[application] enable-perf-measurement=1 perf-measurement-interval-sec=1 [source0] enable=1 #Type - 1=CameraV4L2 2=URI 3=MultiURI 4=RTSP type=3 uri=file://../data/20190527_DayRun.mp4 num-sources=1 gpu-id=0 cudadec-memtype=0 [streammux] ## Boolean property to inform muxer that sources are live ## Set to 1 to process @ source framerate, 0 for asap live-source=0 batch-size=1 ##time out in usec, to wait after the first buffer is available ##to push the batch even if the complete batch is not formed batched-push-timeout=40000 ## Set muxer output width and height width=1280 height=720 # config-file property is mandatory for any gie section. # Other properties are optional and if set will override the properties set in # the infer config file. [primary-gie] enable=1 model-engine-file=../engines/resnet10.caffemodel_b30_gpu0.engine #Required to display the PGIE labels, should be added even when using config-file #property batch-size=1 interval=0 #Required by the app for SGIE, when used along with config-file property gie-unique-id=1 config-file=model_basic.txt [tiled-display] enable=1 rows=1 columns=1 width=1280 height=720 [osd] enable=1 border-width=2 text-size=15 text-color=1;1;1;1; text-bg-color=0.3;0.3;0.3;1 font=Serif [sink0] enable=1 type=3 #1=mp4 2=mkv container=1 #1=h264 2=h265 3=mpeg4 codec=1 #encoder type 0=Hardware 1=Software enc-type=0 sync=0 bitrate=2000000 #H264 Profile - 0=Baseline 2=Main 4=High #H265 Profile - 0=Main 1=Main10 profile=0 output-file=data/towncentre_out.mp4 source-id=0 [tests] file-loop=0