ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
ERROR: PSM_ModMgr: MODMGR_ERROR 
aurixreset
Info: Executing cmd: aurixreset, argc: 0, args: 
NvShell>INFO: PSM_ModMgr: Powering off 
ERROR: NvCCP_CIM: Fail to initial the LSW 
INFO: NvCCP_CIM: CIM powered off

*************** NvShell Initialization Start******************
DRIVE-V5.2.0-E3550-AFW-Aurix-With3LSS-StepA-4.02.02
Compilation date: Jul 25 2020, 14:21:10
Enter 'help' to see the available commands.

*************** NvShell Initialized  *************************
 Press 'Enter' for NvShell prompt 
*************************************************************


INFO: PSM_ModMgr: Powering up 
INFO: PSM_IoHwAbs: Power On sequence Triggered. 
INFO: PSM_IoHwAbs: Waiting for Voltages to drop below safe margin of 80mV - 
INFO: SftyMon_tmon: Temperature sensor initialized
INFO: PSM_ModMgr: PSM_PwrCtrl_SysPowerOn Reading PG status Timeout Error!
INFO: PSM_ModMgr: SYS_3V3_SYS_1V8_SYS_0V9_PG1, SYS_0V85_SYS_1V0_SYS_1V2_PG,
INFO: PSM_ModMgr: SYS_5V_PG, SYS_3V3_SYS_1V8_SYS_1V5_SYS_1V1_SYS_0V9_PG2,
ERROR: PSM_ModMgr: PSM_IOHWABS_SERVICE_ERROR reported in lModMgr_StTranHndlg 
status
Info: Executing cmd: status, argc: 0, args: 
Alive       : 34:08:00
CPU load     Core 0: 1%
CPU load max Core 0: 2%
CPU load     Core 1: 0%
CPU load max Core 1: 0%
CPU load     Core 2: 0%
CPU load max Core 2: 0%
CPU load     Core 3: 0%
CPU load max Core 3: 0%
CPU load     Core 4: 0%
CPU load max Core 4: 0%
CPU load     Core 5: 0%
CPU load max Core 5: 0%

Hardware information: 
SystemUpInit-Time[ms]: 16


IP-address (Tegra-A): 10.42.0.28
IP-address (Tegra-B): 10.42.0.29
IP-address   (AURIX): 10.42.0.146

MAC-address (Tegra-A): 0x000000044BF66065
MAC-address (Tegra-B): 0x000000044BF66066
MAC-address   (AURIX): 0x000000044BF66067

RAM Usage: 76416 bytes
Command Executed
NvShell>;5Fversion
Info: Executing cmd: ;5Fversion, argc: 0, args: 
Error: Unknown command
Invalid Command
NvShell>;5Fversion
Info: Executing cmd: ;5Fversion, argc: 0, args: 
Error: Unknown command
Invalid Command
NvShell>inforom
Info: Executing cmd: inforom, argc: 0, args: 
Error: Invalid number of arguments
Invalid Command
NvShell>;5FreadNvRam
Info: Executing cmd: ;5FreadNvRam, argc: 0, args: 
Error: Unknown command
Invalid Command
NvShell>poweron
Info: Executing cmd: poweron, argc: 0, args: 
NvShell>INFO: PSM_ModMgr: Powering up 
INFO: PSM_ModMgr: Powering up 
INFO: PSM_IoHwAbs: Power On sequence Triggered. 
INFO: PSM_IoHwAbs: Waiting for Voltages to drop below safe margin of 80mV - 
INFO: SftyMon_tmon: Temperature sensor initialized
INFO: PSM_ModMgr: PSM_PwrCtrl_SysPowerOn Reading PG status Timeout Error!
INFO: PSM_ModMgr: SYS_3V3_SYS_1V8_SYS_0V9_PG1, SYS_0V85_SYS_1V0_SYS_1V2_PG,
INFO: PSM_ModMgr: SYS_5V_PG, SYS_3V3_SYS_1V8_SYS_1V5_SYS_1V1_SYS_0V9_PG2,
ERROR: PSM_ModMgr: PSM_IOHWABS_SERVICE_ERROR reported in lModMgr_StTranHndlg 
readNvRam
Info: Executing cmd: readNvRam, argc: 0, args: 
SW Version: DRIVE-V5.2.0-E3550-AFW-Aurix-With3LSS-StepA-4.02.02
Aurix-Ip     : 10:42:0:146
Tegra X1 IP  : 10:42:0:28
Tegra X2 IP  : 10:42:0:29
Vlan-Port : 0 = 0x7E
Vlan-Port : 1 = 0x7F
Vlan-Port : 2 = 0x23
Vlan-Port : 3 = 0x03
Vlan-Port : 4 = 0x03
Vlan-Port : 5 = 0x07
CAN A BaudRate ConfigId = 0x02
CAN B BaudRate ConfigId = 0x02
CAN C BaudRate ConfigId = 0x02
CAN D BaudRate ConfigId = 0x02
CAN E BaudRate ConfigId = 0x02
CAN F BaudRate ConfigId = 0x02
Command Executed
NvShell>readNvRam
Info: Executing cmd: readNvRam, argc: 0, args: 
SW Version: DRIVE-V5.2.0-E3550-AFW-Aurix-With3LSS-StepA-4.02.02
Aurix-Ip     : 10:42:0:146
Tegra X1 IP  : 10:42:0:28
Tegra X2 IP  : 10:42:0:29
Vlan-Port : 0 = 0x7E
Vlan-Port : 1 = 0x7F
Vlan-Port : 2 = 0x23
Vlan-Port : 3 = 0x03
Vlan-Port : 4 = 0x03
Vlan-Port : 5 = 0x07
CAN A BaudRate ConfigId = 0x02
CAN B BaudRate ConfigId = 0x02
CAN C BaudRate ConfigId = 0x02
CAN D BaudRate ConfigId = 0x02
CAN E BaudRate ConfigId = 0x02
CAN F BaudRate ConfigId = 0x02
Command Executed
NvShell>;5FreadNvRam
Info: Executing cmd: ;5FreadNvRam, argc: 0, args: 
Error: Unknown command
Invalid Command
NvShell>status
Info: Executing cmd: status, argc: 0, args: 
Alive       : 34:08:00
CPU load     Core 0: 1%
CPU load max Core 0: 2%
CPU load     Core 1: 0%
CPU load max Core 1: 0%
CPU load     Core 2: 0%
CPU load max Core 2: 0%
CPU load     Core 3: 0%
CPU load max Core 3: 0%
CPU load     Core 4: 0%
CPU load max Core 4: 0%
CPU load     Core 5: 0%
CPU load max Core 5: 0%

Hardware information: 
SystemUpInit-Time[ms]: 16


IP-address (Tegra-A): 10.42.0.28
IP-address (Tegra-B): 10.42.0.29
IP-address   (AURIX): 10.42.0.146

MAC-address (Tegra-A): 0x000000044BF66065
MAC-address (Tegra-B): 0x000000044BF66066
MAC-address   (AURIX): 0x000000044BF66067

RAM Usage: 76416 bytes
Command Executed
NvShell>;5Finforom
Info: Executing cmd: ;5Finforom, argc: 0, args: 
Error: Unknown command
Invalid Command
NvShell>;5Fpoweroff
Info: Executing cmd: ;5Fpoweroff, argc: 0, args: 
Error: Unknown command
Invalid Command
NvShell>poweroff
Info: Executing cmd: poweroff, argc: 0, args: 
NvShell>INFO: PSM_ModMgr: Powering off 
ERROR: NvCCP_CIM: Fail to initial the LSW 
INFO: NvCCP_CIM: CIM powered off
INFO: PSM_ModMgr: Command executed
poweron
Info: Executing cmd: poweron, argc: 0, args: 
NvShell>INFO: PSM_ModMgr: Powering up 
INFO: PSM_ModMgr: Powering up 
INFO: PSM_IoHwAbs: Power On sequence Triggered. 
INFO: PSM_IoHwAbs: Waiting for Voltages to drop below safe margin of 80mV - 
INFO: SftyMon_tmon: Temperature sensor initialized
INFO: PSM_ModMgr: PSM_PwrCtrl_SysPowerOn Reading PG status Timeout Error!
INFO: PSM_ModMgr: SYS_3V3_SYS_1V8_SYS_0V9_PG1, SYS_0V85_SYS_1V0_SYS_1V2_PG,
INFO: PSM_ModMgr: SYS_5V_PG, SYS_3V3_SYS_1V8_SYS_1V5_SYS_1V1_SYS_0V9_PG2,
ERROR: PSM_ModMgr: PSM_IOHWABS_SERVICE_ERROR reported in lModMgr_StTranHndlg 
version
Info: Executing cmd: version, argc: 0, args: 
DRIVE-V5.2.0-E3550-AFW-Aurix-With3LSS-StepA-4.02.02
Command Executed
NvShell>version
Info: Executing cmd: version, argc: 0, args: 
DRIVE-V5.2.0-E3550-AFW-Aurix-With3LSS-StepA-4.02.02
Command Executed
NvShell>version
Info: Executing cmd: version, argc: 0, args: 
DRIVE-V5.2.0-E3550-AFW-Aurix-With3LSS-StepA-4.02.02
Command Executed
NvShell>
NvShell>inforom
Info: Executing cmd: inforom, argc: 0, args: 
Error: Invalid number of arguments
Invalid Command
NvShell>
NvShell>inforom
Info: Executing cmd: inforom, argc: 0, args: 
Error: Invalid number of arguments
Invalid Command
NvShell>