c10000.vi: initialized [ 3.004635] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.004772] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.005071] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.009297] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.009352] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.009358] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.009428] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.009495] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.009500] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.013370] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.013413] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.013420] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.013770] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.013823] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.013829] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.014295] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.014336] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.014341] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.014543] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.015465] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.091977] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.092314] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.092476] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.092595] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.093003] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.093062] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.093343] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 3.093347] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.094229] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.094642] Wake83 for irq=211 [ 3.094704] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.094795] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.094940] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.128156] tegra_rtc c2a0000.rtc: setting system clock to 2022-08-30 19:20:04 UTC (1661887204) [ 3.128669] mmcblk mmc0:0001: Card claimed for testing. [ 3.165946] bpmp: mounted debugfs mirror [ 3.171980] ALSA device list: [ 3.171995] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.172002] #1: jetson-xaviernx-ape [ 3.173778] Freeing unused kernel memory: 8640K [ 3.179658] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 3.203858] usb 2-3.1: New USB device found, idVendor=05e3, idProduct=0749 [ 3.203866] usb 2-3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 3.203872] usb 2-3.1: Product: USB3.0 Card Reader [ 3.203876] usb 2-3.1: Manufacturer: Generic [ 3.203880] usb 2-3.1: SerialNumber: 000000001537 [ 3.212151] Root device found: mmcblk0p1 [ 3.213938] Found dev node: /dev/mmcblk0p1 [ 3.230973] usb-storage 2-3.1:1.0: USB Mass Storage device detected [ 3.231346] scsi host0: usb-storage 2-3.1:1.0 [ 3.243991] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.246592] Rootfs mounted over mmcblk0p1 [ 3.270743] Switching from initrd to actual rootfs [ 3.303150] usb 1-2.2: new full-speed USB device number 4 using tegra-xusb [ 3.327370] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b [ 3.327378] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.327383] usb 1-2.2: Product: USB Receiver [ 3.327387] usb 1-2.2: Manufacturer: Logitech [ 3.443190] usb 1-2.3: new full-speed USB device number 5 using tegra-xusb [ 3.449893] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.453399] cgroup: cgroup2: unknown option "nsdelegate" [ 3.468925] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.469605] systemd[1]: Detected architecture arm64. [ 3.469732] usb 1-2.3: New USB device found, idVendor=0403, idProduct=6001 [ 3.469739] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.469744] usb 1-2.3: Product: USB-RS485 Cable [ 3.469748] usb 1-2.3: Manufacturer: FTDI [ 3.469752] usb 1-2.3: SerialNumber: FT4V2E6B [ 3.479740] systemd[1]: Set hostname to . [ 3.566400] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.566414] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.715375] random: systemd: uninitialized urandom read (16 bytes read) [ 3.717979] systemd[1]: Created slice User and Session Slice. [ 3.718161] random: systemd: uninitialized urandom read (16 bytes read) [ 3.719202] systemd[1]: Created slice System Slice. [ 3.719284] random: systemd: uninitialized urandom read (16 bytes read) [ 3.719572] systemd[1]: Listening on Journal Socket. [ 3.722278] systemd[1]: Mounting Huge Pages File System... [ 3.725939] systemd[1]: Mounting POSIX Message Queue File System... [ 3.748526] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.835356] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.110269] systemd-journald[2378]: Received request to flush runtime journal from PID 1 [ 4.252566] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 1537 PQ: 0 ANSI: 6 [ 4.255446] scsi 0:0:0:1: Direct-Access Generic MassStorageClass 1537 PQ: 0 ANSI: 6 [ 4.404031] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.548108] sd 0:0:0:1: [sdb] 249737216 512-byte logical blocks: (128 GB/119 GiB) [ 4.549357] sd 0:0:0:1: [sdb] Write Protect is off [ 4.549503] sd 0:0:0:1: [sdb] Mode Sense: 21 00 00 00 [ 4.550202] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.563857] sdb: sdb1 [ 4.568739] sd 0:0:0:1: [sdb] Attached SCSI removable disk [ 4.695131] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.695372] tegra_cec 3960000.tegra_cec: Sent res: -62. [ 4.695533] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.877325] using random self ethernet address [ 4.877493] using random host ethernet address [ 5.018677] random: crng init done [ 5.018815] random: 7 urandom warning(s) missed due to ratelimiting [ 5.020210] MWEcoCapture: loading out-of-tree module taints kernel. [ 5.027058] Eco Capture 0005:01:00.0: enabling device (0000 -> 0002) [ 5.111606] cpu-throttle-alert cooling device registered. [ 5.119634] gpu-throttle-alert cooling device registered. [ 5.161698] aux-throttle-alert cooling device registered. [ 5.651863] Mass Storage Function, version: 2009/09/11 [ 5.651873] LUN: removable file: (no medium) [ 5.657072] using random self ethernet address [ 5.657241] using random host ethernet address [ 5.697622] rndis0: HOST MAC 36:7d:98:a4:80:30 [ 5.698135] rndis0: MAC 36:7d:98:a4:80:31 [ 5.699247] usb0: HOST MAC 36:7d:98:a4:80:32 [ 5.700377] usb0: MAC 36:7d:98:a4:80:33 [ 5.700404] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.707373] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.707400] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.707433] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.707691] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.707707] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.708153] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.708165] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.708337] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.717118] l4tbr0: port 1(rndis0) entered blocking state [ 5.717126] l4tbr0: port 1(rndis0) entered disabled state [ 5.717764] device rndis0 entered promiscuous mode [ 5.729435] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.731061] Eco Capture: V4L2 device registered as video0 [ 5.734748] Eco Capture: V4L2 device registered as video1 [ 5.736872] l4tbr0: port 2(usb0) entered blocking state [ 5.736879] l4tbr0: port 2(usb0) entered disabled state [ 5.737456] device usb0 entered promiscuous mode [ 5.783262] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.905724] usbcore: registered new interface driver ftdi_sio [ 5.905796] usbserial: USB Serial support registered for FTDI USB Serial Device [ 5.905994] ftdi_sio 1-2.3:1.0: FTDI USB Serial Device converter detected [ 5.906112] usb 1-2.3: Detected FT232RL [ 5.906638] usb 1-2.3: FTDI USB Serial Device converter now attached to ttyUSB0 [ 6.014036] logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3610000.xhci-2.2/input2 [ 6.065011] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.118722] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.329955] zram: Added device: zram0 [ 6.332234] zram: Added device: zram1 [ 6.333916] zram: Added device: zram2 [ 6.334655] zram: Added device: zram3 [ 6.335583] zram: Added device: zram4 [ 6.337033] zram: Added device: zram5 [ 6.387440] zram0: detected capacity change from 0 to 678551552 [ 6.429822] Adding 662644k swap on /dev/zram0. Priority:5 extents:1 across:662644k SS [ 6.432237] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.434018] zram1: detected capacity change from 0 to 678551552 [ 6.451755] Adding 662644k swap on /dev/zram1. Priority:5 extents:1 across:662644k SS [ 6.452209] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.456224] zram2: detected capacity change from 0 to 678551552 [ 6.475311] Adding 662644k swap on /dev/zram2. Priority:5 extents:1 across:662644k SS [ 6.483442] zram3: detected capacity change from 0 to 678551552 [ 6.526079] Adding 662644k swap on /dev/zram3. Priority:5 extents:1 across:662644k SS [ 6.536291] zram4: detected capacity change from 0 to 678551552 [ 6.576664] Adding 662644k swap on /dev/zram4. Priority:5 extents:1 across:662644k SS [ 6.591570] zram5: detected capacity change from 0 to 678551552 [ 6.630879] Adding 662644k swap on /dev/zram5. Priority:5 extents:1 across:662644k SS [ 7.420511] Bridge firewalling registered [ 7.459848] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.611618] input: Logitech K400 Plus as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5 [ 7.624351] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-3610000.xhci-2.2:1 [ 7.863723] Netfilter messages via NETLINK v0.30. [ 7.870959] ctnetlink v0.93: registering with nfnetlink. [ 7.955609] tegradc 15200000.nvdisplay: unblank [ 7.955624] tegradc 15210000.nvdisplay: blank - powerdown [ 8.118089] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.401726] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 9.402865] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.165521] fuse init (API version 7.26) [ 13.567181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.567205] Bluetooth: BNEP socket layer initialized [ 14.697053] tegradc 15200000.nvdisplay: unblank [ 14.697069] tegradc 15210000.nvdisplay: blank - powerdown [ 17.173687] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 34.135225] vdd-sdmmc1-sw: disabling [ 34.135233] vdd-1v8-sd: disabling [ 34.135238] vdd-1v8-cvb: disabling [ 34.135242] vdd-epb-1v0: disabling [ 34.135246] avdd-cam-2v8: disabling [ 34.135251] vdd-fan: disabling [ 34.135255] vdd_sys_en: disabling [ 60.673304] nvgpu: 17000000.gv11b railgate_enable_store:297 [INFO] railgate is disabled. vizgard@vizgardnx2:~$ ```